Figure 7 Figure 8. Figure 9. Figure 10
|
|
|
- Francis Hector Tyler
- 5 years ago
- Views:
Transcription
1 STACKING Disc Springs are often stacked to enhance performance characteristics. By stacking them in parallel, load bearing characteristics are enhanced (Figure 7). when stacked in series, greater deflection or travel is achieved (Figure 8). Figure 7 Figure 8 Combination stacking, in parallel and in series, increases both load bearing and deflection (Figure 9). Disc Springs of varying thicknesses can also be stacked to achieve specific performance objectives (Figure 10). LOAD P 3 P 2 P P 3 =3P 1 P 2 =2P 1 P Figure 9 DEFLECTION DEFLECTION 3 2/ 3 h 51/ 3 h 6h COMPARING DISC SPRING STACK TO COIL SPRING Figure 11 clearly shows how Disc Springs, stacked in series, support the same load as a coiled spring with a substantial reduction in space required. Disc stacks may be designed for extremely high loads where coil springs are not feasible at all. Stack weight: 0.18 lb. Volume: 1.11 in. 3 Page 96 Figure 10 Figure 11 Coil spring weight:0.57 lb. Volume: 4.64 in. 3
2 B B * B B B * B B B M B M B * M B M B M B M B M B M B M B M B M B # B # B # B * # B # B # B # B # B * # B # B # B # B # B # B # B # B # B # B # B # B M B M B M B M B Page 97
3 # B # B * # B # B # B * # B # B # B # B # B # B # B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B # B # B # B # B # B M B M B M B M B M B M B M B M B M B M B M B Page 98
4 M B M B M B M B M B M B M B M B / B / B * 1/ B / B / B * 1/ B / B * 1/ B / B / B / B / B / B / B / B / B / B / B / B M B M B M B M B M B / B / B * 5/ B / B * 5/ B / B / B / B / B / B M B Page 99
5 M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B * 5/ B / B / B / B / B / B / B / B / B / B / B * 3/ B / B / B / B / B Page 100
6 3/ B / B / B / B / B / B / B / B / B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B Page 101
7 7/ B * 7/ B / B / B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B Page 102
8 1/ B / B / B / B / B / B / B / B / B / B / B / B / B / B * 1/ B / B M B M B M B M B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B Page 103
9 5/ B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B / B * 3/ B / B / B / B / B / B / B / B / B Page 104
10 M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B / B / B / B / B / B / B / B / B / B / B / B M B Page 105
11 M B M B M B M B M B B * B B B B B B B B B B B B B B B B B B B B B B B B B M B M B M B M B M B M B / B / B / B M B M B M B Page 106
12 M B M B M B M B M B M B M B M B M B / B / B / B * 1-1/ B / B / B / B / B / B / B M B M B M B M B M B M B M B M B M B M B M B M B M B M B / B / B / B / B / B / B / B / B M B M B Page 107
13 M B M B M B M B M B M B / B / B / B / B / B / B / B / B / B B B B B B B B B B B M B M B M B M B M B M B M B M B M B / B / B / B / B / B / B / B / B / B Page 108
14 2-7/ B / B B B M B M B M B M B M B M B M B M B M B M B M B M B B B B B B B B M B M B M B M B M B M B M B M B M B M B M B Page 109
Voltmeter. for Experiments with the fischertechnik Expansion Kit. Order No
Voltmeter for Experiments with the fischertechnik Expansion Kit Order No. 30083 Fischer Werke 7241 Tumlingen Printed in Germany Ref. No. 33-8/70/5 2. Operation of the Moving Coil Meter If a current flows
Motional emf. as long as the velocity, field, and length are mutually perpendicular.
Motional emf Motional emf is the voltage induced across a conductor moving through a magnetic field. If a metal rod of length L moves at velocity v through a magnetic field B, the motional emf is: ε =
(12) United States Patent (10) Patent No.: US 6,255,755 B1
USOO6255755B1 (12) United States Patent (10) Patent No.: Fei (45) Date of Patent: *Jul. 3, 2001 (54) SINGLE PHASE THREE SPEED MOTOR 3,619,730 11/1971 Broadway et al.... 318/224 R WITH SHARED WINDINGS 3,774,062
Voltmeter and Ammeter Design
EEE3406 Instrumentation & easurements LABOATOY Experiment 2 Name Class Date Class No. arks Voltmeter and Ammeter Design Objectives: After completing this lab, you will be able to measure the full-scale
Let's start our example problems with a D'Arsonval meter movement having a full-scale deflection rating of 1 ma and a coil resistance of 500 Ω:
Voltmeter design As was stated earlier, most meter movements are sensitive devices. Some D'Arsonval movements have full-scale deflection current ratings as little as 50 µa, with an (internal) wire resistance
POWER METER. my2010 (c)
POWER METER ELECTRIC POWER Electric power is the rate at which electric energy is transferred by an electric circuit. The SI unit of power is the watt. When electric current flows in a circuit, it can
Cross-flow Fans. TFD/FFD Series
Cross-flow Fans TFD/FFD Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
MAGNETIC FIELD DUE TO A CURRENT CARRYING CONDUCTOR
Magnetic Field due to a Current through a Straight Conductor 1. A current carrying straight conductor behaves as a magnet. The direction of the magnetic field is given by the Right-Hand Thumb Rule. The
Chapter 22: Electric motors and electromagnetic induction
Chapter 22: Electric motors and electromagnetic induction The motor effect movement from electricity When a current is passed through a wire placed in a magnetic field a force is produced which acts on
21.2 Electromagnetism
In 1820 Hans Oersted discovered how magnetism and electricity are connected. A unit of measure of magnetic field strength, the oersted, is named after him. Electricity and Magnetism How can an electric
INFORMATION BULLETIN (Information code 7.18) Effective Serial Number Range 3710 ICD drills with opener versions (A, B or C).
TSB # 7-2018 January 9, 2018 Page 1 of 5 TO: All Bourgault Dealers ATTN: Service Manager, Parts Manager, Sales Manager INFORMATION BULLETIN (Information code 7.18) Effective Serial Number Range 3710 ICD
Cross-Flow Fans. TF/FF Series
Cross-Flow Fans TF/FF Series Cross flow fans are particularly indicated for uses where, in limited space, high air volume is required with low noise and regular air-flow. The FF-FFD series provides an
BEARINGS. Function of Bearings
BEARINGS Dr. AZ Department of Civil Engineering Brawijaya University Function of Bearings Bridge bearings are used to transfer forces from the superstructure to the substructure, allowing the following
STORAGE SYSTEMS PRACTICAL SOLUTIONS FOR CABLE LAYING CONTENT
STORAGE SYSTEMS PRACTICAL SOLUTIONS FOR CABLE LAYING CONTENT drum winding machines ring coiling machines storage rack systems Storage Systems drum winding machines flexible handling for easy & fast re-coiling
LINK: See the original work on the SB-200 conversion - in complete detail - HERE
http://ac0c.com/main/page_homebrew_sb200_tank_mods.html SB-200 Sleeper Tank Mods SB 200 mods rebuild AC0C_com A Quick Overhaul to the SB-200 Tank Circuit LINK: See the original work on the SB-200 conversion
Power Voltage Transformers for Air Insulated Substations
Power Voltage Transformers for Air Insulated Substations Introduction Trench Power Voltage Transformers (Power VTs) combine the attributes of an inductive voltage transformer with the application of a
Q1. (a) A science technician sets up the apparatus shown below to demonstrate the motor effect. He uses a powerful permanent magnet.
Q. (a) A science technician sets up the apparatus shown below to demonstrate the motor effect. He uses a powerful permanent magnet. The copper roller is placed across the metal rails. When the switch is
WAVE SPRINGS SPECIFICATION FORM
WAVE SPRINGS SPECIFICATION FORM LOAD Equal Deflection and Load LOAD Reduced Operating Height REDUX TM Wave Spring Coil Spring RADIAL WALL FREE HEIGHT WIRE THICKNESS OPERATES IN HOLE DIAMETER CLEARS ROD
DIRECT CURRENT GENERATORS SEPARATELY EXITED, SHUNT AND COMPOUND CONNECTION INTRODUCTION
Islamic University of Gaza Faculty of Engineering Electrical Engineering department Electric Machine Lab Eng. Omar A. Qarmout Eng. Amani S. Abu Reyala Experiment 6 DIRECT CURRENT GENERATORS SEPARATELY
(d) The magnetic field lines, produced around a straight current-carrying conductor, are concentric circles. Their centres lie on the wire.
Page 240»Exercise» Question 1: Which of the following correctly describes the magnetic field near a long straight wire? (a) The field consists of straight lines perpendicular to the wire (b) The field
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING
DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING CONSULTANCY, DESIGN, PRODUCTION, AFTER-SALES SERVICE CONTENT 03 Consultancy, design, production, after-sales service 04 Strip decoiling,
INSTALLATION INSTRUCTIONS HAND OPERATED MODELS 140 AND 140-R BI-PART OPERATION
INSTALLATION INSTRUCTIONS HAND OPERATED MODELS 140 AND 140-R BI-PART OPERATION II. SUSPENDED TRACK (bi-part operation) 1. If the track is to be curved in the field, curve it now. Please refer to ADC Form
Factors to consider when selecting a diverter valve
Factors to consider when selecting a diverter valve Selecting a diverter valve for your pneumatic conveying system can be a tough job, especially when you consider how many diverter valves are on the market.
Design, analysis and mounting implementation of lateral leaf spring in double wishbone suspension system
Design, analysis and mounting implementation of lateral leaf spring in double wishbone suspension system Rahul D. Sawant 1, Gaurav S. Jape 2, Pratap D. Jambhulkar 3 ABSTRACT Suspension system of an All-TerrainVehicle
Buying Your First Crane? Here s What You Need to Know
Buying Your First Crane? Here s What You Need to Know Author Jim Finkle December, 2018 In the image above, the biggest crane is a 15 Ton model that is 24 feet tall with a 35-ft span. The next size crane
TYPE TSC/TLC T SERIES METAL MEMBRANE COUPLINGS
A Stainless Steel Flexible Discs B Overload Collars C Cartridge Transmission Unit D Anti-Fly Feature E Anti-Corrosion Treatment F Hubs with Puller Holes G Externally Wrenched Bolts H Large Shaft Diameters
TRANSLATION (OR LINEAR)
5) Load Bearing Mechanisms Load bearing mechanisms are the structural backbone of any linear / rotary motion system, and are a critical consideration. This section will introduce most of the more common
EXPERIMENT 13 QUALITATIVE STUDY OF INDUCED EMF
220 13-1 I. THEORY EXPERIMENT 13 QUALITATIVE STUDY OF INDUCED EMF Along the extended central axis of a bar magnet, the magnetic field vector B r, on the side nearer the North pole, points away from this
Battery Equalizers. UNCONTROLLED DOCUMENT Updated 6/01/11. Sure Power P/N. Output Current E00 60 amps. Stock No E00 80 amps
Output Current 60 amps 80 amps 100 amps Overview In dual battery (24V systems) it is often desirable to have 12V power available. Often this 12V power is available by tapping the battery stack at the junction
TYPE TSC/TLC T SERIES FLEXIBLE DISC COUPLINGS
TYPE TSC/TLC A Stainless steel flexible discs B Overload collars C Cartridge transmission unit D Anti-fly feature E Anti-corrosion treatment F Hubs with API puller holes G Robust hub bolt H Large shaft
Level 1 Physics, 2018
90937 909370 1SUPERVISOR S Level 1 Physics, 2018 90937 Demonstrate understanding of aspects of electricity and magnetism 2.00 p.m. Friday 23 November 2018 Credits: Four Achievement Achievement with Merit
THE INNOVATOR OF OUR INDUSTRY. SuperSprings.... They Simply Are the World s Finest Die Springs
THE INNOVATOR OF OUR INDUSTRY SuperSprings... They Simply Are the World s Finest Die Springs The SuperSprings Story SuperSprings We take die springs very seriously... that s why we recently built the most
EXPERIMENT 4 OHM S LAW, RESISTORS IN SERIES AND PARALLEL
220 4- I. THEOY EXPEIMENT 4 OHM S LAW, ESISTOS IN SEIES AND PAALLEL The purposes of this experiment are to test Ohm's Law, to study resistors in series and parallel, and to learn the correct use of ammeters
Service Instructions. Syntron Electromagnetic Vibratory Feeder Model: F-212-B
Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Service Instructions Syntron Electromagnetic Vibratory Feeder Model: F-212-B Spring Replacement Parts List Coil and/or Core
LINEAR BAR GRILLES. GRILLES-Linear Bar
LINEAR BAR GRILLES A range of linear bar grilles with horizontal blades at either 0, 15, 0 or 45 deflection and fixed or removable cores. Usually used in sidewall applications, but they are also designed
Charles Flynn s Permanent Magnet Motor.
Charles Flynn s Permanent Magnet Motor. Patent US 5,455,474 dated 3rd October 1995 and shown in full in the Appendix, gives details of this interesting design. It says: This invention relates to a method
ABB Power T&D Company Inc. Relay Division Coral Springs, FL Allentown, PA. Non-Directional, Single Phase Adjustable Time Delay Device No.
September, 1990 Supersedes Descriptive Bulletin 41-100, pages 1-4, dated June, 1989 Mailed to: E, D, C/41-100A Hi-Lo co induction-disc type overcurrent relays are activated when the current in them exceeds
The curvature of the wire increases the stress on the inside of a helical extension or compression spring and decreases on the outside.
Shear Stress Helical extension and compression springs are ed to a torsional shear stress and to a traverse shear stress. There is also an additional stress effect due to the curvature of the helix. Curvature
High Demand Questions QUESTIONSHEET 1 (a) Teresa set up the circuit shown in the diagram. The ammeter reading was 0.4 A.
High Demand Questions QUESTIONSHEET 1 (a) Teresa set up the circuit shown in the diagram. The ammeter reading was 0.4 A. A 4 Ω (i) What is the value of the current through the 4Ω resistor? (ii) What is
ELECTRO LIFT, INC. 204 SARGEANT AVENUE, P.O. BOX 827, CLIFTON NJ TELEPHONE FAX NUMBER
ELECTRO LIFT, INC. 204 SARGEANT AVENUE, P.O. BOX 827, CLIFTON NJ 07013 TELEPHONE 800 338 9951 FAX NUMBER 973 471 2814 WWW.ELECTROLIFT.COM HOW TO ASSEMBLE AN ELECTRO LIFT BRAKE The following is a basic
Basic Instruments Introduction Classification of instruments Operating principles Essential features of measuring
Basic Instruments www.worldwebsites8.blogspot.com Introduction Classification of instruments Operating principles Essential features of measuring instruments PMMC Instruments Moving Iron instruments Introduction
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAPALLI 621213 QUESTION BANK --------------------------------------------------------------------------------------------------------------- Sub. Code : EE2402 Semester
RIG-I-FLEX 140 SERIES CURTAIN TRACKS
RIG-I-FLEX 140 SERIES CURTAIN TRACKS Parts Included 140 RIG-I-FLEX CWANA code CORD OPERATED/MOTORIZED WALK-ALONG 140 (240) 140-R (240-R) 141 (241) 141-R (241-R) 142 (242) 142-R (242-R) STRAIGHT CURVED
Introduction. Duct-Free Plenum Boxes. I-TEC Accessories Plenum Boxes, Risers, Trim Kits, and Wall Curbs
I-TEC Accessories Plenum Boxes, Risers, Trim Kits, and Wall Curbs Introduction When installing the I-TEC in a classroom or other occupied environment, sound and appearance is very important to a customer.
Service Instructions. Syntron Light-Capacity Electromagnetic Model: F-T01-A DF-T01-A
Service Instructions Syntron Light-Capacity Electromagnetic Model: F-T01-A DF-T01-A Service Instructions Syntron Light-Capacity Electromagnetic Vibrating Feeders Models: F-T01-A and DF-T01-A Contents Page
Principles and types of analog and digital ammeters and voltmeters
Principles and types of analog and digital ammeters and voltmeters Electrical voltage and current are two important quantities in an electrical network. The voltage is the effort variable without which
Bistable Relay. Types PSU6n, PSU14n. Station Automation & Protection. ABB Substation Automation Products
Station Automation & Protection Bistable Relay Types PSUn, PSUn. ABB Substation Automation Products Features High degree of reliability, even when it has been idle for a long time PSUn.. with mechanical
1010C Sliding Mall Front
NOVEMBER, 2017 FEATURES 1 Features Interior sliding mall front with parallel stacking capability Multi-track or single track with flush or surface mounted tracks Stainless steel cap on sill track Heavy
Camaro Frame System. g-machine Front Subframe, Frame Connector and g-bar Rear Suspension System for Camaro/Firebird
1970-81 Camaro Frame System g-machine Front Subframe, Frame Connector and g-bar Rear Suspension System for 70-81 Camaro/Firebird Subframe Connector System g-bar Rear Suspension System (Full-length frame
(12) Patent Application Publication (10) Pub. No.: US 2001/ A1
(19) United States US 2001 0023637A1 (12) Patent Application Publication (10) Pub. No.: US 2001/0023637 A1 Klitmose et al. (43) Pub. Date: Sep. 27, 2001 (54) FLEXIBLE PISTON ROD (76) Inventors: Lars Peter
Welded Steel Conveyor Pulleys
ANSI / CEMA B105.1-2009 A REVISION OF ANSI/CEMA B105.1-2003 (Approved May 19, 2009) CEMA Standard B105.1 Specifications for Welded Steel Conveyor Pulleys With Compression Type Hubs Conveyor Equipment Manufacturers
Single-Phase Meter Components
Single-Phase Meter Components S T U D E N T M A N U A L March 2, 2005 2 STUDENT TRAINING MANUAL Prerequisites: None Objectives: From memory, you will be able to explain the parts and function of a single-phase
Corsa Performance Marine Solenoid & Harness Testing Procedures
Solenoids/Actuators Four-Wire Solenoid Testing Procedures (White Connector) 1. Disconnect solenoid from harness at quick disconnect and check terminals for corrosion. Terminal plugs should be locked in
PSIM Tutorial. How to Use Lithium-Ion Battery Model
PSIM Tutorial How to Use Lithium-Ion Battery Model - 1 - www.powersimtech.com This tutorial describes how to use the lithium-ion battery model. Some of the battery parameters can be obtained from manufacturer
Introduction to Bellows Why bellows are used in Piping System?
Introduction to BELLOWS http://www.sigmaflexeng.com http://www.sigmaflexeng.com Manufacturers of Expansion Joints & Flexible Metal Hose Assemblies Reg. Office & Factory: 865/2 GIDC INDUSTRIAL ESTATE, MAKARPURA,
SL20C SL22C. ScreenLine. Technical Catalogue. english. double-glazed unit 20 mm 22 mm
VENETIAN SL20C SL22C BLIND english Technical Catalogue double-glazed unit 20 mm 22 mm dimensions technical specification SL20C SL22C System C C SL20C VENETIAN SL22C BLIND The venetian blinds SL20C / SL22C
FAN PERFORMANCE MODULATION
FAN PERFORMANCE MODULATION Some fan systems have changing air requirement during operation, such as variable air volume systems, while others have changing pressure requirements; both airflow and pressure
SuperSprings High Performance Die Springs Inch and Metric
THE INNOVATOR OF OUR INDUSTRY SM SuperSprings High Performance Die Springs Inch and Metric The SuperSprings Story SuperSprings We take die springs very seriously... that s why we recently built the most
JIS SPRINGS SeRvIce We DelIveR and QualIty you can DePeND on DaNly IeM DaNly IeM DaNly IeM DaNly IeM
JIS SPRINGS 1 JIS SPRINGS Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die and mold components supplied globally to the parts forming industry. Backed by years
Intermediate weight at 155kg Peak continuous fields up to 3 T for 15mm pole face diameter at 8mm gap Any mounting orientation Fast cycle times
OVERVIEW The 5405 dipole electromagnet is a fit, form and function upgrade for the 5403 electromagnet system. This upgrade provides approximately 40% more field for a given pole gap. The 5405 is shipped
Industrial Motors. But first..servos!
Industrial Motors DC Motors AC Motors Three Phase Motors Specialty Motors Stepper Motors But first..servos! Servos can be AC or DC but they do one thing: Sense the output position and adjust the input
Technical features overview
Technical features overview Reference Product name Extraction Size Material Stroke direction Snap Locking* 5 Damping Max. load capacity per pair [N] Product category Product Section Steel X* 4 A B BM EG
SECTION 3 BASIC AUTOMATIC CONTROLS UNIT 15 Troubleshooting Basic Controls
SECTION 3 BASIC AUTOMATIC CONTROLS UNIT 15 Troubleshooting Basic Controls UNIT OBJECTIVES After studying this unit, the reader should be able to Describe and identify power- and non-power-consuming Describe
The fundamentals of flexible shaft couplings
Technical Article October 2016 The fundamentals of flexible shaft couplings Understanding the basic requirements for shaft couplings The requirements to connect shafts on different types of machines have
Galaxy blue. Signal blue
nomad nomad model NO 100 in white. Cardinal red Burgundy Orange White Off white sand Black Light blue Signal blue Galaxy blue Purple Signal green Dark green Beige Gold Brown Neutral grey Signal yellow
Welcome CIN::APSE. Technology
Welcome This guide has been designed to familiarize you with CIN::APSE - the unique, high-performance, solderless interconnect solution - and to guide you in using CIN::APSE in your applications. Table
Vehicle Identification and Specifications
I_D_Specs_lab Vehicle Identification and Specifications Look for the vehicle emissions label. If your car does not have one inform the instructor. 1) Where is the emissions label on this vehicle? 2) According
Stack Light- Light Only. Stack Light with Sound
Stack Light- Light Only Part Number Structure JT 028 - RYGBC - C D Series: JT = Triangle Shaped Stack Light Maximum Voltage: 028 = 20 28 Vac/dc; 120 = 90 120 Vac Only Stack Colors: R = Red; Y = Yellow/Amber;
Engineering Data. Series V Closed Circuit Cooling Towers. VFL Engineering Data...1. VF1 Engineering Data...3
Engineering Data Series V Closed Circuit Cooling Towers Engineering Data VFL Engineering Data....................................1 VF1 Engineering Data....................................3 Discharge Hoods
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
Magnetic Effects of Electric Current
Magnetic Effects of Electric Current Question 1: Why does a compass needle get deflected when brought near a bar magnet? Answer: A compass needle is a small bar magnet. When it is brought near a bar magnet,
Chapter 28. Direct Current Circuits
Chapter 28 Direct Current Circuits Direct Current When the current in a circuit has a constant magnitude and direction, the current is called direct current Because the potential difference between the
Chapter 9 Basic meters
Chapter 9 Basic meters Core Competency Units UEENEEE003B Solve problems in extra-low voltage single path circuits UEENEEE004B Solve problems in multiple path DC Circuits Essential Knowledge and Associated
Service Instructions. Syntron Electromagnetic Feeder Model: F-010-B DF-010-B
Service Instructions Syntron Electromagnetic Feeder Model: F-010-B DF-010-B Service Manual Syntron Electromagnetic Feeder Models: F-010-B and DF-010-B Installation Operation Maintenance 1 Table of Contents
PRESSURE REDUCING VALVE
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING VALVE with LOW-FLOW BY-PASS FEATURE Main Line valve
Circuit 1: Closed Circuit A closed circuit is a complete circuit that allows current to flow.
Paper Circuits Gather the following materials: Paper Circuit video tutorials 4 pieces of copper conductive tape (each will be cut into 18 pieces) 5 LEDs (3mm) 1 coin cell battery (3V) 1 binder clip (optional)
2- PELTON TURBINE: Figure (2-1) The Pelton turbine
2- PELTON TURBINE: This is the only type used in high head power plants. This type of turbine was developed and patented by L.A. Pelton in 1889 and all the type of turbines are called by his name to honour
SELF-LOADING TRUCK EVALUATION
SELF-LOADING TRUCK EVALUATION Paul Taylor Figure 1 - Trailer Unloading Procedure ABSTRACT at between 30% and 35% below its rated capacity. This Report is an evaluation of a self-loadin logging truck incorporating
2010 International Application Guide Volume 9 Issue VISTA SERIES
2010 International Application Guide Volume 9 Issue 1 1-11-10 VISTA SERIES Vista Series Models VL917IB / VL917FIB 33 x 51 (84 cm x 130 cm) VL918IB / VL918FIB 33 x 48 (84 cm x 122 cm) VL995IB2740 26.75
Stacker Belt Tensioning
Stacker Belt Tensioning Hybrid Stacking Belt Tensioning Procedure This procedure is used when a belt needs to be tensioned due to looseness. Follow the directions thoroughly to ensure proper belt tensioning.
Product Application Guide- 30mm Stacklights. 30 mm Stacklight- Light Only
Product Application Guide- 30mm Stacklights 30 mm Stacklight- Light Only Part Number Structure JR 28 - RYG - 4 Series: JR = 30mm Round Stacklight Maximum Voltage: 16 = 9 to 16 Vdc; 28 = 20 to 28 Vac/dc
AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
TUTORIAL Lithium Ion Battery Model
TUTORIAL Lithium Ion Battery Model October 2016 1 This tutorial describes how to use the lithium ion battery model. Some battery model parameters can be obtained from manufacturer datasheets, while others
Tech Tip The Fundamentals of Supercapacitor Balancing
Tech Tip The Fundamentals of Supercapacitor Balancing The average supercapacitor has a maximum charging voltage of between 2.5 and 2.7 V. For many applications a voltage this low isn t particularly useful,
AUTOMOTIVE MAINTENANCE TECHNOLOGY SUBJECT: AUTOTRONIC 2 TITLE: BREAKER-TRIGGERED TRANSISTORISED IGNITION TI-B
Breaker-triggered transistorized ignition TI-B The ignition distributor of the breaker- triggered transistorized ignition system (TI-B) is identical to the ignition distributor of the breaker-triggered
ilift Suspension Lift System Universal Fitment Sheet
Suspension Lift Technologies LLC 2521 N Arizona Ave Chandler, AZ 85225 tel: 602-733-6410 info@iliftsystems.com ilift Suspension Lift System Universal Fitment Sheet ilift Suspension Lift System The ilift
BUILD-UP OF INSOLUBLE IN FOUR STROKE ENGINE SYSTEM OIL
CASE STUDY 2 BUILD-UP OF INSOLUBLE IN FOUR STROKE ENGINE SYSTEM OIL Figure 1: Lube oil treatment system A ship has 4 stroke engine diesel generators of 1500 kw, using 600 cst heavy fuel oil. The generator
Design and Reliability of a High Voltage, high Current Solid State Switch for Magnetic Forming Applications
Design and Reliability of a High Voltage, high Current Solid State Switch for Magnetic Forming Applications A. WELLEMAN, R. LEUTWYLER, S. GEKENIDIS ABB Switzerland Ltd, Semiconductors, Fabrikstrasse 3,
Intelligent Drivesystems, Worldwide Services MODULAR INDUSTRIAL GEAR UNITS
Intelligent Drivesystems, Worldwide Services EN MODULAR INDUSTRIAL GEAR UNITS NORD DRIVESYSTEMS INDUSTRIAL GEAR UNITS Main fields of application n Materials transport (belt, plate, screw & chain conveyors,
Construction Attachments, Inc. Auxiliary Hydraulics
Construction Attachments, Inc. Auxiliary Hydraulics D03 KIT WITHOUT HOSES FOR TRACTOR WITH LESS THAN 14GPM OPEN CENTER HYDRAULIC SYSTEM AND A FACTORY OR AFTERMARKET 2 FUNCTION LOADER VALVE BEFORE INSTALLING
WAVE SPRINGS SPECIFICATION FORM
WVE SPRINGS SPECIFICTION FORM LOD Equal Deflection and Load LOD Reduced Operating Height REDUX TM Wave Spring Coil Spring RDIL WLL FREE HEIGHT WIRE THICKNESS OPERTES IN HOLE DIMETER CLERS ROD DIMETER TURNS
Science Olympiad Shock Value ~ Basic Circuits and Schematics
Science Olympiad Shock Value ~ Basic Circuits and Schematics Use a single D battery, a single bare wire and a light bulb. Find four different ways to light the light bulb using only a battery, one wire
Step by step assembly manual. Silent series. Designed and manufactured by Audipack
Step by step assembly manual Silent series Designed and manufactured by Audipack Quick checklist Silent booth 9300, 9400, 9500 Ventilation units or Level Power cords for ventilation units Alan key Assembly
Analysis of Axially Symmetric Non-Standard Compression Springs
53 rd Internationales Wissenschaftliches Kolloquium Technische Universität Ilmenau 08 12 September 2008 M. Hayes Analysis of Axially Symmetric Non-Standard Compression Springs INTRODUCTION Lowest possible
Pneumatic Systems. Module 3: Logic Operations in Electropneumatics. IAT Curriculum Unit PREPARED BY. August 2008
Pneumatic Systems Module : Logic Operations in Electropneumatics PREPARED BY IAT Curriculum Unit August 2008 Institute of Applied Technology, 2008 2 Module : Logic Operations in Electro-pneumatics Module
Unit P.2, P2.3. Currents in electric circuits E ½. F Fuel gauge indicator. Fuel tank. Ammeter. Float. Battery. Sliding contact. Pivot 12V.
Currents in electric circuits 1. The diagram shows the fuel gauge assembly in a car. The sliding contact touches a coil of wire and moves over it. The sliding contact and the coil form a variable resistor.
Page 1 of 19. Website: Mobile:
Question 1: Why does a compass needle get deflected when brought near a bar magnet? A compass needle is a small bar magnet. When it is brought near a bar magnet, its magnetic field lines interact with
Rexroth. Spare parts list. Bosch Group. Part No.: R Designation: A4VG28HW1/30R-PZC10N001E-S
: R909442713 : A4VG28HW1/30R-PZC10N001E-S *G* R909709194 1 R909434314 ROTARY GROUP L 2 R909600897 CONTROL, HYDRAULIC L 3 R909428735 PORT PLATE WITH VALVES L 6 R909600949 CONTROL MODULE L 8 R909426341 HOUSING
LABORATORY 2 MEASUREMENTS IN RESISTIVE NETWORKS AND CIRCUIT LAWS
LABORATORY 2 MEASUREMENTS IN RESISTIVE NETWORKS AND CIRCUIT LAWS The objective of this experiment is to provide working knowledge of the ammeter, voltmeter, and ohmmeter as well as their limitations in
PARAFLEX Pin bushing Couplings That Keep Shaft Reaction Force from Mounting Misalignment Extremely Low
Pin Bushing Pin Bushing stiffness flexibility damping Easy to mount and remove RoHS nominal tque 25 Be ranges φ3 ~ 22 Operating temperature [ ] -30 ~ 100 Backlash Extremely small size Driver Servo mot,