PRODUCT RANGE PRESENTATION

Transcription

1 PRODUCT RANGE PRESENTATION Mexico City, January

2 LIQUID RING VACUUM PUMPS TRS (single stage) TRH (two stages) TRV (single stage vari-ported design) TRM (single stage vari-ported design monoblock) TRMX(single stage vari-ported design monoblock new design ) TRVX (single stage vari-ported new design) TRVK-TRSK (single stage king size) 2

3 TRS (single stage) 3

4 TRS (single stage) Vacuum range : up to 24/25.5 Hg(V) 200/150 mbar Suction pressure range : 0-24/25.5 Hg(V) 150/ mbar(a) 50Hz : up to 1800 ACFM or 3100 m3/h 60Hz : up to 2100 ACFM or 3500 m3/h Max compression rate : ~6 times 29.92/25 Hg(A) or 1013/150 mbar(a) Number of sizes available : (TRSC 32; 40; 50 alternative to TRSE 32; 40; 50) C construction : port plates separate from pump casings (other constructions) Construction : all sizes bilateral support Lantern construction : up to 40HP (50Hz); up to 50HP (60Hz) to fit flanged e-motors 4

5 TRH (double stage) 5

6 TRH (double stage) Vacuum range : 23/24 up to Hg(V) max 33 mbar Suction pressure range : mbar(a) 50Hz : up to 1900 ACFM or 3200 m3/h 60Hz : up to 2200 ACFM or 3700 m3/h Max compression rate : ~30 ~ 29.92/1.02 Hg(A) or 1013/33 mbar(a) Number of sizes available : (TRHC 32; 40 alternative to TRHC 32; 40) C construction : port plates separate from pump casings (other constructions) Construction : all sizes bilateral support (but TRHE 32-4) Lantern construction : up to 40HP (50Hz); up to 50HP (60Hz) to fit flanged e-motors 6

7 TRV (single stage vari-ported design) 7

8 TRV (single stage vari-ported design) Vacuum range : up to Hg(V) max 33 mbar Suction pressure range : mbar(a) 50Hz : up to 250 ACFM or 420 m3/h 60Hz : up to 300 ACFM or 500 m3/h Max compression rate : ~33 ~ 29.92/1.02 Hg(A) or 1013/33 mbar(a) Number of sizes available : (TRVB for 50Hz markets) + 2 (TRVB and TRVA for 60Hz markets) Construction : overhung construction (up to size TRVB ) to fit only flanged e-motors; bilateral support (TRVA 50 - TRVA 65) Lantern construction : available for all TRVA 8

9 TRM (single stage vari-ported design monoblock) NEW 9

10 TRM (single stage vari-ported design monoblock) Vacuum range : up to Hg(V) max 33 mbar Suction pressure range : mbar(a) 50Hz : up to 165 ACFM or 280 m3/h 60Hz : up to 140 ACFM or 240 m3/h Max compression rate : ~ 30 ~29.92/1.02 Hg(A) or 1013/33 mbar(a) Number of sizes available : (TRMB for 50Hz markets) Construction : overhung design e-motor shaft mounted 10

11 TRVX (single stage vari-ported new design) 11

12 TRVX (single stage vari-ported new design) Vacuum range : up to Hg(V) - max 33 mbar Suction pressure range : mbar(a) 50Hz : up to 165 ACFM or 280 m3/h 60Hz : up to 140 ACFM or 240 m3/h Max compression rate : ~30 ~29.92/1.02 Hg(A) or 1013/33 mbar(a) Number of sizes available : 4 (TRVX TRVX 1257), more size under development X construction : port plates separate from pump casings in stainless steel Construction : bilateral support Lantern construction : up to 40HP (50Hz); up to 50HP (60Hz) to fit flanged e-motors 12

13 TRVK-TRSK (single stage King Size) 13

14 TRVK-TRSK (single stage King Size) TRVK vacuum range : up to 28.7 Hg(V) 40 mbar TRSK vacuum range : up 24 Hg(V) 200 mbar TRVK suction pressure range : mbar(a) TRSK suction pressure range : mbar(a) Capacity : up to 17,500 ACFM or 30,000 m3/h TRVK max compression rate : ~24 ~29.92/1.22 Hg(A) or 1013/40 mbar(a) TRSK max compression rate : ~5 ~29.92/6 Hg(A) or 1013/200 mbar(a) Number of sizes available : 8 x TRVK + 12 x TRSK Shaft construction : dry execution with sleeves Construction : bilateral support 14

15 TRADITIONAL PUMPS NOMENCLATURE T = Travaini R = liquid ring TRHC /C-M/GH S = single stage; H = two stages; V = single stage vari-ported design; M = single stage monoblock design A; B; C; E = Design number 80 = flanges diameter in mm 750 = nominal capacity in m3/h at 50Hz C = single mech. seal; C2 = double mech. seal; B = packing gland M = closed coupled construction design lantern F; GH; RX; RZ; RA; A3; = materials of construction 15

16 NEW PUMPS NOMENCLATURE TRVX 1007/C-M/F T = Travaini R = liquid ring V = single stage vari-ported design X = stainless steel port plates 100 = flanges diameter in mm 7 = pump size C = single mech. seal; C2 = double mech. seal; B = packing gland M = closed coupled construction design lantern F; RX; RZ; RA; A3; = materials of construction 16

17 SA0 (Double Acting, Liquid Ring Compressors) 17

18 SA0 (Double Acting, Liquid Ring Compressors) Capacities up to 106 SCFM m 3 /h Pressure up to 160 PSIG 11 bar Pressure range : PSIG (2-11 bar) Number of models/sizes available : 3 SA0E3U (40 SCFM max / max 160 PSIG) SA0G2D (65 SCFM max / max 120 PSIG) SA0G2G (105 SCFM max / max 120 PSIG) 18

19 SA0 COMPRESSORS NOMENCLATURE SA 0 G 2 G / C - GH SA = Double acting liquid ring compressor 0 = Design number G; E = Flange Size: E = 32 mm ; G = 50 mm ; 2; 3 = Number of impellers D ; G ; U = 1 st stage impeller dimension: D = 60 mm ; G = 90 mm ; U = 46 mm C ; C2; B = Shaft sealing type: C = mech. Seal ; C2 = double mech. Seal ; B = Packing seal GH ; RA ; A3 = Materials of construction 19

20 MATERIAL CODES VDMA N Description F GH RX RZ RA A3 106 Suc. casing 107 Dis. casing Port plate Cast iron Imp. housing Shaft AISI 420 AISI Manifold Carbon steel Bearing hous. Cast iron 230 Impeller Ductile iron Bronze AISI 304 AISI 316 AISI 316 AISI

21 VACUUM PACKAGES HYDROSYS HYDROPACK OILSYS HYDROTWIN OILTWIN Liquid ring vacuum systems with service liquid (water, oil or others ) recirculation 21

22 HYDROSYS 22

23 HYDROSYS Vacuum range : up to Hg(V) Suction pressure range : mbar(a) 50Hz : up to 1900 ACFM or 3200 m3/h 60Hz : up to 2200 ACFM or 3700 m3/h Service liquid : water (over 90% of cases) Recirculation : total or partial Heat exchangers : tube (liquid/liquid cooler), plates (liquid/liquid cooler), radiator (air/liquid cooler) Sizes available : 7 (from Hydrosys 2 to Hydrosys 8) Pump lantern construction : up to 40HP (50Hz); up to 50HP (60Hz) to fit flanged e-motors Accessories : available according to working conditions and on customer specification 23

24 HYDROPACK 24

25 HYDROPACK Vacuum range : up to Hg(V) Suction pressure range : mbar(a) 50Hz : up to 500 ACFM or 950 m3/h 60Hz : up to 600 ACFM or 1000 m3/h Service liquid : oil Recirculation : total and partial Heat exchangers : radiator air/liquid cooler), Sizes avaiiable : (from Hydropack 2; 4; 5; 6) Pump lantern construction only : up to 40HP (50Hz) to fit flanged e-motors Accessories : standard included, others limited by space 25

26 OILSYS 26

27 OILSYS Vacuum range : up to Hg(V) Suction pressure range : mbar(a) 50Hz : up to 950 ACFM or 1600 m3/h 60Hz : up to 1000 ACFM or 1700 m3/h Service liquid : oil Recirculation : total Heat exchanger : radiator air/liquid cooler), Sizes avaiiable : 6 (from Oilsys 2 to Oilsys 7) Pump lantern construction : available on request, up to 40HP (50Hz) Accessories : standard included, available according to working conditions and on customer specification 27

28 OILPACK 28

29 HYDROTWIN - OILTWIN 29

30 HYDROTWIN - OILTWIN Vacuum range : up to Hydro Oil 29,86 Hg(V) Suction pressure range : Hydro Oil mbar(a) 50Hz : up to 1500 ACFM or 2500 m3/h 60Hz : up to 2100 ACFM or 3500 m3/h Service liquid : Hydrotwin water OilTwin oil Recirculation : Hydrotwin total or partial Oiltwin total Heat exchangers : Hydrotwin Shell & tubes (liquid/liquid cooler), plates (liquid/liquid cooler) Oiltwin radiator (air/oil cooler) Sizes available : 8 and more both Hydrotwin and Oiltwin Pump lantern construction : up to 40HP (50Hz); up to 50HP (60Hz) to fit flanged e-motors Accessories : available according to working conditions and on customer specification 30

31 CENTRIFUGAL PUMP MONOSTAGE TCH (close impeller design) TCT (vortex impeller design) TCA (fully open impeller between wear plates design) TCD (close impeller design, oil thermal fluids version construction) MCU-CH (close impeller design) TCK (close impeller magnetic driven design) TCHM-TCTM (derivate from TCH and TCT monoblock design with grease lubricated bearing) 31

32 TCH 32

33 TCH Capacity : up to 500 m3/h 2600 USGPM Total head : up to 16 bar 475 feet Number of size available : 33 Pumped medium type : clear liquids Pumped medium temperature : from -40C (-40 F) till 280 C (536 F) in function of materials of construction and pumped liquid Standards: ISO 2858 (DIN 24256) performance and dimensions; optional ISO 5199 construction Construction variant : U2 jacketed heated casing, T cooling/heating chamber Sealing arrangements : several including the most diffused packing gland, single & double mech., single & double cartridge, etc Support : overhung with 3 oil lubricated ball bearings Lantern construction : available on all pumps to fit flanged e-motors 33

34 ISO These two norms are ruling the way to design and build the pumps for chemical application in Europe and all the NON-ANSI world. ISO 2858 points: Designation. Static pressure test parameters. Sizes (Inlet/Outlet/Impeller diameters),. Nominal working conditions (RPM-Flow-Head). pump main overall dimensions. ISO 5199 (108 pages!) main points: Nominal power of motor considering pump absorbed power. One block impeller (closed, semi-open or open type). Shaft dimensions, eccentricity and deflection. Rotating bearings (ball/needle) life 17,500 hours minimum. Hydrostatic test parameters. Forces acting on flanges (resistance of flanges). Vibrations limit. Allowable corrosion thickness on castings (minimum 3 mm ). 34

35 TCT 35

36 TCT Capacity : up to 250 m3/h 1200 USGPM Total head : up to 7 bar 320 feet Number of size available : 21 Pumped medium type : liquids with suspended solids or filaments (in limited percentage) and muddy as viscous liquids Pumped medium temperature : from -40C (-40 F) till 280 C (536 F) in function of materials of construction and pumped liquid Standards: ISO 2858 (DIN 24256) performance and dimensions (except for length); optional ISO 5199 construction Sealing arrangements : several including the most diffused packing gland, single & double mech., single & double cartridge, etc Support : overhung with 2 oil lubricated roll bearings Lantern construction : available on all pumps to fit flanged e-motors 36

37 TCA 37

38 TCA Capacity : up to 100 m3/h 280 USGPM Total head : up to 10 bar 300 feet Number of size available : Pumped medium type : liquids containing abrasive compounds (such as vegetable oils with bleaching earths) Pumped medium temperature : from -40C (-40 F) till 280 C (536 F) in function of materials of construction and pumped liquid Standards: ISO 2858 (DIN 24256) performance and dimensions (except for length); optional ISO 5199 construction Sealing arrangements : several including the most diffused packing gland, single & double mech., single & double cartridge, etc Support : overhung with 2 oil lubricated roll bearings Lantern construction : available on all pumps to fit flanged e-motors 38

39 TCD 39

40 TCD Capacity : up to350 m3/h 900 USGPM Total head : up to 10 bar 300 feet Number of size available : Pumped medium type : clear liquids Pumped medium temperature : from -40C (-40 F) till 320 C (608 F) in function of materials of construction and pumped liquid Construction : dimensions and characteristic in accordance ISO 2858/DIN Construction variant : U0 jacketed heated casing Sealing arrangement : single mech. Support : overhung with 2 oil lubricated roll bearings Lantern construction : not applicable 40

41 MCU-CH 41

42 MCU-CH Capacity : up to 1200 m3/h 3800 USGPM Total head : up to 6 bar 280 feet Number of size available : 7 Pumped medium type : clear liquids Pumped medium temperature : from -40C (-40 F) till 280 C (536 F) in function of materials of construction and pumped liquid Standards: ISO 2858 (DIN 24256) performance and dimensions* Construction variant : U2 jacketed heated casing, T cooling/heating chamber Sealing arrangements : several including the most diffused packing gland, single & double mech., single & double cartridge, etc Support : overhung with 2 oil lubricated roll bearings Lantern construction : not available * = some pumps are not in compliance with ISO 2858, because the norm does not cover those sizes 42

43 TCK 43

44 TCK Derivate from the TCH hydraulic and construction Capacity : up to 280 m3/h 900 USGPM Total head : up to 14 bar 500 feet Number of size available : 21 Pumped medium type : clear liquids Pumped medium temperature : from -40C (-40 F) till 250 C (480 F) in function of materials of construction and pumped liquid Standards: ISO 2858 (DIN 24256) performance and dimensions Construction variant : U2 jacketed heated casing magnet Sealing arrangements : magnetic coupling Support : overhung with 2 oil lubricated roll bearings Lantern construction : available on all pumps to fit flanged e- motors 44

45 TCHM - TCTM 45

46 TCHM - TCTM Derivates from TCH and TCT hydraulic construction TCHM Capacity : up to 500 m3/h 2200 USGPM TCHM Total head : up to 10 bar 320 feet TCHM Number of size available : 28 TCHM Pumped medium type : clear liquids TCTM Capacity : up to 200 m3/h 950 USGPM TCTM Total head : up to 7 bar 220 feet TCTM Number of size available : 18 TCTM Pumped medium type : liquids with suspended solids or filaments (in limited percentage) and muddy as viscous liquids Pumped medium temperature : from -30C (-22 F) till 140 C (285 F) in function of materials of construction and pumped liquid Sealing arrangements : single mech. seal Support : overhung with 1 grease lubricated roll bearing Lantern construction : only available on all pumps to fit flanged e- motors 46

47 PUMPS NOMENCLATURE TCH /1X-C/A3-M/U2-Z T = Travaini C = centrifugal single stage H = close impeller; T = vortex impeller; A = fully open impeller; D = thermal oil design 32 = discharge flange diameter 160 = nominal diameter of impeller 1X = constructive project C = type of shaft seal GS; RA; A3; HC; DU = materials of construction M = closed coupled construction design lantern U2-Z = special execution 47

48 TMA multistage centrifugal pumps Capacity : up to 45 m3/h 240 USGPM Total head : up to 40 bar 1300 feet Number of size available : 50 (50Hz market); 27 (60Hz) Pumped medium type : clear liquids Pumped medium temperature : from -10C (14 F) till 160 C (320 F) in function of materials of construction and pumped liquid Models at 50Hz : TMA 31-TMA 32-TMA 40 up to 15 stages and TMA 50 up to 12 stages Models at 60Hz : TMA 31-TMA 32-TMA 40 up to 9 stages and TMA 50 up to 8 stages Sealing arrangements : several including the most diffused packing gland, single & double mech. Support : bilateral with grease lubricated roll bearings Lantern construction : available on all TMA 31 and 32 to fit flanged e- motors TMA 31 and 32 available also in vertical execution 48

49 PUMPS NOMENCLATURE TMA 32-4/1-C/A3-M/T-V-Z T = Travaini M = centrifugal multi stages A = Max pressure 40 bar 32 = pump size 4 = number stages 1 = constructive project C = type of shaft seal F; FZ; RA; A3 = materials of construction M = closed coupled construction design lantern T-V-Z = special execution 49

50 TBH-TBA multistage, side channel, self priming pumps 50

51 TBH-TBA multistage, side channel, self priming pumps Capacity : up to 70 m3/h 350 USGPM Total head : up to 40 bar 1100 feet Number of size available : 107 (50Hz market); 81 (60Hz) Pumped medium type : clear liquids Pumped medium temperature : from -10C (14 F) till 160 C (320 F) in function of materials of construction and pumped liquid Models at 50Hz : TBH 200; 290; 300; 310; 400; 500; 650 up to 8 stages and TBH 1000 up to 3 stages Models at 60Hz : TBH 200; 290; 300; 310; 400; 500; 650 up to 6 stages and TBH 1000 up to 3 stages 51

52 TBH-TBA multistage, side channel, self priming pumps Sealing arrangements : several including the most diffused packing gland, single & double mech. TBH Support : bilateral with 2 grease lubricated roll bearings or with element bushing + 1 grease lubricated roll bearing TBH available also in vertical execution (except TBH 1000) TBA Support : bilateral with element bushing + 1 grease lubricated roll bearing Lantern construction : available on all TBH-TBA to fit flanged e-motors (except TBH 1000) 52

53 PUMPS NOMENCLATURE TBH 403/1-C/A3-M/T-V-Z T = Travaini B = multistage side channel self priming H; A = type of construction 40 = pump size 4 = number stages 1 = constructive project C; R; RR; C2 = type of shaft seal GH; RA; A3; B2; GP = materials of construction M = closed coupled construction design lantern T-V-Z = special execution 53

54 THANKS FOR THE ATTENTION 54