EVALUATION SUBJECT: EPA WATERSENSE SHOWERHEADS
|
|
|
- Jasmine Matthews
- 5 years ago
- Views:
Transcription
1 ICC-ES Report PMG-1298 Reissued 12/2018 This report is subject to renewal 12/2019 EVALUATION SUBJECT: EPA WATERSENSE SHOWERHEADS DIVISION: PLUMBING SECTION: PLUMBING FIXTURES INSTRUMENTATION AND CONTROL FOR PLUMBING Report Holder: HIGH SIERRA SHOWERHEADS
2 ICC-ES PMG Product Certificate PMG-1298 Effective Date: December 2018 This listing is subject to re-examination in one year. (800) (562) A Subsidiary of the International Code Council CSI: DIVISION: Plumbing Section: Plumbing Fixtures Section: Instrumentation and Control for Plumbing Product Certification System: The ICC-ES product certification system includes samples taken from the market or supplier s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier s quality system. Product: EPA WaterSense Showerheads Listee: High Sierra Showerheads P.O. Box 732 Coarsegold, CA Compliance with the following standards: Identification: Installation: EPA WaterSense Specification for Showerheads (Version 1.1, July 26, 2018 edition) The product shall bear the applicable marking requirements of the latest version of ASME A /CSA B In addition the product and the product packaging shall be marked with maximum flow rate in gpm and L/min as specified by the manufacturer. Marking shall be in gpm and L/min in two or three digit resolution (e.g., 2.0 gpm [7.6 L/min]). The product packaging shall also be marked with the minimum flow rate value in gpm and L/min at 45 psi. The product or packaging shall bear the EPA WaterSense logo. Showerheads are to be installed in accordance with the manufacturer's instructions and the applicable codes. Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright 2018 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 8
3 PMG-1298 Most Widely Accepted and Trusted Page 2 of 8 Models: Brand Name: High Sierra Showerheads Certification Date Model Number Maximum Rated Flow Rate Minimum Rated Flow Rate at 45 psi 12/01/2014 FCS-100-CH gpm 1.8 gpm 12/01/2014 FCS-200-CH gpm 1.8 gpm 12/01/2014 FCS-100-N gpm 1.8 gpm 12/01/2014 FCS-200-N gpm 1.8 gpm 12/01/2014 TFCS-100-CH gpm 1.8 gpm 12/01/2014 TFCS-200-CH gpm 1.8 gpm 12/01/2014 TFCS-100-N gpm 1.8 gpm 12/01/2014 TFCS-200-N gpm 12/01/2014 HFCS-100-CH gpm 1.8 gpm 1.8 gpm 12/01/2014 HFCS-200-CH gpm 1.8 gpm 12/01/2014 HHFCS-100-CH gpm 1.8 gpm 12/01/2014 HHFCS-200-CH gpm 1.8 gpm 12/01/2014 HFCS-100-N gpm 1.8 gpm 12/01/2014 HFCS-200-N gpm 1.8 gpm 12/01/2014 HHFCS-100-N gpm 1.8 gpm 12/01/2014 HHFCS-200-N gpm 1.8 gpm 12/01/2014 HFCS-200-CHCM gpm 1.8 gpm 12/01/2014 HFCS-200-NCM gpm 1.8 gpm 12/01/2014 HFCS-100-NOD gpm 1.8 gpm 12/01/2014 FCS-100-VRM gpm 1.8 gpm 12/01/2014 HFCS-100-VRM-N gpm 1.8 gpm 12/01/2014 FCS-100-VRM gpm 1.8 gpm 12/01/2014 FCS-100-VRF gpm 1.8 gpm 12/01/2014 FCS-100-VRM gpm 1.8 gpm 12/01/2014 FCS-100-VRM141P 1.8 gpm 1.8 gpm 12/01/2014 FCS-100-VRM1214MC gpm 1.8 gpm 12/01/2014 FCS-100-VRM gpm 1.8 gpm 12/01/2014 FCS-100-VRF-CH gpm 1.8 gpm 12/01/2014 XFCS-100-CH gpm 1.8 gpm 12/01/2014 XFCS-200-CH gpm 1.8 gpm 12/01/2014 XFCS-100-N gpm 1.8 gpm 12/01/2014 XFCS-200-N gpm 1.8 gpm 12/01/2014 FCS-200-CHCM gpm 1.8 gpm 12/01/2014 FCS-200-NCM gpm 1.8 gpm 12/01/2014 FCS-100-NOD gpm 1.8 gpm 12/01/2014 FCS-100-VRF-N gpm 1.8 gpm 8/1/2015 FCS-100-CH gpm 1.5 gpm 8/1/2015 FCS-100-N gpm 1.5 gpm 8/1/2015 FCS-200-CH gpm 1.5 gpm 8/1/2015 FCS-200-N gpm 1.5 gpm 8/1/2015 TFCS-100-CH gpm 1.5 gpm 8/1/2015 TFCS-100-N gpm 1.5 gpm 8/1/2015 TFCS-200-CH gpm 1.5 gpm 8/1/2015 TFCS-200-N gpm 1.5 gpm 8/1/2015 HFCS-100-CH gpm 1.5 gpm 8/1/2015 HFCS-100-N gpm 1.5 gpm 8/1/2015 HFCS-200-CH gpm 1.5 gpm 8/1/2015 HFCS-200-N gpm 1.5 gpm 8/1/2015 HHFCS-100-CH gpm 1.5 gpm 8/1/2015 HHFCS-100-N gpm 1.5 gpm 8/1/2015 HHFCS-200-CH gpm 1.5 gpm 8/1/2015 HHFCS-200-N gpm 1.5 gpm 8/1/2015 HFCS-100-NOD gpm 1.5 gpm 8/1/2015 HHFCS-100-NOD gpm 1.5 gpm 8/1/2015 HFCS-100-VRM-N gpm 1.5 gpm 8/1/2015 HHFCS-100-VRM gpm 1.5 gpm
4 PMG-1298 Most Widely Accepted and Trusted Page 3 of 8 8/1/2015 FCS-100-VRM gpm 1.5 gpm 8/1/2015 FCS-100-VRM gpm 1.5 gpm 8/1/2015 FCS-100-VRF gpm 1.5 gpm 8/1/2015 FCS-100-VRM gpm 1.5 gpm 8/1/2015 FCS-100-VRM141P gpm 1.5 gpm 8/1/2015 FCS-100-VRM1214MC gpm 1.5 gpm 8/1/2015 FCS-100-VRM gpm 1.5 gpm 8/1/2015 FCS-100-VRF-CH gpm 1.5 gpm 8/1/2015 XFCS-100-CH gpm 1.5 gpm 8/1/2015 XFCS-100-N gpm 1.5 gpm 8/1/2015 FCS-100-NOD gpm 1.5 gpm 8/1/2015 FCS-200-CHCM gpm 1.5 gpm 8/1/2015 FCS-200-NCM gpm 1.5 gpm 8/1/2015 HFCS-200-CHCM gpm 1.5 gpm 8/1/2015 HHFCS-200-CHCM gpm 1.5 gpm 8/1/2015 HFCS-200-NCM gpm 1.5 gpm 8/1/2015 HHFCS-200-NCM gpm 1.5 gpm 8/1/2015 FCS-100-N-VRF gpm 1.5 gpm 8/1/2015 HFCS-100-VRM-N gpm 1.5 gpm 8/1/2015 HHFCS-100-VRM-N gpm 1.5 gpm 8/1/2015 FCS-100-VRM12518NS gpm 1.5 gpm 8/1/2015 FCS-100-VRM gpm 1.5 gpm 8/1/2015 FCS-100-VRF1214NS gpm 1.5 gpm 5/1/2016 FCS-100-ORB gpm 1.5 gpm 5/1/2016 FCS-100-ORB gpm 1.8 gpm 5/1/2016 FCS-200-ORB gpm 1.5 gpm 5/1/2016 FCS-200-ORB gpm 1.8 gpm 5/1/2016 FCS-100-PB gpm 1.5 gpm 5/1/2016 FCS-100-PB gpm 1.8 gpm 5/1/2016 FCS-200-PB gpm 1.5 gpm 5/1/2016 FCS-200-PB gpm 1.8 gpm 5/1/2016 HFCS-100-ORB gpm 1.5 gpm 5/1/2016 HFCS-100-ORB gpm 1.8 gpm 5/1/2016 HFCS-200-ORB gpm 1.5 gpm 5/1/2016 HFCS-200-ORB gpm 1.8 gpm 5/1/2016 HHFCS-100-ORB gpm 1.5 gpm 5/1/2016 HHFCS-100-ORB gpm 1.8 gpm 5/1/2016 HHFCS-200-ORB gpm 1.5 gpm 5/1/2016 HHFCS-200-ORB gpm 1.8 gpm 5/1/2016 HHHFCS-100-ORB gpm 1.5 gpm 5/1/2016 HHHFCS-100-ORB gpm 1.8 gpm 5/1/2016 HHHFCS-200-ORB gpm 1.5 gpm 5/1/2016 HHHFCS-200-ORB gpm 1.8 gpm 5/1/2016 G-HFCS-100-ORB gpm 1.5 gpm 5/1/2016 G-HFCS-100-ORB gpm 1.8 gpm 5/1/2016 G-HFCS-200-ORB gpm 1.5 gpm 5/1/2016 G-HFCS-200-ORB gpm 1.8 gpm 5/1/2016 G-HHFCS-100-ORB gpm 1.5 gpm 5/1/2016 G-HHFCS-100-ORB gpm 1.8 gpm 5/1/2016 G-HHFCS-200-ORB gpm 1.5 gpm 5/1/2016 G-HHFCS-200-ORB gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-ORB gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-ORB gpm 1.8 gpm 5/1/2016 G-HHHFCS-200-ORB gpm 1.5 gpm 5/1/2016 G-HHHFCS-200-ORB gpm 1.8 gpm 5/1/2016 HHHFCS-100-CH gpm 1.5 gpm 5/1/2016 HHHFCS-100-CH gpm 1.8 gpm 5/1/2016 HHHFCS-200-CH gpm 1.5 gpm 5/1/2016 HHHFCS-200-CH gpm 1.8 gpm 5/1/2016 HHHFCS-100-N gpm 1.5 gpm
5 PMG-1298 Most Widely Accepted and Trusted Page 4 of 8 5/1/2016 HHHFCS-100-N gpm 1.8 gpm 5/1/2016 HHHFCS-200-N gpm 1.5 gpm 5/1/2016 HHHFCS-200-N gpm 1.8 gpm 5/1/2016 G-HFCS-100-CH gpm 1.5 gpm 5/1/2016 G-HFCS-100-CH gpm 1.8 gpm 5/1/2016 G-HFCS-200-CH gpm 1.5 gpm 5/1/2016 G-HFCS-200-CH gpm 1.8 gpm 5/1/2016 G-HFCS-100-N gpm 1.5 gpm 5/1/2016 G-HFCS-100-N gpm 1.8 gpm 5/1/2016 G-HFCS-200-N gpm 1.5 gpm 5/1/2016 G-HFCS-200-N gpm 1.8 gpm 5/1/2016 G-HHFCS-100-CH gpm 1.5 gpm 5/1/2016 G-HHFCS-100-CH gpm 1.8 gpm 5/1/2016 G-HHFCS-200-CH gpm 1.5 gpm 5/1/2016 G-HHFCS-200-CH gpm 1.8 gpm 5/1/2016 G-HHFCS-100-N gpm 1.5 gpm 5/1/2016 G-HHFCS-100-N gpm 1.8 gpm 5/1/2016 G-HHFCS-200-N gpm 1.5 gpm 5/1/2016 G-HHFCS-200-N gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-CH gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-CH gpm 1.8 gpm 5/1/2016 G-HHHFCS-200-CH gpm 1.5 gpm 5/1/2016 G-HHHFCS-200-CH gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-N gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-N gpm 1.8 gpm 5/1/2016 G-HHHFCS-200-N gpm 1.5 gpm 5/1/2016 G-HHHFCS-200-N gpm 1.8 gpm 5/1/2016 TFCS-100-ORB gpm 1.5 gpm 5/1/2016 TFCS-100-ORB gpm 1.8 gpm 5/1/2016 TFCS-200-ORB gpm 1.5 gpm 5/1/2016 TFCS-200-ORB gpm 1.8 gpm 5/1/2016 TFCS-100-PB gpm 1.5 gpm 5/1/2016 TFCS-100-PB gpm 1.8 gpm 5/1/2016 TFCS-200-PB gpm 1.5 gpm 5/1/2016 TFCS-200-PB gpm 1.8 gpm 5/1/2016 XFCS-200-CH gpm 1.5 gpm 5/1/2016 XFCS-200-N gpm 1.5 gpm 5/1/2016 RFCS-200-CH gpm 1.5 gpm 5/1/2016 RFCS-200-CH gpm 1.8 gpm 5/1/2016 RFCS-200-N gpm 1.5 gpm 5/1/2016 RFCS-200-N gpm 1.8 gpm 5/1/2016 RXFCS-200-CH gpm 1.5 gpm 5/1/2016 RXFCS-200-CH gpm 1.8 gpm 5/1/2016 RXFCS-200-N gpm 1.5 gpm 5/1/2016 RXFCS-200-N gpm 1.8 gpm 5/1/2016 G-HFCS-100-VRM-CH gpm 1.5 gpm 5/1/2016 G-HFCS-100-VRM-CH gpm 1.8 gpm 5/1/2016 G-HHFCS-100-VRM-CH gpm 1.5 gpm 5/1/2016 G-HHFCS-100-VRM-CH gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-VRM-CH gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-VRM-CH gpm 1.8 gpm 5/1/2016 HHFCS-100-VRM-N gpm 1.8 gpm 5/1/2016 G-HFCS-100-VRM-N gpm 1.5 gpm 5/1/2016 G-HFCS-100-VRM-N gpm 1.8 gpm 5/1/2016 G-HHFCS-100-VRM-N gpm 1.5 gpm 5/1/2016 G-HHFCS-100-VRM-N gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-VRM-N gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-VRM-N gpm 1.8 gpm 5/1/2016 FCS-100-VRM141P gpm 1.8 gpm 5/1/2016 FCS-100-VRM12518NS gpm 1.8 gpm
6 PMG-1298 Most Widely Accepted and Trusted Page 5 of 8 5/1/2016 FCS-100-VRM gpm 1.8 gpm 5/1/2016 FCS-100-VRF1214NS gpm 1.8 gpm 5/1/2016 HFCS-100-ACH gpm 1.5 gpm 5/1/2016 HFCS-100-ACH gpm 1.8 gpm 5/1/2016 HFCS-200-ACH gpm 1.5 gpm 5/1/2016 HFCS-200-ACH gpm 1.8 gpm 5/1/2016 HHFCS-100-ACH gpm 1.5 gpm 5/1/2016 HHFCS-100-ACH gpm 1.8 gpm 5/1/2016 HHFCS-200-ACH gpm 1.5 gpm 5/1/2016 HHFCS-200-ACH gpm 1.8 gpm 5/1/2016 HHHFCS-100-ACH gpm 1.5 gpm 5/1/2016 HHHFCS-100-ACH gpm 1.8 gpm 5/1/2016 HHHFCS-200-ACH gpm 1.5 gpm 5/1/2016 HHHFCS-200-ACH gpm 1.8 gpm 5/1/2016 G-HFCS-100-ACH gpm 1.5 gpm 5/1/2016 G-HFCS-100-ACH gpm 1.8 gpm 5/1/2016 G-HFCS-200-ACH gpm 1.5 gpm 5/1/2016 G-HFCS-200-ACH gpm 1.8 gpm 5/1/2016 G-HHFCS-100-ACH gpm 1.5 gpm 5/1/2016 G-HHFCS-100-ACH gpm 1.8 gpm 5/1/2016 G-HHFCS-200-ACH gpm 1.5 gpm 5/1/2016 G-HHFCS-200-ACH gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-ACH gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-ACH gpm 1.8 gpm 5/1/2016 G-HHHFCS-200-ACH gpm 1.5 gpm 5/1/2016 G-HHHFCS-200-ACH gpm 1.8 gpm 5/1/2016 FCS-100-SYMCH gpm 1.5 gpm 5/1/2016 FCS-100-SYMCH gpm 1.8 gpm 5/1/2016 FCS-200-SYMCH gpm 1.5 gpm 5/1/2016 FCS-200-SYMCH gpm 1.8 gpm 5/1/2016 XFCS-100-ORB gpm 1.5 gpm 5/1/2016 XFCS-100-ORB gpm 1.8 gpm 5/1/2016 XFCS-200-ORB gpm 1.5 gpm 5/1/2016 XFCS-200-ORB gpm 1.8 gpm 5/1/2016 XFCS-100-PB gpm 1.5 gpm 5/1/2016 XFCS-100-PB gpm 1.8 gpm 5/1/2016 XFCS-200-PB gpm 1.5 gpm 5/1/2016 XFCS-200-PB gpm 1.8 gpm 5/1/2016 RFCS-200-ORB gpm 1.5 gpm 5/1/2016 RFCS-200-ORB gpm 1.8 gpm 5/1/2016 RFCS-200-PB gpm 1.5 gpm 5/1/2016 RFCS-200-PB gpm 1.8 gpm 5/1/2016 RXFCS-200-ORB gpm 1.5 gpm 5/1/2016 RXFCS-200-ORB gpm 1.8 gpm 5/1/2016 RXFCS-200-PB gpm 1.5 gpm 5/1/2016 RXFCS-200-PB gpm 1.8 gpm 5/1/2016 HFCS-100-PB gpm 1.5 gpm 5/1/2016 HFCS-100-PB gpm 1.8 gpm 5/1/2016 HFCS-200-PB gpm 1.5 gpm 5/1/2016 HFCS-200-PB gpm 1.8 gpm 5/1/2016 HHFCS-100-PB gpm 1.5 gpm 5/1/2016 HHFCS-100-PB gpm 1.8 gpm 5/1/2016 HHFCS-200-PB gpm 1.5 gpm 5/1/2016 HHFCS-200-PB gpm 1.8 gpm 5/1/2016 HHHFCS-100-PB gpm 1.5 gpm 5/1/2016 HHHFCS-100-PB gpm 1.8 gpm 5/1/2016 HHHFCS-200-PB gpm 1.5 gpm 5/1/2016 HHHFCS-200-PB gpm 1.8 gpm 5/1/2016 G-HFCS-100-PB gpm 1.5 gpm 5/1/2016 G-HFCS-100-PB gpm 1.8 gpm
7 PMG-1298 Most Widely Accepted and Trusted Page 6 of 8 5/1/2016 G-HFCS-200-PB gpm 1.5 gpm 5/1/2016 G-HFCS-200-PB gpm 1.8 gpm 5/1/2016 G-HHFCS-100-PB gpm 1.5 gpm 5/1/2016 G-HHFCS-100-PB gpm 1.8 gpm 5/1/2016 G-HHFCS-200-PB gpm 1.5 gpm 5/1/2016 G-HHFCS-200-PB gpm 1.8 gpm 5/1/2016 G-HHHFCS-100-PB gpm 1.5 gpm 5/1/2016 G-HHHFCS-100-PB gpm 1.8 gpm 5/1/2016 G-HHHFCS-200-PB gpm 1.5 gpm 5/1/2016 G-HHHFCS-200-PB gpm 1.8 gpm 5/1/2016 FCS-100-VRF3818NS gpm 1.5 gpm 5/1/2016 FCS-100-VRF3818NS gpm 1.8 gpm 5/1/2016 FCS-100-VRF gpm 1.5 gpm 5/1/2016 FCS-100-VRF gpm 1.8 gpm 12/1/2018 FCS COMP gpm 1.5 gpm 12/1/2018 FCS COMP gpm 1.8 gpm 12/1/2018 FCS-100-CH621CP gpm 1.5 gpm 12/1/2018 FCS-100-CH621CP gpm 1.8 gpm 12/1/2018 FCS-100-VRMCHATHNS gpm 1.5 gpm 12/1/2018 FCS-100-VRMCHATHNS gpm 1.8 gpm 12/1/2018 FCS-100-VRMS gpm 1.5 gpm 12/1/2018 FCS-100-VRMS gpm 1.8 gpm 12/1/2018 FCS-100-VRMZURNNS gpm 1.5 gpm 12/1/2018 FCS-100-VRMZURNNS gpm 1.8 gpm 12/1/2018 G-RHFCS-200-CH gpm 1.5 gpm 12/1/2018 G-RHFCS-200-CH gpm 1.8 gpm 12/1/2018 G-RHFCS-200-N gpm 1.5 gpm 12/1/2018 G-RHFCS-200-N gpm 1.8 gpm 12/1/2018 G-RHFCS-200-ORB gpm 1.5 gpm 12/1/2018 G-RHFCS-200-ORB gpm 1.8 gpm 12/1/2018 G-RHHFCS-200-CH gpm 1.5 gpm 12/1/2018 G-RHHFCS-200-CH gpm 1.8 gpm 12/1/2018 G-RHHFCS-200-N gpm 1.5 gpm 12/1/2018 G-RHHFCS-200-N gpm 1.8 gpm 12/1/2018 G-RHHFCS-200-ORB gpm 1.5 gpm 12/1/2018 G-RHHFCS-200-ORB gpm 1.8 gpm 12/1/2018 G-RHHHFCS-200-CH gpm 1.5 gpm 12/1/2018 G-RHHHFCS-200-CH gpm 1.8 gpm 12/1/2018 G-RHHHFCS-200-N gpm 1.5 gpm 12/1/2018 G-RHHHFCS-200-N gpm 1.8 gpm 12/1/2018 G-RHHHFCS-200-ORB gpm 1.5 gpm 12/1/2018 G-RHHHFCS-200-ORB gpm 1.8 gpm 12/1/2018 HDFCS-100-CH gpm 1.5 gpm 12/1/2018 HDFCS-100-CH gpm 1.8 gpm 12/1/2018 HDFCS-100-N gpm 1.5 gpm 12/1/2018 HDFCS-100-N gpm 1.8 gpm 12/1/2018 HDFCS-100-ORB gpm 1.5 gpm 12/1/2018 HDFCS-100-ORB gpm 1.8 gpm 12/1/2018 HDFCS-100-PB gpm 1.5 gpm 12/1/2018 HDFCS-100-PB gpm 1.8 gpm 12/1/2018 HDFCS-200-CH gpm 1.5 gpm 12/1/2018 HDFCS-200-CH gpm 1.8 gpm 12/1/2018 HDFCS-200-N gpm 1.5 gpm 12/1/2018 HDFCS-200-N gpm 1.8 gpm 12/1/2018 HDFCS-200-ORB gpm 1.5 gpm 12/1/2018 HDFCS-200-ORB gpm 1.8 gpm 12/1/2018 HDFCS-200-PB gpm 1.5 gpm 12/1/2018 HDFCS-200-PB gpm 1.8 gpm 12/1/2018 HFCS-100-VRM-CH gpm 1.5 gpm 12/1/2018 HFCS-100-VRM-CH gpm 1.8 gpm
8 PMG-1298 Most Widely Accepted and Trusted Page 7 of 8 12/1/2018 HHFCS-100-VRM-CH gpm 1.5 gpm 12/1/2018 HHFCS-100-VRM-CH gpm 1.8 gpm 12/1/2018 RHFCS-200-CH gpm 1.5 gpm 12/1/2018 RHFCS-200-CH gpm 1.8 gpm 12/1/2018 RHFCS-200-N gpm 1.5 gpm 12/1/2018 RHFCS-200-N gpm 1.8 gpm 12/1/2018 RHFCS-200-ORB gpm 1.5 gpm 12/1/2018 RHFCS-200-ORB gpm 1.8 gpm 12/1/2018 RHHFCS-200-CH gpm 1.5 gpm 12/1/2018 RHHFCS-200-CH gpm 1.8 gpm 12/1/2018 RHHFCS-200-N gpm 1.5 gpm 12/1/2018 RHHFCS-200-N gpm 1.8 gpm 12/1/2018 RHHFCS-200-ORB gpm 1.5 gpm 12/1/2018 RHHFCS-200-ORB gpm 1.8 gpm 12/1/2018 RHHHFCS-200-CH gpm 1.5 gpm 12/1/2018 RHHHFCS-200-CH gpm 1.5 gpm 12/1/2018 RHHHFCS-200-CH gpm 1.8 gpm 12/1/2018 RHHHFCS-200-CH gpm 1.8 gpm 12/1/2018 RHHHFCS-200-N gpm 1.5 gpm 12/1/2018 RHHHFCS-200-N gpm 1.8 gpm 12/1/2018 TFCS-100-CHBS gpm 1.5 gpm 12/1/2018 TFCS-100-CHBS gpm 1.8 gpm 12/1/2018 TFCS-100-CHM gpm 1.5 gpm 12/1/2018 TFCS-100-CHM gpm 1.8 gpm 12/1/2018 TFCS-100-CHWT gpm 1.5 gpm 12/1/2018 TFCS-100-CHWT gpm 1.8 gpm 12/1/2018 TFCS-100-NBS gpm 1.5 gpm 12/1/2018 TFCS-100-NBS gpm 1.8 gpm 12/1/2018 TFCS-100-NM gpm 1.5 gpm 12/1/2018 TFCS-100-NM gpm 1.8 gpm 12/1/2018 TFCS-100-NWT gpm 1.5 gpm 12/1/2018 TFCS-100-NWT gpm 1.8 gpm 12/1/2018 TFCS-100-ORBBS gpm 1.5 gpm 12/1/2018 TFCS-100-ORBBS gpm 1.8 gpm 12/1/2018 TFCS-100-ORBM gpm 1.5 gpm 12/1/2018 TFCS-100-ORBM gpm 1.8 gpm 12/1/2018 TFCS-100-ORBWT gpm 1.5 gpm 12/1/2018 TFCS-100-ORBWT gpm 1.8 gpm 12/1/2018 TFCS-100-PBBS gpm 1.5 gpm 12/1/2018 TFCS-100-PBBS gpm 1.8 gpm 12/1/2018 TFCS-100-PBM gpm 1.5 gpm 12/1/2018 TFCS-100-PBM gpm 1.8 gpm 12/1/2018 TFCS-100-PBWT gpm 1.5 gpm 12/1/2018 TFCS-100-PBWT gpm 1.8 gpm 12/1/2018 TFCS-200-CHBS gpm 1.5 gpm 12/1/2018 TFCS-200-CHBS gpm 1.8 gpm 12/1/2018 TFCS-200-CHM gpm 1.5 gpm 12/1/2018 TFCS-200-CHM gpm 1.8 gpm 12/1/2018 TFCS-200-CHWT gpm 1.5 gpm 12/1/2018 TFCS-200-CHWT gpm 1.8 gpm 12/1/2018 TFCS-200-NBS gpm 1.5 gpm 12/1/2018 TFCS-200-NBS gpm 1.8 gpm 12/1/2018 TFCS-200-NM gpm 1.5 gpm 12/1/2018 TFCS-200-NM gpm 1.8 gpm 12/1/2018 TFCS-200-NWT gpm 1.5 gpm 12/1/2018 TFCS-200-NWT gpm 1.8 gpm 12/1/2018 TFCS-200-ORBBS gpm 1.5 gpm 12/1/2018 TFCS-200-ORBBS gpm 1.8 gpm 12/1/2018 TFCS-200-ORBM gpm 1.5 gpm 12/1/2018 TFCS-200-ORBM gpm 1.8 gpm
9 PMG-1298 Most Widely Accepted and Trusted Page 8 of 8 12/1/2018 TFCS-200-ORBWT gpm 1.5 gpm 12/1/2018 TFCS-200-ORBWT gpm 1.8 gpm 12/1/2018 TFCS-200-PBBS gpm 1.5 gpm 12/1/2018 TFCS-200-PBBS gpm 1.8 gpm 12/1/2018 TFCS-200-PBM gpm 1.5 gpm 12/1/2018 TFCS-200-PBM gpm 1.8 gpm 12/1/2018 TFCS-200-PBWT gpm 1.5 gpm 12/1/2018 TFCS-200-PBWT gpm 1.8 gpm 12/1/2018 XFCS-100-CHBS gpm 1.5 gpm 12/1/2018 XFCS-100-CHBS gpm 1.8 gpm 12/1/2018 XFCS-100-CHM gpm 1.5 gpm 12/1/2018 XFCS-100-CHM gpm 1.8 gpm 12/1/2018 XFCS-100-CHWT gpm 1.5 gpm 12/1/2018 XFCS-100-CHWT gpm 1.8 gpm 12/1/2018 XFCS-100-NBS gpm 1.5 gpm 12/1/2018 XFCS-100-NBS gpm 1.8 gpm 12/1/2018 XFCS-100-NM gpm 1.5 gpm 12/1/2018 XFCS-100-NM gpm 1.8 gpm 12/1/2018 XFCS-100-NWT gpm 1.5 gpm 12/1/2018 XFCS-100-NWT gpm 1.8 gpm 12/1/2018 XFCS-200-CHBS gpm 1.5 gpm 12/1/2018 XFCS-200-CHBS gpm 1.8 gpm 12/1/2018 XFCS-200-CHM gpm 1.5 gpm 12/1/2018 XFCS-200-CHM gpm 1.8 gpm 12/1/2018 XFCS-200-CHWT gpm 1.5 gpm 12/1/2018 XFCS-200-CHWT gpm 1.8 gpm 12/1/2018 XFCS-200-NBS gpm 1.5 gpm 12/1/2018 XFCS-200-NBS gpm 1.8 gpm 12/1/2018 XFCS-200-NM gpm 1.5 gpm 12/1/2018 XFCS-200-NM gpm 1.8 gpm 12/1/2018 XFCS-200-NWT gpm 1.5 gpm 12/1/2018 XFCS-200-NWT gpm 1.8 gpm Conditions of listing: 1. The High Sierra Showerhead models recognized in this listing must be installed in accordance with the manufacturer s published installation instructions and the applicable codes. 2. The High Sierra Showerhead models recognized in this listing are manufactured by High Sierra Showerheads in Coarsegold, California under a quality control program with annual surveillance inspections by ICC-ES.
EVALUATION SUBJECT: EPA WATERSENSE HUNTER INDUSTRIES WEATHER-BASED IRRIGATION CONTROLLERS
ICC-ES Report PMG-1134 Reissued 11/21/2017 This report is subject to renewal 07/2018 EVALUATION SUBJECT: EPA WATERSE HUNTER INDUSTRIES WEATHER-BASED IRRIGATION CONTROLLERS DIVISION: 22 00 00 PLUMBING SECTION:
EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION
ICC-ES Report PMG-1440 Issued 09/2017 This report is subject to renewal 09/2018 EVALUATION SUBJECT: >B< MAXIPRO PRESS FITTINGS FOR AC AND REFRIGERATION APPLICATION DIVISION: 23 00 00 HEATING, VENTILATING
EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS
ICC-ES Report PMG-1220 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 13 16 SANITARY WASTE AND VENT
EVALUATION SUBJECT: GASTITE FLASHSHIELD METALLICALLY SHIELDED CORRUGATED STAINLESS STEEL TUBING
ICC-ES Report PMG-1155 Reissued 01/2018 This report is subject to renewal 01/2019 EVALUATION SUBJECT: GASTITE FLASHSHIELD METALLICALLY SHIELDED CORRUGATED STAINLESS STEEL TUBING DIVISION: 23 00 00 HEATING,
EVALUATION SUBJECT: CERAMIC PLUMBING FIXTURES
ICC-ES Report PMG-1454 Issued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: CERAMIC PLUMBING FIXTURES DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION
EVALUATION SUBJECT: KITCHEN AND VANITY CABINETS
ICC-ES Report PMG-1441 Issued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: KITCHEN AND VANITY CABINETS DIVISION: 12 00 00 FURNISHINGS SECTION: 12 32 00 MANUFACTURED WOOD CASEWORK
DIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: VELUX AMERICA LLC POST OFFICE 5001 GREENWOOD, SOUTH CAROLINA 29648
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-4108 Issued 12/2017 This report is subject to renewal 12/2018. DIVISION: 08 00 00
DIVISION: METALS SECTION: COLD-FORMED METAL FRAMING REPORT HOLDER: WARE INDUSTRIES D/B/A MARINO\WARE
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3578 Reissued 0/206 This report is subject to renewal 0/208. DIVISION: 05 00 00 METALS SECTION:
LEGACY REPORT. (800) (562) A Subsidiary of the International Code Council
ICC-ES Legacy Report ER- Reissued May 0 www.icc-es.org (00) - () -0 A Subsidiary of the International Code Council Legacy report on the Uniform Building Code DIVISION: 0 DOORS AND WINDOWS Section: 0 Unit
DIVISION: METALS SECTION: STEEL DECKING SECTION: STEEL FLOOR DECKING SECTION: STEEL ROOF DECKING REPORT HOLDER:
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-1735 Reissued 04/2015 This report is subject to renewal 03/2016 DIVISION: 05 00 00 METALS SECTION:
ICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-2542 Reissued October 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
Trusted ICC ES. Conformity! Look. Evaluation. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 3445 Reissued 10/2016 This report is subject to renewal 10/2018. DIVISION: 06 00
DIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: NATURAL LIGHT ENERGY SYSTEMS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3681 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 08 00
Effective Date: June Rev. 3/26/2018- Void After: June Product: Plumbing Fixture Fittings File No. 4617
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
DIVISION: METALS SECTION: METAL FASTENINGS SECTION: STEEL DECKING REPORT HOLDER: ITW BUILDEX
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3270 Reissued 12/2017 This report is subject to renewal 12/2019. DIVISION: 05 00
Report Issued: October 19, 2014 Project No.: 23942
Report Number: 1052-14017 Report Issued: October 19, 2014 Project No.: 23942 Client: Showerstart LLC 15354 North 83 rd Way Suite 102 Scottsdale, AZ 85260 Contact: Mr. Jason Swanson Source of Samples: The
REPORT HOLDER: CLARKDIETRICH BUILDING SYSTEMS 9050 CENTRE POINTE DRIVE, SUITE 400 WEST CHESTER, OHIO EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1464 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
LEGACY REPORT ER ICC Evaluation Service, Inc. Reissued May 1, Legacy report on the 1997 Uniform Building Code
LEGACY REPORT ER- Reissued May, 0 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 0 Workman Mill Road, Whittier, California 00 # () -0 Regional Office # 00 Montclair Road, Suite
ESR ICC Evaluation Service, Inc. Issued September 1, 2007 This report is subject to re-examination in one year.
ESR-2542 Issued September 1, 2007 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
DIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: CONSOLIDATED SYSTEMS, INC. (CSi )
0 ICC-ES Report ICC-ES (800) 423-6587 (562) 699-0543 www.icc-es.org 000 Most Widely Accepted and Trusted ESR-2839 Reissued 05/2015 This report is subject to renewal 05/2016. DIVISION: 05 00 00 METALS SECTION:
Effective Date: May 2018 Void After: May Product: Flexible Water Connectors File No. 5747
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
ESR ICC Evaluation Service, Inc. Issued December 1, 2006 This report is subject to re-examination in one year.
ESR-2253 Issued December 1, 2006 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
DIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: 2100 REXFORD ROAD CHARLOTTE, NORTH CAROLINA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 3 658 (56) 699 053 www.icc es.org ESR 1 Reissued 1/01 This report is subject to renewal 1/0. DIVISION: 05 00 00 METALS SECTION:
REPORT HOLDER: JAMES HARDIE BUILDING PRODUCTS INC ELM AVENUE FONTANA, CALIFORNIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 6 0543 www.icc es.org ESR 220 Reissued 03/ This report is subject to renewal 03/. DIVISION: 06 00 00 WOOD, PLASTICS
State of California AIR RESOURCES BOARD. EXECUTIVE ORDER D Relating to Exemptions Under Section of the Vehicle Code
(PAGE 1 OP 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 315 2. Relating to Exemptions Under Section 27156 of the Vehicle Code AMERICAN GAS EQUIPMENT, INC. TESCOM HIGH PRESSURE NATURAL GAS
Effective Date: not available -Rev. 10/4/2012- Void After: Product: Lead Free Plumbing Products File No. 6371
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
California Lead Plumbing Law Devices and Components
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: May Rev. 1/9/2018- Void After: May Product: Lead Free Plumbing Products File No. 6905
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Underground Storage Tank Certification Examinations. Presentation to ASTSWMO November 27, 2007 UST SYSTEM OPERATOR CERTIFICATION
INTERNATIONAL CODE COUNCIL Underground Storage Tank Certification Examinations Presentation to ASTSWMO November 27, 2007 UST SYSTEM OPERATOR CERTIFICATION Doug Hatch Test Developer, Program Manager International
Structurlam Mass Timber Corporation Revised October 11, 2018
Structurlam CrossLam PR-L314C Structurlam Mass Timber Corporation Revised October 11, 2018 Products: Structurlam CrossLam Cross-Laminated Timber Structurlam Mass Timber Corporation 2176 Government Street
Effective Date: March 2018 Void After: March 2019
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Effective Date: January 2017 Void After: January Product: ABS-DWV Pipe and Fittings File No. 1909
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
Hops Fixture/ Flow Rate Schedule. Fixture Model# Performan #of Total Toilets All Toilets Kelston K Average 1.28
Hops Fixture/ Flow Rate Schedule Fixture Model# Performan #of Total Toilets All Toilets Kelston K 11453 1.28 3 3.84 Average 1.28 Lav Faucet Master Bath and Powder Kingsley 6102 1.5 3 4.5 Basement Bath
Making every drop count.
Making every drop count. Smart water delivery solutions for sustainable design. Most building and design professionals believe sustainable design is the right thing to do. Likewise, a majority specify
National Evaluation Service, Inc.
National Evaluation Service, Inc. 5203 Leesburg Pike, Suite 600, Falls Church, Virginia 22041-3401 Phone: 703/931-2187 www.nateval.org Fax: 703/931-6505 NATIONAL EVALUATION REPORT Report No. NER-478 Re-Issued
ESR-1414 Reissued October 1, 2011 This report is subject to renewal in one year.
ICC-ES Evaluation Report www.icc-es.org (00) 23-657 (562) 699-053 ESR-11 Reissued October 1, 2011 This report is subject to renewal in one year. A Subsidiary of the International Code Council DIVISION:
Renewable Net Metering Program Appendix ESD APX 001 1
CITY OF ST.GEORGE Energy Services Department (SGESD) Renewable Net Metering Program Appendix Document No. Effective Date 10/15/2005 Revision No. 1.0 Review Date 02/18/2016 Review Cycle Annually Creation
State of California AIR RESOURCES BOARQ. EXECUTIVE ORDER D Relating to Exemptions Under Section of the Vehicle Code
{Page 1 of 2) State of California AIR RESOURCES BOARQ EXECUTIVE ORDER D 171 5. Relating to Exemptions Under Section 27156 of the Vehicle Code ADVANCED TURBO SYSTEMS, INC. TURBO CHARGER KIT MODEL NO. ATS
SFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 *
SFI SPECIFICATION 18.1 EFFECTIVE: JUNE 17, 1999 * PRODUCT: Crankshaft Hub Harmonic Dampers 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for
QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL
QUALITY REQUIREMENTS FOR JUST IN TIME SERVICE PROVIDER (JIT S.P.) PROGRAM: ALL THE CONTENT OF THIS DOCUMENT IS THE PROPERTY OF ALENIA AERONAUTICA S.p.A. THIS DOCUMENT IS SUPPLIED IN CONFIDENCE AND COMMERCIAL
DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
Connection Ports: 3/4 1 1/4 BSP (other thread options on request)
HYDRAULIC FILTRATION Medium pressure, in line spin-on filters Technical Information Pressure: Max working (acc. to NFPA T 3.10.17): FA-4-1x: 34,5 bar (500 psi) FA-4-21: 24 bar (348 psi) Burst (acc. to
SPECIFICATION: OPERATION: (Dimensional drawing on following page)
Electronic Showers Hardwire Operated (86T) - Push button electronic shower system Model No: 86T7 COMPLIES WITH: SPECIFICATION: ASME A.8. / CSA B. Volume Control lever handle ADA compliant to ICC / ANSI
Policy for TSO Aircraft Seats
Policy for TSO Aircraft Seats Presented to: EASA ETSO/TSO Seat Workshop Presented to: By: By: Hal Jensen Date: 4 December 2008 Date: TSO Seat Policy FAA policy memos for TSO Seats: Using SAE ARP5526, Aircraft
Manufactured in compliance with NSF/ANSI a
IAPMO esearch and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
UL TEST REPORT AND PROCEDURE
Issue Date: 2010-04-01 Page 1 of 8 Report Reference # E229738-A1-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment
Corrosion Coupon Rack Operations & Maintenance Manual
Corrosion Coupon Rack Operations & Maintenance Manual Record Your Model, Serial Number and Other Information on the back of this document. Manufacturing: Bypass & Filter Feeders, Glycol Feed Packages,
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
Evaluation Report CCMC R Ram Jack Helical Foundation Systems and Devices
Evaluation Report CCMC 14039-R Ram Jack Helical Foundation Systems and Devices MasterFormat: 31 62 16.01 Evaluation issued: 2016-07-28 Re-evaluation due: 2019-07-28 1. Opinion It is the opinion of the
RENFROE. WARNING: Before putting tool in service, take to your immediate supervisor.
WARNING: Before putting tool in service, take to your immediate supervisor. RENFROE Model NM Clamp Application, Operation and Maintenance Manual OM 211-NM Operators Manual This Operator s Manual covers
Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose
INTERNATIONAL STANDARD ISO 14541 First edition 2013-03-15 Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose Transmissions hydrauliques Dimensions
MARKING STANDARD FOR SPRAY NOZZLES USED WITH PORTABLE PRESSURE WASHERS
PWMA PW301-2012 PWMA Standard MARKING STANDARD FOR SPRAY NOZZLES USED WITH PORTABLE PRESSURE WASHERS Pressure Washer Manufacturers Association Sponsor: 1300 Sumner Avenue Cleveland, Ohio 44115-2851 www.pwma.org
SFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 *
SFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 * PRODUCT: Drag Race Front Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
FOR TECHNICAL ASSISTANCE
ACORN ENGINEERING COMPANY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744 UNITED STATES OF AMERICA WWW.ACORNENG.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS ST70 LAVATORY TEMPERING VALVE Patent #9,989,017
Connection Ports: 1/2 1 1/2 BSP (other thread options on request) aluminium alloy NBR (FKM on request)
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working (acc. to NFPA T 3.1.5.1): F1-XD4/63/1: 1 bar (15 psi) F1-XD16/25/4: 8 bar (12 psi) Housing Burst (acc. to
Performance of Batteries in Grid Connected Energy Storage Systems. June 2018
Performance of Batteries in Grid Connected Energy Storage Systems June 2018 PERFORMANCE OF BATTERIES IN GRID CONNECTED ENERGY STORAGE SYSTEMS Authors Laurie Florence, Principal Engineer, UL LLC Northbrook,
State of California AIR RESOURCES BOARD. EXECUTIVE ORDER D 428 Relating to Exemptions Under Section of the Vehicle Code
(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 428 Relating to Exemptions Under Section 27156 of the Vehicle Code KENNEDY ENGINEERED PRODUCTS VW VANAGON ENGINE CHANGE KIT Pursuant
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 *
SFI SPECIFICATION 1.1 EFFECTIVE: NOVEMBER 9, 2001 * PRODUCT: Replacement Flywheels and Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum
UL TEST REPORT AND PROCEDURE
Issue Date: 2012-08-17 Page 1 of 21 Report Reference # E186249-A203-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2011-12-19 (Information
National Board Update
National Board Update Presentation to the Valve Repair Council June 2, 2016 Prepared by: Joseph F. Ball, P.E. National Board Update National Board activities Who we are and what we do National Board Inspection
Originally Issued: 09/26/2012 Revised: 09/29/2017 Valid Through: 09/30/2018
EVALUATION SUBJECT: FAKRO FX, FV FVE, FX-EL, FV-ELA, AND FVE-ELA SKYLIGHTS REPORT HOLDER: FAKRO GROUP 144A WEGIERSKA STREET 33 300 NOWY SACZ POLAND 48 18-444 0444 www.fakro.info CSI Division: 08 00 00
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
Installation Instructions. Install Hubs Set Spacing Install Element FINISHED BORE INTERFERENCE FIT. Step 1 - HUB INSTALLATION
Instruction Manual for Baldor Dodge Raptor Spacer Couplings These instructions must be read thoroughly before installing or operating this product. Video walkthroughs of each installation procedure are
Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1)
Roxar 2 Mechanical Access Fitting System FA-T217-B Product Data Sheet 06.07.2015 Roxar 2 Mechanical Access Fitting System Pressure ratings up to 6,000 psi/420 bar or 10,000 psi/690 bar 1) High Pressure
Phantom Screen s Motorized Retractable Screens Are the Only Choice
WHITE PAPER Phantom Screen s Motorized Retractable Screens Are the Only Choice To ensure safety and performance, only UL or CSA compliant motorized retractable screens should be used in construction projects
ISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
NCC CODE OF PRACTICE 502
NCC CODE OF PRACTICE 502 WHEEL & TYRE CONFIGURATIONS FOR CARAVAN HOLIDAY-HOMES & PARK HOMES ISSUE 1 8 June 1998 FOREWARD This Code of Practice has been drawn up by the National Caravan Council to ensure
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels
SFI SPECIFICATION 15.4 EFFECTIVE: JULY 20, 2010 * PRODUCT: Top Fuel and Funny Car Drag Race Drive Beadlock Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies
SFI SPECIFICATION 1.3 EFFECTIVE: MAY 23, 2000 * PRODUCT: Nitro-Methane Drag Race Multiple Disc Clutch Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and
FOR TECHNICAL ASSISTANCE
ACORN ENGINEERING COMPANY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744 UNITED STATES OF AMERICA WWW.ACORNENG.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS SV16 TEMPERATURE/PRESSURE BALANCING MIXING
introduction < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F437 ASTM F1498 IPEX EasyFit SXE Ball Check Valves represent the latest innovation in thermoplastic
STANDARD FOR TESTING AND RATING PERFORMANCE OF PRESSURE WASHERS: DETERMINATION OF PRESSURE AND WATER FLOW
PWMA PW101-2010 PWMA Standard STANDARD FOR TESTING AND RATING PERFORMANCE OF PRESSURE WASHERS: DETERMINATION OF PRESSURE AND WATER FLOW Pressure Washer Manufacturers Association Sponsor: 1300 Sumner Avenue
Spray Pressure Control Manifold
Instruction Sheet P/N 0870G0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
SECTION XI. Subject Interpretation File No.
SECTION XI Subject Interpretation File No. Appendix I, Supplement 9 (1995 Edition With the 1996 Addenda Through the 2005 Addenda).... XI-1-04-34 IN05-017 Appendix VIII, Qualification of Personnel With
PRODUCT CONFORMITY CERTIFICATE
PRODUCT CONFORMITY CERTIFICATE This is to certify that the testo 350 portable flue gas analyser Manufactured by: testo AG Testo-Strasse 1 79853 Lenzkirch Germany Has been assessed by Sira Certification
EXECUTIVE ORDER D 526. Relating to Exemptions Under Section of the California Vehicle Code
State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 526 Relating to Exemptions Under Section 27156 of the California Vehicle Code Volant Air Intake Systems Volant Performance Air Intake System Pursuant
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 5
National Research Council Conseil national de recherches Canada Canada Measurement Standards and Science Science des mesures et étalons Calibration Laboratory Assessment Service CLAS Certificate Number
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7637-3 Third edition 2016-07-01 Road vehicles Electrical disturbances from conduction and coupling Part 3: Electrical transient transmission by capacitive and inductive coupling
Man Rider and Personnel Lifting Winches
Man Rider and Personnel Lifting Winches Dedicated 150 kg (330 lb) Dual Purpose 920-5,000 kg (2,035-11,000 lb) When Tough Just Isn t Enough Dedicated 150 kg (330 lb) and Dual Purpose 920-5,000 kg (2,035-11,000
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28761-0 SOUTH AFRICAN NATIONAL STANDARD Earthing of low-voltage (LV) distribution systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
State of California AIR RESOURCES BOARD. EXECUTIVE ORDER D Relating to Exemptions Under Section of the Vehicle Code
(Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 176 11 Relating to Exemptions Under Section 27156 of the Vehicle Code DINAN ENGINEERING, INC. HIGH FLOW COLD AIR INTAKE SYSTEM Pursuant
Spray Pressure Control Manifold
Instruction Sheet P/N 0870-0 WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. Introduction The
DRAFT AUTHORITY TO CONSTRUCT
A/C NO.: 25780 ISSUED BY: DATE ISSUED: TBD JORGE DEGUZMAN DATE EXPIRES: ISSUED TO: TBD PRIME DATA CENTERS DBA SVO BUILDING ONE LLC LOCATION: 2407 AK ST., MCCLELLAN PARK, CA 95652 DESCRIPTION: IC ENGINE
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Nominal sizes 08 to 10, special cavities
Nominal sizes 08 to 10, special cavities RE 18301-91 Edition: 05.2016 Replaces: 07.2012 Contents Relief, direct acting guided poppet type Common cavity, Size 10 2 Relief, direct acting guided poppet type
5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS
Summary Description 5.0 REACTOR COOLANT SYSTEM AND CONNECTED SYSTEMS This chapter of the U.S. EPR Final Safety Analysis Report (FSAR) is incorporated by reference with supplements as identified in the
GREENER SHIPPING SUMMIT 2017
GREENER SHIPPING SUMMIT 2017 EU MRV Regulation Methods of Data Collection of Fuel Differences/Consequences/Evaluation of Methods Antonios Georgantzis 14 November 2017 Eugenides Foundation The EU MRV Timeline
Pursuant to the authority vested in the undersigned by Sections and of the Health and Safety Code and Executive Order G 45 9;
se86ies (Page 1 of 2) State of California AIR RESOURCES BOARD EXECUTIVE ORDER D 431 Relating to Exemptions Under Section 27156 of the Vehicle Code FORD MOTOR COMPANY ECONOLINE AFT OF AXLE FUEL TANK KITS
SERIES VC. 1/2 to 1-1/2 Carbon Steel V-Port Control Ball Valve
SERIES VC 1/2 to 1-1/2 Carbon Steel V-Port Control all Valve Publication SVC000-101 Issue 1/18 Rev. C General Information Modified V-Port cast directly into the ball High Rangeability: 300:1 Turn down
Safety relief valves and double stop valves, type SFVL and DSVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves and double stop valves, type and REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Introduction The safety valves are backpressure dependent pressure relief valves.
SFI SPECIFICATION 49.2 EFFECTIVE: MARCH 22, 2011 *
SFI SPECIFICATION 49.2 EFFECTIVE: MARCH 22, 2011 * PRODUCT: Top Fuel Front Wing Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for
Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan Ford Customer Service Division
Michael A. Berardi Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division TO: SUBJECT: AFFECTED VEHICLES All U.S. Ford and Lincoln
MARPOL Annex VI Emission Control Areas. CDR Ryan Allain U.S. Coast Guard Environmental Standards Division Washington, D.C.
MARPOL Annex VI Emission Control Areas CDR Ryan Allain U.S. Coast Guard Environmental Standards Division Washington, D.C. ECA Requirements Why? Compliance with the MARPOL Annex VI air emission standards,
UL TEST REPORT AND PROCEDURE
Issue Date: 2012-03-23 Page 1 of 16 Report Reference # E186249-A202-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2011-12-19 (Information
PASSENGER CAR/CUV DRIVE LUXURIOUSLY TOYOTIRES.COM TOYO TIRE U.S.A. CORP. P.O. BOX 6052 CYPRESS, CA
TOYOTIRES.COM TOYO TIRE U.S.A. CORP. P.O. BOX 6052 CYPRESS, CA 90630 800.442.8696 PASSENGER CAR/CUV DRIVE LUXURIOUSLY 2014 Toyo Tire U.S.A. Corp. Published July 2014 #0180141 WE ARE SMOOTH AND STEADY AND
SFI SPECIFICATION 28.1 EFFECTIVE: AUGUST 25, 2017 *
SFI SPECIFICATION 28.1 EFFECTIVE: AUGUST 25, 2017 * PRODUCT: Polymer (Foam-Filled) Fuel Cells 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels
PFI Quality Assurance/Quality Control (QA/QC) Program for Residential/Commercial Densified Fuels Scope: This program must be utilized by participating pellet fuel manufacturers to assure consistent quality
Effective Date: June Rev. 7/20/2017- Void After: June 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
CITY OF SANTA ROSA CITY COUNCIL MAYOR AND CITY COUNCIL APPROVAL OF THE FRANCHISE AGREEMENT FOR VEHICLE TOW SERVICES FOR THE CITY OF SANTA ROSA
CITY OF SANTA ROSA CITY COUNCIL Agenda Item #12.4 For Council Meeting of: August 27, 2013 TO: SUBJECT: STAFF PRESENTER: MAYOR AND CITY COUNCIL APPROVAL OF THE FRANCHISE AGREEMENT FOR VEHICLE TOW SERVICES