RS46 SERIES TECHNICAL GUIDE

Transcription

1 RS SERIES TECHNICAL GUIDE

2 DIMENSIONS 4-1 (h 4) (h 3) 4-2 (h 1) 4-7 (h 6) 4-15 (h 13) 1-5 (Q) -41 CH 4-8 (h 7) 1-6 (c) 1-8 () 4- (m 1) 4-32 (m 2) 1-9 (y) 4-19 (l 1) 4-20 (l 2) MAXIMUM CAPACITY CONTAINER PICKING END TO END 20'-0 END ON LIFTING CAPACITIES MODEL lb kg lb kg RS-29 70,500 32,000,0 14,000 RS-33 77,200 35,000 35,0 16,000 RS- 92,0,000,100 20,000 RS-41S,000,0 58,000 26,0 RS-41L,000,0 58, ,0 4.0 (100) RS-41LS,000,0 67,000 (3,048),0 RS-41XLS,000,0 67,000,0 20'-0 END ON LIFTING CAPACITIES 40'-0 END ON LIFTING CAPACITIES (3,048) 4.0 (100) 240 (6,096) 4.0 (100) 2

3 DIMENSIONS 1/2 a r (Ast) V r (W a ) 1/2 a r 1 r 2 = radius of swing of container rear corner = radius of swing of container front corner W a = outside turning radius of the truck a V = total operating clearance: = 200 mm (100 mm each side acc. VDI) see VDI line and 4-3 = (theoretical) ~ stacking aisle width, no intrusive stacking: V = r 2 + the larger of r 1 or W a Ast = (practical) ~ stacking aisle width, no intrusive stacking and with clearance: Ast = V + a Y V /4 (b 1) (b 2) 3-7 (b 11) 3-6 (b10) Z 4-35 (Wa) 4- (b 13) 3

4 RATED CAPACITIES AND STACKING HEIGHTS (shown in 1,000 lbs.) MECHANICAL PILE SLOPE POWERED PILE SLOPE RS -29 CH CONTAINER SPREADER RS -33 CH CONTAINER SPREADER RS - CH CONTAINER SPREADER RS -41S CH CONTAINER SPREADER Stabilizer Applied (truck static) mm mm 2 65mm 86 Stabilizer Applied (truck static) Stabilizer NOT Applied Stabilizer NOT Applied Note: All load centers,, are taken from the front face of the (front) tires, deduct 3.9 for load centers taken from the front face of the stabilizer.

5 RATED CAPACITIES AND STACKING HEIGHTS (shown in 1,000 lbs.) MECHANICAL PILE SLOPE POWERED PILE SLOPE RS -41L CH CONTAINER SPREADER 77 RS -41LS CH CONTAINER SPREADER Stabilizer Applied (truck static) Stabilizer NOT Applied Stabilizer Applied (truck static) Stabilizer NOT Applied RS -41XLS CH CONTAINER SPREADER Stabilizer Applied (truck static) Stabilizer NOT Applied Stabilizer NOT Applied r mm mm 53 r HANDLING IN SECOND RAIL RS -41XLS CH CONTAINER SPREADER (WTP WITH POWERED PILE SLOPE) 77 Stabilizer Applied (truck static) Stabilizer NOT Applied 77 Stabilizer Applied (truck static) 94 r2 r1 2 65mm Note: All load centers,, are taken from the front face of the (front) tires, deduct 3.9 for load centers taken from the front face of the stabilizer. r mm r mm 5

6 RS-29 / RS-33 / RS- SPECIFICATIONS GENERAL WT. WHEELS DIMENSIONS PERFORMANCE 1-1 Manufacturer HYSTER HYSTER HYSTER 1-2 Model designation RS-29 CH RS-33 CH RS- CH 1-3 Powertrain / drivetrain Diesel Diesel Diesel 1-4 Operator type Seated Seated Seated Load capacity at load center distance c 1 without/with stabilizer (1) Q 1 lbs kg,413,000 n/a n/a,413,000 n/a n/a,413,000 n/a n/a Load capacity at load center distance c 2 without/with stabilizer (1) Q 2 lbs kg 63,4 29,000 n/a n/a,753 33,000 n/a n/a,6,000 n/a n/a Load capacity at load center distance c 3 without/with stabilizer (1) Q 3 lbs kg,865 14,000 n/a n/a,4 17,000 n/a n/a 41,8 19,000 n/a n/a Load center distance c 1 (2) c 1 in mm 73 1, , , Load center distance c 2 (2) c 2 in mm 150 3, , , Load center distance c 3 (2) c 3 in mm 2 6,5 2 6,5 2 6,5 1-8 Load distance, ctr of drive ale to face of front tires/front of stabilizer in mm n/a n/a n/a n/a 0 n/a n/a 1-9 Wheelbase y in mm 2 6, , , Stacking height at first row (number container height) # # 5 9' 6" 5 9' 6" 5 9' 6" 2-1 Service weight lbs kg 1,017 68, ,174, ,827, Ale loading with load, front / rear at c 1 lbs kg 223,439,350 28,1 13, ,7,100,6 17, ,7 103,200 48,2 22, Ale loading without load, front / rear at c 1 lbs kg 77,823 35,0 73,1 33,200 77,1 35,000 82,012,200 80,9,500 94,358, Tire type Pneumatic Pneumatic Pneumatic 3-2 Tire size, front PR PR PR 3-3 Tire size, rear PR PR PR Wheels, number front / rear (X = driven wheels) 4 / 2 4 / 2 4 / Tread, front b 10 in mm 1 3, , , Tread, rear b 11 in mm 120 3, , ,0 4-1 Boom angle minimum / maimum deg deg 0 / 59 0 / 59 0 / Height of boom lowered h 1 in mm 185 4, , ,5-1 Lift height at load center c 1 (3) h 3.1 in mm 1 15,2 1 15,2 5 15,355-2 Lift height at load center c 2 (3) h 3.2 in mm , , ,945 Height, boom etended h 4 in mm , , , Height of overhead guard (cabin) h 6 in mm 1 3,0 1 3, , Seat height to SIP (4) h 7 in mm 2,555 2, , Height under Twistlock - lowered (3) h 13 in mm 53 1, , , Overall length l 1 in mm 329 8, , , Overall length including boom retracted l 2 in mm 7 11, , , Overall width across all of truck b 2 in mm 165 4, , , Overall width across spreader 20' b 1.20 in mm 240 6, , , Overall width across spreader 40' b 1.40 in mm , , , Ground clearance, lowest point m 1 in mm Ground clearance, center or wheelbase m 2 in mm Aisle width: 20' container (5) Ast 20 in mm , , , Aisle width: 40' container (5) Ast 40 in mm 5 13,9 5 13, , Outside turning radius W a in mm 3 8,0 3 8,0 3 9, Internal turning radius b 13 in mm 59 1, ,500 2,000 PERFORMANCE CUMMINS QSL9 TIER 4F ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (6) % % PERFORMANCE CUMMINS QSM11 335HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (6) % % PERFORMANCE QSM11 0HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (6) % % (1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for using powered pile slope spreader is appro. 2,000 lbs. (0 kg) (2) From face of front tires. (3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function: deduct 12.2 in (0 mm). (4) Full suspension seat in depressed position. (5) Spreader at 5 in (8.0 m) high, central above front ale; container 0 in/mm in front of tires; includes 2 4 in (100 mm) clearance. (6) Gradeability figures provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. 6

7 RS-41S / RS-41L SPECIFICATIONS GENERAL WT. WHEELS DIMENSIONS PERFORMANCE 1-1 Manufacturer HYSTER HYSTER 1-2 Model designation RS-41S CH RS-41L CH 1-3 Powertrain / drivetrain Diesel Diesel 1-4 Operator type Seated Seated Load capacity at load center distance c 1 without/with stabilizer (1) Q 1 lbs kg,413,000,413,000,413,000 n/a n/a Load capacity at load center distance c 2 without/with stabilizer (1) Q 2 lbs kg 83,776 38,000,3 41,000,3 41,000 n/a n/a Load capacity at load center distance c 3 without/with stabilizer (1) Q 3 lbs kg,297 21,000 61,9 28,000 50,706 23,000 n/a n/a Load center distance c 1 (2) c 1 in mm 73 1, , Load center distance c 2 (2) c 2 in mm 150 3, , Load center distance c 3 (2) c 3 in mm 2 6,5 2 6,5 1-8 Load distance, ctr of drive ale to face of front tires / front of stabilizer in mm ,0 0 n/a n/a 1-9 Wheelbase y in mm 2 6, , Stacking height at first row (number container height) # # 5 9' 6" 5 9' 6" 2-1 Service weight lbs kg 1,6 83,0 182,102 82, Ale loading with load, front / rear at c 1 lbs kg 232,7 105,400 53,352 24, ,8 103,400 55,556 25, Ale loading without load, front / rear at c 1 lbs kg 85,9 38,700 98,9,0,217 38,200 97,5, Tire type Pneumatic Pneumatic 3-2 Tire size, front PR PR 3-3 Tire size, rear PR PR Wheels, number front / rear (X = driven wheels) 4 / 2 4 / Tread, front b 10 in mm 1 3, , Tread, rear b 11 in mm 120 3, ,0 4-1 Boom angle minimum / maimum deg deg 0 / 59 0 / Height of boom lowered h 1 in mm 189 4, ,5-1 Lift height at load center c 1 (3) h 3.1 in mm 5 15, ,355-2 Lift height at load center c 2 (3) h 3.2 in mm 5 13, ,945 Height, boom etended h 4 in mm , , Height of overhead guard (cabin) h 6 in mm 150 3, , Seat height to SIP (4) h 7 in mm 104 2, , Height under Twistlock - lowered (3) h 13 in mm 57 1,0 57 1, Overall length l 1 in mm 341 8, , Overall length including boom retracted l 2 in mm , , Overall width across all of truck b 2 in mm 165 4, , Overall width across spreader 20' b 1.20 in mm 240 6, , Overall width across spreader 40' b 1.40 in mm , , Ground clearance, lowest point m 1 in mm Ground clearance, center or wheelbase m 2 in mm Aisle width: 20' container (5) Ast 20 in mm , , Aisle width: 40' container (5) Ast 40 in mm , , Outside turning radius W a in mm 3 9, ,0 4- Internal turning radius b 13 in mm 2, ,400 PERFORMANCE CUMMINS QSL9 TIER 4F ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (6) % % PERFORMANCE CUMMINS QSM11 335HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (6) % % PERFORMANCE QSM11 0HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h 5-2 Lifting speed with / without load ft/min m/s 5-3 Lowering speed with / without load ft/min m/s 5-7 Gradeability - 1 mph 1.6 km/h with / without load (6) % % (1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for using powered pile slope spreader is appro. 2,000 lbs. (0 kg) (2) From face of front tires. (3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function: deduct 12.2 in (0 mm). (4) Full suspension seat in depressed position. (5) Spreader at 5 in (8.0 m) high, central above front ale; container 0 in/mm in front of tires; includes 2 4 in (100 mm) clearance. (6) Gradeability figures provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. 7

8 RS-41LS / RS-41XLS SPECIFICATIONS GENERAL WT. WHEELS DIMENSIONS PERFORMANCE 1-1 Manufacturer HYSTER HYSTER 1-2 Model designation RS-41LS CH RS-41XLS CH 1-3 Powertrain / drivetrain Diesel Diesel 1-4 Operator type Seated Seated Load capacity at load center distance c 1 without/with stabilizer Q 1 lbs kg,413,000,413,000,413,000,413, Load capacity at load center distance c 2 without/with stabilizer Q 2 lbs kg 83,776 38,000,3 41,000,3 41,000,3 41, Load capacity at load center distance c 3 without/with stabilizer Q 3 lbs kg,297 21,000 66,139,000 55,777 25,0 71,871 32, Load center distance c 1 (2) c 1 in mm 73 1, , Load center distance c 2 (2) c 2 in mm 150 3, , Load center distance c 3 (2) c 3 in mm 2 6,5 2 6,5 1-8 Load distance, ctr of drive ale to face of front tires / front of stabilizer in mm , ,0 1-9 Wheelbase y in mm 2 6, , Stacking height at first row (number container height) # # 5 9' 6" 5 9' 6" 2-1 Service weight lbs kg 186,1,0 186,1, Ale loading with load, front / rear at c 1 lbs kg 232, ,0 55,116 25,000 2, ,400 57,871 26, Ale loading without load, front / rear at c 1 lbs kg 89,067 40,400 97,4,200 91,0 41,0,570 43, Tire type Pneumatic Pneumatic 3-2 Tire size, front PR PR 3-3 Tire size, rear PR PR Wheels, number front / rear (X = driven wheels) 4 / 2 4 / Tread, front b 10 in mm 1 3, , Tread, rear b 11 in mm 120 3, ,0 4-1 Boom angle minimum / maimum deg deg 0 / 59 3 / Height of boom lowered h 1 in mm 189 4, ,265-1 Lift height at load center c 1 (2) h 3.1 in mm 5 15, ,225-2 Lift height at load center c 2 (2) h 3.2 in mm 5 13, ,158 Height, boom etended h 4 in mm , ,0 4-7 Height of overhead guard (cabin) h 6 in mm 150 3, , Seat height to SIP (3) h 7 in mm 104 2, , Height under Twistlock - lowered (2) h 13 in mm 57 1,0 1, Overall length l 1 in mm 341 8, , Overall length including boom retracted l 2 in mm , , Overall width across all of truck b 2 in mm 165 4, , Overall width across spreader 20' b 1.20 in mm 240 6, , Overall width across spreader 40' b 1.40 in mm , , Ground clearance, lowest point m 1 in mm Ground clearance, center or wheelbase m 2 in mm Aisle width: 20' container (4) Ast 20 in mm 9 13, , Aisle width: 40' container (4) Ast 40 in mm ,0 5 14, Outside turning radius W a in mm 6 9, , Internal turning radius b 13 in mm 94 2, ,400 PERFORMANCE CUMMINS QSL9 TIER 4F ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (5) % % PERFORMANCE CUMMINS QSM11 335HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h Lifting speed with / without load ft/min m/s Lowering speed with / without load ft/min m/s Gradeability - 1 mph 1.6 km/h with / without load (5) % % PERFORMANCE QSM11 0HP TIER 3 ENGINE - TE Travel speed with / without load mph km/h 5-2 Lifting speed with / without load ft/min m/s 5-3 Lowering speed with / without load ft/min m/s 5-7 Gradeability - 1 mph 1.6 km/h with / without load (5) % % (1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for using powered pile slope spreader is appro. 2,000 lbs. (0 kg) (2) From face of front tires. (3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function: deduct 12.2 in (0 mm). (4) Full suspension seat in depressed position. (5) Spreader at 5 in (8.0 m) high, central above front ale; container 0 in/mm in front of tires; includes 2 4 in (100 mm) clearance. (6) Gradeability figures provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. 8

9 POWERTRAINS GENERAL 1-1 Manufacturer HYSTER 1-2 Model designation RS -29/33//41 CH 1-3 Powertrain / drivetrain Diesel ENGINE 7-1 Engine manufacturer / model CUMMINS / QSM 11 Cummins / QSM 11 Cummins / QSL9 7-1a EPA / CE compliance Tier 3 / Stage IIIA Tier 3 / Stage IIIA Tier 4 / Stage IV 7-2 Engine power output according to ISO 1585 hp kw Engine power output - Peak hp kw Rated speed rpm 1/min 2,100 2,100 2, Engine (1/min) lb-ft N-m ,4@ Number of cylinders / displacement # / cm3 6 / 10,800 6 / 10,800 6 / 8,0 Turbocharger Type Wastegate, water cooled Wastegate, water cooled Variable geometry, water cooled 7-8 Alternator output Amps DRIVE 8-1 Drive control / Transmission Type / # Hydrodynamic Transmission Hydrodynamic Transmission Hydrodynamic Transmission 8-2 Transmission manufacturer / type Type / # Spicer Off-Highway TE-27 Spicer Off-Highway TE-32 Spicer Off-Highway TE Transmission speeds forward / backward # 4 / 4 4 / 4 4 / Coupling Type Torque Converter Torque Converter Torque Converter 8-6 Wheel drive / drive ale manufacturer / type Type / # Kessler D102 Kessler D102 Kessler D Service brake Type Oil immersed (wet) disc Oil immersed (wet) disc Oil immersed (wet) disc 8-12 Parking brake Type Spring applied, dry disc on drive ale Spring applied, dry disc on drive ale Spring applied, dry disc on drive ale SPREADER 9-1 Spreader manufacturer / type Type / # Elme / 817 Elme / 817 Elme / Pile slope, mechanical without PPS degrees Pile slope, total with PPS degrees Size of containers ft ISO 20' - 40' ISO 20' - 40' ISO 20' - 40' 9-4 Side shift b 8 in mm +.5 / / / / / / Rotation angle, without override degrees +12 / / / Rotation angle, with override degrees +185 / / / - MISC 10-1 Operating pressure for attachments psi bar 2, , , Oil volume for attachments gpm l/m Hydraulic tank capacity gal l Fuel tank capacity gal l DEF/AdBlue Tank capacity gal l N/A N/A Steering design Hydrostatic Hydrostatic Hydrostatic 10-7 Sound pressure level at driver's seat (7) Lpaz db(a) NOTES: Specifications are affected by the condition of the vehicle and how it is equipped, as well as the nature and condition of the operating area. Inform your dealer of the nature and condition of the intended operating area when purchasing your Hyster truck. (1) Load capacities shown with mechanical pile slope (MPS) spreader. Deduction for using powered pile slope spreader is appro. 2,000 lbs. (0 kg) (2) From face of front tires. (3) With Mechanical Pile Slope (MPS). For optional Powered Pile Slope (PPS) function: deduct 12.2 in (0 mm). (4) Full suspension seat in depressed position. (5) Spreader at 5 in (8.0 m) high, central above front ale; container 0 in/mm in front of tires; includes 2 4 in (100 mm) clearance. (6) Gradeability figures provided for comparison of tractive performance, but are not intended to endorse the operation of vehicle on the stated inclines. (7) Add 2 db(a) for option with additional cab fan. All capacities are according to EN1459. All specifications and capacities are valid for trucks equipped with a Hyster container handling spreader for handling ISO containers. Safety: This truck conforms to the current EU requirements. NOTICE: Care must be eercised when handling elevated loads. Operators must be trained and must read, understand and follow the instructions contained in the Operating Manual. All values are nominal values and they are subject to tolerances. For further information, please contact the manufacturer. Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment. Values may vary with alternative configurations. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B , per OSHA Section (a)(2), and also comply with the B56.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer. NOTE: Specifications, unless otherwise listed, are for a standard truck without optional equipment. Specification data is based on VDI

10 FEATURES AND OPTIONS PERFORMANCE Cummins QSL 9 diesel engine rated 350 hp (271 kw) Tier 4* variable geometry turbocharger, water cooled Cummins QSM11 diesel engine rated 0 hp (224 kw) Tier 3* wastegate turbocharger, water cooled Cummins QSM11 diesel engine rated 335 hp (250 kw) Tier 3* wastegate turbocharger, water cooled Hibernate idle Hydraulically driven on-demand cooling fan 120 amp alternator Powertrain protection system Spicer Off-Highway TE-32 4-speed auto-shifting transmission* Spicer Off-Highway TE-27 4-speed auto-shifting transmission* Kessler D102 drive ale with wet disc brakes DRIVE Traction speed limiter when carrying container (adjustable) Traction speed limiter - unconditional (adjustable) Steer ale with full stroke steer cylinder for tight turning radius Steer ale with reduced stroke steer cylinder for longer tire life Premium E4 Pneumatic bias ply tires Pemium Slick bias ply tires Premium Slick radial tires drive and steer tires* drive and steer tires* VISIBILITY Eternal wide angle mirrors mounted on rear of front fenders Eternal wide angle mirrors mounted on top of front fenders Rear view camera system Halogen work lights High performance LED work lights LED twistlock indicator lights LED stop/tail/brake lights Turn signals, hazard & marker lights (LED)* OPERATION Electric air horn 112 db Visible alarm amber strobe light Audible alarm reverse direction activated db(a), self-adjusting Forward motion alarm Seatbelt interlock for engine start Seatbelt indicator light on top of cab Tire pressure monitoring system Lockable battery disconnect switch Battery jump start connector (NATO plug) Adjustable automatic empty seat engine shutdown Trainer seat Non-locking fuel cap Lockable fuel cap Hyster Tracker wireless asset management - monitoring* Hyster Tracker wireless asset management - access / verification Auto greasing system for basic truck & outer boom Auto greasing system for inner boom and spreader 24 volt electrical system Engine block heater 110 & 220 volt Steer wheel lug nut protection Engine compartment light LIFT On-demand load sensing hydraulic system Automatic throttle-up when lifting (in neutral or inching) 2-stage boom for 5-high 1st row stacking 6-high 1st row stacking 3B6 load moment indicator with monochrome display 3B6 load moment indicator with color display High speed hoist system - below 10 tons Hydraulic system temperature protection Container weighing system SOLAS compliant 10

11 FEATURES AND OPTIONS HANDLING Hyster model 817 spreader, with rotation Mechanical Pile Slope Powered Pile Slope Powered dampening Wide Twistlock Position (WTP) container handling Intermodal handling - top / bottom pick* Barge container handling 4 lifting eyes located on end beam corners 4 lifting eyes located under center beam of spreader Container guides - located outside near twistlocks Container guides - 500mm inset, heavy duty Rotation stops with override Automatic etend/retract Stops for ' containers Vertical lift Tool changer Attachments for steel load handling Attachments for wind industry load handling APPEARANCE Hyster yellow paint base truck Special paint base truck ERGONOMICS Manual sliding cabin for service access Powered partial-sliding cabin, incl. additional mirrors on top of fenders Powered full-sliding cabin, including additional steps and handrails Isolated mounting for low noise and vibration Coat hook Front, top and rear wipers Front and rear window defrosters Left side handrails, stairway and cabin door RH side door Right side handrails and stairway Stair lights Multifunction display panel Seat-side joystick hydraulic control Steering wheel spinner knob Directional control lever Interior wide angle mirrors Heater with 3-speed fan Telescoping & tilting steering column Recirculation fan* DC/DC converter 24 volt/12 volt with socket* 2nd 12 volt socket Accessory mounting post Rear locking console in cab Heated top window "H"-pattern front wiper Air conditioning Sun shades on top and rear Radio preparation set-up (wiring, two speakers and antenna) Reading light Operator presence system Mechanical suspension seat Delue air suspension seat Low backrest on seat* High backrest on seat* Cloth seat cover Vinyl seat cover Seat heating 2-point high visibility seatbelt 3-point high visibility seatbelt SUPPLEMENTAL Literature package Operator s manual CE certification* * Standard or optional in selected markets. Other options available through Special Products Engineering Department (SPED). Contact Hyster for details. 11

12 Hyster Company P.O. Bo 7006 Visit us online at or call us at HYSTER-1. Greenville, North Carolina Hyster,, and STRONG PARTNERS. TOUGH TRUCKS. and MONOTROL are registered trademarks in the United States and certain other jurisdictions. Hyster products are subject to change without notice. Part No. RSCH/TG 4/2017 Litho in U.S.A. Trucks may be shown with optional equipment Hyster Company. All rights reserved.