E80-120XN SERIES TECHNICAL GUIDE

Size: px

Start display at page:

Download "E80-120XN SERIES TECHNICAL GUIDE"

Dwain McCoy
6 years ago
Views:

1 E-10XN SERIES TECHNICAL GUIDE

2 E-10XN DIMENSIONS b C SIP 1 º 0 * ** (length) * EXN = EXNS = 0 EXN = 0 E10XN = 0 ** EXN = 0 EXNS = 0 EXN =. E10XN =. Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).

3 OTHER ELECTRIC PERFORMANCE WEIGHT DIMENSIONS TIRES/ WHEELS GENERAL EXN SPECIFICATIONS Manufacturer Model Designation Power Operation Rated Capacity Load Center Tire Type - Cushion, Solid, Pneumatic, etc. Tire Size Wheels - Number X=Driven Tread Center of Tires Narr Dr/Wide Dr/Steer Mast Tilt Std Opt Mast - Lowered Std Mast Free Lift - Top of Fork Std Stg Limited Free Lift Mast Opt Stg Full Free Lift Mast with/without LBR Lift - Top of Fork Std Stg Limited Free Lift Mast Mast - Extended Std Mast with/without LBR Overhead Guard Std/Opt/Opt Flat Plate SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel Tow Pin Vertical Center of Pin Overall Standard Tread/Wide Tread Forks Thickness x x Standard Carriage Class III Floor to Top of Battery Rollers Center of Truck Load Distance Center of Wheel to Face of Forks Battery Compartment Without/With Battery Rollers Nominal Actual to Face of Forks Chassis Wheelbase Right Angle Stack Equal Aisle 90 Intersecting Aisle Outside Turning Radius Truck Weight Without Battery NL Axle Loading - Drive Static with Max. Wt. Battery Axle Loading - Steer Static with Max. Wt. Battery Travel Speed Lift Speed 8 Lower Speed Gradeability Drawbar Pull 1 Brake Battery 0 1 Number of Speeds Step Floor Attachment Relief Pressure Auxiliary Oil Flow rd and th Function Sound Level Measured per ANSI B Extended Shift OFF Extended Shift ON Method of Control Method of Operation Type 1 Rating Traction/Pump in degrees SIZE psi (bar) gal/min (l/min) db (A) Hyster EXN Electric Sit 00 () () Cushion/Cushion x 9 x 1/ x x 1.1 X/ /1/. (91/1/0) F/B 8F/B 8.1 (1) / (900/1) 10 (0) /1 (/8) 9/91/8.1 (88//1)././. (9/9/9) 1. ()./0 (100/10) x.9 x (0 x 1 x ) () 0 (09).8/. (9/90)./.1 (1/1). ()./ (/09). (99) 9. (1) (1) 10.8 (81) 9. (0) 8. (1) 00 (01) /0098 (/9) 911/1 (1/)./9.9 (/1.9)./. (.8/.) 9/8.1 (1./1).9/. (./1.) 9/8 (0./0.) 8/ (0./0.) 8/ (0./0.) / (0./0.) 88/ (0./0.) 0/8 (0./0.) 9/ (0./0.) /91 (0.8/0.) /98 (0./0.) /1.1./.8 8./../.8 / /8 1/1 1/1 Hydraulic/Spring Applied Foot/Automatic Lead Acid. (.). () Infinitely Variable/Infinitely Variable 1.1 (). (8) 0 (1) 1 (0) 9/./. (.8/).9/.8 (./.) 8/ (0./0.) / (0./0.) 0/8 (0./0.).1/..9/ /1 11/1. (1). () Above specifications, unless otherwise listed, are for a standard truck without optional equipment. Right Angle Stack and Equal Intersecting Aisle dimensions provided with a long and wide pallet load, allowing zero clearance. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B.1-9, per OSHA Section.8(a)(), and also comply with the B.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.

4 OTHER ELECTRIC PERFORMANCE WEIGHT DIMENSIONS TIRES/ WHEELS GENERAL E0XNS DIMENSIONS Manufacturer Model Designation Power Operation Rated Capacity Load Center Tire Type - Cushion, Solid, Pneumatic, etc. Tire Size Wheels - Number X=Driven Tread Center of Tires Narr Dr/Wide Dr/Steer Mast Tilt Std Opt Mast - Lowered Std Mast Free Lift - Top of Fork Std Stg Limited Free Lift Mast Opt Stg Full Free Lift Mast with/without LBR Lift - Top of Fork Std Stg Limited Free Lift Mast Mast - Extended Std Mast with/without LBR Overhead Guard Std/Opt/Opt Flat Plate SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel Tow Pin Vertical Center of Pin Overall Standard Tread/Wide Tread Forks Thickness x x Standard Carriage Class III Floor to Top of Battery Rollers Center of Truck Load Distance Center of Wheel to Face of Forks Battery Compartment Without/With Battery Rollers Nominal Actual to Face of Forks Chassis Wheelbase Right Angle Stack Equal Aisle 90 Intersecting Aisle Outside Turning Radius Truck Weight Without Battery NL Axle Loading - Drive Static with Max. Wt. Battery Axle Loading - Steer Static with Max. Wt. Battery Travel Speed Lift Speed 8 Lower Speed Gradeability Drawbar Pull 1 Brake Battery 0 1 Number of Speeds Step Floor Attachment Relief Pressure Auxiliary Oil Flow rd and th Function Sound Level Measured per ANSI B Extended Shift OFF Extended Shift ON Method of Control Method of Operation Type 1 Rating Traction/Pump in degrees SIZE psi (bar) gal/min (l/min) db (A) Hyster E0XNS Electric Sit 000 () () Cushion/Cushion x 1 x 1/ x x 1.1 X/ /.9/8. (1/1/9) F/B 8F/B / (89/1) 9 (90) 19/1 (1/) 9/91/8.1 (88//1)././. (9/9/9) 1. () /.9 (10/10) x.9 x (0 x 10 x ) () 0 (09)./. (9/8)./.1 (1/1).8 ()./ (/09) ". (99) 0. () (1) 1 () 8 () 88. (0) 10 (9) 98/ (8/8) 09/ (01/)./8.8 (1./1.)./ (./.) 8.8/. (1./1.).9/9.9 (./1.9) 1/ (0./0.) 89/ (0./0.) / (0./0.) 8/ (0./0.) 8/ (0./0.) 8/ (0./0.9) /89 (0./0.) /81 (0./0.1) /8 (0./0.)./.8./1..1/. 9.1/. / 9/8 1/1 1/19 Hydraulic/Spring Applied Foot/Automatic Lead Acid. (.). () Infinitely Variable/Infinitely Variable 1.1 (). (8) 0 (1) 1 (0) 9/./ (./.).9/9.9 (./1.9) 89/ (0./0.) 8/ (0./0.) 8/ (0./0.9)./1.1 9./.8 /09 1/109. (1). () Above specifications, unless otherwise listed, are for a standard truck without optional equipment. Right Angle Stack and Equal Intersecting Aisle dimensions provided with a long and wide pallet load, allowing zero clearance. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B.1-9, per OSHA Section.8(a)(), and also comply with the B.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.

5 OTHER ELECTRIC PERFORMANCE WEIGHT DIMENSIONS TIRES/ WHEELS GENERAL E0XN SPECIFICATIONS Manufacturer Model Designation Power Operation Rated Capacity Load Center Tire Type - Cushion, Solid, Pneumatic, etc. Tire Size Wheels - Number X=Driven Tread Center of Tires Narr Dr/Wide Dr/Steer Mast Tilt Std Opt Mast - Lowered Std Mast Free Lift - Top of Fork Std Stg Limited Free Lift Mast Opt Stg Full Free Lift Mast with/without LBR Lift - Top of Fork Std Stg Limited Free Lift Mast Mast - Extended Std Mast with/without LBR Overhead Guard Std/Opt/Opt Flat Plate SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel Tow Pin Vertical Center of Pin Overall Standard Tread/Wide Tread Forks Thickness x x Standard Carriage Class III Floor to Top of Battery Rollers Center of Truck Load Distance Center of Wheel to Face of Forks Battery Compartment Without/With Battery Rollers Nominal Actual to Face of Forks Chassis Wheelbase Right Angle Stack Equal Aisle 90 Intersecting Aisle Outside Turning Radius Truck Weight Without Battery NL Axle Loading - Drive Static with Max. Wt. Battery Axle Loading - Steer Static with Max. Wt. Battery Travel Speed Lift Speed 8 Lower Speed Gradeability Drawbar Pull 1 Brake Battery 0 1 Number of Speeds Step Floor Attachment Relief Pressure Auxiliary Oil Flow rd and th Function Sound Level Measured per ANSI B Extended Shift OFF Extended Shift ON Method of Control Method of Operation Type 1 Rating Traction/Pump in degrees SIZE psi (bar) gal/min (l/min) db (A) Hyster E0XN Electric Sit 000 () () Cushion/Cushion x 1 x 1/ x x 1.1 X/ /.9/8. (1/1/9) F/B 8F/B / (89/1) 9 (90) 19/1 (1/) 9/91/8.1 (88//1)././. (9/9/9) 1. () /.9 (10/10) x.9 x (0 x 10 x ) () 0 (09)./. (9/8)./.1 (1/1).8 ()./ (/09) ". (1).1 (1) 8. () 18 (1) 8. (11) 9. (1) 10 (9) 08/81 (/1) 1/ (99/)./8.8 (1./1.)./ (./.) 8.8/. (1./1.).9/9.9 (./1.9) 1/ (0./0.) 89/ (0./0.) / (0./0.) 8/ (0./0.) 8/ (0./0.) 8/ (0./0.9) /89 (0./0.) /81 (0./0.1) /8 (0./0.).9/.9./1./. 9./. / 0/ /1 /10 Hydraulic/Spring Applied Foot/Automatic Lead Acid. (.). () Infinitely Variable/Infinitely Variable 1.1 (). (8) 0 (1) 1 (0) 9/./ (./.).9/9.9 (./1.9) 89/ (0./0.) 8/ (0./0.) 8/ (0./0.9).8/1. 9./.9 /88 1/100. (1). () Above specifications, unless otherwise listed, are for a standard truck without optional equipment. Right Angle Stack and Equal Intersecting Aisle dimensions provided with a long and wide pallet load, allowing zero clearance. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B.1-9, per OSHA Section.8(a)(), and also comply with the B.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.

6 OTHER ELECTRIC PERFORMANCE WEIGHT DIMENSIONS TIRES/ WHEELS GENERAL E10XN DIMENSIONS Manufacturer Model Designation Power Operation Rated Capacity Load Center Tire Type - Cushion, Solid, Pneumatic, etc. Tire Size Wheels - Number X=Driven Tread Center of Tires Narr Dr/Wide Dr/Steer Mast Tilt Std Opt Mast - Lowered Std Mast Free Lift - Top of Fork Std Stg Limited Free Lift Mast Opt Stg Full Free Lift Mast with/without LBR Lift - Top of Fork Std Stg Limited Free Lift Mast Mast - Extended Std Mast with/without LBR Overhead Guard Std/Opt/Opt Flat Plate SIP to Bottom Std OHG Susp at mid-point Std/Susp/Swivel Tow Pin Vertical Center of Pin Overall Standard Tread/Wide Tread Forks Thickness x x Standard Carriage Class III Floor to Top of Battery Rollers Center of Truck Load Distance Center of Wheel to Face of Forks Battery Compartment Without/With Battery Rollers Nominal Actual to Face of Forks Chassis Wheelbase Right Angle Stack Equal Aisle 90 Intersecting Aisle Outside Turning Radius Truck Weight Without Battery NL Axle Loading - Drive Static with Max. Wt. Battery Axle Loading - Steer Static with Max. Wt. Battery Travel Speed Lift Speed 8 Lower Speed Gradeability Drawbar Pull 1 Brake Battery 0 1 Number of Speeds Step Floor Attachment Relief Pressure Auxiliary Oil Flow rd and th Function Sound Level Measured per ANSI B Extended Shift OFF Extended Shift ON Method of Control Method of Operation Type 1 Rating Traction/Pump in degrees SIZE psi (bar) gal/min (l/min) db (A) Hyster E10XN Electric Sit 1000 () () Cushion/Cushion x 1 x 1/ x x 1.1 X/ /.9/8. (1/1/9) F/B 8F/B / (89/1) 9 (90) 19/1 (1/) 9/91/8.1 (88//1)././. (9/9/9) 1. () /.9 (10/10). x.9 x (0 x 10 x ) () 0 (09)./. (9/8)./.1 (1/1). ()./ (/09) ". (1). () 8. (). (1) 8. () 9. (0) 18 () /0 (8/1) 88/1 (1/0) 9./8 (1.1/1.9)./. (1./1.) 8./ (1./.)./9 (1./1.) 1/ (0./0.1) 89/ (0./0.) / (0./0.0) 8/0 (0./0.) 8/1 (0./0.08) 8/1 (0./0.) /89 (0./0.) /81 (0./0.1) /8 (0./0.)./..8/1.1./ 8./.1 0/ / 19/1 1/1 Hydraulic/Spring Applied Foot/Automatic Lead Acid. (.). () Infinitely Variable/Infinitely Variable 1.1 (). (8) 0 (1) 1 (0) 9/./. (1./1.)./9 (1./1.) 89/ (0./0.) 8/0 (0./0.) 8/1 (0./0.)./1. 8./.1 9/8 1/1. (1). () Above specifications, unless otherwise listed, are for a standard truck without optional equipment. Right Angle Stack and Equal Intersecting Aisle dimensions provided with a long and wide pallet load, allowing zero clearance. CERTIFICATION: Hyster lift trucks meet the design and construction requirements of B.1-9, per OSHA Section.8(a)(), and also comply with the B.1 revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck. Performance specifications are for a truck equipped as described under Standard Equipment on this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature, condition of the operating area, proper service and maintenance of the vehicle. If these specifications are critical, the proposed application should be discussed with your dealer.

7 MAST DIMENSIONS AND BATTERY SPECIFICATIONS EXN MAST DIMENSIONS Maximum Fork (TOF) + Overall Lowered Ht. Overall Extended w/load Backrest Overall Extended w/o Load Backrest Free-Lift (TOF) w/ Load Backrest Free-Lift (TOF) w/o Load Backrest -STAGE LIMITED FREE-LIFT (LFL) MAST 10 (0) 8 (1) () 1 (8) 1 (0) 9 () (8) (8) 11 () 8 (1) 0 () 1 (8) (900) (1) 1 () 9 () (09) () (100) (1) -STAGE FULL FREE-LIFT (FFL) MAST -STAGE FULL FREE-LIFT (FFL) MAST (1) 8 (1) () 0 () (900) (1) (1) 88 () (9) () (00) (1) (0) 9 () () () (00) 1 (1) (0) 0 () (8) 0 () 1 () 9 () E0XNS, E0XN, E10XN MAST DIMENSIONS Maximum Fork (TOF) + Overall Lowered Ht. Overall Extended w/load Backrest Overall Extended w/o Load Backrest Free-Lift (TOF) w/ Load Backrest Free-Lift (TOF) w/o Load Backrest -STAGE LIMITED FREE-LIFT (LFL) MAST 9 (90) 19 (1) 1 () 1 (90) 9 (8) (1) () 1 (90) 8 (8) 0 (1) () -STAGE FULL FREE-LIFT (FFL) MAST 0 (1) () 1 (1) (89) (1) 1 (1) 9 (8) () 1 (1) (9) 9 (1) 1 (8) 00 (08) (89) (1) -STAGE FULL FREE-LIFT (FFL) MAST 1 (1) (0) 9 () (91) 1 () (9) (1) 08 (0) 0 (8) 8 (1) () 1 (1) (1) BATTERY AND COMPARTMENT SPECIFICATIONS Battery Compartment Dimensions Truck Model Battery Dimensions and Specifications "X" EXN E0XNS Compartment E0XN E10XN Compartment. (99). (1) "Y" "Z" Plates per Cell 0 (.) (8.8) 1 00 (.) 0 (.) (8.8) 00 (.) Volts. (). () Battery Type: EO (Without Cover) Battery amp hr (kwh) capacity is max allowable per UL Commercially available lead acid batteries may not necessarily reach these max limits Battery Roller option reduces battery compartment height to.0 (09mm) & max battery height to. (9mm) Battery Compartment is measured front to rear. Battery Compartment is measured across the truck () () (990). (0).9 (08).9 (08) Max Capacity Hour Rate No. of Cells amp hr (kwh) Weight Min Max 0 (1) 00 () 00 (1) 00 () Battery Notes Conventional Charging (Opt G01) Battery Connector: volt - Grey SB 0 (Anderson Power Products P/N 0G or equivalent) volt - Blue SB 0 (Anderson Power Products P/N 1G or equivalent) volt - Black SBE 0 (Anderson Power Products P/N EG or equivalent) Handle (not required): SB 0 and SBE 0 (Anderson Power Products : A TYPE (Grey) P/N 99G or equivalent) Battery Lead: 0 (08 mm), Position B, /0 AWG Battery Notes Rapid/Fast Charging (Opt G0) Battery Connector: Requires Dual Positive / Negative Cabling terminating in () Female EBC-0 DIN Connectors (Anderson Power Products P/N E0-00X9 or equivalent) Each individual DIN connector to include 1 Red Conductor to (+) and 1 black conductor to (-) Battery Lead: ( mm), Position B, Minimum Cable Size /0 AWG

STANDARD EQUIPMENT OPTIONAL EQUIPMENT: -stage limited free lift (LFL) mast with maximum fork height of 10 (0mm) (EXN) or 9 (90mm) (E0-10XN) forward and back mast tilt (mm) wide Class III (EXN) or

(E0-10XN) Lift out battery extraction volt electrical system Standard construction UL Classification Type E 1 steering wheel with integral spinner knob On-demand hydrostatic power assist steer system

mechanical levers AC traction and pump motors (completely brushless) Transistor drive and pump control Advanced VSM (Vehicle System Manager) Progressive thermal management system Fully integrated

8 STANDARD EQUIPMENT OPTIONAL EQUIPMENT: -stage limited free lift (LFL) mast with maximum fork height of 10 (0mm) (EXN) or 9 (90mm) (E0-10XN) forward and back mast tilt (mm) wide Class III (EXN) or Class IV (E0-10XN) hook-type carriage with (1mm) high load backrest extension (mm) long forks Smooth tread rubber drive tire and steer tire Battery compartment size (length) (EXN-0XNS). (E0-10XN) Lift out battery extraction volt electrical system Standard construction UL Classification Type E 1 steering wheel with integral spinner knob On-demand hydrostatic power assist steer system Non-suspension vinyl seat Black ELR non-cinch seat belt Auto park brake Key switch start 9 grid style overhead guard MONOTROL Foot Direction Control function hydraulic control valve w/seat side mechanical levers AC traction and pump motors (completely brushless) Transistor drive and pump control Advanced VSM (Vehicle System Manager) Progressive thermal management system Fully integrated CANbus communication Hyster Stability System (HSS ) Power assist braking Auto Deceleration System with regenerative braking Multifunction display Battery state of charge indicator with lift interrupt Hour meters traction motor, lift pump motor and truck Performance mode indicator Direction indicator Fault indicator (audible & visible) operator selectable, programmable performance modes Easy ingress/egress w/low step height and contoured handhold Operator convenience station Adjustable tilt steering column Anti-cinch operator restraint system Operator presence system Cushioned floormat Static strap Tow pin Seatside power disconnect button On-board software Program, test & diagnose Password protected Electronic horn with integral relay 1 month /,000 hour full truck warranty month /,000 hour powertrain warranty Operating manual Hyster Company P.O. Box 00 Greenville, North Carolina 8-00 Part No. E-10XN/TG 1/0 Litho in U.S.A. Side extraction battery removal with rollers or volt electrical system Rapid / fast charge Cooler / freezer package UL Classification Type EE Available with -stage limited free lift (LFL) and - or -stage full free lift (FFL) masts Carriage with integral sideshift Attachment carriages (E0XN/XNS) Mast tilt option 8 forward / back Return to set tilt Accumulator TouchPoint hydraulic mini-levers with fully adjustable armrest function hydraulic control valve Non-marking, rubber, or lug tread tires Wide tread tires Non-suspension seat (cloth) Full suspension seat (vinyl or cloth) Swivel seat, full suspension (vinyl or cloth) 91 grid style overhead guard 8 flat plate overhead guard Keyless start (with auxiliary key switch) Seat side directional control Telescopic steering column with tilt memory LED and halogen work light packages LED dome / reading light LED brake / tail / back-up light packages Audible reverse activated alarm Visible amber strobe light - continuous activated, overhead guard mounted Rear drive handle with integrated horn button Mirrors dual rear view or single panoramic Load weight indicator Impact monitor Operator password Operator daily checklist System monitor hydraulic low fluid level indicator and hydraulic filter service indicator Hydraulic attachment extension tubes with and without quick disconnect fittings Maintenance reminder Fire extinguisher. lb. dry chemical Red, high-visibility Emergency Locking Retractor (ELR) non-cinch seat belt with or without start interlock Low mount display Visit us online at or call us at 1-0-HYSTER-1. Hyster,, and STRONG PARTNERS. TOUGH TRUCKS. and MONOTROL are registered trademarks in the United States and certain other jurisdictions. Hyster products are subject to change without notice. Trucks may be shown with optional equipment. 0 Hyster Company. All rights reserved.

STRONG PARTNERS. TOUGH TRUCKS. TM. Technical Guide. Counterbalanced Electric, Cushion Tire

STRONG PARTNERS. TOUGH TRUCKS. TM Technical Guide Counterbalanced Electric, Cushion Tire E80-120XN DIMENSIONS 29 48 30 19 40 10 b11 10 C 30 11 11 17 SIP 16 6º 23 48 6 100 * 18 49 24 25 28 ** 26 27 (length)