LED Batten Light. LED Batten Light SPEC L02GTC. 150lm/W Ultra Bright Easy installation Security lock L02GTC

Transcription

1 D Batten ight SPC 02GTC Replace traditional tube fixture Office Supermarket Park Other Application D Batten ight 02GTC 150lm/W Ultra Bright asy installation Security lock [ CB ] (Applying) PC 850 C IK03 Rated voltage Frecuency + 40 C V 50-60Hz -20 C 01

2 1.Features asy installation ens Module Can directly & quickly replace lens module asymetric distribution Double symmetric design Three line terminals inkable without connector Security lock Standard BSA and conduit entry 02

3 D Batten ight Can replace traditional tubes fixture Provide ceiling mounted and retrofit installation way Save 50% energy and label cost 2 ways of installation greatly save the costs of the installation Universal AC input VAC Ultra bright 150lm/w Unique light distribution design for comfortable optic performance Unique heatsink design for stable product performance Product automatic protection (OVP OP OTP OCP) Special design for 2-8m application high 2.Application Office Corridors and stairways,meeting rooms,ntrance areas, Open-plan offices,offices,sanitary areas ducation Classrooms,Cafeteria,Auditorium,Sports halls Health & Care ormal care,intensive care,or sector, xamination rooms,sanitary areas Shop & Retial Shopping mall,supermarkets,retail stores Architectural xhibition center,ibrary,art Museum Concert hall,museum 3.Product Dimension B A C Model O. Size A(mm) Size B(mm) Size C(mm) 02GTC 600mm GTC 0mm 0 02GTC 1500mm GTC 1800mm Parameter Technical product information Model O. Power (W) Clear umens Cover m/w 02GTC 600mm Operating: -20~+40 Storage : -40~+85 PF: 0.93 THD<20% Power fficiency: 0.90 ight Source : 2835 CRI Range : 80 / 90 / 95 02GTC 0mm Certification : C AC Input : V 50/60Hz 02GTC0mm GTC 1500mm GTC 1800mm Above lumens based on 4000K Ra : 80 Beam Angle : 30 /60 /90 Waterproof : IP20 & IK03 CCT Range : WW(3000K) W(4000K) DW(5000K) CW(6500K) Size : 87(W)*56.7(H) ight fficiency(clear) : m/w (Standard), 150m/W(High efficiency) Recommended Installation Height : 2-8M Function : Dimmable Motion sensor mergency inkable 03

4 5.Accessory part number matrix Mounting Accessories Accessories IMAG DSIGTIO MATRIA DSCRIPTIO QUATITY ACCSSORY US Standard 01 SCRW Stainless steel 4X20mm 2PCS Used for the absorption of Ceiling Mounted. Optional 02 SUSPDIG CAB Stainless steel 1M/2M 2PCS Used for the absorption of Suspending. 6.Installation inkable C Cable Standard 1. 3*1.5mm². 2. VD U Standard waterproof outdoor cable US: U: ote(us): Black White Green ote(u): Brown Blue Green+Yellow How many D fixtures we could connect on one Input Voltage Max Qty Size Cable (mm) Input Voltage Max Qty Size Cable (mm) 100VAC/20W VAC/20W VAC/36W VAC/36W VAC/54W 6 230VAC/54W VAC/64W 5 230VAC/64W 11 Fixing Hole Centre 600mm BSA and conduit entry 532mm / 1131mm / 1431mm / 1721mm Ceiling Mounted and Suspending 04

5 A.Ceiling Mounted(Back rack) Min 1.0mm² lectric drill Screw Screw driver a: Make a right position and screw hole b Screw the fixture base on the ceiling tightly inear D ight Fixture ote : pls lock the side clips. ock and then cover the lid c: Install the lamp into the fixture base. d: ocking the fixture on the side. B.Ceiling Mounted(The side line) Min 1.0mm² Screw lectric drill Screw driver Open the threading hole a: Make a right position and screw hole b Screw the fixture base on the ceiling tightly inear D ight Fixture ock and then cover the lid ote : pls lock the side clips. c: Install the lamp into the fixture base. d: ocking the fixture on the side. 05

6 C.Suspending(Back rack) Steel cable Min 1.0mm² lectric drill a : Make a right position and screw hole b : Screw the steel cable onto the ceiling inear D ight Fixture c : Hung the fixture under the steel cable and secure the fixture by steel cable ote : pls lock the side clips. ock and then cover the lid d: Adjust the position of the fixture and clean it.. D.Suspending(The side line) Steel cable lectric drill a : Make a right position and screw hole b : Screw the steel cable onto the ceiling inear D ight Fixture c : Hung the fixture under the steel cable and secure the fixture by steel cable ote : pls lock the side clips. ock and then cover the lid d: Adjust the position of the fixture and clean it. Please ote:all the operations must be in the condition of power off 06

7 7.Packaging P inear D ight Fixture P A.Packing list Sequence umber 1 2 Model O. D Batten ight Screw Quantity 1pcs 2pcs 3 Manual 1pcs B.Packing Data Model o Single Box Pcs/CT Meas(mm) 02GTC 600mm x262x242 02GTC 0mm x262x242 02GTC 1500mm x262x242 02GTC 1800mm x262x242 8.Attention This specification is for reference only,we reserve the right to change without notice.if you need the updated info,please contact local distributors or visit our website at RVA reserves the right of final explanation. 07