STOCK RATIO MULTIPLIER MODEL NUMBER SYSTEM
|
|
- Edwina Arnold
- 5 years ago
- Views:
Transcription
1 STCK RATI MULTIPLIER MDEL NUMBER SYSTEM Grove Gear 800 Series Ratio Multiplier Model Number Nomenclature All stock and custom 800 series reducers are identified by a model number. The model number appears on the nameplate and describes pertinent features of the reducer. An example follows, along with a listing of the various letters and positions used. NTE: All ratio multipliers also have a catalog number for example L. Reducers and renewal parts should be ordered by catalog number. Accessories that are field installed will not be noted on the nameplate. Housing Material Size Ratio Motor Flange utput Flange DATE CDE MDEL N. CATALG N. TYPICAL NAMEPLATE (Grove Gear shown) G L INPUT HP UT TRQ IN-LBS RATI :1 LUBED WITH GRVE GEAR UNIN GRVE, WI MADE IN U.S.A 1750 RPM INPUT AGMA CLASS 1 SERVICE SHC629 blank = Cast Iron A = Aluminum S = Stainless Steel SLID UTPUT SHAFT Motorized, Quill Input M Motorized, Flexible Coupling Input Non-Flanged Sample Model Number SIZE 1, 2, 3 Motorized Quill Input Series 1; 4:1 Ratio, 5/8 Input Bore with NEMA 56C Flange, and 56C output flange Size Ratio Motor utput Input Flange Flange MAXIMUM RATING TABLES Size 1 SEE SELECTIN TABLES N PAGE 272 FR ALL AVAILABLE RATIS NEMA Input Flange Code For NEMA Frame 48 48CZ 56 56C TC TC TC NEMA Input Flange Code TC blank Non-motorized input Exact Ratio Input R.P.M. utput R.P.M. Input H.P. utput H.P. utput TQ. (lb-in.) verhung Load (lbs.) Size For NEMA Frame 56 56C TC TC TC ALL RATINGS SAME FR CAST IRN, ALUMINUM, and STAINLESS STEEL RATI MULTIPLIERS Exact Ratio Input R.P.M. utput R.P.M. Input H.P. utput H.P. utput TQ. (lb-in.) verhung Load verhung Load 56C utput (lbs.) 140TC utput (lbs.) Size 3 Exact Ratio Input R.P.M. utput R.P.M. Input H.P. utput H.P. utput TQ. (lb-in.) verhung Load (lbs.)
2 CAST IRN DIMENSINS SIZE 1 BD DIA AJ AK DIA HLES 3/8-16 UNC (AVAILABLE N 56C INPUT NLY) BF (4)HLES BRE KWY..188 x NEMA 56C UTPUT FACE SIZE 1 DIMENSINS (Inches) Frame Combinations AJ AK BD BF Input Input Weight (Input - utput) Bore Keyway* (lbs.) 48CZ - 56C /8 X 1/ C - 56C /16 X 3/32 19 * Keyway width by depth SIZE 2 Q 5.88 DIA BLT CIRCLE 4.50 DIA (2)HLES 3/8-16 UNC 6.64 DIA.46 DIA (4)HLES 3.25 R..875 BRE SIZE 2 DIMENSINS (Inches).53 DIA 4(HLES) Q 4.25 R. BRE NEMA 180TC/210TC UTPUT FACE.50 RQ 4.03 LQ1 NEMA 56C/140TC UTPUT FACE UTPUT KEYWAY Frame Combinations Input T utput Weight (Input - utput) Keyway* Keyway* (lbs.), M, 140TC - 56C.188 x x TC - 140TC.188 x x * Keyway width by depth SIZE DIA 8.50 DIA 7.25 DIA SIZE 3 DIMENSINS (Inches) SEE "Q" FACE UTPUT KEYWAY 2.17 SEE "Q" FACE L1 M M M 1.91 M 1.31, M, Frame Combinations Input T Input utput Weight L1 LQ1 RQ (Input - utput) Bore Keyway* Keyway* (lbs.) 180TC - 180TC x x.125 x TC - 180TC x.156**.250 x.125 x TC - 180TC x.188**.250 x.125 x TC - 210TC x x.156 x TC - 210TC x.156**.312 x.156 x TC - 210TC x.188**.312 x.156 x * Keyway width by depth ** Input keyway for styles M & is.250 x
3 AVAILABLE SELECTINS 274 SIZE 1 CAST IRN SIZE 2 CAST IRN 48CZ 56C L 56C 56C L 48CZ 56C L 56C 56C L 48CZ 56C L 56C 56C L 48CZ 56C L 56C 56C L 48CZ 56C L 56C 56C L 56C 56C L 56C 143-5TC L 143-5TC 56C L 143-5TC 143-5TC L 56C 56C L M 56C 143-5TC L 56C 56C L 143-5TC 56C L 143-5TC 143-5TC L -- 56C L TC L 143-5TC 56C L 143-5TC 143-5TC L M 56C 56C L 143-5TC 56C L 143-5TC 143-5TC L -- 56C L TC L 56C 56C L 56C 143-5TC L 143-5TC 56C L 143-5TC 143-5TC L M 56C 56C L 143-5TC 56C L 143-5TC 143-5TC L -- 56C L TC L 56C 56C L 56C 143-5TC L 143-5TC 56C L 143-5TC 143-5TC L M 56C 56C L 143-5TC 56C L 143-5TC 143-5TC L -- 56C L TC L 56C 56C L 56C 143-5TC L 143-5TC 56C L 143-5TC 143-5TC L M 56C 143-5TC L 143-5TC 56C L 143-5TC 143-5TC L -- 56C L TC L SIZE 3 CAST IRN 182-4TC 182-4TC L 182-4TC 213-5TC L 213-5TC 213-5TC L TC 213-5TC L 182-4TC 182-4TC L M 213-5TC 213-5TC L 254-6TC 213-5TC L TC L 182-4TC 182-4TC L 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC 182-4TC L M 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC L TC L 182-4TC 182-4TC L 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC 182-4TC L M 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC L TC L 182-4TC 182-4TC L 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC 182-4TC L M 182-4TC 213-5TC L 213-5TC 182-4TC L 213-5TC 213-5TC L TC L TC L 182-4TC 182-4TC L M 182-4TC 182-4TC L TC L
4 ALUMINUM DIMENSINS ALUMINUM SIZE 1 AK Q1 BD B.C. AJ BF(4)HLES BF1(2) BRE R3.25 UTPUT KEYWAY ALUMINUM SIZE 1 DIMENSINS (Inches) T Frame Combinations Input Input utput Weight AJ AK BD BF BF (Input - utput) Bore Keyway Keyway (lbs.) 48CZ - 56C /4-20 UNC /8 X 1/16 3/16 x 3/ C - 56C /8-16 UNC /16 X 3/32 3/16 x 3/ ALUMINUM SIZE 2 M 8.13 B.C. AJ BD BF(4) HLES Q2 AK BF1(2) BRE UTPUT KEYWAY R UTPUT KEYWAY UTPUT KEYWAY ALUMINUM SIZE 2 DIMENSINS (Inches) T Frame Combinations Input Input utput Weight AJ AK BD BF BF (Input - utput) Bore Keyway Keyway (lbs.),m 140TC-56C /8-16 UNC /16 X 3/32 3/16 x 3/ TC-140TC /8-16 UNC /16 X 3/32 3/16 x 3/
5 AVAILABLE SELECTINS SIZE 1 ALUMINUM SIZE 2 ALUMINUM C 56C EL C 56C EL C 56C EL C 56C EL C 56C EL C 56C EL C 140TC EL TC 56C EL TC 140TC EL M 56C 56C EL C 140TC EL TC 56C EL TC 140TC EL C EL TC EL C 56C EL C 140TC EL TC 56C EL TC 140TC EL M 56C 56C EL C 140TC EL TC 56C EL TC 140TC EL C EL TC EL C 56C EL C 140TC EL TC 56C EL TC 140TC EL M 56C 140TC EL TC 56C EL TC 140TC EL C EL TC EL C 56C EL C 140TC EL TC 56C EL TC 140TC EL M 56C 56C EL C 140TC EL TC 56C EL TC 140TC EL C EL TC EL C 56C EL C 140TC EL TC 56C EL TC 140TC EL C 56C EL C 140TC EL M 140TC 56C EL TC 140TC EL C EL TC EL
6 DIMENSINS STAINLESS STEEL SIZE 1 STAINLESS STEEL SIZE 1 DIMENSINS (Inches) Frame Combinations Input Input Weight AJ AK BD D BE BE1 BF (Input - utput) Bore Keyway** (lbs) 56C N/A /16 x 3/ TC N/A /16 x 3/32 22 **keyway width by depth SIZE 1 STAINLESS STEEL RATI MULTIPLIER FT KIT FR STYLES TBX, TBXM, TBXMQ C 56C C 140TC C 56C C 140TC TC 56C TC 140TC C 56C C 140TC TC 56C TC 140TC C 56C C 140TC TC 56C TC 140TC Ratio Multipliers CD D V B J L G F A X N M Size utput A B CD D F G H J X L M N V X Catalog Number Weight (lbs) 1 56C G C TC G TC TC G TC NTE: Foot kit is painted steel construction. 277
7 PARTS LIST STYLE STYLE M STYLE Ratio Multipliers STYLE Q SIZE 1, 2 & 3 PARTS LIST; ITEM # DESCRIPTIN HUSING CVER, UTPUT GEAR, UTPUT UTPUT SHAFT SPACER, UTPUT SPACER, UTPUT BEARING, UTPUT BEARING, UTPUT SEAL, UTPUT KEY, UTPUT "" RING, UTPUT SNAP RING, UTPUT SNAP RING, INPUT SNAP RING, INPUT SEAL, INPUT SPACER, INPUT QUILL, CUPLING PININ, INPUT ITEM # STYLE & M SIZE 2 & 3 PARTS LIST (SLID INPUT) 33 DESCRIPTIN FLANGE, QUILL INPUT BLT, INPUT BEARING, INPUT "" RING, ENVIRSEAL ENVIRSEAL NUT, INT. PRES. CMP. PLUG, STEM SPLASH GUARD ITEM # DESCRIPTIN 33 SHAFT, INPUT 34 SEAL, INPUT 35 FLANGE, MTR (M NLY) } Grove Gear WASHGUARD nly 278
Stock Ratio Multiplier Model Number System
Worm - and GEAR+MTR Stock Model Number System TYPICAL NAMEPLATE (Grove Gear shown) Grove Gear 800 Series Model Number Nomenclature RATING @ 1750 RPM INPUT AGMA CLASS 1 SERVICE All stock and custom 800
More informationRatio Multipliers. A Regal Brand
Ratio Multipliers A Regal Brand Driven to be the Best Ratio Multipliers Dual purpose design can be used as a stand alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More information800 Series Gear Reducers Built For Industrial Use
800 Series Built For Industrial Use Precision mounting surfaces and extra threaded bolt holes on top and bottom for flexibility and to accept a wide range of stock mounting accessories. Cast iron NEMA
More informationHub City Spartan Aluminum Worm Gear Drives
Spartan Aluminum Worm Gear Features C-2 Selection Instructions C-3 Descriptions C-4 Single Reduction Ratings C-5 Single Reduction Dimensions C-6 to C-7 Double Reduction Worm-Worm Ratings C-8 Double Reduction
More informationALUMINUM RATIO MULTIPLIERS
More Than Just a Motor Company ALUMINUM RATIO MULTIPLIERS Bulletin 7052 FEATURES 7 5 1 2 3 9 6 8 4 10 1 2 3 4 Lightweight Aluminum Construction is up to 75% lighter and 35% smaller than cast iron reducers
More informationBravo! An Alternative For Machine
Bravo! An Alternative For Machine Vent Free Design.** No breather or vents to leak! Factory lubricated for life with premium synthetic Mobil Glygoyle 460 (PAG) lubricant with an operation range of -25
More informationOutput Shaft Mounting Output Series Code Style Size Ratio Orientation Assembly Motor Flange Bore Code
Single Reduction Worm - Helical - and GEAR+MOTOR Ratio Multipliers Model Number System Worm - Worm 800 Series Gear Reducer Model Number Nomenclature All new stock and custom 800 Series Grove Gear and Electra-Gear
More informationHelical - Inline Interchange Base Selections
BRAVO Helical - Inline Interchange Base Selections BRAVO Accessory Kits Size 717 Interchange Base Selections Mod-Squad Codes Accessory Kits Base Mounting Dimensions Motorized Quill Input Mod-Squad Critical
More information800 Series Gear Reducers Built For Industrial Use
Helical - Push-off holes drilled and tapped into flange for quick motor removal on quill input styles (56 & 140TC frames). 800 Series Gear Reducers Built For Industrial Use Cast iron IEC and NEMA C input
More informationSPARTAN ALUMINUM WORM GEAR DRIVES. For Cast Iron Worm Gear Drives See Section B. New Ratings and Ratios! See Pages C-7, C-10, C-13 C-1
SPARTAN ALUMINUM WORM GEAR DRIVES Spartan Aluminum Worm Gear Features......................................-2 Selection Instructions.........................................................-3 Mounting
More informationISOMETRIC VIEW CONDUIT ENTRIES (NTS) DIMENSIONAL DATA SHEET FOR IQT3 F10/FA10 LINEAR DRIVE (Sizes 50/100) IQT3F-1-STD 8 1:10. 1 of 9 3.
3.50" * 7.5".0" 0 3.9" * ISMETRIC VIEW CNDUIT ENTRIES ELECTRNICS CVER 3.6" * CNDUIT ENTRIES & 6.5 (/4") EARTH PINT 6 6.3" 5.3" 65.56" 9 9.0" MTR CVER DISPLAY WINDW PEN/CLSE SWITCH LCAL/REMTE/STP SWITCH
More informationUniversal Series Style Reference Guide
STF Universal Series Style Reference Guide SVF Accessories Dimensions P. 161 Dimensions P. 162 ST SB SV Ratio Multipliers In-Line Helical (ILH) Universal Series Universal Series STL Dimensions P. 163 SVL
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-INLINE GEAR REDUCERS & GEAR+MOTOR SOLUTIONS R SERIES FEATURES AND BENEFITS ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency
More informationHub City CleanLine Gear Drives & Mounted Bearings
& Mounted Bearings Solutions for Pharmaceutical, Meat, Poultry and Produce Processing & Washdown Applications leanline Products Features and Advantages 2 to 6 leanline Gear Drives Selection Information
More informationPARALLEL SHAFT DRIVES
ARALLEL SHAT RIVES Introductory Information...-2 re-selection Information...-3 Quick Selection Tables...-4, 5 Rating and imensions Helical Ratio ultipliers...-6 to -9 odel 22 - Single Reduction Speed Reducer...-10,
More informationGrove Gear Ironman High Efficiency Helical - Inline Gear Reducers and GEAR+MOTOR Solutions
BRAVO Grove Gear Ironman and GEAR+MOTOR Solutions R Series Features and Benefits ALL GEARING is HARDENED AND GROUND (AGMA class 10 or better) for enhanced efficiency and noise reduction. Double reduction
More informationPump/Motor Mounts. magnaloy coupling company 501 Commerce Drive Alpena, MI
Pump/Motor Mounts Leading the Industry in Quality, Service and Availability INDEX: Magnaloy General Information...2 Flexible Drive Couplings...2 SAE & Metric Mount Dimensions...3 NEMA C Motor Dimensions...4
More information+1 (800) Gear Reducers STOCK PRODUCTS CATALOG. Industry. DRIVING & Controlling WorldWideElectric.net
+1 (800) 808-2131 2017-2018 Gear Reducers STOCK PRODUCTS CATALOG ndustry DRVNG & Controlling WorldWideElectric.net VST OUR WEBSTE www.worldwideelectric.net Table Of Contents SHAFT MOUNT REDUCERS PAGE MULTPLER
More informationMotorized Pulley 320L, 320M & 320H, Ø in. (321 mm)
Mtrized Pulley 320L, 320M & 320H, Ø 12.6 in. (321 mm) Our 12.6 diameter Mtrized Pulley range fers three different perfrmance levels fr BULK applicatins: - L fr Light duty - M fr Medium duty - H fr Heavy
More informationVERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories
Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,
More informationBlue Max 2000 Vector Duty 2000:1 Constant Torque Motors
Blue Max 2000 Vector Duty 2000:1 Constant Torque Motors Applications: Blue Max motors are used in variable frequency drive applications requiring full rated torque at zero speed, utilizing Closed- or Open-Loop
More information2000HG NEW STYLE HELICAL GEAR RATIO MULTIPLIER. INSTALLATION AND MAINTENANCE MANUAL May 4, Indianapolis, Indiana (800)
2000HG NEW STYLE HELICAL GEAR RATIO MULTIPLIER INSTALLATION AND MAINTENANCE MANUAL May 4, 2017 Indianapolis, Indiana (800) 866-7973 e-mail: sales@sterlingelectric.com www.sterlingelectric.com 7997 Allison
More informationScrew jacks with travelling ball nut (Mod.B)
Screw jacks with travelling ball nut (Md.B).1 MA Series Md.B - STRUCTURAL ELEMENTS 1 2 11 16 17 1 5 4 19 15 6 18 9 20 1 10 14 8 7 12 1 - ball screw in quenched and tempered ally steel 11 - lw cver 2 -
More informationGrove Gear IRONMAN High Effiiciency Helical - Bevel Gear Reducers
Grove Gear IRONMAN High Effiiciency Helical - Bevel K Series Features and Benefits standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing spans
More informationSingle Reduction Falk Omnibox Worm Gear Drives Parts Guide
Single Reduction Falk Omnibox Worm Gear Drives Parts Guide Type W Sizes 33 thru 00 (Page of ) Introduction This parts guide is designed to assist in ordering replacement parts for standard single reduction
More informationThe Original Domed Crown unique rounded housing prevents foreign matter adherence and fluid accumulation. Energy Efficient Design
SS2000 Series Helical Inline Gear Drives B1 Integrated o-rings Laser marked nameplate provides worry-free part identification while maintaining a smooth, unetched surface 3-Jaw Coupling NEMA or IEC C-Face
More informationElectrically Released Brakes
ER Series Electrically Released Brakes Specifications Inertia lb.ft. Weight lbs. Total Model Bore Size Voltage DC Static Torque lb. ft. Max. RPM Drive Arm. & Carrier Hub Arm. & Carrier Hub Weight lbs.
More informationSECTION 2 MAGNALOY PUMP/MOTOR MOUNTS. Magnaloy Pump/Motor Mounts. magnaloy coupling company 501 Commerce Drive Alpena, MI
Magnaloy Pump/Motor Mounts SECTION MAGNALOY PUMP/MOTOR MOUNTS NOTE: Due to Magnaloy s policy of continuous improvement, specificaitons are subject to change without notice. Check with the factory or our
More informationGR SERIES DOUBLE REDUCTION WORM - WORM APPROXIMATE WEIGHTS (LBS.)
GR Series Weights GR SERIES DOUBLE REDUCTION WORM - WORM APPROXIMATE WEIGHTS (LBS.) Reducer Style GR813 GR815 GR818 GR821 GR824 GR826 GR830 GR832 GR842 GR852 GR860 GR870 GR880 GR8100 DMQ 34 38 41 46 62
More informationPump/Motor Mounts. magnaloy coupling company P.O. Box 455 Alpena, MI Leading the Industry in Quality, Service and Availability
Pump/Motor Mounts Leading the Industry in Quality, Service and Availability INDEX: Magnaloy General Information...2 Flexible Drive Couplings...2 SAE & Metric Mount Dimensions...3 NEMA C Motor Dimensions...4
More informationStainless Conveyor Drive.
Stainless Conveyor Drive UNIQUE, POWERFUL PERFORMANCE Bronze Output Shaft Bushing Safety Cover Safety Cover WashTite Shield Bronze Intput Shaft Bushing WashTite Shield Torque Arm Bracket Solid Stainless
More informationD-Sub adaptor Cable clamps for metric cable entries Cable clamps for PG cable entries Further Accessories
Cntents Accessries Page D-Sub adaptr............................................... 40.02 Han Split Hd.............................................. 40.04 Cable clamps fr metric cable entries..............................
More informationComplete Solutions for Industrial Valves
Butterfly Valves Cmplete Slutins fr Industrial Valves NEWAY VALVE Cat.n.:E-BFV-2006 T Series: Sft Seated Cncentric Butterfly Valve Figure Numbers 12 TC 1 W G WCB 338 Neway figure numbers are designed t
More information180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
More informationStainless Steel. Worm Gear Reducers. A Regal Brand
Worm Gear Reducers A Regal Brand Driven to be the Best Stainless Steel Worm Gear Reducers Advantages Polished, 316 stainless steel housing, flange and cover to withstand extreme environments Rounded cover
More informationWASHGUARD Gear Reducers & GEAR+MOTOR
Single Reduction WASHGUARD Gear Reducers & GEAR+MOTOR With gear reducers in epoxy painted cast iron, polished aluminum and stainless steel, Grove Gear offers a solution for any washdown application. GOOD
More informationGROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS
GROVE GEAR IRONMAN HIGH EFFICIENCY HELICAL-BEVEL GEAR REDUCERS K SERIES FEATURES AND BENEFITS standard double lip Seals provide extra protection against entry of contaminants or loss of lubrication. Bearing
More informationDC MOTORS NEMA FRAME SCR RATED
NEMA FRAME SCR RATED NEMA FRAME MOTORS SCR RATED High voltage permanent magnet DC motors are typically used with an SCR (thyristor) controller in applications requiring adjustable speed and constant torque
More informationFeatures / How to Order
eatures / How to Order Use alone as either a speed reducer or increaser or in combination with a 700 Series worm gear reducer to create an efficient right angle double reduction speed reducer. Close grained
More informationHelical Multiplier Series
Helical Multiplier Series Section Contents HM Series eatures / How to Order...............................................240 HM Series standard products... 241 Mounting Assemblies.... 242 Lubrication
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationC FACE MOTORS SINGLE PHASE LESS BASE CAPACITOR START GENERAL PURPOSE
C Face Motors C FACE MOTORS SINGLE PHASE LESS BASE CAPACITOR START GENERAL PURPOSE DRIP-PROOF C FACE LESS BASE SINGLE PHASE RPM App. Over- F.L. C 60 NEMA Catalog List Disc. Wgt. load Amps Dim. HP Hz Frame
More informationNEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors
NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors 70 SERIES DOUBLE C FACE BRAKE The Next Generation in Direct-Acting Brakes DIRECT REPLACEMENT for Stearns 87,700 Series Brakes DINGS TRADITIONAL
More informationSHAFT MOUNT & SCREW CONVEYOR REDUCERS. Cleveland
SHAFT MOUNT & SCREW CONVEYOR REDUCERS Cleveland SHAFT MOUNT & SCREW CONVEYOR REDUCER FEATURES Shaft Mount reducers available in sizes 2 Screw Conveyor reducers available in sizes 2 6 Suitable for AGMA
More informationContents. Han Q Technical characteristics Han Q 5/ Han Q 5/ Technical characteristics Han Q 7/
Cntents Page Technical characteristics 5/0.............................. 13.10 5/0.................................................. 13.11 Technical characteristics 7/0.............................. 13.14
More informationHow To Use Maximum Rating Tables
How To Use for Double Reduction Gear Reducers are shown on pages 193-196. 1 Locate the Input RPM and Output RPM columns in the charts beginning on page 204. Scroll down the Input RPM column to locate a
More informationDrive Catalog HM400. The Next Generation of Gearficient Drives.
Drive Catalog HM400 The Next Generation of Gearficient Drives. MAX Drive 65CZ Optional Shafts Assembled Hera-MAX 35 MAX Drive 182TCZ Hera 35 Hera Gear 45ES Assembled Hera-MAX 45ES IFC TABLE OF CONTENTS
More informationCHILL CAST BRONZE WORM GEAR, HARDENED STEEL WORM
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 GF5032BG F-932-50-B7-G Baldor Electric CO. Catalog Number Manufacturer Description Weight per unit Product Category Features
More information2000RA WORM GEAR REDUCER
2000RA WORM GEAR REDUCER INSTALLATION AND MAINTENANCE MANUAL February 22, 2010 Indianapolis, Indiana (800) 866-7973 Hamilton, Ontario (800) 809-0330 e-mail: sales@sterlingelectric.com www.sterlingelectric.com
More informationFABRICATED AIRLOCK. Installation, Operation & Maintenance Instructions 312 SOUTH HWY. 73, PO BOX 398 FALLS CITY, NE
FABRICATED AIRLOCK Installation, Operation & Maintenance Instructions 31 SOUTH HWY. 73, PO BOX 398 FALLS CITY, NE 68355-0398 800-500-9777 Revision Date 06/7/08 Index Introduction... 3 Receiving Your Equipment...
More informationMAX-VH. Vertical Hollow Shaft Motors
MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size
More informationFor Dynamic Stopping and Cycling Applications
Electrically Released Brakes For Dynamic Stopping and Cycling Applications Warner Electric s modular design brakes and clutch/brake units offer material handling system users a high performance alternative
More informationNow you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products.
ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products. Series W Precision Servo Gearhead Output torque up to 8,500
More informationJRP Motors 1 and 3 Phases TEFC 56C Stainless and Rolled Steel Motors
JRP Motors and 3 Phases TEFC 56C Stainless and Rolled Steel Motors /3-3 HP PH & 3PH TEFC 60 Hz AC Foot Mounted and Round Body C-Face Motors Features Inverter Duty Rated: 3:CT & 5:VT (3-Phase only) Service
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationMotorized Pulley 138E, Ø 138 mm
Mtrized Pulley 138E, Ø 138 mm Mtrized Pulley 138E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 138 mm nly. With a min RL f 300 mm and and pwers ranging frm 0.10 t 075kW
More informationIntroduction to Armature Actuated Brakes (AAB) Operating Principle. Engaged Condition (power off) Disengaged Condition (power on)
Introduction to Armature Actuated Brakes (AAB) The Armature Actuated Brakes are spring-set, electrically released, friction devices, which develop holding and braking torque in the absence of electrical
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationWORLDWIDE GEAR REDUCERS Inline Helical Speed Reducers Product Overview / Maximum Ratings
WORLDWIDE GEAR REDUCERS Inline Helical Speed Reducers Product Overview / Maximum Ratings Product Overview 2:1-120:1 ratios (other ratios available as custom orders) sizes - Horsepower range from 1/4 to
More information"K" Series Food and Beverage Duty Reducer
"K" Series Food and Beverage Duty Reducer "K" Series Food and Beverage Duty Reducer Installation and Maintenance Guide 16 STOBER Drives Inc. Food and Beverage Duty Reducer Maintenance Guide www.stober.com
More informationPowerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
More informationHigh Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167
More informationmodel HP Servo AccuDrive Family of Products
model 09090.01 AccuDrive Family of Products Series W Model RG Series S Series P Series E/LE ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
Parallel Shaft PZ Series QUICK REFERENCE Stock Sub-FHP P240 & P300 Series AC Single & Three Phase Single Phase 115V 12-100 In-Lbs Page 102 Single Phase 115/230V 43-391 In-Lbs Page 103 DC SCR & Low Voltage
More informationHERA. Stainless Steel. High-Efficiency Right Angle 90% EFFICIENCY 2X MORE TORQUE NO-HASSLE REPLACEMENT FOR WORM GEAR DRIVES
Stainless Steel HERA High-Efficiency Right Angle PATENTED PAT. http://rbcm.biz/q=f3a63 A Regal Brand 90% EFFICIENCY 2X MORE TORQUE NO-HASSLE REPLACEMENT FOR WORM GEAR DRIVES Why Stainless Steel HERA? Up
More informationNEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
More informationIEC Metric Motors DC Metric Motors Metric (IEC) Frame - SCR Rated - IP54
Motors Motors Gearmotors Metric Motors Metric Motors Metric () - SCR Rated - IP54 Application Notes: Please note that one or more of the mounting kits must be used with motors of these frame sizes. See
More informationWheel-Horse Products, Inc. Lawn and Garden Tractors MODELS SOUTH BEND, INDIANA 46614
Lawn and Garden Tractrs MODELS Wheel-Hrse Prducts nc. SOUTH BEND NDANA 66 7 t.) S 8!i 77 ~ 07 TRANSMSSON 7 66 7 78. _---6 PARTS LST FOR 07 TRANSMSSON lem Part 86 Descriptin Case R.H. Ball Bearing ).0.
More informationTABLE OF CONTENTS GENERAL INFORMATION...84 NEMA C-FACE BOLT CIRCLE DIMENSIONS...85 PERMANENT MAGNET 1/12 HP TENV...85
TABL CTTS GRAL IRMATI...84 MA C-AC BLT CIRCL IMSIS...85 PRMAT MAGT /2 HP TV...85 PRMAT MAGT /6-5 HP TV A TC...86-87 PRMAT MAGT (WASHW)...88 SHT W P RIPPR /6-5 HP...89 SHT W TC /6-5 HP... SHT W XPLSI PR
More informationDesign features of models K and AC brakes. K DC-Powered Brake. AC Three phase Powered Brake
NEMA C-Face spring applied fail-safe brakes model K and AC mounted brakes with NEMA 2 housing are designed specifically to interchange with Stearns and Dings models as shown in Table1. Design features
More informationCONTENTS. DODGE QUANTIS Gold Gearmotors
CONTENTS DODGE QUANTIS Gold Gearmotors QUANTIS Features / Benefits........................................................... QG-3 How to Order / Nomenclature...................................................
More informationLEESON Your Complete Source For Quality DC Motors And More
LEESON Your Complete Source For Quality DC Motors And More Today s LEESON offers one of the industry s broadest and most accessible ranges of AC and DC commercial and industrial electric motors, gearmotors,
More informationTHE INNOVATIVE TEAM IN POWER TRANSMISSION
S m a l l WONDER THE INNOVATIVE TEAM IN POWER TRANSMISSION 2 1 2 The output shaft is constructed from quality C40 steel for maximum output torque. The corrosion-resistant aluminum surface cools easily
More informationACCUDRIVE PRECISION PRODUCTS
ACCUDRIVE SERIES S ACCUDRIVE PRECISION PRODUCTS Now you can get design flexibility and lasting performance from our complete family of AccuDrive Precision Products. Series W Precision Servo Gearhead Output
More informationMotorized Pulley 165E, Ø 165 mm
Mtrized Pulley 165E, Ø 165 mm Mtrized Pulley 165E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 165 mm nly. With a min RL f 400 mm and and pwers ranging frm 0.11kW t 1.5kW
More informationSUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS
SUB-FHP AC GEARMOTORS PARALLEL SHAFT GEARMOTORS 12-100 In-Lbs Single phase gearmotors, totally enclosed for continuous duty, general purpose applications. Permanent TEFC split capacitor designs are rated
More informationQUICK REFERENCE Stock Sub-FHP Gearmotors
QUICK REFERENCE Stock Sub-FHP AC Single & Three Phase DC SCR & Low Voltage Parallel Shaft PZ Series Single Phase 115V 12-100 In-Lbs Page 166 DC SCR 90 & 180V 10-100 In-Lbs 36-100 In-Lbs torque Page 156
More informationAir Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:
Air Cylinders Precision Engineered Fine Quality Excellent Prices Advanced Design connects fluid power to industrial automation Tel: 650-856 8833 www.stcvalve.com H1 83 Contents Air Cylinder Numbering System
More informationMedium Voltage Motors and Soft Starters
TEFC Severe Duty Motors TEFC Motors 2300 4160V................................................. A-252 TEFC Motors Add-On Modifications............................................. A-253 TEFC 2300V - Electrical
More informationSeries 2000 Inline Helical Gear Drives & Gear Motors
A L T R A I N D U S T R I A L M O T I O N Series 2000 Inline Helical Gear Drives & Gear Motors INTRODUCING NEW GEARING SOLUTIONS FROM BOSTON GEAR This well recognized Altra Industrial Motion brand has
More informationSHAFT MOUNT REDUCERS. For Additional Models of Shaft Mount Reducers See Sections F & J G-1
SHAFT MOUNT REDUCERS PowerTorque Features and Description... -2 Nomenclature... -4 Selection Instructions... -5 Selection By Horsepower... -7 Mechanical Ratings... -12 Dimensions... -14 Accessories...
More informationTORQUE LIMITERS 211CDW 221CDW 231CDW 241CDW. Ball Detent Style THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC.
TORQUE LIMITERS Ball Detent Style 211CDW 221CDW 231CDW 241CDW THE ULTIMATE PROTECTION CARLSON-DIMOND & WRIGHT, INC. CDWdrives Torque Limiters Protect your equipment from costly downtime! 1 2 3 4 7 5 Features
More informationCONTENTS. Adaptable TIGEAR Right Angle Speed Reducers. Specification... How To Order...
CONTENTS Right Angle Speed Reducers Features/Benefits... G4--2 Specification... How To Order... G4--4 G4--5 Nomenclature Easy Selection...... G4--5 G4--6 Selection/Dimensions... Mounting Positions... G4--10
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationTechnical Information
5 11 10 1 8 1 19 1 10 1 4 1 1 1 5 8 1 14 High Efficiency 1 1 19 14 15 1 18A 18B 4 0 18B 18A 1 MODEL B81-8100 (Basic SINGLE REDUCTION BASIC SINGLE REDUCTION UNIT (B-STYLE) ITEM # DESCRIPTION 1 HOUSING PIPE
More informationGearmotors Parallel Shaft - PZ Series - DC
90 & 180 - TENV - PZ Series Price Model Frame P X XL XH 4 40 1 40 M1115002.00 496 985.620 PZ5-30A 450 90 0.46 155 3.00 3.25 9.28 7.72 S, US 40 1 40 M1125046.00 496 985.623 PZ5-30A 450 180 0.19 155 3.00
More informationElectric Motors
SELECT Electric Motors To compete in today s global marketplace, you need a supplier who can provide electric motors that meet your quality, cost, and delivery requirements. That is why you rely on IDC
More informationCA1600 Effective Date: August, 2004
Gear Products CA1600 Effective Date: August, 2004 Why Baldor? For over 80 years, Baldor has strived to provide customers with the best value and reliability in industrial products. To be considered by
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationUSE ZERK FITTING FOR VERTICAL SHAFT POSITIONS ATTACH TO THROW-AWAY PLUG D 1.50
combo_renewal_parts Page 45 Thursday, October 4, 2004 4:36 PM SOLID SHAFT - SIZES C50-C350.50 SHELL PINION DESIGN 7.5 ONLY 2 3 29 28 27 26 25 24 23 22 5 4 5 6 30 7 8 USE ZERK FITTING FOR VERTICAL SHAFT
More informationTable of Contents. Introduction 1 Brake Selection 2
Table of Contents Introduction 1 Brake Selection 2 Brake Basic Motor Frame Size () Enclosure Style Construction Series Pg Small AC & DC motors 3/8, 3/4 NEMA 2 End Mount Steel 40 40000-012 3 48C 1.5-6 NEMA
More informationViking In-Line Helical Gear Reducers
Page 615.1 Gear Ratio Range: (varies by reducer size) Output Speeds (with 1750 rpm input) Reducer Horsepower Range: From 2.63:1 to 38.0:1 (Varies by reducer size) 46 665 rpm.5 HP (.37 kw) to 350 HP (261
More informationPC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone A DON RANDOLPH COMPANY Fax
PC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone 806-746-6926 A DON RANDOLPH COMPANY Fax 806-746-6518 PRODUCT CATALOG PC-C5 GEAR DRIVE SELECTION THE FOLLOWING INFORMATION
More informationForged Fittings Socket Weld And Threaded
Frged Fittings Scket Weld And Threaded Types Equal tee / Reducing Tee / Full Cupling / Half Cupling / Street Elbw / Bull Plug / Bss / Unin (Male/Female) / 90 Elbw / 5 Elbw / Equal Crss / Reducing crss
More informationMT Pressure Switch INSTALLATION AND OPERATING INSTRUCTIONS. Kaustubha Udyog (Orion Instruments)
PRESSURE SWITCHES PRESSURE DIFFERENCE SWITCHES VACUUM SWITCHES Frm 1.5 mbar t 600 bar INSTALLATION AND OPERATING INSTRUCTIONS MT Pressure Switch Cnstructin The pressure switch is hused in a tugh Aluminium
More informationPower Transmission solutions for every
Power Transmission solutions for every IRONMAN GR Series Stainless Steel ironman High Efficiency Gear Reducers washguard Recognized throughout the world as a leader in industrial-duty gear reducers, GEAR+MOTORS
More information2000HG R-SERIES IN-LINE HELICAL GEAR REDUCER
2000HG R-SERIES IN-LINE HELICAL GEAR REDUCER INSTALLATION AND MAINTENANCE MANUAL April 10, 2018 7997 Allison Avenue, Indianapolis, IN 46268 Website: www.sterlingelectric.com (800) 866-7973 FAX (317) 872-0907
More information