Direct Drive Centrifugal Exhausters Low Profile Roof/Sidewall and Roof Downblast

Transcription

1 Direct Drive Centrifugal Exhausters Low Profile Roof/Sidewall Roof Downblast Models LPD & RED LPD Applications/Construction LPD Performance/Dimensions RED Applications/Construction RED Performance/Dimensions Additional Products Breidert Air Products, Div. of Soler & Palau Ventilation Group, certifies that the Models LPD & RED shown herein are licensed to bear the AMCA Seal. The ratings shown are based on test procedures performed in accordance with AMCA Publication 211 AMCA Publication 311 comply with the requirement of the AMCA Certified Ratings Program. LPD/RED January

2 MODEL LPD LOW PROFILE DIRECT DRIVE CENTRIFUGAL ROOF/SIDEWALL EXHAUSTER Features Ultra Low Profile AMCA Air & Sound Licensed culus Listed-Stard 705 (optional) UPS Shipping Carton 5 Year Housing Warranty Up To 140 F Airstream Temperature Roof or Sidewall Mount Construction Aluminum Construction Stainless Steel Exterior Fasteners Backward Curved Centrifugal Wheel Aluminum Birdscreen Conduit Wiring Chase Service Disconnect Switch Precision Balanced to ISO Stard 1940 Motor Unique External Rotor Design Permanently Lubricated Bearings 3 Year Motor Warranty Internal Thermal Protection 100% Speed Controllable 115V, 230V 60/50 Motor Options Totally Enclosed Continuous Duty Size Damper Roof Opening Dimensional Data Curb A B C Average Ship Wt. Lbs /4 14-3/4 16-1/ / /4 14-3/4 16-1/ /2 15 Model LPD LPD06A60 115/1/60 LPD08A60 115/1/60 LPD06C60 230/1/60 LPD08C60 230/1/60 Model LPD LPD06C50 230/1/50 LPD08C50 230/1/50 Performance certified is for installation type A-free inlet, free outlet. Performance ratings include the effects of birdscreen in the airstream. The sound ratings shown are loudness values in fan 5 (1.5m) in a hemispherical free field calculated per AMCA Stard 301. Values shown are for installation Type A-free inlet fan sones levels. Speed () shown is nominal. Performance is based on actual speed of test. 60 Hz Static Pressure 0 1/8 1/4 3/8 1/2 5/8 3/ /4 1 1/2 1 3/4 50 Hz Breidert Air Products, Div. of Soler & Palau Ventilation Group, certifies that the Models LPD shown herein are licensed to bear the AMCA Seal. The ratings shown are based on test procedures performed in accordance with AMCA Publication 211 AMCA Publication 311 comply with the requirement of the AMCA Certified Ratings Program. Max Motor Watts & Amps / /2" / / / Static Pressure 0 1/8 1/4 3/8 1/2 5/8 3/ /4 1 1/2 1 3/4 Max Motor Watts & Amps / /2" / Stard 705 (optional) S&P patented motorized impellers typically exceed manufacturer s ratings as shown in the AMCA certified performance table above. Motor manufacturer s published ratings are: LPD06A60: 115/1/60/TE, 2600 LPD06C60: 230/1/60/TE, 2600 LPD06C50: 230/1/50/TE, 2500 LPD08A60: 115/1/60/TE, 3050 LPD08C60: 230/1/60/TE, 3050 LPD08C50: 230/1/50/TE,

3 MODEL RED DIRECT DRIVE CENTRIFUGAL ROOF EXHAUSTER Application Model RED direct drive units are roof mounted centrifugal exhausters rated from 46 to over 3000 CFM, with static pressure capabilities to 1 inch. They are used to exhaust air from all types of commercial institutional buildings such as hospitals health care facilities, schools, recreational buildings, machinery equipment rooms, offices, retail stores similar applications. The nonoverloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or nonducted applications. Its roof mounting permits location near the area to be ventilated, allowing short duct runs more efficient operation. The spun aluminum exterior provides an attractive appearance is compatible with belt driven Model DB companion gravity units to make up a complete ventilation system. Direct drive units use smaller diameter wheels with lower rpm's resulting in low sound levels quiet operation. They have no belts or fan bearings to maintain or adjust consequently require very little maintenance. Construction/Specification Checklist Housing Curb cap has integral deep spun inlet for efficient performance prepunched mounting holes for ease of installation. Fan plate isolates motor compartment from contaminated exhaust air. Spun aluminum hood skirt for weather protection attractive appearance. Heavy-gauge motor support for rigidity strength. Neoprene isolators for reduction of vibration sound. Quick access to motor compartment for ease of maintenance. Conduit passage for easy electrical connection from below roof. Birdscreen disconnect are included on stard models; (excluding explosion proof 2-speed motors). UL Label UL 705 Listing assures electrical reliability. UL 705 must be specified when required. Options/Accessories Solid State Speed Control: Breidert's solid state control is matched to the motor blower wheel to allow continuous reduction in performance allowing adjustments of airflow for system balancing. CFM is reduced in direct proportion to motor speed reduction. Speed control is available for 115 or 230 volt single phase. Exhauster performance can be controlled from the ventilated area. Roof Curb: Prefabricated heavy-gauge galvanized steel welded construction, 12" high with 1-1/2" wood nailer. Assures perfect fit of exhauster to roof curb. Options include burglar bars, single double pitch construction, additional curb heights. Sound Curb: Option of thermal acoustical lining or a complete maximum sound attenuating baffle system. Provision for mounting damper is available. Contact factory for information regarding effect on exhauster air performance sound level. Motor Operated Aluminum Damper: Motor operated for positive closure against backdraft. Automatic Damper: Automatic aluminum damper for ease in installation effective backdraft protection. Companion Gravity Units: Model RCX-II comes in a wide range of sizes air capacities to provide relief or intake air to the system. Curbs dampers are available to fit all sizes. Spun aluminum hoods provide a pleasing appearance, complementing the Model RED exhauster. Curb Hinge Arrangement: The curb hinge arrangement provides easy access to the exhaust fan, backdraft damper, duct for servicing cleaning. Wheel Backward inclined for efficiency at higher static pressure. Nonoverloading for safe operation in ducted systems. Tapered blades for efficiency quiet operation. Wheels constructed of noncorrosive aluminum. Statically dynamically balanced for smooth operation. Speed Controllable Motors Brs are nationally recognized locally serviced. Stard motors are single speed, speed controllable drip-proof. All motors are rated for continuous duty. Disconnect is stard with single speed drip-proof motors. Motors ship mounted as stard. AMCA Seal Assures rating of Air Sound performance. Special Coatings: Powered roof exhausters often require special coatings for protective decorative purposes. Available coatings include: Epoxy, Eisenheiss, Heresite (air-dried phenolic). Contact your Breidert representative or the factory for more information on available coatings colors. Quickship Program All RED Models many optional accessories are available on the Breidert Quickship Program. This program provides rapid delivery of stard products so that tight project deadlines can be met downtime on replacement work can be held to a minimum. All specifications are subject to change without notice unless approved in submittal by Breidert. 3

4 CONSTRUCTION FEATURES MODEL RED Motor Open drip-proof construction stard, ships assembled. Solid State Speed Control (Optional) Stainless Steel Exterior Fasteners Birdscreen Stard. Centrifugal Wheel Nonoverloading, backward inclined tapered blades for maximum efficiency. Safety Disconnect Stard Motor Isolators Reduce vibration sound. Conduit Chase Provided for ease of electrical connection from below roof. Deep Spun Inlet For optimum air sound performance. Roof Curb (Optional) Factory Run & Tested Assures dependable operation. 5-Year Fan Warranty AMCA Seal Assures rating of Sound Air performance. UL Label For electrical reliability. Typical Specifications Roof exhaust fan shall be of the centrifugal direct drive type. Unit shall be constructed of aluminum for durability appearance. Fan skirts shall have a rolled bead edge for rigidity. Units shall have a deep venturi inlet to prevent against snow rain entry into building. Fan wheels shall be of the centrifugal backward inclined type, constructed of aluminum containing a matching inlet venturi for optimum unit performance. Wheels shall be statically dynamically balanced. Motor assembly shall be isolated from unit to eliminate vibration noise transmission. Motor wheel assemblies shall be removable as a complete module without complete disassembly of the unit for service maintenance. Motors shall be mounted out of the exhaust airstream cooled by air separate from the exhaust. Motors for use with speed control shall be closely matched to the fan load provide good speed controllability without any objectionable noise. Motor shall contain thermal overload protection be listed by UL. A disconnect switch birdscreen will be included. A conduit chase shall be provided through the curb cap to the motor compartment. Fans shall bear the AMCA ratings seal for Sound Air performance. Fans shall carry the UL listing mark. Fans shall bear a permanently attached nameplate displaying model serial number of unit for future identification. Fans shall be Model RED as manufactured by Breidert Air Products, Jacksonville, Florida. BREIDERT LIMITED WARRANTY Breidert Air Products (manufacturer), 6393 Powers Avenue, Jacksonville, Florida 32217, warrants equipment of its manufacture to be free from defects in design, materials workmanship (exclusive of abrasion, corrosion or erosion) for five (5) years from the date of receipt or the date of shipment to the original purchaser or the date of notification of readiness to ship. Motor warranty is one (1) year. In order to claim the benefit of this warranty, buyer must notify manufacturer in writing of the claimed defect within ten (10) days after discovering it return this equipment or parts to the factory with transportation prepaid. In the event of on-site repair, no service technician will be dispatched until manufacturer receives your written purchase order. If any of the following conditions exist, the warranty will be null void: (1) Buyer has permitted other persons not approved or authorized by manufacturer to alter, adjust, replace or repair the equipment or any part there of. (2) Buyer has not followed instructions or other directions given in the contract documents or our maintenance manual. (3) When breakage or other loss or damage is the result of any negligence, misuse or fault on the part of any operator or other person not under our supervision or control. (4) The defect is the result of designs or drawings made, furnished or specified by others. (5) In the case of goods not manufactured but supplied by the manufacturer as part of a contract, manufacturer shall only be liable to the same extent that our supplier is to manufacturer, not to exceed any liability manufacturer would have for warranty on our own equipment. (6) Buyer has not paid in full any invoices submitted to buyer which are due for payment. (7) Unusual wear tear of the equipment. Statements relating to the product, its use or installation made prior to the execution of the agreement, are not warranties except to the extent that the contrary is expressly set forth herein. It is understood that such statements were not intended to, did not, form a part of the agreement; they were merely made in the course of negotiations of the parties. THIS WARRANTY IS IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. OUR SOLE AND EXCLUSIVE OBLIGATION UNDER THIS WARRANTY IS TO REP OR REPLACE DEFECTIVE EQUIPMENT OR PARTS OR, AT OUR OPTION, TO PAY THE REASONABLE COST OF REP OR REPLACEMENT. BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES, DAMAGES FOR LOST PROFITS OR SALES, OR DAMAGES FOR INJURIES TO PERSON OR PROPERTY) SHALL BE AVAILABLE. NOTWITHSTANDING THE ABOVE, THE TOTAL AMOUNT THAT MAY IN ANY EVENT BE PAYABLE IN SETTLEMENT OF LIABILITY, HOWEVER INCURRED, SHALL NOT EXCEED THE CONTRACT PRICE. 4

5 /DIMENSIONS I.D. Damper Roof Opening Curb Dimensional Data A B C D Average Ship Wt. Lbs /4 14-3/4 21-3/ /2 1-3/4 50 Fan performances may vary from actual current motor offerings for any given model. See price publications or software for current motor offerings RED6 Static Pressure/Sones 0 1/8 1/4 3/8 1/2 5/8 3/4 7/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8.0 Catalog Number HP Tip Speed RED6 CS+ 1/ / / RED6 CS+ 1/ / / RED6 C* 1/ RED6 CLS+ 1/ / / / RED6 CLS+ 1/ / / RED6 CLS+ 1/ / RED6 CL* 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ / / / / / / / / / / RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ / / / / / RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ RED6 S+ 1/ /8.4 Model RED RED6* 1/ (1) Model RED 6 C series has choke plate. Model RED 6 S requires speed control for listed rpm. Performance certified is for installation type A-free inlet, free outlet. Performance ratings include the effects of birdscreen in the airstream. The sound ratings shown are loudness values in fan 5' (1.5m) in a hemispherical free field calculated per AMCA Stard 301. Values shown are for Installation Type A-free inlet fan sone levels. * Base Unit-AMCA Seal for Sound Rating does not apply to units with speed control. + range capable with solid state speed control. Speed () shown is nominal. Performance is based on actual speed of test. Breidert Air Products, Div. of Soler & Palau Ventilation Group, certifies that the Models RED shown herein are licensed to bear the AMCA Seal. The ratings shown are based on test procedures performed in accordance with AMCA Publication 211 AMCA Publication 311 comply with the requirement of the AMCA Certified Ratings Program. LISTED POWER ROOF VENTILATOR UL STANDARD 705 5

6 Size I.D. Damper Roof Opening Dimensional Data Curb A B C D Average Ship Wt. Lbs. RED812/ /4 14-3/4 21-3/4 13-1/2 16-1/2 1-3/4 50 RED /4 14-3/4 21-3/4 15-3/4 16-1/2 1-3/4 50 RED /4 14-3/4 21-3/4 17-1/4 16-1/2 1-3/4 50 Fan performances may vary from actual current motor offerings for any given model. See price publications or software for current motor offerings Performance/Dimensions RED8 RED10 Models RED8 RED10 Static Pressure/Sones 0 1/8 1/4 3/8 1/2 5/8 3/4 7/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /13.8 (1) Models with S in the number require speed control. Performance certified is for installation type A-free inlet, free outlet. Performance ratings include the effects of birdscreen in the airstream. The sound ratings shown are loudness values in fan 5' (1.5m) in a hemispherical free field calculated per AMCA Stard 301. Values shown are for Installation Type A-free inlet fan sone levels. * Base Unit-AMCA Seal for Sound Rating does not apply to units with speed control. + range capable with solid state speed control. Speed () shown is nominal. Performance is based on actual speed of test. Catalog Number HP Tip Speed RED812 S+ 1/ RED812 S+ 1/ / / / / / / / / / / / / / / / / / / / / RED812 S+ 1/ RED812 * 1/ / / / / / / / RED810 S+ 1/ / / / / / / RED810 S+ 1/ RED810 S+ 1/ / / / / RED810 S+ 1/ / / / RED810 S+ 1/ RED810 S+ 1/ / /9.9 RED825 * 1/ RED1025 S+ 1/ / / / / / / / / / / RED1025 S+ 1/ RED1025 S+ 1/ / / / / / / / / RED1025 S+ 1/ / / / / / / / RED1025 S+ 1/ / / / / / / RED1025 S+ 1/ / / / / / RED1025 S+ 1/ / / / /12.1 RED1025 S+ 1/ RED1025 * 1/ RED1033 S+ 1/ RED1033 * 1/ Breidert Air Products, Div. of Soler & Palau Ventilation Group, certifies that the Models RED shown herein are licensed to bear the AMCA Seal. The ratings shown are based on test procedures performed in accordance with AMCA Publication 211 AMCA Publication 311 comply with the requirement of the AMCA Certified Ratings Program. LISTED POWER ROOF VENTILATOR UL STANDARD 705 6

7 I.D. Damper Roof Opening Curb Dimensional Data A B C D Average Ship Wt. Lbs /4 22-1/4 33-1/8 23-1/ Fan performances may vary from actual current motor offerings for any given model. See price publications or software for current motor offerings RED12 RED15 Models RED12 RED15 Static Pressure/Sones 0 1/8 1/4 3/8 1/2 5/8 3/4 7/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /12.9 (1) Models with S in the number require speed control. Performance certified is for installation type A-free inlet, free outlet. Performance ratings include the effects of birdscreen in the airstream. The sound ratings shown are loudness values in fan 5' (1.5m) in a hemispherical free field calculated per AMCA Stard 301. Values shown are for Installation Type A-free inlet fan sone levels. * Base Unit-AMCA Seal for Sound Rating does not apply to units with speed control. + range capable with solid state speed control. Speed () shown is nominal. Performance is based on actual speed of test. Catalog Number HP Tip Speed RED1216 S+ 1/ RED1216 S+ 1/ / / / / / / / / / / / / / / / / RED1216 S+ 1/ RED1216 S+ 1/ / / / / / / / / / / / / / / RED1216 S+ 1/ RED1216* 1/ / / / / / / / / / / / / RED1250 S+ 1/ RED1250 S+ 1/ / / / / / / / / / / RED1250 S+ 1/ / / / / / / / / /16.0 RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250 S+ 1/ RED1250* 1/ RED1550 S+ 1/ / / / / / / / / RED1550 S+ 1/ RED1550 S+ 1/ / / / / / / RED1550 S+ 1/ RED1550 S+ 1/ / / / / RED1550 S+ 1/ / / / RED1550 S+ 1/ / /12.6 RED1550 S+ 1/ RED1550 * 1/ Breidert Air Products, Div. of Soler & Palau Ventilation Group, certifies that the Models RED shown herein are licensed to bear the AMCA Seal. The ratings shown are based on test procedures performed in accordance with AMCA Publication 211 AMCA Publication 311 comply with the requirement of the AMCA Certified Ratings Program. LISTED POWER ROOF VENTILATOR UL STANDARD 705 Performance/Dimensions 7

8 Additional Products Breidert manufactures a complete line of gravity ventilators fans for all your ventilation requirements. MODEL DB Belt Drive Centrifugal Roof Exhaust MODEL RED Direct Drive Centrifugal Roof Exhaust MODEL SQB/SQD Belt Drive/Direct Drive Square Inline MODEL UBB/UBX/UBS Propeller Belt Direct Drive Upblast Roof Exhaust MODEL L Propeller Belt Drive Sidewall Exhaust or Supply MODEL BGH Gravity Hood Intake or Relief MODEL KSF Forward Curved Blower Belt Drive Filtered Roof Supply MODEL TXB/TXD Belt Drive/Direct Drive Centrifugal Upblast MODEL BVS Belt Drive Centrifugal Utility Set DUE TO CONTINUING RESEARCH BREIDERT RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE REPRESENTED BY: 6393 POWERS AVENUE JACKSONVILLE, FLORIDA P F Customer Service Only: