SPARE PARTS & TOOLS SAVE TIME AND MONEY WITH FAURE HERMAN SPARE PARTS AND TOOLS

Transcription

1 Counting every Drop SPARE PARTS & TOOLS For maximum operational reliability SAVE TIME AND MONEY WITH FAURE HERMAN SPARE PARTS AND TOOLS Faure Herman equipment is engineered for high reliability and performance. To assure the best performance of your meter regular maintenance and recalibration is recommended. Faure Herman offers you a wide range of calibrated cartridge, bearing kit, tools and other spare parts in order to keep your business running. Consider ordering your spare parts today will help reduce your downtime, maintenance time and cost. Contact your local Faure Herman representative to optimize your inventory maintenance schedule. CALIBRATED CARTRIDGE FOR TZN AND TLM Faure Herman TZN and TLM meters utilize a removable calibrated cartridge inserted into the body. The Faure Herman cartridge principle offers: Easy replacement of internals less than 5 min Limited downtime / interruption of service Time and money savings Interchangeable spare cartridges, calibrated with same conditions, for easy maintenance Ability to send only the cartridge for repair/calibration at Faure Herman laboratory Ability to rebuild/refurbish meters with just a few parts A spare cartridge assures you are never more than a few minutes away from having your meter operational again. 1

2 HELICAL TURBINE METER TZN : calibrated cartridge ordering information SEM_TZN STD - J1 - T - H B - D - D / CUS- CUS STD- Standard A- Acids 4 : Fluid type B- Industrial Alcohol C- Demineralized Water D- Sea Water E- Water G- LPG H- Hydrocarbons L- Beverages S- Solvents 1 : Type 2 : Model / Size A / 1/2" E / 1"1/2 K / 8" A / 1/2" E / 1"1/2 K / 8" B / 3/4" E / 1"1/2 L / 10" B / 3/4" F / 2" L / 10" C / 1" F / 2" M / 12" C / 1" F / 2" M / 12" C / 1" G / 3" N / 14" C / 1" G / 3" P / 16" D / 1"1/4 G / 3" P / 16" D / 1"1/4 H / 4" Q / 18" D / 1"1/4 H / 4" Q / 18" D / 1"1/4 J / 6" R / 20" E / 1"1/2 J / 6" E / 1"1/2 K / 8" 3 : Rotor / Internal Material A- Aluminium / SS T- Titanium / SS V- Titanium / Titanium 5 : Nb of product(s) 1-1 product 2-2 products 3-3 products 4-4 products 6 : Nb of points x Run(s) A- 6x1 B- 6x3 C- 6x5 D- 10x1 E- 10x3 F- 10x5 G- 8x5 H- 6x2 7 & 8 : Viscosity in cst (min/max) A- 0.6 J- 5 < V < 10 B- 1 K- 10 < V < 30 C- 1.6 L- 30 < V < 50 D- 5 M- 50 < V < 100 E- < 0.6 N- 100 < V < 200 F- 0.6 < V < 1 P- 200 < V < 350 G- 1 < V < 1.6 Q- 350 < V H- 1.6 < V < 5 9 : Linearity / Repeatability 01- ± 0.15 % / without 12- ± 0.30 % / 0.04 % 02- ± 0.15 % / 0.02 % 13- ± 0.50 % / without 03- ± 0.15 % / 0.04 % 14- ± 0.50 % / 0.02 % 04- ± 0.20 % / without 15- ± 0.50 % / 0.04 % 05- ± 0.20 % / 0.02 % 16- ± 1.00 % / without 06- ± 0.20 % / 0.04 % 17- ± 1.00 % / 0.02 % 07- ± 0.25 % / without 18- ± 1.00 % / 0.04 % 08- ± 0.25 % / 0.02 % 19- ± 0.1 % / without 09- ± 0.25 % / 0.04 % 20- ± 0.1 % / 0.02 % 10- ± 0.30 % / without 21- ± 0.1 % / 0.04 % 11- ± 0.30 % / 0.02 % xx- Other 10 : Calibration method 1- Single K factor 2- Multiple K factors 3- Viscosity Indexing 4- Master Meter 11 : Turndown ratio Defined by Faure Herman based on application 2

3 HELICAL TURBINE METER TLM : calibrated cartridge ordering information SEM_TLM A5 - A - H B - A - D / 1 : Model / Size A / 3" A / 3" A / 3" A / 3" A / 3" B / 4" B / 4" B / 4" B / 4" B / 4" 2 : Rotor / Internal Material A- Aluminium B- Titanium 3 : Fluid type A- Acids B- Industrial Alcohol C- Demineralized Water D- Sea Water E- Water G- LPG H- Hydrocarbons L- Beverages S- Solvents 4 : Nb of product(s) 1-1 product 2-2 products 3-3 products 5 : Nb of points x Run(s) A- 6x1 B- 6x3 6 & 7 : Viscosity in cst (min/max) A- 0.6 F- 0.6 < V < 1 B- 1 G- 1 < V < 1.6 C- 1.6 H- 1.6 < V < 5 D- 5 J- 5 < V < 15 E- < 0.6 X-Other 8 : Linearity / Repeatability 01- ± 0.15 % / without 06- ± 0.25 % / 0.04 % 02- ± 0.15 % / 0.04 % 07- ± 0.30 % / without 03- ± 0.20 % / without 08- ± 0.30 % / 0.04 % 04- ± 0.20 % / 0.04 % xx- Other 05- ± 0.25 % / without 9 : Turndown ratio Defined by Faure Herman based on application 3

4 MECHANICAL PARTS FOR TURBINE METERS : BEARING KIT Bearing kit for TZN 2" Bearing kit for TZN 3" Bearing kit for TZN CUS Bearing kit for TZN BNAE Bearing kit for TCX Turbine Bearing ref Bearing ref Model Type (Carbide) (Graphite) TZN STD TZN STD 16-xxx (1/2") L00019 L00020 TZN STD 20-xxx (3/4") L00021 L00022 TZN STD 25-xxx (1") L00023 L00024 ZN STD 32-xxx (1" 1/4) L00025 L00026 TZN STD 40-xxx (1" 1/2) L00025 L00026 TZN STD 50-xxx (2") L00003 L00027 TZN STD 80-xxx (3") L00028 L00029 TZN STD 100-xxx (4") L00013 L00005 TZN STD 150-xxx (6") L00014 L00006 TZN STD 200-xxx (8") L00009 L00031 TZN STD 250-xxx (10") L00010 L00032 TZN STD 300-xxx (12") L00015 L00007 TZN STD 350-xxx (14") L00016 L00008 TZN STD 400-xxx (16") L TZN STD 450-xxx (18") L TZN CUS TZN CUS 80-xxx (3") TZN CUS 100-xxx (4") TZN CUS 150-xxx (6") TZN CUS 200-xxx (8") TZN CUS 250-xxx (10") TZN CUS 300-xxx (12") TZN CUS 350-xxx (14") TZN CUS 400-xxx (16") TZN CUS 450-xxx (18") TZN BNAE TZN BNAE 16 (1/2") L00019 L00020 TZN BNAE 20 (3/4") L00021 L00022 TZN BNAE 25 (1") L00023 L00024 TZN BNAE 32 (1" 1/4) L00025 L00026 TZN BNAE 50 (2") L00003 L00027 TLM TLM 3-30 / TLM 3-50 (3") L00003 L00027 TLM 3-70 / TLM / TLM (3") L00028 L00029 TLM 4-70 / TLM / TLM (4") L00028 L00029 TLM / TLM (4") L00013 L00005 TCX Gen2 TCX 25-xxx (1") L00056 L00060 TCX 32-xxx (1" 1/4) L00057 L00061 TCX 40-xxx (1" 1/2) L00058 L00062 TCX 50-xxx (2") L00059 L00063 TCX 80-xxx (3") L00036 L00037 TCX 100-xxx (4") L00038 L00039 TCX 150-xxx (6") L00040 L00041 TCX 200-xxx (8") L00042 L00043 TCX 250-xxx (10") L00044 L00045 TCX 300-xxx (12") L00046 L

5 ELECTRICAL SPARE PARTS FOR TURBINE METERS Pick-up coils kit /1 kit kit /1 kit (cable 5m) kit PC Pick-up coil kit Pick-up coil Pick-up coil PC45-25 Preamplifiers FH710 Standard 2 wires FH710 Standard 2 wires sensitive FH710 Namur FH710 Namur sensitive FH710 Open collector Preamplifier FH710 Enclosure parts* UL/cUL Enclosure kit with FH710 standard 2 wires SS UL/cUL Enclosure kit with FH710 Namur sensitive SS UL/cUL Enclosure kit with FH710 open collector SS ATEX/IECEx Enclosure kit for FH boss SS ATEX/IECEx Enclosure kit for 1"NPT FH boss SS "NPT FH boss adapter SS "NPT Thermal extension SS *Consult the factory for enclosure compatibility and certification for your material. UL/cUL enclosure kit certified : Class 1 div 1 Group C&D ATEX/IECEx enclosure kit certified : II2G Ex d IIC T6 Gb UL/cUL Enclosure kit ATEX/IECEx Enclosure kit for FH boss 1"NPT FH boss adapter 1 NPT Thermal extension Retaining ring kit L00035 Small TZN boss block Enclosure cover gasket Enclosure gasket

6 SPARE PARTS FOR ULTRASONIC METER FH8300/FH8400 transducer ( 12") or (>12") FH8500 transducer 1 Mhz (>12") FH8500 transducer 2,25 Mhz ( 12") FH8300 Electronic set FH8400 Electronic set FH8500 Electronic set Infrared Remote control F10101 SPECIFIC TOOLS To assemble the parts, some needed specific tools are defined and can be provided. Wrench for enclosure Tool for coil extraction Tool for coil assembly Tool for coil threaded adapter Tool for PC45-25 coil assembly FH8500 transducer extractor

7 Tool for threaded cartridge assembly Small size TZN STD and TZN BNAE Tool for TLM cartridge assembly Tool for TZN CUS bearing replacement TZN BNAE 16 (1/2") TZN BNAE 20 (3/4") TZN BNAE 25 (1") TZN BNAE 32 (1" 1/4) TZN BNAE 50 (2") TZN BNAE 16 (1/2") TLM 3-30 / TLM 3-50 (3") TLM 3-70 / TLM / TLM (3") TLM 4-70 / TLM / TLM (4") TZN CUS 80 (3") TZN CUS 100 (4") TZN CUS 150 (6") TZN CUS 200 (8") TZN CUS 250 (10") TZN CUS 300 (12") TZN CUS 350 (14") TZN CUS 400 (16") TZN CUS 450 (18") TZN CUS 500 (20") Tool for shaft assembly TZN STD 80 (3") TZN STD 100 (4") TZN STD 150 (6") TZN STD 200 (8") TZN STD 250 (10") TZN STD 300 (12") TZN STD 350 (14") TZN STD 400 (16") TZN STD 450 (18") Tool for TCX threaded crosspiece TCX 80 (3") TCX 100 (4") TCX 150 (6") TCX 200 (8") TCX 250 (10") TCX 300 (12") Other spares are available. Please consult Faure Herman for more information. 7

8 ONLINE SHOP FOR SPARE PARTS & TOOLS Faure Herman offers you a reliable spare parts & tools service. It s available online at any time - the spare parts you need is just a click way. Log on website. CONTACT FAURE HERMAN FOR ALL YOUR METERING NEEDS FAURE HERMAN FAURE HERMAN METER USA FAURE HERMAN DUBAÏ Route de Bonnétable BP La-Ferté-Bernard Cedex FRANCE 4702 North Sam Houston Parkway West Suite 100 Houston, TX (U.S.A) Office #738, Building #6EB Dubai Airport Freezone (DAFZA) Dubaï (U.A.E) Tel : +33 (0) Tel : Tel : Fax : +33 (0) Fax : Fax : fhprojects@idexcorp.com FHH-Sales@idexcorp.com fhsalesme@idexcorp.com This document is not contractual, Faure Herman maintains the right to modify certain characteristics without notice. Ref Spare parts & tools 01/2016 ENERGY & FUELS 8