Water Movement & Dewatering Hose & Equipment

Size: px

Start display at page:

Download "Water Movement & Dewatering Hose & Equipment"

Mary Tucker
5 years ago
Views:

1 Water Movement & Dewatering Hose & Equipment RedL Distributors Ltd. Contact Jamie Ludwig C: , P:

Barrel Style Deployer Built with operators safety in mind Free

system Full lengths can be wound up without following the hose 1500

Torque Accommodates 660 ft of 8", 10" or 12" layflat hose Free

2 Barrel Style Deployer Built with operators safety in mind Free wheeling or hydraulic deployment option Double direct sprocket drive system Full lengths can be wound up without following the hose 1500 lbs. 8' wide, 4' long, 3' high 2300 ft lbs. Torque Accommodates 660 ft of 8", 10" or 12" layflat hose Free wheeling hose reel stands Stackable stands Neoprene replaceable wear parts 2

Performer Deployer Built with operators safety in mind Free

drive system Full lengths can be wound up without following the

3 Performer Deployer Built with operators safety in mind Free wheeling or hydraulic deployment option Double direct sprocket drive system Full lengths can be wound up without following the hose 1000 lbs. 5' wide, 6' long, 3' high 2300 ft lbs. Torque Accommodates 660 ft of 8", 10" or 12" layflat hose Free wheeling hose reel stands Stackable stands Neoprene replaceable wear parts 3

4 Foldup Road Crossing Folds up and unfolds in minutes Coffin Style, Over Top Style & Split Style Engineered for Oil Patch traffic 16' X 16' open 12' X 16' open 20' X 16' open 24' X 16' open Filter Pod Trailers sales@redl.com 4

5 Floating Pump Screens Fish screen suction cages Float cages Sub Pac suction cages 5

6 Pump Packages & Custom Built Manifolds 6

PumpFlex Composite Hose replaces the heavy rubber suction and discharge hoses, commonly used in the pump rental market, that are extremely heavy and hard to maneuver and due to the small bend radius

7 Water Suction & Discharge Hose Versiflo 150 Water S&D Application: Tube Reinforcement Temperature Branding (Spiral) Couplings in PumpFlex Composite Hose Specifically designed for the Pump Rental Industry. PumpFlex Composite Hose replaces the heavy rubber suction and discharge hoses, commonly used in the pump rental market, that are extremely heavy and hard to maneuver and due to the small bend radius of the rubber hose, can also kink prematurely. PumpFlex suction and discharge hose provides extreme flexibility, lightweight handling and excellent service life. Excellent for the transfer of water, dirty oily water and light chemicals. I.D. O.D. W.P. in. in. psi Advantages I.D. mm Generalpurpose water suction and discharge for medium to heavyduty applications. Can be used in Lasso applications. Black EPDM synthetic rubber (wrapped finish) Spiral plied synthetic fabric with wire helix 25 F to 200 F (32 C to 93 C) Example: Continental ContiTech Versiflo 150 Water Suction & Discharge Contact RedL for proper fitting recommendation and coupling procedure. B.P. psi Nom. O.D. in. mm Bend Radius in psi Weight lb./ft W.P. MPa # Flange & Coupling lb. ea Rated for full vacuum Crimped couplings Absorbs pump pulsations Less manpower to install than rubber hose Flanges crimped each end Easy to package for shipping & storage Max. length 100 ft (10 = 50 ft) Other fitting combinations available. Standard lengths 10 ft & 20 ft. with CS 150lb fixed x floating flanges Operating Temperature 40º F to 212º F (40º C to +80º C) Consult RedL for chemical compatibility before use. Not suggested for use in ship to shore applications, marine dock, crude oil, bunker oil or heavy viscous product applications. For these applications, contact RedL 6" x 20 ft. 600 PSI Water Jetting Hose PART # KIN1C296MPXMP A premium quality, robust hose, used in high pressure water discharge applications. An exceptionally flexible hose that is easy to handle. I.D.: 6" O.D.: 6.67" WP: 600 psi Weight: 4.46 lbs./ft. Ends: 6" Male NPT Tube: EPDM/SBR Temperature : 40 F to F Cover: Black Abrasion resistant EPDM/SBR blend Reinforcement: 4 Ply high tensile synthetic cord. Bend Radius in. mm Vacuum HG in. mm sales@redl.com 7 lb./ft Weight kg/m

6 m 2 ) of area surface, with 62% of that being open wire mesh Wire mesh #8 Stainless Steel, 3/16'' (4.

8 NEW Aluminum Round Fish Screen Approved by Fisheries and Oceans Canada 36'' High X 36'' (91.4 cm) Diameter Screen is 12'' (30.5 cm) off the ground Weight 250 lbs. (113 Kg) 28 square feet (2.6 m 2 ) of area surface, with 62% of that being open wire mesh Wire mesh #8 Stainless Steel, 3/16'' (4.8 mm) hole size Fracflo Layflat Hose Pincher Application: to cut off the flow of water on the 8 and 10 FracFlo hose by securely pinching the hose down to allow installation of a new end or mender. 4813/16" H x 301/4" W x 4" D sales@redl.com 8

Polyurethane Fracflo Layflat Hose Cover and Lining: Polyurethane smooth cover Reinforcement: High tensile strength synthetic weave Application: Pumping of Frac water, flow back water, sludge and

Resistant to oil and chemicals and UV Stabilized.

9 Polyurethane Fracflo Layflat Hose Cover and Lining: Polyurethane smooth cover Reinforcement: High tensile strength synthetic weave Application: Pumping of Frac water, flow back water, sludge and most liquids Lengths: 50', 660', 1400' Temperature: 50 to 80 Abrasion: >15000 cycles, Extra abrasion resistance for rugged terrain and extreme conditions. Resistant to oil and chemicals and UV Stabilized. L/S FLOW RATE m3/h GPM HOSE FRICTION LOSS (PSI /100 ft) 8" " " Fracflo Layflat Hose Color Options 9

10 ZYFIRE Throughthe weave TPU Hose Data I.D. tolerance Wall Thickness Working Pressure Bursting Pressure WEIGHT Elongation at WP % Expansion at WP % temperature range tensile strength Inches mm mm Inches mm PSI PSI LBS/FT tolerance LBS/FT kgs/m tolerance kgs/m max ZY max ZY kgs 2" ± ± ± ± ± ± ± ± " ± ± ± ± " ± ± ± ± ± ± ± ± " ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± " ± ± ± ± ± ± ± ± " ± ± ± ± ± ± ± ± " ± ± ± ± ± ± ± ± " ± ± ± ± " ± ± ± ± * All above technical parameters are for reference, details please confirm with RedL

Polyurethane Fracflo Layflat Hose Couplings available in 8" 12".

8" # FRACFLOVICFTG128 (set of 2) 10" # FRACFLOVICFTG160 (set of 2) illustrated 12" # FRACFLOVICFTG192

10" clamp, 4 lbs. Part # M3SLV8 7" 8" insert, 3 lbs. Part # M3SLV10 10" insert, 4 lbs.

Burst Pressure (PSI) Material Construction sales@redl.

Part # M3MCS10 10 mender set, 22 lbs. Specifications Rib spacing 0.

11 Polyurethane Fracflo Layflat Hose Couplings available in 8" 12". 8" and 10" are 300 psi WP, 900 BP, 12 is 200 psi WP, 600 BP. 8" # FRACFLOVICFTG128 (set of 2) 10" # FRACFLOVICFTG160 (set of 2) illustrated 12" # FRACFLOVICFTG192 (set of 2) D d Shug Clamps Part # M3CL8 Part # M3CL10 Shug Inserts L b 7" 8" clamp, 3 lbs. 10" clamp, 4 lbs. Part # M3SLV8 7" 8" insert, 3 lbs. Part # M3SLV10 10" insert, 4 lbs. Shug Coupler Gaskets Part # M3GSK8 7" 8" gasket, 0.1 lbs. Part # M3GSK10 10" gasket, 0.1 lbs. Size D (mm.) d (mm.) b (mm.) L (mm) Service Pressure (PSI) Burst Pressure (PSI) Material Construction Weight(lbs) 10" Aluminum Fracflo High Pressure Couplings Contact RedL for additional information Size Service Pressure (PSI) Burst Pressure (PSI) Material Construction sales@redl.com " Aluminum/Forged Mender Sets Part # M3MCS8 8 mender set, 19 lbs. Part # M3MCS10 10 mender set, 22 lbs. Specifications Rib spacing center to center Double bolt style, stainless 6061T6 extruded aluminum Knurled ribs for holding strength Please add A to part # for Hardcoat anodized coating Shug Coupler Sets Part # M3CS8 8 shug coupler set, 30 lbs. Part # M3CS10 10 shug coupler set, 36 lbs. Specifications Rib spacing center to center Double bolt style, stainless 6061T6 extruded aluminum Knurled ribs for holding strength Please add A to part # for Hardcoat anodized coating

US Coupling style HF Heavy Duty Fittings M3CSHFF8HD 8" HF/Shug coupling, o'ring insert, HD segment set (3/8" nut and bolt) M3CS8HD 8" HF/Shug coupling, regular insert, HD segment

segment set (1/2" nut and bolt) M3CSHF12HD 12" HF/Shug coupling, regular insert, HD segment set (1/2" nut and bolt) M3CS12HHD 12" Shug/HF gasket coupling, regular instert, HD clamp

Clamps for Shug & HF Fittings *When using our HF & shug fittings with this HD clamp, the total assembly is rated for 300 PSI.

clamp 300 PSI M3CL10HD 10" Shug/HF clamp 300 PSI M3CL10HFHD 10" HF clamp 300 PSI M3A8HFM10V Heavy Duty Shug / HF Victaulic Adapters rated 300 psi (tested pressure 1000 psi) 6061T6

male X 10" Victaulic adapter M3A10SH8V M3A10SH10V 10" Shug X 8" Victaulic adapter 10" Shug X 10" Victaulic adapter M3A10HFM8V M3A10HFM8V 10" HF male X 8" Victaulic adapter

12 US Coupling style HF Heavy Duty Fittings M3CSHFF8HD 8" HF/Shug coupling, o'ring insert, HD segment set (3/8" nut and bolt) M3CS8HD 8" HF/Shug coupling, regular insert, HD segment set (3/8" nut and bolt M3CSHFF10HD 10" HF coupling, o'ring insert, HD segment set (1/2" nut and bolt) M3CL8HD 8" Shug/HF clamp 300 PSI M3CSHF10HD 10" HF coupling, regular insert, HD segment set (1/2" nut and bolt) M3CSHF12HD 12" HF/Shug coupling, regular insert, HD segment set (1/2" nut and bolt) M3CS12HHD 12" Shug/HF gasket coupling, regular instert, HD clamp M3SLV8HF 8" HF insert with o'rings M3SLV10HF 10" HF insert with o'rings M3SLV10 10" HF/Shug insert without o'rings M3GSK8 8" Shug/HF gasket M3GSK10H 10" Shug/HF gasket Heavy Duty Clamps for Shug & HF Fittings *When using our HF & shug fittings with this HD clamp, the total assembly is rated for 300 PSI.Note: Make sure Victaulic clamp bolts are sufficiently tightened RedL will not be liable for clamp failure from improper installation M3CL10HF 10" HF clamp set M3CL8HD 8" Shug/HF clamp 300 PSI M3CL10HD 10" Shug/HF clamp 300 PSI M3CL10HFHD 10" HF clamp 300 PSI M3A8HFM10V Heavy Duty Shug / HF Victaulic Adapters rated 300 psi (tested pressure 1000 psi) 6061T6 extruded aluminum Anodizing, MILA8625 Type III Class 1 (optional) Victaulic clamp (not included in assembly) M3A8HFM8V 8" HF/Shug male X 8" Victaulic adapter M3A8HFM10V 8" HF/Shug male X 10" Victaulic adapter M3A10SH8V M3A10SH10V 10" Shug X 8" Victaulic adapter 10" Shug X 10" Victaulic adapter M3A10HFM8V M3A10HFM8V 10" HF male X 8" Victaulic adapter M3A10HFM10V 10" HF male X 10" Victaulic adapter M3A10HFM12V 10" HF male X 12" Victaulic adapter *Note: Make sure Victaulic clamp bolts are sufficiently tightened RedL will not be liable for clamp failure from improper installation sales@redl.com 12

Victaulic QuickVic Rigid Coupling Style 107N Pipe Material Carbon steel, Stainless steel Max. W.P. Pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 750 psi/5171 kpa.

Provides a rigid pipe joint designed to restrict axial or angular movement. Size Schedule 10 Schedule 40 Nominal Actual OD inches/dn inches / mm 6 / DN150 8 / DN200 10 / DN250 12 / DN300 6.625 / 168.

13 Victaulic QuickVic Rigid Coupling Style 107N Pipe Material Carbon steel, Stainless steel Max. W.P. Pressures ranging from full vacuum (29.9 in Hg/760 mm Hg) up to 750 psi/5171 kpa. Working pressure dependent on material, wall thickness and size of pipe. Temp. Operating Temperature is dependent on gasket selection. Function Joins carbon steel and/or stainless steel pipe. Provides a rigid pipe joint designed to restrict axial or angular movement. Size Schedule 10 Schedule 40 Nominal Actual OD inches/dn inches / mm 6 / DN150 8 / DN / DN / DN / / / / Wall Thickness inches / mm / / / / 4.6 Maximum Joint Working Pressure 5 psi / kpa 500 / / / / 1375 Maximum Permissible End Load 5 lb / N / / / / Wall Thickness inches / mm / / / / 9.5 Maximum Joint Working Pressure 5 psi / kpa 700 / / / / 2750 Maximum Permissible End Load 5 lb / N / / / / Working Pressure and End Load are total, from all internal and external loads, based on ANSI B36.10 sized carbon steel pipe, grooved in accordance with Victaulic specifications. Contact RedL for performance on other pipe. A union at every joint for easy disassembly & relocation without any large equipment Rugged ductile iron construction built to last longer & provide more use than the aluminum constructed launchers maintaning a lower cost per use Less nuts and bolts vs flanges Easy transition to HDPE, steel or lay flat hoses eliminating tools and transitions Victaulic Components 8'' Y Lat 8'' MS300 Butterfly Valve 8'' Gate Valve 8'' Vic Cap 8'' 107 s (3) Victaulic Total Weight Victaulic Components 10'' Y Lat 10'' MS300 Butterfly Valve 10'' Gate Valve 10'' Vic Cap 10'' 107 s (3) Victaulic Total Weight Weight (lbs) Weight (lbs) Flanged Components Weight (lbs) Flanged Y Lateral Wafer Valve, Vic Flange adapter nippler Flanged Gate Valve Blind Flange 45.0 Bolt up for Blind 6.8 Flanged Total Weight Flanged Components Weight (lbs) Flanged Y Lateral Wafer Valve, Vic Flange adapter nippler Flanged Gate Valve Blind Flange 70.0 Bolt up for Blind 15.3 Flanged Total Weight sales@redl.com 13

Victaulic Vic300 MasterSeal Butterfly Valve Series 761 Black Alkyd

Gear Operator V080761ST3 8'' V100761ST3 10'' Gate Valve Series 771H

Groove, used when positive shut off is required and a quick visual

V080771P01 8'' V100771P01 10'' Victaulic Model 50 Concentric Reducer

FF96050P00 10''x8'' Victaulic Model 52 Threaded Reducer Orange Enamel

Victaulic Model 10 90º Elbow Orange Enamel Painted Ductile Iron, grooved

Enamel Painted Ductile Iron, grooved ends F080011P00 8 F100011P00 10

Designed to join plain end HDPE pipe Victaulic Model 30 45º Lateral

F100030P00 10'' Victaulic Model 60 Cap Orange Enamel Painted Ductile

Victaulic Model 45R Adapter Nipple Black Carbon Steel, Grooved End X

Series 761 Victaulic Vic300 MasterSeal Butterfly Valve Black Alkyd

V080716PT0 10'' Series 716 Check Valve feature an elastomer encapsulated

IPS Transition Coupling for HDPEtoSteel Pipe Designed to provide a

sized piping system components. L080907PT0 8'' sales@redl.com 14 www.

14 Victaulic Vic300 MasterSeal Butterfly Valve Series 761 Black Alkyd Enamel Coated, 300PSI, Grade T Nitrile seat & seal, Ductile Iron body, Gear Operator V080761ST3 8'' V100761ST3 10'' Gate Valve Series 771H Outside Stem & Yoke (OS&Y) designed for service up to 250PSI, Groove x Groove, used when positive shut off is required and a quick visual indicator of open/closed position is required. V080771P01 8'' V100771P01 10'' Victaulic Model 50 Concentric Reducer Orange Enamel Painted Ductile Iron, grooved ends FF47050P00 8''x6'' FF96050P00 10''x8'' Victaulic Model 52 Threaded Reducer Orange Enamel Painted Ductile Iron, grooved x threaded end FF47052P00 8'' x 6'' Victaulic Model 10 90º Elbow Orange Enamel Painted Ductile Iron, grooved ends F080010P00 8 F100010P00 10 Victaulic Model 11 45º Elbow Orange Enamel Painted Ductile Iron, grooved ends F080011P00 8 F100011P00 10 Victaulic RefusetoFuse Coupling for Plain End HDPE Pipe L080905PT0 8'' Designed to join plain end HDPE pipe Victaulic Model 30 45º Lateral Orange Enamel Painted Carbon Steel, grooved ends F080030P00 8'' F100030P00 10'' Victaulic Model 60 Cap Orange Enamel Painted Ductile Iron Cap With 2'' Tap, Grooved End F080060P20 8'' FF86060P01 10'' Victaulic Model 45R Adapter Nipple Black Carbon Steel, Grooved End X Flanged, Class 150 FF47045PRF 8''x6'' FF96045PRF 10''x8'' V080761ST2 8'' Series 761 Victaulic Vic300 MasterSeal Butterfly Valve Black Alkyd Enamel Coated Ductile Iron, 14'' lever handle, 300PSI V080716PT0 8'' V080716PT0 10'' Series 716 Check Valve feature an elastomer encapsulated disc and a electroless nickel plated seat, 300PSI Victaulic Style 907 IPS Transition Coupling for HDPEtoSteel Pipe Designed to provide a single transition from plain end HDPE pipe (SDR 717) to grooved steel sized piping system components. L080907PT0 8'' sales@redl.com 14 Victaulic Style 904 Flange Adapter for HDPEtoFlanged Pipe Sizes from 3 8 IPS HDPE to 3 8 IPS ANSI Class 150 Flange. For use on plain end HDPE pipe. L080904PTE 8'' SDR 11 L080904PTS 8'' SDR 17

Collapsible Secondary Containment Berms can be used to contain spills and leaks from vehicles, machinery, tanks, drums and other industrial equipment.

oz/yd2 (1020 gsm) Chemical & Hydrocarbon Resistant polyester Lightweight, flexible, compact folds up for storage and easily portable for transport.

15 Collapsible Secondary Containment Berms can be used to contain spills and leaks from vehicles, machinery, tanks, drums and other industrial equipment. RF welded construction made from your choice of three (3) heavy duty industrial fabrics: YELLOW: 22 oz/yd2 (750 gsm) PVC coated polyester ORANGE: 28 oz/yd2 (950 gsm) PVC coated polyester BLACK: 30 oz/yd2 (1020 gsm) Chemical & Hydrocarbon Resistant polyester Lightweight, flexible, compact folds up for storage and easily portable for transport. Simple and easy to clean and maintain, reusable No set up unfold and use immediately! Part numbers below represent YELLOW fabric, consult RedL for price & delivery on ORANGE & BLACK. Part Number PSP PSP PSP PSP PSP PSP L x W x H 24 x 24 x 4 24 x 24 x 6 36 x 36 x 4 36 x 36 x 6 48 x 48 x 4 48 x 48 x 6 Capacity (90%) 34 L (9 USG) 51 L (14 USG) 77 L (20 USG) 115 L (31 USG) 136 L (36 USG) 204 L (54 USG) FOAM SIDE WALL BERMS, additional sizes & custom sizes available! Contact RedL for price & delivery Compact Wall Berms This specialized berm is compact, lightweight, and portable it features struts in sleeves along the sidewall. Design Features: Fully welded construction made from 28 oz/yd2 (950 gsm) COPOLYMER 2000 fabric, black Berm sidewall struts are permanently attached, no parts to misplace or lose Compact design, rolls up for easy storage on trucks / hazmat vehicles 12 inch high walls provide high storage volume (up to triple capacity of similar footprint foam side wall berms) 12 & 15 sidewalls sizes available, Custom logo / silkscreening available, Optional drain fittings and handles Custom sizes & configurations available upon request Easy Assembly. No Tools Required Compact Size for Easy Storage On Site Spill Containment Part Number PSP PSP PSP PSP PSP PSP L x W x H 4 x 6 x 1 6 x 6 x 1 10 x 10 x 1 12 x 60 x 1 15 x 50 x 1 15 x 66 x 1 Capacity 680 L (180 USG) 1,020 L (270 USG) 2,830 L (750 USG) 20,380 L (5,385 USG) 21,235 L (5,610 USG) 28,030 L (7,405 USG) sales@redl.com 15

Rapid Rise Berms This specialized berm allows for easy entry and exit of vehicles or equipment. Sidewalls remain down during normal operations, loading and unloading.

In the case of a spill, the foam ring around the top perimeter of the berm rises with the level of the spilled liquid Fully welded construction made from 28 oz/yd2 (950 gsm) COPOLYMER 2000 fabric,

storage volume (up to triple capacity of similar footprint foam side wall berms) Drive In / Out, No Set Up Foam Ring Rises With Liquid Level Simple And Easy To Deploy Part Number PSP2004014

L (2,335 USG) 21,235 L (5,610 USG) 28,030 L (7,405 USG) LRod Berms These LRod secondary containment berms are fully collapsible, and can be rapidly deployed.

RF welded construction made from 30 oz/yd2 (1020 gsm) Chemical & Hydrocarbon Resistant polyester fabric, black Aluminum LRods used to support the berm walls, but easily foldable for entry / exit and

PSP2003003 PSP2003004 PSP2003005 PSP2003006 PSP2003007 PSP2003008 PSP2003009 L x W x H 10 x 10 x 6 10 x 15 x 6 8 x 12 x 12 8 x 8 x 12 8 x 10 x 12 10 x 10 x 12 10 x 15 x 12 10 x 20 x 12 15 x 15 x 12

16 Rapid Rise Berms This specialized berm allows for easy entry and exit of vehicles or equipment. Sidewalls remain down during normal operations, loading and unloading. Vehicles and equipment can drive in and out with no setup or takedown required. In the case of a spill, the foam ring around the top perimeter of the berm rises with the level of the spilled liquid Fully welded construction made from 28 oz/yd2 (950 gsm) COPOLYMER 2000 fabric, black Lays flat until spill occurs then foam ring around top perimeter will rise with fluid level No tripping hazards, simple and easy to deploy, clean and maintain 12 inch high walls provide high storage volume (up to triple capacity of similar footprint foam side wall berms) Drive In / Out, No Set Up Foam Ring Rises With Liquid Level Simple And Easy To Deploy Part Number PSP PSP PSP PSP PSP PSP L x W x H 4 x 6 x 1 6 x 6 x 1 10 x 10 x 1 12 x 26 x 1 15 x 50 x 1 15 x 66 x 1 Capacity 680 L (180 USG) 1,020 L (270 USG) 2,830 L (750 USG) 8,830 L (2,335 USG) 21,235 L (5,610 USG) 28,030 L (7,405 USG) LRod Berms These LRod secondary containment berms are fully collapsible, and can be rapidly deployed. Aluminum Lrods are used at regular intervals to support the walls of the berms, but are easily folded to allow for entry/exit of vehicles or machinery. RF welded construction made from 30 oz/yd2 (1020 gsm) Chemical & Hydrocarbon Resistant polyester fabric, black Aluminum LRods used to support the berm walls, but easily foldable for entry / exit and for storage Simple and easy to clean and maintain, reusable Fold Down LRods For Easy Entry / Exit 6, 12, or 15 Inch High Berm Sidewalls Rapidly Set Up With No Tools Part Number PSP PSP PSP PSP PSP PSP PSP PSP PSP L x W x H 10 x 10 x 6 10 x 15 x 6 8 x 12 x 12 8 x 8 x 12 8 x 10 x x 10 x x 15 x x 20 x x 15 x 12 Capacity 1275 L (340 USG) 1915 L (510 USG) 2450 L (650 USG) 1630 L (430 USG) 2040 L (540 USG) 2550 L (675 USG) 3825 L (1010 USG) 5100 L (1350 USG) 5740 L (1520 USG) Part Number PSP PSP PSP PSP PSP PSP PSP PSP PSP L x W x H 20 x 20 x 12 8 x 8 x 15 8 x 10 x 15 8 x 15 x x 10 x x 15 x x 20 x x 20 x x 20 x 15 Capacity L (2695 USG) 2040 L (540 USG) 2550 L (675 USG) 3825 L (1010 USG) 3190 L (845 USG) 4780 L (1265 USG) 6375 L (1685 USG) 9565 L (2530 USG) L (3370 USG) sales@redl.com 16

Delivering powerful solutions.

Eaton Industrial Hose Master Catalog North America Delivering powerful solutions. Eaton Industrial Hose Products Table of Contents Section Pages Introduction A-2 A-12 Air and Multipurpose High B-5 B-8