Boomless Flat Fan Nozzles - XT-Boom X Tender

Transcription

1 Boomless lat an s - XT-Boom X Tender The XT introduces boomless spray technology, enabling spray to be targeted into places that conventional booms and other nozzles cannot reach. XT delivers a uniform spray pattern over a distance of up to 16 feet (4.9 m). Ideal for weed control in forests and pastureland. Ideal for applications where a conventional boom cannot be used due to obstacles ommon uses include orchard, vineyard, forestry, pasture, turf and golf course spraying, as well as maintaining rights-of-way and fence rows Excellent low-drift option while extending spray reach Large droplet size reduces spray drift and promotes spray penetration aintains a consistent spray swath over a pressure range of 0-60 psi (-5 bar) Standard models with precision-molded polyacetal nozzle and threaded stainless steel body provide excellent durability and low maintenance US Units (NPT) (PSI) 10 (1/4") 15 (1/4") 0 (1/4") 4 (1/4") 4 (/8") 80 (1/") 167 (/4") 15 (/4") low Gallons per Acre at swath shown GAL/1000 Rate PH (GP) Swath (t) at 40 PSI 48 in high Typical Pattern Produced by XT Series ommon Uses of the Boom X Tender s 14 Adjustable Swath Width Boom X Tender ing (last nozzle on the boom) Swath width can be increased or decreased by adjusting the angle of the nozzle +/- 18. Boomless ing +/- 18 Boomless ing with enter 188

2 SPEIALTY SPRAY NOZZLES Boom X Tender nozzles are ideal for boomless spraying or as the last nozzle on a boom. Hypro s Boom X Tender nozzles provide excellent coverage throughout the swath width for superior results. Gasket, insert and o-ring kits available to rebuild NPT versions. etric Units low Rate (NPT) (BAR) (LP) 10 (1/4 inch) 15 (1/4 inch) 0 (1/4 inch) 4 (1/4 inch) 4 (/8 inch) 80 (1/ inch) 167 (/4 inch) 15 (/4 inch) Application Rate L/Ha - at swath shown K/H Swath Width BAR 1. meters high Swath widths and application rates in charts are based on height of 48 inches (1. metres), a different height will give different swath widths GP = GPA x PH x swath width (in) GP = GPA x 5,940 5,940 PH x swath width (in) eatures ommon Use Weeds Pattern Boomless an Technology Pre-Orifice aterial Stainless or Polyacetal 105º Range 0-60 PSI (-5 BAR) onfiguration NPT & astap s astaps NPT (Thread) Parts Kits for NPT version -XT010 XT010 (1/4") XT010-GIOKIT -XT XT00 XT00 (1/4") XT00-GIOKIT -XT04 XT04 (1/4") XT04-GIOKIT -XT04 XT04 (/8") XT04-GIOKIT - XT080 (1/") XT080-GIOKIT - XT167 (/4") XT167-GIOKIT - XT15 (/4") XT15-GIOKIT Replacement astap Seal W1164 LP = L/ha x Kmph x swath width (m) L/ha = LP x Kmph x swath width (m) odel Description Boom X Tender Tee/ Swivel Kit for use with 1/4" NPT or astcap XT s 189

3 Acid-Resistant Lo-Drift 110 o The Lo-Drift s two-part construction includes a pre-orifice, which reduces the number of drift prone droplets and makes it ideal for broadcast application of acidic defoliants. Acid-resistant material construction Significantly reduces spray drift, widening the operational window Balanced droplet size for effective, on-target spray US Units low Gallons per Acre 0 inch nozzle spacing GAL/1000 t Rate PH 0 inch nozzle spacing (PSI) (GP) V size based on ASABE S57.1 standard. eatures ommon Use Acid Defoliants Pattern Tapered lat an Technology Pre-Orifice aterial PVD 110º Range PSI (1-5 BAR) onfiguration s s s 110º 90LD LD LD LD06110 etric Units (BAR) low Rate (LP) Application Rate L/Ha - 50 cm Spacing KH , ,5 0, , , , , , ,5 1, , , , , , ,5 1, , , , , V 1 1, ,5 1, , , , , size based on ASABE S57.1 standard. 190

4 Sudden Impact High Impact ar Wash 5% WATER SAVINGS! 5X S THE LIE! Sample : TUR4B-.0 Breakdown: TUR 4 B -.0 series material size brass.0 Provides a high impact, controlled rotation 0 water stream with much greater impact and cleaning efficiency than other nozzles which reduces wash time & increases thru-put Lasts up to five times longer than other rotating nozzles on the market, reducing operating costs over the life of the car wash Improved cleaning efficiency over other rotating nozzles reduces water consumption by up to 5% Tungsten carbide seat and nozzle provide unmatched wear and shatter resistance over ceramic material commonly utilized in other nozzles High strength, forged housing available in economical brass or corrosion-resistant 04 stainless steel Elastomer cover protects vehicles and nozzles Precision-machined bearing in rotor offers very high wear resistance and optimal impact Available with 4 pattern for maximum impact or 0 pattern for extra coverage BSP-style connection available in 4 brass (sizes.0,.5, 4.5) for use in ark VII washes SPEIALTY SPRAY NOZZLES Specifications Series * Ideal Impact Distance aterial Temperature TUR4B-x.x 1750 PSI (10 bar) 0-0 (51-76cm) Brass (8º ) TUR4B-x.x-BSP 1750 PSI (10 bar) 0"-0" (51-76cm) Brass 4º 180º (8º ) TUR4S-x.x 000 PSI (07 bar) 0-0 (51-76cm) Stainless (8º ) TUR0B-x.x 100 PSI (90 bar) 15-5 (8-6cm) Brass (8º ) TUR0S-x.x 000 PSI (07 bar) 15-5 (8-6cm) Stainless (8º ) *See rate chart below for specific information Dimensional hart Series A (in) A (mm) B (in) B (mm) 1/4 NPT or 1/4" BSP A B low Rate (US GP) low Rate (L/min) (PSI) (BAR) Sample TUR 4 B.0 odel aterial Dash Number Turbo (NPT) 4 or 0 B Brass or S Stainless.0,.0,.5, 4.0, 4.5, 5.0, 5.5, 6.0 Turbo (BSP) for ark VII Washes* 4 B Brass.0,.5, 4.5 Note: BSP odels: Add suffix BSP -example TUR4B-.0BSP 191

5 UAS - eramic High Impact ar Wash 10X S THE LIE OVER STAINLESS! Sample : UAS1/ Breakdown: UAS 1/ model connection spray angle size UAS 1/4 NPT 5º 04 eramic inserts provide up to 10 times the life of hardened stainless steel, maximizing your return on investment and decreasing downtime for nozzle replacement Extra long-life ceramic orifice is nearly diamond-hard to resist wear olded ceramic virtually eliminates chemical and mineral buildup in the orifice area Wear characteristics make the UAS nozzle ideal for reclaim systems The U-shaped outlet provides a high-impact spray without additional inserts Wedge-shaped orifice insert seats tightly as spray pressures increase Precision-machined stainless steel carriers resist corrosion and damage High quality components easily withstand wash pressures of 800 to 5000 psi (55-45 BAR) 1/4 NPT connection fits all common applications Permanent laser-etched part number markings ease identification omes in spray angles of 0, 15, 5, 40 low Rate (US GP) (PSI)

6 HP-High Hardened Stainless Steel Achieves up to 16%* greater impact than competitive high pressure nozzles, making them the best value on the market today Hardened 416 stainless steel, the industry standard for long-life Reliable performance in high pressure applications up to 4000 psi (76 BAR) High impact spray in a tightly formed fan pattern onsistent, even distribution provides uniform cleaning without overlapping Protected outlet design guards the orifice during installation and use Versatile 1/4 and 1/8 NPT connections suit a variety of applications omes in spray angles of 0º, 5º, 15º, 5º, 40º Improved marking for easy identification and replacement *ommissioned with an independent tester SPEIALTY SPRAY NOZZLES Available s** X In Stock X Available ontact actory Sample : HP1/4-504 Degree X X X X X X X X X X X X 5 X X X X 15 X X X X X X X X X X X X X 5 X X X X X X X X X X X X 40 X X X X X X X X X X X X 0 X X X X X X X X X X X X 5 X X X X 15 X X X X X X X X X X X X 5 X X X X X X X X X X X X 40 X X X X X X X X X X X X **or additional sizes, please contact Technical/Applications at /8 NPT 1/4 NPT US Units 1/8 NPT 1/4 NPT low Rate (US GP) (PSI) X X X X X X X X X X X X X X X X X X X X X X X X X X etric Units 1/8 NPT 1/4 NPT low Rate (L/min) (BAR) X X X X X X X X X X X X X X X X X X X X X X X X X X Breakdown: HP 1/ model connection spray angle size HP 1/4 NPT 5º 04

7 ar Wash Kits Save time by not having to order each replacement tip individually, just order one part number for your model of car wash to receive the entire replacement kit. When you install Hypro spray tips, your wash will be brought back to life with increased performance, making your car wash better than new! Washworld High Velocity Arch & Under arriage Kits ar Wash Kits Kit Description Quantity ontains: HPWWHV HPWWHVU UASWWHV UASWWHVU Wash World High Velocity Arch s, Hardened Stainless Steel Wash World High Velocity Under-arriage s, Hardened Stainless Steel Wash World High Velocity Arch s, Premium eramic Orifice Wash World High Velocity Under-arriage s, Premium eramic Orifice 1 HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ UAS1/ UAS1/ UAS1/ UAS1/ UAS1/ UAS1/ UAS1/ PDQ Laser 4000 Kits ar Wash Kits Kit Description Quantity ontains: UASPDQ4000 HPPDQ4000 D&S 5000 T, Super 5000 & Quicksilver, Arch & Wheel Blaster Kits ar Wash Kits Kit Description Quantity ontains: HPDS5000 HPDSQ0WB PDQ Laser 4000 Stainless/ eramic s PDQ Laser 4000 Arch 1/4 Hardened Stainless Steel s D&S 5000, Super 5000, Quicksilver 8 GP Arch s D&S Quicksilver Wheel Blaster Option s 11 UAS1/ UAS1/ UAS1/ UAS1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/ HP1/

8 P-ulcoJet ull one US Units Thread olor one low Rate (Gallons per inute) of Water at 68º (PSI) A1P1.0 1/8 NPT Orange 45º A1P1.5 1/8 NPT Red 55º A1P.0 1/8 NPT Light Blue 60º Precision-molded orifice provides accurate and consistent full cone spray pattern Widely used 1/8 and 1/4 NPT or 1/8" and 1/4" BSP connections Available in a variety of standard flow and cone angle options to fit application requirements olor coded by flow rate to simplify nozzle installation and replacement Excellent wear and chemically-resistant Solef Polyvinylidene luoride (PVD) polymer Ideal for low pressure rinsing, washing, coating, cooling, and additive application Sample : 90A1P.0 Breakdown: 90 A1 P.0 material thread family nozzle size 90 = PVD A1 = 1/8 NPT P see table A = 1/4 NPT B1 = 1/8 BSP B = 1/4 BSP SPEIALTY SPRAY NOZZLES 90A1P.0 1/8 NPT Lime Green 50º A1P.5 1/8 NPT Terracotta 60º A1P5.0 1/8 NPT Blue 80º AP6.5 1/4 NPT Purple 50º AP10 1/4 NPT Olive Green 70º etric Units Thread olor 1 Bar low Rate (L/min) of Water at 0 (BAR B1P1 1/8 BSP Orange B1P1.W 1/8 BSP Natural B1P1.5 1/8 BSP Red B1P 1/8 BSP Light Blue B1PW 1/8 BSP Light Blue B1P 1/8 BSP Lime Green B1P.5 1/8 BSP Terracotta B1P.7W 1/8 BSP Gray B1P5 1/8 BSP Blue BP6.5 1/4 BSP Purple BP10 1/4 BSP Olive Green

9 anjet - lat an PVD ost popular selling nozzle for lower pressure car wash applications hemically-resistant Polyvinylidene luoride (PVD) polymer s up to 500 PSI Available spray angles ranging from 0, 5, 40, 65, 80 One-piece male 1/4 NPT and 1/4" or 1/8" BSP Hex body prevents distortion of the orifice and provides quick and easy installation Part number is molded into front of nozzle Available s* Degree /4 NPT X Available ontact actory 0º X X X X X X X X X X 5º X X X X X X X X X X X X X 40º X X X X X X X X X X X X X X 65º X X X X X X X X X X X X X X X X 80º X X X X X X X X X X X X X *or additional sizes, please contact Technical/Applications at Sample : 90A04E80 Breakdown: 90 A 04 E 80 material thread model nozzle pattern 90 = PVD A1 = 1/8 NPT NPT size even fan A1 = 1/8 NPT B1 = 1/8" BSP B = 1/4" BSP fan angle degrees low Rate, (US GP) (PSI) olor Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray low rate, (L/min) (BAR) olor Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray

10 isting s -, HA, P, AD, A The Hypro range of misting nozzles produce a high percentage of droplets smaller than 50 microns making the sprays suitable for humidification and evaporative cooling. They are chemically resistant to also allow use with pesticides, disinfectants, and odor control agents as well as dust suppression. A variety of connection options match most applications orrosion-resistant construction Strainers are included on many models to extend service life Anti-drip checks are standard in P and AD models SPEIALTY SPRAY NOZZLES langed s: -lat an olor US pressure (PSI) L/hr@ pressure (bar) Only White ,59 1,8 16,9 18,9 1, Olive Green ,04 18,5,68 6,19 9, langed s: HA-Hollow one US pressure (PSI) L/hr@ pressure (bar) olor Only White ,01 4,6 5,67 6,55 7, 0HA01110 ream ,01 4,6 5,67 6,55 7, 0HA01-65 int Green ,7 6,6 8,10 9,6 10,46 0HA01480 White ,05 6,99 8,56 9,88 11,05 0HA01570 ommon Use Pattern Technology aterial eatures ooling & Humidification an or Hollow one Elliptical Orifice or Swirl Polyacetal º Range onfiguration PSI (-10 BAR) s, Push-fit, or NPT Retaining Nuts for langed Tips 510WH 510GY 510BL Description /8 inch BSP Retaining Nut White Polypropylene /8 inch BSP Retaining Nut Gray Polypropylene /8 inch BSP Retaining Nut Black Polypropylene 197

11 isting Accessories Push-fit Anti-drip : P-Hollow one /8 olor US pressure (PSI) L/hr@ pressure (bar) with up Strainer White ,65 4,1 5,16 5,96 6,66 0PA Black ,65 4,1 5,16 5,96 6,66 0PA008-80BL White ,09 5,88 7,0 8,1 9,9 0PA Black ,09 5,88 7,0 8,1 9,9 0PA01-105BL 1 isting Accessories for Push-it Anti-drip s Reference Number Description 1 195Q69 Push-in Porous Plastic 50 esh Post ilter Barbed Tee 1 8 inch NPT x 1 4 inch Barbs Black (6 mm) 10AEE9000 Barbed Tee 1 8 inch NPT x 1 4 inch Barbs White (6 mm) 8818 Barbed Tee 1 8 inch NPT x 8 inch Barbs Black (6 mm) 11S18 Push-in Tee 1 inch SLIP x 1 inch SLIP x 1 8 inch () 1/8 NPT Anti-drip : AD-Hollow one olor US pressure (PSI) L/hr@ pressure (bar) Only with up Strainer Gray ,89,4 4,09 4,7 5,8 01AD S01AD ream ,81 5,55 6,80 7,85 8,78 01AD S01AD Blue ,74 7,78 9,5 11,01 1,1 01AD /8 NPT : A-Hollow one olor US pressure (PSI) L/hr@ pressure (bar) Only with SS up Strainer with SS Post Strainer with Plastic ilter White ,9,,7,14,51 01A S01A AUSA0.5 PP01A Gray ,89,4 4,09 4,7 5,8 01A S01A AUSA1.0 PP01A White ,89,4 4,09 4,7 5,8 01A0.7-80W S01N-W 01N-W PP01A0.7-80W ream ,81 5,55 6,80 7,85 8,78 01A S01A AUSA.0 PP01A Blue ,74 7,78 9,5 11,01 1,1 01A S01A AUSA.0 PP01A Yellow ,05,15 8,5,74 6,61 01A isting Accessories for 1/8 NPT Reference Number Description up Strainer 00 esh (its Rear of Threaded isting s) PIA50 Push-in 00 esh Post Strainer inch BSP x 1 inch Wet Boom Body 198

12 lat an s - Even 80 o or Knapsack/Backpack ers The Hypro Even lat an spray nozzle creates a consistent pattern that is ideal for single nozzle applications. ommonly used with knapsack sprayers for precise control 80º angle distributes a medium fine spray evenly across the swath ixed droplet spectrum is ideal for all targets One piece design SPEIALTY SPRAY NOZZLES US Units Width 0 in height (in) Width 50 cm height (m) (PSI) (BAR) low Rate (GP) low Rate (LP) Gallons per Acre (Single Applications) PH size based on ASABE S57.1 standard. Application rates shown reflect single nozzle applications at walking speeds. etric Units Application Rate L/ha (Single Applications) K/H size based on ASABE S57.1 standard. Application rates shown reflect single nozzle applications at walking speeds. eatures ommon Use Knapsack Pattern Even lat an Technology Elliptical Orifice aterial Polyacetal 80º Range 0-40 PSI (- BAR) onfiguration s s 80º aps (5 Pack) E80-01 AP00-01 E AP E80-0 AP00-0 E80-0 AP

13 US Units: DeflectTip V Width 0 in height (in) (PSI) low Rate (GP) Gallons per Acre (Single Application) PH DT0.5 80º 40 PSI X DT º 40 PSI DT º 40 PSI DT º 40 PSI size is based on ASABE S57.1 standard. etric Units: DeflectTip ASABE Width 50 cm height (m) Width 0 in height (in) (BAR) (PSI) low Rate (LP) low Rate (GP) Application Rate L/ha (Single Application) K/H 4 5 DT0.5 80º BAR DT º BAR DT º BAR DT º BAR size is based on ASABE S57.1 standard. US Units: PoliJet DeflecTip and PoliJet 5 o -17 o or Knapsack/Backpack ers The DeflecTip and PoliJet wide-angle flood fan nozzle creates a wide pattern at very low pressures while creating mainly medium and coarse droplets. It is well suited for sprayers using very low pressures, including manual sprayers. Different spray angles offer a choice of swath widths PoliJet nozzles are designed for knapsack applications, giving a low drift, course, even spray ircular orifice reduces the chances of blocking Gallons per Acre (Single Application) PH 1 4 AN0.6 5º 40 PSI AN1. 90º 40 PSI AN1.8 11º 40 PSI AN º 40 PSI size is based on ASABE S57.1 standard. eatures ommon Use Knapsack Pattern lood Technology Deflection aterial Polyacetal 5º-17º Range PSI (1- BAR) onfiguration DT s s aps (5 Pack) 0DT0.5 AP0-0 0DT0.75 AP0-0 0DT1.0 AP0-0 0DT1.5 AP0-0 AN s s aps (5 Pack) 0AN0.6 AP0-0 0AN01. AP0-0 0AN01.8 AP0-0 0AN0.4 AP0-0 etric Units: PoliJet BP Width 50 cm height (m) (BAR) low Rate (LP) Application Rate L/ha (Single Application) K/H 4 5 AN0.6 5º BAR AN1. 90º BAR AN1.8 11º BAR AN BAR BP ODING INE EDIU OARSE BP droplet size based on BP standard. Application rates shown reflect single nozzle applications at walking speeds. 00