Price List. Tennsco, LLC P.O. Box 1888 Dickson, TN Phone: Fax:

Transcription

1 Price List Tennsco, LLC P.O. Box 1888 Dickson, TN Phone: Fax: August 2018

2 A Word About Tennsco Tennsco, LLC, headquartered in Dickson, Tennessee, began operations in Today, Tennsco is an industry leader in steel storage solutions, with over 1.6 million square feet of manufacturing and warehouse space in eight facilities. Tennsco offers a wide variety of storage and filing systems, steel office furniture, industrial and institutional shelving, lockers and shop equipment. Environmentally Friendly Products Tennsco steel products are certified SCS Indoor Advantage Gold for indoor air quality and low VOC emissions. Tennsco products allow our customers to apply LEED credits as described below: MR Credit 4.1 and Recycled Content MR Credit Manufactured Regionally MR Credit Extracted and Manufactured Regionally EQ Credit Low Emitting Materials, Paints Available Colors All Tennsco products are electrostatically painted with a tough, long lasting powder finish to ensure years of lasting beauty. Available standard colors vary by product line. All standard color options are listed at the bottom portion of each page, unless otherwise specified. Standard Colors are available at no additional charge. Premium and Special Matched Colors are available for an upcharge. Finishes shown are representative of the actual finishes. Please contact your local Tennsco dealer for more precise color swatches. Items with one of these symbols are part of Tennsco s quick ship program and select colors ship within 2-3 days. Quick ship is subject to maximum order quantities. Standard Colors (Unless Otherwise Specified) Champagne/ Putty (CPY) Quickship Legend - All 5 Standard Colors -, Grey & Black - Grey - Black - - & Grey - Black & - & Black (BLK) Unfinished Zinc Plated 2

3 Table of Contents COMMERCIAL Storage Cabinets Bookcases Card, Multimedia & Vertical Files Lateral Files Add-A-Stack Units & Accessories Literature Sorters, 30 Drawer Organizers, Fixed Shelf Lateral Files & Fixed Shelf Filing Units Imperial Shelving & Doors Regal, Capstone & Commercial Clip Shelving INDUSTRIAL Lockers Z-Line Boltless Shelving & Components Automotive Shelving Bulk Storage Q-Line Industrial Clip Shelving Slotted Angle & Packing Tables Workbenches Technical Workstations L&T SHELVING L&T Shelving Product dimensions listed throughout are nominal, actual dimensions may vary. For detailed specifications, contact Tennsco. Freight Classifications listed throughout this price list are subject to change. POLICY AND SERVICES PRICING: All prices are F.O.B. Tennsco, LLC s Facility in Dickson, Tennessee. All orders are subject to final acceptance at the Home Office, Dickson, Tennessee. Prices subject to change without notice. Tennsco has the right to make product design changes at any time. Tennsco s prices do not include sales, use, excise or similar taxes. Consequently, in addition to the prices specified herein, the amount of any present or future sales, use, excise or similar tax applicable to the manufacture, sale, purchase or use of the goods sold hereunder shall be paid by Buyer. In lieu thereof, Buyer shall provide Tennsco with a tax exemption certificate acceptable to the applicable taxing authorities. TERMS OF PAYMENT: Terms are Net 30 Days from date of shipment. A service charge of 1 1 /2% per month will be charged for overdue invoices. MINIMUM ORDERS: Minimum order is $ SPECIFICATIONS: Tennsco reserves the right to change any product specifications contained in this price list. FREIGHT CHARGES: All shipments will be made freight collect unless otherwise specified. If freight is paid by Tennsco, it will be added to the invoice or billed separately, depending on arrangements. On shipments by parcel post, the postage will be added to the invoice. All routing will be done solely by the Home Office. If purchaser does not accept delivery of merchandise when ready for shipment, storage fees will be charged to the purchaser. WEIGHT: Shipping weights shown are approximate. FREIGHT CLAIMS: Claims for shortages must be made in writing to the Home Office within 5 business days from receipt of shipment. Claims for damaged or lost material must be filed with the carrier. CAUTION: When you give delivering carrier a clear receipt for a shipment in which there is damaged merchandise or a shortage, the carrier is relieved of further responsibility. Claims for damage or shortage must be filed by you with the delivering carrier. Tennsco will not accept return of merchandise damaged in transit. Your claim is with the delivering carrier. CANCELLATIONS & RETURNS: No return merchandise will be accepted or approved, based on product, color and quantity, without written consent of the Tennsco General Office, Dickson, Tennessee. If return is approved, all returned shipments are subject to a handling charge of 25% plus all transportation charges incurred by Tennsco unless Tennsco is at fault. Orders for Special items are not subject to change, cancellation or return. Once production of Special items has begun, cancellation of order is subject to Tennsco approval. A 15% surcharge will be assessed to approved cancelled items. LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. Tennsco s warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Tennsco, where goods are damaged during shipment. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW: a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED. b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY TENNSCO OR REPLACEMENT OF THE GOODS AT TENNSCO S OPTION AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE. NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Tennsco shall have the right to inspect any goods claimed to be defective at Buyer s place of business or require Buyer to return the goods to Tennsco for inspection on Tennsco s premises. Transportation charges covering returned goods will be borne by Tennsco only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above. 3

4 STORAGE CABINETS JUMBO TRADITIONAL CABINETS J1878SU Solid Doors CVDJ2478SU Clear View Doors National Motor Freight Class: Welded 175, Unassembled 85 DELUXE TRADITIONAL CABINETS 7818 Solid Doors 7824RH Solid Doors with Recessed Handles National Motor Freight Class: Welded 175, Unassembled 85 Jumbo & Deluxe Traditional Cabinets Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS J1830SU $ J1842SU J1842A J2442SU J2442A J1878SU J1878A-N J2478SU J2478A-N C-THRU DOORS (Electronic Lock Not Available) CVDJ1842SU CVDJ1878SU , CVDJ1878A-N CVDJ2478SU , CVDJ2478A-N SLIDING DOORS (Optional Locks/Padlock Hasp Not Available) / JSD1878SU , / JSD2478SU , Accessories JSD1878SU Sliding Doors *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on welded units. For optional keyed alike lock ($18 List), add "KA" to catalog number. For installed padlock hasp ($6.30 List), add suffix "-HSP" to catalog number for welded units. Padlock hasp must be ordered separately for KD units. Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS DLX 90.0 $ $ DLX DLX SOLID DOORS WITH RECESSED HANDLES (Padlock Hasp Not Available) RH RH RH RH C-THRU DOORS (Electronic Lock Not Available) CVD CVD CVD CVD CVD CVD CVD7824 Clear View Doors Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $44.00 Full Width Shelf / CASTER KITS Fits 48"W x 24"D /16 1,000 CK PADLOCK HASPS Padlock Hasp PLA Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK PADLOCK HASPS Padlock Hasp PLA *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on welded units. For optional keyed alike lock ($18 List), add KA to catalog number. For installed padlock hasp ($6.30 List), add suffix "-HSP" to catalog number for welded units. Padlock hasp must be ordered separately for KD units. 4 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK) (BLK)

5 Standard & Open-Style Traditional Cabinets STANDARD TRADITIONAL CABINETS Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS $ $ DH DH DH DH SOLID DOORS WITH RECESSED HANDLES (Padlock Hasp Not Available) RH RH RH RH C-THRU DOORS (Electronic Lock Not Available) CVD CVD CVD CVD CVD CVD CVD CVD Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK PADLOCK HASPS Padlock Hasp PLA *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. CVD4218 Clear View Doors 7218 Solid Doors 7218RH Solid Doors with Recessed Handles National Motor Freight Class: Welded 175, Unassembled 85 STORAGE CABINETS Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE OPEN STYLE OS $ OS JO1842SU JO2442SU OS OS JO1878SU JO2478SU Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / Full Width Shelf / Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK Fits 48"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. Accessories OPEN-STYLE TRADITIONAL CABINETS OS4218 Open Style Counter Height JO1878SU Open Style Jumbo National Motor Freight Class: Welded 175, Unassembled 85 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK) (BLK) 5

6 STORAGE CABINETS JUMBO WARDROBE CABINETS Jumbo & Deluxe Wardrobe Cabinets Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS J1878SUW $ J1878A-N-W $ J2478SUW J2478A-N-W Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $44.00 Full Width Shelf / CASTER KITS Fits 48"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. For installed padlock hasp ($6.30 List), add suffix "-PLA" to catalog number for WSU units. Padlock hasp must be ordered separately for KD units. J1878SUW Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 DELUXE WARDROBE CABINETS Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS W $ $ W C-THRU DOORS (Electronic Lock Not Available) CVD7818W CVD CVD7824W CVD Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. For installed padlock hasp ($6.30 List), add suffix "-PLA" to catalog number for WSU units. Padlock hasp must be ordered separately for KD units. 7818W Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 6 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK)

7 Standard & Open-Style Wardrobe Cabinets STANDARD WARDROBE CABINETS Shelf # of WELDED UNASSEMBLED W D H Load Cap.* Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS $ $ C-THRU DOORS (Electronic Lock Not Available) CVD CVD Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. STORAGE CABINETS 7114 Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE OPEN STYLE OS $ OS JO1878SUW JO2478SUW Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / Full Width Shelf / Full Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK Fits 48"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. Accessories OPEN-STYLE WARDROBE CABINETS OS7124 Open Style National Motor Freight Class: Welded 175, Unassembled 85 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (CPY) (BLK) 7

8 STORAGE CABINETS Jumbo & Deluxe Combination Cabinets JUMBO COMBINATION CABINETS SHELF CAPACITY* # of WELDED UNASSEMBLED W D H Full Width Half Width Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS J1878SUC $ J1878C-N $ J2478SUC , J2478C-N Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $44.00 Full Width Shelf / Half Width Shelf /4 75 JPS Half Width Shelf /4 75 JPS CASTER KITS Fits 48 W x 24 D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. For installed padlock hasp ($6.30 List), add suffix "-PLA" to catalog number for WSU units. Padlock hasp must be ordered separately for KD units. J1878SUC Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 DELUXE COMBINATION CABINETS SHELF CAPACITY* # of WELDED UNASSEMBLED W D H Full Width Half Width Openings Cat. No. Wt. Price CAT. NO. WT. PRICE SOLID DOORS $ $ C-THRU DOORS (Electronic Lock Not Available) CVD CVD CVD CVD Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / Half Width Shelf / Half Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For optional security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. For installed padlock hasp ($6.30 List), add suffix "-PLA" to catalog number for WSU units. Padlock hasp must be ordered separately for KD units Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 8 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (CPY) (BLK)

9 Standard & Open-Style Combination Cabinets STANDARD COMBINATION CABINETS SHELF CAPACITY* # of WELDED UNASSEMBLED W D H Full Width Half Width Openings CAT. NO. WT. PRICE CAT. NO. WT. PRICE SOLID DOORS DH $ C-THRU DOORS (Electronic Lock Not Available) CVD CVD CVD Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / Half Width Shelf / Half Width Shelf / CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. For security lock ($40 List), add "HL" to catalog number. For optional electronic lock ($90 List), add "EL" to catalog number. Only available on WSU units. For optional keyed alike lock ($18 List), add KA to catalog number. STORAGE CABINETS 7220 Solid Doors National Motor Freight Class: Welded 175, Unassembled 85 SHELF CAPACITY* # of WELDED W D H Full Width Half Width Openings CAT. NO. WT. PRICE OPEN STYLE OS $ OS JO1878SUC JO2478SUC Accessories Description W D H Load Cap. CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / Half Width Shelf / Half Width Shelf / Full Width Shelf / Full Width Shelf / Half Width Shelf /4 75 JPS Half Width Shelf /4 75 JPS CASTER KITS Fits 36"W x 18"D /16 1,000 CK Fits 36"W x 24"D /16 1,000 CK Fits 48"W x 24"D /16 1,000 CK *Load Capacities are lbs. per shelf, evenly distributed. OPEN-STYLE COMBINATION CABINETS OS7220 Open Style National Motor Freight Class: Welded 175, Unassembled 85 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK) (BLK) 9

10 STORAGE CABINETS JANITORIAL CABINET Specialty Cabinets Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE JAN6618DH 99.0 $ *Load Capacities are lbs. per shelf, evenly distributed. For optional electronic lock ($90 List), add "EL" to catalog number. For installed padlock hasp ($6.30 List), add suffix -PLA to catalog number for WSU units. Padlock hasp must be ordered separately for KD units. National Motor Freight Class: 175 STORAGE CABINET/BOOKCASE COMBINATION Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE BCD $ EXTRA SHELF / *Load Capacities are lbs. per shelf, evenly distributed. National Motor Freight Class: 175 STORAGE CABINET WITH FILE DRAWERS Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE WITH ONE BOTTOM FILE DRAWER DWR $ DWR WITH TWO BOTTOM FILE DRAWERS DWR , Accessories** Description W D H CAT. NO. WT. PRICE Cross Rods (Pair) 15 3 /4 1 7 /16 7 /8 15CR 1.0 $9.30 *Load Capacities are lbs. per shelf, evenly distributed. **Cross Rods only available in Black. Load capacities up to 120 lbs. per drawer. All units are setup. Lateral drawers ship standard with file rods for side-to-side filing applications. For front-to-back filing, drawers will accommodate two rows of letter-sized or legal-sized files. This requires one pair of cross rods (15CR) per drawer. Same key opens both the cabinet lock and the drawer lock. Can not be used with caster kits. National Motor Freight Class: Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK) (BLK)

11 Specialty Cabinets MOBILE TRADITIONAL CABINETS STORAGE CABINETS # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE / CK $ / CK / CK / CK / CK / CK *Load Capacities are lbs. per shelf, evenly distributed. Accessories Description W D H Load Cap.* CAT. NO. WT. PRICE EXTRA SHELVES Full Width Shelf / $28.00 Full Width Shelf / National Motor Freight Class: 175 LAPTOP/TABLET CHARGING STATIONS # of WELDED W D H Mobile? Openings CAT. NO. WT. PRICE 42 HIGH CABINET WITH 16 CHARGING STATIONS No CMP 97.0 $1, /4 Yes CMPM , HIGH CABINET WITH 32 CHARGING STATIONS No CMP , /4 Yes CMPM , Power outlets must only be used for charging low-amperage devices (such as laptop computers, notebooks, tablets, etc.) to prevent power overload. Maximum amp load Is 15 amps per 16-outlet strip. Welded, set-up units. 72" high units include a center pull-out reference shelf. Mobile units include two swivel and two fixed casters CMP National Motor Freight Class: CMPM CABINETS WITH PERFORATED DOORS Shelf # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE STANDARD CABINETS WITH PERFORATED DOORS PD $ PD JUMBO CABINETS WITH PERFORATED DOORS J1878SU-PD J2478SU-PD , *Load Capacities are lbs. per shelf, evenly distributed. National Motor Freight Class: 175 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (CPY) (BLK) 11

12 STORAGE CABINETS CANTILEVERED BIN STORAGE CABINETS Specialty Cabinets WELDED Bin Rails W D H Included CAT. NO. WT. PRICE BC $ BC Accessories Description W D H CAT. NO. WT. PRICE Additional Bin Rails 36 3 /4 1 1 /2 CBR Storage bins are not included and are not sold by Tennsco. Bins may be up to 15" deep in 18"d cabinets, and up to 18" deep in 24"d cabinets. Bin loaded weights must not exceed 30 lbs per rail. National Motor Freight Class: 175 TA-50 MILITARY CABINET W D H Load Cap.* Openings CAT. NO. WT. PRICE TA-50 Cabinet With Standard Handle TA $1, TA-50 Cabinet With Heavy-Duty Handle TA-50HH , Extra Shelf / TA-50ES *Load Capacities are lbs. per shelf, evenly distributed. # of WELDED National Motor Freight Class: 175 SINGLE DOOR CABINET # of WELDED W D H Load Cap.* Openings CAT. NO. WT. PRICE Single Door Cabinet $ Extra Shelf / *Load Capacities are lbs. per shelf, evenly distributed. National Motor Freight Class: Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are

13 Welded Bookcases WELDED BOOKCASES /2 DEEP CAT. NO. NO. OF OPENINGS W D H WT. PRICE 34 1 /2" Wide Bookcases B / / $ B / / B / / B / / B / / Extra Shelf for 34 1 /2" Wide B / / Wide Bookcases BC / BC / BC / BC / BC / Extra Shelf for 30 Wide BC /2 3 / Narrow profile is ideal for books and standard sized binders. Available in 34 1/2" and 30" widths Shelf capacities up to 130 lbs. per shelf, evenly distributed National Motor Freight Class: 175 BOOKCASES WELDED BOOKCASES DEEP CAT. NO. NO. OF OPENINGS W D H WT. PRICE 18 Deep Bookcases BC $ BC BC BC BC Extra Shelf / Deep Mobile Bookcases BC18-30M / BC18-42M / BC18-52M / BC18-72M / Laminate Top* LT / *Laminate Top available in Sable Oak finish. CAT. NO. NO. OF SHELVES W D H WT. PRICE With Glass Doors (Lock Included) 330GL $ GL GL Without Glass Doors Glass Door Kits (Lock Included) 330GDK GDK GDK Extra Shelves* GBS / *Packed 2 per carton, priced per each. Mobile Bookcase Great for storing items with a larger profile; also has a raised base and can be fitted with casters for mobility. Shelf capacities up to 150 lbs. per shelf, evenly distributed National Motor Freight Class: 175 EXECUTIVE BOOKCASES Shelf capacities up to 150 lbs. per shelf, evenly distributed. National Motor Freight Class: Welded Bookcases with or without doors: 175 Glass doors only: 77.5 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (BLK) (CPY) (BLK) 13

14 Unassembled Bookcases UNASSEMBLED BOOKCASES BOOKCASES B "H Bookcase B "H Bookcase B "H Bookcase CAT. NO. NO. OF OPENINGS END PANELS W D H WT. PRICE B H Bookcases 2 YES $ B NO B-12 Extra Shelf / B-1 Shelf Divider CAT. NO. NO. OF OPENINGS END PANELS W D H WT. PRICE B H Bookcases 3 YES $ B NO B-12 Extra Shelf / B-1 Shelf Divider CAT. NO. NO. OF OPENINGS END PANELS W D H WT. PRICE B H Bookcases 5 YES $ B NO B-12 Extra Shelf / B-1 Shelf Divider CAT. NO. NO. OF OPENINGS END PANELS W D H WT. PRICE B H Bookcases 7 YES $ B NO B-12 Extra Shelf / B-1 Shelf Divider All units have backs. All units come standard with one divider per opening. End panels are required only at ends of row. Order one unit with end panels, then add-on units without end panels. Shelf capacities up to 200 lbs. per shelf, evenly distributed. National Motor Freight Class: 85 B "H Bookcase BOOK SUPPORTS BSN6 BSN9 BSN6 4 1 /2 1 3 / $6.80 BSN9 4 1 /2 1 3 / Sold individually, not as pairs. National Motor Freight Class: Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (BLK)

15 Card, Multimedia & Vertical Files CARD & MULTIMEDIA FILES CAT. NO. NO. OF DRAWERS W D H WT. PRICE Card Files CF / $1, CF / , CF / , CF / , CF / , Extra Center Partition CF-DIV (Available in Black Only) Extra Follower Block CF-BLK1 (For all sizes except CF-669) CF-BLK2 (For CF-669 only) CF-846 CF-758 Card files come standard with one center partition and two follower blocks. Units come standard with four levelers for uneven floors. FILING SYSTEMS STORAGE CAPACITIES FOR VARIOUS MEDIA CAT. NO. CARDS CDs CDs DVD/Blu-Rays (Sizes) (Cap.) (Standard) (Slimline) (Movie Case) CF-558 5x8 27, * CF-669 6x9 32, ** CF-646 3x5; 4x6 32, CF-758 5x8 38, * 1680* 588 CF-846 3x5; 4x6 43, CF-669 CF-646 CF-558 *Removing center partition increases this number by 1/3. **DVD/Blu-Rays fit securely when a second center partition (CF-DIV) is inserted. National Motor Freight Class: 175 Product Specifications Full suspension drawers feature three-member, ball-bearing suspensions. Mechanical inner lock allows only one drawer to be open at a time to prevent tipping. Four adjustable steel leveling glides. No hanging folder rods required. One label holder per drawer. Steel follower block in all drawers slide in a recessed metal track. VERTICAL FILES Lock Specifications One key unlocks all drawers at once. Locks are core-removable. Locks are keyed randomly. For keyed alike, add suffix "-KA" to model number. Lateral Files, Vertical Files, and Card Files can be keyed alike if desired. CAT. NO. DESCRIPTION W D H WT. PRICE Two Drawer Vertical Files V282-MF Letter Size, 2 Drawer / / $ V282C-MF Legal Size, 2 Drawer / / Three Drawer Vertical Files V283-MF Letter Size, 3 Drawer / / V283C-MF Legal Size, 3 Drawer / / Four Drawer Vertical Files V284-MF Letter Size, 4 Drawer / / V284C-MF Legal Size, 4 Drawer / / Five Drawer Vertical Files V285-MF Letter Size, 5 Drawer / / , V285C-MF Legal Size, 5 Drawer / / , National Motor Freight Class: 175 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (CPY) (BLK) 15

16 Lateral Files Product Specifications Full suspension drawers feature threemember, steel ball-bearing suspensions with a limited lifetime warranty. Standard dual-point gang lock with safety interlock system. One label holder per drawer. Four adjustable steel leveling glides. All drawers and shelves equipped with standard hanging folder rods for side-to-side letter or legal filing. For filing front-to-back, order cross rods (15CR). FILING SYSTEMS TWO DRAWER LATERAL FILES National Motor Freight Class: 150 CAT. NO. DESCRIPTION W D H WT. PRICE LPL3024L20 30" File, Fixed Drawer Fronts / / $ LPL3024L21 30" File, Retractable Doors / / LPL3624L20 36" File, Fixed Drawer Fronts / / LPL3624L21 36" File, Retractable Doors / / LPL4224L20 42" File, Fixed Drawer Fronts / / LPL4224L21 42" File, Retractable Doors / / NOTE: Tennsco recommends the use of a counterweight (to counterbalance the weight of an open drawer) in all free-standing two-drawer files. To order a counterweight on any lateral file, add a "W" to the model number. Example: LPL3024L20W. Price listed on page 17. THREE DRAWER LATERAL FILES National Motor Freight Class: 150 CAT. NO. DESCRIPTION W D H WT. PRICE LPL3036L30 30" File, Fixed Drawer Fronts / / $ LPL3036L31 30" File, Retractable Doors / / , LPL3636L30 36" File, Fixed Drawer Fronts / / LPL3636L31 36" File, Retractable Doors / / , LPL4236L30 42" File, Fixed Drawer Fronts / / , LPL4236L31 42" File, Retractable Doors / / , FOUR DRAWER LATERAL FILES National Motor Freight Class: 150 CAT. NO. DESCRIPTION W D H WT. PRICE LPL3048L40 30" File, Fixed Drawer Fronts / / $1, LPL3048L41 30" File, Retractable Doors / / , LPL3648L40 36" File, Fixed Drawer Fronts / / , LPL3648L41 36" File, Retractable Doors / / , LPL4248L40 42" File, Fixed Drawer Fronts / / , LPL4248L41 42" File, Retractable Doors / / , FIVE DRAWER LATERAL FILES CAT. NO. DESCRIPTION W D H WT. PRICE LPL3060L50 30" File, Combination Unit* / $1, LPL3060L51 30" File, Retractable Doors / , LPL3660L50 36" File, Combination Unit* / , LPL3660L51 36" File, Retractable Doors / , LPL4260L50 42" File, Combination Unit* / , LPL4260L51 42" File, Retractable Doors / , * Top openings is a retractable roll-out drawer; four bottom openings are solid-front doors. For optional Posting Shelf, located 36" from the floor, add a "P" to the end of the model number and add $85 to the list price. Example: L4260L50P. National Motor Freight Class: Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are (BLK)

17 Lateral Files, Overfiles & Accessories Inside Drawer Dimensions File Width Depth Height 12"high drawer 30" 27 1 /4" 15 7 /16" 10 7 /16" with retractable 36" 33 1 /4" 15 7 /16" 10 7 /16" door 42" 39 1 /4" 15 7 /16" 10 7 /16" 12" high drawer with 30" 27 1 /4" 15 7 /16" 11 1 /8" fixed front 36" 33 1 /4" 15 7 /16" 11 1 /8" 42" 39 1 /4" 15 7 /16" 11 1 /8" Locks One key unlocks all drawers at once. Locks are core-removable. Locks are keyed randomly. For keyed alike, add suffix "-KA" to model number. Lateral Files, Vertical Files, and Card Files can be keyed alike if desired. Installation guidelines Installation and safety instructions are located in top drawer of all lateral files. Counterweights: To order a factory installed counterweight on any lateral file, add a "W" to the model number. Refer to "Counterweights" chart on p.17 for added cost. SIX DRAWER LATERAL FILES CAT. NO. DESCRIPTION W D H WT. PRICE LPL3672L60 36" File, Combination Units* / / $1, LPL3672L61 36" File, Retractable Doors / / , LPL4272L60 42" File, Combination Units* / / , LPL4272L61 42" File, Retractable Doors / / , *Top two openings are retractable roll-out drawers; four bottom openings are solid-front doors. FILING SYSTEMS National Motor Freight Class: 150 OVERFILES Double Level L302OF / $ L362OF / L422OF / Can be attached to top of lateral files. T / $ T / T / For 2-Drawer Files T30CW / / $89.00 T36CW / / T42CW / / For 3, 4 and 5-Drawer Files T30CW / / T36CW / / T42CW / / AA $18.70 AA AA CR Cross Rods (pair) 15 3 /4 1 7 /8 7 /8 1.0 $9.30 5AD Dividers 13 1 /2 6 3 / Standard Colors (Unless Otherwise Specified) Champagne/ Putty (CPY) Black (BLK) Items with these symbols are When ordering laminate tops, specify Oak (L006), Mahogany (L005) or Titanium (TTM). Used to counterbalance the weight of an open drawer. Attaches to bottom rear of cabinet. Recommended for use with all free standing two-drawer files. May be pre-installed at factory. Available in black only. Fits on bottom of drawer to help align letter filing folders. Prevents legal sized-filing. L362OF National Motor Freight Class: 150 LAMINATE TOPS COUNTERWEIGHTS SHELF MODIFIERS (For Letter Depth Filing) Available in black only. CROSS RODS & DIVIDERS Cross rods are used in conjunction Cross Rod with hanging folder rods to file front-to-back. Dividers are used to Divider separate file folders when hanging folder rods are not used. Available in black only. (L006) (BLK) (L005) (TTM) 17

18 Add-A-Stack Units & Accessories ADD-A-STACK UNITS FILING SYSTEMS Stackable tier with 4 fixed dividers INSIDE OVERALL CAT. NO. DESCRIPTION W D H W D H WT. PRICE Letter Size Stackable Tiers AS36L With 4 fixed dividers / / $ AS48L With 6 fixed dividers / / Legal Size Stackable Tiers AS36G With 4 fixed dividers / / AS48G With 6 fixed dividers / / BASE SIZE TOP SIZE CAT. NO. DESCRIPTION W D H W D H WT. PRICE Letter Size Base & Top Sets AS36LBT 36"w, no levelers / / $ AS36LBT-L 36"w, with levelers / / AS48LBT 48"w, no levelers / / AS48LBT-L 48"w, with levelers / / Legal Size Base & Top Sets AS36GBT 36"w, no levelers / / AS36GBT-L 36"w, with levelers / / AS48GBT 48"w, no levelers / / AS48GBT-L 48"w, with levelers / / National Motor Freight Class: Stackable Tiers: 100; Base & Top Sets: 70 Base & top with levelers LITERATURE SORTERS Tier With Four Literature Sorter Units AS36GB 3-Divider Tier, Legal Size INSIDE OVERALL CAT. NO. DESCRIPTION W D H W D H WT. PRICE Literature Sorters ASLT1 Letter Bin (Single Unit) 8 1 / /8 9 5 /8 8 5 / /4 9 3 /4 5.0 $49.00 ASLT4 Letter Bin (Four Units) 8 1 / /8 9 5 / /4 9 3 / Special 3-Divider Tier To Fit Literature Sorters AS36LB With 3 Fixed Dividers / / Literature Sorters ASLG1 Legal Bin (Single Unit) 8 1 / /8 9 5 /8 8 5 / /4 9 3 / ASLG4 Legal Bin (Four Units) 8 1 / /8 9 5 / /4 9 3 / Special 3-Divider Tier To Fit Literature Sorters AS36GB With 3 Fixed Dividers / / Literature sorters require a special tier with three dividers (AS36LB) to allow room for sorter bins. Literature sorters are sold as single units (three trays) or a pack of four units (twelve trays). National Motor Freight Class: 100 POSTING SHELF/DOOR, LOCKING DOOR Posting Shelf Locking Door CAT. NO. DESCRIPTION W D H WT. PRICE Posting Shelf/Door AS36PS 36"w Posting Shelf/Door / $ AS48PS 48"w Posting Shelf/Door / Locking Door* AS36LD 36"w Locking Door / AS48LD 48"w Locking Door / *Door with lock will not work as a posting shelf due to the lock mechanism. Fits letter or legal tiers. Not to be used with end tab file folders. Standard Colors 18 Champagne/ Putty (CPY) Black (BLK)

19 Literature Sorters, Fixed Shelf Lateral Files LITERATURE SORTERS Letter Size / / $ Extra Tray (Pack of 5) Legal Size / / Extra Tray (Pack of 5) Comes standard with 18 trays (to make 21 openings). Trays are adjustable on 1-1/2" centers. Same-depth units can be double-stacked. National Motor Freight Class: 100 Letter Size (4075) Legal Size (5075) Drawer with Optional Divider THIRTY DRAWER ORGANIZERS FILING SYSTEMS Letter Size / / $ Legal Size / / Optional Dividers (Pack of 30)* 30AD 9 1 / / *Dividers available in Black only. Inside Drawer Dimensions (WxDxH): Letter Size: 9 x 11¼ x 2 ¾ Legal Size: 9 x 14¼ x 2¾ CAT. NO. NO. OF OPENINGS W D H WT. PRICE Open Units FS / $ FS / FS , Closed Units FS351L / , FS361L / , FS371L , Extra Divider FD Comes standard with four steel dividers per shelf level; dividers match cabinet color. Equipped with shelf-modifier rod to accommodate both letter and legal filing. All closed units have doors with long-pull handles and single lock secures all doors. Letter Size (2085) Legal Size (3085) Same-depth units can be double-stacked. National Motor Freight Class: 100 FIXED SHELF LATERAL FILES National Motor Freight Class: 100 CAT. NO. NO. OF OPENINGS W D H WT. PRICE Open Units FSF / / $ Optional Posting Shelf FSFRS / Extra Divider PD Closed Unit Open Unit FIXED SHELF FILE Comes standard with four plastic dividers per shelf level. National Motor Freight Class: 85 Optional Posting Shelf Standard Colors (Unless Otherwise Specified) Champagne/ Putty (CPY) Black (BLK) Items with these symbols are (CPY) (BLK) (BLK) (BLK) 19

20 Imperial Shelving OFFICE SHELVING IMPERIAL SHELVING Single Entry Unit, 88" Tall Double Entry Unit, 88" Tall Single Entry Unit, 76" Tall Double Entry Unit, 76" Tall Double entry units shipped in two cartons. All units have closed upright panels. Plastic feet included to protect carpet. No special tools required for assembly. Single entry units include 5 dividers and one backstop per level Double entry units include 10 dividers and one center stop per level CAT. NO. NO. OF OPENINGS W D H WT. PRICE Single Entry Units Starter Units 1276PC $ PC PC PC PC PC Adder Units 1276AC AC AC AC AC AC Double Entry Units Starter Units 2476PC PC PC PC PC , PC Adder Units 2476AC AC AC AC AC AC Reference Shelf RSMB / RSMB / RSMB / RSMB / Extra Shelf Kit ISK ISK ISK ISK ISK ISK DOORS FOR IMPERIAL SHELVING Hinged Door (adds 2 3/4" to outside depth of unit, including handles; frame uses 1 /2" vertical filing space) Hinged Doors With Extended Frames LTHD-3676RHD / $ LTHD-4876RHD / LTHD-3688RHD / LTHD-4888RHD / Two Piece Back (to enclose units with doors) LTBP LTBP LTBP LTBP All doors come standard with lock, in compliance with Health Insurance Portability and Accountability Act of 1996 (HIPAA) regulations. 20 Standard Color Items with this symbol are

21 Regal, Capstone & Commercial Clip Shelving REGAL SHELVING CAT. NO. NO. OF OPENINGS W D H WT. PRICE Starter Units RGL-1236S $ RGL-1536S RGL-1836S Adder Units RGL-1236A RGL-1536A RGL-1836A CAT. NO. NO. OF OPENINGS W D H WT. PRICE Starter Units CS MGY $ CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY CS MGY Adder Units CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CA MGY CAT. NO. NO. OF OPENINGS W D H WT. PRICE Open-Style Shelving Units ESP $ ESP ESP ESP ESP ESP Closed-Style Shelving Units ESPC ESPC ESPC ESPC ESPC ESPC Extra Shelves* ES ES ES *Packaged 2 shelves per carton; priced per shelf. Color: only with Oak woodgrain particleboard shelf. Completely boltless assembly; only rubber mallet needed for assembly. Shelf capacities up to 600 lbs. Plastic feet included to protect carpets. Color: Grey only. Individually cartoned. Shelf capacities up to 250 lbs. National Motor Freight classification: Class 70 CAPSTONE SHELVING Extra Shelves CESL-3618-MGY / $50.00 CESL-3624-MGY / CESL-4218-MGY / CESL-4224-MGY / CESL-4818-MGY / CESL-4824-MGY / Color: Grey only. Shelf capacities up to 650 lbs. COMMERCIAL CLIP SHELVING PACKAGE Open-Style Closed-Style OFFICE SHELVING Standard Colors (Unless Otherwise Specified) Items with these symbols are 21

22 STS STS Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 Single Tier Lockers Welded frames are riveted to welded locker body. SINGLE TIER LOCKERS WITH LEGS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H STS $ STK $ STS STK STS STK STS STK STS STK STS STK STS STS STS STS , STS STK STS STK STS STK STS STK STS STK STS , STK STS STK STS , STK STS STK STS , STK STS STK STS , STK , STS STS STK STS , STK , STS SINGLE TIER LOCKERS WITHOUT LEGS LOCKERS STS C STS A Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H STS A 50 $ STK A 49 $ STS C STK C STS A STK A STS C STK C STS A STK A STS C STK C STS A STK A STS C STS A STK A STS C STK C STS A STS A STK A STS C STK C STS A STK A STS C STK C STS A STK A STS C STK C STS A STS C 182 1, STS A STK A STS C 191 1, STK C STS A STK A STS C 202 1, STK C 199 1, STS A STK A STS B STK C 272 1, STS A Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are

23 Double Tier Lockers Welded frames are riveted to welded locker body. DOUBLE TIER LOCKERS WITH LEGS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H DTS $ DTK $ DTS DTK DTS DTK DTS , DTK DTS DTK DTS , DTK DTS DTK DTS , DTK , DTS DTK DTS , DTK , DTS DTK DTS , DTK DTS DTK DTS , DTK DTS DTK DTS , DTK DTS DTK DTS , DTK , DTS DTK DTS , DTK , DTS DTS Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 DOUBLE TIER LOCKERS WITHOUT LEGS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H DTS A 48 $ DTK A 47 $ DTS C DTK C DTS A DTK A DTS C DTK C DTS A DTK A DTS C 145 1, DTK C DTS A DTS C 155 1, DTK C DTS A DTK A DTS C 167 1, DTK C DTS A DTK A DTS C 153 1, DTK C DTS A DTK A DTS C 160 1, DTK C DTS A DTK A DTS C 171 1, DTK C DTS A DTK A DTS C 183 1, DTK C DTS A DTK A DTS C 193 1, DTK C 189 1, DTS C DTS A Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 LOCKERS Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are 23

24 Triple Tier Lockers Welded frames are riveted to welded locker body. TRIPLE TIER LOCKERS WITH LEGS TTS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H TTS $ TTK $ TTS , TTK , TTS TTK TTS , TTK , TTS TTK TTS , TTK , TTS TTK TTS , TTK , TTS TTK TTS , TTK , TTS Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 TRIPLE TIER LOCKERS WITHOUT LEGS LOCKERS TTS C WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H TTS A 63 $ TTK A 62 $ TTS C 159 1, TTK C 156 1, TTS A TTK A TTS C 166 1, TTK C 163 1, TTS A TTK A TTS C 179 1, TTK C 175 1, TTS A TTK A TTS C 168 1, TTK C 164 1, TTS A TTK A TTS C 180 1, TTK C 177 1, TTS A Other sizes available. Call factory for prices and delivery. National Motor Freight Class: Welded, 175; Unassembled, 85 Standard Colors 24 Champagne/ Putty (CPY) Black (BLK)

25 Box Lockers Welded frames are riveted to welded locker body. 5-TIER BOX LOCKERS WITH LEGS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H BS $ BK $ BS BK BS BK BS BK BS BK BS BK BS BK BS , BK BS BK BS , BK National Motor Freight Class: Welded, 175; Unassembled, 85. Other sizes available. Call factory for pricing. BS BS TIER BOX LOCKERS WITHOUT LEGS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H BS A 50 $ BK A 49 $ BS C BK C BS A BK A BS C BK C BS A BK A BS C BK C BS A BK A BS C 156 1, BK C BS A BK A BS C 162 1, BK C National Motor Freight Class: Welded, 175; Unassembled, 85. Other sizes available. Call factory for pricing. BS C BS A WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H BS $ BK $ BS , BK BS BK BS , BK BS BK BS , BK BS BK BS , BK , BS BK BS , BK , National Motor Freight Class: Welded, 175; Unassembled, 85. Other sizes available. Call factory for pricing. 6-TIER BOX LOCKERS WITH LEGS BS BS LOCKERS WELDED UNASSEMBLED DIMENSIONS CATALOG UNIT UNIT CATALOG UNIT UNIT OPEN- OPENING OVERALL UNIT NUMBER WEIGHT PRICE NUMBER WEIGHT PRICE INGS W D H W D H BS A 59 $ BK A 58 $ BS C 149 1, BK C BS A BK A BS C 161 1, BK C BS A BK A BS C 175 1, BK C BS A BK A BS C 185 1, BK C 182 1, BS A BK A BS C 198 1, BK C 194 1, National Motor Freight Class: Welded, 175; Unassembled, 85. Other sizes available. Call factory for pricing. 6-TIER BOX LOCKERS WITHOUT LEGS BS C BS A Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are 25

26 Heavy-Duty Lockers Welded frames are riveted to welded locker body. WELDED HEAVY-DUTY SINGLE TIER LOCKERS HSL C HSL Locker body and shelf constructed of 16 gauge steel. Shipped assembled. National Motor Freight Class: 175 CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS HSL $ HSL , HSL HSL , HSL HSL , WITHOUT LEGS HSL A HSL C , HSL A HSL C , HSL A HSL B , WELDED HEAVY-DUTY DOUBLE TIER LOCKERS LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS HDL $ HDL , HDL HDL , WITHOUT LEGS HDL A HDL C , HDL A HDL C , HDL HDL A Locker body and shelf constructed of 16 gauge steel. Shipped assembled. National Motor Freight Class: 175 WELDED HEAVY-DUTY 6-TIER BOX LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS HBL $ HBL , WITHOUT LEGS HBL A HBL C , HBL C HBL A Locker body and shelf constructed of 16 gauge steel. Shipped assembled. National Motor Freight Class: 175 Standard Colors 26 Champagne/ Putty (CPY) Black (BLK)

27 Specialty Lockers Welded frames are riveted to welded locker body. WELDED COMBINATION LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS CMS $ CMS WITHOUT LEGS CMS A CMS A Shipped assembled. National Motor Freight Class: 175 CMS A WELDED HALF-HEIGHT LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS STS $ STS WITHOUT LEGS STS A STS A Shipped assembled. National Motor Freight Class: 175 STS A WELDED WALL MOUNTED LOCKERS LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE BS * 3-PERSON LOCKER $ BS * 4-PERSON LOCKER *Wall mounted lockers are shipped assembled only. Coat rods are installed in field. Coat rod and brackets included with all 3-person and 4-person lockers. National Motor Freight Class: 175 BS BS WELDED WALL MOUNTED C-THRU LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE 4-PERSON LOCKER CBS * $ *Shipped assembled. Coat rod and brackets included. Coat rods are installed in field. National Motor Freight Class: 175 CBS Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are 27

28 15 PERSON LOCKERS 15 & 16 Person Lockers Welded frames are riveted to welded locker body. CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WELDED WITH LEGS SRS * $1, UNASSEMBLED WITH LEGS SRK , WELDED WITHOUT LEGS SRS A* , UNASSEMBLED WITHOUT LEGS SRK A , SRS *Shipped assembled. Coat rod and brackets included. Center section and coat rods are installed in field. National Motor Freight Class: Assembled, 175; Unassembled, PERSON LOCKERS LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE SRS * WELDED WITH LEGS $1, SRK UNASSEMBLED WITH LEGS , SRS A* WELDED WITHOUT LEGS , UNASSEMBLED WITHOUT LEGS SRK A , SRS *Shipped assembled. Coat rod and brackets included. Center section and coat rods are installed in field. National Motor Freight Class: Assembled, 175; Unassembled, PERSON LOCKER WITH C-THRU DOORS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE ASSEMBLED WITH LEGS CSRS * $1, ASSEMBLED WITHOUT LEGS CSRS A* , CSRS A *Shipped assembled. Coat rod and brackets included. Center section and coat rods are installed in field. National Motor Freight Class: Assembled, Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are

29 C-Thru Lockers Welded frames are riveted to welded locker body. WELDED SINGLE TIER C-THRU LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS CSL $ CSL , CSL CSL , CSL CSL , CSL CSL , WITHOUT LEGS CSL C , CSL A CSL C , CSL A CSL C , CSL CSL Shipped assembled. National Motor Freight Class: 175 WELDED DOUBLE TIER C-THRU LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS CDL $ CDL , CDL CDL , CDL CDL , CDL CDL , WITHOUT LEGS CDL A CDL C , CDL C , CDL A CDL C , CDL C , CDL CDL Shipped assembled. National Motor Freight Class: 175 LOCKERS WELDED 6-TIER C-THRU BOX LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS CBL $ CBL , CBL CBL , CBL CBL , WITHOUT LEGS CBL A CBL C , CBL A CBL C , CBL A CBL C , CBL CBL A Shipped assembled. National Motor Freight Class: 175 Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are 29

30 Heavy-Duty Ventilated Lockers Welded frames are riveted to welded locker body. WELDED VENTILATED SINGLE TIER LOCKERS VSL VSL CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS VSL $ VSL , VSL VSL , VSL VSL , WITHOUT LEGS VSL A VSL C , VSL A VSL C , VSL A VSL B , Shipped assembled. National Motor Freight Class: 175 WELDED VENTILATED DOUBLE TIER LOCKERS LOCKERS VDL VDL CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS VDL $ VDL , VDL VDL , WITHOUT LEGS VDL A VDL C , VDL A VDL C , Shipped assembled. National Motor Freight Class: 175 WELDED VENTILATED 6-TIER BOX LOCKERS CATALOG NO. OF OPENING OVERALL UNIT NUMBER COMPARTMENTS W D H W D H WEIGHT PRICE WITH LEGS VBL $ VBL , WITHOUT LEGS VBL A VBL C , Shipped assembled. National Motor Freight Class: 175 VBL VBL Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with this symbol are

31 Door Perforation, Doors & Frame Assemblies COST FOR PERFORATION ON DOORS CAT. NO. DESCRIPTION PERFORATION COST* LPDS-12 SINGLE TIER DOOR 12" WIDE $7.30 LPDS-15 SINGLE TIER DOOR 15" WIDE 7.40 LPDD-12 DOUBLE TIER DOOR 12" WIDE 3.40 LPDD-15 DOUBLE TIER DOOR 15" WIDE 3.90 LPDT-12 TRIPLE TIER DOOR 12" WIDE 5.30 LPDT-15 TRIPLE TIER DOOR 15" WIDE 5.70 LPDB-12 BOX DOOR 12" WIDE 1.50 LPDB-15 BOX DOOR 15" WIDE 6.90 *Cost listed is the additional cost for the door to be perforated. Lockers or Doors must be ordered separately. Perforation is available on all Tennsco lockers with solid doors. For sizes not listed, call factory for pricing. Single Tier Double Tier Triple Tier Box National Motor Freight Class: 85 REPLACEMENT DOORS CAT. NO. DOOR TYPE W H WT. PRICE LSTD-1260 SINGLE TIER $ LSTD-1560 SINGLE TIER LSTD-1272 SINGLE TIER LSTD-1572 SINGLE TIER LSTD-1872 SINGLE TIER LDTD-1230 DOUBLE TIER LDTD-1236 DOUBLE TIER LDTD-1536 DOUBLE TIER LTTD-1224 TRIPLE TIER LBD-1212 BOX LBD-1512 BOX Lockbar and recessed cup included. Single Tier Double Tier Triple Tier Box LOCKERS National Motor Freight Class: 85 REPLACEMENT DOOR FRAME ASSEMBLIES CAT. NO. DOOR TYPE W H WT. PRICE LSFA-1260 SINGLE TIER $ LSFA-1560 SINGLE TIER LSFA-1272 SINGLE TIER LSFA-1572 SINGLE TIER LSFA-1872 SINGLE TIER LSFA-2472 SINGLE TIER LDFA-1260 DOUBLE TIER LDFA-1272 DOUBLE TIER LDFA-1572 DOUBLE TIER LTFA-1272 TRIPLE TIER LTFA-1572 TRIPLE TIER LBFA-1260 BOX LBFA-1272 BOX Lockbar and recessed cup included. Catalog numbers shown are for frames without legs. For frames with legs, add the suffix "-1". National Motor Freight Class: 85 Single Tier Double Tier Triple Tier Box Standard Colors Champagne/ Putty (CPY) Black (BLK) 31

32 Locker Accessories FRONT AND END BASES End Base Front Base FRONT BASES FB $6.20 FB FB FB Use on lockers with legs. END BASES EB $9.90 EB EB EB EB National Motor Freight Class: 85 CLOSED BASES ONE-WIDE BASES CLB $43.00 CLB CLB CLB CLB Leveling feet included. Use on lockers without legs. THREE-WIDE BASES CLB $87.00 CLB CLB CLB CLB CLB National Motor Freight Class: 85 LOCKERS Z-BASES The shape of the Z-Base provides a recessed front base and toe-plate. Z-BASE FRONT LZBA / $23.00 LZBA / LZBA / Z-BASE SIDE LZBS SPLICE PLATE LZBSPL 3 1 /2 3 3 / NOTE: Z-Base only supports front of locker, creating a 4" space beneath the locker. Locker must be anchored to a wall or back-to-back. National Motor Freight Class: LAMINATE HARD MAPLE BENCHES & BENCH PEDESTALS NOTE: Pedestals must be ordered separately. SHELVES FOR STANDARD LOCKERS Standard Colors (Unless Otherwise Specified) Champagne/ Putty (CPY) Black (BLK) *Use three pedestals for benches 108" to 144". HMLB /2 1 1 / $ HMLB /2 1 1 / HMLB /2 1 1 / HMLB /2 1 1 / HMLB /2 1 1 / HMLB /2 1 1 / HMLB-108* /2 1 1 / HMLB-120* /2 1 1 / HMLB-132* /2 1 1 / HMLB-144* /2 1 1 / LBP-1 (BENCH PEDESTAL) 16 1 / Color options not available for HMLB-ww. National Motor Freight Class: 85 ESL /4 1.3 $24.00 ESL / ESL / ESL / ESL / ESL / ESL / National Motor Freight Class: 85 Items with this symbol are

33 Locker Accessories COAT RODS* LCR $1.60 LCR LCR LCR LCR LCR COAT HOOKS LCH-1 SINGLE COAT HOOK LCH-2 DOUBLE COAT HOOK** National Motor Freight Class: 85 CAT. NO. DESCRIPTION WT. PRICE LLCA-1 FOR SINGLE TIER 1.0 $11.70 LLCA-2 FOR DOUBLE TIER LLCA-3 FOR TRIPLE TIER National Motor Freight Class: 85 Coat Rod Single Coat Hook *Coat rods are available in Grey only. **Double Coat Hook can not be used with coat rod. COAT RODS & COAT HOOKS Double Coat Hook LOCKING CHANNELS Locking Channels are a vertical product, but shown horizontal for clarity of detail. Available in Grey only. RECESSED HANDLES CAT. NO. DESCRIPTION WT. PRICE LRH-2 PAINTED STEEL 0.7 $6.60 LRH-3 STAINLESS STEEL Color options not available. National Motor Freight Class: 85 CAT. NO. DESCRIPTION WT. PRICE LL-3 LATCH AND SPRING 0.1 $1.40 LPR-2 PADLOCK RECEIVER LB-1 DOOR BUMPER LDC-1 DART CLIP LRT-1 REINFORCEMENT TAB LTUP-1 TOUCH-UP PAINT Color options not available, except for Touch-Up Paint. National Motor Freight Class: 85 Reinforcement Tab Painted Steel (Black) Door Bumper Dart Clip Latch Stainless Steel MISCELLANEOUS REPLACEMENT PARTS Touch-Up Paint Padlock Receiver All locks can be used on any Tennsco locker except where noted. LOCKS BY MASTER LOCK CAT. NO. DESCRIPTION WT. PRICE* GROOVED KEY LOCK COMBINATION LOCKS GROOVED KEY LOCK MAS-1710MK GROOVED KEY LOCK (DEAD BOLT) 0.4 $47.00 COMBINATION LOCKS MAS-1670 DEAD BOLT (MASTER KEYED) MAS-1654 SPRING BOLT (MASTER KEYED) MAS-1630* GRAVITY LIFT LOCK (MASTER KEYED) COMBINATION PADLOCKS DEAD BOLT SPRING BOLT GRAVITY LIFT MAS-1525 COMBINATION (MASTER KEYED) COMBINATION PADLOCKS MAS-1502 COMBINATION (NO KEY) Master keyed locks are shipped with two master keys. To order additional master keys, see "Keys" (below). *NOTE: Gravity Lift Locks do not work on box lockers. LOCKERS Color options not available. CAT. NO. KEY TYPE FITS LOCK TYPE PRICE* LMCK-1 MASTER KEY (FITS ALL LOCKS IN A SERIES) COMBINATION LOCK $18.30 LMPK-1 MASTER KEY (FITS ALL LOCKS IN A SERIES) COMBINATION PADLOCK LMGK-1 MASTER KEY (FITS ALL LOCKS IN A SERIES) GROOVED KEY LGK-1 SPARE KEY (FITS ONE LOCK ONLY) GROOVED KEY MASTER KEYED NO KEY KEYS Color options not available. National Motor Freight Class: 85 33

34 Locker Accessories NUMBER PLATES & NAME PLATES LNP-3 LNP-5 LNP-A LNP-2 CAT. NO. DESCRIPTION WT. PRICE NUMBER PLATES* LNP-3 NUMBER PLATE 0.1 $2.30 LNP-A ALUMINUM NUMBER PLATE NAME PLATE LNP-5 CUSTOM NAME PLATE** LNP-2 TENNSCO NAME PLATE *Available in numbers ranging from 1 through **Custom plates are available, but must be special-ordered and require a longer lead time. Color options not available. National Motor Freight Class: 85 FLAT TOP C A E K G SLOPING TOP D I B F K H J A. FLAT FILLER PANEL B. ANGLE FILLER PANEL C. FLAT TOP FILLER D. SLOPING TOP FILLER E. FLAT TOP BOXED END PANEL F. SLOPING TOP BOXED END PANEL G. FLAT TOPPED CORNER FILLER H. SLOPING TOP CORNER FILLER I. SLOPING TOP J. CORNER ANGLE K. FILLER PANEL FRAMES LOCKERS FLAT AND ANGLE FILLER PANELS FLAT FILLER PANELS (A) Flat Filler Panel LFF $65.00 LFF LFF LFF LFF LFF LFF LFF LFF LFF LFF LFF TWO FILLER PANEL FRAMES MUST BE USED FLAT AND SLOPING TOP FILLERS FLAT TOP FILLERS (C) Standard Colors Angle Filler Panel ANGLE FILLER PANELS (B) LAF $ LAF LAF LAF LAF LAF LAF LAF LAF LAF LAF LAF ONE FILLER PANEL FRAME MUST BE USED SLOPING TOP FILLERS (D) LFTF $47.00 LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF LFTF National Motor Freight Class: 85 LSTF $50.00 LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF LSTF National Motor Freight Class: Champagne/ Putty (CPY) Black (BLK)

35 FLAT TOP BOXED END PANELS (E) Locker Accessories SLOPING TOP BOXED END PANELS (F) LFTBE $ LSTBE $ LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE LSTBE LFTBE Flat Top LSTBE LFTBE Boxed End Panel NOTE: For left sloping panels, add -L to the catalog number; for right sloping panels, add -R to the catalog number. National Motor Freight Class: 85 BOXED END PANELS Sloping Top Boxed End Panel CORNER FILLERS FLAT TOP CORNER FILLERS (G) LFCF $51.00 LFCF LFCF LFCF LFCF SLOPING TOP CORNER FILLERS (H) LSCF $63.00 LSCF Flat Top LSCF Corner Filler LSCF LSCF National Motor Freight Class: 85 SLOPING TOP --- ONE WIDE (I) SLOPING TOP --- THREE WIDE (I) KST $44.00 KST KST $57.00 KST KST KST KST KST KST Sloping Top KST KST KST One Wide *All sloping tops are shipped unassembled only. National Motor Freight Class: 85 Sloping Top Corner Filler SLOPING TOPS* Sloping Top Three Wide LOCKERS CORNER ANGLE (J) LCAF $32.00 LCAF LCAF LCAF FILLER PANEL FRAMES (K) LFPF $49.00 LFPF LFPF LFPF Corner Angles are a vertical product, but shown horizontal for clarity of detail. National Motor Freight Class: 85 Filler Panel Frames are a vertical product, but shown horizontal for clarity of detail. National Motor Freight Class: 85 CORNER ANGLES FILLER PANEL FRAMES Standard Colors Champagne/ Putty (CPY) Black (BLK) Items with these symbols are 35

36 Locker Accessories A. VERTICAL TRIM B. CORNER SPLICE CAP C. SPLICE CAP D. HORIZONTAL TRIM E. BOTTOM ANGLE F. Z-BRACE LOCKERS TRIM CAT. NO. DESCRIPTION W D H WT. PRICE Horizontal Trim Vertical Trim LHT-72 HORIZONTAL TRIM $49.00 LVT-60L VERTICAL TRIM LVT-60R VERTICAL TRIM LVT-72L VERTICAL TRIM LVT-72R VERTICAL TRIM National Motor Freight Class: 85 CAPS CAT. NO. DESCRIPTION W D H WT. PRICE Splice Cap Corner Splice Cap Outside Corner Cap LSC-1 SPLICE CAP $18.20 LCSC-1 CORNER SPLICE CAP LOCC-1 OUTSIDE CORNER CAP National Motor Freight Class: 85 BRACES & COVERS Z-Brace Standard Colors Bottom Angle CAT. NO. DESCRIPTION W D H WT. PRICE LZB-12 Z-BRACE $26.00 LZB-15 Z-BRACE LZB-18 Z-BRACE LBA-12 BOTTOM ANGLE LBA-15 BOTTOM ANGLE LBA-18 BOTTOM ANGLE National Motor Freight Class: Champagne/ Putty (CPY) Black (BLK)

37 Locker Accessories ADA COMPLIANT LOCKERS Tennsco ADA Compliant Lockers are specifically designed to provide easier access to contents from a seated position. This is achieved through your choice of a bottom riser to raise the lower shelf, an ADA compliant keyless lock, and reduced-height upper shelf and coat hooks. The special ADA compliant lock allows the locker to be opened by simply inserting the key. No turning of the key is required, allowing for single-handed operation. The bottom riser raises items stored on the bottom shelf to a more reachable level. The reduced height upper shelf and coat hooks bring items normally stored high in the locker down to a reachable level. Tennsco will modify several of our standard lockers, offering a variety of choices. ADA Compliant Lockers are available for single tier, double tier (bottom locker only), and triple tier (bottom two lockers only) lockers, and can be custom ordered with the ADA features below. Call factory for details. You may also convert your existing lockers to be ADA compliant by ordering the options below. All ADA Compliant Lockers are shipped with the universal handicap symbol. Call factory for ADA Lock options. ADA REDUCED HEIGHT UPPER SHELVES ADALS $19.70 ADALS ADALS ADALS ADALS Shelf includes three coat hooks. May require drilling for installation. LOCKERS National Motor Freight Class: 85 ADA BOTTOM RISERS ADALSI $19.70 ADALSI ADALSI ADALSI ADALSI For adequate height, must be used only with lockers with legs, or with no-leg lockers installed on a closed base. National Motor Freight Class: 85 ADA STICKER ADA-STK $5.70 Color options not available. National Motor Freight Class: 85 Standard Colors (Unless Otherwise Specified) Champagne/ Putty (CPY) Black (BLK) 37

38 Specialty Lockers CUBBIES CC-78 CC-52 with three CCB-4 Standard Cubby Colors CAT. NO. # OF OPENINGS W D H WT. PRICE CC / / $ CC / / CC / / CC / / CC / / CLEAR BINS FOR CUBBIES CCB / /4 2 1 / CCB / /4 4 1 / CCB / /4 6 1 / CCB / /4 8 1 / EXTRA CUBBY SHELF WITH 4 SHELF CLIPS ECS /4 3 / EXTRA SHELF CLIP CCC EXTRA COAT HOOK LCH coat hooks included per unit. Shipped assembled. National Motor Freight Class: 175 Champagne/ Putty (CPY) Black (BLK) Arctic White (AWH) Estey Blue (EBL) Safety Yellow (YEL) Crimson (CRI) Evergreen (EVG) FIRST RESPONSE LOCKER LOCKERS PLSTS A $3, NUMBER PLATE* LNP-A ALUMINUM NUMBER PLATE *Available in numbers ranging from 1 through National Motor Freight Class: 175 CELL PHONE LOCKERS CAT. NO. # OF OPENINGS W D H WT. PRICE 10-High CP A $1, CP D , High CP A , CP D , NUMBER PLATE* LNP-A ALUMINUM NUMBER PLATE *Available in numbers ranging from 1 through National Motor Freight Class: 175 CP D CP A Standard Colors (Unless Otherwise Specified) 38 Champagne/ Putty (CPY) Black (BLK)

39 Z-Line Low Profile Shelving UNIT SIZE W D H STARTER UNIT WITH DECKING Starter units use four EUR uprights and six DRS end supports; adder units use two ZTP uprights and three DRS end supports. Shelves are supported, on front and rear only, by low profile shelf supports (DRS-dd). 36 deep shelves are supported on all four sides. SHELF CAP.* STARTER UNITS CAT NO. WT. PRICE ADDER UNITS CAT NO. WT. PRICE ADDER UNIT WITH DECKING 4 SHELVES, 3 OPENINGS - With Particleboard Decking - Assembly required. EXTRA SHELF LEVEL CAT NO. WT. PRICE ZA7-3612S-4D 65.0 $ ZA7-3612A-4D 63.0 $ ZAES-3612D 10.9 $ ZA7-3618S-4D ZA7-3618A-4D ZAES-3618D ZA7-3624S-4D ZA7-3624A-4D ZAES-3624D ZA7-3636S-4D ZA7-3636A-4D ZAES-3636D ZA7-4212S-4D ZA7-4212A-4D ZAES-4212D ZA7-4218S-4D ZA7-4218A-4D ZAES-4218D ZA7-4224S-4D ZA7-4224A-4D ZAES-4224D ZA7-4236S-4D ZA7-4236A-4D ZAES-4236D ZA7-4812S-4D ZA7-4812A-4D ZAES-4812D ZA7-4818S-4D ZA7-4818A-4D ZAES-4818D ZA7-4824S-4D ZA7-4824A-4D ZAES-4824D ZA7-4836S-4D ZA7-4836A-4D ZAES-4836D *Load capacity in pounds per shelf level, evenly distributed. Total unit capacity, using four uprights, not to exceed 8,000 lbs., based on 24 centers or less. UNIT SIZE W D H SHELF CAP.* STARTER UNITS CAT NO. WT. PRICE 4 SHELVES, 3 OPENINGS - Without Decking ADDER UNITS CAT NO. WT. PRICE - Assembly required. EXTRA SHELF LEVEL CAT NO. WT. PRICE ZA7-3612S $ ZA7-3612A $ ZAES $ ZA7-3618S ZA7-3618A ZAES ZA7-3624S ZA7-3624A ZAES ZA7-3636S ZA7-3636A ZAES ZA7-4212S ZA7-4212A ZAES ZA7-4218S ZA7-4218A ZAES ZA7-4224S ZA7-4224A ZAES ZA7-4236S ZA7-4236A ZAES ZA7-4812S ZA7-4812A ZAES ZA7-4818S ZA7-4818A ZAES ZA7-4824S ZA7-4824A ZAES ZA7-4836S ZA7-4836A ZAES *Load capacity in pounds per shelf level, evenly distributed. Total unit capacity, using four uprights, not to exceed 8,000 lbs., based on 24 centers or less. SHELVING Standard Colors Items with these symbols are 39

40 Z-Line Long Span Shelving LONG SPAN SHELVING Heavy duty long span units include 3 shelf levels. Units use SUR uprights. Shelves supported on all four sides with heavy duty profile shelf supports (LRA-xx). SHELVING UNIT SIZE W D H UNIT SIZE W D H SHELF CAP.* SHELF CAP.* REINFORCEMENTS PER LEVEL UNITS WITH DECKING CAT NO. WT. PRICE UNITS WITHOUT DECKING CAT NO. WT. PRICE EXTRA SHELF LEVEL CAT NO. WT. PRICE ,250 1 ZL D $ ZLES-4824D 33.0 $ ,250 1 ZL D ZLES-4830D ,250 1 ZL D ZLES-4836D ,250 1 ZL D ZLES-4848D ,000 1 ZL D ZLES-6024D ,000 1 ZL D ZLES-6030D ,000 1 ZL D ZLES-6036D ,000 1 ZL D ZLES-6048D ,750 2 ZL D ZLES-7224D ,750 2 ZL D ZLES-7230D ,750 2 ZL D ZLES-7236D ,750 2 ZL D ZLES-7248D ,250 3 ZL D ZLES-9624D ,250 3 ZL D ZLES-9630D ,250 3 ZL D ZLES-9636D ,250 3 ZL D ZLES-9648D REINFORCEMENTS PER LEVEL EXTRA SHELF LEVEL CAT NO. WT. PRICE ,250 1 ZL $ ZLES $ ,250 1 ZL ZLES ,250 1 ZL ZLES ,250 1 ZL ZLES ,000 1 ZL ZLES ,000 1 ZL ZLES ,000 1 ZL ZLES ,000 1 ZL ZLES ,750 2 ZL ZLES ,750 2 ZL ZLES ,750 2 ZL ZLES ,750 2 ZL ZLES ,250 3 ZL ZLES ,250 3 ZL ZLES ,250 3 ZL ZLES ,250 3 ZL ZLES *Load capacity in pounds per shelf level, evenly distributed. Total unit capacity not to exceed 13,000 lbs. per unit (3,250 lbs. per post) based on 24 centers or less. 40 Standard Colors Items with this symbol are

41 Z-Line Record Archive & Steel Shelf Units RECORD ARCHIVE STORAGE RACKS UNIT SIZE W D H NO. OF OPENINGS SHELF CAP.* UNITS WITHOUT DECKING CAT NO. WT. PRICE UNITS WITH DECKING CAT NO. WT. PRICE ,250 ZA $ ZA D 73.0 $ ,250 ZA ZA D ,250 ZA ZA D ,250 ZA ZA D ,800 ZA ZA D ,800 ZA ZA D ,800 ZA ZA D ,800 ZA ZA D *Load capacity figures are calculated in pounds per shelf level, evenly distributed. Total unit capacity, using four EUR uprights, not to exceed 8,000 lbs., based on 24 centers or less. STEEL SHELF UNITS Starter and adder units include 5 shelf levels. Starter units use 4 EUR uprights; adder units use 2 ZTP uprights. Each unit is stabilized by VDRS shelf supports at both top and bottom. Intermediate shelves are attached by 4 ZSC-1 shelf clips. No sway braces required, allowing access from all 4 sides. UNIT SIZE W D H SHELF CAP.* STARTER UNITS CAT NO. WT. PRICE ADDER UNITS CAT NO. WT. PRICE EXTRA SHELF LEVEL CAT NO. WT. PRICE ZM7-3612S-5D 61.0 $ ZM7-3612A-5D 59.0 $ ZMS $ ZM7-3618S-5D ZM7-3618A-5D ZMS ZM7-3624S-5D ZM7-3624A-5D ZMS ZM7-3636S-5D ZM7-3636A-5D ZMS ZM7-4212S-5D ZM7-4212A-5D ZMS ZM7-4218S-5D ZM7-4218A-5D ZMS ZM7-4224S-5D ZM7-4224A-5D ZMS ZM7-4236S-5D ZM7-4236A-5D ZMS ZM7-4812S-5D ZM7-4812A-5D ZMS ZM7-4818S-5D ZM7-4818A-5D ZMS ZM7-4824S-5D ZM7-4824A-5D ZMS ZM7-4836S-5D ZM7-4836A-5D ZMS *Load capacity figures are calculated in pounds per shelf level, evenly distributed. Total unit capacity, using four EUR uprights, not to exceed 8,000 lbs., based on 24 centers or less. SHELVING Standard Colors Items with these symbols are 41

42 Z-Line Sloping Shelf & Tire Rack Units SLOPING SHELF UNITS (FLAT SLOPE STYLE) Includes 5 sloped shelves and one top shelf. Units can be placed back to back for double entry (shown). TIRE RACK UNIT SIZE W D H SHELF CAP.* STARTER UNITS CAT NO. WT. PRICE ADDER UNITS CAT NO. WT. PRICE EXTRA SHELF LEVEL CAT NO. WT. PRICE ZT7-3618S ZT7-3618A ZSSS ZT7-3624S ZT7-3624A ZSSS ZT7-4818S ZT7-4818A ZSSS ZT7-4824S ZT7-4824A ZSSS *Load capacities are per shelf, evenly distributed and based on shelves spaced on 24 centers. Weight not to exceed a total of 1,500 lbs. per unit. NOT FOR USE WITH TIRES MOUNTED ON WHEELS NOTE: Single Entry units must be tied to wall. Single Entry units include one 12 deep unit and one 9 wall tie. SHELVING Double Entry units include two 12 deep units and one 18 deep cross aisle tie. UNIT SIZE W D H ZST-6084S # OF OPENINGS TIRE CAP. ZDT-6084S STARTER UNITS CAT NO. WT. PRICE ADDER UNITS CAT NO. WT. PRICE SINGLE ENTRY 60 21* ZST-6060S 38.0 $ ZST-6060A 34.0 $ * ZST-6084S ZST-6084A * ZST-60120S ZST-60120A * ZST-60144S ZST-60144A DOUBLE ENTRY 60 42** ZDT-6060S ZDT-6060A ** ZDT-6084S ZDT-6084A ** ZDT-60120S ZDT-60120A ** ZDT-60144S ZDT-60144A *Single Entry units include one 12 deep unit and necessary 9 deep wall tie(s). Quantity depends on height. **Double Entry units include two 12 deep units and necessary 18 deep cross aisle tie(s). Quantity depends on height. 42 Standard Colors Items with these symbols are

43 Die Racks & Stur-D-Stor Shelving HEAVY-DUTY REINFORCED SHELVING (DIE RACK UNIT) Die rack units include 5 shelf levels. Available in Grey only. UNIT SIZE W D H RXHS SHELF CAP.* REINFORCEMENTS PER LEVEL SHELVING UNITS CAT NO. WT. PRICE RXHS EXTRA SHELF LEVEL CAT NO. WT. PRICE ,000 1 RXHS $ RXHS $ ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,250 1 RXHS RXHS ,750 2 RXHS , RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,250 1 RXHS RXHS ,750 2 RXHS , RXHS ,750 2 RXHS , RXHS ,600 3 RXHS , RXHS ,600 3 RXHS , RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,000 1 RXHS RXHS ,250 1 RXHS RXHS ,750 2 RXHS , RXHS ,750 2 RXHS , RXHS ,600 3 RXHS , RXHS ,600 3 RXHS , RXHS *Load capacities are per shelf, evenly distributed. Weight not to exceed a total of 13,000 lbs. per unit and based on shelves spaced on 24 centers. Other heights are available; call factory for pricing. STUR-D-STOR SHELVING SHELVING CAT. NO. SHELF CAP. NO. OF OPENINGS W D H WT. PRICE SHELVING PACKAGE LSS , / / $ LSS / / HARD NYLON PROTECTIVE FOOT CAP EURNF 1 1 /2 1 1 /2 3 / Includes 1 /2 thick particleboard shelves and 8 plastic post caps. Ships in one pre-packaged box. May be configured as a five-shelf shelving unit or as a work table. Shelving available in only. Protective foot caps are available in Black only. EURNF Standard Colors (Unless Otherwise Specified) Items with these symbols are (BLK) 43

44 Z-Line Components: Posts & Supports UPRIGHT POSTS STANDARD ANGLE POST (EUR) Total weight capacity not to exceed 8,000 lbs. per unit (2,000 lbs. per post), based on 24 shelf centers or less. INTERMEDIATE T POST (ZTP) Total weight capacity not to exceed 11,000 lbs. per unit (5,500 lbs. per post), based on 24 shelf centers or less. HIGH CAPACITY ANGLE POST (SUR) Total weight capacity not to exceed 13,000 lbs. per unit (3,250 lbs. per post), based on 24 shelf centers or less. All posts slotted for shelf adjustment on 1 1 /2 centers. National Motor Freight Class: 50 CAT. NO. W D LENGTH WT. PRICE STANDARD ANGLE POST EUR / / $7.70 EUR / / EUR / / EUR / / EUR / / EUR / / EUR / / EUR / / EUR / / EUR / / INTERMEDIATE T POST ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / ZTP / / HIGH CAPACITY ANGLE POST SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SUR / / SHELVING SHELF SUPPORTS LOW PROFILE SHELF SUPPORTS Profile View Shelf supports are 27 /32 d x 1 1 /8 h. *Load capacities are based on evenly distributed loads. LOAD CAT. NO. CAP.* GA. LENGTH WT. PRICE LOW PROFILE SHELF SUPPORTS DRS $3.40 DRS DRS DRS DRS DRS DRS DRS DRS DRS DRS Gauge Profile View 16 Gauge Profile View MEDIUM DUTY SHELF SUPPORTS Supports slotted on for optional FBSV-dd front-to-back deck supports. Load capacities are based on recommended number of deck supports. Standard Colors LOAD RECOMMENDED # CAT. NO. CAP.* REINFORCEMENTS GA. LENGTH WT. PRICE MEDIUM DUTY SHELF SUPPORTS VDRS , VDRS , VDRS , VDRS , VDRS , VDRS , VDRS VDRS , VDRS VDRS VDRS VDRS VDRS *Load capacities are based on evenly distributed loads. Items with this symbol are

45 Z-Line Components: Supports & Reinforcements LOAD RECOMMENDED # CAT. NO. CAP.* REINFORCEMENTS GA. LENGTH WT. PRICE HEAVY-DUTY SHELF SUPPORTS LRA-12 2, $4.60 LRA-15 2, LRA-16 2, LRA-18 2, LRA-24 2, LRA-30 2, LRA-32 2, LRA-36 2, LRA-42 2, LRA-48 2, LRA-60 2, LRA-69 1, LRA-72 1, LRA-84 1, LRA-96 1, EXTRA HEAVY-DUTY SHELF SUPPORTS LRC-48 2, LRC-60 2, LRC-72 2, LRC-84 1, LRC-96 1, SEISMIC SHELF SUPPORTS SSC-36 2, SSC-48 2, SSC-60 2, SSC-72 2, SSC-84 1, SSC-96 1, *Load capacities are based on evenly distributed loads. Prof ile View HEAVY-DUTY SHELF SUPPORTS SHELF SUPPORTS Shelf supports are 1 d x 2 3 /4 h. Load capacities are based on recommended number of SDS-dd front-to-back deck reinforcements. EXTRA HEAVY-DUTY SHELF SUPPORTS Shelf supports are 1 d x 3 1 /4 h. Prof ile View Load capacities are based on recommended number of SDS-dd front-to-back deck reinforcements. Use left to right only; not to be used front to back. Cannot be installed in bottom two keyholes of uprights; Will not sit flush on the floor. SEISMIC SUPPORT CHANNEL Prof ile View Shelf supports are 1 1 /2 d x 4 13 /32 h. Load capacities are based on recommended number of SDS-dd front-to-back deck reinforcements. Allows unit to be secured to floor in order to meet seismic requirements. DECK REINFORCEMENTS MEDIUM DUTY DECK REINFORCEMENTS FBSV / /8 0.6 $4.50 FBSV / / FBSV / / FBSV / / FBSV / / FBSV / / FBSV / / FBSV / / HEAVY DUTY DECK REINFORCEMENTS SDS-12 7 / / SDS-15 7 / / SDS-16 7 / / SDS-18 7 / / SDS-24 7 / / SDS-30 7 / / SDS-32 7 / / SDS-36 7 / / SDS-42 7 / / SDS-48 7 / / Provides center support for decking. Use with VDRS. SHELVING Provides center support for decking. Use with LRA, LRC or SSC only. Standard Colors Items with these symbols are 45

46 Z-Line Components: Decking Options PARTICLEBOARD DECKING WIRE DECKING SHELVING Industrial grade 5 /8 thick particleboard provides a sturdy work surface that is both strong and economical. PB /8 7.5 $6.90 PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / Available in Natural only. National Motor Freight Class: 55 STEEL SHELVES Attaches to upright posts with four shelf clips per shelf (included). Shelf clips allow for access from all four sides of the unit. NOTE: When building your own unit with steel shelves, you MUST use VDRS supports at the top and bottom of the unit, on all four sides for stabilization. Shelf clips alone are NOT sufficient to stabilize unit. In addition, units 96 and taller must use VDRS supports in the center of the unit, on all four sides. Shelf Clip Wire decking uses 5 gauge wire & consists of a 2 x 4 mesh pattern. Additional sizes are available; contact factory for pricing. Wire decking is subject to longer than normal lead times; contact factory for specifics. Not recommended for shelf levels with DRS supports deeper than 24. ZWD / $30.00 ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD-8424* / ZWD-8436* / ZWD-8448* / ZWD-9624* / ZWD-9636* / ZWD-9648* / *84"w and 96 w are shipped as two pieces and should be tied together with zip ties. NOTE: Price shown is for Grey. For price of or, add a 10% upcharge. CAT. NO. GAUGE W D H WT. PRICE ZMS / $28.00 ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / ZMS / REPLACEMENT SHELF CLIPS ZSC For load capacities, refer to Q2-wwdd chart on page Standard Colors (Unless Otherwise Specified Items with these symbols are (UNF) (ZNC)

47 Z-Line Components: Accessories SIDE PANELS ZLEP $77.00 ZLEP ZLEP ZLEP ZLEP BACK PANELS ZLBP ZLBP ZLBP CLIPS FOR PANELS Z-CLIP BACK PANEL Back panels fit units with EUR and ZTP posts. Back consists of two pieces. Includes 10 attachment clips. Other sizes available; contact factory. SIDE AND BACK PANELS SIDE PANEL Side panels fit starter units with EUR posts only. Side consists of two pieces. Includes 10 attachment clips. Other sizes available; contact factory. SHELF DIVIDER DIV $21.00 Use on particleboard, front-to-back, to subdivide shelf into several storage areas. Profile View CASTER KITS CAT. NO. CASTERS W D H WT. PRICE ZLCK-1 2 Fixed, 2 Swivel 1 1 /2 1 1 /2 7 / $ ZLCK-2 4 Swivel 3 7 / / Load capacity for caster kit is 1,000 lbs. Casters should not be used with units over 96 tall, or on units less than 18 deep. Maximum unit size is 60 wide by 30 deep. HANG RODS CAT. NO. LOAD CAP. W D H WT. PRICE FOR LRA OR LRC SUPPORTS Channel-Shaped Hang Rods PHR /4 1 5 / / $10.30 PHR /4 1 5 / / Used for hanging items left-to-right on a Z-Line unit. Attaches between two LRA shelf supports. SHELVING PROTECTIVE CAPS CAT. NO. Use With W D H WT. PRICE SOFT TOP EDGE CAPS EURPC EUR Uprights 1 1 /2 1 1 /2 7 / $1.10 ZTPPC ZTP Uprights 3 7 / / SURPC SUR Uprights 2 3 /4 2 3 /4 7 / HARD NYLON FOOT CAPS EURNF EUR Uprights 1 1 /2 1 1 /2 3 / ZTPNF ZTP Uprights 3 7 / / SURNF SUR Uprights 2 3 /4 2 3 /4 3 / Available in Black only. Place top edge caps over top of uprights to protect from sharp edges. Place foot caps beneath uprights as a floor protector. Hard Nylon Foot Caps Soft Top Edge Caps Standard Colors (Unless Otherwise Specified) Items with these symbols are (BLK) 47

48 Z-Line Components: Accessories CROSS AISLE TIES CAT / /8 1.4 $11.80 CAT / / CAT / / CAT / / CAT / / CAT / / Used to link across an aisle for extra stability. ADJUSTABLE AISLE TIE KCAT-1 3 * $34.00 *Depth adjusts from 36 to 60 Links units across an aisle at adjustable distances. POST SPLICE ANGLE Includes hardware. Used for splicing EUR, SUR and ZTP upright posts. When splicing ZTP uprights, two post splice angles are required per post. PSA / / /2 1.1 $8.60 WALL TIE Used to secure a unit to a wall, with a 9 gap between the unit and the wall. WT /4 1 3 /8 2 3 /8.7 $4.80 TIE PLATE SHELVING ANCHOR PLATE Used to secure two angle posts together front-to-back or side-by-side. TP /4.2 $1.90 Attaches to uprights to allow anchoring uprights to the floor. ZFA /8 1 1 /2 2 3 /8.2 $ FOOT PLATES ZFP-L Standard Colors DZFP Attaches to uprights to allow anchoring uprights to the floor. ZFP-L FOOT PLATE FOR LEFT UPRIGHT (EUR or SUR) 1 3 /8 1 1 /2 2 3 /8.2 $2.00 ZFP-R FOOT PLATE FOR RIGHT UPRIGHT (EUR or SUR) 1 3 /8 1 1 /2 2 3 / DZFP FOOT PLATE FOR ZTP UPRIGHTS 2 3 /4 1 1 /2 2 3 / Items with these symbols are

49 Automotive Shelving PRE-CONFIGURED SHELVING UNITS CAT. NO. # SHELVES W D H WT. PRICE P $ P Units include back but no end panels. Order end panels separately to provide flush finished ends for row. Dimensions shown are outside dimensions. Assembly Required. UPRIGHTS (Sold As Pairs) P-8401 P-8411 End Panels (Sold As Pairs) P / $ P / P-84E 1 1 / / $73.00 P-96E 1 1 / / P-84E BACKS BIN BOXES P / $ P / Bin Box P / /4 2.0 $27.00 Bin Box Divider P-55D 5 3 /16 1 / / Each shelf can hold up to 6 bin boxes. P-55 When placing units back to back (as in double-face application), units may share a common back. P-55D LABEL HOLDERS SLIDING DIVIDERS SHELVING P-3 P-38F Short Width - Use Between Dividers P /4 0.1 $.91 Full Shelf-Width P /4 11 /64 7 / Fastener For Full Shelf-Width Holders P-38F P $8.20 P / P P-38 P-45 Top P / /8 1 1 /8 6.3 $29.00 Bottom P-12B /8 3 1 / Shelf P / /8 7 / Standard Colors (Unless Otherwise Specified) P-1238 Tops, Bottoms, Shelves P-12B P-12 49

50 Bulk Storage Racks BULK STORAGE RACKS - 24 DEEP *Load capacities are based on evenly distributed loads. **Wire Decking available in Grey only. SHELVING STARTER UNIT SIZE SHELF STARTER UNITS ADDER UNITS EXTRA SHELF LEVEL W D H CAP.* CAT NO. WT. PRICE CAT NO. WT. PRICE CAT NO. WT. PRICE Particleboard Decking ,150 BU PS 154 $ BU PA 134 $ BU-4824P 38.0 $ ,750 BU PS BU PA BU-7224P ,150 BU PS BU PA BU-9624P ,150 BU PS BU PA BU-4824P ,750 BU PS BU PA BU-7224P ,150 BU PS BU PA BU-9624P ,150 BU PS BU PA BU-4824P ,750 BU PS BU PA BU-7224P ,150 BU PS BU PA BU-9624P ,150 BU PS BU PA BU-4824P ,750 BU PS BU PA BU-7224P ,150 BU PS BU PA BU-9624P Corrugated Decking ,150 BU CS BU CA BU-4824C ,750 BU CS BU CA BU-7224C ,150 BU CS BU CA BU-9624C ,150 BU CS BU CA BU-4824C ,750 BU CS BU CA BU-7224C ,150 BU CS BU CA BU-9624C ,150 BU CS BU CA BU-4824C ,750 BU CS BU CA BU-7224C ,150 BU CS BU CA BU-9624C ,150 BU CS BU CA BU-4824C ,750 BU CS BU CA BU-7224C ,150 BU CS BU CA BU-9624C Wire Decking** ,150 BU WS BU WA BU-4824W ,750 BU WS BU WA BU-7224W ,150 BU WS BU WA BU-9624W ,150 BU WS BU WA BU-4824W ,750 BU WS BU WA BU-7224W ,150 BU WS BU WA BU-9624W ,150 BU WS BU WA BU-4824W ,750 BU WS BU WA BU-7224W ,150 BU WS BU WA BU-9624W ,150 BU WS BU WA BU-4824W ,750 BU WS BU WA BU-7224W ,150 BU WS BU WA BU-9624W No Decking ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ADDER 50 Standard Colors (Unless Otherwise Specified) Items with this symbol are

51 Bulk Storage Racks *Load capacities are based on evenly distributed loads. BULK STORAGE RACKS - 36 DEEP **Wire Decking available in Grey only. STARTER UNIT SIZE SHELF STARTER UNITS ADDER UNITS EXTRA SHELF LEVEL W D H CAP.* CAT NO. WT. PRICE CAT NO. WT. PRICE CAT NO. WT. PRICE Particleboard Decking ,150 BU PS 193 $ BU PA 171 $ BU-4836P 50.0 $ ,750 BU PS BU PA BU-7236P ,150 BU PS BU PA BU-9636P ,150 BU PS BU PA BU-4836P ,750 BU PS BU PA BU-7236P ,150 BU PS BU PA BU-9636P ,150 BU PS BU PA BU-4836P ,750 BU PS BU PA BU-7236P ,150 BU PS BU PA BU-9636P ,150 BU PS BU PA BU-4836P ,750 BU PS BU PA BU-7236P ,150 BU PS BU PA BU-9636P Corrugated Decking ,150 BU CS BU CA BU-4836C ,750 BU CS BU CA BU-7236C ,150 BU CS BU CA BU-9636C ,150 BU CS BU CA BU-4836C ,750 BU CS BU CA BU-7236C ,150 BU CS 281 1, BU CA BU-9636C ,150 BU CS BU CA BU-4836C ,750 BU CS BU CA BU-7236C ,150 BU CS 291 1, BU CA BU-9636C ,150 BU CS BU CA BU-4836C ,750 BU CS BU CA BU-7236C ,150 BU CS 303 1, BU CA BU-9636C Wire Decking** ,150 BU WS BU WA BU-4836W ,750 BU WS BU WA BU-7236W ,150 BU WS BU WA BU-9636W ,150 BU WS BU WA BU-4836W ,750 BU WS BU WA BU-7236W ,150 BU WS 257 1, BU WA BU-9636W ,150 BU WS BU WA BU-4836W ,750 BU WS BU WA BU-7236W ,150 BU WS 267 1, BU WA BU-9636W ,150 BU WS BU WA BU-4836W ,750 BU WS BU WA BU-7236W ,150 BU WS 279 1, BU WA BU-9636W No Decking ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ADDER SHELVING Standard Colors (Unless Otherwise Specified) Items with these symbols are 51

52 Bulk Storage Racks BULK STORAGE RACKS - 48 DEEP *Load capacities are based on evenly distributed loads. **Wire Decking available in Grey only. SHELVING STARTER UNIT SIZE SHELF STARTER UNITS ADDER UNITS EXTRA SHELF LEVEL W D H CAP.* CAT NO. WT. PRICE CAT NO. WT. PRICE CAT NO. WT. PRICE Particleboard Decking ,150 BU PS 229 $ BU PA 206 $ BU-4848P 61.0 $ ,750 BU PS BU PA BU-7248P ,150 BU PS BU PA BU-9648P ,150 BU PS BU PA BU-4848P ,750 BU PS BU PA BU-7248P ,150 BU PS BU PA BU-9648P ,150 BU PS BU PA BU-4848P ,750 BU PS BU PA BU-7248P ,150 BU PS BU PA BU-9648P ,150 BU PS BU PA BU-4848P ,750 BU PS BU PA BU-7248P ,150 BU PS BU PA BU-9648P Corrugated Decking ,150 BU CS BU CA BU-4848C ,750 BU CS BU CA BU-7248C ,150 BU CS 331 1, BU CA 308 1, BU-9648C ,150 BU CS BU CA BU-4848C ,750 BU CS 246 1, BU CA BU-7248C ,150 BU CS 339 1, BU CA 312 1, BU-9648C ,150 BU CS BU CA BU-4848C ,750 BU CS BU CA BU-7248C ,150 BU CS 351 1, BU CA 318 1, BU-9648C ,150 BU CS BU CA BU-4848C ,750 BU CS 295 1, BU CA BU-7248C ,150 BU CS 361 1, BU CA 323 1, BU-9648C Wire Decking** ,150 BU WS BU WA BU-4848W ,750 BU WS BU WA BU-7248W ,150 BU WS 283 1, BU WA 260 1, BU-9648W ,150 BU WS BU WA BU-4848W ,750 BU WS BU WA BU-7248W ,150 BU WS 291 1, BU WA 264 1, BU-9648W ,150 BU WS BU WA BU-4848W ,750 BU WS BU WA BU-7248W ,150 BU WS 303 1, BU WA 270 1, BU-9648W ,150 BU WS BU WA BU-4848W ,750 BU WS BU WA BU-7248W ,150 BU WS 313 1, BU WA 275 1, BU-9648W No Decking ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ,150 BU S BU A BU ,750 BU S BU A BU ,150 BU S BU A BU ADDER 52 Standard Colors (Unless Otherwise Specified) Items with this symbol are

53 Bulk Storage: Components BULK UPRIGHTS 72 High BUF / $80.00 BUF / BUF-4272* 1 3 / BUF / High BUF / BUF / BUF / High BUF / BUF / BUF-4296* 1 3 / BUF / High BUF / BUF / BUF-42120* 1 3 / BUF / High BUF-24144* 1 3 / BUF-36144* 1 3 / BUF-48144* 1 3 / High BUF-24168* 1 3 / BUF-36168* 1 3 / BUF-48168* 1 3 / High BUF-24192* 1 3 / BUF-36192* 1 3 / BUF-48192* 1 3 / *Note: Quantities less than 50 uprights, please add $250 list set-up charge. Other sizes available, contact factory for pricing. 17,000 lbs. capacity based on maximum vertical distance of 24 between any two beams on floor. 120 High 96 High 168 High 72 High 144 High 192 High RACK SPACER SHELVING BRS / / $12.00 Used to attach back-to-back units. Maintains a 6 gap to meet fire codes. BULK UPRIGHT EXTENSION SPBUF / / / $11.70 Used to splice two bulk frames together for additional height. Top upright must be ordered without welded feet. Standard Colors Items with these symbols are 53

54 Bulk Storage: Components DECKING TYPES Wire Decking* Particleboard Decking Corrugated Steel Decking Deck Level * Wire decking uses 5 gauge wire and consists of a 2" x 4" mesh pattern. Price shown for wire decking is for Grey. For price of or, add a 10% upcharge. Wire Decking* ZWD / $54.00 ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / ZWD / Corrugated Steel Decking BSD / BSD / BSD / BSD / BSD / BSD / BSD / BSD / BSD / BSD / BSD / BSD / Particleboard Decking PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / PB / DECK LEVELS SHELVING BPB Includes two plywood beams, deck level reinforcements and safety plugs. CAT. NO. Reinforcements Included Load Cap. WT. PRICE BPB , $64.00 BPB , BPB , BPB , BPB BPB , BPB , BPB , BPB , BPB , BPB BPB , DECK LEVEL REINFORCEMENTS BPS-36 BPS / $5.20 BPS / BPS / Standard Colors (Unless Otherwise Specified) Items with these symbols are (UNF)

55 Bulk Storage: Components BOX BEAMS (Sold in Pairs) CAT. NO. LOAD CAP. W D H WT. PRICE BHC * 48 1 /2 1 1 / $48.00 BHC * 60 1 /2 1 1 / BHC * 72 1 /2 1 1 / BHC * 96 1 /2 1 1 / *Capacity calculated for evenly distributed load using recommended number of box beam braces. BOX BEAM BRACES SDS-24B 7 / / $6.10 SDS-36B 7 / / SDS-42B 7 / / SDS-48B 7 / / Use with BHC-ww. Use two SDS-ddB on 48 and four SDS-ddB on 60, 72 and 96 beams. WATERFALL STYLE WIRE DECKING BWD / $ BWD / NOTE: Price shown is for Grey. For price of or, add a 10% upcharge. Meets factory mutual codes. 2 x 4 mesh pattern. 2 box beam braces (sold above) required per deck. SDLC / / $1.40 TECHSCREWS Other sizes available, Contact factory for details. Use with box beams (BHC-ww). TECHSCREWS SDLC-1 Used to hold down bar grating on a mezzanine. Attaches with one tech screw. SADDLE CLIP SHELVING SAFETY PLUGS BSP $1.90 Standard Colors 55

56 Q-Line Industrial Clip Shelving OPEN STYLE SHELVING *Load capacities are based on evenly distributed loads. Starter Units Include: 4 Offset Angle Posts 2 Sets of Side Sway Braces 1 Set of Back Sway Braces 5 Steel Shelves AB Adder Units Include: 2 Offset Angle Posts 1 Beaded Post 1 Set of Side Sway Braces 1 Set of Back Sway Braces 5 Steel Shelves A Adder Units Include: 4 Offset Angle Posts 1 Set of Side Sway Braces 1 Set of Back Sway Braces 5 Steel Shelves National Motor Freight Class: 70 National Motor Freight Class: 70 National Motor Freight Class: 70 QOH5-3618S UNIT SIZE SHELF STARTER UNITS ADDER UNITS EXTRA SHELF W D H CAP.* CAT. NO. WT. PRICE CAT. NO. WT. PRICE CAT. NO. WT. PRICE CAT. NO. WT. PRICE 20 Gauge, 5 Shelves ,000 QOH5-3612S 69 $ QOH5-3612AB 62 $ QOH5-3612A 66 $ Q $ QOH5-3618S QOH5-3618AB QOH5-3618A Q QOH5-3624S QOH5-3624AB QOH5-3624A Q QOH5-4812S QOH5-4812AB QOH5-4812A Q QOH5-4818S QOH5-4818AB QOH5-4818A Q QOH5-4824S QOH5-4824AB QOH5-4824A Q Gauge, 5 Shelves QO5-3612S QO5-3612AB QO5-3612A Q QO5-3618S QO5-3618AB QO5-3618A Q QO5-3624S QO5-3624AB QO5-3624A Q QO5-4812S QO5-4812AB QO5-4812A Q QO5-4818S QO5-4818AB QO5-4818A Q QO5-4824S QO5-4824AB QO5-4824A Q CLOSED STYLE SHELVING QOH5-3618AB *Load capacities are based on evenly distributed loads. QOH5-3618A Starter Units Include: 4 Offset Angle Posts 2 Side Panels 1 Back Panel 5 Steel Shelves AB Adder Units Include: 2 Offset Angle Posts 1 Beaded Post 1 Side Panel 1 Back Panel 5 Steel Shelves A Adder Units Include: 4 Offset Angle Posts 1 Side Panel 1 Back Panel 5 Steel Shelves SHELVING National Motor Freight Class: 70 National Motor Freight Class: 70 National Motor Freight Class: QCH5-3618S QCH5-3618AB QCH5-3618A UNIT SIZE SHELF STARTER UNITS ADDER UNITS EXTRA SHELF W D H CAP.* CAT. NO. WT. PRICE CAT. NO. WT. PRICE CAT. NO. WT. PRICE CAT. NO. WT. PRICE 20 Gauge, 5 Shelves ,000 QCH5-3612S 95 $ QCH5-3612AB 85 $ QCH5-3612A 90 $ Q $ QCH5-3618S QCH5-3618AB QCH5-3618A Q QCH5-3624S QCH5-3624AB QCH5-3624A Q QCH5-4812S QCH5-4812AB QCH5-4812A Q QCH5-4818S QCH5-4818AB QCH5-4818A Q QCH5-4824S QCH5-4824AB QCH5-4824A Q Gauge, 5 Shelves QC5-3612S QC5-3612AB QC5-3612A Q QC5-3618S QC5-3618AB QC5-3618A Q QC5-3624S QC5-3624AB QC5-3624A Q QC5-4812S QC5-4812AB QC5-4812A Q QC5-4818S QC5-4818AB QC5-4818A Q QC5-4824S QC5-4824AB QC5-4824A Q Standard Colors Items with this symbol are

57 Q-Line Shelving: Components Offset Angle Post OAP / $7.60 OAP / OAP / OAP / OAP / OAP / OAP / OAP / OAP / OAP / OAP / Beaded T-Post BTP-39* 3 /8 1 7 / BTP-48* 3 /8 1 7 / BTP-51* 3 /8 1 7 / BTP-75 3 /8 1 7 / BTP-84 3 /8 1 7 / BTP-87 3 /8 1 7 / Heavy Duty Beaded T-Post HBP-39* 3 /4 2 7 / HBP-48* 3 /4 2 7 / HBP-51* 3 /4 2 7 / HBP-75* 3 /4 2 7 / HBP-84* 3 /4 2 7 / HBP-87 3 /4 2 7 / HBP-99 3 /4 2 7 / HBP-111* 3 /4 2 7 / HBP-123* 3 /4 2 7 / *Add $600 net set-up charge. OFFSET ANGLE POST BEADED T-POST HEAVY DUTY BEADED POST UPRIGHT POSTS Post slotted for shelf adjustment on 1 centers. Total weight capacity not to exceed 5,000 lbs. per unit for OAP and HBP posts. Weight capacity not to exceed 3,500 lbs per unit for BTP posts. Capacities based upon 24 shelf centers or less. DEPTH CAT. NO. H WT. PRICE 12 DEEP WU $47.00 WU WU WU WU " DEEP WU WU WU WU WU " DEEP WU WU WU WU WU DEEP WU WU WU WU WU " DEEP WU WU WU WU WU " DEEP WU WU WU WU WU WELDED UPRIGHTS These are panels attached to OAP style posts. For quantities of less than 50 pieces, add $100/list setup charge. Contact factory for pricing on intermediate welded uprights. SHELVING Standard Colors Items with these symbols are 57

58 Q-Line Shelving: Components BACK PANELS *NOTE: 42 & 48 backs consist of two pieces. CAT. NO. H WT. PRICE 36 Wide BP $44.00 BP BP BP BP BP Wide* BP BP BP BP BP BP Wide* BP BP BP BP BP BP END PANELS SHELVING DEPTH CAT. NO. H WT. PRICE 12 DEEP EP $12.70 EP EP EP EP EP " DEEP EP EP EP EP EP EP " DEEP EP EP EP EP EP EP DEEP EP EP EP EP EP EP " DEEP EP EP EP EP EP EP " DEEP EP EP EP EP EP EP Standard Colors Items with this symbol are

59 Q-Line Shelving: Components SHELVES CAT. NO. Load Cap. W D H WT. PRICE 22 Gauge Q / $26.00 Q / Q / Q / Q2-3630* / Q / Q / Q / Q / Q2-4230* / Q / Q / Q / Q / Q2-4830* / Gauge Q , / Q-3615* / Q / Q / Q-3630* / Q-3636* / Q-4212* / Q-4215* / Q / Q / Q-4230* / Q-4236* / Q / Q-4815* / Q / Q / Q-4830* / Q-4836* / CAT. NO. Load Cap. W D H WT. PRICE PQ2-3612P / $31.00 PQ2-3615P / PQ2-3618P / PQ2-3624P / PQ2-3630P / PQ2-4215P / PQ2-4224P / PQ2-4230P / PQ2-4812P / PQ2-4815P / PQ2-4818P / PQ2-4824P / PQ2-4830P / PQ2-4836P / shelf clips per shelf included. *For quantities less than 250, add $300 list set-up charge. **Bin dividers cannot be used on shelves with stiffeners. 4 shelf clips per shelf included. Shelves are made from Box Form construction with closed welded corners. CAT. NO. Load Cap. W D H WT. PRICE 20 Gauge With Stiffeners** Q-3624-S* 1, / $70.00 Q-3630-S* 1, / Q-3636-S* / Q-4224-S* / Q-4230-S* / Q-4236-S* / Q-4824-S* / Q-4830-S* / Q-4836-S* / PERFORATED SHELVES SHELVING LH /16 7 /8 0.3 $3.10 LH /16 7 / LH /16 7 / T /2 2 3 /4 0.1 $0.58 Attachment plugs included. SHELF LABEL HOLDERS REPLACEMENT SHELF CLIPS Attaches shelves to uprights. Shelf clips are Zinc Plated. Standard Colors (Unless Otherwise Specified) Items with these symbols are 59

60 Q-Line Shelving: Components BIN DIVIDERS BIN FRONTS *For quantities of less than 250 pieces, add $300/list setup charge. 12 Deep BD / $4.70 BD / BD / BD-1215* 7 / BD / Deep BD-1506* 7 / BD-1509* 7 / BD-1512* 7 / BD-1515* 7 / BD-1518* 7 / Deep BD / BD / BD / BD / BD / END SWAY PLATES Includes hardware. BF / $8.80 BF / BF / ESP / $7.80 ESP / ESP / SHELVING FOOT PLATE Used to secure uprights to the floor. FP /2 1 / /4 0.1 $0.92 SEISMIC FOOT PLATE Single Foot Plate for OAP Two Foot Plates for HBP IFP /4 1 5 /8 2 1 /2 0.4 $4.60 Order one foot plate for each OAP upright and two foot plates back-to-back for each HBP upright, as shown. When seismic foot is used, bottom shelf is 6 9 /32" above floor. 60 Standard Colors Items with this symbol are

61 Q-Line Shelving: Components SLIDING DIVIDERS CAT. NO. H WT. PRICE 12 Deep SD $10.00 SD / SD Deep SD SD / SD Deep SD SD / SD FRONT BASE STRIPS FBS /2 1 7 /8 1.2 $9.10 FBS /2 1 7 / FBS /2 1 7 / For Offset Angle Post MB / / $4.30 For Heavy Duty Beaded Post BMB-3 15 / / Includes hardware. MEZZANINE BRACKETS MB-3 BMB-3 CAT. NO. DESCRIPTION WT. PRICE AG-6 Corner Gusset (ea.) 0.1 $3.50 BG-6 Beaded T Gusset (pr.) Can be used in place of sway braces. Corner Gusset Beaded T Gussets (1 pair) GUSSETS SPLICE PLATES For Offset Angle Post SPOA-4 27 / / $4.00 For Heavy Duty Beaded Post SPBT-5 5 /8 2 7 / Includes hardware. SHELVING SPOA-4 SPBT-5 Shelf Boxes BX / / $16.80 BX / / BX / / BX / / BX / / BX / / Shelf Box Dividers* BXD /16 1 / / BXD / / BXD /8 1 / / Shelf Box Guides** BXG /8 3 /4 2 3 / BXG /8 3 /4 2 3 / *Dividers are galvanized, not painted. **Guides are priced per pair. Includes hardware. SHELF BOXES Standard Colors (Unless Otherwise Specified) Items with these symbols are 61

62 END SWAY BRACES (Sold in Pairs) Sway Braces & Hinged Doors Includes hardware. CAT. NO. Shelf Depth WT. PRICE ESB to $9.50 ESB to NOTE: Use two pair for uprights and three pair for uprights 138 and higher. REAR SWAY BRACES (Sold in Pairs) Includes hardware. CAT. NO. Unit Length WT. PRICE RSBU 36 to $11.70 RSB NOTE: Use two pair for uprights and three pair for uprights 138 and higher. HINGED DOOR SHELVING UNITS HDS-8712RH 36 12* $ HDS-8718RH 36 18* HDS-8724RH 36 24* *Unit depth does not include 1 1 /4 depth of door frame or 1 /2 depth of handle. Hinged doors come standard with one recessed handle. SHELVING HINGED DOORS Full-Height Hinged Doors HD-3687RH /4* $ Half-Height Hinged Doors HD-3637RH /4* * Depth does not include 1 /2" depth of handle. Hinged doors come standard with one recessed handle. Assembly Required. 62 Standard Colors (Unless Otherwise Specified) Items with this symbol are

63 Slotted Angle & Packing Table SLOTTED ANGLE CAT. NO. GAUGE LENGTH WT. PRICE SA-1410P $38.00 SA-1412P Packed 5 per bundle. Includes 38 nuts and bolts. PACKING TABLES Packing Table with Steel Top APT-3072S / $1, APT-3672S / , Packing Table with Wood Top APT-3072W / , APT-3672W / , Available in Grey only. PACKING TABLE ACCESSORIES Power Rail PTP / /2 1 3 /4 12 $ Bin Rail TWBR / /8 4 3 / Task Light TWCTL / / Task Light Bracket Kit* TWLB /2 3 1 / *Task Light Bracket Kit required for Task Light. PTP-60 TWBR-60 (Bins not included) TWCTL-48 Task light has two 32-watt lamps. SHELVING SHOP EQUIPMENT Available in Grey only. Standard Colors (Unless Otherwise Specified) TWLB-60 Light Bracket Kit is Black only. 63

64 Flared & Adjustable Leg Workbenches SHOP EQUIPMENT 64 FLARED LEG WORKBENCHES Steel Top with Flared Legs ADJUSTABLE LEG WORKBENCHES Standard Colors Butcher Block Top with Flared Legs Steel Top with Adjustable Legs Butcher Block Top with Adjustable Legs Plastic Top with Flared Legs Compressed Top with Flared Legs Plastic Top with Adjustable Legs Compressed Top with Adjustable Legs CAT. NO. LOAD CAP. W D H WT. PRICE Steel Top WB S 4, /2 91 $ WB S 2, / WB S 1, / WB S* 4, / WB S 2, / WB S 1, / WB S* 4, / Plastic Top WB P 1, / WB P / WB P / WB P* 1, / WB P / WB P / WB P* 1, / Butcher Block Top WB W 4, / WB W 3, / WB W 3, / WB W*4, / , WB W 3, / WB W 3, / WB W*4, / , Compressed Wood Top WB C 2, / WB C 1, / WB C 1, / WB C* 2, / WB C 1, / WB C 1, / WB C* 2, / *96 w workbenches have 3 sets of legs. CAT. NO. LOAD CAP. W D H WT. PRICE Steel Top WBA S 4, / /8 98 $ WBA S 2, / / WBA S 1, / / WBA S* 4, / / WBA S 2, / / WBA S 1, / / WBA S* 4, / / Plastic Top WBA P 1, / / WBA P / / WBA P / / WBA P* 1, / / WBA P / / WBA P / / WBA P* 1, / / Butcher Block Top WBA W 4, / / WBA W 3, / / WBA W 3, / / WBA W*4, / / , WBA W 3, / / WBA W 3, / / WBA W*4, / / , Compressed Wood Top WBA C 2, / / WBA C 1, / / WBA C 1, / / WBA C* 2, / / WBA C 1, / / WBA C 1, / / WBA C* 2, / / *96 w workbenches have 3 sets of legs. Items with this symbol are

65 Electronic Workbenches ELECTRONIC WORKBENCHES EB S Solid Steel Top Electronic Workbench EB M Hard Wood Top Electronic Workbench With Electronic Riser - Assembly required. CAT. NO. TOP MATERIAL W D H LOAD CAP.* WT. PRICE Electronic Workbench with Stringer and Outlet Panel EB S Solid Steel /2 1, $ EB M Hard Wood /4 2, EB M Hard Wood /4 2, , EB P Plastic Laminate / EB P Plastic Laminate / EB C Compressed Wood /4 1, EB C Compressed Wood /4 1, Electronic Workbench with Stringer, Outlet Panel and Electronic Riser EB S Solid Steel /2 1, EB M Hard Wood /4 2, , EB M Hard Wood /4 2, , EB P Plastic Laminate / EB P Plastic Laminate / EB C Compressed Wood /4 1, EB C Compressed Wood /4 1, *Load capacity is for top only. This is not the represented load capacity for riser. Includes top, panel legs and electronic outlet panel. Electronic wiring kit is not included with outlet panel. ELECTRONIC MODULAR WORKBENCHES EMB S Solid Steel Top Electronic Modular Workbench EMB M Hard Wood Top Electronic Modular Workbench - Assembly required. CAT. NO. TOP MATERIAL W D H LOAD CAP. WT. PRICE EMB S* Solid Steel w/ 2 Drawer Units /2 1, $1, EMB M* Hard Wood w/ 2 Drawer Units /4 2, , EMB P* Plastic Laminate w/ 2 Drawer Units / , EMB C* Compressed Wood w/ 2 Drawer Units /4 1, , EMB S** Solid Steel w/ 1 Drawer & Cabinet /2 1, , EMB M* Hard Wood w/ 1 Drawer & Cabinet /4 2, , EMB P** Plastic Laminate w/ 1 Drawer & Cabinet / , EMB C** Compressed Wood w/ 1 Drawer & Cabinet /4 1, , SHOP EQUIPMENT Load capacity is for top only. * Includes top, two modular drawer units and electric outlet panel. Electric wiring kit is not included with outlet panel. ** Includes top, one modular drawer unit, one modular cabinet unit and electric outlet panel. Electric wiring kit is not included with outlet panel. Standard Colors Items with these symbols are 65

66 Workbench Tops STEEL TOPS *96 w tops require three legs. Durable 12 gauge steel work surface reinforced with 14 gauge mounting brackets. Includes two mounting brackets (enough to mount one workbench drawer or two modular cabinets). Stringer required for workbenches with legs & no pedestals. CAT. NO. LOAD CAP. W D H WT. PRICE With Stringer T , /2 62 $ T , / T , / T-3096* 4, / T , / T , / T , / T-3696* 4, / Without Stringer G-T , / G-T , / G-T , / G-T-3096* 4, / G-T , / G-T , / G-T , / G-T-3696* 4, / STEEL TOPS WITH HARD BOARD 1 /8" hardboard helps to deaden sound of items placed or used on work surface and protects durable 12 gauge steel work surface from scratches. Reinforced with 14 gauge mounting brackets. Includes two mounting brackets (enough to mount one workbench drawer or two modular cabinets). CAT. NO. LOAD CAP. W D H WT. PRICE With Stringer THB , /2 78 $ THB , / THB , / Without Stringer G-THB , / G-THB , / G-THB , / Stringer required for workbenches with legs & no pedestals. HARDWOOD TOPS SHOP EQUIPMENT *96 w tops require three legs. Features assorted hardwoods in a butcher-block construction to resist warp. Stringer required for workbenches with legs & no pedestals. CAT. NO. LOAD CAP. W D H WT. PRICE With Stringer MT , /4 95 $ MT , / MT-3096* 4, / MT , / MT , / MT-3696* 4, / , Without Stringer G-MT , / G-MT , / G-MT-3096* 4, / G-MT , / G-MT , / G-MT-3696* 4, / , Available in Natural only. 66 Standard Colors (Unless Otherwise Specified) Items with these symbols are (UNF)

67 Workbench Tops PLASTIC LAMINATE TOPS CAT. NO. LOAD CAP. W D H WT. PRICE With Stringer PT /2 94 $ PT / PT-3096* 1, / PT / PT / PT-3696* 1, / Without Stringer G-PT / G-PT / G-PT-3096* 1, / G-PT / G-PT / G-PT-3696* 1, / Available in White only. CAT. NO. LOAD CAP. W D H WT. PRICE With Stringer CT , /4 123 $ CT , / CT-3096* 2, / CT , / CT , / CT-3696* 2, / Without Stringer G-CT , / G-CT , / G-CT-3096* 2, / G-CT , / G-CT , / G-CT-3696* 2, / Available in Natural only. *96 w tops require three legs. High pressure laminate top & edges; particleboard core. Non-conductive surface is ideal for electronics. Stringer required for workbenches with legs & no pedestals. COMPRESSED WOOD TOPS *96 w tops require three legs. Tempered hardboard top and bottom surface laminated to compressed wood core. Banded on all sides with hard maple. Stringer required for workbenches with legs & no pedestals. STRINGERS WBS $27.00 WBS WBS WBS Ties workbench legs together for added stability. Stiffening beads provide added strength. MOUNTING CHANNELS WBMC / / $22.00 WBMC / / Mounts stackable drawer or modular cabinets on steel tops. Two mounting channels are included with steel top; order additional channels for unique configurations only. MOUNTING ANGLES SHOP EQUIPMENT WBLB / / $17.90 Mounts stackable drawer or modular cabinets on electronic workbench. One set required per hanging item. Standard Colors (Unless Otherwise Specified) Items with these symbols are (L002) (UNF) 67

68 Workbench Accessories FLARED LEGS Priced per leg. Complete with two easily removable plastic outlet inserts. Feet prepunched for floor anchoring. 24 deep legs available in quantity; consult factory for pricing. CAT. NO. LOAD CAP.* W D H WT. PRICE L , / $72.00 L , / L , / L , / *Load Capacity represents total per pair. ADJUSTABLE LEGS Priced per leg. Complete with two easily removable plastic outlet inserts. Feet prepunched for floor anchoring. CAT. NO. LOAD CAP.* W D H** WT. PRICE AL , / / $66.00 AL , / / AL , / / AL , / / *Load Capacity represents total per pair. **Adjustable on 1 1 /2" centers. PANEL LEGS Priced per pair. Prepunched holes for easy attachment. CAT. NO. LOAD CAP.* W D H WT. PRICE LP , $ *Load Capacity represents total per pair. CASTER KITS Swivel CAT. NO. LOAD CAP. DESCRIPTION WT. PRICE Casters attach to 30" or 36" deep For 48 W - 72 W Workbenches flared or adjustable legs to provide WBCK ,000 Two fixed, Two swivel 16 $98.00 mobility for your workbench. Kit WBCK-3036S 1,000 Four swivel includes mounting brackets and For 96 W Workbenches Fixed four casters. WBCK ,000 Two fixed, Four swivel NOTE: Lower shelf or two stringers required for stability when using caster kits. SHOP EQUIPMENT LOWER SHELVES Lower Shelf Full Depth Lower Shelf CAT. NO. LOAD CAP.* W D WT. PRICE Shelf For Flared Leg or Adjustable Leg Workbenches S $59.00 S S S Full Depth Shelf For Flared Leg Workbenches FS FS FS FS-96** Full Depth Shelf For 30 D Adjustable Leg Workbenches FS FS Full Depth Shelf For 36 D Adjustable Leg Workbenches FS FS FS FS-3696** *All loads must be evenly distributed. **96"w are two pieces. 68 Standard Colors Items with this symbol are

69 Workbench Accessories NOTE: Load capacities for Modular Storage Cabinets and Modular Drawer Cabinets represent units when being used to support a workbench with weight evenly distributed on top. Drawer load capacity is 70 lbs. MODULAR CABINETS CAT. NO. LOAD CAP. W D H WT. PRICE Modular Cabinets MS , $ MD , MD , MD , Caster Kit For Modular Cabinets CB , / Extra Drawer Divider (Galvanized Only) WBDD / / Optional Extra Shelf for MS-1524 MBS / Storage Cabinet comes standard with locking recessed handle. One adjustable shelf included. Drawer unit comes standard with keylock which locks all drawers simultaneously. Includes one divider per drawer. Order tops without stringers with the modular units. CAT. NO. LOAD CAP. W D H WT. PRICE WBHC $ MD-1524 MS-1524 CB-1524 Cabinet comes standard with locking recessed handle.can be used with stackable drawer. Bolt-in center shelf can be flipped so cabinet door can open in either direction. MD MD National Motor Freight Class: Cabinets, 100; Caster, 70 HANGING CABINET National Motor Freight Class: 100 When mounting to steel top, use one set of Mounting Channels (included with top); when mounting to electronic workbench, use one set of Mounting Angles. Mounts to wood tops directly. CAT. NO. LOAD CAP. W D H WT. PRICE Stackable Drawer WBD /4 18 $ WBD-1-MGY* / Stackable Drawer (With Installed Cam Lock) WBD-1L-MGY* / CL-1 Cam Lock (Field Installable) WBDD-12 Extra Divider (Galvanized Only) 12 3 / / * Grey Only. CAT. NO. LOAD CAP. W D H WT. PRICE WBD $ Includes left and right mounting channels, rear brace and drawer. Drawer includes cam lock. CAT. NO. LOAD CAP. W D H WT. PRICE SM / $ gauge steel shelf. SB $52.00 SB SB SB SB SB SB SB Includes padlock hasp, one drawer divider, one removable tray, and knockout for optional key lock. When mounting to steel top, use one set of Mounting Channels (included with top); when mounting to electronic workbench, use one set of Mounting Angles. Mounts to wood tops directly. STACKABLE DRAWERS 25 WIDE HANGING DRAWER When mounting to steel top, use one set of Mounting Channels (included with top); when mounting to electronic workbench, use one set of Mounting Angles (WBLB-30). Mounts to wood tops directly. For use with workbenches with modular units with 72 W tops. MODULAR BENCH LOWER SHELF Adds 3 to overall workbench height. SIDE & BACK RAIL KITS SHOP EQUIPMENT Standard Colors (Unless Otherwise Specified) Items with these symbols are 69

70 Workbench Accessories WORKBENCH RISER WITH END SUPPORTS Risers have a 1 1 /2" tall backstop. Riser will add 12" overall height to the workbench. May be double stacked. ELECTRIC RISER WITH END SUPPORTS Risers have a 1 1 /2" tall backstop. Riser will add 12" or 18" overall height to the workbench. Includes knockouts for four duplex receptacle outlets. Optional wiring kit may be ordered on page 11 or prewired below. May be double stacked. CAT. NO. LOAD CAP. W D H WT. PRICE R / $82.00 R / R / R-1096* 1, / R / R / *96 w risers use a center upright. CAT. NO. LOAD CAP. W D H WT. PRICE RE / $ RE / RE RE RE RE RE PREWIRED ELECTRIC RISER WITH END SUPPORTS Risers have a 1 1 /2" tall backstop. Riser will add 12" or 18" overall height to the workbench. May be double stacked. CAT. NO. LOAD CAP. W D H WT. PRICE REI-1060-WK / $ REI-1072-WK / REI-1560-WK REI-1572-WK REI WK REI WK REI WK DOUBLE DECKER CENTER RISER WITH END SUPPORTS CAT. NO. LOAD CAP. W D H WT. PRICE R / $ R / Risers have no back flanges. Unit may be mounted in center of top for double entry. ELECTRIC OUTLET PANEL FOR BENCHES WITH PANEL LEGS SHOP EQUIPMENT ELECTRIC OUTLET PANEL FOR BENCHES WITH TWO MODULAR UNITS WOP / / $ Provides mounting plate for four duplex outlets on 72 panel leg workbenches. Optional wiring kit is available on page 71. Without Wiring Kit WOP /8 4 3 / $64.00 Wiring Kit Installed WOPI-42-WK /8 4 3 / Provides mounting plate for four duplex outlets on panel leg workbenches. Optional wiring kit is available on page Standard Colors (Unless Otherwise Specified) Items with this symbol are

71 Workbench Accessories WIRING KIT CAT. NO. WT. PRICE WK $ Pre-wired for quick installation. Comes complete with four duplex receptacles, on/off switch with pilot light, 8 foot grounded cord and plug, 15 amp, 115 volt service and circuit breaker. Use with electronic riser, outlet panels, or electronic workbench. FOREMAN S DESKS WALL MOUNTED OPEN STYLE CLOSED STYLE LOAD CAPACITY CAT. NO. W D H TOP DRAWER SHELF WT. PRICE SR-57 Open Style 34 1 / $ SR-58 Closed Style 34 1 / SR-59 Wall Mounted 34 1 / /2* *Note: If including mounting bracket in height calculations, add 16 1 /4 to height listed above. Combines a convenient, sturdy writing surface with compartmentalized riser for storing writing utensils, forms and papers. Drawer comes standard with lock and two keys. Shipped partially assembled. SHOP EQUIPMENT Grey only. Standard Colors Items with these symbols are (UNF) 71

72 Workbench Accessories CANTILEVERED ACCESSORY SYSTEM Upright Frame Cantilevered Shelf With Dividers Under-Shelf Task Light Sloped Shelf Bin Rails (bins not included) The Cantilevered Accessory System provides a variety of convenient storage options for your workstation. Start with upright frames, then add accessories such as shelves with dividers, sloped shelves, an overhead light, or a bin rail for adding third-party bins for small parts storage. UPRIGHT FRAMES CANTILEVERED SHELF Accesories attach to uprights without tools. CAT. NO. DESCRIPTION W D H WT. PRICE WBRU-24A Sold as a Pair / $83.00 WBRU-42A Sold as a Pair / NOTE: Cantilever system requires 72 or wider top. Upright frames attach to the rear edge of the work surface to provide a substantial structure from which to support storage shelves, bin rails, sloped shelves and lighting. Attaches with four bolts per side (drilling required to attach). Both sizes of uprights may be attached directly to the Tennsco steel or wood tops. TWBS-6012A /2 21 $81.00 May be quickly and easily repositioned. Four adjustable dividers are furnished with each shelf. SLOPED SHELF TWSS-6012A /4 19 $59.00 May be quickly and easily repositioned. Includes a front lip to keep items from rolling off the shelf. SHOP EQUIPMENT BIN RAIL CANTILEVER TASK LIGHTING Task Light Task Light with Optional Light Bracket Kit TWBR /8 4 3 /16 7 $ Bin Rails accommodate a variety of commercially available plastic and steel parts bins. Easily adjustable up or down on the upright frame. Task Light TWCTL / /32 14 $ Light Bracket Kit TWLB /2 3 1 / The cantilever task light provides overhead lighting for your work area. Unit contains two 32-watt lamps and is prewired with an 8 power cord and power switch. Use bracket kit for mounting onto cantilever uprights. Mounting bracket allows light to adjust back and forth in 1 1 /2 increments, or an angle if mounted on top. Available in black only. Standard Colors (Unless Otherwise Specified) 72

73 Mobile Workbenches & Service Carts MOBILE WORKBENCHES MB MB-2530-BB MB MB MB MB-2530-C MB CAT. NO. LOAD CAP. W D H WT. PRICE Mobile Workbenches MB , /4 182 $1, MB , / , MB-2530-BB 1, , MB-2530-C 1, MB , , MB , , MB , , MB , , MB , , Extra Shelf For Cabinet of MB or MB MBS / Extra Shelf For Left Side of MB MBS / Electric Riser (Fits only 48 wide units) RE-1045WK / Push Handle Power Strip MHE / National Motor Freight Class: 100 MB RE-1045WK MB MHE-25 SERVICE CARTS CAT. NO. LOAD CAP. W D H WT. PRICE 16 Wide Service Cart SC * $ Optional Center Tray For 16 Wide Service Cart ST / Wide Service Cart SC * Optional Center Tray For 24 Wide Service Cart ST / *Load capacity is 150 lbs. per tray. Two-shelf service cart with optional center tray. Trays have 3 /8 lip and can be reversed to use as either a flat work surface or a storage compartment. Hard rubber casters (two swivel and two stationary). Shipped unassembled. Available in Grey only. SHOP EQUIPMENT Standard Colors (Unless Otherwise Specified) Items with these symbols are 73

74 TECHNICAL WORKSTATIONS WITH FIXED LEGS Technical Workstations TW NE TW S Standard Work Surface TW N $ TW N TW N TW N TW N TW N TW N , TW N , Standard Work Surface With Power Rail TW NE , TW NE , TW NE , TW NE , TW NE , TW NE , TW NE , TW NE , Standard Work Surface: A plastic-laminate top, trimmed with PVC edging. Static Control Work Surface: A plastic-laminate top, trimmed with oak edging. Rated at ohms per sq. centimeter. Grounding cables not provided. TECHNICAL WORKSTATIONS WITH ADJUSTABLE LEGS Static Control Work Surface TW S $1, TW S , TW S , TW S , TW S , TW S , TW S , TW S , Static Control Work Surface With Power Rail TW SE , TW SE , TW SE , TW SE , TW SE , TW SE , TW SE , TW SE , TW NA TW SEA SHOP EQUIPMENT Standard Work Surface Static Control Work Surface TW NA $ TW SA $1, TW NA TW SA , TW NA , TW SA , TW NA , TW SA , TW NA , TW SA , TW NA , TW SA , TW NA , TW SA , TW NA , TW SA , Standard Work Surface With Power Rail Static Control Work Surface With Power Rail TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , TW NEA , TW SEA , Standard Work Surface: A plastic-laminate top, trimmed with PVC edging. Static Control Work Surface: A plastic-laminate top, trimmed with oak edging. Rated at ohms per sq. centimeter. Grounding cables not provided. Standard Colors 74 Accent Blue (ABL) TOP COLOR: Almond (L004)

75 Technical Workstation Accessories Standard Work Surface INSTRUMENT SHELVES Standard Work Surface TWI-60-N $ TWI-72-N Standard Work Surface With Power Rail Standard Work Surface With Power Rail TWI-60-NE $ TWI-72-NE Static Control Work Surface Static Control Work Surface TWI-60-S $ TWI-72-S Static Control Work Surface With Power Rail Static Control Work Surface With Power Rail TWI-60-SE $ TWI-72-SE HANGING DRAWER UNITS CAT. NO. DESCRIPTION W D H WT. PRICE 1 Drawer Units PED Fits 30 Workstations $ PED Fits 36 Workstations Drawer Units PED Fits 30 Workstations / PED Fits 36 Workstations / Drawer Units PED Fits 30 Workstations / PED Fits 36 Workstations / PED PED SHOP EQUIPMENT PED Standard Colors Accent Blue (ABL) TOP COLOR: Almond (L004) 75

76 Technical Workstation Accessories WORKSTATION TOPS Static Control Almond Color Only. Standard Standard Work Surface TWST $ TWST TWST TWST Static Control Work Surface TWDT TWDT TWDT TWDT TOP MOUNTED POWER RAILS TWP /2 1 3 /4 12 $ TWP /2 1 3 / WORKSTATION GROUNDING KIT TWG $34.00 TASK LIGHT FOR INSTRUMENT SHELVES SHOP EQUIPMENT CAT. NO. DESCRIPTION W D H WT. PRICE TWCTL-48 Task Light 50 5 / /32 14 $ Task light has two 32-watt lamps. Task light mounts underneath instrument shelves. Standard Colors 76 Accent Blue (ABL) TOP COLOR: Almond (L004)

77 Technical Workstation Accessories UPRIGHT FRAMES TWRU-24A / $60.00 TWRU-42A / Sold as pairs. NOTE: Benchtops less than 60" wide can not accommodate the Cantilever Accessory System. CANTILEVERED SHELF TWBS-6012A /4 21 $81.00 Includes four dividers, adjustable on 1 centers. SLOPED SHELF TWSS-6015A / $73.00 SHOP EQUIPMENT Standard Colors Accent Blue (ABL) 77

78 Technical Workstation Accessories BIN RAIL Plastic Bins Not Included TWBR /8 4 3 /16 7 $ CANOPY TOP Canopy Top TWCT / $52.00 (Above) Canopy Top mounted on upright frames (sold separately). CANTILEVER TASK LIGHTING SHOP EQUIPMENT Task Light CAT. NO. DESCRIPTION W D H WT. PRICE TWCTL-48 Task Light 50 5 / /32 14 $ TWLB-60 Light Bracket Kit /2 3 1 / Task light has two 32-watt lamps. Light Bracket Kit is Black only. Task Light with Light Bracket Kit Standard Colors 78 Accent Blue (ABL)

79 L&T SHELVING SYSTEM Tennsco L&T systems use a unique interlock design to combine strength and rigidity for extra functional flexibility and assembly ease. It snaps together in minutes for quick installation and reconfiguration whenever necessary. L UPRIGHT (wwddlo OPEN, p.82) (wwddlc CLOSED, p.83) SHELF SUPPORT (HS-wwgg HEAVY, p.89) (TS-wwgg THIN, p.89) THIN SHELF (T2-wwdd, p.85 or T-wwdd, p.85) BACK (B-wwhh, p.89 or LTBP-wwhh-2, p.89) BIN DIVIDER (LTBDddhh, p.92) FILE DIVIDER (FDP-ddhh or FD-ddhh, p.90) BIN FRONT (BF-ww, p.92) HEAVY PUNCHED SHELF (HP-wwdd, p.88) REFERENCE SHELF (RSMB-dd, p.89) HEAVY SHELF (H-wwdd, p.88) PLASTIC FOOT (LTPF-1, LTNF-L, p. 92) or LEVELING FOOT (LPLI-S, LPLI-L, p.93) T UPRIGHT (wwddto OPEN, p.82) (wwddtc CLOSED, p.83) L&T shelving offers a vast array of shelf accessories which can be easily added to any L&T unit. For L&T Colors click here OR call customer service at: (866) SLOTTED SHELF (HX-wwdd X-RAY SLOTTED, p.88) (TQ2-wwdd THIN SLOTTED. p.86) (TQ-wwdd THIN SLOTTED. p.86) L&T SHELVING & DRAWERS 79

80 8 SHELVES, 7 OPENINGS Includes: STARTER UNITS Uprights (Two Closed "L") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 L&T Preconfigured Units - 76 High Includes: Height to top of bottom shelf: 3"; shelf placed 10 1/2"on center with 9 3/4" vertical filing space/opening. Includes 1 reinforcement per shelf, except top shelf. *Includes 2 reinforcements per shelf, except top shelf. ADDER UNITS Upright (One Open "T") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 CAT. NO. DIV/OPENING W D H WT. PRICE CAT. NO. DIV/OPENING W D H WT. PRICE STARTER UNITS ADDER UNITS Single Entry Single Entry LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / Double Entry Double Entry LCT / TOT / LCT * / TOT * / LCT / TOT / LCT * / TOT * / LCT * / TOT * / LCT * / , TOT * / LCT * / , TOT * / LCT * / , TOT * / , L&T SHELVING & DRAWERS 80 7 SHELVES, 6 OPENINGS Includes: STARTER UNITS Uprights (Two Closed "L") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 Includes: Includes 1 reinforcement per shelf, except top shelf. *Includes 2 reinforcements per shelf, except top shelf. ADDER UNITS Upright (One Open "T") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustbale dividers Front base(s) Optional back available on page 90 Height to top of bottom shelf: 4 1/2"; shelf placed 12" on center with 11 1/4" vertical filing space/opening. CAT. NO. DIV/OPENING W D H WT. PRICE CAT. NO. DIV/OPENING W D H WT. PRICE STARTER UNITS ADDER UNITS Single Entry Single Entry LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / LCT / TOT / Double Entry Double Entry LCT / TOT / LCT * / TOT * / LCT / TOT / LCT * / TOT * / LCT * / TOT * / LCT * / TOT * / LCT * / TOT * / LCT * / , TOT * / For L&T Colors click here OR call customer service at: (866) Mobile Ready Units - Any unit can be converted by substituting an M for the final dash in the catlog number. Example: LCT becomes LCT M6. Pricing is identical; wegiht may vary slightly

81 L&T Preconfigured Units - 88 High Includes: STARTER UNITS Uprights (Two Closed "L") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 CAT. NO. DIV/OPENING W D H WT. PRICE STARTER UNITS Single Entry LCT / LCT / LCT / LCT / LCT / LCT / LCT / LCT / Double Entry LCT / LCT * / , LCT / LCT * / , LCT * / , LCT * / , LCT * / , LCT * / , Includes: Includes 1 reinforcement per shelf, except top shelf. *Includes 2 reinforcements per shelf, except top shelf. ADDER UNITS Upright (One Open "T") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 Height to top of bottom shelf: 4 1/2"; shelf placed 10 1/2"on center with 9 3/4" vertical filing space/opening. 8 SHELVES, 7 OPENINGS CAT. NO. DIV/OPENING W D H WT. PRICE ADDER UNITS Single Entry TOT / TOT / TOT / TOT / TOT / TOT / TOT / TOT / Double Entry TOT / TOT * / TOT / TOT * / TOT * / TOT * / , TOT * / , TOT * / , Includes: STARTER UNITS Uprights (Two Closed "L") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 CAT. NO. DIV/OPENING W D H WT. PRICE STARTER UNITS Single Entry LCT / LCT / LCT / LCT / LCT / LCT / LCT / LCT / Double Entry LCT / LCT * / LCT / LCT * / LCT * / LCT * / , LCT * / , LCT * / , Includes: Includes 1 reinforcement per shelf, except top shelf. *Includes 2 reinforcements per shelf, except top shelf. For L&T Colors click here OR call customer service at: (866) ADDER UNITS Upright (One Open "T") Slotted steel shelves (22 gauge) Plain top shelf (22 gauge) Shelf supports Reinforcements (where noted) Backstops or centerstops Adjustable dividers Front base(s) Optional back available on page 90 Height to top of bottom shelf: 4 1/2"; shelf placed 12" on center with 11 1/4" vertical filing space/opening. 7 SHELVES, 6 OPENINGS CAT. NO. DIV/OPENING W D H WT. PRICE ADDER UNITS Single Entry TOT / TOT / TOT / TOT / TOT / TOT / TOT / TOT / Double Entry TOT / TOT * / TOT / TOT * / TOT * / TOT * / TOT * / TOT * / , Mobile Ready Units - Any unit can be converted by substituting an M for the final dash in the catlog number. Example: LCT becomes LCT M7. Pricing is identical; wegiht may vary slightly L&T SHELVING & DRAWERS 81

82 Open Uprights OPEN UPRIGHTS All open "L" uprights are 1 1 /8" wide. Top Bottom USE FOR ROW ENDS USE FOR INTERMEDIATE POSTS All open "T" uprights CAT. NO. PCS/CTN D H WT. PRICE are 2" wide. CAT. NO. PCS/CTN D H WT. PRICE 1240LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO /4 Top LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / TO / LO / Bottom 3697TO / L&T SHELVING & DRAWERS 82 For L&T Colors click here OR call customer service at: (866) Custom heights and/or custom punch spacing on uprights are also available. Call factory for pricing. Items with this symbol are

83 Closed Uprights USE FOR ROW ENDS USE FOR INTERMEDIATE POSTS CAT. NO. PCS/CTN D H WT. PRICE All closed "L" uprights CAT. NO. PCS/CTN D H WT. PRICE 1240LC / are 1 1 /8" wide. 1240TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / Top 2688TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / Bottom 1597TC / LC / TC / LC / TC / LC / TC / LC / TC / LC / TC LC Custom heights and/or / / TC LC custom punch spacing / / TC LC on uprights are also / / TC LC available. Call factory / / TC LC for pricing. / / TC / For L&T Colors click here OR call customer service at: (866) Items with this symbol are CLOSED UPRIGHTS All closed "T" uprights are 2" wide. Bottom Top Custom heights and/or custom punch spacing on uprights are also available. Call factory for pricing. L&T SHELVING & DRAWERS 83

84 Double Wall (Library) Uprights DOUBLE WALL UPRIGHTS FOR STARTER UNITS FOR ADDER UNITS Top Top USE L UPRIGHTS FOR ROW ENDS USE T UPRIGHTS AS INTERMEDIATE POSTS Top View Profile Single Entry Bottom Top View Profile Single Entry Bottom Top View Profile Double Entry Top View Profile Double Entry L&T SHELVING & DRAWERS 84 CAT. NO. PCS/CTN W D H WT. PRICE CAT. NO. PCS/CTN W D H WT. PRICE "L" UPRIGHTS "T" UPRIGHTS 1240LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / LL / / LT / / For L&T Colors click here OR call customer service at: (866) Custom heights available. Call factory for pricing.

85 Thin Profile Shelves (No Slots) THIN PROFILE SHELVES - 22 GAUGE LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / For use with all uprights except double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and on using TS-wwgg shelf supports, with weight evenly distributed. Shelves punched for optional center dividers (CD-ww). If using SHS supports, HR-dd reinforcements are required. *NOTE: Load capacities do not apply to mobile units. LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / T / For L&T Colors click here OR call customer service at: (866) THIN PROFILE SHELVES - 18 GAUGE For use with all uprights except double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and on using TS-wwgg shelf supports, with weight evenly distributed.shelves punched for optional center dividers (CD-ww). If using SHS supports, HR-dd reinforcements are required. *NOTE: Load capacities do not apply to mobile units. Items with this symbol are L&T SHELVING & DRAWERS 85

86 THIN PROFILE SLOTTED SHELVES - 22 GAUGE Thin Profile Slotted Shelves LOAD Recommended PCS/ SINGLE ENTRY CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE SINGLE ENTRY TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / LOAD Recommended PCS/ DOUBLE ENTRY CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE DOUBLE ENTRY TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / For use with all uprights except double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and using TS-wwgg shelf supports, with weight evenly distributed. If using SHS supports, HR-dd reinforcements are required. Slotted on 2" centers for optional adjustable dividers. *NOTE: Load capacities do not apply to mobile units. THIN PROFILE SLOTTED SHELVES - 18 GAUGE SINGLE ENTRY DOUBLE ENTRY L&T SHELVING & DRAWERS 86 LOAD Recommended PCS/ CAP.* Reinforcements CTN SINGLE ENTRY TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / TQ / LOAD Recommended PCS/ CAP.* Reinforcements CTN DOUBLE ENTRY TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / TQD / For use with all uprights except double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and using TS-wwgg shelf supports, with weight evenly distributed. If using SHS supports, HR-dd reinforcements are required. Slotted on 2" centers for optional adjustable dividers. *NOTE: Load capacities do not apply to mobile units. For L&T Colors click here OR call customer service at: (866) Items with this symbol are

87 Library Shelves, Library Shelf Top Filler LIBRARY SINGLE ENTRY SLOTTED SHELVES LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE LQ / LQ / LQ / LQ / LQ / LQ / LQ / LQ / LQ / LQ / LQ / For use with double wall (library) uprights only. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and on using TS-wwgg shelf supports, with weight evenly distributed. If using SHS supports, HR-dd reinforcements are required. 18 gauge shelves also available; Call factory for prices, weights and load capacities. *NOTE: Load capacities do not apply to mobile units. LIBRARY DOUBLE ENTRY SLOTTED SHELVES LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE LQD / LQD / LQD / LQD / LQD / LQD / LQD / LQD / LQD / LQD / LQD / For use with double wall (library) uprights only. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and on using TS-wwgg shelf supports, with weight evenly distributed. If using SHS supports, HR-dd reinforcements are required. 18 gauge shelves also available; Call factory for prices, weights and load capacities. *NOTE: Load capacities do not apply to mobile units. LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / L / For L&T Colors click here OR call customer service at: (866) LIBRARY SHELVES For use with double wall (library) uprights only. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of TR-dd reinforcements and on using TS-wwgg shelf supports, with weight evenly distributed. If using SHS supports, HR-dd reinforcements are required. 18 gauge shelves also available; Call factory for prices, weights and load capacities. *NOTE: Load capacities do not apply to mobile units. L&T SHELVING & DRAWERS 87

88 Heavy, X-Ray and Particleboard Shelves HEAVY SHELVES HEAVY PUNCHED SHELF HEAVY SHELF LOAD Recommended PCS/ CAP.* Reinforcements CTN HEAVY SHELF H , / H , / H / H / H , / H / H , / H / H / H / H / H / H / H / H / H / H / H / May not be used with double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of HR-dd reinforcements and using HS-xx14 shelf supports, with weight evenly distributed. *NOTE: Load capacities do not apply to mobile units. LOAD Recommended PCS/ CAP.* Reinforcements CTN HEAVY PUNCHED SHELF Single Entry HP , / HP , / HP / HP , / HP / HP / HP / HP / HP / Double Entry HPD / HPD , / HPD / HPD / HPD / HPD / HPD / HPD / HPD / May not be used with double wall (library) uprights. For use with bin dividers (LTBD-ddhh). Each shelf requires two shelf supports. Load capacities are based on using the recommended number of HR-dd reinforcements and using HS-ww14 shelf supports, with weight evenly distributed. *NOTE: Load capacities do not apply to mobile units. X-RAY SLOTTED SHELVES May not be used with double wall (library) uprights. Each shelf requires two shelf supports. Load capacities are based on using the recommended number of HR-dd reinforcements and using HS-ww14 shelf supports, with weight evenly distributed. *NOTE: Load capacities do not apply to mobile units. LOAD Recommended PCS/ CAT. NO. CAP.* Reinforcements CTN W D H WT. PRICE Single Entry HX / HX / HX / HX / Double Entry HXD / HXD / HXD / HXD / L&T SHELVING & DRAWERS 88 PARTICLEBOARD SHELVES For oakgrain finish, change "PBL" to PBLS" and add 50% to shelf price. May not be used with double wall (library) uprights. Each shelf requires two HS or PBS shelf supports. Load capacities are based on using HS-ww14 shelf supports and on weight being evenly distributed. *NOTE: Load capacities do not apply to mobile units. For L&T Colors click here OR call customer service at: (866) PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 / PBL / /8 5 /

89 Shelf Supports & Reinforcements, Hang Rods CAT. NO. PCS/CTN W D H WT. PRICE 14 GAUGE TS / TS / TS / CAT. NO. PCS/CTN W D H WT. PRICE 11 GAUGE TS / TS / TS / THIN SHELF SUPPORTS Two required per shelf. CAT. NO. PCS/CTN W D H WT. PRICE TR / / TR / / TR / / TR / / TR / / TR / / CAT. NO. PCS/CTN W D H WT. PRICE 14 GAUGE TSC / TSC / TSC / THIN SHELF REINFORCEMENTS CAT. NO. PCS/CTN W D H WT. PRICE TR / / TR / / TR / / TR / / TR / / TR / / Use with TS-wwgg shelf supports. An economical option for use with single-entry units only. TSC-ww14 shelf supports will not accept shelf reinforcements, and thus should not be used on units with depths greater than 15". Two supports required per shelf. THIN SHELF SUPPORTS (For Single Entry Only) CAT. NO. PCS/CTN W D H WT. PRICE 11 GAUGE HS / HS / HS / CAT. NO. PCS/CTN W D H WT. PRICE 14 GAUGE HS / HS / HS / HS / HEAVY SHELF SUPPORTS Two required per shelf. CAT. NO. PCS/CTN W D H WT. PRICE HR / / HR / / HR / / HR / / HR / / HR / / HEAVY SHELF REINFORCEMENTS CAT. NO. PCS/CTN W D H WT. PRICE HR / / HR / / HR / / Use with HS-wwgg HR / / shelf supports. HR / / CAT. NO. PCS/CTN W D H WT. PRICE SHS / SHS / SHS / SHS / SHS / CAT. NO. PCS/CTN W D H WT. PRICE PBS / PBS / PBS / Two supports required per shelf. Use HR-dd reinforcements for 18" & deeper shelves. Use only with bottom shelf, to permit shelf to fit flush with floor or for attachment to mobile bases. 3 /4" profile gives more clearance than HS supports. Two supports required per shelf. SINGLE RIVET BOTTOM SHELF SUPPORTS PARTICLEBOARD SHELF SUPPORTS Hang rod assemblies require two hanging brackets, one hang bar and four galvanized clips (each sold separately, below) to attach. Provides one hanging position. CAT. NO. PCS/CTN W D H WT. PRICE HANG BAR LTTB /2 11/ LTTB /2 11/ LTTB /2 11/ LTTB /2 11/ HANG BAR CLIPS MC-1P 1 Painted.1.36 For L&T Colors click here OR call customer service at: (866) HRSB LTTB HRSB HANG-ROD COMPONENTS CAT. NO. PCS/CTN W D H WT. PRICE HANGING BRACKETS HRSB / HRSB / HRSB / HRSB / HRSB / Items with this symbol are L&T SHELVING & DRAWERS 89

90 Backs, Reference Shelf, Periodical Shelf BACKS - ONE PIECE Packed up to 5 pieces per carton/crate. Top and bottom stiffeners included. BACKS - TWO PIECES Packed 3 pieces per carton. Top and bottom stiffeners included. 30" WIDE 42" WIDE B / * B / * B / * B / B / * B / B / B / B / B / " WIDE 48" WIDE B / * B / * B / * B / B / * B / B / B / B / B / * Add $30.00 carton charge per carton. Add $60.00 crate charge per crate. 30" WIDE LTBP / LTBP / LTBP / LTBP / LTBP / LTBP / " WIDE LTBP / LTBP / LTBP / LTBP / LTBP / LTBP / " WIDE LTBP / LTBP / LTBP / LTBP / LTBP / LTBP / " WIDE LTBP / LTBP / LTBP / LTBP / LTBP / LTBP / SEISMIC BACKS Packed as ordered. Helps reinforce shelving units in seismic zones. 30" WIDE CFB / CFB / CFB / CFB / " WIDE CFB / CFB / CFB / CFB / " WIDE CFB / CFB / CFB / CFB / " WIDE CFB / CFB / CFB / CFB / REFERENCE SHELF KITS Shelf is 11 7 /8" deep. Reduces filing space by 1". Kit comes with mounting brackets and one shelf. Brackets and shelves packed separately. For double entry units, order extra shelf. CAT. NO. PCS/CTN W D H WT. PRICE CAT. NO. PCS/CTN W D H WT. PRICE Used on 36", 42" or 48" wide units Used on 30" wide units RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / RSMB / " WIDE EXTRA SHELF (FOR DOUBLE ENTRY UNITS) 24" WIDE EXTRA SHELF (FOR DOUBLE ENTRY UNITS) RS /8 5 / RS /8 5 / L&T SHELVING & DRAWERS 90 PERIODICAL SHELVES For L&T Colors click here OR call customer service at: (866) Used for displaying media such as magazines, journals, etc. Items with this symbol are CAT. NO. PCS/CTN W D H WT. PRICE LTPD / LTPD / LTPD / LTPD / For quantities less than 25 pieces, add $300/list setup charge.

91 Door Kits and Dividers LOCKING DOOR KITS (For HIPAA Compliance) CAT. NO. PCS/CTN W D H WT. PRICE HINGED DOOR KIT Fits Single Units LTHD-3676RH / LTHD-4276RH / LTHD-4876RH / LTHD-3688RH / LTHD-4288RH / LTHD-4888RH / EXTENDED HINGED DOOR KIT* Fits Single Units** LTHD-3676RHD / LTHD-4276RHD / LTHD-4876RHD / LTHD-3688RHD / LTHD-4288RHD / LTHD-4888RHD / *Provides additional clearance for filing with end tab file folders. **Extends 2 3 /4" from front of unit: Door frame uses 1 /2" vertical filing space. LTHD-4276RH Hinged Door for Single Units Extends 1 3 /4" from front of unit: door frame uses 1 /2" vertical filing space. All doors come standard with lock, in compliance with Health Insurance Portability and Accountability Act of 1996 (HIPAA) regulations. ADJUSTABLE DIVIDERS CAT. NO. PCS/CTN W D H WT. PRICE ADJUSTABLE FILE DIVIDER (STEEL) FD-0808* FD-1108** FDP ADJUSTABLE X-RAY FILE DIVIDER (STEEL) FD / ADJUSTABLE FILE DIVIDER (PLASTIC) PD FD-1108 *Use FD-0808 with TQ2-xx09, TQD2-xx18, LQ2-XX09 & LQD2-XX18. **Includes Tennsco imprint. PD-1108 COMPRESSION DIVIDERS CAT. NO. PCS/CTN W D H WT. PRICE ADJUSTABLE DIVIDER (COMPRESSION) AD AD AD-0907 Use with CBS-ww or CCS-ww WIRE DIVIDER AND BACKSTOPS CAT. NO. PCS/CTN W D H WT. PRICE SLIDING WIRE DIVIDER TWD WIRE DIVIDER BACKSTOPS WDBS WDBS WDBS For L&T Colors click here OR call customer service at: (866) TWD-1 CHROME PLATED Packed as ordered. Items with this symbol are WDBS-42 Use with TWD-1 (Sliding Wire Dividers) Can only be used with single entry units. L&T SHELVING & DRAWERS 91

92 Back Stops, Center Stops, Nylon Feet BIN DIVIDERS, BACK STOPS AND FRONTS LTBD-1215 BDBS-30 CAT. NO. PCS/CTN W D H WT. PRICE BIN DIVIDER BACK STOP** BDBS BDBS BDBS BDBS BIN FRONT BF BF BF BF *Use with HP-wwdd or HPD-wwdd shelves only. **Use with bin dividers on single entry units only. BF-30 CAT. NO. PCS/CTN W D H WT. PRICE BIN DIVIDER* LTBD LTBD LTBD LTBD LTBD LTBD LTBD LTBD LTBD LTBD LTBD LTBD X-RAY BIN DIVIDER* LTBD ½ LTBD LTBD ½ LTBD SLOTTED AND ADJUSTABLE BACK STOPS SLOTTED BACK STOPS Use with FD-0808, FD-1108, FDP-1108, FD-1612, PD-1108 ADJUSTABLE BACK STOPS (COMPRESSION) Use with AD-0907 OR AD-1107 CAT. NO. PCS/CTN W D H WT. PRICE SLOTTED BACK STOPS BS BS BS BS ADJUSTABLE BACK STOPS (COMPRESSION) CBS / CBS / CBS / SLOTTED CENTER STOPS CAT. NO. PCS/CTN W D H WT. PRICE CAT. NO. PCS/CTN W D H WT. PRICE SLOTTED CENTER STOP* X-RAY SLOTTED CENTER STOP CS XCS CS XCS CS XCS CS XCS * Use with double entry thin slotted shelves only. Use with double entry slotted X-ray shelves only. ADJUSTABLE CENTER STOPS (COMPRESSION) Use with AD-0907 or AD-1107 (Adjustable Dividers) CAT. NO. PCS/CTN W D H WT. PRICE CCS / CCS / CCS / UNSLOTTED CENTER DIVIDERS Use with unslotted shelves to divide shelves into equal halves. Not available for use on 9" deep shelves. CAT. NO. PCS/CTN W D H WT. PRICE CD / CD / CD / CD / NYLON FEET L&T SHELVING & DRAWERS 92 Foot For T Uprights Foot For L Uprights For L&T Colors click here OR call customer service at: (866) Black nylon foot shaped to fit each type of L&T upright. May also be used as an upright top cap. Two required per upright. Items with this symbol are CAT. NO. DESCRIPTION PRICE LTNF-L Fits "L" Uprights 1.40 LTNF-T Fits "T" Uprights 1.40

93 Seismic Center Stop, Misc. Parts SEISMIC FULL HEIGHT CENTER STOPS CAT. NO. PCS/CTN W D H WT. PRICE FOR LETTER AND LEGAL FILING FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS FHCS ½ FHCS CAT. NO. PCS/CTN W D H WT. PRICE FB / FB / FB / FB / CAT. NO. PCS/CTN W D H WT. PRICE LTAT / LTAT / LTAT / CAT. NO. PCS/CTN W D H WT. PRICE FOR X-RAY FILING XFHCS ½ XFHCS XFHCS ½ XFHCS XFHCS ½ XFHCS CAT. NO. PCS/CTN W D H WT. PRICE FB / FB / FB / FB / Use to tie units together across aisle for extra stabilization in tall units. Other lengths available upon request; consult factory for pricing. Used to help reinforce shelving units in seismic zones. For quantities less than 100 pieces, add $500/list setup charge. FRONT BASES Acts as a kickplate and provides a flush, finished appearance. AISLE TIES BSN6 4 5 /8 1 3 / BSN9 4 5 /8 1 3 / Non-skid base included; packed as ordered. BOOK SUPPORTS CAT. NO. DESCRIPTION PRICE LTCP-1 Ties posts back-to-back 1.80 LTPF-1 For protection of carpeting.36 LTPS-1 Shim to help adjust for uneven floor.88 LTWT-1 Attaches post to wall for added security 2.00 LTUC-1 Ties posts back-to-back.86 LTSP-1 Prevents shelf support from slipping.51 LTSI-36 Provides extra stability for seismic standards 8.40 LTUP-1 To touch up scrapes and scratches 9.20 LTSPL-1 Splice for extending existing posts 3.10 SCH-P Holds 3x5" cards for shelf labeling 3.70 LTCP-1 LTSP-1 LTPF-1 LTSI-36 MISCELLANEOUS L&T PARTS LTPS-1 LTWT-1 LTUC-1 LTUP-1 LTSPL-1 SCH-P CAT. NO. DESCRIPTION SIZE PRICE SMALL LEVELER (FOR USE ON CONCRETE/TILE FLOOR) LPLI-S Fits "L" Uprights 1 /4"-20 x 9 /16" 1.40 TPLI-S Fits "T" Uprights 1 /4"-20 x 9 /16" 1.40 LARGE LEVELER (FOR USE ON CARPET) LPLI-L Fits "L" Uprights 1 /4"-20 x 1 3 /8" 2.50 TPLI-L Fits "T" Uprights 1 /4"-20 x 1 3 /8" 1.40 For L&T Colors click here OR call customer service at: (866) For carpeting Items with this symbol are For hard floors LEVELING FEET L&T SHELVING & DRAWERS 93