On tool udsugningskit
|
|
- Todd Atkinson
- 5 years ago
- Views:
Transcription
1 Støvudsugning ved kilden er den mest effektive metode til at indfange støv ved fræsning, slibning, blæsning og skæring Nedermans tilkoblingssæt til håndholdt værktøj fjerner effektivt støv under slibning, sandslibning og skæring. Disse arbejdsprocesser skaber store mængder støv. Luftbåret støv og fine partikler kan være skadelige for menneskers helbred og skal udsuges ved kilden, inden de når frem til indåndingsluften. Operatøren skal altid være beskyttet mod inhalering af støv. Udsugning på værktøjet er effektiv og sikrer også fremragende bevægelsesfrihed og fleksibilitet for operatøren. Nedermans sæt kan kobles til håndholdte elektriske og pneumatiske værktøj. Alt frembragt støv fanges ved kilden Høj sigtbarhed under arbejdet Gør det lettere at holde din arbejdsplads ren Bredt udvalg til alle slags værktøjer Produkt navn Diameter, slange (mm) 38 On tool udsugningskit
2 ATA RA-10LR 125 m3/h Cutting AtlasCopco G m3/h Cutting AtlasCopco G m3/h Grinding AtlasCopco LSF 27 S180 / m3/h Drilling AtlasCopco LSF m3/h AtlasCopco LSV 27 S040/S m3/h AtlasCopco LSV 27 S040/S m3/h AtlasCopco G m3/h AtlasCopco LSV 38 ST12/SA m3/h Grinding AtlasCopco LSV 27 / LSV 28 / LSV 36 ST m3/h Grinding AtlasCopco LSV 38 D m3/h Cutting AtlasCopco LSV 38 D m3/h AtlasCopco LSV 37 S066/S m3/h AtlasCopco LSV 37 S066/S m3/h AtlasCopco LSV 38 D m3/h
3 Cutting AtlasCopco G m3/h AtlasCopco G m3/h Grinding AtlasCopco LSS 52/ LSS 53 S m3/h Edge trimming AtlasCopco LSF 16 S m3/h Edge trimming AtlasCopco LSF m3/h Edge trimming AtlasCopco LSF 27 S120 / m3/h Drilling AtlasCopco pro D m3/h Cutting AtlasCopco GTG 40 F m3/h Edge trimming AtlasCopco LSK m3/h AtlasCopco LSV 26/LSV 27/ LSV 28 S m3/h Grinding AtlasCopco GTG 40 S m3/h Grinding AtlasCopco GTG 40 F m3/h AtlasCopco GTG 40 S m3/h AtlasCopco AtlasCopco GTG 21 S085-D 250 m3/h
4 Grinding AtlasCopco GTG 21 D m3/h Cutting AtlasCopco Atlas Copca GTG 21 D m3/h Grinding AtlasCopco GTG 21 D m3/h AtlasCopco GTG 21 D m3/h AtlasCopco GTG m3/h AtlasCopco LSV 17 S120-1/B S200-1/B 125 m3/h AtlasCopco AtlasCopco LSV 48 SA066/ SA m3/h Cutting AtlasCopco LSV 48 SA m3/h AtlasCopco LSV 38 S085D 250 m3/h AtlasCopco LSV 38 D m3/h AtlasCopco AtlasCopco Atlas WS 1700/ 1801/ 1900/ m3/h Drilling AtlasCopco LBS 24 H 200 m3/h AtlasCopco GTG 21 D m3/h
5 Cutting AtlasCopco GTG 21 D m3/h Grinding AtlasCopco LSV 48 SA m3/h Grinding Bacho BAHCO SK1-60 B 250 m3/h Bosch m3/h Bosch m3/h Bosch GWS m3/h Grinding Bosch GWS E / m3/h Bosch GWS 10/ Edge trimming Bosch GGS 27L 125 m3/h Bosch GWS Chicago Pneumatic m3/h Grinding Chicago Pneumatic m3/h Chicago Pneumatic 854E 125 depr Chicago Pneumatic 3850 Ø180mm Diamond blade Chicago Pneumatic 862 / 863 / m3/h
6 Chicago Pneumatic CP m3/h Grinding Chicago Pneumatic Chicago pneumatic m3/h Chicago Pneumatic 3850 Ø180mm Fibre disc Desoutter 363 / S146 L 250 m3/h Cutting Desoutter KA16120B BY /16085B /16075B BY/ 16060B BY 5/8" 250 m3/h Desoutter KA A/B BY / KA A/B BY / KA16085 A/B 250 m3/h Desoutter KA BY/BV. KA BY/BV 250 m3/h Cutting Desoutter Desuotter KA BY/BV. KA BY/BV 250 m3h Cutting Desoutter m3/h Desoutter 363 / S146 L 250 m3/h Cutting Desoutter KA C4S 200 m3/h Desoutter KA A/B BY / KA A/B BY /KA A/B 250 m3/h Dotco 10L-12L 125 m3/h Dynabrade mod ( Original pad ) 200 m3/h Dynabrade mod 52251(originalpad 50) 125 m3/h
7 Dynabrade mod m3/h Dynabrade xxxx m3/h Flex L 1206/ 1208/ 2106/ m3/h Flex m3/h Grinding Flex LG 1507 FR / LG m3/h Grinding Flex 2806 C 250 m3/h Grinding Flex LD 1709 FR 250 m3/h Cutting Fuji FA 3 CX m3/h Grinding Georges Renault KC m3/h Georges Renault KA / m3/h Georges Renault KA / m3/h Cutting Georges Renault KA 318 C3 / 320 C3 200 m3/h Hitachi G 13 SB/SD / G 12 SI 250 m3/h Hitachi Hitachi G18SC. G18SH. G18UB / G23SF. G23UB 250 m3/h
8 Hitachi Grinding Hitachi G 13 YC / G 15 YC 250 m3/h Ingersoll Rand 7 S m3/h Ingersoll Rand 77 A 60 P m3/h Cutting Ingersoll Rand HA 120 RP 64 ML 200 m3/h Ingersoll Rand HA 120 RP 64 ML 250 m3/h Ingersoll Rand G3A120PP m3/h Ingersoll Rand G3A120PP Grinding Ingersoll Rand VT22 120P95M 200 m3/h Ingersoll Rand 317-EU 250 m3/h Cutting Ingersoll Rand HA 120 RP 64 ML 200 m3/h Cutting Makita 9524 NB 200 m3/h Makita 9562/9565/9526/9527/95 28/ m3/h Makita Makita 9227 CB
9 Makita 9067SF 250 m3/h Metabo W / / / m3/h Metabo W Metabo WE Metabo W7-125/ WE ( EU /P mod)m m3/h Metabo WE Nitto MAS m3/h Shinano SI m3/h Shinano SI m3/h Grinding Shinano SI m3/h Shinano SI2515LA Suhner UWC m3/h Suhner LWE Uryu USG 5 VL 250 m3/h Uryu USG 45 P 250 m3/h
10 Cutting Uryu UAG 40 SBL / UAG 50 SBL ( 3/8 spindle) 200 m3/h Uryu UAG 70 SBL ( 5/8 spindle ) 250 m3/h Uryu AG 180 W 250 m3/h Uryu UAG 50 SBL ( 3/8 spindle ) 250 m3/h Würth DWS m3/h Cutting Attachement kit for all Angle grinders 250 m3/h Grinding Attachement kit for all Straight grinders 250 m3/h Grinding Att kit with brush for wheel guard mm 200 m3/h Welding Att kit for Welding gun and welding robot 200 m3/h Grinding Att kit all EL-Machines mm disc 250 m3/h Grinding Att kit with brush for fit to wheel guard mm universal 250 m3/h * RBK m3/h *universal
Verktøybasert utsugssett
Støvavsug ved kilden er den mest effektive metoden for å fange opp støv ved sliping, pussing og saging. Nederman festesett for håndverktøy fjerner støv svært effektivt under sliping, pussing og saging.
More informationAfzuigkit op gereedschap
Stofafzuiging bij de bron is de meest effectieve methode om stof op te vangen bij het slijpen, schuren en snijden. Bevestigingskits van Nederman voor handgereedschappen verwijderen stof zeer efficiënt
More informationRough Grinding and Cutting off
Rough Grinding and Cutting off Working in a tough environment places high demands on the tools and on the operator. The high power-to-weight ratios of our tools make them comfortable to work with and gives
More informationBenchTop Extraction Arm FX2
The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight
More informationWIND TURBINE. Solutions for production and maintenance in the Wind Turbine industry.
WIND TURBINE Solutions for production and maintenance in the Wind Turbine industry. RENEWABLE AND CLEAN Ever since we first set sail, man has tried to control the pure power of wind. Today, wind power
More informationAutomotive Refinishing ABRASIVES
Automotive Refinishing ABRASIVES Contents GENERAL INFORMATION At Hermes, Tradition has a future................ 4 Supporting nature and the environment............. 5 Quality our trademark.....................
More informationF-System 200 Industrial, SET
Dispenser pneumatic / Dispenser manual Ruetistrasse 7 9469 Haag, Switzerland phone +41 81 772 20 00 fax +41 81 772 20 01 mixpac@sulzer.com www.sulzerchemtech.com Dispenser pneumatic - Type DP Dispenser
More informationHigh-performance products. Designed for you!
High-performance products. Designed for you! Impact Wrenches CP6748EX-P11R ATEX Art nr 6151590570 CP6768EX-P18D ATEX Art nr 6151590580 CP6778EX-P18D ATEX Art nr 6151590590 Dust-proof (IP6) and ATEX certified
More informationPRODUCT DOSSIER DEWALT SAG DW825
PRODUCT DOSSIER DEWALT SAG DW825 SEPT 1998 Contents Attached to this Dossier : Copy of service parts lists DW825-----A Copy of service parts drawings E12512 Repair Instructions ATTACHED Introduction Capacity
More informationAbout Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
More informationPOWER TOOLS ABRASIVES PNEUMATICS AIR TOOLS HAND TOOLS HOSES ACCESSORIES. Catalogue
POWER TOOLS ABRASIVES PNEUMATICS AIR TOOLS HAND TOOLS HOSES ACCESSORIES Catalogue Contents Page Contents Page KOBALT TOOLS... 1-2 RED FOX TOOLS... 3 AKARI PROFESSIONAL TOOLS... 5-9 CUT OF WHEELS... 11
More informationREPAIR KITS AND PARTS
REPAIR KITS AND PARTS INGERSOLL-RAND REPAIR KITS AND PARTS Even the most durable and reliable tools need preventive maintenance. You ll keep things running strong and maximize your productivity with Ingersoll-Rand
More informationMade for Life GF-04W1. Air Tire Buffer. Air Angle Die Grinders 0.5HP (115 ) (18,000 rpm) Mini Air Die Grinders 0.3HP (25,000 rpm)
Air Tire Buffer Spindle Thread 502653 3/8" Mini Air Die Grinders 0.3HP (25,000 rpm) Spindle Thread 125036 6mm 125032 1/4" Mini Air Angle Die Grinders 0.3HP (90 ) (20,000 rpm) 120036 6mm 120032 1/4" Air
More information80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE
3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800
More informationCP3650 Series CP AB & CP AB Angle Sanders
32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring
More informationWood Working and Parquet Treatment ABRASIVES
Wood Working and Parquet Treatment ABRASIVES Contents GENERAL INFORMATION At Hermes, Tradition has a future. 4 Quality our trademark. 5 Supporting nature and the environment. 5 Ordering made easy. 5 Using
More informationItem Description Qty Ordered Unit Cost Line Total BOSCH EXACT ION $ $4,034.00
PO List Item Description Qty Ordered Unit Cost Line Total 11/13/18 BOSCH REXROTH CANADA CORP (^BOSCR) PO# 000073911 6 honda + 2 stock 0602494412 BOSCH EXACT ION 6-1500 0602494412 8 $504.25 $4,034.00 $4,034.00
More informationEdition 3 July Air Grinder. M2 Series. Parts Information. Save These Instructions
48420541 Edition 3 July 2015 Air Grinder M2 Series Parts Information Save These Instructions M2 Series Air Grinders - Exploded View (Motor & Motor Housing) 22 21 16 14 15 13 7 5 4 2 1 20 12 6 3 31 29 28
More informationFor the Professional/Contractor Flap Discs for Angle Grinders
Flap Discs for Angle Grinders Vortec Abrasive Pro Coated Abrasive Flap Discs save both time and money! No need to switch from a Type 27 grinding wheel to a resin fiber disc because flap discs grind and
More informationIntelligent Packaging Solutions
Intelligent Packaging Solutions Hofstätter & Ebbesen A/S Højvangen 19 3060 Espergærde Denmark Tel +45 4912 2122 Fax +45 4912 2199 info@ultraplast.dk www.ultraplast.dk UltraPlast is a hi-tech company specializing
More informationG10SR3(H6) 100mm Angle Grinder
CORDLESS PNEUMATIC DRILLING ROTARY & Model Wheel Diameter Input Power QUICK REFERENCE GUIDE FOR GRINDERS Spindle Thread Anti Vibe Handle UVP Switch Type Trigger Lock G10SN 100mm 840W 10000 (min-1) M10
More informationTools and More. Tools for industrial applications. Your Needs. Our Solutions. Pneumatics. Electrics.
Tools and More Hydraulics Electrics Technical Service Tools for industrial applications We at HOLGER CLASEN provide our customers with tailor-made solutions and a comprehensive "Tools and More service,
More informationNCF 60 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationHTR Precisions Cutting Tools is proud to offer you the complete range of cutting tools of superior quality according to international standards.
2015 2016 Introduction HTR Precision Cutting Tools is a wholly owned black empowered company incorporated for the purpose of manufacturing and supplying precision cutting tools, in response to the growing
More informationHigh-performance products. Designed for you!
www.cp.com High-performance products. Designed for you! Impact Wrenches Socket Retention Handle Type Friction Ring (FR) Hole (H) Pin Retainer (P) Quick Change - 7/1 Hex (QC) Pistol (P) D Handle Inside
More informationParts Information. Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders. Save These Instructions. G1 Series (Angle)
80156458 Edition 5 May 2014 Air Grinders, Air Die Grinders, Air Sanders and Air Belt Sanders G1 Series (Angle) Parts Information Save These Instructions G1 Series (Angle) Air Grinder, Die Grinder, Sander
More informationBONDED BONDED SANDING FLAP DISCS FLAP DISCS BONDED DIAMOND ABRASIVES
DIAMOND BONDED FLAP DISCS FLAP DISCS SANDING BONDED BONDED ABRASIVES www..co.uk PERFORMANCE SO GOOD IT RAISES YOURS DEMAND DeWALT ABRASIVES All of our EXTREME rated bonded abrasives comprise of: A high
More informationCross Reference FUEL INJECTION CORPORATION. Bosch to FIC Part # FIC # Bosch to FIC Part # FIC # Bosch to FIC Part # FIC # Part # FIC # Part # FIC #
0 261 200 007 150083 0 280 000 139 140139 0 280 000 563 140563 0 280 100 053 200053 0 280 150 725 380725 0 261 200 008 150084 0 280 000 141 140141 0 280 000 564 140564 0 280 100 054 200054 0 280 150 730
More informationAngle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
More informationHONDA NO ENGINE DESCRIPTION FULL SET HEAD SET CYL. HEAD CHK-9827SK 061A1-PH A1-PH2-010 CHK-9845SA PR PR3-000
1 A20A ACCORD 2000 1985-ON 1955CC CA5-110 86mm 2 B16A INTEGRA CRX 1991-1595CC CHK-9827SK 061A1-PH4-000 061A1-PH2-010 CHK-9845SA 06110-PR3-000 06111-PR3-000 VHK-9827SK 061A1-PH4-000H VHK-9845SA 061A1-PR3-010H
More informationNCF fans 50 Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationMINI PRISLISTE. JULI 2018.
MINI PRISLISTE. JULI 2018. MINI Clubman Effekt hk Forbrug km/l CO₂ emission Energiklasse Vejl. udsalgspris dkr. COOPER CLUBMAN 136 17,2 131 B 295 700 COOPER S CLUBMAN 192 15,2 151 C 373 900 Priserne er
More informationThe Leading Manufacturer of Forged Hand and Power Tool Accessories Since 1946
The Leading Manufacturer of Forged Hand and Power Tool Accessories Since 1946 www.ajaxtools.com Table of Contents ZIP GUN CHISELS & ACCESSORIES Turn Type Chisels........... 6,7,9 Non-Turn Type Chisels...........
More information3. General Description
. General Description A: CAUTION When servicing a vehicle, be sure to turn the ignition switch to OFF, disconnect the ground cable from battery, and wait for more than 0 seconds before starting work. The
More information3260:- 1/2 6220:- 3/4 6220:- 1
3260:- 1/2 6220:- 3/4 6220:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More information2666:- 1/2 5095:- 3/4 5095:- 1
2666:- 1/2 5095:- 3/4 5095:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationRAY. Product Manual Produkthåndbok
Product Manual Produkthåndbok ENG/NO Technical Specifications/ Tekniske Spesifikasjoner Type/Type 1 Type/Type 2 Description/ Beskrivelse Product number/ 100310 Produktnummer Vehicle interface/ 1P 16A T1
More informationEdition 1 June Air Grinder and Die Grinder. TA and TXA Series, Angle. Parts Information. Save These Instructions
16574055 Edition 1 June 2006 Air Grinder and Die Grinder TA and TXA Series, Angle Parts Information Save These Instructions TA and TXA Angle Grinder and Die Grinder Exploded Diagram 41 45 60 43 46 47 40
More informationCORE DRILL, HILTI MDL. DD130,
1 1 CORE DRILL, HILTI MDL. DD130, w/extra diamond core bit 2 1 HAND-HELD PIPE THREADER, RIDGID 3 1 LOT OF DISC GRINDERS, 7" 4 1 LOT OF DISC GRINDERS, 7" (2) 5 1 LOT OF ANGLE GRINDERS, 4-1/2" 6 1 LOT OF
More informationEdition 5 September Air Grinder, Die Grinder and Sander. G2 Series (Angle) Parts Information. Save These Instructions
04581237 Edition 5 September 2008 Air Grinder, Die Grinder and Sander G2 Series (Angle) Parts Information Save These Instructions G2 Series (Angle) Air Grinder, Air Die Grinder and Air Sander Exploded
More informationEquipment available due to closure
Premfab - Fabrication and Engineering Equipment available due to closure (Ends: 2016-07-06 14:00:00.0) Premfab - Fabrication and Engineering Equipment available due to closure BUYERS PREMIUM 15% VAT 20%
More informationUK RANGE CATALOGUE NEW 2016 RANGE
UK RANGE CATALOGUE 2016-17 NEW 2016 RANGE POWER TOOLS STATIONARY GARDEN TOOLS ACCESSORIES Purchase as a kit...or buy separately OUR ONE BATTERY FITS ALL FAMILY > > SAVE s > > SAVE s + + POWERS 14 POWER
More informationEdition 2 May Air Drill. 6L Series. Parts Information. Save These Instructions
45612710 Edition 2 May 2014 Air Drill 6L Series Parts Information Save These Instructions Air Drill 6L Series Motor and Gearing Exploded Diagram 28 26 25 23 24 22 18 21 20 19 1 2 6 14 13 10 5 12 11 7 3
More informationDATE: February 13, 2019 Service Instruction No. 1037V (Supersedes Service Instruction No. 1037U) Engineering Aspects are FAA Approved
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
More informationCATALOG March 2017 CATALOG AIR TOOLS AND LAMPS. p. 1/42 Atttrezzi&utensili
March 2017 CATALOG AIR TOOLS AND LAMPS http://www.attrezzieutensili.it/en p. 1/42 Atttrezzi&utensili AIR TOOLS AND LAMPS Air Tools Impact Wrenches Disk Grinders Die Grinders Flashlights Corded Lights Battery
More informationMETABO Power Tools Drills
212 50 Pennsylvania Avenue Warwick, Rhode Island 02888 Anchors Drilling, Tapping Strut Firestop Contractor BE560 3/8" Drill 00557 Robust split housing Long-life motor Torque 40 inch lbs. steel: 3/8" softwood:
More informationEnd of the Year Sale - great savings! 4-1/2" 6 Amp Small Angle Grinder with Sealed Switch Includes: Grinder, Cut-off disc, Sanding discs, Wire cup brush, Wire cup wheels, Side handle, Adjustable guard,
More informationFor maximum material removal with minimum effort, choose the best tool.
RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,
More informationMicroswitch - SERIES MP110
Microswitch - SERIES MP0 Description MP0 Approval EN 6058-50VAC/5A 50 000 cycles EN 6058-00VAC/0A 50 000 cycles UL 6058-50VAC/5A 50 000 cycles UL 6058-00VAC/0A 50 000 cycles Resistive load MP0 Sealed basic
More informationIndustrial Technique. Göran Gezelius
Industrial Technique Göran Gezelius Industrial Technique Market Position World leading supplier of industrial power tools and assembly systems for industrial manufacturing Major supplier of professional
More informationParts / Accessories E 03 / High Quality Products for maximum requirements Made in Germany
/ Accessories E 03 / 20 High Quality Products for maximum requirements Made in Germany CONTENTS AC / CC Pliers Arm sets, electrodes, caps MTX 4900 / MX 4900 / MX 3900 arm sets, electrodes, caps C-Pliers
More informationNCF fans 60Hz. Protection class IP 55
The Nederman NCF Fans have direct drive motors which means a safe and cost effective operation. Installing an energy efficient NCF fan with our other Nederman products saves time and reduces energy costs.
More informationEdition 2 October Air Die Grinder. M2 Series. Parts Information. Save These Instructions
48420558 Edition 2 October 2013 Air Die Grinder M2 Series Parts Information Save These Instructions M2 Series, Air Die Grinder - Exploded View (Motor & Motor Housing) 16 1 21 14 15 13 7 5 4 3 2 12 30 28
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationType 27 Wheel with Built -In Adapter. Vertical Grinders for use with Cup Wheels (Type 6 & Type 11) Type 11 Wheel. Diamond Wheels
Vertical Grinders INFORMATION PAGE Page Power Description 5 6 7 58C 68C Vertical Grinders for use with Depressed Center s (Type 27, Type 28 & Type 29) Type 27 with Built -In Adapter Vertical Grinders for
More informationStars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON
Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately
More informationOil and Gas. Solutions for production, turn-arounds and maintenance in the Oil & Gas industry.
Oil and Gas Solutions for production, turn-arounds and maintenance in the Oil & Gas industry. CHALLENGING APPLICATIONS AND TOUGH ENVIRONMENTS Ever since we first struck oil, it has been a vital asset
More informationYour Source For Solutions
Your Source For Solutions COLDWATER OHIO GREENVILLE On Time Delivery Inventory to Meet Your Needs Check out our extensive line card in the back section of this brochure. For more than 55 years Lefeld Welding
More informationCaM PAIG n. special offer autumn High-performance products. Designed for you!
CaM PAIG n special offer autumn 2017 High-performance products. Designed for you! Impact wrenches Versatile tool ideal for all general repairs and maintenance applications 271 Nm of maximum torque in reverse
More informationSUMMER BEAT THE HEAT EVENT. June 11 22, 2018
SUMMER BEAT THE HEAT EVENT June 11 22, 2018 PURCHASE ANY COMBINATION OF... QUALIFYING INSERTS, CONSUMABLES, ACCESSORIES SUCH AS: Bits Blades ON!Track tags Anchors Pins Firestop Collated screws Website
More information2100:- POWERFUL & LIGHTWEIGHT
POWERFUL & LIGHTWEIGHT 2100:- CP7749 1/2 Art nr 8941077491 Max torque (rev): 1,300 Nm Working torque (fwd): 135-704 Nm S2S technology and 3 setting positions Free speed: 7,000 rpm Twin hammer clutch Weight
More informationCLOGGING INDICATORS SUMMING-UP DESCRIPTION
SUMMINGUP CLOGGING PRESSURE FILTERS Pressure gauges Pressure switches Differential, visual Differential, electrical Differential, el. + LED Differential, el. + thermostat Differential, el. + visual Differential,
More informationCordless Tools Lithium-ion Technology
22 Professional Blue Power Tools for Trade & Industry Cordless Tools Lithium-ion Technology 00% drill/driver at half the size Only half the size of a 2-volt standard cordless drill/driver Professional
More informationParts Manual PL
Parts Manual PL30-027-7 45-828 03/0/20 0L27 & 0K27 Series Low Profile Right Angle Grinder/Sander 2 Series Handles Shown Throttle Type Free Speed (RPM) Grinders / Sanders Termination 2,000 3,500 4,500 Type
More information.4 hp Die Grinders & Disc Sanders
.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head
More information9500:- SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER. CP AA5VK Art nr SPECIAL OFFER OFFER. People. Passion. Performance.
SUPERLATIVE PERFORMANCE & ERGONOMICS AUTOBALANCER 9500:- P remium Tool CP3650-120AA5VK Art nr 6151607180 Spindle thread:...m14 Wheel size:...125 mm Power:...1700 W Free speed:...12000 rpm Length:...238
More informationBackuum. Model: NILFISK BACKUUM HEPA NILFISK BACKUUM STANDARD. Stykliste Dansk
Model: NILFISK BACKUUM HEPA NILFISK BACKUUM STANDARD Stykliste Dansk Indholdsfortegnelse Nozzles 32 mm 3 Inlet coupling and hoses 38-32 mm 5 Motor- og ledningstyper 7 Upper part 9 Lower part 11 Electrical
More informationStrokes Strokes Double acting. Min. stroke with 2 sensors Ø Single acting. Single acting
S version Type... Standards... Cushioning... Rated temperature... Fluid... Working pressure... Proximity switch... Mounting and accessories... Materials... Single and double acting pneumatic microcylinders,
More information98/99 Series Exit Devices
98/99 Series Exit Devices 98/99 Finishes Finishes* Color US Number BHMA Number Chromium, Polished US26 625 Anodized, Aluminum US28 628 Chromium, Dull US26D 626 Brass, Polished US3 605 Brass, Dull US4 606
More informationReplacement Parts Index: Acme-Gridley
Replacement Parts Index: Acme-Gridley Gr o u p Description Pa g e A Spindle Carrier & Indexing 1-10 - High Speed Indexing Kits 4 - Carrier Locking Mechanism B Work Spindles & Finger Holders 11-38 - Collet
More informationFrame compl. SK81. Optional. Taillift types Slider lifts SK Sales Article: Description Sales Article:
Taillift types Slider lifts SK-0 Frame compl. SK 0 Optional XF.SKS.CA.O.VK Frame SKS - Snr XH.SK.CA.LE Lift arm SK + Snr G.LL Hydr.power pack left KW CS0.L Tilt cylinder left CS0 + Snr CS0.R Tilt cylinder
More informationCeiling induction diffuser DISA-601
Ceiling induction diffuser DISA-601 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Phone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3
More informationEdition 3 February Air Drill, Screwdriver and Angle Wrench. 5L and 5RL. Parts Information. Save These Instructions
16572802 Edition 3 February 2014 Air Drill, Screwdriver and Angle Wrench 5L and 5RL Parts Information Save These Instructions 5L and 5RL Air Drill, Screwdriver and Angle Wrench - Exploded View 18 17 19
More informationSupplying the Aerospace, Defense & Metal Working Industries Since 1951!
Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA
More informationProduct Information G10SQ(H1) 4 (100mm) Angle Grinder
G10SQ(H1) 4 (100mm) Angle Grinder Two position handle Excellent overload durability 100mm Grinding disc Full length paddle switch Tool-less wheel guard 100mm Input power 840W 10,000 (min-1) 16mm Spindle
More informationSeries SS19 Institutional Life Safety Mortise Locksets - Levers
Series SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications
More informationArticle Group 3 Work Station for dent pulling
Article Group 3 Work Station for dent pulling Article N o Description 352000 Work-Station WS 20 400V with Dinse connec. Delivery content: 1 x Transformer WS 20 with Dinse connection 1 x trolley 1 x welding
More information+91-8048602840 Madras Tools http://www.madrastools.in/ We are engaged in distributor and supplying a broad array of Power and Pneumatic Tool to our prestigious customers. Provided products are highly demanded
More informationEdition 10 March Air Grinder, Die Grinder and Sander. G3 Series (Angle) Parts Information. Save These Instructions
80153232 Edition 10 March 2015 Air Grinder, Die Grinder and Sander G3 Series (Angle) Parts Information Save These Instructions G3 Series (Angle) Air Grinder, Die Grinder and Sander Exploded Diagram - Body
More informationDate of occurrence Location name Alnabru terminal Local time 03:40 Latitude Railway vehicle movement events Trains collision Trains collision
Occurrence Summary What Location Date of occurrence 29-04-16 Location name Alnabru terminal Local time 03:40 Latitude Event type Railway vehicle movement events Longitude Description On Friday 29 April
More informationSeries 5SS19 Institutional Life Safety Mortise Locksets - Levers
Series 5SS19 Institutional Life Safety Mortise Locksets - Levers Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI
More informationMIRROR, GLASS AND PANEL TRIM
... MIRROR, GLASS AND PANEL TRIM RIGHT SHAPES RIGHT PRICE RIGHT NOW J CAP ALUMINUM CAP FOR 1/16" MATERIAL FR 0230, BC ALUMINUM CAP FOR 3/32" MATERIAL FR 0330, BC ALUMINUM CAP FOR 5/32" MATERIAL FR 0430,
More informationParameters. Overview. Functions. HDL Buspro Definition for Cable. Important. Do you need help? Contact
BUS Enabled Motorized curtain Parameters Electrical Parameters: Type Bus voltage Rated voltage Voltage range Working voltage Bus power Consumption Slave interface Rated power Rated torque Rated speed Rail
More informationissued by Notified Body No according to 2014/32/EU MID FULL QUALITY ASSURANCE Module H
This certificate may not be reproduced other than in full, except with the pri written approval by RISE Certification. issued by Notified Body No. 040 accding to 014/3/EU MID FULL QUALITY ASSURANCE Module
More informationFuse switch-disconnectors
Fuse switch-disconnector FH00 is intended fuse-links with blade contacts size 000 and 00. It enables safe disconnection not only of rated current, but also overcurrent up to octuple rated current. A version
More information3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support
3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols SS MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina
More informationUTK/UTT - Multi-blade Damper. Halton UTK, UTT. Multi-blade Damper
Halton UTK, UTT Multi-blade Damper Temperature operation range up to +100 C, optionally up to +200 C Galvanised steel design Classification of casing leakage EN 1751 class B UTK: Shut-off, adjustment,
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationDelta Power Company 4484 Boeing Drive - Rockford, IL 61109
VALVE CATALOG MAIN INDEX RELEASED DATE: JUNE 03. QUICK SELECTION GUIDE Page SOLENOID OPERATED DIRECTIONAL CONTROLS (See ENGINEERING DATA for coil specs) Page 7 MECHANICAL DIRECTIONAL CONTROLS Page 5 PRESSURE
More informationVarius SUMMARY OF MODELS
SUMMARY OF MODELS FH000 FH00 FH FH2 FH LTL4a Rated operating current I e 60 A 60 A 250 A 400 A 60 A 600 A Rated operating voltage AC/DC U e 690 V 690 V 690 V 690 V 690 V 690 V Size 000 00 2 4a Fuse-link
More informationTEL FAX
Item Code Description ABRANET DISC 150MM X P80# 542150120 ABRANET DISC 150MM X P120# 542150180 ABRANET DISC 150MM X P180# 542150240 ABRANET DISC 150MM X P240# 542150400 ABRANET DISC 150MM X P400# 542150600
More information18V Brushless 125mm (5 ) Angle Grinder
18V Brushless 125mm (5 ) Angle Grinder WIRELESS, ON DEMAND, DUST EXTRACTION Makita s Auto-start Wireless System (AWS) has modernised on-demand dust extraction to meet the needs of cordless power tool users.
More information99.95 Kit Kit Kit. Call to order: 4:1 Clear Coat 1 Gallon with Activator Medium or Fast $ Kit
4:1 Clear Coat with Activator Kit 4:1 Clear Coat with Activator 99.95 Kit 4:1 Original Speed Klearkote with Hardener 1 Kit Business Hours: Monday Saturday, 8 a.m. 6 p.m. Sunday, 10 a.m. 6 p.m. 4:1 Speed
More informationMetalworking Equipment, Utility Trucks, Pickups, Welders, Power Tools in Oakland, CA
Metalworking Equipment, Utility Trucks, Pickups, Welders, Power Tools in Oakland, CA Auction Opens: Tue, Oct 18 9:00am Auction Closes: Thu, Oct 20 9:00am 100 1999 Ford F-450 Super Duty Utility Truck 101
More informationABRASIVES. Diamond Blade Troubleshooting. Multi-Air Backing Pads. Fibre Disc Back-Up Pads - Standard Performance
ABRASIVES 26 Diamond Blade Troubleshooting Diamond blade does not cut: Cause: The blade is too hard for the material being cut. Solution: Use a softer blade specification. Cause: The segments have become
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX
More informationLarge Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock & Consumables
Stanref International Ltd, Pressure (Ends: 2018-04-24 14:00:00.0) Vessel Manufacturing Equipment.(Further lots to be added) Large Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock
More informationCOMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO
angle GrInDErS COMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO For grinding, cutting, polishing or sanding, angle grinders by Metabo are world leaders. If there s one thing we
More informationAUDI A A A A A A A A A A A A A A A
AUDI A4 04-07 07-A404-01E2-8E0941004AJ 8E0941003AJ 07-A404-05 8E0941700E 8E0941699E 07-A404-03 8E0807105GRU 07-A404-04 07-A404-07 8E0853651J1QP 07-A404-05C3 BUMPER 07-A404-07P1 LICENSE PLATE 8E0807285M1QP
More informationIndex. Grinders Features. Grinders at a glance (by Wattage) Accessories. Safety Instructions
Grinder Catalogue Index Grinders Features 9553HN, 9554HN, 9555HN, 9556HN, 9557HN, 9558HN GA30, GA4530, GA5030 9556HP, 9557HP, 9558HP 9564HZ, 9564C, 9564CV, 9565HZ, 9565CV, 9565CVL 9561CR, 9562CR GA7020,
More information