Flat Galaxy - Above 30 Deg. DEC
|
|
|
- Stewart Taylor
- 5 years ago
- Views:
Transcription
1 Const. Object ID Other ID RA Dec Size (arcmin) Mag Urano. Urano. Millennium Notes CVn 45 NGC Vol II Note: Com 335 NGC Vol II Note: Slightly asymmetric dust lane Dra 946 NGC Vol II Note: Vir 315 NGC Vol II Note: Dust spots Vir 579 NGC Vol II Note: Eccentric dust lane UMa 1 NGC Vol II Note: Vir 449 MCG Vol II Note: Four knots in the centre CVn 495 NGC Vol II Note: Hya 68 IC Vol II Note: Dust lane. Knots Dra 994 NGC 5965(1) Vol II Note: Ant 168 IC Vol II Note: Dust lane Boo 747 NGC Vol II Note: Dust lane Hya 1500 MCG Vol II Note: Ari 558 UGC Vol I Note: Boo 761 UGC Vol II Note: Single condensations CVn NGC Vol II Note: Two-layers Com 16 NGC Vol II Note: In quartette UMa 177 UGC Vol II Note: Sex 1654 NGC Vol II Note: Tr 384 UGC Vol I Note: Psc 95 NGC Vol I Note: Two-layers Oph 334 UGC Vol III Note: Nucleus is not seen Vir 731 NGC Vol II Note: Slightly curved Sex 1876 NGC Vol II Note: Ser 3111 UGC Vol III Note: Dust lane Vir 70 NGC Vol II Note: Dust lane on SE side.v.f. halo CVn 197 UGC Vol II Note: Leo 1945 NGC Vol II Note: Dust lane Lyn 1340 IC Vol II Note: Eri 677 NGC Vol I Note: Vir 58 NGC Vol II Note: Vir 7 NGC Vol II Note: Two-layers.Bar.Splitted N-edge Cam 895 UGC Vol I Note: Boo 774 UGC Vol II Note: UMa 1537 NGC Vol II Note: Badge. Irr. compan. at 3.8 W Psc 4081 UGC Vol III Note: Lib 860 MCG Vol II Note: Very dusted
2 40 Vir 501 ESO 576-G Vol II Note: Two-layers 41 Vir 6 NGC Vol II Note: Dust lane 4 Com 46 UGC Vol II Note: 43 Hya 1893 ESO 569-G Vol II Note: 44 Tr 553 NGC Vol I Note: Dust lane 45 Ser 309 IC Vol III Note: Dust lane 46 CVn 594 NGC Vol II Note: Two-layers 47 Vir 84 IC 33(A) Vol II Note: Dust lane 48 Com 39 NGC Vol II Note: 49 UMa 093 UGC Vol II Note: 50 Lyn 144 NGC Vol I Note: Two-layers 51 Ari 547 UGC Vol I Note: Dust patches.wavy.curved W end 5 Ser 301 UGC Vol II Note: Dust lane 53 Dra 878 NGC Vol II Note: Diffuse compan.1.0 at.5 SE 54 CVn 336 UGC Vol II Note: 55 Sex 1814 UGC Vol II Note: Bar. Edges of differ.thickness 56 Lyn 146 UGC Vol II Note: Knotty 57 Lyn 1339 UGC Vol II Note: Dust lane through nucl. 58 Eri 61 NGC Vol I Note: 59 Vir 381 NGC Vol II Note: Slightly eccentric dust lane 60 Pyx 1431 ESO 563-G Vol II Note: Diffuse halo around nucleus 61 Gem 1194 NGC Vol I Note: 6 Cet 55 UGC Vol I Note: 63 Cet 179 MCG Vol I Note: Sp. gal. 1.6 at 3.8 N 64 Vir 49 MCG Vol II Note: 65 Vir 77 NGC Vol II Note: V.faint halo. Dust lane 66 Leo 083 UGC Vol II Note: Diffuse.Knotty.DwSph at.0sw 67 Leo 1906 NGC Vol II Note: Interact.w.gal.at 3.5S 68 Leo 1830 NGC Vol II Note: 69 Hya 1504 ESO 564-G Vol II Note: Very dusty 70 Cnc 14 UGC Vol II Note: 71 Cam 1000 UGC Vol I Note: 7 Cas 634 UGC Vol I Note: Blue, without condensations 73 Cet 633 UGC Vol I Note: 74 Sgr 3507 ESO 460-G Vol III Note: Dust lane. Gal.over W side 75 Dra 3478 UGC Vol III Note: Compan. 0.8 at 3.4 NW 76 Boo 86 NGC Vol II Note: Dust. Knots. In group
3 77 Boo 776 UGC Vol II Note: 78 Vir 444 MCG Vol II Note: Dust lane 79 UMa 443 UGC Vol II Note: 80 Hya 373 MCG Vol II Note: 81 UMa 0 UGC Vol II Note: 8 Sex 1700 MCG Vol II Note: Two-layers. 83 Lyn 158 IC Vol II Note: 84 Cam 117 UGC Vol I Note: S-shaped. Chain of knots 85 Lep 970 NGC Vol I Note: Dust lane 86 Eri 766 MCG Vol I Note: Eccentric dust lane 87 Eri 600 NGC Vol I Note: Knotty 88 Psc 318 NGC Vol I Note: 89 Psc 06 UGC Vol I Note: F. filamentary periphery 90 Cet 161 ESO 540-G Vol I Note: Two-layers 91 Psc 10 UGC Vol I Note: Interact.w.compan.at.4W 9 PsA 3935 ESO 467-G Vol III Note: Knotty.In pair?compan.at.3nw 93 Ser 974 UGC Vol II Note: 94 Lib 895 ESO 581-G Vol II Note: 95 Vir 441 MCG Vol II Note: Slightly eccentric dust lane 96 Vir 346 IC Vol II Note: Slightly curved."malin 1"-type 97 Vir 85 UGC Vol II Note: Dust lane 98 Cam 18 UGC Vol II Note: 99 Crv 16 ESO 505-G Vol II Note: "Stick" 100 LMi 1796 NGC 345A Vol II Note: El. gal. at 0.8 SE 101 UMa 1467 UGC Vol II Note: Compan. 0.5 on the E side 10 Pyx 141 ESO 563-G Vol II Note: Curved. Irr.compan.at.0 W 103 Cnc 1306 UGC Vol II Note: Dust lane 104 Eri 777 MCG Vol I Note: 105 Cet 396 MCG Vol I Note: Dust lane. compans at.,3 NW 106 Peg 396 UGC Vol III Note: Two-layers 107 PsA 3903 ESO 533-G Vol III Note: 108 Dra 3188 UGC Vol III Note: Dust lane 109 Ser 3043 UGC Vol II Note: Companion at.5se.dust lane 110 UMa 74 NGC 556(1) Vol II Note: Two-layers.Sp.gal.0.9 at 0.5W 111 Vir 504 NGC Vol II Note: El. gal. at 7.0 W 11 Vir 45 UGC Vol II Note: 113 Com 10 UGC Vol II Note: S-shaped
4 114 Com 164 IC Vol II Note: Two-layers.Compact gal.at 6.0S 115 Leo 100 UGC Vol II Note: Dust lane. Eroded S edge? 116 Ant 1747 ESO 436-G Vol II Note: Star proj. near the centre 117 Leo 1603 UGC Vol II Note: Dust lane.6 small neighbours 118 Eri 7 MCG Vol I Note: 119 Eri 640 NGC Vol I Note: 10 Cet 501 UGC Vol I Note: 11 Scl 14 ESO 473-G Vol I Note: Dust lane 1 Peg 4106 UGC Vol III Note: Compact compan.at S near nucl. 13 Peg 4083 UGC Vol III Note: N end is more sharp and curved 14 Aqr 3651 MCG Vol III Note: Dust lane 15 Dra 3470 UGC Vol III Note: 16 Vir 80 IC Vol II Note: Slightly curved 17 Leo 10 UGC Vol II Note: 18 Leo 1743 UGC Vol II Note: Asteroid's track at.3 W 19 Sex 169 UGC Vol II Note: S-side broader than N one 130 Lyn 1301 UGC Vol II Note: 131 Gem 1190 UGC Vol I Note: 13 Tr 58 UGC Vol I Note: Bluish 133 Peg 56 UGC Vol I Note: Blue.Patchy.Sp.gal.at 0.5 SE 134 Peg 4039 UGC Vol III Note: Dust spots 135 Peg 3911 UGC Vol III Note: Br.gal. at optical pair? 136 PsA 3793 ESO 531-G Vol III Note: Two-layers? Slightly curved 137 Ser 98 UGC Vol II Note: Star projected 138 Hya 835 ESO 51-G Vol II Note: Dust lane 139 Com 391 NGC Vol II Note: Fluffy "pimpled" N side 140 Vir 313 IC Vol II Note: 141 Com 69 IC Vol II Note: 14 Hya 57 ESO 506-G Vol II Note: Two-layers.Member of wide pair 143 Vir 4 IC Vol II Note: 144 Vir 33 IC Vol II Note: Winding 145 Cam 131 UGC Vol II Note: Two-layers 146 Pup 190 ESO 494-G Vol I Note: 147 Eri 910 IC Vol I Note: 148 Cet 416 IC Vol I Note: Two-layers 149 Cet 411 ESO 477-G Vol I Note: 150 Tr 363 UGC Vol I Note:
5 151 Her 339 UGC Vol III Note: Two-layers? Ring-like gal.on W 15 Her 3114 UGC Vol III Note: Two-layers. Curved N end 153 Boo 936 UGC Vol II Note: 154 Lib 781 ESO 511-G Vol II Note: Dust lane. V. faint ends 155 Vir 595 UGC Vol II Note: Two-layers 156 Vir 517 MCG Vol II Note: El. gal. 0.7 at.0 NE 157 Com 411 UGC Vol II Note: 158 Vir 399 MCG Vol II Note: Sp. gal. 1. at.5 SE 159 CVn 386 UGC Vol II Note: 160 Vir 344 UGC Vol II Note: Faint second layer? 161 UMa 16 UGC Vol II Note: Br.sp. at 6.0 E 16 Crt 085 MCG Vol II Note: V.f.curved extentions of arms 163 UMa 171 UGC Vol II Note: Blue condensation 164 Leo 1670 UGC Vol II Note: Dust lane 165 Lyn 165 UGC Vol I Note: 166 Gem 163 IC Vol I Note: Dust spots 167 Gem 10 UGC Vol I Note: "Pimpled" 168 Cam 110 UGC Vol I Note: 169 Lep 105 ESO 555-G Vol I Note: 170 Cet 560 UGC Vol I Note: Dust lane 171 Tr 514 UGC Vol I Note: Blue knots 17 Ari 504 UGC Vol I Note: 173 Psc 439 IC Vol I Note: 174 And 15 UGC Vol I Note:
6
Flat Galaxy - Constellation
1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 17 18 19 0 1 3 4 5 6 7 8 9 30 31 3 33 34 35 36 37 38 39 Const. Object ID Other ID RA Dec Size (arcmin) Mag Urano. Urano. Millennium Notes And 15 UGC 433 00 41 03.6 +31
COMMISSIONS 27 AND 42 OF THE IAU INFORMATION BULLETIN ON VARIABLE STARS Number 6010
COMMISSIONS 27 AND 42 OF THE IAU INFORMATION BULLETIN ON VARIABLE STARS Number 6010 Konkoly Observatory Budapest 18 January 2012 HU ISSN 0374 0676 BAV-RESULTS OF OBSERVATIONS - PHOTOELECTRIC MINIMA OF
BARRED GALAXIES. I. A CATALOG
Published in "Astrophysics", Vol. 41, No. 1, pp. 1-13, 1998 BARRED GALAXIES. I. A CATALOG R. A. Kandalian and A. T. Kalloghlian Abstract. A catalog of barred spiral galaxies of types SB and SAB with B
CAN101 IP65 CAN LED 700mA. 1 LED 350mA. Beams: Colours: 82,50 CAN301 RGB 87,50 CAN301RGB 145,00 A R I101 IP40. C olou rs: Beams: G Green 42, 50
CATALOGO MINI SPOT ARIES Cod e: A R I101 1 LED 350mA IP 40 C olou rs: AL T Bea m s: 60 CEC III I E W W Warm White A R I101 42, 50 TAURUS Code: TAU101 1 LED 350mA AL T CE III 6 x 25 DIUSED TAU101 56,25
NE (SE) Beam
Predicted clear day beam and diffuse irradiances (/ W m 2 ) on vertical and horizontal surfaces on specified days in northern (N) and southern (S) hemispheres (see notes at foot of table): LATITUDE 60
Sunrise: 05:48 N (S) Beam
Predicted clear day beam and diffuse irradiances (/ W m 2 ) on vertical and horizontal surfaces on specified days in northern (N) and southern (S) hemispheres (see notes at foot of table): LATITUDE 40
Subaru Hyper Suprime Cam Survey of the Andromeda Halo
Subaru Hyper Suprime Cam Survey of the Andromeda Halo Masashi Chiba (Tohoku Univ.) Y. Komiyama, Mikito Tanaka, Masayuki Tanaka, R. Lupton, P. Guhathakurta, J. Kalirai, K. Gilbert, E. Kirby, M.-G. Lee,
DTS 3000 Cooling Units Watt
PRODUCTS COOLING UNITS DTS 3 Cooling Units 36 5795 att Door or ; in the event of limited space inside the cabinet; the routing of cold air to the important components in the cabinet is retained. Compact
Law 10/91 and DPR 412/93 require that the hot water temperature at the point of use is 48 C + 5 and require the insulation of all piping.
4.4 HEAT LOSS Law 10/91 and DPR 412/93 require that the hot water temperature at the point of use is 48 C + 5 and require the insulation of all piping. The thickness of the insulation layer depends on
SERVICE SHEET No. 515
SERVICE SHEET No. 515 MODEL D7 DISMANTLING AND REASSEMBLY OF HUBS AND BRAKES Both wheels are fitted with ball journal bearings which do not require adjustment. The bearings are packed with grease during
Hot Gas 1 30 min +47 F Add 3 thickness for a pair of ends.
CASE DATA AMPS Anti-Sweat 1.89 ECM Fan / # Fans 0.25/1 LED Lights 0.26 Drain Heater 0.25 3.05 All electrical data based on 115V and unlighted shelves. Add 0.97 amps per heated glass end panel. Electric
The Optical Gravitational Lensing Experiment. Catalog of Star Clusters from the Large Magellanic Cloud
ACTA ASTRONOMICA ol. (1999) pp. 1 2 The Optical Gravitational Lensing Experiment. Catalog of Star Clusters from the Large Magellanic Cloud by G. P i e t r z y ń s k i 1, A. U d a l s k i 1, M. K u b i
W (W) Beam
Predicted clear day beam and diffuse irradiances (/ W m 2 ) on vertical and horizontal surfaces on specified days in northern (N) and southern (S) hemispheres (see notes at foot of table): LATITUDE 0 N/S
MIRRORS. Mirror Assemblies. Mirror Heads. Spot Mirrors
MIRRORS Fig. 7 Fig. 9 1 3 Fig. 6 Fig. 8 0 2 4 Mirror Assemblies Part # Fig.# Mirror Size Description West Coast 603862 1 7 x 16 Retractable Stainless Steel Assembly Universal 604614 2 5 x 8 Custom Ford
Owners Manual. Table of Contents 3.1. INTRODUCTION AIRSPEEDS FOR EMERGENCY OPERATION OPERATIONAL CHECKLISTS 3
EMERGENCY PROCEDURES Table of Contents 3.1. INTRODUCTION 2 3.2. AIRSPEEDS FOR EMERGENCY OPERATION 2 3.3. OPERATIONAL CHECKLISTS 3 3.3.1. ENGINE FAILURES 3. ENGINE FAILURE DURING TAKEOFF RUN 3. ENGINE FAILURE
186A2 186A2DD N187-1 N187SD
Axle Kits For Paughco Springers 186A2 186A2DD Axle Kits For Paughco Wide Half-Round Springers These 3/4"-diameter axle kits are intended for use with Paughco s 181 Wide Springers (see pages 30 and ), and
UNIQUE SALE OF VERY LATE SHEETMETALand METALWORKING MACHINES
AUCTION CONDUCTED BY DUE TO THE REORGANIZATION OF UNIQUE SALE OF VERY LATE SHEETMETALand METALWORKING MACHINES Laser Cutting-, Punching-, Bending-, Shearing-, Stamping-, Welding-, Combined Header - & Machine
Light as emotion MACH 2
118 16 284 328 MACH 2 22 6 6 D1,5 D1,5 D1,5 Light as emotion The Mach 2 floodlight stands out for its versatile, cutting edge structure. It is addressed to a whole range of uses, especially for indoor
TECHNOLOGY MECHANISMS
TECHNOLOGY MECHANISMS 3º ESO IES CHAN DO MONTE URTAZA 1 WHAT IS A MECHANISM? Mechanism are devices that have been designed to make jobs easier. They all have certain things in common: They involve some
Product design: Mechanical systems
Changing force and movement Levers Levers can be used to: increase force and decrease speed or distance travelled, as in a crowbar or wheelbarrow; Linkage systems 3-bar linkages are rigid, but by making
Multiposition plate clamp. APPLICATIONS Lifting and revolving of plates, profiles, fabricated assemblies, steel frames...
Technical KS Multiposition plate clamp réf. : T 6012 GB révision: 9 date: 10/2016 APPLICATIONS Lifting and revolving of plates, profiles, fabricated assemblies, steel frames... DESCRIPTION Clamps fitted
Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels
ICE Workshop, STAR Global Conference 2012 March 19-21 2012, Amsterdam Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels Michael Heiss, Thomas Lauer Content Introduction
Channel Mount Generic Instructions (RDM01).
Important: Please read these instructions carefully prior to installation. Please refer to your fi tting instruction to ensure that the Roof Rack System is installed in the correct location. Check the
Cargo Securing Guidelines for Road Transport U.S. Steel Košice, s.r.o.
Cargo Securing Guidelines for Road Transport U.S. Steel Košice, s.r.o. Guidelines for loading staff and drivers Ing. Juraj Jagelčák, PhD. prof. Ing. Jozef Gnap, PhD. Department of Road and Urban Transport
MODEL 27106DT GILL PROPELLER ANEMOMETER JANUARY 2003 MANUAL PN 27106DT-90 R. M. YOUNG COMPANY
MODEL 27106DT GILL PROPELLER ANEMOMETER JANUARY 2003 MANUAL PN 27106DT-90 R. M. YOUNG COMPANY 2801 AERO PARK DRIVE, TRAVERSE CITY, MICHIGAN 49686, USA TEL: (231) 946-3980 FAX: (231) 946-4772 MODEL 27106DT
PL1 VALVE WITH UM ELECTRIC ACTUATOR
PL1 VALVE WITH UM ELECTRIC ACTUATOR FEATURES The PL1 butterfly-valves are wafer-style valves intended for current valve applications. This PN10 butterfly-valve of reinforced polypropylene is used to isolate
GROUND WATER PUMPAGE INVENTORY INDIAN SPRINGS VALLEY, NO
GROUND WATER PUMPAGE INVENTORY INDIAN SPRINGS VALLEY, NO 161 2008 INDIAN SPRINGS SEWAGE (Quasi-Municipal Town) 355 Ac-Ft INDIAN SPRINGS AIR FORCE BASE 64 Ac-Ft INDIAN SPRINGS VALLEY (PERMITS) 62 Ac-Ft
F532 DEHUMIDIFIER ASSEMBLY LGR145XLi
F532 DEHUMIDIFIER ASSEMBLY LGR145XLi BLOWER SHROUD ASSEMBLY DETAIL PART NO. QTY DESCRIPTION 02-01790 1 BLOWER ASSY MOTORIZED IMPELLER 115V 215W 225M 03-00013 4 WASHER 11/16 OD X 11/32 ID X.06 ZP 03-00030
BRAIDING TECHNOLOGY ℇ ℇ ℇ ³ ø Ø ³ ø Ø Wardwell spring combinations and tensions for 16 and 24 carrier wire braiders U = "speedmaster 150 and 100" L = for plain copper and coper coated wires uppercarrier
1. SAFETY PRECAUTION 2. SPECIFICATIONS
1. SAFETY PRECAUTION 2. SPECIFICATIONS THIS MANUAL CONTAINS IMPORTANT INFORMATION ON HOW TO USE THE VIBRATORY PLATE COMPACTOR, CC90 PROPERLY AND SAFELY. READ THROUGH THIS MANUAL BEFORE YOU ATTEMPT TO OPERATE
A Novel Device to Measure Instantaneous Swept Volume of Internal Combustion Engines
Global Journal of Researches in Engineering Vol. 10 Issue 7 (Ver1.0), December 2010 P a g e 47 A Novel Device to Measure Instantaneous Swept Volume of Internal Combustion Engines MURUGAN. R. GJRE -A Classification
DIY balancing. Tony Foale 2008
DIY balancing. Tony Foale 2008 I hope that the main articles on the theory behind engine balance have removed the mystic which often surrounds this subject. In fact there is no reason why anyone, with
UCDI274J - Technical Data Sheet
UCDI274J - Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
LED LINE SMD KIT GEN. 2
LED LINE SMD KIT GEN. 2 WU-M-480-G/-481-G WU-M-501-G/-502-G LED LINE SMD KIT GEN. 2 WU-M-480-G/-481-G and WU-M-501-G/-502-G Typical Applications Built-in luminaires/general illumination Office lighting
LVI634E - Technical Data Sheet
LVI634E - Technical Data Sheet LVI634E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
Spare part list DEPA Air Operated Diaphragm Pumps L
: DL25-80-SUV/UEV Drawing-No.: 1300-1014 25.01 Air valve, internal 25-40 All 1 2501053-- 50.01 Air valve, internal 50-80 All 1 5001052-- 25.01V Air valve, internal, nickel plated 25-40 All 1 250105399
(12) United States Patent
USOO9494.62OB2 (12) United States Patent Dames et al. (10) Patent No.: (45) Date of Patent: US 9.494,620 B2 Nov. 15, 2016 (54) FLEXIBLE CURRENT SENSOR ARRANGEMENT (71) Applicant: Sentec Ltd, Cambridge
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,
MacBook Unibody Model A1278 LVDS Display Cable Replacement
MacBook Unibody Model A1278 LVDS Display Cable Replacement Replace the LVDS display cable in your MacBook Unibody Model A1278. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 28 INTRODUCTION
To be taken together with Paper 1 in one session of 2 hours 45 minutes.
Centre Number Candidate Number Name UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education DESIGN AND TECHNOLOGY 0445/04 Paper 4 Technology May/June
MacBook Pro 13" Unibody Mid 2009 LCD Replacement
MacBook Pro 13" Unibody Mid 2009 LCD Replacement Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 25 INTRODUCTION Save money by replacing just the LCD rather than the whole display
PERMANENT MAGNET PUMPING SYSTEMS
PERMANENT MAGNET PUMPING SYSTEMS SECTION 5 Ver.01-2018 INTRODUCTION Magne c Pumping Solu ons offers the MAG LINE of Cables that is suitable for the installa on with ESP systems in oil, water and gas producing
04. Ignition and Exhaust system
New Polytechnic Kolhapur Page 1 of 10 04. Ignition and Exhaust system 4.1 Introduction to Ignition System 4 Marks Requirements of ignition system. Magneto and Battery Ignition systems (Working only). Firing
Atex Range Designed for used for oil gas, petrochemical, aviation, marine, mining and utility applications.
Atex Range Designed for used for oil gas, petrochemical, aviation, marine, mining and utility applications. Intrinsically Safe Explained Ha ardous Area Classification Zone 0, Zone, Zone This diagram shows
U:\0-PROJECT\Groton - sidewalk\main STREET\MAIN ST CONST-PLAN.dwg, 4/26/ :07:22 AM, AutoCAD PDF (General Documentation).pc3
' MIN 1.0% FROM STA 8+80 TO STA 9+0 STA 1+40 TO STA 11+00 STA 119+0 TO STA 10+4 CURB TYPE OVER H BINDER VARIED PROP.." H OVER 8" GRAVEL TYPE C 1:1. :1 PROP. GRANITE CURB TYPE VA, IN REVEAL OVER MIN. DEPTH
THE ENGINE & INTERIOR Constructing the floor panel of your Aston Martin DB5 model.
031-c 034-d 029-e THE PARTS YOU WILL NEED: READER-ASSEMBLED PARTS Driver s seat Driver s seat 032-a Monitor screen Weapons tray 032-b 034-c NUMBERED PARTS: 005-B : Control console 031-b 029-E : Gear stick
2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head
GENUINE MOTORCYCLE ACCESSORIES
GENUINE MOTORCYCLE ACCESSORIES PROTECTION LARGE ENGINE GUARD, BLACK Part No 1990427 Material Mild Steel Compatible Platform/s Continental GT and Interceptor Fitting Time 15 mins Engine protection guards
Driving in Hazardous Conditions. Created by Traffic Safety Branch, MCB Quantico, Va. Home to a region where weather is always a factor.
Driving in Hazardous Conditions Created by Traffic Safety Branch, MCB Quantico, Va. Home to a region where weather is always a factor. Overview Tips from our basic motor vehicle class Driving In Fog Driving
MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Data Cable Replacement
MacBook Pro 15" Unibody Late 2008 and Early 2009 Display Data Cable Replacement Replace the display data cable in you MacBook Pro 15" Unibody Late 2008 and Early 2009. Written By: Walter Galan ifixit CC
Compact And High-Performance Of 2-Phase Stepper Motor Driver. RUN current
-Phase Unipolar Stepper Motor Driver Compact nd High-Performance Of -Phase Stepper Motor Driver Features Unipolar constant current drive type Enable to brake when it stops by STOP current adjustment Low
series Linear guideways CG-serie 3.3 CG series
series CG-serie 3.3 CG series 3.3.1 Properties of the linear guideways, series CG The HIWIN linear guideways of the CG series with O-arrangement of the ball tracks guarantee high torque loading capacity,
ESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
Available in your favorite shop with MAG Connection
Available in your favorite shop with MAG Connection Mag Connection - Bat B2 Mercure, 32 avenue de l océanie ZI de Courtaboeuf - 91140 Villejust - France Phone: +33 820 820 111 - Fax : +33 142 011 200 -
METEOROLOGICAL INSTRUMENTS
METEOROLOGICAL INSTRUMENTS INSTRUCTIONS GILL PROPELLER ANEMOMETER MODEL 27106D R.M. YOUNG COMPANY 2801 AERO PARK DRIVE, TRAVERSE CITY, MICHIGAN 49686, USA TEL: (231) 946-3980 FAX: (231) 946-4772 WEB: www.youngusa.com
Shaft Grounding Ring Application Notes:
ing Ring Application Notes: Subject: Maximizing the effectiveness of conductive microfiber shaft grounding ring (AEGIS SGR ) on NEMA/IEC and above NEMA/IEC frame motors 1. Introduction Motors with variable
UCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCDI274J - Winding 311 Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
Project Title: Using Truck GPS Data for Freight Performance Analysis in the Twin Cities Metro Area Prepared by: Chen-Fu Liao (PI) Task Due: 9/30/2013
MnDOT Contract No. 998 Work Order No.47 213 Project Title: Using Truck GPS Data for Freight Performance Analysis in the Twin Cities Metro Area Prepared by: Chen-Fu Liao (PI) Task Due: 9/3/213 TASK #4:
LED light engine / OLED LED compact. Umodule EOS P214-4 umodule EOS
Umodule EOS P214-4 umodule EOS Product description General lighting Design and effect lighting Spotlights High-flux LED module Narrow colour temperature tolerance band Compact design Excellent thermal
(12) United States Patent
(12) United States Patent US009277323B2 (10) Patent No.: L0cke et al. (45) Date of Patent: Mar. 1, 2016 (54) COMPACT AUDIO SPEAKER (56) References Cited (71) Applicant: Apple Inc., Cupertino, CA (US) U.S.
Datasheet. Pitch Motor PMSM SP260B8
Pitch Motor PMSM SP260B8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260012a 1 Application The Pitch motor
ABI PRISM Linkage Mapping Set Version 2.5
ABI PRISM Linkage Mapping Set Version 2.5 Panel Guide ABI PRISM Linkage Mapping Set Version 2.5 Panel Guide DRAFT December 30, 2002 4:05 pm TitleV25.fm Copyright 2002, Applied Biosystems. All rights reserved.
Rotax Sprag Replacement
Rotax Sprag Replacement This is intended as a full walk through on a Sprag replacement on a Electric start Rotax engine These instructions were made from a sprag replacement on an MT 350 Tools List Non
MD2U Series 2-Phase Unipolar Stepper Motor Driver
MDU Series -Phase Unipolar Stepper Motor Driver Compact nd High-Performance Of -Phase Stepper Motor Driver Features Unipolar constant current drive type Enable to brake when it stops by STOP current adjustment
Datasheet. Pitch Motor PMSM SP190C8
Pitch Motor PMSM SP190C8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260007a 1 Application The Pitch motor
Rotary heat exchanger EURA, 20 53
Rotary heat exchanger EURA, 0 5 Fig. Adjustment At a constant speed, check that the rotor is rotating in the right direction. The direction of rotation is indicated on the casing. If the purging sector
Datasheet. Pitch Motor PMSM SP190F8
Pitch Motor PMSM SP190F8 Permanent Magnet Compact and light weight High peak torque Excellent efficiency Maintenance free, No fan 5 year warranty Document no.: 4121260009c 1 Application The Pitch motor
Stanley 3J 1 PowerStar Whites
Stanley 3J 1 PowerStar s ILS-SJ01-xx95-SC201-xx Series Product Overview At the heart of each PowerStar is a Stanley Electric 3J Series LED giving outstanding luminance with CRIs in excess of 95. All Stanley
Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips
Lineman s Hoists Cable Hoists Ratchet Lever Hoists Wire Grips Extra Measure of Reliability Fiberglass Handle and Polyester Webbing Provides added nonconductive material when using proper hot line handling
Ground bearing pressure. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A frame, boom foot (18 ft) and boom head
We Make Good Neighbors!
2 We Make Good Neighbors! 3 1 6 11 2 7 12 3 8 13 4 9 14 5 10 15 4 11 1/2 GAUGE x 2 3/8 MESH 3 High 50035 4 High 50045 5 High 50050 6 High 50055 9 GAUGE X 2 MESH Knuckle Twist 0.148 GAW - ASTM A 392, Class
Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens
Downlighting LyteCaster Project: Location: Cat.No: Type: Lamps: Notes: Qty: " round adjustable 800 Lumens Philips Lightolier LyteCaster LED adjustable features a.5" luminaire height that conserves plenum
BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron.
10+ SEER - AIR CONDITIONER
10+ SEER AIR CONDITIONER 1 1 / 2 THRU 5 TONS SPLIT SYSTEM FEATURES Service valves on all models with 3 1 / 2 stubs External refrigerant connections Copper tube / aluminum fin coil Prepainted condenser
EUROPEAN COMMISSION DG RTD. evader
EUROPEAN COMMISSION DG RTD SEVENTH FRAMEWORK PROGRAMME THEME 7 TRANSPORT - SST SST.2011.RTD-1 GA No. 285095 evader Electric Vehicle Alert for Detection and Emergency Response List of vehicles under study
Mini Contactors CI 4-
Data sheet Mini Contactors CI 4- Introduction CI 4 minicontactors cover the power range 1.5 to 5.9 kw and are available for a.c. and d.c. coil voltages. Characteristic of the minicontactors is that they
Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders
TECHNICAL Performance Testing of Composite Bearing Materials for Large Hydraulic Cylinders Leo Dupuis, Bosch-Rexroth Sr. Development Engineer Introduction Large hydraulic cylinders (LHCs) are integral
Group 19. Machines and Tools
Group Machines and Tools INDEX Page Contents 2 Index 3 Flare Fittings - Flaring Machines 4 Hand-operated s 4-5 Portable s 5-6 Small s 7-8 Large s 9 Accessories for s 10 Pressure Testing Benches 11-12 Cutting
Over 75 CNC machines in our manufacturing center.
TriTech Industries Inc. 610 Rahway Ave. Union, New Jersey 07083 USA 908-378-1080 Toll Free 866-387-4832 Fax 908-378-1659 on line at: www.tritechindustries.com email: support@tritechindustries.com TriTech
Stelron PS Indexer. PS Series Parallel Shaft Indexer
Stelron PS Indexer PS Series Parallel Shaft Indexer PS INTRODUCTION INTRODUCTION: The recent introduction of the PS series index drives confirms STELRON s continuing commitment to the design & manufacture
Downlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent round adjustable 800 Lumens
Downlighting LyteCaster Project: Location: Cat.No: Type: Lamps: Notes: Qty: " round adjustable 800 Lumens Philips Lightolier LyteCaster LED adjustable features a " luminaire height that conserves plenum
PS 53. POWER STEERING POWER STEERING LINK (for 4WD and Pre-Runner) REMOVAL
53 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 3. REMOVE FRONT WHEELS 4. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY NO. 1 5. REMOVE EXHAUST PIPE ASSEMBLY
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height... 7 Cover Disk... 9 Dirt Shield.... 9
Maintenance Bypass Switch
Part. LE09522AA-08/16-01 GF 3 109 53 Maintenance Bypass Switch Installation Manual 3 109 53 Maintenance Bypass Switch EN FR ENGLISH 3 2 3 109 53 Maintenance Bypass Switch Index 1 Introduction 4 1.1 Overview
ASM. Asynchronous Spindle. SEM Limited Faraday Way Orpington, Kent BR5 3QT United Kingdom
NE ASM Asynchronous Spindle Motors SEM Limited Faraday Way Orpington, Kent BR 3QT United Kingdom Tel: +44 ()1689 8847 Fax: +44 ()1689 884884 Email: sales@sem.co.uk Web: www.sem.co.uk Version 2.1 June 211
Handbook on Cots and Aprons Installation and Maintenance. Steps for mounting Cots COTS MOUNTING TYPE OF COT TO BE MOUNTED LIKE R/F OR LONG COTS
Handbook on Cots and Aprons Installation and Maintenance Steps for mounting Cots COTS PRE MOUNTING MOUNTING POST MOUNTING DE MOUNTING OF OLD COTS BARE SHELL PREPARATION CLEANING AND INSPECTION OF BARE
LINCOLN LAND COMMUNITY COLLEGE Springfield, Illinois Catalog
ACC 101 ATG 157 102 ATG 158 103 ATG 157 104 ATG 158 105 NT 108 NT 110 NT 201-202 NT ACT 100+104 CON 132 101-102 NT 103+201+202 CON 270 104+100 CON 132 107 NT 113 CON EC 120 CON EC 124 CON EC 134 CON EC
Wintex Winter storage and maintenance tips
Wintex Winter storage and maintenance tips Any equipment service manager will tell you that the best time to handle little issues with equipment is either right away or before we put it away in storage
Related vacuum products
Vacuum component C O N T E N T S variation 420 Position locking valve () 422 Compact vacuum regulator () 426 Vacuum break unit () 436 Vacuum filter large volume union type (VSFB) 440 Compact vacuum filter
P734H - Technical Data Sheet
P734H - Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the BS EN 60034 and the relevant section of other international standards such as BS5000,
KMH KMH500/630/800 HORIZONTAL MACHINING CENTERS
KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &
HCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
ELECTRO HYDRAULIC THRUSTERS
ELECTRO HYDRAULIC THRUSTERS THE ORIGINAL. BE SAE. TECHNICAL DATA.moving ahead. DESIGN, UNCTION AND ADVANTAGES PRESSURE STRAP PISTON ROD PROTECTIVE TUBE REDUNDANT DUST PROTECTION SEAL PISTON ROD OIL ILLER
Instruction for RBP250-3 and RBP300-3
Framo Anti-heeling Pump 1275-0029 -401 Rev.C Instruction for RBP250-3 and RBP300-3 2 of 13 CONTENTS Page 1 General description 2 1.1 Technical data 3 2 Operating information 3 2.1 Prior to initial start
Free-Standing Mathematics Qualification Advanced Level June Use black ink or black ball-point pen. Pencil should only be used for drawing.
Free-Standing Mathematics Qualification Advanced Level June 2015 Using and Applying 64/2 Decision Mathematics Unit 14 Tuesday 12 May 2015 1.30 pm to 3.00 pm For this paper you must have: a clean copy of
STATE OF MARYLAND BALTIMORE CENTRAL LIGHT RAIL LINE. To Evaluate Ride Quality for Higher Unbalance Speeds on Curves
STATE OF MARYLAND MASS TRANSIT ADMINISTRATION BALTIMORE CENTRAL LIGHT RAIL LINE TEST PROGRAM To Evaluate Ride Quality for Higher Unbalance Speeds on Curves Narayana Sundaram ENSCO, Inc. August 31, 2010
Notes: 2 3/8" 60mm. (1) One lamp with satin lens only (2) Not available for T8 Add 9 per lamp. Specify quantity Requires 120V or 277V
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 2 3/8" 60mm ORDERING CODE 9 3/4 248mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
Precision in Accuracy
Your addition in transmission. Precision in Accuracy MELIOR MOTION PRECISION GEARBOX PSH-D SPECIAL PRECISION GEARBOXES The Premium Group Premium Stephan Hameln, Germany Design, development and production
Configurable Components
Configurable Components Contents Building a FlexLink system...31 Modular conveyors introduction...33 Modular conveyors...34 Modular conveyors Configuration strings...35 X45 horizontal conveyor Configuration