Table of Contents Air Brake Tests Basic Conductor/Certification Course Basic Conductor/Mechanical (Combination Package) Basic Hazardous Materials

Transcription

1 Course Catalogue 2009

2 Table of Contents Air Brake Tests 1 Basic Conductor/Certification Course 2 Basic Conductor/Mechanical (Combination Package) 3 Basic Hazardous Materials 4 Basic Locomotive Braking 5 Basic Locomotive Engineer/Certification Course 6 Basic Locomotive Mechanical Systems 7 Basic Locomotive Operations 8 Basic Safe Yard and Industrial Switching 9 Basic Safety Course (Combination Package) 10 Canadian Rail Operating Rules (C.R.O.R.) 11 Car Brake System 12 Car Maintenance &Locomotive Maintenance Course 13 Car Maintenance Course 14 Eastern Code Hazardous Materials Rules 15 Freight Car Inspection 16 General Code of Operating Rules (GCOR) 17 Locomotive Air Brake System 18 Locomotive Dynamic Brake System 19 Locomotive Maintenance Course 20 Personal Safety Around Rail Property and Equipment 21 Roadway Worker Protection 22 Telemetry Devices 23 Track Safety Standards Guidelines 24

3 Air Brake Tests T The Air Brake Tests lesson and quiz are designed for the conductor and locomotive engineer who will be required to perform tests of the air brake system. Their safety, the safety of others and the safe operation of railway equipment depend upon their knowledge and skill in applying these tests. Note: To purchase the Basic Conductor/Mechanical Course that includes the Air Brake Tests lesson, see the catalog listing, Basic Conductor/Mechanical. Note: To purchase the Basic Locomotive Engineer/Mechanical Braking Course that includes the Air Brake Tests lesson, see the catalog listing, Basic Locomotive Engineer/Mechanical/Locomotive Braking. Air Brake Rules and General Responsibilities Brake Pipe Leakage Test Initial Terminal Air Brake Test Locomotive Air Brake Test Conductor, Brake Person and Locomotive Engineer 1.5 hours Page 1 T March 2009

4 Basic Conductor/Certification Course ZT This course provides prerequisite knowledge that is required to attain certification. Certification is granted by your railway. This program is a combination of the following courses: Basic Hazardous Materials(T ) General Code of Operating Rules-GCOR (T-00020) Basic Conductor Mechanical (T-00030) including: Freight Car Inspection; Car Brake Inspection; Telemetry Devices; and Air Brake Tests Conductor 18 hours Page 2 ZT March 2009

5 Basic Conductor/Mechanical (Combination Package) ZT The course consists of 4 lessons, 4 quizzes, and a Basic Conductor/Mechanical Examination that includes instruction and test questions on how to: Conduct safety appliance, mechanical and air brake inspections for initial terminal, enroute, roll-by and detector system alert freight car inspections Inspect and operate the car air brake system Perform tests of the air brake system Interpret and apply the information provided by the end-of-train and head-oftrain telemetry devices This program is a combination of four courses: Freight Car Inspection (T ) Car Brake System (T ) Telemetry Devices (T ) Air Brake Tests (T ) Conductor and Brake Person 5.5 hours Page 3 ZT March 2009

6 Basic Hazardous Materials T This course covers the Department of s regulations governing the transportation of HazMat by rail. The course provides railway employees with the information they need to identify, inspect and safely transport HazMat shipments. The trainee will also learn the correct procedures for responding to and reporting HazMat emergencies. Upon completion of the lessons, an examination tests the trainee s knowledge of HazMat regulations. Classes of HazMat Placarding Requirements Switching HazMat Cars Crew Responsibilities Inspections Emergency Response Procedures Shipping Papers Key Trains Conductor, Brake Person and Locomotive Engineer 1 hour Page 4 T March 2009

7 Basic Locomotive Braking T This basic mechanical course is designed for the locomotive engineer. The course consists of 5 lessons, 5 quizzes and a Locomotive Braking Examination. Car Brake System - The Car Brake System is designed for the conductor and locomotive engineer who are required to inspect and operate the car air brake system. Locomotive Air Brake System - This lesson and quiz are designed for the locomotive engineer who will be required to operate, inspect, and test the locomotive air brake system. Operating the locomotive air brake system is one of the most critical train handling procedures. Telemetry Devices The lesson and quiz are designed for conductors and locomotive engineers who will be required to interpret and apply the information provided by the end-of-train and head-of-train telemetry devices. Locomotive Dynamic Brake System The lesson and quiz are designed for the locomotive engineer who will be required to prepare, operate and control the dynamic brake system. Air Brake Tests - The lesson and quiz are designed for the conductor and locomotive engineer who will be required to perform tests of the air brake system. Locomotive Engineer 7 hours Page 5 T March 2009

8 Basic Locomotive Engineer/Certification Course ZT This course provides prerequisite knowledge that is required to attain certification. Certification is granted by your railway. This package includes a combination of the following courses: Basic Hazardous Materials (T ) General Code of Operating Rules-GCOR (T-00020) Basic Locomotive Engineer/Locomotive Mechanical Systems (T-00060) Basic Locomotive Engineer/Locomotive Operations (T-00070) [Does not include Train Handling] Basic Locomotive Engineer/Locomotive Braking (T-00080) Locomotive Engineer 27 hours Page 6 ZT March 2009

9 Basic Locomotive Mechanical Systems T This basic mechanical course is designed for the locomotive engineer. The course consists of 8 lessons, 8 quizzes and a Locomotive Mechanical Systems Examination. Basic Diesel Electric Locomotive - Topic examples include Types and Classifications of Locomotives, Basic Locomotive Components and Locomotive Power. Locomotive Control Stands - Topic examples include Handles, Switches and Valves, Gauges, Lights and Other Controls, and Integrated Electronic Systems. Locomotive Trucks - Topics include Types of Trucks, Major Truck Components, and Traction Motors. Locomotive Diesel Engine - Topics include Diesel Engine Parts and Components, Operation of General Electric (GE) and Electro-Motive Division (EMD) Diesel Engines, and GE and EMD diesel engines. Locomotive Fuel Oil System - Topics include Fuel Oil System Components, Operation of the Fuel Oil System, Electronic Fuel Injection, and Troubleshooting the Fuel Oil System. Locomotive Lube Oil System - Topics include Lube Oil System Components, Lube Oil Dipstick Readings, and the Operation of the Lube Oil System. Locomotive Cooling Water System - Topics include Cooling Water System Components, Operation of the Cooling Water System, and the Electro-Motive Division (EMD) and the General Electric (GE) Cooling Water Systems. Locomotive Electrical System - Topics include Basic Electrical Theory, Electrical System Components, EMD Switch and Fuse Panel and Circuit Breaker Panel, EMD and GE Engine Control Panels, and the Diagnostic Information Display Panel Locomotive Engineer 4 hours Page 7 T March 2009

10 Basic Locomotive Operations T This basic mechanical course is designed for the locomotive engineer. The course consists of 4 lessons, 4 quizzes and a Locomotive Operations Examination. Engine Start and Shutdown - Topics include Start Up and Shutdown Procedures for Electro-Motive Division (EMD) and General Electric (GE) Diesel Engines. Locomotive Troubleshooting - Topics include Troubleshooting Procedures for Traction Motors, Engine, Air and Exhaust System and the Electrical System. Locomotive Safety Devices - Topics include the Electronic Alertness Device and the Overspeed Control Device. Locomotive Daily Inspections - Topics include Daily Inspections, Pre-Departure Inspections and Non-Complying Conditions. Locomotive Engineer 3 hours Page 8 T March 2009

11 Basic Safe Yard and Industrial Switching T This course covers the regulations and safe work practices for radio operation, signals, switches and switching. For example, the trainee will be provided with information on how to communicate effectively using a radio, how to avoid damaging cars and equipment when switching, and how to interpret various railroad signals. Upon completion of the lessons, an examination tests the trainee s knowledge of practices for a safe rail yard. Railroad Radio Requirements and Regulations Radio Operations Main Track Switches Other Types of Switches and Derails Guidelines for Switching Safely Railroad Signals including Hand Signals, Bells, Whistles and Markers Headlight Display Blue Signal Protection for Workmen Conductor, Brake Person 2 hours Page 9 T March 2009

12 Basic Safety Course (Combination Package) ZT This program is a combination of three courses: Basic Hazardous Materials (T ), Basic Safe Yard and Industrial Switching (T ) and Personal Safety Around Rail Property and Equipment (T ). Conductor, Brake Person and Locomotive Engineer 5 hours Page 10 ZT March 2009

13 Canadian Rail Operating Rules (C.R.O.R.) Upon successful completion of this course, trainees will have the skills and knowledge to perform basic operating tasks under the supervision of a qualified conductor in a yard and mainline environment. They will be able to demonstrate the following: Non-main track and main track rules compliance. Coupling and uncoupling procedures. Handbrake application and yard switching techniques. Safe handling of Dangerous Goods. Proper procedures relating to copying authorities. Operating Rules Non-main track rules; Main track rules; Rules applicable to switching; Radio Rules; Main track authority; Rules applied in emergencies; Systems of train control; Special Instructions; Dangerous Goods. Operations supervisors that have had limited or no exposure to train operations. 8 hours Page 11 March 2009

14 Car Brake System T The Car Brake System lesson and quiz are designed for the conductor, brake person and locomotive engineer who are required to inspect and operate the car air brake system. Note: To purchase the Basic Conductor/Mechanical Course that includes the Car Brake System lesson, see the catalog listing, Basic Conductor/Mechanical. Note: To purchase the Basic Locomotive Engineer/Mechanical/Locomotive Braking Course that includes the Car Brake System lesson, see the catalog listing, Basic Locomotive Engineer/Mechanical/Locomotive Braking. Examples of topics in the Car Brake System lesson and quiz include: Car Air Brake Components Car Air Brake System Operation Special Features of the Control Valve Air Brake Equipment Adjustments Car Handbrakes Conductor, Brake Person and Locomotive Engineer 2 hours Page 12 T March 2009

15 Car Maintenance & Locomotive Maintenance Course EM Equipment Maintenance Personnel This course is based on CFR 229, 231 and 232. The Railroad Safety Appliance Standards module consists of six lessons with an approximate completion time of 4 hours. The Railroad Power Brakes module consists of three lessons with an approximate completion time of 2.5 hours, and an examination with a completion time of approximately.5 hour. The Railroad Locomotive Safety Standards module consists of two lessons and an examination. It takes approximately 1.5 hours to complete these lessons and.5 hour to complete the examination. E Railroad Safety Appliance Standards (CFR 231) E Railroad Power Brakes (CFR 232) E Railroad Locomotive Safety Standards (CFR 229) Car Maintenance/Locomotive Maintenance Personnel 9 hours Page 13 EM March 2009

16 Car Maintenance Course EM Equipment Maintenance Personnel Designed for Car Maintenance Personnel, this course covers Railroad Safety Appliance Standards (CFR 231) and Railroad Power Brakes (CFR 232) from the Code of Federal Regulations. The Railroad Safety Appliance Standards module consists of six lessons and The Railroad Power Brakes module consists of three lessons. The topics covered in the modules are: Railroad Safety Appliance Standards (CFR 231) Course Overview Box and Other House Cars Hopper Cars and Gondolas Flat Cars Tank Cars Caboose Cars Railroad Power Brakes (CFR 232) General Brake System Requirements for Freight Trains Inspection, Periodic Maintenance and Testing of Brakes End-of-Train Devices and New Brake System Technology Car Maintenance Personnel 7 hours Page 14 EM March 2009

17 Eastern Code Hazardous Materials Rules T The Eastern Code Hazardous Materials Rules are a set of uniform instructions for employees that transport hazardous materials by rail. This course presents the information from the Eastern Code Hazardous Materials Rules handbook, supplemented with graphics and questions. The course provides railroad employees with the information they need to identify, inspect and safely transport HazMat shipments. The trainees will also learn the correct procedures for responding to and reporting HazMat emergencies. Upon completion of the three lessons, an examination tests the trainee s knowledge of the rules. General Requirements Hazard Classes Documentation Inspections Placards Markings Switching Placement in Train Key Trains Emergencies Railroad employees that are: Responsible for inspecting or transporting hazardous materials, and Employed by a railroad that follows the Eastern Code Hazardous Materials Rules 2.5 hours Page 15 T March 2009

18 Freight Car Inspection T As a conductor, the trainee will be required to conduct safety appliance, mechanical and air brake inspections. Understanding how and when to perform initial terminal, en route, roll-by and detector system alert freight car inspections will ensure safe and efficient railroad operation. Note: To purchase the Basic Conductor/Mechanical Course that includes the Freight Car Inspection lesson, see the catalog listing, Basic Conductor/Mechanical. Examples of topics covered in the Freight Car Inspection lesson and quiz include: Inspection Rules and Regulations Safety Appliances Mechanical and Air Brake inspections Interpreting and Responding to Trackside Detector Messages Conductor and Brake Person 30 minutes Page 16 T March 2009

19 General Code of Operating Rules (GCOR) T The GCOR course covers the rules that govern the operation of the railroad. The module consists of lessons and quizzes on the following rules: GCOR Glossary GCOR Section 1.0: General Responsibilities GCOR Section 2.0: Railroad Radio Rules GCOR Section 3.0: and 4.0: Standard Time and Timetables GCOR Section 5.0: Signals and Their Use GCOR Section 6.0: Movement of Trains and Engines GCOR Section 7.0: Switching GCOR Section 8.0: Switches GCOR Section 9.0: Block System Rules GCOR Section 10.0: Centralized Traffic Control (CTC) GCOR Section 14.0: Track Warrant Control (TWC) GCOR Section 15.0: Track Bulletin Rules GCOR Section 16.0: Direct Traffic Control (DTC) GCOR Scenarios Conductor and Locomotive Engineer 11 hours Page 17 T March 2009

20 Locomotive Air Brake System T As a locomotive engineer, the trainee will be required to operate, inspect, and test the locomotive air brake system. Operating the locomotive air brake system is one of the most critical train handling procedures to learn. However, the trainee must be able to explain how the system works before learning the skills to operate it effectively. Note: To purchase the Basic Locomotive Engineer Mechanical Braking Course that includes the Locomotive Air Brake System, see the catalog listing, Basic Locomotive Engineer/Mechanical/Locomotive Braking. Air Brake System Principles Locomotive Main Reservoir Air System Independent Air Brake System Automatic Air Brake System Setting Up A Multiple Unit Consist Air Flow Meter Electronic Air Brake Locomotive Engineer 1.5 hours Page 18 T March 2009

21 Locomotive Dynamic Brake System T The Locomotive Dynamic Brake System lesson and quiz are designed for the locomotive engineer who will be required to prepare, operate and control the dynamic brake system. Note: To purchase the Basic Locomotive Engineer Mechanical Braking Course that includes the Locomotive Dynamic Brake System, see the catalog listing, Basic Locomotive Engineer/Mechanical/Locomotive Braking. Components System Operation Types of Dynamic Brakes Guidelines for Using Dynamic Brakes Combining Types of Brakes Locomotive Engineer 30 minutes Page 19 T March 2009

22 Locomotive Maintenance Course EM Equipment Maintenance Personnel Designed for Locomotive Maintenance Personnel, this course covers Railroad Locomotive Safety Standards (CFR 229) and Railroad Power Brakes (CFR 232) from the Code of Federal Regulations. The Railroad Locomotive Safety Standards module consists of two lessons and an examination. The Railroad Power Brakes (CFR 232) module consists of three lessons and an examination. Railroad Locomotive Safety Standards (CFR 229) The Locomotive Inspections and Tests lesson includes topics on: Requirements. Penalties, Reports and Waivers Movement of Non-Complying Locomotives Daily Inspections Periodic Inspections Annual and Biennial Tests Main Reservoir Test and Out of Use Credit The Locomotive Safety and Design Requirements lesson includes topics on: General Requirements Draft System and Suspension System Electrical System and External Combustion Equipment Steam Generators Cabs and Cab Equipment Cab Lights and Headlights Auxiliary Lights Event Recorders Body Structure of MU Locomotives The Railroad Power Brakes (CFR 232) lesson consists of topics on: General Brake System Requirements for Freight Trains Inspection, Periodic Maintenance and Testing of Brakes End-of-Train Devices and New Brake System Technology Locomotive Maintenance Personnel 5 hours Page 20 EM March 2009

23 Personal Safety Around Rail Property and Equipment T This course covers the proper techniques for safely completing the duties of a railroad employee. The trainee is provided with the information they need to avoid becoming injured or endangering other employees. For example, the trainee will learn about the most common types of injuries, safe practices for a variety of activities and safety rules. Upon completion of the lessons, an examination tests the trainee s knowledge of personal safety. Avoiding Exertion and Motion Injuries Safe Practices for Lifting, Handbrake Operations and Aligning Couplers Fatigue Safety Goals Job Briefing Guidelines Basic Safety Rules Common to All Crafts Craft Specific Safety Rules Conductor, Brake Person and Locomotive Engineer 2 hours Page 21 T March 2009

24 Roadway Worker Protection E Engineering This course covers the Code of Federal Regulations, detailing the on track safety requirements for all roadway workers. The course meets the Federal Railroad Administration requirements concerning roadway worker protection. The trainee will learn the responsibilities for working safely and efficiently, as well as the different methods used for achieving on track safety. The course consists of two lessons, a quiz, and an examination. The Guidelines and Responsibilities lesson includes topics on: On Track Safety Personnel Responsibilities Supervision And Communication The Operating Regulations lesson includes topics on: Roadway Maintenance Machines Working Limits On Controlled Track Working Limits On Non-Controlled Track On Track Protection On Adjacent Tracks Lone Worker Individual Train Detection Train Approach Warning Track Personnel 2 hours Page 22 E March 2009

25 Telemetry Devices T As a railway conductor, locomotive engineer or brake person, the trainee will be required to interpret and apply the information provided by the end-of-train and head-of-train telemetry devices. Their safety, the safety of others and the safe operation of railway equipment depend on correctly applying this information. Note: To purchase the Basic Conductor/Mechanical Course that includes the Telemetry Devices lesson, see the catalog listing, Basic Conductor/Mechanical. Note: To purchase the Basic Locomotive Engineer/Mechanical/Locomotive Braking Course that includes the Telemetry Devices lesson, see the catalog listing, Basic Locomotive Engineer/Mechanical/Locomotive Braking. Functions and Operation of Train Telemetry Devices Specific instruction on the End-of-Train (ETD) and Head-of Train Telemetry Devices Conductor, Brake Person and Locomotive Engineer 1 hour Page 23 T March 2009

26 Track Safety Standards Guidelines E Engineering This course provides instruction and questions on the Track Safety Standards (49 CFR 213), as mandated by the FRA from the Code of Federal Regulations. The trainee will learn to recognize the various types of track defects that may be observed during a track inspection, and become familiar with the steps taken to accurately measure those defects. Once the defects have been detected and measured, the trainee will also learn the requirements for reporting defects and the remedial actions that must be taken. This course has been reviewed by the American Railway Engineering and Maintenance of Way Association (AREMA) The course consists of six lessons, a quiz, and an examination. Track Inspection Basics Track Configurations Track Geometry Defects Defects Related to Right-of-Way Defects Related to Track Structure Defects with Turnout and Track Crossings Track Personnel 10 hours Page 24 E March 2009