MasterCool Refrigeration Side-by-Side Merging Combinations For SF Models

Transcription

1 MasterCool Refrigeration Side-by-Side Merging Combinations For SF Models KSK mieleusa.com

2 Side-by-Side Merging Kit KSK 1002 SPECIFICATIONS KSK 1002 Item USA Electrical 110V / 120V, 60Hz, 15 Amps Electrical Requirements - Volts/Amps In a side-by-side installations, a separate outlet must be used for each appliance. Power Cord NEMA 1-15 plug, 9 3 ft (2.8 m) Support Call Miele (800) Miele Website 8www.mieleusa.com 20/20 Link 82020technologies.com This merging kit should be used for side-by-side installation of the following models: - K 18x1 SF, K 19x1 SF, K 18x3 SF, K 19x3 SF - F 14x1 SF, F 18x1 SF, F 19x1 SF, F 14x3 SF, F 18x3 SF, F 19x3 SF - KF 18x1 SF, KF 19x1 SF, KF 18x3 SF, KF 19x3 SF - KWT 16x1 SF, KWT 16x3 SF For side-by-side installation of appliances with a stainless-steal front (SF), you also need a Top-frame. Please contact Miele to obtain a top-frame in the required width. The width of the Top-frame corresponds to the totale width of you side-by-side combination. Page 2 of 11

3 Side-by-Side Merging Kit KSK 1002 en en Side-by-side Side-by-side...without partition...without partition...with partition...with The...with minimum partition partition thickness ofthe partition is 5 / 8 "(16 mm). The minimum thickness ofthe partition is If 5 / there 8 "(16 is mm). apartition with athickness less from than 5 / 8 "(166 mm) 5 /16 (160 to6 5 mm) / 16 " (160 mm) If there between isathe partition adjacent withappliances, athicknessthen from each 5 / 8 appliance "(16 mm) should to6 5 be / 16 " individually (160 mm) between installedthe within adjacent its own appliances, niche using then the each mounting appliance accessories should beincluded. individually installed within its own niche using the mounting accessories included. In this case, you will only need the heating mat from the Merging kit to avoid condenstaion and prevent damages. If the appliances are installed directly next to each other (without a partition), If theyappliances need to beare attached installedtogether. directly A next heating to each mat other must(without also beainstalled. partition), This they willneed help to avoid be attached condensation together. and A heating prevent mat damages. must also be installed. This will help avoid condensation and prevent damages. HEATING MAT TRANSFORMER PLUG DETAILS FOR KSK 1002 In this case, you will only need the heating mat from the "Merging Kit" to Inavoid this case, condensation you will only andneed prevent the heating damages. mat from the "Merging Kit" to avoid condensation and prevent damages. 4 4 KSK foot- NEMA 1-15 molded plug power supply All Installations must be done in accordance with local codes Installation KSK1002 Merging with KSK kit 1002 must with be used a niche when depth combining under 25 (635 All Installations mm) will require must be the done location in accordance of the Electrical with local outlet(s) codes to Page 3 of 11

4 48 Side-by-Side Combination KFT1048SS top frame piece must be used when combining Page 4 of 11

5 48 Side-by-Side Combination KFT1048SS top frame piece must be used when combining Page 5 of 11

6 54 Side-by-Side Combination KFT1054SS top frame piece must be used when combining Page 6 of 11

7 54 Side-by-Side Combination KFT1054SS top frame piece must be used when combining Page 7 of 11

8 60 Side-by-Side Combination KFT1060SS top frame piece must be used when combining Page 8 of 11

9 60 Side-by-Side Combination KFT1060SS top frame piece must be used when combining Page 9 of 11

10 66 Side-by-Side Combination KFT1066SS top frame piece must be used when combining Page 10 of 11

11 72 Side-by-Side Combination KFT1072SS top frame piece must be used when combining Page 11 of 11