AUTOMOTIVE LIFTS. 10,000 Lbs. 2 Post Lift

Transcription

1 AUTOMOTIVE LIFTS s 10,000 Lbs. F10 SKU FOF10N100MBL2,5 Low Profile/Oversized Pads to aise Most Vehicles 3 Stage Front Arms for Symmetric and Asymmetric Lifting Includes (4) 3.5" and 5" Adapter Extenders Warranty: 60 Days Labor, 18 Months Parts, 5 Years Structural 10,000 Lbs. Dual Width Clearfloor Symmetric SKU BENXP10 2,9 Asymmetric SKU BENXP10A 3,0 Low Profile Arm SKU BENXP10LP 3,0 Asymmetric Low Profile Arm SKU BENXP10ALP 3,0 Include or Optional Equipment Challenger SA10 10,000 Lbs. 2 Post Vehicle Lift SKU ,8 CHLSA10 Can Be Configured in Either the Symmetric or Asymmetric Position 3 Stage Front Arms Provide Greater Overall Arm Sweep Double Telescoping Screw Pads to Minimize the Need for Adapters (Truck Adapters Included) Lifting Capacity: 10,000 Lbs. ise: 69 Overall Height: 145 Overall Width: Five Years (60 Months) Warranty on the lift structure Two Years (24 Months) Warranty on the hydraulic cylinder(s) and power unit One Year (12 Months) Warranty on operating components One Year (12 Months) Labor Warranty on site or at factory One Year (12 Months) Free-Shipping* on ground-freight charges related to warranty performance *Free-shipping applies to direct shipping points within the 48 continental United States. ural area shipping surcharge may apply for remote addresses. See BendPak.com for specific terms of warranty. 10,000 Lbs. SKU ,5 CHLQ10 Height Overall: 12' 3-1/2" or 11' 5-1/2" 3 Stage Front Arm and 2 Stage ear Arms Lifts Symmetrically and Asymmetrically Value: $ K Truck Adapter Set SKU CHL ,000 Lbs. SKU Part# CHLQ10 10,000 Lbs. SKU ,8 FOI10 Low Profile 3-5/8 Min. Adapter Height Spot-ite TM 3 Stage Front Arms for Symmetric and Asymmetric Lifting Overall Height: 143-3/8" Overall Floor Width: 137" Maximum Lifting Height: 76" Inside Column Width: 115" Drive Through Clearance: 105" Minimum Ceiling Height: 144" 10,000 Lbs. s SKU OTSPOA10 4,149 Asymmetrical Surface Mounted, Frame Contact Lift Features Electric Hydraulic Operation and Genuine Symmetrical Design for Overhead Design for Clear Floor Lift Factory otated Columns Allow Doors of Vehicle to Be Fully Opened While Properly Positioned On Lift Arm estraints On All Arms Symmetrical Column Orientation Asymmetrical Column Orientation We Carry the Full Line of otary Lifts! Call AZTool1 for Details. SKU OTSPO10 4,149 Symmetrical Brigadier 10ACX SKU DAN ,649 Asymmetric Lifting Capacity: 10,000 Lbs./4,546 Kg Overall Height: 145" / 3,683 mm Overall Width (Outside of Base Plates): 143-1/2" Overall Width (Outside of Columns): 136-1/2" Width Between Columns: 112-3/4" Minimum each (Front Arm): 25"/635 mm Maximum each (Front Arm): 46"/1,168 mm Minimum each (ear Arm): 42"/1,067 mm Maximum each (ear Arm): 60"/1,524 mm Minimum Pad Height: 4-1/2"/114 mm ise: 69"/1,753 mm Maximum Lifting Height (Pad Only): 73"/1,854 mm Maximum Lifting Height (Pad and 6" Adapter): 79"/2,007 mm Drive Thru Clearance: 100-1/2" Motor: 220 VAC 60Hz. 1Ph Hofmann 10,000 Lbs. SKU OUTSIDE BUY/EPO 2,9 HOFEEL731A Vehicles Can Be Positioned and Lifted Symmetrically or Asymmetrically Overall Height Can Be Adjusted 10" Power Column Can Be Arranged On Either the Driver or the Passenger Side Three Stage Front Arms Provide Superior Extended and etracted each Available via Outside Buy/EPO, Call ( ) for details. Truck and Frame Cradle Adapters Part# CHL10318 (Left) and CHL10315 (ight) Value: $ ,000 Lbs. SKU ,1 CHLQ12 Height Overall: 14' 7" or 13' 10" Width Overall: 139-3/4" Drive Thru Clearance: 101" ubber Door Protector Padded Overhead Safety Switch Floor to Overhead: 13' 3-1/2" or 14' 5" 2 Stage Front and ear Arms for Symmetric Lifting 12,000 Lbs. SKU Part# CHLQ12 or Optional Equipment 10,000 Lbs. SKU ,1 CHLCL10V3 Versymmetric 3 Stage Arms Column Height: 11' 3" Adjustable Width Overall: 11' 6-1/2 / 11' 11 Floor to Overhead Switch: 134.5" Ceiling Height equired: 11' 11" Drive-Thru Clearance: 100 / 104-1/2" Designed to lift ANYTHING FOM A COMPACT CA TO A FULL SIZE TUCK. 12,000 Lbs. F12N300 SKU FOF12N300BL 4,5 2 Stage Arms each: 35" to 54" Accommodates Trucks and Many Cars Low Profile 4-3/4" Adapters Includes Four 3.5" and 5" Adapter Extenders Height Configurations of 11-10, 12-10, and Are Available Warranty: 60 Days Labor, 18 Months Parts, 5 Years Structural Include or Optional Equipment 12,000 Lbs. Clearfloor Triple-Telescope Arms Lift SKU BENXP-12C 4,8 Triple-Telescope Arms-All Four to Easily Lift Your Largest Full-Sized Pick Ups and Commercial Vehicles, Yet Still Provide Specific Capability for Sport and Compact Cars Overall Height: 170" Overall Width: 155" Min Pad Height: 5" SAVE $224 10K Truck Adapter Set SKU CHL BUY THIS GET THAT Frame Cradle Adapter Set SKU CHL Works with Challenger 10K Lifts Only 15,000 Lbs. Clearfloor, Standard Arms Lift SKU ,449 BENXP-15C Lifting Capacity: 15,000 Lbs. Overall Height: 170" Overall Width: 155" Minimum Pad Height: 5" ise: 69" ise Time: 45 Seconds Motor: 220 VAC/1 Ph 15,000 Lbs. SKU ,5 FODPO15 Includes Four 4" and Four 8" Truck Adapter Extensions Prices Do Not Customers esponsible for Off-loading Equipment Upon Arrival. Ask Your Sales ep for Details. 40

2 Leasing Terms Available! Ask Your AutoZone Commercial Sales Manager 2 Post Floor Plate Lifts 9,000 Lbs. Low Profile Arm SKU ,0 BENXP9LP Low-Pro Arms that Accommodate Lowered Sports Cars and Those Vehicles with Lift Points Located On the Extreme Outer Edges of the Chassis Shorter Column for Low Ceiling s Column Height: 113" Extended ise Gives You Over 6' of Under Clearance (Truck Adapters Included) Include or Optional Equipment 9,000 Lbs. 2 Post Low Ceiling Lift SKU ,0 BENXP-9F 9,000 Lbs. Lifting Capacity Short Column for Low Ceiling s Wide or Narrow Configuration Single Piece Columns Single Point Safety elease Drop End Arms Provide a Lower Pad Height (Truck Adapters Included) 9,000 Lbs. SKU ,1 FOBP9 Minimum Ceiling Height: 113" Overall Width: 138-1/2" (3,518 mm) Overall Height: 111-1/4" (2,826 mm) Minimum Adapter Height: 3-1/2 Adapter Extenders Included ETL Certified Low Ceilings Are No Problem! Include or Optional Equipment Challenger CLFP9 9,000 Lbs. Floor Plate SKU ,3 CHLCLFP9 3 Stage Front and ear Arms Provide Excellent each to Lift a Variety of Vehicles Drive-Thru Clearance: 98-3/16 Ceiling Height equired: 121-7/8 12,000 Lbs. Floorplate Direct-Drive Lift SKU BENXP-12FD 4,779 Lifting Capacity: 12,000 Lbs. Overall Height: 170" Overall Width: 155" Minimum Pad Height: 5" ise: 69" ise Time: 45 Seconds Admiral 9,000 Lbs. Extended SKU DAN ,649 Perfect for Shops and Garages with Height estrictions Truck and Van Adapter Set Included Quick Lifts: ise Time 45 Seconds! CL10 Versymmetric 10,000 Lbs. 2 Post Dual Pendant Controls Quick Cycle Lift SKU CHL10V3DPCQC 5,749 or Optional Equipment Quick Cycle Technology: Increased ise of Speed to 27 Seconds from 48 Seconds Equating to a 42% Time Savings Lowering Speed Is Held to a Constant 17 Seconds (Approximately) egardless of the Weight of the Vehicle Up/Down Power Button + Dual Single Point Technical Lock elease System Provides Lift Operation from Either Column Express Solution CL10-XP9 10,000 Lbs. Quick Cycle 2 Post Pad Lift SKU CHLCL10XP9QC 7,249 CL10-XP9 2 Post Pad Lifts Come Standard with (4) 1-1/2 and (4) 3 ubber Spotting Blocks and (4) Two Position Adapter Blocks Quick Cycle Technology Means 43% Faster ise Time Storage Lifts 9,000 Lbs. Free Standing or Surface Mounted - Standard Height SKU ,4 CHLQ4P09H ise Height to Top of unway: 73-1/2" Outside to Outside Columns: 112" Overall Length (with amps Attached): 209" Inside Columns: 95" Height of Columns: 84-1/2" Width of unways: 20" Height of unways: 7" Width Between unways: 38" Length of unways: 164" Caster Set SKU CHLQ4P09CS 9,000 Lbs. SKU ,9 BENHD-9 Overall Width: 116-3/4" / 2,965 mm Overall Length: 200 / 5,080 mm Column Height: 88 / 2,235 mm Max. Lifting Height: 74-1/2" / 1,892 mm 8,000 Lbs. EFP8 Home Storage SKU FOEFP8P000M 2,7 Perfect for Home Use Detachable amps Included Casters, Jack Tray and Drip Trays Included Wired to Plug into 115V eceptacle 7,000 Lbs. 4 Post Home Storage / Light-Duty Service Lift SKU ,1 CHLQ4P07 ise Height Underneath unway: 63" Outside to Outside Columns: 100" Overall Length (with amps): 195 1/2" (w/o amps) 165" Inside Columns: 92" Height of Columns: 79-1/2" Width of unways: 20" Height of unway: 4" Width Between unways: 38" Length of unways: 150" Detachable Aluminum Approach amp Length: 36"" 13 Lock Positions Pre-Assembled Lock Mechanism 1HP 110 Volt Plug-In or 220V Power Offer Good Through September 30, While Supplies Last Set of 3 Drip Trays SKU Part# DAN Value: $69. Commander 7,000 Lbs. Part# DAN Commander 7,000 Lbs. DAN ,5 Spring-Loaded Safety Locks On Each Column Self-Lubricating UHMW Polyethylene Internal Slide Blocks Single Safety Lock elease Handle 7,000 Lbs. Capacity Free Standing Design Detachable Drive-Up amps Included 4,500 Lbs. Hand/Hydraulic Operated olling Jack SKU CHLQJ04H J-45 4,500 Lbs. Capacity olling Bridge Jack SKU ,149 BENJ-45 3,500 Lbs. J35BK Hand Pump olling Jack SKU FOJ35BK 4,500 Lbs. Hand/Hydraulic Operated olling Jack SKU CHLQJ03H Prices Do Not Customers esponsible for Off-loading Equipment Upon Arrival. Ask Your Sales ep for Details. 41

3 AUTOMOTIVE LIFTS s 9,000 Lbs. SKU ,4 FOEFP9 Includes: Steel Approach amps, Jack Tray, Wheel Caster Kit and Drip Trays Single Point Lock elease Internal Lock System ETL Certified Major D-12 12,000 Lbs. SKU ,7 DAN Single Hydraulic Cylinder Mounted Underneath unway Internal Anti-Sway Slider Blocks in Each Column Features Heavy Duty 1/2 Aircraft Cable Oversized Self-Lubricating Cable ollers ugged 1-3/8 oller Axles Multi-Position Safety Locks in Each Column amps Feature Non-Skid Surface Column Push-Button Safety elease unways Adjust for Different Tread Widths 14,000 Lbs. SKU ,2 BENHDS14 Overall Width: 130" Overall Length: 241" Max. ise: 70" Motor: 220 VAC/1 Ph (Shown with Optional SCAN FO DETAILS 4,500 Lbs. olling Jack SKU FOJ45G 4 Post olling Bridge Jack DJ-6 SKU ,1 DAN J-7 7,000 Lbs. Capacity olling Bridge Jack SKU ,269 BENJ-7 14,000 Lbs. SKU ,4 FOC14N100 Heavy Duty Hydraulic Cylinder Single Point Latch elease System 78-3/4 ise 18 Lock Positions Include or Optional Equipment Accommodates Wheelbase Vehicles High Performance Cable and Sheave System ETL Certified Model Shown Is C14N100 Challenger 4P14 14,000 Lbs. SKU CHL4P14EFX 5,5 Louvered Approach amps for Positive Vehicle Traction Adjustable unways to Accommodate a Variety of Tread Widths Column Height: 90-1/2" Minimum Bay Size: 12' x 24' 18,000 Lbs. 4 Post General Service Lift SKU ,9 FOC18 Max. Wheelbase: 194" Durable Cable and Sheave System ETL Certified to ANSI/ ALI ALCTV: ,000 Lbs. Long Wheelbase SKU ,7 FOC18LW Max. Wheelbase: 230" 7,000 Lbs. olling Jack SKU ,9 FOJ70G 7.7K olling Jack SKU ,2 CHLJ75 9,000 Lbs. olling Jack SKU ,9 FOJ Accessories ubber 2 Post Lift Pad/ Slip Over/ ound - 1 Each SKU BEN Slip Over ubber Lift Pad for Use with Bendpak s with ound Flat Contact Pads. Sold Individually Square ubber Arm Pads (1 Each) SKU BEN Each Works with Any BendPak 5-5/8" Square 1-1/16" Thick Frame Cradle Pad (1 Each) SKU BEN Perfect for Use with Any BendPak Tactile ubber Mat educes Slippage and Protects Finish Frame Cradle Pad (1 Each) SKU DAN I10 2 Post Carriage Door Bumper Kit SKU FOTPB10-D1 Use with Forward FOI10 ound ubber Lift Pad Assembly Drop-In (1 Each) SKU BEN Works with Any BendPak 1 Lift Pad 5" Diameter for Enhanced Stability Easy Drop-In Design I10 ubber Adapter Pad Kit SKU FO4105 Use with Forward FOI10 Eliminates Metal to Metal Contact at Vehicle Lift Points Includes (4) Pads and Attaching Hardware I10 Adjustable Adapters (Set of 4) SKU FOT Use with Forward FOI10 Included ubber Pad Eliminates Metal to Metal Contact Adapters Have Ears to Cradle Frames Don't Let the Tire Make You Tired! Omega Wheel Arm SKU OMG92100 Holds the Tire at Lift Arm Height and Is Handy with Tire otations and Brake Jobs Easy and Safe for Mechanics to Put On or Take Off Tires Avoid Bending Over to Put Down or Pick Up a Tire Fits Most Lift Arms 3" - 5" Wide Set Includes (2) Wheel Arms and (2) Magnetic Tool Trays While Supplies Last Set of 2 Accessories 2 Drip Trays SKU BEN Caster Wheel Set SKU BEN52107 For Use On HD-9 Series Lift Only olling Oil Drain SKU BENDP-30 Include Tires or ims INCLUDES: 2 ound Magnetic Trays $19 Value Adjustable Width: 33" - 60" Prices Do Not Customers esponsible for Off-loading Equipment Upon Arrival. Ask Your Sales ep for Details. 42

4 Leasing Terms Available! Ask Your AutoZone Commercial Sales Manager Tuxedo Distributors, LLC, is a leading importer of high quality automotive repair equipment offering a full line of automotive equipment at an economical price. With our 15 satellite warehouses strategically located across the US, we offer an unparalled competitive advantage. Approved Outside Buy Vendor Call to place order! Toll Free TWO POST LIFTS TLT240SC 9,000lbs CAPACITY 2,0 TLT240SC TLT240SB 9,000lbs CAPACITY 1,9 9,000 lb. lifting capacity Overall Height: 151 (TLT240SC) Overall Width: Symm 134, Asymm 140 (TLT240SC) Overall Height: 113 (TLT240SB) Overall Width: 133 (TLT240SB) ubber Door Guards Hose Guards Dual Point Lock elease Heavy-Duty Arm estraint System Double Telescoping Screw Pads Adjustable Column Width (TLT240SC) Standard or otated Asymmetric Columns (TLT240SC) TLT240SB Floorplate Model Clear Floor Model TP9KAC 1,949 9,000lbs CAPACITY TP9KF 1,949 9,000lbs CAPACITY TP9KAC 9,000 lb. lifting capacity Overall Height: 142 (TP9KAC) Overall Width: 141 (TP9KAC) Overall Height: 111-1/2 (TP9KF) Overall Width: 141 (TP9KF) Chain Driven Dual cylinders with low friction chain rollers Low profile arms 1-1/2 and 5 stackable drop-in height adapters Automatic safety cut-off bar (TP9KAC) Mounting Hardware included Powder-Coated Finish Clear Floor Model TP9KF Floorplate Model TLT210-XT 10,000lbs CAPACITY 2,7 10,000 lb. lifting capacity Overall Height: 149 Overall Width: Symm 137, Asymm 138 Heavy-Duty Arm estraint System Adjustable Column Height Adjustable Column Width Outer Hose Guards Stackable Foot Pad Extensions two 6 and two 3 3 Stage Front Arms ubber Door Guards Single Point Lock elease Standard or otated Asymmetric Arm Configuration Double Telescoping Screw Pads offering 6.5 adjustment for complete vehicle coverage Standard Asymmetric Arm Configuration otated Asymmetric Arm Configuration TP11KC-DX 11,000lbs CAPACITY 2,7 11,000 lb. lifting capacity Direct Drive Cylinders Overall Height: 145 Overall Width: 145-1/2 3 Stage Front Arms, Low Profile Arms Asymmetric/ Symmetric Arm Configuration Symmetric Columns Single Point Lock elease ubber Door Guards Mounting Hardware included Spin Up Pads with 2 and 4 stackable drop in Truck Adapters Powder-Coated Finish BI-SYMMETIC TM DESIGN Asymmetric/Symmetric arm configuration with 180 degree front arm rotation. TP12KC-DE 3,9 12,000lbs CAPACITY 12,000 lb. lifting capacity Overall Height: 165 Overall Width: 151-1/8 Direct Push Drive Cylinders Extra Long (48 ) carriage Padded overhead cutt-off bar Single Point Pneumatic Lock elease 2-1/2 and 5 Stackable Drop in Adapters Mounting Hardware included Powder-coated finish STOAGE LIFT FP8K-DS 8,000lbs CAPACITY TC-530 Semi-Automatic Tire Changer 1,5 Internal Clamping Capacity: External Clamping Capacity: Max Wheel Diameter: 38 Wheel Width: 3-12 Swing arm design Bead seating inflation jets are integrated in the clamping jaws Side mounted Bead Breaker 2,5 8,000 lb. capacity Overall Height:86-1/4 Overall Weight:103-1/2 Overall Length:207-1/8 Ladder lock safety system with auto engage locking bar Extra-large slider blocks for added stability 10 Lock Positions Aircraft quality cables Single Point Lock elease 18 Wide non-skid, diamond plate runways Casters, Jack Tray, and Approach amps included WHEEL SEVICE TC-950 1,6 Semi-Automatic Tire Changer TC-950-WPA High Performance Tire Changer with Press Arm 2,6 Internal Clamping Capacity: External Clamping Capacity: Max Wheel Diameter: 47 Wheel Width: 3-15 Swing arm design Bead seating inflation jets are integrated in the clamping jaws Twin clamping cylinders provide more power to hold the most difficult rims Conveniently located and powerful bead breaker Large diameter hex mount/demount shaft for extra rigidity Left side press arm (WPA) Ideal for low profile tires (WPA) No scratching, machine never contacts rim (WPA) SEVICE LIFT FP14K-C 14,000lbs CAPACITY Service Lift 14,000 lb. lifting capacity Overall Height: 68-7/8 Overall Width: 136-3/4 Overall Length: 250-1/2 Cable Driven 4,9 Closed Front Single point pneumatic safety release 20 wide non-skid, diamond plate runways Mounting Hardware included Powder-Coated Finish Also sold as an Alignment Lift BIDGE JACK AJ-8K 8,000lbs CAPACITY 1,5 Universal oller Body Design w/dual spring loaded precision roller bearing and Side Guide Wheels w/adjustable Height for Low, Medium, and High Jack ail Configurations olls on top edge of Jack ail for smooth maneuverability Dual Height Telescoping Support Arms Pneumatic operation w/adjustable Pressure egulator Stackable Pad and Height Adapers 1 5/16 and 5 (1 Pair each) Dual Air Bags WB ,0 Wheel Balancer Max Wheel Diameter: 35 im Width: im Diameter: Wheel Weight Capacity: 143 lbs Self-calibrating Optimization program Static balancing Three centering cones Speed nut and caliper standard WB-953 High Performance Wheel Balancer Max Wheel Diameter: 39 im Width: im Diameter: Wheel Weight Capacity: 150 lbs Self-calibrating; Self-diagnosis Optimization program WB-448 Heavy Duty Truck Wheel Balancer 1,249 Static balancing Three centering cones Hood, hammer, speed nut and caliper come standard Optional motorcycle adapter is available 2,4 Max Wheel Diameter: 47 im Width: im Diameter: Wheel Weight Capacity: 298 lbs Self-calibrating; Self-diagnosis Pneumatic Wheel lift included Foot brake for manual stop Capable of balancing a full range of wheels Car and Truck cones come standard 43

5 AUTOMOTIVE LIFTS Lift Accessories for 2 and SKU DAN Add 20 Amp Outlets, Air Functionality and Tool/Line Holders, By Attaching this to Your SKU BENWSA Adds Air and Electric Capabilities to Any BendPak Lift Simple, Safe and Extremely Easy-to-Use (4) 110V GFI Outlets, Oiler, Air Supply, Pressure Gauge, Storage Hooks for Hose and Tools, egulator/ Filter, Air Inlet Fits 2 or s You Will Need to Know BendPak Lift Model # When Ordering for s SKU CHL Convenient Power Source for Extension Lights and Other Tools Air Supply Will Always Be at Arms each for Facilities Using Pneumatic Tools Such As Impact Wrenches SKU FO Use with Forward FOI10 with Air egulator and Oiler Does Not Include Hose and Air Gun. Mid-ise Lifts 6,000 Lbs. Surface Mount Mid-ise Pad Lift SKU BENMDS-6K 2,349 For Servicing Passenger Cars, SUVs and Light-Trucks Lifting Height (Less Lift Blocks ): 44 Comes Four ubber Contact Blocks Providing Fast Vehicle Set Up 6,000 Lbs. Flush Mount Mid-ise Pad Lift SKU BENMDS-6KF 2,349 Fully Open Center Design for Servicing Passenger Cars, SUVs and Light-Trucks Lifting Height (Less Lift Blocks ): 44 ( 4.25" for Sub Floor) Includes Four ubber Contact Blocks Providing Fast Vehicle Set Up 6000XL Mid-ise Scissor Lift SKU ,749 DAN For Servicing Light-Duty Cars and Trucks Portable Motor Cart Serves as Tow Handle Adjustable Arm Assemblies Safety Bar with Multiple Lock Positions SCAN FO DETAILS 49" 6,000 Lbs. Mid-ise Lift SKU ,9 FO6000ML Width: 41" ise: 52" Multiple Locking Positions Truck Adapters Included FOLIFTGATE " 6,000 Lbs. Portable Mid-ise Lift SKU ,049 BENMD-6XP Portable, Easy to Move from Bay-to-Bay Adjustable Arms Lifting Capacity: 6,000 Lbs ANLIFTGATE Include or Optional Equipment Power Unit Plugs into 110v Outlet SKU DANLIFTGATE olling Work Seat SKU Part# DAN Value: $49. MaxJax 6,000 Lbs. Portable SKU ,2 DAN Perfect for Low Clearance Ceilings and Home Garages Built-In Wheels that Allow You to Store It Out of the Way When Not in Use Max. Lift Height (with 3" Adapter): 52" SKU DANLIFTGATE MaxJax 6,000 Lbs. Portable SKU Part# DAN Low-ise Lifts 6,000 Lbs. Low-ise Pad Lift SKU ,669 BENL-60 Max. Height: 26 Overall Width: 70 Overall Length: 82 Portable SKU ,749 BENL-60P Max. Height: 26 Overall Width: 70-1/2 Overall Length: 82 7,000 Lbs. Low-ise Pad Lift SKU ,349 FOTL07 Wired to Plug into 115V eceptacle Max. ise: 24-3/4" Include or Optional Equipment 10,000 Lbs. Low-ise Pad Lift SKU ,649 BENL-5T Max. Height: 23" - 32" Lowered Height: 4" Lift Blocks Included ANLIFTGATE Include or Optional Equipment ANLIFTGATE FOLIFTGATE Motorcycle Lifts Motorcycle Jack SKU FOBJ10 Use with Forward FO100MCL 1,000 Lbs. Air Operated Motorcycle Lift SKU ,049 FO1000MCL Includes Wheel Vise and Two 12' Extensions, Making it Great for Motorcycles, ATVs, Lawn Mowers, Golf Carts, Etc. ise: 33", Length 93", Width 24", Width With ATV Adapters 48" 1,000 Lbs. Droptail Motorcycle Lift SKU FO1000MCLDT1,249 FOBJ10 Included ise 33" Length 93", Width 24" FOLIFTGATE Motorcycle Lift SKU ANML-1500XL Lifting Capacity: 1,500 Lbs. / 682 kg Power Supply: Air/Hydraulic Main Platform Length: 89" / 2,286 mm Main Platform Length with Front Extension: 102" / 2,591 mm Main Platform Width: 30" / 762 mm 1,449 FOLIFTGATE ANLIFTGATE Prices Do Not Customers esponsible for Off-loading Equipment Upon Arrival. Ask Your Sales ep for Details. 44

6 Leasing Terms Available! Ask Your AutoZone Commercial Sales Manager 2-POST LIFTS D-2-9X SKU DAN POTABLE LIFT MaxJax SKU DAN ,2 Lifting Capacity: 6,000 lbs Overall Height: 89" Fully Adjustable Lift Arms Easy Set-Up and Use D-10 AC 2,649 SKU DAN Lift Capacity 9,000 lbs Floorplate Style Overall Height: 113" ise: 74" Lifting Capacity: 10,000 lbs Overall Height: 145" ise: 69" Overall Width: 130-1/2" ASYMMETIC WIDE D-10 ACX SKU olling Work Seat DAN SKU Part# DAN ,649 Overall Width: 143-1/2" ASYMMETIC WIDE Value $49. D-10 CX SKU ,5 DAN MaxJax 6,000 Lbs. Portable SKU Part# DAN ,649 Overall Width: 145" SYMMETIC WIDE Offer Good Through September 30, 2016 While Supplies Last ALIGNMENT LIFT D-12A COMBO Cadet-6000XL DAN DAN SKU ,4 SKU Lifting Capacity: 12,000 lbs Overall Width: 130" Overall Length: 248" Max ise: 66" Turn Plates Included SKU DAN AILINE KIT DAN DAN SKU ,1 D ,5 DAN ,7 D-7X DAN Extended version of D-7 Overall Length: 227-1/2" LIFT OPTIONS LIFT PAD ASSY OUND 8-GAL OIL DAIN 8-Gal Capacity Adjustable D-10Height: ACX48-67" Wide SKU Drain Pipe for Draining Oil Quickly PAT NUMBE LargeFunnel mouth to Catch Product Description Oil & educe Spillage Product Description DAN For 2-Post Lifts Sturdy Steel Construction Tactile ubber Mat Product Description 49 Works with 2-Post Lift Thick ubber Construction Easy Drop-In Design 5" Diameter ND SLIP OVE PAD SKU SKU DAN esistant to Gouging Abrasion esistant Tear esistant Sold Individually 359 SKU DIP TAYS Works with Any LIft 4 110v GFI Outlets Oiler, Air Supply, PSI Gauge, Storage Hooks for Hose and Tools, Air Inlet Set of 3 Lightweight Pans Intended for Oil & Water-Based Fluids Product Description 239 DAN SKU DAN ,5 Max Wheel Diameter: 50" Machine Weight: 507 lbs im Width: 3-15" Inside Clamp: 15-25" Outside Clamp: 12-22" DAN GAL OIL DAIN SKU DAN B-100 WHEEL BALANCE SKU DAN ,449 Max Wheel Diameter: 44" im Width: " im Diameter: 1-28" PM: 140 Include Tires or ims Gal Capacity 15" Drainage Funnel Product Description Includes egulator and Gauge Ton Capacity Extra Tall & Stable Min Height : 68.7" Max Height: 76.7" 50' HOSE EEL SKU DAN OLLING WOK SEAT SKU DAN Capacity: 205 lbs Depth: 14-1/2" Overall Height: 14" 1 50' of 3/8 of ubber Hose Working Pressure: 250psi Max CFM: 25 4 Way Non-Snag ollers SAVE $50 Include Tires or ims Shown is OPTIONAL Power Assist Arm TIPOD JACK STAND SKU TIE SEVICE Product Description Product Description 14" x 13.5" x 2" Smooth Bearings Sturdy Construction Sold Individually AI-ELEC WOK STATION SKU TUNPLATES 19 T-100 TIE CHANGE DAN Part# DAN SHOP SKU SKU Part# DAN Commander 7,000 Lbs. Offer Good Through September 30, 2016 While Supplies Last SKU Set of 3 Drip Trays Value: $69. FAME CADLE PAD SKU 28 DAN ,6 SKU DAN Lifting Capacity: 7,000 lbs Visible Locking System Overall Length: 203-1/2" Lifting Capacity: 12,000 lbs Overall Width: 130" Overall Length: 248" Max ise: 66" DAN ,749 Lifting Capacity: 6,000 Lbs. Max ise with 6 Adapter: Max ise with 3 Adapter: 46.5 Include or Shipping Weight: 792 Vehicles, Optional Equipment SKU POST LIFTS D-12A DJ-6 (Qty 2) SCISSO LIFT TANSMISSION JACK SKU DAN EG. $530. First Stage: 1,000 lbs Second Stage: 500 lbs Min 34" - Max 71" Heavy-Duty Steel Swivel Casters igorous Safety Overload System Controlled Pneumatic Descent for Safe Lowering 45