2800 OPERATING INSTRUCTIONS

Size: px

Start display at page:

Download "2800 OPERATING INSTRUCTIONS"

Christina Thornton
5 years ago
Views:

1 StarLight 2800 OPERATING INSTRUCTIONS

2 Input port: 5V/1000mA 2. Output port: 5V/1000mA 3. Power Switch 4. Indicator display 5. Flashlight Included items: -HALO StarLight 2800 charger unit -1 USB retractable cable with two micro USB ends -2 connector tips (30 pin and mini USB) -Carrying pouch -Operating Instructions LED Power Indicator During recharging: Red Fully charged: Blue Unit will shine blue while the unit is charging an electronic device

3 Getting Started Charge the HALO StarLight Power Charger until the LED Power Indicator turns blue. This may take up to 6 hours and will fluctuate depending on the charging power source. TM Step 1: Charge the HALO Pocket Power StarLight 2800 TM Important: Charge your HALO Pocket Power Starlight 2800 the initial time for a full 6 hours before regular use. After the initial charge, normal charging will take 5-6 hours. Charging your HALO Pocket Power Starlight 2800: Using the supplied USB charging cable, plug the micro TM USB tip into HALO Pocket Power Starlight 2800 input port (shown above). Next plug the USB connector to a computer or an AC power source with a USB 5V output.

4 TM During charging of the HALO Pocket Power Starlight 2800 unit, the LED will illuminate Red. When the charger reaches 100% fully charged, the LED will illuminate Blue. Step 2: Charging your Personal Electronic Device Important: Please check for voltage compatibility with your device prior to using. Using the supplied USB cable, plug the standard USB connector end into the HALO Starlight charger output port (as shown), insert the appropriate provided tip into your electronic device (You may also use your own USB cable that was supplied with your personal electronic device.), slide the Power Switch down into the ON position to begin charging. The LED will display blue when charging your devices. The LED will turn of automatically when charger is out of power.

5 Step 3: Flashlight Operation Please slide the power switch forward into the flashlight mode. NOTE: Storing your charger When charger is not in use, please slide power indicator to the OFF (middle) position to conserve the battery. SAFETY PRECAUTIONS This product has been designed and manufactured to assure personal safety. Please read the following carefully before using the product. Incorrect operation or incompatibility with your device may result in reduced battery performance or damage to your device. - Carefully read the instruction guide, and use the charger correctly. - CAUTION: The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated. Do not disassemble, expose to heat above 100 C (212 F), or incinerate. Misusing or incorrectly connecting the charging device may cause electric shock to users and damage equipment. Read instructions carefully. The charging device may become warm under extended high

6 power operation. During operation, keep the charging device away from materials that may be affected by these temperatures. - When used correctly, lithium-ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices. - Do not disassemble the charging device. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard. - Do not drop or subject to strong impacts. Do not operate the charging device if it has received a sharp blow, or otherwise been damaged in any way. - Do not expose the charging device to moisture, water, rain, snow or spray. - Do not insert any object into the ports or openings of the charging device. - Never charge device unattended. - There is a risk of the batteries exploding, overheating, or igniting. Do not disassemble, modify, heat or short-circuit the batteries. Do not place them in fires or leave them in hot places. Do not expose to direct sunlight. - Only charge the device by the specified method with the specified USB cable.

7 - In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. - Batteries must be recycled or disposed of properly. Specifications Battery Cell: Samsung Cylindrical Lithium-ion Power Capacity: 2800mAh Rated Input: 5V/1000mA Rated output: 5V/1000mA Charging Time: about 6 hours Cycle life: 500 times Over-charged, over-discharged, excess-current, short circuit protection Operating temperature: 0-45 (30-113) Dimensions: 110*25*25mm Weight: 72g Battery Disposal Special Battery Disposal Instruction for Lithium Ion / LiPO, NiMH. LiFE cell: Dispose of product with lithium ion battery in accordance with your local battery recycling or disposal laws. NOTE: Opening of product and/or removal of battery will render product inoperative and voids manufacturer warranties, dispose of remaining product components in accordance with local laws.

8 DO NOT dispose of unit with general waste. Return it to a battery recycling center. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment (b) This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

9 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna. * Increase the separation between the equipment and receiver * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/tv technician for help. Limited Warranty Halo2Cloud, LLC warrants its products to be free from defects in material and workmanship under normal use conditions, as follows: During the first 1 year from date of purchase, Halo2Cloud, LLC will repair or replace the defective product. Halo2Cloud, LLC will, subject to inspection, repair the defective product or replace it with a new or

10 reconditioned unit. The return must be accompanied by a Return Materials Authorization (RMA) number to be issued upon request and must be shipped prepaid. A shipping rebate will only be extended to the customer in the event that a defect in material or workmanship is confirmed. Warranty is void if the product has been improperly handled or misused in any way, or if the label and/or bar coded warranty label has been removed or tampered with. Warranty returns require a check for $14.95 for processing and handling made payable to Halo2Cloud, LLC. Where applicable, all requests for warranty returns must be accompanied by a proof of purchase and be made to Halo2Cloud, LLC ( The warranty does not extend to the electronic equipment that is used or which incorporates with any of our products and accessories. Halo2Cloud, LLC shall not be held responsible for the improper use of its products. To contact us call (888) Halo2Cloud, LLC 148 Eastern Boulevard, Suite 210 Glastonbury, CT

Operating Instructions

Operating Instructions Contents Introduction 1 Operating Instructions 2-7 Storing/Handling/Cleaning 7 Safety Precautions 7-8 Specifications 9 FCC Compliance Statement 9-10 Limited Warranty 10-11 Contact