Bucket Capacity : m 3. Engine Power : 213 kw / 2,100 min -1. Operating Weight : 36,300-39,300 kg SK350LC-10/SK350NLC-10
|
|
- Harvey Woods
- 6 years ago
- Views:
Transcription
1 /-0 ucket Capacity :. -.8 m Engine Power : kw /,00 min - Operating Weight : 6,00-9,00 Note: This catalog may contain attachments and optional equipment that are not available in your area. nd it may contain photographs of machines with specifications that differ from those of machines sold in your areas. Please consult your nearest KOELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. -, Kitashinagawa -chome, Shinagawa-ku, Tokyo -866 JPN Tel: +8 (0) Fax: +8 (0) Inquiries To: ulletin No. /-0 -EU N
2 Power Meets Efficiency 0% Higher fuel efficiency means Efficiency Increase in productivity means Power Compared to S-mode on the -9 To urban centers, and to mines around the world. Kobelco s all-out innovation brings you durable earth-friendly construction machinery that s equal to any task, at sites all over the planet. Increased power and even greater fuel economy bring higher efficiency to any project. Kobelco machines are also more durable than ever, able to withstand the rigors of the toughest job sites. It all adds up to new levels of value that are a step ahead of the times. lso, this machine conforms to Stage IV Exhaust Emission Standards, thanks to its significantly reduced NOx* emissions. While focusing on the global environment of the future, Kobelco offers next-generation productivity to meet the need for lower life cycle costs and exceed the expectations of customers the world over. * NOx: Nitrogen Oxide
3 Evolution Continues, with Improved Fuel Efficiency. 0% Higher fuel efficiency means Efficiency The new arm interflow system more efficiently controls hydraulic fluid flow, and significant reduction of in-line resistance and pressure loss boosts fuel efficiency by about 0%*. The engine, already well-known for its environmental performance has a new SCR* system, and its reduced NOx emissions means the engine now meets Stage IV Standards. *. Compared to S-mode on the -9 *. SCR: Selective Catalytic Reduction Hydraulic System: Revolutionary Technology Saves Fuel rm Interflow System When lowering the boom, this system uses the downward force generated by the boom s weight to push fluid to the shovel arm. This greatly reduces the need to apply power from outside the system. Hydraulic circuit reduces energy loss We have made every effort to enhance fuel efficiency by minimizing hydraulic pressure resistance, improving the hydraulic line layout to control friction resistance loss and minimizing valve resistance. Improved hydraulic piping is an effective means of reducing pressure loss. oom weight The boom weight Hydraulic fluid pushed rm cylinder puts force on the from the boom cylinder contracts boom cylinder goes to the arm cylinder In Pursuit of Improved Fuel Efficiency Operation Mode Fuel consumption is lower in ECO-mode/S-mode in comparison with the previous model (Generation 9). Compared to previous models ECO-mode S-mode bout 9% improvement bout 0% improvement rm opens lways and Forever. Yesterday, Today, and Tomorrow. We're Obsessed with Fuel Efficiency. Over the past 0 years, KOELCO has achieved an average fuel consumption reduction of 7% across its fleet. We vow to lead the industry in improving fuel efficiency. Compared to -6 model (006) Larger hydraulic piping Smoother hydraulic piping Low-resistance connections ECO-mode (-0) bout 7% improvement Engine rpm sec Pull up safety lock lever Engine deceleration larm sec IS (uto Idle Stop) Engine stops 60 sec Elapsed time If the boarding/disembarking lever is left up, the engine will stop automatically. This eliminates wasteful idling during standby, saving fuel and reducing CO emissions as well. Engine Meets Stage IV Standards Reduces Fuel Consumption and Minimizes Exhaust Emissions Hino engines are renowned for fuel efficiency and environmental performance, and Kobelco has tuned these powerplants especially for construction machinery. The pressure within the common rail fuel injection system, the VG turbo, and the exhaust gas after-treatment system reduce exhaust PM* while the large-capacity EGR cooler sharply reduces the formation of NOx gases. * PM: Particulate Matter VG Turbo Reduces PM The variable-geometry turbocharger adjusts air intake to maximize combustion efficiency. t low engine speeds the nozzles are closed, the turbo speed increased and air intake is boosted. This helps lower fuel consumption. Variable nozzle t low-speed t high-speed SCR System with DEF/Urea The engine exhaust system has an SCR system that converts NOx emissions into harmless nitrogen and water. Combining this with a post-exhaust gas treatment system that captures and disposes of PM, the SK60LC has a much cleaner exhaust that meets Stage IV exhaust emission standards. NOx reduction rate (Compared to previous models) bout 80% decrease EGR Cooler Reduces NOx Cooled exhaust gases from the EGR cooler are mixed with fresh air in the intake. The recirculated air lowers the combustion temperature which reduces NOx. SCR catalyst EGR valve ir intake NOx Water-cooled EGR Exhaust
4 More Power and Higher Efficiency. The highly efficient hydraulic system Improved fuel efficiency contributes to high performance Get More Done Faster with Superior Operability minimizes fuel consumption while maximizing power. With nimble movement and ample digging power, this excavator promises to improve your job productivity. Superior Digging Volume This excavator offers dynamic digging force even as it minimizes fuel consumption rates, achieving class-leading work volume. H-mode with an increased torque setting delivers about % greater digging volume. Digging volume/hour (Compared to H-mode on previous models) bout % increase Max. ucket Digging Force Normal: kn With power boost: kn Max. rm Crowding Force Normal: 6kN With power boost: 80kN Top-class excavating reach extends working range Max. digging reach,60mm Max. digging depth 7,60mm Max. vertical wall digging depth 6,60mm *Values are for HD arm (.0m) Piping for Quick Hitch quick hitch hydraulic line, which speeds up attachment changes, is available as a standard. Light Touch on the Lever Means Smoother, Less Tiring Work It takes % less effort to work the operation lever, which reduces fatigue over long working hours or continued operations. *Values are for HD arm (.0m) Top Class Traveling Force Powerful traveling force and pulling force deliver plenty of speed when climbing slopes or negotiating bad roads, and the agility to change direction swiftly and smoothly. Drawbar Pulling Force: kn Operator-friendly Features Include Controls that re Easy to See, Easy to Use Multi-Display in Color rilliant colors and graphic displays are easy to recognize on the LCD multi-display in the console. The display shows fuel consumption, maintenance intervals, and more. nalog gauge provides an intuitive reading of fuel level and engine water temperature Green indicator light shows low fuel consumption during operation PM accumulation display (left)/urea level gauge (right) Fuel consumption/switch indicator for rear camera images Digging mode switch 6 Monitor display switch PM accumulation/ Urea accumulation display reaker mode Fuel consumption Nibbler mode Maintenance Rearview monitoring 6 One-Touch ttachment Mode Switch simple flick of a switch converts the hydraulic circuit and flow amount to match attachment changes. Icons help the operator to confirm the proper configuration at a glance. 6
5 Increased Power, with Enhanced Durability to Maintain the Machine's Value Increase in productivity means Power Structural design increases strength, while eliminating hydraulic problems. Enhanced durability takes productivity to a new level. uilt to Operate in Tough Working Environments Improved Filtration System Reliability The attachment has been reinforced to handle a higher work volume, with greater power and excellent durability that can withstand demanding work conditions. Clean, contaminant-free fuel and hydraulic fluid are essential to stable performance. The improved filtration systems reduce the risk of mechanical trouble and enhance longevity and durability. Enlarged Reinforcement of the rm Foot HD: ase plate thickness has been increased. times. Current New Hydraulic Fluid Filter Recognized as the best in the industry, our super-fine filter separates out even the smallest particles. New cover prevents contamination when changing filters. Hydraulic Fluid Filter Clog Detector Pressure sensors at the inlet and outlet of the hydraulic fluid filter monitor differences in pressure to determine the degree of clogging If the difference in pressure exceeds a predetermined level, a warning appears on the multi-display, so any contamination can be removed from the filter before it reaches the hydraulic fluid reservoir. Pressure detection system Hydraulic fluid filter Pressure detection system Hydraulic fluid reservoir Modified Foot oss Shape The arm foot boss shape has been modified and improved to distribute stress, delivering.6 times more strength for tasks like digging next to a wall. Current New Double-Element ir Cleaner The large-capacity element features a double-filter structure that keeps the engine running clean even in industrial environments. Fuel Filter The pre-filter, with built-in water separator maximizes filtering performance. Engine Return Main filter larger-size Pre-filter Fuel tank 7 8
6 Comfortable Cab Is Now Safer than Ever. work environment that is quieter Comfort and more comfortable. cab that puts the operator first is key to Super-irtight Cab ir Conditioner Register behind the Seat More Comfortable Seat Means Higher Productivity improved safety. The high level of air-tightness keeps dust out of the cab. Quiet Inside The high level of air-tightness ensures a quiet, comfortable cabin interior. The large air-conditioner has registers on the back pillars that blow from behind and to the right and left of the operator s seat. They can be adjusted to put a direct flow of cool/warm air on the operator, which means a more comfortable operating environment. Seat suspension absorbs vibration Seat recliner can be pushed back flat Double slides allow adjustment for optimum comfort Interior Equipment dds to Comfort and Convenience Low Vibration Coil springs absorb small vibrations, and high suspension mounts filled with silicone oil reduce heavy vibration. The long stroke achieved by this system provides excellent protection from vibration. utomatic M/FM radio US pin/v power outlet Twice the stroke of a conventional mount Coil spring Silicone oil Large Cab Is Easy to Get in and out of The expanded cab provides plenty of room for a large door, more headroom and smoother entry and exit. Spacious storage tray Large cup holder Safety ROPS Cab ROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-7-: 008) and ensures greater safety for the operator should the machine tip over. road View Liberates the Operator The front window features one large piece of glass without a center pillar on the right side for a wide, unobstructed view. Expanded Field of View for Greater Safety TOP Guard is fitted as standard. Rear View Camera Right side View Camera Right Side Camera Fitted as Standard Further to the existing rear-view camera, a camera for the right side is fitted as standard for easy safety checks all round the machine. Rear view Rear view shows the area directly behind the cab. Hammer for emergency exit 9 0
7 GPS Operating Hours comparison of operating times of machines at multiple locations shows which locations are busier and more profitable. Operating hours on site can be accurately recorded, for running time calculations needed for rental machines, etc. Fuel Consumption Data Data on fuel consumption and idling times can be used to indicate improvements in fuel consumption. Graph of Work Content The graph shows how working hours are divided among different operating categories, including digging, idling, traveling and optional operations. ase station Digging Hrs Trveling Hrs Idle Hrs Opt tt Hrs Cane Mode Hrs ve,fuel Consumption Hydraulic excavator Daily report Fuel consumption Work status Web server Maintenance Data and Warning lerts Machine Maintenance Data Provides maintenance status of separate machines operating at multiple sites. Maintenance data is also relayed to KOELCO service personnel, for more efficient planning of periodic servicing. Warning lerts This system warns an alert if an anomaly is sensed, preventing damage that could result in machine downtime. KOELCO service personnel/dealer/customer Maintenance Customer KOELCO office KOELCO service personnel Remote Monitoring for Peace of Mind KOMEXS (Kobelco Monitoring Excavator System) uses satellite communication and internet to relay data, and therefore can be deployed in areas where other forms of communication are difficult. When a hydraulic excavator is fitted with this system, data on the machine s operation, such as operating hours, location, fuel consumption, and maintenance status can be obtained remotely. larm Information Can e Received through larm information or maintenance notice can be received through , using a computer or cell phone. Daily/Monthly Reports Operational data downloaded onto a computer helps in formulating daily and monthly reports. Direct ccess to Operational Status larm messages can be received on mobile device. Location Data ccurate location data can be obtained even from sites where communications are difficult. Security System Engine Start larm The system can be set an alarm if the machine is operated outside designated time. rea larm It can be set an alarm if the machine is moved out of its designated area to another location. Latest location Location records Work data Engine start alarm outside prescribed work time larm for outside of reset area
8 Efficient Maintenance Keeps the Machine in Peak Operating Condition. Machine Information Display Function Examples of displaying maintenance information Displays only the maintenance information that s needed, when it s needed Self-diagnostic function provides early-warning detection and display of electrical system malfunctions Service-diagnostic function makes it easier to check the status of the machine Record function of previous breakdowns including irregular and transient malfunction Easy, On-the-Spot Maintenance There is ample space in the engine compartment for a mechanic to do maintenance work inside. The distance between steps is lower so entry and exit is easier. nd the mechanic can work in comfort, without contortions or unnatural body positions. Finally, the hood is lighter and easier to raise and lower. More Efficient Maintenance Inside the Cab Easy-access fuse box ir conditioner filters DPF reactivation switch Generous space for maintenance work Step/Hand rail DEF/Urea tank Positioned where the step opens Maintenance Work, Daily Checks, Etc., Can e Done from Ground Level The layout allows for easy access from the ground for many daily checks and regular maintenance tasks. Double-element air cleaner Easy Cleaning More finely differentiated fuses make it easier to locate malfunctions. Internal and external air conditioner filters can be easily removed without tools for cleaning. If the monitor warning goes off, the filter should be reactivated manually using a switch. Crawler frame Detachable two-piece floor mat Engine oil pan Special crawler frame design is easily cleaned of mud. Detachable two-piece floor mat with handles for easy removal. floor drain is located under floor mat. Engine oil pan equipped with drain valve. Fuel filter/pre-filter Fuel filter Pre-filter Engine oil filter Right side Engine oil filter Left side Laid out for easy access to radiator and cooling system elements Refueling pump Long-life hydraulic oil:,000 hours Long-Interval Maintenance Long-life hydraulic oil reduces cost and labor. Replacement cycle:,000 hours Highly Durable Super-fine Filter The high-capacity hydraulic oil filter incorporates glass fiber with superior cleaning power and durability.
9 Specifications -0-0 Type Engine Model No. of cylinders ore and stroke Displacement Rated power output Max. torque HINO JO8EVV-KSDK Direct injection, water-cooled, -cycle diesel engine with turbocharger, intercooler 6 mm x 0 mm 7.68 L 0 kw/,00 min - (ISO 99) kw/,00 min - (ISO 96) 988 N m/,600 min - (ISO 99),07 N m/,600 min - (ISO 96) Cab oom cylinders rm cylinder ucket cylinder Refilling Capacities & Lubrications Fuel tank Cooling system Engine oil Travel reduction gear Swing reduction gear Hydraulic oil tank DEF/Urea tank Cab & Control oom, rm & ucket 0 mm x,0 mm 70 mm x,788 mm 0 mm x,9 mm 0 L L 8. L x 8.0 L 7. L L tank oil level 0 L hydraulic system 8 L rm length Working Ranges Unit: m oom 6. m rm Short Standard Long Range.6 m. m. m a- Max. digging reach b- Max. digging reach at ground level c- Max. digging depth d- Max. digging height e- Max. dumping clearance f- Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius i- Horizontal digging stroke at ground level j- Digging depth for. m (8') flat bottom ucket capacity ISO heaped m ll-weather, sound-suppressed steel cab mounted on the high suspension Hydraulic System mounts filled with silicone oil and equipped with a heavy, insulated floor mat Control.6 Pump Two hand levers and two foot pedals for travel Two variable displacement pumps + Two hand levers for excavating and swing Type Digging Force (ISO 60) one gear pump Electric rotary-type engine throttle Short Max. discharge flow x 9 L/min, x L/min Noise levels rm length.6 m Relief valve setting External 0d() (ISO 69) ucket digging force Operator 69d() (ISO 696) * rm crowding force oom, arm and bucket Power oost Travel circuit Swing circuit Control circuit Pilot control pump Main control valve Oil cooler Swing motor rake Parking brake Swing System Swing speed Swing torque Tail swing radius Min. front swing radius. MPa {0 f/cm } 7.8 MPa {8 f/cm }. MPa {0 f/cm } 9.0 MPa {96 f/cm }.0 MPa {0 f/cm } Gear type 8-spool ir cooled type xial piston motor Hydraulic; locking automatically when the swing control lever is in neutral position Oil disc brake, hydraulic operated automatically 0.0 min - {rpm} 9.6 kn m,600 mm,0 mm Travel System Travel motors Travel brakes Parking brakes Travel shoes Travel speed Drawbar pulling force Gradeability x axial-piston, two-step motors Hydraulic brake per motor Oil disc brake per motor 8 each side.6/. km/h kn (ISO 76) 70 % { } Dimensions Overall length Overall height (to top of boom) C Overall width of crawler D E F G Overall height (to top of cab) Ground clearance of rear end* Ground clearance* Tail swing radius * Short.6 m,80, Standard. m * 6 80* Unit: kn Long. m * 0 * *Power oost engaged. Standard. m,00,0,90,990,00,90 00, Long. m,0,90 G,G G' H I J K L d c e Distance from center of swing to rear end Tumbler distance Overall length of crawler Track gauge j f g m Short rm Standard rm Long rm Shoe width Overall width of upperstructure D L a b i h m m Unit: mm,600,00,960,90,90 600,980 *Without including height of shoe ttachments H E K J F ackhoe bucket and combination I C Use ucket capacity ISO heaped m Struck m Opening width With side cutter mm Without side cutter mm No. of teeth ucket weight.6 m short arm Combination. m standard arm. m long arm Standard Recommended Loading only Not recommended. 0.8,0,0 90 ackhoe bucket Normal digging..0,0,00,070.6.,70,0,00 Light-duty.8.,680,00 Operating Weight & Ground Pressure In standard trim, with standard boom,. m arm, and. m ISO heaped bucket Shaped Double grouser shoes Triple grouser shoes (even height) Shoe width mm Overall width of crawler mm,90,90,90,90 mm,990,990,090 Ground pressure kpa kpa Operating weight 6,00 6,00 7,00 7,600 6,00 6,00 7,00 900,90 7 8,000 6
10 Lifting Capacities -0-0 Rating over front Rating over side or 60 degrees : Reach from swing centerline to arm top : rm top height above/below ground C: Lifting capacities in Kilograms ucket: Without bucket Relief valve setting: 7.8 MPa (8 f/cm ) 9.0 m oom: 6. m rm:. m, ucket: without Shoe: 600 mm (Heavy Lift). m.0 m. m 6.0 m 7. m 9.0 m t Max. Reach *6,70 *6, m 9.0 m oom: 6. m rm:. m, ucket: without Shoe: 600 mm (Heavy Lift). m.0 m. m 6.0 m 7. m 9.0 m t Max. Reach *6,70 *6, m 7. m *7,80 *7,80 *,80 *, m 7. m *7,80 7,00 *,80 *, m 6.0 m *7,90 *7,90 *,60 *, m 6.0 m *7,90 7,00 *,60 *, m. m *9,70 *9,70 *8,90 7,700 *7,80,70 *,60,80 9. m. m *9,70 *9,70 *8,90 7,0 *7,80,0 *,60, m.0 m *,090 *,090 *,60 0,60 *9,0 7,60 *8,60,600 *,80,0 9. m.0 m *,090,00 *,60 9,60 *9,0 6,800 *8,60,70 *,80,70 9. m. m *7,00,0 *,0 9,80 *9,90 7,00 8,00,0 *6,00, m. m *7,00,960 *,0 8,800 *9,90 6,90 8,70,00 *6,00,90 9. m *8,060,770 *,70 9,00 *0,00 6,80 8,70,0 *6,80, m *8,060,00 *,70 8,0 *0,00 6,60 8,0,890 *6,80, m -. m *,90 *,90 *7,700,670 *,0 9,00 *0,0 6,700 *7,890,0 8.8 m -. m *,90 *,90 *7,700,00 *,0 8,70 *0,0 6,0 *7,890, m -.0 m *7,0 *7,0 *,80 *,80 *6,80,80 *,90 9,080 *9,690 6,70 *8,60 6, m -.0 m *7,0 *7,0 *,80 *,80 *6,80,0 *,90 8,0 *9,690 6,00 *8,60, m -. m *8,00 *8,00 *,800 *,800 *0,90 9,0 *8,0 7, m -. m *8,00 *8,00 *,800,880 *0,90 8,60 *8,0 7, m 9.0 m oom: 6. m rm:. m, ucket: without Shoe: 600 mm (Heavy Lift). m.0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,080 *,080 *,770 *, m 9.0 m oom: 6. m rm:. m, ucket: without Shoe: 600 mm (Heavy Lift). m.0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,080 *,080 *,770 *, m 7. m *,60 *, m 7. m *,60 *, m 6.0 m *6,890 *6,890 *6,80,90 *,0 *,0 9.9 m 6.0 m *6,890 *6,890 *6,80,70 *,0 *,0 9.9 m. m *7,0 *7,0 *6,990,760 *,80 *, m. m *7,0 7,0 *6,990,0 *,80 *, m.0 m *,60 *,60 *,00 *,00 *9,90 *9,90 *8,0 7,80 *7,0,0 *,0,80 0. m.0 m *,60 *,60 *,00 *,00 *9,90 9,0 *8,0 6,80 *7,0,0 *,0,0 0. m. m *,760,00 *,0 9,60 *9,90 6,990 *7,880,0 *,80,0 0. m. m *,760,90 *,0 8,80 *9,90 6,0 *7,880,900 *,80, m *0,80 *0,80 *7,90,670 *,70 9,00 *9,80 6,670 8,0,0 *,80, m *0,80 *0,80 *7,90,90 *,70 8,0 *9,80 6,0 8,00,70 *,80, m -. m *0,80 *0,80 *,90 *,90 *7,60,0 *,90 8,80 *0,0 6,80 8,00,00 *6,00, m -. m *0,80 *0,80 *,90 *,90 *7,60,070 *,90 8,00 *0,0,90 7,990,60 *6,00,0 9.6 m -.0 m *,870 *,870 *0,00 *0,00 *6,90,0 *,670 8,70 *9,90 6,0 *7,0,0 8.9 m -.0 m *,870 *,870 *0,00 *0,00 *6,90,060 *,670 7,970 *9,90,890 *7,0, m -. m *0,0 *0,0 *,70 *,70 *,90,70 *,90 8,870 *8,70 6,70 *8,060 6,0 7.8 m -. m *0,0 *0,0 *,70 *,70 *,90,90 *,90 8,00 *8,70 6,00 *8,060, m -6.0 m *,790 *,790 *,70 *,70 *8,0 *8,0 *7,90 *7, m -6.0 m *,790 *,790 *,70 *,70 *8,0 *8,0 *7,90 *7, m 7. m 6.0 m. m.0 m. m -. m -.0 m -. m oom: 6. m rm:.6 m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m t Max. Reach *9,80 *9,80 *,70 *,70 *,60 *,60 *7,80,60 *6,90,660 *,0,900 *,70 *,70 *9,60 *9,60 *0,70 *0,70 *,770 9,860 *,800 9,0 *,0 9,070 *,90 9,000 *,70 9,0 *8,60 7,70 *9,00 7,0 *9,60 7,00 *0,00 6,90 *0,60 6,70 *0,70 6,700 *8,760 8,60 *8,0 8,90 *8,0 6,060 *8,600,60 8,80,60 8,70,90 *9,090 6,00 *9,0 7,0 *8,90 *8, m 8.00 m 8.8 m 8.87 m 8.89 m 8.66 m 8. m 7.9 m.9 m 7. m 6.0 m. m.0 m. m -. m -.0 m -. m oom: 6. m rm:.6 m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m t Max. Reach *9,80 *9,80 *,70 *,70 *,60 *,60 *7,80,0 *6,90,90 *,0,60 *,70 *,70 *9,60 *9,60 *0,70 9,700 *,770 9,070 *,800 8,70 *,0 8,90 *,90 8,0 *,70 8,70 *8,60 7,90 *9,00 6,90 *9,60 6,60 *0,00 6,60 *0,60 6,90 *0,70 6,60 *8,760 8,00 *8,0 6,0 *8,0,600 *8,600,80 8,0,00 8,690,0 *9,090,70 *9,0 6,0 *8,90 *8, m 8.00 m 8.8 m 8.87 m 8.89 m 8.66 m 8. m 7.9 m.9 m Notes:. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.. rm top defined as lift point.. The above lifting capacities are in compliance with ISO 067. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOELCO CONSTRUCTION MCHINERY CO., LTD. 7 8
11 Lifting Capacities -0-0 Piece oom Specifications Working Ranges Unit: m oom.6 m +.6 m rm Short Standard Long Range.6 m. m. m a- Max. digging reach b- Max. digging reach at ground level c- Max. digging depth d- Max. digging height e- Max. dumping clearance f- Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius i- Horizontal digging stroke at ground level j- Digging depth for. m (8') flat bottom ucket capacity ISO heaped m Digging Force (ISO 60) rm length ucket digging force rm crowding force Dimensions Unit: kn Short Standard Long.6 m. m. m * 0 * * 6 80* * *Power oost engaged. Operating Weight & Ground Pressure 0 * Short rm Standard rm Long rm The area marked with diagonal lines shows the warning zone of the cab protection device. D K m In standard trim, with piece boom,. m arm, and. m ISO heaped bucket Shaped Double grouser shoes Triple grouser shoes (even height) Shoe width mm Overall width of crawler mm,90,90,90,90 mm,990,990,090 Ground pressure kpa kpa Operating weight 7,600 7,600 8,00 8,900 7,600 7,600 8,00 rm length C D E F G G' H I J K L Overall length Overall height (to top of boom) Overall width of crawler Overall height (to top of cab) Ground clearance of rear end* Ground clearance* Tail swing radius Distance from center of swing to rear end Tumbler distance Overall length of crawler Track gauge Shoe width Overall width of upperstructure Short.6 m,90,0 Standard. m,70,60,90,990,00,90 00,600,600,00,960,90,90 600,980 Long. m,70,670 *Without including height of shoe d c j e g f L J C F a b i h H I m m G G 900,90 9 9,00 Unit: mm E 0. m 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m 0. m 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m -. m 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m Rating over front Rating over side or 60 degrees : Reach from swing centerline to arm top : rm top height above/below ground C: Lifting capacities in Kilograms ucket: Without bucket Relief valve setting: 7.8 MPa (8 f/cm ) oom: piece boom rm:. m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,70 *7,80 *,80 *,70 *,70 7,660 *,80 *,70 *9,80 *,880 *,800 *7,600 *8,080 *6,900 *,0 *,000 *9,80 *,880 *,800,70,060,60,60 *,000 *7,90 *,00 *,0 *,0 *,00 *,0 *,90 *,0 *9,00 Notes:. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.. rm top defined as lift point. *7,90 *,00,90 0,70 0,00 9,0 9,070 8,90 9,00 *6,790 *,780 *,090 *,970 *,0 *6,80 *8,70 *6,670 *6,790 *,780 *,090 *,970 *,0 6,70 6,60 *6,670 *6,00 *6,0 *6,0 *6,790,60,00,0,0 *8,0 *6,880 *6,000 *,700 *,60 *,690 *,90 *6,0 *6,0 *,980 oom: piece boom rm:. m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,80 *7,60 *9,090 *,70 *6,00 *,80 *7,60 *9,090 *,70 *6,00 *,80 *6,0 *7,60 *7,60 *,870 *,080 *8,90 *,80,760,0,90,00 *,080 *8,90 *6,0 *8,60 *8,600 *9,90 *,70 *,0 *,90 *,90 *,00 *0,90 *7,80 *6,0 *8,60 *8,600 *9,90 0,960 0,90 9,70 8,960 8,700 8,660 *7,80 *6,60 *,70 *9,070 *9,70 *9,90 *,80 *,90 *6,80 *7,90 *,900 *6,60 *,70 7,990 7,670 7,60 *,80 *,90 6,90 6,70 *,900 *,00 *,880 *,80 *,0 *,80 *6,60 *,60 *,00 *,880 *,80 *,0,060,980,00 oom: piece boom rm:.6 m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m t Max. Reach *7,0 *8,70 *,0 *7,960 *,80 *,790 *7,0 *8,70 *,0 *7,960 *,80 *,790 *,00 *,00 *,00 *6,70 *7,80 *7,980 *,0 *,0 *8,0 *,00 *,00 *,00,980,80,90,0 *,0 *8,0 *7,0 *,00 *,700 *,60 *,0 *7,760 *0,0 *7,70 *7,0 0,970 0,80 9,70 9,0 *7,760 8,90 *7,70 *7,80 *6,0 *6,0 *7,00 *8,60 *8,00 *7,80 *6,0 *6,0 6,80 6,660 6,660 *,90 *0,80 *9,70 *9,00 *8,0 *8,00 *7,70 *6,60 *,60 *,90 8,90 6,690,870,60,0,80,980 *,60 *,800 *,90 *,0 *,60 *,0 *,00 *,600 *,90 *,0 *,080 *,60.68 m 7. m 8.08 m 8.6 m 8.9 m 8.97 m 8.7 m 8. m 7.8 m *8,0 *6,880 *6,000 *,700,70,90,80,90,00 *,980 *,800 *,90 *,0 *,60 *,0,70,70,0,80,00 *,60.6 m 6.70 m 7.9 m 8.8 m 9. m 9.6 m 9.6 m 9. m 8.96 m 8.9 m 6.06 m 7.7 m 8.88 m 9.6 m 0. m 0.7 m 0.9 m 0.0 m 9.77 m 9.07 m 8.0 m. The above lifting capacities are in compliance with ISO 067. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOELCO CONSTRUCTION MCHINERY CO., LTD. 9 0
12 Lifting Capacities m 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m 0. m 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m -. m Rating over front Rating over side or 60 degrees : Reach from swing centerline to arm top : rm top height above/below ground C: Lifting capacities in Kilograms ucket: Without bucket Relief valve setting: 7.8 MPa (8 f/cm ) oom: piece boom rm:. m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,70 *7,80 *,80 *,70 *,70,0 *,80 *,70 *9,80 *,880 *,800 *7,600 *8,080 *6,900 *,0 *,000 *9,80 *,880,0,80,760,0,70 *,000 *7,90 *,00 *,0 *,0 *,00 *,0 *,90 *,0 *9,00 *7,90 0,790 0,60 9,890 9,0 8,60 8,90 8,60 8,0 *6,790 *,780 *,090 *,970 *,0 *6,80 *8,70 *6,670 *6,790 *,780 *,090 *,970 *,0 6,0 6,070 6,60 *6,00 *6,0 *6,0 *6,790,0,060,90,80 *8,0 *6,880 *6,000 *,700 *,60 *,690 *,90 *6,0 *6,0 *,980 oom: piece boom rm:. m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m 9.0 m t Max. Reach *,80 *7,60 *9,090 *,70 *6,00 *,80 *7,60 *9,090 *,70 *6,00 *,80 *6,0 *7,60 *7,60 *,870 *,080 *8,90 *,80,90,990,90,90,90 *8,90 *6,0 *8,60 *8,600 *9,90 *,70 *,0 *,90 *,90 *,00 *0,90 *7,80 *6,0 *8,60 *8,600 *9,90 0,0 9,80 8,670 8,70 7,90 7,880 *7,80 *6,60 *,70 *9,070 *9,70 *9,90 *,80 *,90 *6,80 *7,90 *,900 *6,60 *,70 7,00 7,090 6,690 *,80 *,90,80,80 *,900 *,00 *,880 *,80 *,0 *,80 *6,60 *,60 *,00 *,880 *,80,790,60,0,60 *,800 *,90 *,0 *,60 *,0 *,00 *,600 *,90 *,0 *,080 *,60 *8,0 *6,880 *6,000,60,860,0,0,0,870 *,980 *,800 *,90 *,0 *,60,80,90,80,870,00,90 *,60.6 m 6.70 m 7.9 m 8.8 m 9. m 9.6 m 9.6 m 9. m 8.96 m 8.9 m 6.06 m 7.7 m 8.88 m 9.6 m 0. m 0.7 m 0.9 m 0.0 m 9.77 m 9.07 m 8.0 m STNDRD EQUIPMENT ENGINE Engine, HINO J08EVV-KSDK, diesel engine with turbocharger and intercooler utomatic engine deceleration uto Idle Stop (IS) atteries ( x V - 0h) Starting motor (V - kw), 60 amp alternator utomatic engine shut-down for low engine oil pressure Engine oil pan drain cock Double element air cleaner Refueling pump CONTROL Working mode selector (H-mode, S-mode and ECO-mode) Power oost Heavy lift Object Handling Kit (boom and arm safety valve + hook) Extra N& piping (proportional hand controlled) SWING SYSTEM & TRVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic shift down Sealed & lubricated track links Grease-type track adjusters utomatic swing brake HYDRULIC rm regeneration system uto warm up system luminum hydraulic oil cooler Hydraulic fluid filter clog detector Hydraulic pressure adjustment function for N& piping Quick hitch piping OPTIONL EQUIPMENT MIRRORS, LIGHTS & CMERS Rearview mirror Three front working lights Rear & right side cameras C & CONTROL Two control levers, pilot-operated Horn, electric Cab light (interior) Luggage tray Large cup holder Detachable two-piece floor mat Headrest Handrails I Intermittent windshield wiper with double-spray washer Skylight Tinted safety glass Pull-up type front window and removable lower front window Easy-to-read multi-display color monitor utomatic air conditioner Emergency escape hammer ir suspension seat with heater (Optional for N& piping specification) Radio, M/FM stereo with speaker US pin Top guard (ISO06 998) Remote machine monitoring system KOMEXS Tow eyes 9.0 m 7. m 6.0 m. m.0 m. m -. m -.0 m oom: piece boom rm:.6 m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m t Max. Reach *7,0 *8,70 *,0 *7,960 *,80 *,790 *7,0 *8,70 *,0,00,0 *,790 *,00 *,00 *,00 *6,70 *7,80 *7,980 *,0 *,0 *8,0 *,00 *,00 *,00,60,00,60,60,0 *8,0 *7,0 *,00 *,700 *,60 *,0 *7,760 *0,0 *7,70 *7,0 0,0 9,70 8,90 8,0 *7,760 8,60 *7,70 *7,80 *6,0 *6,0 *7,00 *8,60 *8,00 7,070 *6,0 *6,0 6,60 6,00 6,0 *,90,0 *0,80 7,670 *9,70 6,80 *9,00,0 *8,0,00 *8,00,900 *7,70,00 *6,60,90 *,60 *,60.68 m 7. m 8.08 m 8.6 m 8.9 m 8.97 m 8.7 m 8. m 7.8 m Various optional arms Wide range of shoes dditional track guide Two cab lights Extended guard rail Rain visor (may interfere with bucket action) Cab guard Travel alarm Lower under cover igger capacity P pump and steel PTO housing Notes:. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.. rm top defined as lift point.. The above lifting capacities are in compliance with ISO 067. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times. 6. Lift capacities apply to only machine as originally manufactured and normally equipped by KOELCO CONSTRUCTION MCHINERY CO., LTD.
SK210LC-10. Inquiries To:
SK210LC-10 Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of
More informationPower Meets Efficiency
Power Meets Efficiency 6% Higher fuel saving means Efficiency Increase in productivity means Power Compared to H-mode on the SK00-8 To urban centers and mines around the world. Kobelco s all-out innovation
More informationSK260LC-10/SK260NLC-10
SK60LC-0/SK60NLC-0 Note: This catalog may contain attachments and optional equipment that are not available in your area. nd it may contain photographs of machines with specifications that differ from
More informationSK300LC-10/SK300NLC-10. Bucket Capacity : m 3. Engine Power : 200 kw / 2,100 min -1. Operating Weight : 30,200-33,200 kg
SK300LC-10/SK300NLC-10 ucket Capacity : 0.60-1.40 m 3 Engine Power : 200 kw / 2,100 min -1 Operating Weight : 30,200-33,200 1 Power Meets Efficiency Higher fuel efficiency means Efficiency Increase in
More informationSK300LC-10. Inquiries To:
SK300LC-0 Note: This catalog may contain attachments and optional equipment that are not available in your area. And it may contain photographs of machines with specifications that differ from those of
More informationLifting Capacities SK210LC-10/SK210NLC-10
SK0LC-0/SK0NLC-0 Lifting Capacities SK0LC oom: piece boom rm:.9 m, ucket: without Shoe: 600 mm (Heavy Lift).0 m. m 6.0 m 7. m t Max. Reach 9.0 m. m G. L. -. m - SK0NLC 9.0 m. m G. L. -. m - *080 *080 *60
More informationBucket Capacity: 0.63 m 3. Engine Power: 100 kw/2,000 min -1. Operating Weight: 18,800 21,100 kg SK180LC-10 SK180N-10.
SK80LC-0 SK80N-0 ucket Capacity: SK80LC oom: Piece oom Long Arm:. m ucket: without Shoe: 600 mm A.5 m.0 m.5 m 6.0 m 7.5 m At Max. Reach 9.0 m kg *,80 *,80 *,0 *,0.7 m 7.5 m kg *,00 *,00 *,0 *,0 5.5 m 6.0
More informationSK210HLC/SK210HNLC-10. Bucket Capacity: m 3. Engine Power: 124 kw / 2,000 min -1. Operating Weight: 22,100-23,100 kg
/-10 ucket Capacity: 0.7-0.93 m 3 Engine Power: 124 kw / 2,000 min -1 Operating Weight: 22,100-23,100 Power Meets Efficiency In 2006, KOELCO developed the world s first hybrid machine full hydraulic excavator
More informationSK180LC-10 SK180N-10. Bucket Capacity: 0.63 m 3. Engine Power: 100 kw/2,000 min -1. Operating Weight: 18,800 21,100 kg
SK180LC-10 SK180N-10 Bucket Capacity: 0.63 m 3 Engine Power: 100 kw/2,000 min -1 Operating Weight: 18,800 21,100 kg 1 Power Meets Efficiency To urban centers, and to mines around the world. Kobelco s all-out
More informationSK180LC-10 SK180N-10. Bucket Capacity: 0.63 m 3. Engine Power: 100 kw/2,000 min -1. Operating Weight: 18,800 20,500 kg
SK180LC-10 SK180N-10 Bucket Capacity: 0.63 m 3 Engine Power: 100 kw/2,000 min -1 Operating Weight: 18,800 20,500 kg 1 Power Meets Efficiency To urban centers, and to mines around the world. Kobelco s all-out
More informationSK220XDLC-10. Bucket Capacity : m 3 (ISO heaped) Engine Power : 118KW / 2,000 min -1 (ISO 14396) Operating Weight : 22,500 kg
SK220XDLC-10 Bucket Capacity : 0.80-1.00m 3 (ISO heaped) Engine Power : 118KW / 2,000 min -1 Operating Weight : 22,500 (ISO 14396) Power Meets Efficiency In line with KOBELCO s concept of mining-friendly
More informationSK210LC-10/SK210NLC-10
SK210LC-10/SK210NLC-10 1 Power Meets Efficiency 10% Higher fuel efficiency means Efficiency Increase in productivity means Power Compared to S-mode on the SK210LC-9 To urban centers, and to mines around
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. Bucket Capacity : m 3. Engine Power : 124 kw / 2,000 min -1. Operating Weight : 22,100-23,100 kg
-0-0 /-0 ucket Capacity : STNDRD EQUIPMENT ENGINE Engine, HINO J0EUM-KSSK, diesel engine with turbocharger and intercooler utomatic engine deceleration uto Idle Stop (IS) atteries ( x V - 96h) Starting
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO J0E-TJ, diesel engine with turbocharger and intercooler Automatic engine deceleration atteries (2 x 12V - 96Ah) Starting motor (24V - kw), 60 amp alternator Automatic
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO J08E-UV, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) atteries (2 x 12V - 120Ah) Starting motor (24V - 5kW),
More informationBucket Capacity: 2.1 m 3 ISO heaped. Engine Power: 257 kw/1,850 min -1 (ISO 9249) 271 kw/1,850 min -1 (ISO 14396) Operating Weight: 48,200 kg
Hydraulic Excavators Bucket Capacity: 2.1 m 3 ISO heaped Engine Power: 257 kw/1,850 min -1 (ISO 9249) 271 kw/1,850 min -1 (ISO 14396) Operating Weight: 48,200 kg KOBELCO fuel economy just keeps getting
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. Bucket capacity: m 3. Engine power: 52.3 kw/2,100 min -1. Operating weight: 8,400 8,900 kg SK85MSR-7
SK8MSR-7 STNDRD EQUIPMENT ENGINE Engine, YNMR TNV98CT, Diesel engine with turbocharger and intercooler, EU Stage V compliant uto Idle Stop utomatic engine deceleration atteries ( x V - 7 h) Starting motor
More informationSK140SRLC-5 STANDARD EQUIPMENT ENGINE CAB & CONTROL
-5 Power Meets Efficiency With indr for even quieter operation. 1 KOELCO has made the short rear swing excavator the standard for mid-sized machines. nd with ongoing development in innovations such as
More informationLifting Capacities Rating over front
Lifting Capacities Rating over front Rating over side or 90 degrees A Reach from swing centerline for arm top Arm top height above/below ground C Lifting capacities in pounds {kilograms} * Max. discharge
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO P11C-VC, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 112Ah) Starting motor (24V - 5 kw),
More informationSK140SRLC-5 STANDARD EQUIPMENT ENGINE CAB & CONTROL
-5 Power Meets Efficiency With indr for even quieter operation. 1 KOELCO has made the short rear swing excavator the standard for mid-sized machines. nd with ongoing development in innovations such as
More informationACERA GEOSPEC SK75-8. Hydraulic Excavators STANDARD EQUIPMENT
SK75-8 ACERA GEOSPEC SK75-8 STANDARD EQUIPMENT ENGINE Engine, ISUZU 4LE2XCUA engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x12v 64 Ah) Starting
More informationSK45SRX-6/SK55SRX-6 LIFTING CAPACITIES
LIFTING CAPACITIES SK45SRX-6/SK55SRX-6 A Rating over front Rating over side or 360 degrees A: Reach from swing centerline to arm top : Arm top height above/below ground C: Lifting capacities in kilograms
More informationComplies with the EU Stage V exhaust emission regulation SK28SR-6E/SK30SR-6E/SK35SR-6E
Complies with the EU Stage V exhaust emission regulation SK28SR-6E/SK30SR-6E/SK35SR-6E Full-Size Performance, Short- Agility and Quiet Operation COMPACT YET TOUGH MINI The new KOELCO SK28SR, SK30SR and
More informationLIFTING CAPACITIES SK35SR Arm: 1.37 m, Bucket: Without Shoe: 300 mm 1.0 m 2.0 m 3.0 m 4.0 m At Max. Reach Radius 4.0 m 3.0 m 2.0 m 1.0 m G. L.
SK35SR-6 Full-Size Performance, Short-Radius Agility and Quiet Operation COMPACT YET TOUGH MINI The new KOBELCO SK35SR expand the horizons of mini excavators, and offers practical performance features
More informationSK230SRLC-5. Bucket Capacity: m 3. Engine Power: 124 kw / 2,000 min -1. Operating Weight: 23,800-24,300 kg
SK230SRLC-5 Bucket Capacity: 0.51-0.93 m 3 Engine Power: 124 kw / 2,000 min -1 Operating Weight: 23,800-24,300 Power Meets Efficiency With indr for even quieter operation. 1 KOBELCO has made the short
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. Bucket capacity: m3. Engine power: 53.7 kw/2,100 min-1. Operating weight: 7,800 9,310 kg SK75SR-7
SK7SR-7 STNDRD EQUIPMENT ENGINE Engine, YNMR TNV98CT, Diesel engine with turbocharger and intercooler, EU Stage V compliant uto Idle Stop utomatic engine deceleration atteries ( x V - 7 h) Starting motor
More informationHydraulic Excavators. Bucket Capacity: m 3 ISO heaped. Engine Power: 200 kw/2,100 min -1 (ISO 14396) Operating Weight: 36,000 kg
STANDARD EQUIPMENT ENGINE Engine, HINO J08E-UN, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Automatic engine shut-down for low engine oil pressure
More informationLifting Capacities. Bucket Capacity : 0.5 m 3 ISO heaped. Engine Power : 78.5 kw/2,000 min -1 (ISO14396) Operating Weight : 16,300 kg
Lifting Capacities ED160 Blade Runner ED160 Blade Runner A B Rating over front Rating over side or 360 degrees A Reach from swing centerline for arm top B Arm top height above/below ground C Lifting capacities
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 257 kw (349 PS)/1,850 min -1 (ISO 14396) Operating Weight: 52,300 kg. Hydraulic Excavators
STANDARD EQUIPMENT ENGINE Engine, HINO P11C-UP, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Removable clean-out screen for radiator Automatic engine
More informationFull-Size Performance, Short-Radius Agility and Quiet Operation COMPACT YET TOUGH MINI
SK55SRX-6 Full-Size Performance, Short- Agility and Quiet Operation COMPACT YET TOUGH MINI Now KOELCO has taken the next evolutionary step by packing even more digging power and practical performance features
More informationHydraulic Excavators. Inquiries To: 4690 World Houston Parkway Houston, TX
Hydraulic Excavators ucket Capacity: 2.53 7.06 cu yd (1.93 5.4 m3) SAE heaped Engine Power: 510 HP (380 kw)/1,800 min-1 (SAE J 1309) Operating Weight: 181,440 lb (82,300 kg) with 14' 5" (4.4 m) arm Note:
More informationCOMPACT YET TOUGH MINI
SK45SRX-6/SK55SRX-6 Full-Size Performance, Short- gility and Quiet Operation COMPCT YET TOUGH MINI Now KOELCO has taken the next evolutionary step by packing even more digging power and practical performance
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 257 kw (349 PS)/1,850 min -1 (ISO 14396) Operating Weight: 52,200-52,400 kg
STANDARD EQUIPMENT ENGINE Engine, HINO P11C-UP, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Removable clean-out screen for radiator Automatic engine
More informationED160 Blade Runner. Bucket Capacity : 0.5 m 3 ISO heaped. Engine Power : 78.5 kw/2,000 min -1 (ISO14396) Operating Weight : 16,300 kg
ED160 Blade Runner Bucket Capacity : 0.5 m 3 ISO heaped Engine Power : 78.5 kw/2,000 min -1 (ISO14396) Operating Weight : 16,300 kg Power Meets Efficiency Productive Digging and Large-Capacity Dozing 1
More informationS pec1 t 1ca t ions [IT (ID[]] LC sk2solc-10 I Engine Type No. of cylinders Bore and stroke Displacement Rated power output Max. torque I Hydraulic System Direct injection, water-cooled, 4-cycle diesel
More informationLIFTING CAPACITIES SK17SR Cab Long arm: 1.2 m Bucket: without Rubber shoe: 230 mm Dozer blade: up
SK17SR-3 COMPCT YET TOUGH MINI Mini excavators are widely used on sites where space is restricted, such as in residential areas and industrial premises. Users want big power in a small machine, stability
More informationLIFTING CAPACITIES SK10SR Standard arm: m Bucket: without Rubber shoe: 180 mm Dozer blade: up 1.0 m 1.5 m 2.0 m 2.5 m At Max.
SK10SR-2 Full-Scale Performance in Compact Size For residential areas and industrial premises, you need a machine that can maneuver and swing within a compact radius. The SK10SR is designed to do just
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STNDRD EQUIPMENT ENGINE Engine, ISUZU P-LE2X engine with turbocharger and intercooler utomatic engine deceleration uto Idle Stop (IS) atteries (2 x12v 6 h) Starting motor (2 V-.2 kw), 50 alternator utomatic
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 280 HP (209 kw)/2,100 min -1 (ISO 14396) Operating Weight: 35,800 kg. Hydraulic Excavators
STANDARD EQUIPMENT ENGINE Engine, HINO J08E, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Removable clean-out screen for radiator Automatic engine
More informationEC210B LC EC210B NC/EC210B NLC
VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 344 HP (257 kw)/1,850 min -1 (ISO 14396) Operating Weight: 51,900 kg. Hydraulic Excavators
STANDARD EQUIPMENT ENGINE Engine, HINO P11C-UP, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Removable clean-out screen for radiator Automatic engine
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT SK85MSR-3E
SK85MSR-E STNDRD EQUIPMENT ENGINE Engine, ISUZU P-LE2X engine with turbocharger and intercooler utomatic engine deceleration atteries (2 x12v 6 h) Starting motor (2 V-.2 kw), 50 alternator utomatic engine
More informationHydraulic Excavators. Bucket Capacity : cu.yd. SAE. Engine Power : 157 hp {117 kw} / 2,000 rpm. Operating Weight : 48,500 lbs {22,000 kg}
Hydraulic Excavators ucket Capacity : 0.92-1.22 cu.yd. SE Engine Power : 17 hp {117 kw} / 2,000 rpm Operating Weight : 48,00 lbs {22,000 kg} (SE NET) Note: This catalog may contain attachments and optional
More informationLIFTING CAPACITIES SK25SR B c u e k :t Wi R r S e h : m 2.5 m 3.0 m At. Max. reach Radius B 3.0 m 2.5 m 2.0 m 1.0 m G. L m -1.
SK25SR-6 Compact, Tough Performer Mini excavators are widely used at sites where space is limited, such as residential areas and industrial operations. Users want big power in a small machine, stable operation,
More informationHydraulic Excavators. Bucket Capacity: 0.8 m 3 ISO heaped. Engine Power: 118 kw {160 PS}/2,000 min -1 {rpm} Operating Weight: 21,400 kg
STANDARD EQUIPMENT OPTIONAL EQUIPMENT ENGINE Engine, HINO J05E, Diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 96Ah) Starting motor
More informationLifting Capacities CAB SK22 Arm: Standard Bucket: Without Shoe: 250 mm 1.5 m 2.0 m 2.5 m 3.0 m 3.5 m At Max. Reach Radius B 2.5 m 2.0 m 1.5 m 1.
SK22 MINI EXCAVATOR DO FULL-SIZED JOBS WITH A COMPACT MACHINE Mini excavators are increasingly popular for work in confined spaces such as residential areas and buildings. But smallness alone doesn t satisfy
More informationLifting Capacities CAB SK18 Arm: Standard Bucket: Without Shoe: 230 mm 1.5 m 2.0 m 2.5 m 3.0 m At Max. Reach Radius B 2.5 m 2.0 m 1.5 m 1.0 m 0.
SK18 MINI EXCAVATOR DO FULL-SIZED JOBS WITH A COMPACT MACHINE Mini excavators are increasingly popular for work in confined spaces such as residential areas and buildings. But smallness alone doesn t satisfy
More informationHydraulic Excavators STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO J05E-TH, Diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) atteries (2 x 12V - 96Ah) Starting motor (24V - 5 kw),
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT hp (41kW) / 2,000 rpm (SAE NET) Hydraulic Excavators. Bucket Capacity : 0.29 cu.yd. (0.22 m 3 ) SAE heaped
SK75SR-E SK75SR-E STNDRD EQUIPMENT ENGINE Engine, ISUZU U-LEX engine with turbocharger and intercooler, Tier Final certified utomatic engine deceleration atteries ( xv - 6 h) Starting motor (V -. kw),
More informationEC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l
VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler
More informationHydraulic Excavators STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STNDRD EQUIPMENT ENGINE Engine, HINO J08E, Diesel engine with turbocharger and intercooler utomatic engine deceleration uto Idle Stop (IS) atteries (2 x 12V - 96h) Starting motor (24V - 5 kw), 50 amp alternator
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 124 kw/2,000 min -1 (ISO14396) Operating Weight: 24,900 kg SK260SRLC 24,800 kg SK260SRNLC
Bucket Capacity: 0.1-0.93 m 3 ISO heaped Engine Power: 124 kw/2,000 min -1 (ISO14396) Operating Weight: 24,900 kg SK260SRLC 24,800 kg SK260SRNLC Complies with the latest exhaust emission regulations US
More informationSK75SR-3E. Bucket Capacity: m 3 ISO heaped. Engine Power: 42 kw/2,000 min -1 ISO Operating Weight: 7,540 kg
SK75SR-3E Bucket Capacity: 0.11-0.35 m 3 ISO heaped Engine Power: 42 kw/2,000 min -1 ISO14396 Operating Weight: 7,540 kg Complies with the latest exhaust emission regulations US Tier IV EU Stage IIIB Latest
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT. Bucket Capacity: m 3 ISO heaped. Engine Power: 370 kw {503 PS} /1,800 min -1 {rpm} (ISO14396)
STANDARD EQUIPMENT ENGINE Engine, SAA6D14DE-5, diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) atteries (2x12V - 190Ah) Starting motor (24V - 11kW), 60
More informationTOUGH WORLD. TOUGH EQUIPMENT.
Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E
More informationEC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM
VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel
More informationLifting Capacities. Hydraulic Excavator ED160 BR-5
Lifting Capacities ED160 BR-5 A B Rating over front Rating over side or 360 degrees A Reach from swing centerline for arm top B - Arm bucket pin height above/below ground C Lifting capacities in pounds
More information157 hp (117 kw) / 2,000 min -1 {rpm} (SAE NET)
SK230SRLC-3 Hydraulic Excavators Bucket Capacity :.0 cu.yd. (0.80 m 3 ) SAE heaped Engine Power : 7 hp (7 kw) / 2,000 min - {rpm} (SAE NET) Operating Weight :,00 lb (2,000 kg) Note: This catalog may contain
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 124 kw/2,000 min -1 (ISO14396) Operating Weight: 22,500 kg - SK230SR 22,900 kg - SK230SRLC
Bucket Capacity: 0.51-0.93 m 3 ISO heaped Engine Power: 124 kw/2,000 min -1 (ISO14396) Operating Weight: 22,500 - SK230SR 22,900 - SK230SRLC Complies with the latest exhaust emission regulations US EPA
More informationHydraulic Excavators. Bucket Capacity: m 3. Engine Power: 99 HP/2,100 rpm (ISO14396) Operating Weight: 13,000 13,500 kg
Hydraulic Excavators Bucket Capacity: 0.5 0.7 m 3 Engine Power: 99 HP/2,100 rpm (ISO14396) Operating Weight: 13,000 13,500 kg The Power Wave of Change The new SK series, developed using KOBELCO s most
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 42 kw {56 PS} /2,200 min -1 {rpm} ISO14396 Operating Weight: 8,200 kg
Bucket Capacity: 0.11-0.35 m 3 ISO heaped Engine Power: 42 kw {56 PS} /2,200 min -1 {rpm} ISO14396 Operating Weight: 8,200 kg Complies with the latest exhaust emission regulations US EPA Tier III EU (NRMM)
More informationSK30SR-6E SK35SR-6E. Inquiries To: Merchants Way, Katy, Texas
SK30SR-6E SK35SR-6E Note: This catalog may contain attachments and optional equipment that are not available in your area. nd it may contain photographs of machines with specifications that differ from
More informationEC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR
VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,
More informationBucket Capacity: m 3 ISO heaped. Engine Power: 42 kw /2,000 min -1 (ISO14396) Operating Weight: 8,270 kg
ucket Capacity: 0.11-0.35 m 3 ISO heaped Engine Power: 42 kw /2,000 min -1 (ISO14396) Operating Weight: 8,270 kg Complies with the latest exhaust emission regulations US Tier IV EU (NRMM) Stage III Latest
More informationACERA GEOSPEC SK135SR-3 / SK135SRLC-3
ACERA GEOSPEC SK135SR-3 / SK135SRLC-3 Hydraulic Excavators Bucket Capacity : 0.45-0.50 m 3 ISO heaped Engine Power: 74 kw/2,000min -1 (ISO 14396) Operating Weight: 13,600 - SK135SR 13,800 - SK135SRLC ENDLESS
More informationHydraulic Excavators STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STNDRD EQUIPMENT ENGINE Engine, HINO PC, Diesel engine with turbocharger and intercooler utomatic engine deceleration uto Idle Stop (IS) atteries ( x V - 60h) Starting motor (4V - 6 kw), 60 amp alternator
More informationHydraulic Excavator SK230SRLC-5
ydraulic Excavator SK20SRLC-5 Bucket Capacity : 0.6-1.60 cu. yd. SAE Engine Power : 160 hp {119 kw} @ 2,000 rpm Operating Weight : 56,00 s {25,600 kg} (SAE NET) Note: This document may contain attachments
More informationHydraulic Excavators STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO J05E, Diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) atteries ( x V - 96Ah) Starting motor (4V - 5 kw), 50 amp
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT hp (69.2kW) / 2,000 rpm (SAE NET) Hydraulic Excavators SK140SRLC-3
SK0SRLC- SK0SRLC- STANDARD EQUIENT ENGINE Engine, MITSUISHI D0FR-7kW-0, Diesel engine with turbocharger and intercooler, Tier interim certified Automatic engine deceleration atteries ( xv - 0 Ah) Starting
More informationSwing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)
925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator
More informationLifting Capacities Rating over front
ifting Capacities Rating over front Rating over side or 90 degrees Reach from swing centerline to arm tip rm bucket pin height above/below ground C ifting capacities in pounds {kilograms} SK50C 5'{7.6
More informationEC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l
VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged
More informationTwo variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.
922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,
More informationSTANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT Hydraulic Excavators ENGINE Engine, HINO P11C, Diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) Batteries (2 x 12V - 0Ah) Starting motor
More informationEC140B LC VOLVO EXCAVATOR
VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection
More informationSK30SR-6E SK35SR-6E. Inquiries To: Merchants Way, Katy, Texas
SK30SR-6E SK35SR-6E Note: This catalog may contain attachments and optional equipment that are not available in your area. nd it may contain photographs of machines with specifications that differ from
More information936D. Cummins C8.3. Engine Gross Power. 198 kw ( ,000 rpm Net Power
Cummins C8.3 Engine Gross Power 198 kw (265.5 hp) @ 2,000 rpm Net Power 186 kw (249.4 hp) @ 2,000 rpm Maximum Digging Depth Standard Bucket Capacity The Liugong series of logos herein, including but not
More informationHydraulic Excavators STANDARD EQUIPMENT
STANDARD EQUIPMENT ENGINE Engine, HINO J05E-T, Diesel engine with turbocharger and intercooler Automatic engine deceleration Auto Idle Stop (AIS) atteries (2 x 12V - 96Ah) Starting motor (24V - 5 kw),
More informationHydraulic Excavator SK230SRLC-5
ydraulic Excavator SK230SRLC-5 Bucket Capacity : 0.63-1.60 cu. yd. SAE Engine Power : 160 hp {119 kw} @ 2,000 rpm Operating Weight : 56,400 s {25,600 kg} (SAE NET) Note: This document may contain attachments
More informationEC360B Lc EC360B NLC. more care. built in. VOLVO EXCAVATOR. Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.
VOLVO EXCAVATOR EC360B Lc EC360B NLC Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.4 t Turbocharged VOLVO diesel engine with water cooling, direct injection and
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More informationBucket Capacity: m 3 SAE heaped Engine Power: 40.4 kw (55 PS) at 2100 min -1 Operating Weight: 8,050 kg
Bucket Capacity: 0.11 0.28 m 3 SAE heaped Engine Power: 40.4 kw (55 PS) at 2100 min -1 Operating Weight: 8,050 kg Photos in this catalog may include optional items. SK80MSR: An Ideal Machine in Tight Corners
More informationHydraulic Excavators. Bucket Capacity : cu.yd. SAE. Engine Power : 270 hp {201 kw} / 2,100 rpm. Operating Weight : 81,800 lbs {37,100 kg}
Hydraulic Excavators Bucket Capacity : 1.7-2.0 cu.yd. SAE Engine Power : 270 hp {201 kw} / 2,100 rpm Operating Weight : 81,800 lbs {37,100 kg} (SAE NET) Note: This catalog may contain attachments and optional
More information307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.
307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights
More informationHydraulic Excavators. Bucket Capacity: m 3 ISO heaped. Engine Power: 118 kw {160 PS}/2,000 min -1 {rpm} (ISO14396)
Hydraulic Excavators ucket Capacity: 0.51-0.93 m 3 ISO heaped Engine Power: 118 kw {160 PS}/2,000 min -1 {rpm} (ISO14396) Operating Weight: 24,300 24,900 LC Complies with the latest exhaust emission regulations
More informationEQUIPMENT ENGINE HYDRAULIC SYSTEM
EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2
More informationMinimum Swing Radius. 75mm. 2320mm mm. 1785mm. 3020mm 3 4. Diversified operational field
MINIMUM SWING RADIUS There are times when we may change the content of the catalogue without warning There are times when printed photographs may differ from the retailer's actual specifications Photographs
More information306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg
306E Mini Hydraulic Excavator Engine Weights Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) 306E Features Increased Performance
More informationSR-5 Series SR-5 SERIES MINI EXCAVATORS. Inquiries To:
SR-5 SERIES MINI EXCVTORS SR-5 Series Note: This catalog may contain attachments and optional equipment that are not available in your area. nd it may contain photographs of machines with specifications
More informationEC460 VOLVO EXCAVATOR LONG CRAWLER
VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection
More informationEngine Gross Power Operating Weight Bucket Capacity 925E
Engine Cummins QSB6.7 Tier 4 Final Gross Power 190 Hp (142 kw) Operating Weight 55,115-62,170 lbs (25,000-28,200 kg) Bucket Capacity 0.65-1.8 yd 3 (0.5-1.4 m 3 ) 925E EXCAVATOR 2 925E EXCAVATOR 3 925E
More informationTB2150R HYDRAULIC EXCAVATOR. Operating Weight: 15,420 kg. From World First to World Leader
HYDRAULIC EXCAVATOR TB2150R From World First to World Leader Operating Weight: 15,420 kg Product Features ENGINE - EU Stage IV / EPA Tier 4 Emission Compliant - DOC+SCR Exhaust After Treatment - Automatic
More informationMinimum Swing Radius. 75mm. 2320mm. 190mm. 1000mm. Clearing the Non-road Special Motor Vehicle Exhaust Emission Standard.
MINIMUM SWING RADIUS There are times when we may change the content of the catalogue without warning There are times when printed photographs may differ from the retailer's actual specifications Photographs
More information15.8 kw / 21.2 Hp at 2200 rpm 2790 kg mm kw / 24.3 Hp at 2400 rpm 3180 kg mm. DX27z - DX30z.
15.8 kw / 21.2 Hp at 2200 rpm 2790 kg 2490-2690 18.1 kw / 24.3 Hp at 2400 rpm 3180 kg 2838-2948 - Compact Equipment DOOSAN & hydraulic excavators: two new models with novel features The new & (zero tail
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More information308E. Mini Hydraulic Excavator
308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000
More informationZAXIS-6 series HYDRAULIC EXCAVATOR
ZAXIS-6 series HYDRAULIC EXCAVATOR Model code : ZX65USB 6 Engine rated power : 42.4 kw (ISO14396) Operating weight : 6 140 6 290 kg Bucket ISO heaped : 0.22 0.24 m³ ZX65USB-6 ZX65USB-6 The efficient excavator
More informationHydraulic Excavator *9,580{4,340} *9,050{4,100} *8,950{4,050} 9,100{4,120} 8,850{4,010} 9,020{4,090} 9,700{4,390} 11,220{5,080} 14,770{6,690}
ifting Capacities SK00C 25'{7.6m} 20'{6.m} 5'{4.6m} 0'{.0m} 5'{.5m} Ground evel -5'{-.5m} -0'{-.0m} -5'{-4.6m} SK00C 25'{7.6m} 20'{6.m} 5'{4.6m} 0'{.0m} 5'{.5m} Ground evel -5'{-.5m} -0'{-.0m} -5'{-4.6m}
More informationSY215C HYDRAULIC EXCAVATOR
SY215C HYDRAULIC EXCAVATOR hydraulic excavator SY215C overview Engine Isuzu AM-4HK1X Power 128 kw /2000 rpm Operating weight 22200 kg Ground Pressure 47 kpa Bucket capacity 0.93 m³ Reliable First-class
More information