Thin Film. Intumescent Fire Protection. for Structural Steel. 3M Scotchkote Fire Protection Corrosion Protection Products
|
|
- Gervase Floyd
- 6 years ago
- Views:
Transcription
1 3M Scotchkote Fire Protection Thin Film Intumescent Fire Protection for Structural Steel Copon and Thortex have been rebranded to form part of the Scotchkote range of products from 3M.
2 Fire Protection Products - liquid solutions for 30, 60, 90 and 120 minutes fire protection
3 3M Scotchkote SPX 710 Waterborne Intumescent formerly Pyrotech SPX Technical Data Volume Solids 66%. V.O.C. Nil SG: 1.4 Can be applied by brush, roller or airless spray. Application Conditions 3M Scotchkote SPX 710 should not be applied when the relative humidity exceeds 80% or the surface to be coated is less than 3 C above the dew point. The product should not be applied below 7 C. Drying & Cure Times at 20 C Touch Dry: 4-6 hours. Hard Dry To Handle: Approx 12 hours depending on thickness. Full Cure: 7 Days. Minimum Overcoating: 4-6 Hours. 3M Scotchkote SPX 720 Waterborne Intumescent formerly Pyrotech SPX 90 Technical Data Volume Solids 68%. V.O.C. Nil SG: 1.34 Can be applied by brush, roller or airless spray. Application Conditions 3M Scotchkote SPX 720 should not be applied when the relative humidity exceeds 80% or the surface to be coated is less than 3 C above the dew point. The product should not be applied below 7 C. Drying & Cure Times at 20 C Touch Dry: 4-6 hours. Hard Dry To Handle: Approx 12 hours depending on thickness. Full Cure: 7 Days. Minimum Overcoating: 4-6 Hours. 3M Scotchkote SPX 730 Waterborne Intumescent Technical Data Volume Solids 65%. V.O.C. Nil SG: 1.39 Can be applied by brush, roller or airless spray. Application Conditions 3M Scotchkote SPX 730 should not be applied when the relative humidity exceeds 80% or the surface to be coated is less than 3 C above the dew point. The product should not be applied below 7 C. Drying & Cure Times at 20 C Touch Dry: 4-6 hours. Hard Dry To Handle: Approx 12 hours depending on thickness. Full Cure: 7 Days. Minimum Overcoating: 4-6 Hours. 3M Scotchkote SPX 700 series are highly specialised fire protection materials and as such we recommend that products be installed by 3rd party accredited installers. Materials are 3rd party Certifire accredited. Over the last thirty years we have achieved an international reputation in the field of high performance coatings offering reaction and resistance to fire properties. Comprehensive fire protection includes fire detection, fire containment and fire suppression. 3M Fire Solutions address all these areas. Our additional understanding of the spread of fire, smoke and toxic gases helps us to continue to create affordable fire solutions for industry. The existing 3M Fire Protection Products and the 3M Scotchkote SPX 700 series of thin film liquid intumescents (formerly Pyrotech SPX range) complement each other fully. This 3M Scotchkote SPX 700 series of waterborne single pack intumescent coatings offers 30, 60, 90 and 120 minute fire protection periods for structural steelwork. Testing has been carried out to ASFP cellular beam protocol, producing 3M Scotchkote SPX 700 series RT M is proud to be an industry leader in fire solutions worldwide. Our corporate stance of uncompromising honesty and integrity, coupled with our dedication to stringent testing and code of practice developments, helps to make buildings safer thereby protecting the people who use them. And when that dedication is backed by a brand as powerful as 3M, you get what you would expect proven reliability and outstanding service.
4 60 Minute Time Rated Fire Protection 3M Scotchkote SPX 710 Waterborne Intumescent Formerly Pyrotech SPX - Certifire Certificate No 490 Three Sided Beams Four sided Beams Four Sided Columns M Scotchkote SPX 720
5 60 Minute Time Rated Fire Protection 3M Scotchkote SPX 720 Waterborne Intumescent Formerly Pyrotech SPX 90 - Certifire Certificate No 491 Three Sided Beams Four sided Beams Four Sided Columns CHS, RHS & SHS A/V dft μm l/m²
6 90 Minute Time Rated Fire Protection 3M Scotchkote SPX 710 Waterborne Intumescent Formerly Pyrotech SPX - Certifire Certificate No 490 Three Sided Beams Four sided Beams Four Sided Columns
7 90 Minute Time Rated Fire Protection 3M Scotchkote SPX 720 Waterborne Intumescent Formerly Pyrotech SPX 90 - Certifire Certificate No 491 Three Sided Beams Four sided Beams Four Sided Columns M Scotchkote SPX 730
8 90 Minute Time Rated Fire Protection 3M Scotchkote SPX 730 Waterborne Intumescent Certifire Certificate No 645 Three Sided Beams Four Sided Beams Four Sided Columns Hollow Sections A/V dft μm l/m²
9 120 Minute Time Rated Fire Protection 3M Scotchkote SPX 730 Waterborne Intumescent Certifire Certificate No 645 Three Sided Beams Four Sided Beams Four Sided Columns Hollow Sections A/V dft μm l/m²
10 Please recycle. Printed in the United Kingdom. 3M All rights reserved Nov 08
3M Scotchkote SPX 720 Waterborne Intumescent formerly Pyrotech SPX 90
3M Scotchkote SPX 710 Waterborne Intumescent formerly Pyrotech SPX Technical Data Volume Solids 66%. V.O.C. Nil SG: 1.4 Can be applied by brush, roller or airless spray. Application Conditions 3M Scotchkote
More informationtwo component high build polyamine adduct cured coaltar epoxy primer/ coating
5 pages Revision of September 2004 DESCRIPTION two component high build polyamine adduct cured coaltar epoxy primer/ coating PRINCIPAL CHARACTERISTICS outstanding sea water resistance (outside hull and
More informationCERTIFICATE OF APPROVAL No CF 249. Yung Chi Paint & Varnish Mfg. Co., Ltd
CERTIFICATE OF APPROVAL No CF 249 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Yung Chi Paint & Varnish
More informationCERTIFICATE OF APPROVAL No CF 700 RUDOLF HENSEL GMBH
CERTIFICATE OF APPROVAL No CF 700 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Lauenburger Landstrasse
More informationSIGMASHIELD PRODUCT DATA SHEET August 22, 2018 (Revision of April 18, 2018) DESCRIPTION
DESCRIPTION Two-component, abrasion-resistant, solvent-free, amine-cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS Single coat system designed for under water hull of ice going and ice breaking
More informationSIGMAGUARD 730. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamine cured phenolic epoxy coating PRINCIPAL CHARACTERISTICS Tank coating with good chemical resistance against a wide range of chemicals Short curing periods
More informationSIGMADUR PRODUCT DATA SHEET December 12, 2014 (Revision of January 1, 2013) DESCRIPTION. Two-component, high solids polymeric urethane
DESCRIPTION Two-component, high solids polymeric urethane PRINCIPAL CHARACTERISTICS Excellent resistance to atmospheric exposure conditions Outstanding color and gloss retention Non-chalking, non-yellowing
More informationSIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS
DESCRIPTION Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS Excellent anticorrosive properties Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures
More informationSIGMACOVER 805. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION
DESCRIPTION Two-component, high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS Can be used directly to metal Very good surface wetting Excellent corrosion resistance Outstanding
More informationAMERSHIELD. PRODUCT DATA SHEET April 16, 2018 (Revision of February 3, 2016) DESCRIPTION
DESCRIPTION Two-component, polyester-acrylic aliphatic polyurethane topcoat PRINCIPAL CHARACTERISTICS Outstanding weather resistance with excellent color and gloss retention High solids, low VOC Tough,
More informationSIGMADUR 520. PRODUCT DATA SHEET December 12, 2014 (Revision of May 01, 2013) DESCRIPTION
DESCRIPTION Two-component, high-build semi-gloss aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS Easy application by roller and airless spray Unlimited recoatable Excellent resistance to
More informationCERTIFICATE OF APPROVAL No CF 5069 HILTI AG
CERTIFICATE OF APPROVAL No CF 5069 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of BU Chemicals, Feldkircherstraße
More informationCERTIFICATE OF APPROVAL No CF 557 JOTUN PAINTS (EUROPE) LIMITED
CERTIFICATE OF APPROVAL No CF 557 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Stather Road, Flixborough,
More informationNOVAGUARD 890. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 120 C (250 F) Suitable
More informationCERTIFICATE OF APPROVAL No CF 681 INTERNATIONAL PAINT LIMITED
CERTIFICATE OF APPROVAL No CF 681 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Stoneygate Lane, Felling,
More informationSIGMAGUARD CSF 660. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2009) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured epoxy coating PRINCIPAL CHARACTERISTICS Solvent-free coating for the protection of steel storage tanks against petroleum products Can be applied by
More informationSIGMATHERM 230 / PPG HI-TEMP 230
DESCRIPTION Two-component, high-build, heat-resistant phenolic epoxy coating PRINCIPAL CHARACTERISTICS Suitable as heat resistant system under insulation up to 230 C (450 F) Good anticorrosive properties
More informationSIGMAZINC 109. PRODUCT DATA SHEET January 16, 2015 (Revision of January 5, 2015) DESCRIPTION. Two-component, zinc-rich, polyamide-cured epoxy primer
DESCRIPTION Two-component, zinc-rich, polyamide-cured epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer for various paint systems Good corrosion prevention properties Quick-drying, can
More informationNOVAGUARD 840. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Clear version for glass-mat reinforced, solvent-free tank bottom
More informationTUFCOTE 1.9 HG-D HIGH GLOSS WATERBORNE ACRYLIC DTM (formerly DuPont 72P )
TUFCOTE 1.9 HG-D (formerly DuPont 72P ) Tufcote 1.9 HG-D is a high gloss, single-package, VOC conforming product (1.9 lbs./gal.) based on waterborne acrylic technology. The resulting coating delivers good
More informationtwo component polyamine cured epoxy tiecoat
5 pages Revision of April 2009 Description PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (Directive 1999/13/EC, SED) VOC (UK PG 6/23(92) appendix 3) Recommended
More informationDirective 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.
DESCRIPTION Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS Primer coat in the PHENGUARD tank coating system Excellent resistance to a wide
More informationNOVAGUARD 810. PRODUCT DATA SHEET December 11, 2014 (Revision of April 1, 2014) DESCRIPTION
DESCRIPTION Two-component, solvent-free, amine rapid-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 90 C (194 F) Suitable
More informationSIGMAPRIME 200 SERIES
DESCRIPTION Universal epoxy anticorrosive primer, based upon pure epoxy technology PRINCIPAL CHARACTERISTICS Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull,
More informationSIGMACOVER 350. PRODUCT DATA SHEET December 12, 2014 (Revision of June 1, 2014) DESCRIPTION
DESCRIPTION Two-component, high-build, polyamine-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS Surface tolerant primer/coating for wide use in Marine and Protective Coatings Marine use: suitable
More informationUK PG 6/23(92) Appendix 3: max g/l (approx. 3.6 lb/us gal) 5.7 m²/l for 100 µm (229 ft²/us gal for 4.0 mils)
DESCRIPTION Universal epoxy anticorrosive primer, based upon pure epoxy technology PRINCIPAL CHARACTERISTICS Universal epoxy primer system suitable for Ballast Tanks, Decks, Topside, Superstructure, Hull
More informationSIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION
DESCRIPTION Two-component, high solids polyamide cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Very good primer for systems with high solids epoxy buildcoats Can also be used as a system primer
More informationSIGMAZINC 68 SP / AMERCOAT 68 SP
DESCRIPTION Two-component, high solids polyamide adduct cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Designed as a system primer in various paint systems for aggressive environments Excellent
More informationTUFCOTE 3.3 PR HIGH SOLIDS FAST DRY ALKYD PRIMER (formerly DuPont 681 FD )
TUFCOTE 3.3 PR (formerly DuPont 681 FD ) Tufcote 3.3 PR is an phenolic modified medium oil, lead and chromate free, single-package, VOC conforming primer (3.3 lbs./gal.) based on DuPont alkyd technology.
More information935-Series. NORTHSTAR MS, HG Urethane Topcoat. Description:
212013 935-Series NORTHSTAR MS, HG Urethane Topcoat Description: NorthStar s 935-series is the tried and proven success of Medium Solids technology. 935 offers outstanding gloss retention, chemical resistance,
More informationUK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils)
DESCRIPTION Two-component high solids aluminum pigmented polyamine cured modified epoxy primer/coating PRINCIPAL CHARACTERISTICS Primer/coating designed for maintenance Low VOC Good flow properties Self
More informationCERTIFICATE OF APPROVAL No CF 574. Sika Deutschland GmbH
CERTIFICATE OF APPROVAL No CF 574 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Kornwestheimer Strasse
More informationSIGMAPRIME 700. PRODUCT DATA SHEET December 13, 2014 (Revision of March 1, 2014) DESCRIPTION
DESCRIPTION Universal epoxy anticorrosive primer, based upon pure epoxy technology PRINCIPAL CHARACTERISTICS Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull,
More informationCERTIFICATE OF APPROVAL No CF 5267 SHERWIN-WILLIAMS
CERTIFICATE OF APPROVAL No CF 5267 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Tower Works, Kestor
More informationNAVSEA REVIEWED ASTM F-718. Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02
Randolph Products ASTM F-718 Randogrip Metal Primer PRODUCT DESIGNATIONS Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02 MIL-PRF-24667 If this product is to be applied as part
More informationTechnical Data Sheet. Humidur ME Product Description. Manufacturer s Information
Technical Data Sheet Humidur ME Product Description Humidur ME is a 2-component solvent-free modified polyamine cured epoxy system offering the following benefits: Long term protection in highly corrosive
More informationImron 3.5 HG-C High Gloss Polyurethane Clear
Imron 3.5 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.5 lbs./gal VOC conforming aliphatic polyurethane enamel clear based on unique Axalta resin technology, producing
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC INTERFINE 979SG POLYSILOXANE COSMETIC COAT PRODUCT DESIGNATIONS Part A: SYA200 HAZE GREY Part B: SYA056 Curing Agent MIL-PRF-24635 If this product is to be applied as
More informationPDS N5.2.1 March AQUABASE Plus Engine Bay Color System PRODUCT DESCRIPTION
PDS N5.2.1 March 2016 AQUABASE Plus Engine Bay Color System PRODUCT DESCRIPTION Aquabase Plus Engine Bay Color System is designed to provide a simple process for repairs involving a specific underhood
More informationImron 3.4 HG-C High Gloss Polyurethane Clear
Imron 3.4 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.4 lbs./gal VOC conforming aliphatic polyurethane enamel clear based on unique Axalta resin technology, producing
More informationCERTIFICATE OF APPROVAL No CF 5172 ETEX BUILDING PERFORMANCE LTD
CERTIFICATE OF APPROVAL No CF 5172 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Gordano House, Marsh
More informationNAVSEA REVIEWED ASTM F-718. Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive
ASTM F-718 International Paint LLC Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive PRODUCT DESIGNATIONS Part A: ENA380 Bronze or ENA381 Aluminum (Gray) Part B: ENA383
More informationImron 2.1 HG-C High Gloss Polyurethane Clearcoat
Imron 2.1 HG-C High Gloss Polyurethane Clearcoat GENERAL DESCRIPTION Imron 2.1 HG-C High Gloss Aliphatic Polyurethane Clearcoat is a high-solids, two-package, VOC conforming, 2.1 lbs./gal, very low HAPS
More information10P20-44 High Solids Epoxy Primer
Product Group High solids epoxy primer Characteristics Product Information - A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent corrosion resistance
More informationSurface Preparation and Application of Ronass Pipe Shield 1319
Surface Preparation and Application of Ronass Pipe Shield 1319 RONASS TECHNICAL SUPPORT TEAM WWW.RONASS.COM SUPPORT@RONASS.COM PROTECTIVE COATINGS MARINE COATINGS DECORATIVE COATINGS Introduction Ronass
More informationTS90 IMPULSE. Cam action door closer
TS90 IMPULSE Cam action door closer DORMA Cam-action door closer High-tech for the global market The DORMA combines technical superiority with outstanding value, and unites advanced design with convenient
More informationOSMOSIS TREATMENT & PREVENTION. October 15
OSMOSIS TREATMENT & PREVENTION Substrate preparation Sealing the substrate with Impregard SF Fairing with Epoxygard Filling with Watertight or Blue filler Protection & finishing with Epoxygard Substrate
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint LLC Intertuf 6, Two Pack Anticorrosive Epoxy Primer PRODUCT DESIGNATIONS Part A: KH Series Part B: KHA6 MIL-PRF-336 MIL-PRF-67 If this product is to be applied as part of
More informationProduct Line Card 2018
Product Line Card 2018 Our Manufacturers Tel: 01444 243 452 The Custom Power Specialist www.gdrectifiers.co.uk Email: enquiries@gdrectifiers.co.uk About Us GD Rectifiers is a Global Manufacturer and Distributor
More informationRust Bullet Automotive FAQ s
Rust Bullet Automotive FAQ s 1. What is the difference between Rust Bullet Standard (Gold Label) and Rust Bullet Automotive (Silver Label)? Both Rust Bullet Standard and Rust Bullet Automotive are industrial
More informationTank Armor ADVANCED LINING PROTECTION
Tank Armor ADVANCED LINING PROTECTION Vessels holding hazardous materials require a highperformance lining to protect the structure and its contents. Fighting corrosion from the inside out, Tnemec s Tank
More informationRTS 87 RTS 80EMB RTS 80FLB
RTS 87 RTS 80EMB RTS 80FLB Transom concealed door closers RTS 87 DOOR CLOSER TRANSOM CONCEALED DOOR CLOSERS DORMA RTS 87, RTS 80EMB and RTS 80FLB Transom Closers offer the ideal solution for double action
More informationNAVSEA REVIEWED ASTM F-718. Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment)
ASTM F-718 The Sherwin-Williams Company Dura-Plate UHS Epoxy Primer PRODUCT DESIGNATIONS Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment) MIL-PRF-23236 If this product is to be applied
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
More information9008C (Slow Reducer) or 9008C2 (Reducer) or 9008C4 (Fast Reducer)
TECHNICAL DATA SHEET Product Description Desothane HD is a pigmented base coat designed for use with clear coat B0900D. The Base coat / clear coat system provides extended service life, improved buffability,
More informationNAVSEA REVIEWED ASTM F-718. SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue
ASTM F-718 The Sherwin Williams Company SeaVoyage Copper Free Antifoulant PRODUCT DESIGNATIONS SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue MIL-PRF-24647 If this product
More informationFrequently Asked Questions for Automotive Applications
Frequently Asked Questions for Automotive Applications Rust Bullet Automotive 1. What is the difference between Rust Bullet Standard formula (Gold Label) and Rust Bullet Automotive formula (Silver Label)?
More informationLR8123 Anti-Fret Primer. Corrosion inhibiting properties Rapid drying Anti-fret
Anti-Fret Primer TECHNICAL DATA SHEET Product Description Components is a two pack, anti-fret primer based on an etch primer with the addition of molybdenum disulphide. is designed to prevent fretting
More informationElectric and Pneumatic. AirTite & E-Tite
Electric and Pneumatic TORQUE WREncHES AirTite & E-Tite AirTite Pneumatic Torque Wrenches Calibrated & ready for use Powerful Compact Accurate Durable Faster Light-Weight Efficient TITAN s Patented Technology
More information3. Packages 3.1 Characteristics Model number S4 (Package) Sensing element type Target gas VH Heater Voltage Electrical characteristics PH Powe
E-MAIL: 1/7 Sensor (Carbon dioxide) for the detection of CO2 Features High selectivity to CO 2 Long-term stability Low dependency on humidity & temperature Applications Air quality control Agriculture
More informationIFO 380 HEAVY FUEL OIL Vessel using Xbee Natural Fuel Additive
CONTEXT DESCRIPTION The Brittany Ferries company wished to assess the Xbee biotechnology. The Mont St-Michel ferry was selected to be the company's laboratory ship, with several goals: Demonstrate a reduction
More informationPRODUCT AND COLOUR GUIDE
PRODUCT AND COLOUR GUIDE 76_Armstead_product guide_aw.indd 2 22/04/2016 11:4 CONTENTS Emulsions 4 Trim 8 Primers 10 Exterior 12 Floor paints 13 System guide 14 76_Armstead_product guide_aw.indd 3 22/04/2016
More informationTraining and Ongoing Support. VOC-Compliant. Exclusive Canadian Distributor of Tectyl. Truck World Canada s National Truck Show
VOC-Compliant Exclusive Canadian Distributor of Tectyl Training and Ongoing Support Truck World 2012 Canada s National Truck Show WHO WE ARE Since 1984 Corrosion Control Coatings Ltd. has been a national
More informationHEMPAXANE CLASSIC 55000
Product Data HEMPAXANE CLASSIC 55000 BASE 55009 with CURING AGENT 98000 Description: Recommended use: Service temperatures: Availability: HEMPAXANE CLASSIC 55000 is a two-component, high-solids, high-gloss,
More informationDoor Controls. Door. Controls
Door Controls Door Controls Contents ARRONE Architectural Plus High Effi ciency Door Closers 328-334 ARRONE Architectural Plus Electromagnetic Door Controls 335-337 ARRONE Door Controls 338-341 ARRONE
More informationNAVSEA REVIEWED ASTM F-718. Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer
ASTM F-718 International Paint LLC Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer PRODUCT DESIGNATIONS Part A: KRA922/KRA924/KRA925/KRA92 Part B: KRA923 MIL-PRF-24667 If this product
More informationPROTEGOL Coating Systems
PROTEGOL Coating We Protect Assets Protection PROTEGOL Coating We Protect Assets PROTEGOL Coating is a brand of TIB Chemicals AG. Since the 1960 s we have been dedicated to delivering innovative coatings
More informationstationary gas engine oils high performance, high efficiency lubricants for stationary gas engines
stationary gas engine oils high performance, high efficiency lubricants for stationary gas engines Q8 Mahler Productivity and Reli 20 18 16 Oxidation Control The thin oil film separating the liner from
More informationExperience the Heri Difference
Experience the Heri Difference Thinking Green Heri Automotive is committed to bringing our industry into 21st century environmental practices. By continuing to seek out and deploy environmentally friendly
More informationSPECIAL TOOLS BULLETIN
SPECIAL TOOLS BULLETIN Title: "LEAK MASTER" EVAP SYSTEM "SMOKE" MACHINE Supersedes the April 15, 2004 edition Car Market: NORTH AMERICA : 1 of 5 YEAR MONTH DAY 2004 06 18 INTRODUCING THE LEAKMASTER J-45500-A!
More informationSULLAIR Oil Free Rotary Screw Air Compressors
SULLAIR Oil Free Rotary Screw Air Compressors 100 350 hp 75 261 kw sullair an industry leader Leadership Since 1965, Sullair has been recognized worldwide as an innovator and leader in rotary screw compression
More informationSweeper Range. Worldwide
Sweeper Range Worldwide About Johnston Founded in 1904, Johnston Sweepers is one of the world leading manufacturers of outdoor surface cleansing equipment with machines operating in over 80 countries worldwide.
More informationNAVSEA REVIEWED ASTM F-718. Chesterton ARC 855N, Ceramic Filled Epoxy Coating
ASTM F-718 ARC Composite Technology Chesterton ARC 855N, Ceramic Filled Epoxy Coating MIL-PRF-32171 If this product is to be applied as part of a coating system, all components of the system must be as
More informationUser Manual. (English)
User Manual (English) www.cleanhandle.se Clean Handle is a door handle sanitizer designed to minimise spread of harmful germs in public environments. Contents 1. Installation 2. Inserting batteries 3.
More informationPPG Tank Linings. Tank Storage Solutions Guide
PPG Tank Linings Tank Storage Solutions Guide Reliable Solutions for the Petrochemical Industry PPG is dedicated to the development, manufacture and supply of coatings to meet the challenging needs of
More informationCustom welded sections can be sourced within New Zealand (Steltech) within 4 to 6 weeks of order.
MATERIALS Steel Availability in New Zealand Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 28 th November 2007 Ref.: MAT1003 Key Words steel availability, procurement Introduction
More information- + Some things work better together... INTRODUCING ADL SPECIFICATION BUNDLES
- + Some things work better together... INTRODUCING ADL SPECIFICATION BUNDLES Fish & Chips, Park & Ride, Gin & Tonic We all know some things that just work better together. In bus specification, there
More informationBLUESIL RTV 3720 A & B RTV 3720 SC A & B
Moldmaking Cancels and replaces SIL 09 190 3 BLUESIL RTV 3720 A & B RTV 3720 SC A & B Description The BLUESIL RTV 3720 A&B is a two component silicone elastomer which cures at room temperature by a polyaddition
More informationMIXPAC TM Technical Services Your partner for successful solutions. Sulzer Chemtech
MIXPAC TM Technical Services Your partner for successful solutions Sulzer Chemtech Turning ideas into products efficiently Technical Services to help you move forward The success of your single or multi-component
More informationPRODUCT DATA SHEET SikaCor HM Mastic
PRODUCT DATA SHEET Adhesion layer epoxy based PRODUCT DESCRIPTION USES PROPERTIES SikaCor HM Mastic is a total solid 2pack coating system based on epoxy resin. Solvent free referring to Protective Coatings
More informationProduct Catalogue 2017
Product Catalogue 2017 About VIVILITE specialise in supplying commercial LED lighting to the trade. We have our headquarters based in Jersey and distribution centres in the UK and China. Having been involved
More informationRexnord Tollok Locking Assemblies
Tollok Catalog Download the most up-to-date version at www.rexnord.com/documentation Rexnord Tollok Locking Assemblies Why Choose Rexnord Tollok Locking Assemblies? Why Choose Rexnord? When it comes to
More informationPPI NBR: H-B (REV 01) DATE: November 30, 2010
PPI NBR: 63101-015H-B (REV 01) DATE: November 30, 2010 PRESERVATION PROCESS INSTRUCTION (PPI) for UNDERWATER HULL to be used in conjunction with CORE PPI 63101-000 with a Cleanliness Level of SSPC-SP-12
More informationVSG Series Features Descriptions VSG VSG VSG Descriptions Supply valve Descriptions Vacuum filter
Basic performance oriented general vacuum ejector unit Series Nozzle diameter: ø.5, ø, ø1. acuum switch and vacuum break valve, etc. are unitized, so types matching the work purpose is selectable. Features
More informationTechnical Support Guide for High Performance Coatings Carboline Company
Technical Support Guide for High Performance Coatings Carboline Company 350 Hanley Industrial Court St. Louis, MO 63144 800-848-4645 www.carboline.com INDEX Page How to Specify Blasting 1 Abrasive/Profile
More informationNAVSEA REVIEWED ASTM F-718. Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White / MS203R Yellow / MS218H Part B
ASTM F-718 ITW Engineered Polymers, American Safety Technologies (AST) MS-200 Acrylic Epoxy Color Topping PRODUCT DESIGNATIONS Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White
More informationLED WORK LAMPS HIGH PERFORMANCE. September 2015 WHY DURITE LED WORK LAMPS?
September 2015 WORK LAMPS HIGH PERFORMANCE WHY DURITE WORK LAMPS? 3-YEAR WARRANTY ON WORK LAMPS WEATHERPROOF AND ROBUST HOUSING AND LENS FLOOD OR SPOT BEAM PATTERN? lood - Wide light pattern over an area
More informationResponsibility & Care. The leading safety products MANUFACTURER & EXPORTER with 30 years of service excellence
The leading safety products MANUFACTURER & EXPORTER with 30 years of service excellence Company Milestones 1983 1983 1989 2003 2005 2006 2008 2010 2010 2010 2010 2011 2011 2012 2013 2013 2013 2013 Incorporated
More informationRecommended Applications AV equipment, Wireless communication equipment and various types of general electronic equipment.
4. High Power Type PF, PE, PC, PA, PB, LC, LA Features Low DCR and large current capability, suitable for power circuitry. Wire wound, resin molded chip inductor. (PC, PA, PB, LC, LA type) Unique Ceramic
More informationTECHNICAL DATA SHEET CA8000. Desothane HS CA8000 Polyurethane Topcoat (EMEA) Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HS is a low VOC, polyurethane topcoat used to provide protection and decoration to aircraft exterior surfaces. topcoat is designed to be applied over
More informationZERUST FLANGE SAVER. ZERUST VCI TECHNOLOGY PROTECT FLANGE ASSEMBLIES WITH A CORROSION INHIBITING WRAP
ZERUST FLANGE SAVER PROTECT FLANGE ASSEMBLIES WITH A CORROSION INHIBITING WRAP ZERUST VCI TECHNOLOGY Zerust Flange Saver @FPSO OFFSHORE - PETROBRAS Zerust Flange Saver @FPSO OFFSHORE - PETROBRAS Zerust
More informationSupply+ are the leading supplier of specialist products.
Supply+ are the leading supplier of specialist products. Our AS Fire & Safety, Bayley, Collins Youldon and Todd Research products are collectively associated with both quality and longevity. About Supply+
More informationOrder line : Tech. line : Fax : For more information :
Heated equipment Fluid-technic Programmable temperature tester Tensility tester Circuit-board plotter Board plotter tester 3D Printer Water spray tester Programmable salt spray tester KOSO is synonym of
More informationMasterProtect 1870 / 1880
DESCRIPTION is a polysulfide based, chemical resistant two-component coating material for the systems MasterProtect 7800 and. FIELD OF APPLICATION is used as the impervious coating on MasterProtect 1860
More informationAs a high performance anti-graffiti clear-coat or top-coat, as needed over any properly substrate where:
AG800 ANTI-GRAFFITI CLEAR NORTHSTAR Superior Performance Transportation Anti-Graffiti Clear Coat Description: AG800 is a premium, high solids clear coat that offers outstanding chemical resistance, gloss
More informationAustralian owned and manufactured. Australian Made and Manufactured
Australian owned and manufactured Australian Made and Manufactured CRANE DECKS CRANE DECKS Loading Platforms for Construction projects Australia Wide If you need a materials handling solution for your
More informationApV VAlVe s As e pti c s i n g le s eat VAlVe
DELTA MS4/MSP4 Aseptic Single Seat Valve APV valves SPX is highly coitted to delivering sustainable solutions, which exceed customer expectations in value and return through a focus on. Waste prevention
More informationAir-Operated Double-Diaphragm. High Purity PTFE Pumps
Air-Operated Double-Diaphragm High Purity PTFE Pumps ULTRA High-Purity Series Ultra-High Purity Series was designed specifically for the Semiconductor Yamada s advantages come from years process of experience
More informationAN-8 Plus Air Spray Gun Solvent-Based to Waterborne Conversion Kit
Instruction Sheet P/N 10874C AN-8 Plus Air Spray Gun Solvent-Based to Waterborne Conversion Kit 1. Description Use the solvent-based to waterborne conversion kit to convert your Nordson AN-8 Plus Air Spray
More informationCorus Tubes. Celsius. 355 Technical Guide. Structural Hollow Sections
Corus Tubes Celsius 355 Technical Guide Structural Hollow Sections Contents 01 Introduction 02 Technical data 06 Production range charts 08 Sectional Properties Celsius 355 Circular 10 Sectional Properties
More information