2 Day Public Auction. Asset Sales, Inc.

Transcription

1 2 Day Public Auction Assets From Former MAJOR MANUFACTURER OF HEAVY TANKS, VESSELS AND WIND TOWERS 601 BENTON KELLY STREET SHREVEPORT, LOUISIANA TUESDAY, SEPTEMBER 27 TH and WEDNESDAY, SEPTEMBER 28 9:00 A.M. CDT Inspection: MONDAY, SEPTMEBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT 50 ROLLS 24 DIAMETER 12 X 6 BOLDRINI MODEL PSI 3-ROLL PRE-BEND DOUBLE PINCH BENDING ROLL REBUILT BY WHEELABRATOR 8 X 8 X 1 BOLDRINI 16 X 3 FLAT EASY WAY ANGLE BENDING ROLL 1 OF 24 WHEELABRATOR (8) WHEEL HORIZONTAL PLATE BLASTER 14 WIDTH Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, North Carolina Toll Free Fax info@asset-sales.com VIEW OF LARGE MANIPULATOR European Headquarters Unit 7, Branxholme Industrial Estate, Bradford Road, Brighouse, West Yorkshire, HD6 4EA, England, UK Tel Fax peteraml@asset-sales.co.uk Asset Sales (Canada) Inc Prospect Road Bayside, Nova Scotia, Canada B3Z1L5 Tel Fax gmuller@asset-sales.com

2 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT 50 ROLLS 12 X 6 BOLDRINI MODEL PSI 3-ROLL MECHANICAL DOUBLE PINCH BENDING ROLLS REBUILT 10 X 2-5/8 BERTSCH INITIAL PINCH BENDING ROLL NEW x 2-1/2 BRONX 3-ROLL HYDRAULIC DOUBLE PINCH BENDING ROLL 12 X 1-3/8 ROUNDO MODEL PAS ROLL DOUBLE PINCH HYDRAULIC BENDING ROLL (8) BENDING ROLLS 12 x 6 BOLDRINI Model PSI 3-Roll Mechanical Double Pinch Bending Rolls with Hydraulic Drop End, Roll Length 13, Capacity 12 x 6 Thick, Top Roll Diameter 50, Operator s Console, Approximate Shipping Weight 366 Tons, sn: x 2 ½ BRONX 3-Roll Hydraulic Double Pinch Bending Roll with Hydraulic Drop End, (Roll is Partially Disassembled, Was Rebuilt and in Process of Assembly) 12 x 1 3/8 ROUNDO Model PAS Roll Double Pinch Hydraulic Bending Roll with Capacity 144 x 1-3/8 Thickness, Overhead and Side Supports, Top Roll Diameter 22.85, Side Roll Diameter 17.72, Hydraulic Drop End, Floor Mounted (No Pit), 135 HP, ICP CNC Control, mfg.1997, sn: x 5/8 WEBB Model 15L Initial Pinch Bending Roll with Roll Diameter 15, Air Drop End, Motorized Adjustment, 40 HP, sn: x 2 5/8 BERTSCH Initial Pinch Bending Roll with 10 ½ Roll Length, 26 Top Roll Diameter and 28 Bottom Roll Diameter, Hydraulic Drop End, Interchangeable Top Rolls, P&H Joy Stick Controls, Motorized Adjustment, Roll Position Readouts, sn: M In Separate Location Grimmett Drive Shreveport, Louisiana (CONTACT AUCTIONEER FOR INSPECTION) 10 x 2 ROUNDO Model PAS600 4-Roll Double Pinch Hydraulic Bending Roll with Capacity 120 x 2 Thick, Hydraulic Drop End, Overhead and Side Supports, Top and Bottom Roll Diameter 23.62, Side Roll Diameter 19.1, Operators Pendant Station, 40 Fully Elevated Work Platform, Floor Mounted (No Pit), Digital Roll Position Read Outs, 170 HP, mfg.2006, sn: NEW X 2 ROUNDO MODEL PAS600 4-ROLL DOUBLE PINCH HYDRAULIC BENDING ROLL 10 x 1 3/8 LISSE Model CH35/40x30 4-Roll Bending Roll with Hydraulic Drop End, Portable Operators Control Console, Capacity 120 x 1 3/8 Thickness, Hydraulic Side Support, sn: x 5/8 BERTSCH #11 Initial Pinch Bending Roll with Roll Diameter 12 ½, Capacity 120 x ½ Thickness, Air Drop End, (2) 1 HP Front Wedge Motors, Motorized Adjustment, 20 HP Main, 10 HP Rear Roll Adjusting, sn:m8299

3 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT 10 X 1-3/8 LISSE 4-ROLL BENDING ROLL 8 X 8 X 1 BOLDRINI HORIZONTAL ANGLE BENDING ROLL 6 X 6 X 7/8 BOLDRINI HORIZONTAL ANGLE BENDING ROLL 4 X 4 X ½ KLING #1 VERTICAL ANGLE BENDING ROLL Want to Join Our Mailing List? Want to be Included in Blasts Announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure or be Removed from our Mailing List? Us at advertising@ass et-sales.com or Fax a Request to (704) ! < 3-1/2 X 3-1/2 X 7/16 BOLDRINI MODEL BSA14 HORIZONTAL ANGLE BENDING ROLL 12 X 5/8 WEBB MODEL 15L INITIAL PINCH BENDING ROLL 10 X 5/8 BERTSCH #11 INITIAL PINCH BENDING ROLL (4) ANGLE BENDING ROLLS 8 x 8 x 1 BOLDRINI Model BSA40 Horizontal Angle Bending Roll with Roll Diameter 24, Capacity Leg-In 6 x 6 x ¾, 8 x 3 Flat Hard Way, 16 x 3 Flat Easy Way, 30 HP, sn: x 6 x 7/8 BOLDRINI Model BSA36R Horizontal Angle Bending Roll with Roll Diameter 21, Capacity Leg-In 6 x 6 x ¾, 16 x 1-1/2 Flat Hard Way, 22 x 1-1/2 Flat Easy Way, 16 HP 4 x 4 x ½ KLING #1 Vertical Angle Bending Roll with Roll Diameter 18, Manual Adjustment, Trolley Control, sn: ½ x 3 ½ x 7/16 BOLDRINI Model BSA14 Horizontal Angle Bending Roll with Roll Diameter 12, Capacity Leg-In 2 ½ x 2 ½ x 3/8, 7 ½ HP, sn:

4 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT REBUILT BY WHEELABRATOR WHEELABRATOR (8) WHEEL HORIZONTAL PLATE BLASTER WITH 14 WIDTH LARGE MANIPULATORS HORIZONTAL PLATE BLASTER WHEELABRATOR 14 Wide (8) Wheel Horizontal Plate Blaster with 14 Width, 50 L Entry Conveyor, 40 L Exit Conveyor, (8) 40 HP Motors, Dust and Recycling System, Operator s Control Station, Rebuilt by WHEELABRATOR in 1996, sn: A VIEW OF RANSOME MANIPULATORS LARGE MANIPULATOR 36 x 20 PANDJIRIS Track Type Welding Manipulator with 36 Horizontal Boom Travel, 20 Vertical Travel, Flux Recovery, Lincoln DC 1000 Power Source 20 x 20 PANDJIRIS Track Type Welding Manipulator with 20 Horizontal Boom Travel, 20 Vertical Travel 20 x 20 PANDJIRIS Track Type Welding Manipulator with 20 Horizontal Boom Travel, 20 Vertical Travel, 1000 Amp Power Source, Welding Controls (2) 18 x 20 RANSOME Car Type Welding Manipulators with 18 Horizontal Boom Travel, 20 Vertical Travel, Flux Recovery, sn: x 18 PANDJIRIS Fixed Base Welding Manipulator with 18 Horizontal Boom Travel, 18 Vertical Travel, Flux Recovery 16 x 20 ARONSON JEM Track Type Welding Manipulator with 16 Horizontal Boom Travel, 20 Vertical Travel, Full Operators Platform, Wire Feed, Flux Recovery (24) WELDING MANIPULATORS 4 16 x 16 RANSOME Model SHD Track Type Welding Manipulator with Flux Recovery, sn: x 16 RANSOME Model SHD Track Type Welding Manipulator with 16 Horizontal Boom Travel, 16 Vertical Travel, Flux Recovery, 1000 Amp Lincoln DC Power Source, sn: x 16 RANSOME Model SHD Track Type Welding Manipulator with 16 Horizontal Boom Travel, 16 Vertical Travel, Flux Recovery, 1000 Amp Lincoln Power Source, sn: x 12 RANSOME Stationary Base Welding Manipulator with 16 Horizontal Boom Travel, 12 Vertical Travel 15 x 15 RANSOME Model EH Car Type Welding Manipulator with 15 Horizontal Boom Travel, 15 Vertical Travel, (2) 1200 Amp AC Sub Arc Power Sources, sn:782517

5 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT RANSOME MANIPULATORS WITH FULL PLATFORMS WELDING MANIPULATOR VIEW OF WELDING MANIPULATORS (2) 14 x 14 PANDJIRIS Track Type Welding Manipulators with 14 Horizontal Boom Travel, 14 Vertical Travel, Full Operators Platform, Power Source, Flux Recovery 12 x 20 RANSOME Track Type Welding Manipulator with Full Operators Platform, Wire Feed, Flux Recovery, Power Source 12 x 12 RANSOME Stationary Base Welding Manipulator with 12 Horizontal Boom Travel, 12 Vertical Travel, Swivel Base, Power Source, sn: x 12 RANSOME Car Type Welding Manipulator with 12 Horizontal Boom Travel, 12 Vertical Travel, sn: x 20 PANDJIRIS Car Type Welding Manipulator with 10 Horizontal Boom Travel, 20 Vertical Travel, 1000 Amp Power Source WELDING MANIPULATORS CONTINUED 5 WELDING MANIPULATORS WITH PLATFORMS 10 x 10 RANSOME Model 99 Track Type Welding Manipulator with Rack and Pinion Drive, 4 Travel on Bed, 10 Horizontal Boom Travel, 10 Vertical Boom Travel, sn: Fixed Boom Welding Manipulator with 13 Travel on Track, 9 Vertical Travel 8 x 8 PANDJIRIS Car Type Welding Manipulator with 8 Horizontal Boom Travel, 8 Vertical Travel, Wire Feed, Cooler, 500 Amp OTC Power Source 6 x 8 PANDJIRIS Car Type Welding Manipulator with 6 Horizontal Boom Travel, 8 Vertical Travel, Power Source 6 x 6 RANSOME Car Type Welding Manipulator with 6 Horizontal Boom Travel, 6 Vertical Travel, sn: x 6 Fixed Boom Track Type Welding Manipulator with 6 Horizontal Boom Travel, 6 Vertical Travel

6 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT 600 TON TELEDYNE READCO POWER AND IDLER TANK ROLLS MISCELLANEOUS TANK TURNING ROLLS (13) 10 SECTIONS RANSOME TAPERED FIT-UP ROLLS > MISCELLANEOUS SET UP ROLLS FOREIGN NATIONAL BIDDERS TO ATTEND AUCTION IN PERSON PLEASE VISIT OUR WEBSITE FOR IMPORTANT INFORMATION < MISCELLANEOUS RUBBER TIRED TURNING ROLLS MISCELLANEOUS RUBBER TIRED TANK TURNING ROLLS 1 OF 3 SETS OF TANK TURNING ROLLS TANK TURNING ROLLS Over (50) Sets of Tank Turning Rolls, Rubber Tires, Power and Idler, Variable Speed, From 40 to 150 Ton Capacity 600 Ton TELEDYNE Readco Power and Idler Tank Rolls with Steel Wheels, 38 Diameter x 22 Face, Maximum cc 92, Variable Speeds (3) 400 Ton TELEDYNE Readco Idlers with Steel Wheels 90 Ton PRESTON EASTIN Rubber Tank Turning Roll Set with Power and Idler, Variable Speeds 6000 lb Capacity WELDWIRE Tanker Pipe Set Power and Idler 6000 lb Capacity RANSOME Model RA31R Rubber Pipe Set Power and Idler Large QTY of Spare Wheels, Idler Rolls and Parts Large QTY of Spare Rubber Wheels for Tank Rolls FIT UP ROLLS (13) 10 Sections RANSOME Tapered Fit-Up Rolls 56 Length 4-14 L Fit-Up Rolls with Power Drive with 16 Diameter Rollers x 20 Face (3) Sets 45 L Fit-Up Rolls, (1) Power with (3) Idlers, 20 Diameter Wheels x 28 Face 6

7 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT 20 DIAMETER CAPACITY AUTOMATED HEAD WELDING SYSTEM WITH MANIPULATOR 40,000LB CAPACITY RANSOME MODEL 400P WELDING POSITIONER 600 TON VERSON HYDRAULIC C-FRAME DISHING PRESS (5) MOTORIZED TURNTABLES (2) 120 Diameter Motorized Turn-Tableswith 45 Degree Tilt Capability, 120 Diameter Support Arms Turn Tables (2) 72 Diameter Motorized Turn-Tables 60 Diameter Motorized Turn-Table (2) AUTOMATED HEAD WELDING SYSTEMS 20 Diameter Capacity Automated Head Welding System with Manipulator, Pie Cutting Attachment, Power Source, Welding Controls 16 Diameter Capacity Automated Head Welding System with Manipulator, Pie Cutting Attachment, Power Source, Welding Controls (2) DISHING PRESSES 1100 Ton ERIE Model 1734 Hydraulic C-Frame Dishing Press with 48 Throat, 48 x 72 T- Slotted Ram Face, sn: Ton VERSON Model HD2-84-G Hydraulic C-Frame Dishing Press with 84 Throat, 32 x 48 T-Slotted Ram Face, sn: TON ERIE MODEL 1734 HYDRAULIC C-FRAME DISHING PRESS (10) WELDING POSITIONERS 40,000 lb Capacity RANSOME Model 400P Welding Positioner with 72 Diameter Table with Gripper Arms, Variable Speed 20,000 lb Capacity RANSOME Model 200PX Welding Positioner with Adjustable Height, 60 Diameter Table, Variable Speed, sn: ,000 lb Capacity Welding Positioner with Boom Burning Attachment with 54 Square Table, Variable Speed 12,000 lb Capacity RANSOME Model 120PA Welding Positioner with 60 Diameter-Table, 31 Diameter 3-Jaw Chuck, Variable Speed, sn: ,000 lb ARONSON Welding Positioner with 48 Square Table, Variable Speed, Control Console 10,000 lb Capacity RANSOME Model 100P Welding Positioner with 48 Diameter Table, Gripper Arm, Variable Speed 5,000 lb Capacity RANSOM Model 5OP Welding Positioner with 48 L Table, Pendant, Variable Speed, sn: ,000 lb RANSOME Model 40P Welding Positioner with 50 Diameter Table, Variable Speed, sn: ,500 lb Capacity ARONSON Model HD25A Welding Positioner with 30 Square Table, 18 3-Jaw Chuck, Pendant, Variable Speed, sn: ,000 lb Capacity ARONSON Model SHD20A- PTVR2 Welding Positioner with 39 Diameter Table, Variable Speed, sn: ,000LB CAPACITY WELDING POSITIONER WITH BOOM BURNING ATTACHMENT (2) 72 DIAMETER MOTORIZED TURN-TABLES 60 DIAMETER MOTORIZED TURN-TABLE

8 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT FOREIGN NATIONAL BIDDERS TO ATTEND AUCTION IN PERSON PLEASE VISIT OUR WEBSITE FOR IMPORTANT INFORMATION 20,000 LB CAPACITY RANSOME MODEL 200PX WELDING POSITIONER 2,000 LB CAPACITY ARONSON MODEL SHD-20A-PTVR2 WELDING POSITIONER WELDERS (100 Plus) 300/400/500/1000/1200 Amp Arc Welders and Power Sources DRY ROD OVENS Large Quantity of PHOENIX Dry Rod Ovens ROBOTIC WELDER MATSUSHITA Robot Model AW8010 Manipulator with Controller, 6-Axis, 10 KW, mfg.1992, sn:2205 RANSOME WELDING POSITIONER ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING. MATSUSHITA ROBOT MODEL AW8010 MANIPULATOR WITH CONTROLLER MISCELLANEOUS WELDERS 2,500 LB CAPACITY ARONSON MODEL HD25A WELDING POSITIONER MISCELLANEOUS WELDERS 8 Want to Join Our Mailing List? Want to be Included in Blasts Announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure or be Removed from our Mailing List? Us at advertising@assetsales.com or Fax a Request to (704) !

9 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT 1 of 3 BEAIRD PORTABLE LONGITUDINAL INTERNAL SEAM WELDER (3) 12 INTERNAL LONGITUDINAL SEAM WELDING SYSTEMS 1 of 3 1 of 2 (3) 50 BEAIRD TELESCOPIC BOOM INTERNAL LONGITUDINAL SEAM WELDERS (2) BEAIRD 40 LENGTH RAIL TYPE INTERNAL LONGITUDINAL SEAM WELDERS 1 of 2 Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) ! We Pay Great Finder s Fees! 11 of of 3 (2) GULLCO MODEL GBM 28 PORTABLE PLATE BEVELLERS (3) 50 BEAIRD TELESCOPIC BOOM INTERNAL LONGITUDINAL SEAM WELDERS (9) INTERNAL LONGITUDINAL SEAM WELDERS BEAIRD Portable Longitudinal Internal Seam Welder with 50 Travel, Sub Arc 2-Headed Lincoln Welding Heads with Wire Feed (3) BEAIRD Telescopic Boom Internal Longitudinal Seam Welders, 50 Length (2) BEAIRD 40 Length Rail Type Internal Longitudinal Seam Welders with DC 1200 Power Source (3) 12 INTERNAL Longitudinal Seam Welding Systems with Built-In Rubber Tank Turning Rolls, Lincoln Controls, Power Source, Flux Recovery 9 (2) PLATE BEVELLERS (2) GULLCO Model GBM 28 Portable Plate Bevellers with Adjustable Angle, sn:

10 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT BEVELING HEAD FOREIGN NATIONAL BIDDERS PLEASE SEE OUR WEBSITE 21 X 100 ESAB AVENGER 2/7 CNC DUAL DRIVE BRIDGE TYPE BURNING MACHINE 16 X 120 ESAB AVENGER I-16 DUAL DRIVE BRIDGE TYPE PLASMA BURNING MACHINE VIEW OF PLASMA ANGLE HEAD 15 X 100 TRACK TYPE PLATE STRIPPER 3 PINES HYDRAULIC BENDER 12 DIAMETER BUGO MODEL SEO F WITH PIPE CUTTER 6 PINES HYDRAULIC BENDER PLATE STRIPPER 15 x 100 Track Type Plate Stripper with 15 Width x 100 Travel, (2) Oxygen/Acetelyn Triple Torches, (2) End with Triple Torches (2) PIPE BENDERS 6 PINES Hydraulic Bender Model 4 with 4 Schedule 80 Pipe Capacity, 6 x.165 Wall Tube, 24 Mandrel Length, Direct Acting Pressure Die, Diameter-A-Bend Control, Extended Base, sn: PINES Hydraulic Bender Model 2 with 2 Schedule 80 Pipe Capacity, 3 x.109 Wall Tube, Mandrel Extractor, sn: IRONWORKER P-70 PIRANHA Hydraulic Ironworker with Angles 5 x 5 x ½, Plates 1 x 6, Rounds 2, 70 Ton PIPE CUTTER 12 Diameter BUGO Model SEO F with Pipe Cutter, 20 Diameter 3-Jaw Chuck, 13 Bore, sn: (2) CNC FLAME CUTTING MACHINES 21 x 100 ESAB Avenger 2/7 CNC Dual Drive Bridge Type with 21 Width x 100 Travel, (2) Plasma Torches, (6) Oxygen Fuel Torches, (1) 3-Torch Oxy Bevel head, Water Table, (2) ESP AMP Plasma Power Sources, S26 VISION CNC Control, mfg.1998, sn:98-vis2c x 120 ESAB Avenger I-16 Dual Drive Bridge Type Plasma Burning Machine with Plasma Bevel Head, 16 Width x 120 Travel, Water Table, ESP600C 600 AMP Plasma Power Source, SPC VISION CNC Control, mfg.1998, sn: (4) PLATE BURNING 4 x 4 ARONSON Model IK1200J Track Type Burning Machine with (1) Oxy Fuel Torch, Tracer Table, Oxygen, sn: MERLIN Model Pak 15XC Thermal Arc Plasma Cutter, mfg.2001, sn: THERMAL Model T-21416A with Arc Pak 45, 400 Amp Plasma Cutter with Torch, sn:17983a ESAB Bugo Track Burner with Track (48 ) ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON- ONSITE BIDDING. < P-70 PIRANHA HYDRAULIC IRONWORKER

11 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT HYDRAULIC PRESS 350 Ton HPM Hydraulic Press with Bed Area 48 x 48, Downacting MISCELLANEOUS FABRICATING 5 x 5 ACORN Welding Table, 36 PANDJIRIS Gripper Chuck, K&E Portable Manipulator, (3) Industrial Flux Vacuums CNC VERTICAL MACHINING CENTER GIDDINGS & LEWIS 15V Numericenter 3-Axis CNC Vertical Machining Center with 40 ATC, #45 Taper, Table 40 x 90, 36 x 72 Travels, Height 40, Spindle Travel 14, 15 HP Drive, G&L 800 Numeripath CNC Control, sn: TON HPM HYDRAULIC PRESS GIDDINGS & LEWIS 15V NUMERICENTER 3-AXIS CNC VERTICAL MACHINING CENTER 1,000 TONS (4) PRESS BRAKES 1000 Ton x 20 PACIFIC Model K-1000 Hydraulic Press Brake with Distance Between Housings 146.5, Bed Size 24 x 20 L, Throat 20, Machined for Angles, Remote Foot Control, Electric Hoist on Monorail 175 Ton VERSON Model TA-910 Mechanical Press Brake with 12 O.A. Length, 10 6 B.H., Treadle, sn:6743 PRESS BRAKE DIES WITH RACK CNC VERTICAL BORING MILL GIDDINGS & LEWIS 48 Vertical Boring Mill with Table Diameter 48, Maximum Facing Capacity 60, Maximum Height Under Rail 60, Ram Travel 50, Speeds RPM, 48 Diameter 3-Jaw Chuck with (4) Faceplate Jaws, (1) Ram Head on Rail 12 Automatic Tool Changers, R.H.- Mounted, Auto Chip Conveyor, 75 HP DC Main Drive, 800 Numeripath CNC Control, sn: FOREIGN NATIONAL BIDDERS TO ATTEND AUCTION IN PERSON PLEASE VISIT OUR WEBSITE FOR IMPORTANT INFORMATION < 1000 TON X 20 PACIFIC MODEL K-1000 HYDRAULIC PRESS BRAKE Visit Our Website to See Upcoming Auctions & Join Our Mailing List TON VERSON MODEL TA-910 MECHANICAL PRESS BRAKE 11 GIDDINGS & LEWIS 48 VERTICAL BORING MILL

12 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT 32 X 120 CC VDF BOEHRINGER MODEL V800 ENGINE LATHE 16 X 78 CC LODGE & SHIPLEY LATHE 25 X 120 CC AMERICAN PACEMAKER SPRAY WELDING LATHE 16 X 108 CC LODGE & SHIPLEY LATHE 29 X 72 CC LEBLOND MODEL HD LATHE 25 x 168 CC AMERICAN PACEMAKER LATHE (7) LATHES 32 x 120 cc VDF BOEHRINGER Model V800 Engine Lathe with Max Swing 33, Spindle Bore 5, Speeds RPM, 4-Jaw Chuck, inch/metric Threading, Roller Steady Rest, Thread Dial, sn: x 72 cc LEBLOND Model HD Lathe with Hard Bed, Speeds to 1500 RPM, Thread Dial, 3-Jaw Chuck, Pan Bed and Coolant, sn:4nel x 168 cc AMERICAN PACEMAKER Lathe Style F with Max Swing Over Bed 30, Speeds to 800 RPM, Hardened Bed, 4-Jaw Chuck, (2) Steady Rests, Thread Dial, Pan Bed and Coolant,, sn: x 120 cc AMERICAN PACEMAKER Spray Welding Lathe with Swing 30, Hard Bed 17 x 40 cc WEBB Lathe with Swing in Gap 22, Hard Bed, Taper Attachment, Steady Rest, sn: x 108 cc LODGE & SHIPLEY Lathe with Max Swing 20, Speeds to 1160 RPM, Thread Dial, Hard Bed, sn:l x 78 cc LODGE & SHIPLEY Lathe with Max Swing 20, Speeds to 1160 RPM, Hard Bed, 3-Jaw Chuck, Thread Dial, sn:41580 ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING. FOREIGN NATIONAL BIDDERS * TO ATTEND AUCTION IN PERSON PLEASE VISIT OUR WEBSITE FOR IMPORTANT INFORMATION < CITIZEN MODEL F16 CINCON TWIN TURRET CNC TURNING CENTER 5 X 17 CARLTON RADIALDRILL 12 TURRET LATHE #2A WARNER & SWASEY Saddle Type Turret Lathe with 3-Jaw Chuck. CNC TURNING CENTER CITIZEN Model F16 Cincon Twin Turret CNC Turning Center Bar Feed with Fanuc Control, mfg.1989, sn:3360 (4) RADIAL DRILLS 5 x 17 CARLTON #5 MT Radial Drill with T- Base with Coolant, T-Slotted Box Table, Power Clamping, Rapid Traverse, Speeds to 1500 RPM, sn:3a x 12 FOSDICK #4 MT Radial Drill with Production Table, T-Base 4 x 11 CARLTON #4 MT Radial Drill with T- Slotted Base, T-Slotted Box Table, Speeds to 1500 RPM, sn:1a x 7 ARBOGA #4 MT Radial Drill with Box Table, T-Base Speeds to 1000 RPM

13 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT 5 TON FREE STANDING JIB CRANE 12 X 16 C-80 DO-ALL AUTOMATIC HORIZONTAL BAND SAW BRIDGEPORT VERTICAL MILL 16 DO-ALL VERTICAL BAND SAW 150 TON 25 TON AUX., WHITING OH CRANE WITH 75 SPAN HORIZONTAL BORING MILL 5 NILES #6 MT Floor Type Horizontal Boring Mill with Vertical Travel 72, Horizontal Travel 60, sn:23787 (3) VERTICAL MILLS #3 CINCINNATI Vertical Mill with 50 Taper, 15 x 64 Table, 36 Travel, sn:2a3vil HP MFG.PORT Variable Speed Vertical Mill with R-8 Taper, 9 x 42 Power Feed Table, Speeds to 5440 RPM, sn: HP BRIDGEPORT Model J Vertical Mill with R-8 Taper, Speeds to 2720 RPM, 9 x 42 Power Feed Table, sn:j THREADER 2 ½ LANDIS Landmaco Threader with Lead Screw Attachment, sn:2lx95 (2) SURFACE GRINDERS 6 x 18 HARIG Hand Feed Surface Grinder, 6 x 18 K.O. LEE Surface Grinder with 6 x 18 Permanent Magnetic Chuck (5) SAWS 8 Bench Type Chop Saw, 16 DO-ALL Vertical Band Saw, Welder/Grinder, 12 x 16 C-80 DO-ALL Automatic Horizontal Band Saw with 1 blade, sn: , 16 DEWALT Arbor Saw, DEWALT Portable Mitre Saw 2-1/2 LANDIS LANDMACO THREADER 160 TON SHAW BOX OH CRANE WITH 75 SPAN 125 TON WHITING OH CRANE WITH 62 SPAN (16) TOOL GRINDERS STRIPPIT Die Grinder K.O. LEE Tool and Cutter Grinder 14 HAMMOND D.E. Abrasive Grinder Universal Tool and Cutter Grinder 6 Belt/10 Disc Sander 3 #600 OLIVER Drill Grinder OPTIMA BENCH Type Drill Point Grinder/Checker, sn:b1595 #2 CINCINNATI Universal Tool and Cutter Grinder, sn:1d2til-304 CRANES AND HOISTS 160 Ton SHAW BOX OH Crane with Span 75, Radio, (2) 80 Ton Hoists 150Ton/25 Ton Aux., WHITING OH Crane with 75 Span, Radio 150 Ton BRIDGE with 100 Ton Hoist, Span 61, Pendant 125Ton WHITING OH Crane with 62 Span, Pendant KONE Double 7 ½ Ton Hoist Top Running OH Crane with Pendant, Span Ton KKI Electric Hoist with Motorized Trolley #2 CINCINNATI Universal Tool and Cutter Grinder, sn:1d2t5h-130 (2) 10 D.E. Abrasive Grinders 14 D. E. Abrasive Grinder 6 Vertical Belt Sander 12 HANSOM D. E. Pedestal Grinder 6 D. E. Bench Grinder 6 DAYTON D. E. Pedestal Grinder 5 Ton Free Standing Jib Crane (Large Capacity) 2 Ton Budget Free Standing Jib Crane (27) Jib cranes with 1 and 2 Ton Capacity Approximately 30 Jibs with Less Hoists (2) 2 Ton R&M Loadmate Electric Hoists 1 Ton CM Electric Hoist NILES FLOOR TYPE HORIZONTAL BORING MILL

14 AUCTION SALE DATE & TIME TUESDAY, SEPTEMBER 27 TH & WEDNESDAY 28 9:00 A.M. CDT 30,000LB CAPACITY HYSTER DIESEL FORKLIFT 8,000LB CAPACITY SKYTRAK MODEL 8042 MOBILE FORKLIFT GENERAL ELECTRIC SWITCHER WITH DUAL 6 CYLINDER CUMMINS DIESEL ENGINE (42) BARBER RAIL TRANSPORTERS, DUAL TRUCK DESIGN, 22 LONG (4) 40 L STEEL FLATBED R.R. CARS GENIE Z 30-N ELECTRIC BOOM MAN-LIFT WITH 500LB CAPACITY CHEVROLET SILVERADO 2500 HD PICK-UP, MFG.2003 < FORD F-250 SUPER DUTY PICK-UP DIESEL MFG.2004 Can t Attend the Sale, but Still Want to Bid? Visit and Register to Bid Live on BidSpotter! Live Webcast Bidding! Download Complete Auction Brochures, View Entire Lot Books and Sign Up to Join Our Mailing List! TAP DISENTEGRATOR 15KVA Electro-Arc Portable Tap Disintegrator, sn:9877 MISCELLANEOUS MACHINERY AND EQUIPMENT CINCINNATI Dividing Head with 15 Diameter 4-Jaw Chuck, 48 x 48 GIDDINGS & LEWIS Manual Rotary Table, 36 x 48 Manual Rotary Table, 12 Diameter Manual Rotary Table, 25 x 25 LUCAS Manual Rotary Table, (2) 25 Diameter Manual Rotary Tables, 15 Diameter Manual Rotary Table, 21 Diameter Manual Rotary Table, 54 x 16 Steel Layout Table, 14 x 48 Magnetic Chuck, 3 ½ GREENERD Arbor Press on Stand, Portable Steel Banding Cart, (2) MARSH Marking Machines, 4 KW ST HUPPERT Oven, Crane Maintenance Platform, Large Quantity of Portable Scrap Dump Hoppers, MB 72 Wide Sweeper Attachment for Streets, GRACO Portable Pump, MILWAUKEE Portable Magnetic Base Drill, ZERO Blast Cabinet with Collector, 17 x 40 Cabinet, sn:39716 FINISHING Vibratory Finishing Rotary Tumbler Harper Vibratory Finisher with 40 Diameter-Bowl, Timer and Controls, mfg.1992, sn:92v5397, Shop-Built Parts Tumbler AIR COMPRESSORS AND DRYERS 15 HP 3-Stage Air Compressor on Skid 25 HP SSR ingersoll-rand Model EP255E Rotary Screw Air Compressor (2) 7 ½ HP DeVilbliss Tank Mounted Air Compressors Gardner-Denver Model RNC125Ai Compressed Air Dryer (3) FORKLIFTS 30,000 lb Capacity HYSTER Diesel Forklift, 24,000 lb Capacity HYSTER Diesel Forklift, 8,000 lb Capacity SKYTRAK Model 8042 Mobile Forklift with 42 Lift MISCELLANEOUS MATERIAL HANDLING (5) WALKER 12 x 52 and 15 x 50 Crane Held Lift Magnets with 10,000 lb Capacity, (3) Forklift Boom Attachments, 11,000 lb Capacity THERN Motorized Winch with 250 L BOOM LIFTS CAT 800 Rent Electric Man-Lift, GENIE Z 30-N Electric Boom Man-Lift with 500 lb Capacity, 30 Weight, sn: HARPER VIBRATORY FINISHER WITH 40 DIAMETER-BOWL TRACTOR MX10 Case Tractor with Double Rear Wheels, 18.4R38 Tire Size, Enclosure with A/C (2) PICK-UP TRUCKS Ford F-250 Super Duty Pick-Up Diesel, mfg.2004 Chevrolet Silverado 2500 HD Pick-Up, mfg.2003 RAIL ROAD CARS (42) BARBER Rail Transporters, Dual Truck Design, 22 Long, (4) 40 L Steel Flatbed R. R. Cars TRACK MOBILE Track Mobile 95TM Car Mover LOCOMOTIVE GENERAL ELECTRIC Switcher with Dual 6 Cylinder Cummins Diesel Engines FLAT-BED TRAILERS (6) 40 L Flat Bed Trailers MISCELLANEOUS Micrometers, Verniers, Gages, Calipers, Weight Gages, 12 x 48 Set of Parallels, Miscellaneous Shop Furniture, Dishing Dies, Tapes and Dies, Punches and Dies, Press Brakes Dies with Racks, Shelving, Cabinets, Carts, Supply Cabinets, Spares, Supplies, New Tank Turning Roll Wheels, Fasteners, Hardware, Tables, Nock Vises, Steel Tables, Turntables, Milling Vises, Collets, Grinding Accessories, Grinding Wheels, Grinding Fixtures, Motors, Fans, Burning and Welding Supplies, Material Handling Equipment, Slings, Chains, Hooks, Tool Holders, Hand Tools, Electric Portable Tools, Drill Bits, End, R-8 Tooling, Electric Spares, Ladders, Shop Support, 32 Carbottom Furnace, ETC... SCRAP (100 TONS PLUS) Large Quantities of Scrap, Plate, Machines, R. R. Cars, Transfer Cars, ETC...

15 MACHINERY INSPECTION DATE & TIMES MONDAY, SEPTEMBER 19 TH THRU THE DAY OF THE SALE FROM 8:00 A.M. 4:00 P.M. CDT FOREIGN NATIONAL BIDDERS WHO WISH TO ATTEND IN PERSON REGISTRATION DUE 14 DAYS IN ADVANCE, SEND ALL PASSPORT INFORMATION TO ASSET SALES, INC. - THIS IS A GOVERNMENT CONTROLLED FACILITY ABBREVIATED TERMS & CONDITIONS OF AUCTION Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein. All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER S TERMS & CONDITIONS COMPLETE COPIES AVAILABLE AT No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale. All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000, naming Asset Sales, Inc. as the insured. ALL SALES ARE FINAL, ON AN AS IS WHERE IS, INPLACE, WITH ALL FAULTS BASIS. A 13% Buyer s Premium will apply to all onsite purchases and a 16% Buyer s Premium for online purchases. REGISTRATION & BIDDING ONLINE: If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions. Anyone outside of the continental United States is required to wire transfer a minimum deposit of $5000 to be approved for all non-onsite bidding. 15

16 Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive, Suite C Indian Trail, North Carolina Toll Free: Direct: Fax: Asset Sales, Inc. Louisiana License # AVAILABLE EXCELLENT 600 TON TELEDYNE READCO POWER AND IDLER TANK ROLLS Visit our website at to view all of our Upcoming Auctions, Download Complete Brochures, or to Register to Bid Online. Want to join our mailing list? Want to be included in Blasts announcing future auctions? Want to update your address? Curious to preview machines and tooling featured in an upcoming auction? Want to request a brochure? Or want to be removed from our mailing list? Just write the info on the back cover of this brochure and or fax it to us at: advertising@asset-sales.com or (704) DIRECTIONS FROM SHREVEPORT REGIONAL AIRPORT Turn Right onto Hollywood Ave go approximately LYNYRD SKYNYRD 2.5 miles. Turn Right onto N. Hearne Ave continue onto Mansfield Road MILWAUKEE for approximately IRON STREET.7 miles. SURVIVOR Turn Left onto Valley View Drive, continue onto W. 84 th Street for approximately 1 mile. Turn right onto St. Vincent Ave go approximately 1.6 miles. Turn Left onto Benton Kelly Street auction site will be on your right, follow auction signs to the plant. HOTELS HAMPTON INN & SUITES 8340 Millicent Way Shreveport, LA HOTEL Street COMFORT Address INN City, 9420 State Healthplex Zip Code Drive Telephone Shreveport, Number LA SAM S TOWN 315 Clyde Fant Parkway Shreveport, LA UPCOMING AUCTIONS SEPTEMBER 15th KARL T. HIEBER MACHINE SHOP Large Capacity Gear & Machining Facility Pipersville, PA OCTOBER 18 th Assets Formerly Owned By Southern Structures, LLC Fabricating Equipment Broussard, LA 2 DAY PUBLIC AUCTION Assets From Former MAJOR MANUFACTURERS OF HEAVY TANKS, VESSELS AND WIND TOWERS MANIPULATORS, TANK ROLLS, BENDING ROLLS ETC. 601 Benton Kelly Street Shreveport LA, TUESDAY, SEPTEMBER 27 9:00 A.M. CDT WEDNESDAY, SEPTEMBER 28 9:00 A.M. CDT