STANDARD EQUIPMENT OPTIONAL EQUIPMENT hp (69.2kW) / 2,000 rpm (SAE NET) Hydraulic Excavators SK140SRLC-3

Transcription

1 SK0SRLC- SK0SRLC- STANDARD EQUIENT ENGINE Engine, MITSUISHI D0FR-7kW-0, Diesel engine with turbocharger and intercooler, Tier interim certified Automatic engine deceleration atteries ( xv - 0 Ah) Starting motor ( V - kw), 0 amp alternator Automatic engine low idle for low engine oil pressure Engine oil pan drain cock Double element air cleaner CONTROL Working mode selector (H-mode, S-mode and ECO-mode) SWING SYSTEM & TRAVEL SYSTEM Swing rebound prevention system Straight propel system Two-speed travel with automatic down shift Sealed & lubricated track links." {00mm} track shoes Grease-type track adjusters Automatic swing brake MIRRORS & LIGHTS Three rear view mirrors and rearview camera Two front working lights Swing flashers OPTIONAL EQUIENT oom & arm load (lock) holding valve Front-guard protective structures (May interfere with bucket rotation) Additional hydraulic circuit Control pattern changer (-way) CA & CONTROL Two control levers, pilot-operated Horn, electric Integrated left-right slide-type control box Ashtray Cab light (interior) Coat hook Large cup holder Detachable two-piece floor mat 7-way adjustable suspension seat Retractable seatbelt Headrest Handrails Heater and defroster Intermittent windshield wiper with double-spray washer Sky light Top guard Tinted safety glass Pull-type front window and removable lower front window Easy-to-read multi-display monitor Automatic air conditioner Emergency escape hammer Radio, AM/FM Stereo with speakers Travel alarm Drain pressure switch DPF regeneration switch V converter Cab additional light Rain visor (may interfere with bucket action) Add-on type counterweight (+0kg) Hydraulic Excavators ucket Capacity : 0.0 cu.yd. (0. m ) SAE heaped Engine Power : 9. hp (9.kW) /,000 rpm (SAE NET) Operating Weight :,00 lb (,00 kg) Note: Standard and optional equipment may vary. Consulty our KOELCO dealer for specifics. Note: This catalog may contain attachments and optional equipment that are not available in your area. It may also contain photographs of machines with specifications that differ from those of machines sold in your area. Please consult your nearest KOELCO distributor for those items you require. Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice. Copyright by No part of this catalog may be reproduced in any manner without notice. 90 World Houston Parkway Houston, TX Inquiries To: Complies with the latest exhaust emission regulations ulletin No. SK0SRLC-NA E Printed in USA US EPA Interim Tier IV EU (NRMM) Stage III Japanese Regulations

2 Fuel Consumption Gives You the Competitive Edge KOELCO s SR hydraulic excavator has undergone a new evolution. KOELCO installed its full range of fuel-saving technologies in this SR model, resulting in unmatched low fuel consumption that provides a class leading standard of efficiency for engine-driven hydraulic excavators. Pursuing the Three E s The Perfection of Next-Generation, Network Performance The Revolutionary Integrated Noise and Dust Reduction Cooling System indr KOELCO s exclusive indr Cooling System delivers amazingly quiet operation. Ultimate -Low Noise Level of Outstanding performance in tight spaces, on-site safety, less stress for the operator KOELCO was first to understand these demands and in response developed SR, short rear swing, excavators. The acclaimed SR concept went on to be adopted throughout the industry. ut KOELCO didn t stop there. Aware of changing needs among machine users in a changing social environment, KOELCO has taken the SR concept through a further evolution with value-added features. KOELCO s unique design for engine cooling, the indr system, cuts noise to extremely low levels. The newest KOELCO approach to low fuel consumption, NEXT-E, now also applies to short rear swing models which maximize work volumes while saving on fuel. And the new ECO-mode in the SK0SRLC creates even greater savings on fuel to turn SR models into exceptional high-earning machines. KOELCO continues to lead the field in short rear swing excavators. Five Ways the SK0SRLC Scores: Enhancement Greater Performance Capacity Economy Improved Cost Efficiency Environment Features That Go Easy on the Earth The indr revolution Concept KOELCO has developed the revolutionary integrated Noise and Dust Reduction Cooling System, with the engine compartment placed inside a single duct that connects the air intake to the exhaust outlet. Reduces Noise The intake and exhaust are offset, with the holes and joints in the sections corresponding to the duct wall completely covered to reduce noise at the intake and exhaust apertures. This design, coupled with the generous use of insulationmaterial inside the duct, minimizes engine noise. Low Noise: indr More Work with Less Fuel! Efficient Performance! Fast, Accurate and Low-Cost Maintenance A Working Environment that Helps Operator Concentrate on the Job Reduces Dust The high-performance indr filter removes dust from the intake air, ensuring a quieter, cleaner engine and keeps the cooling unit free of clogging so that no regular cleaning is necessary.

3 More Work with Less Fuel! Fuel Consumption and Work Volume The new hydraulic system and an additional ECO-mode have cut fuel consumption by up to %. H-mode Fuel consumption (L/h) % (vs previous SK0SRLC in H-mode) decrease Work volume per liter of fuel (m /L) 0% increase S-mode (vs previous SK0SRLC in H-mode) Fuel consumption (L/h) % decrease Work volume per liter of fuel (m /L) 9% increase ECO-mode (vs previous SK0SRLC in S-mode) Great leap forward in energy-saving performance Fuel consumption (L/h) % decrease Work volume per liter of fuel (m /L) 9% increase * Figures for fuel consumption: fuel consumed per hour (L/h) compared with previous model, in KOELCO tests. Figures for work volume: digging volume per liter of fuel (m /L) compared with * previous model, in KOELCO tests. NEXT-E Technology New Hydraulic System Rigorous inspections for pressure loss are performed on all components of the hydraulic piping, from the spool of control valve to the connectors. This regimen, combine with the use of a new, high-efficiency pump, cuts energy loss to a minimum. NEXT-E Technology Total Tuning Through Advanced ITCS Control The next-generation engine control is governed by a new version of ITCS, which responds quickly to sudden changes in hydraulic load to ensure that the engine runs as efficiently as possible with a minimum of wasted output. ITCS (Intelligent Total Control System) is an advanced, computerized system that provides comprehensive control of all machine functions. Economy NEXT-E Technology Next-Generation Electronic Engine Control The high-pressure, common-rail fuel-injection engine with the multiple injection system features adjust table control to maximize fuel efficiency and provide powerful low-speed torque. The result is a highly fuel-efficient engine. Tier compliant engine (No Exhaust fluid required) emissions cut: Common rail system High-pressure injection atomizes the fuel, and injection timing is more precise, improving combustion efficiency. Diesel Particulate Filter (DPF) Carbon is built up as soot on the diesel particulate filter and is burned off at high temperature. No Exhaust fluid required. The system allows manual or automatic filter regeneration. NOx emissions cut: Limits creation of particulate matter (which results from incomplete combustion of fuel) Reduces nitrogen oxides (created by reaction with oxygen at high temperature) Platinum catalyzer Filter ECO-mode Work modes for a closer match to the job at hand. An addition to the existing H-mode and S-mode, the new ECO-mode saves even more energy. H-mode: For heavy duty operation, when a higher performance level is required. S-mode: For normal operations with lower fuel consumption. ECO-mode: Puts priority on low fuel consumption and economic performance. Significant Extension of Continuous Working Hours The combination of a large-capacity fuel tank and excellent fuel efficiency Fuel tank capacity: delivers an impressive. U.S.gal increase in the length of continuous usage. (00 L) H S E Photos in this catalog are the machine with the option installed. EGR cooler While ensuring sufficient oxygen for combustion, cooled exhaust gases are mixed with the air intake and re-circulated into the engine. Then the oxygen concentration is lowered and the combustion temperature is lowered. Automatic Acceleration / Deceleration Function Reduces Engine Speed Engine speed is automatically reduced when the control lever is placed in neutral, effectively saving fuel and reducing noise and exhaust emissions. The engine quickly returns to the previous speed when the lever is moved out of neutral. Engine Speed Air intake Electronic control EGR valve Lever Off (Neutral) seconds Exhaust Water-cooled EGR Lever On Lever Stroke

4 Enhancement Efficient Performance! Top-Class Powerful Digging Seamless, Smooth Combined Operations Excellent Working Ranges Requires ft. 9 in. of Working Space For more efficient work performance. (SAE J79:990) Max. arm crowding force: Max. bucket digging force: Powerful Travel Drawbar pulling force:,00lbs {0.kN},700lbs {.7kN},00lbs {9kN} The machines have inherited the various systems that make inching and combined operations easy and accurate, with further refinements that make a good thing even better. Leveling and other combined operations can be carried out with graceful ease. Electronic active control system Arm regeneration system oom lowering regeneration system Variable swing priority system Swing rebound prevention system Greater working ranges with class-topping vertical digging depth. Max. digging height: '" {9,0mm} Max. dumping height: '" {7,00mm} The compact design allows the machine to perform continuous dig, 0 swing and dump operations within a working space of ft.9in". Min. front Tail swing swing radius 7'0" {,00mm} radius '" {,90mm} Great Swing Power, Short Cycle Times Powerful swing power and top-class swing speed. Swing speed:.0rpm Optional N& (crusher and breaker) The operator selects the desired mode from inside the cab, and the selector valve automatically configures the machine accordingly. Attachment Mode Selector Switch Max. digging reach: '0" {,70mm} Max. vertical digging depth: 7'0" {,0mm} There is a choice of three different attachment modes, to accommodate bucket, crusher, or breaker. The desired attachment mode can be selected with a switch, which automatically configures the selector valve. All attachment modes can be used in either S-mode or H-mode. Tail overhang 7.7" {9mm} Working radius '9" {,90mm} Working radius equals the sum of the minimum front swing radius and tail swing radius. When the add-on type counterweight (+0 kg) is installed, the values of tail overhang and tail swing radius are increased. Mild Operating Sound The indr cooling system also helps to keep the machine quiet, even at close quarters. Meets EMC(Electromagnetic Compatibility) Standards in Europe Electrical shielding ensured that the machines clear all European standards and neither cause or are affected by electromagnetic interference.

5 A Working Environment that Helps the Operator Concentrate on the Job at Hand! ig Cab The ig cab provides a roomy operating space with plenty of legroom, and the door opens wide for entry and exit. As well as giving a wide, open view to the front, the cab has increased window areas on both sides and to the rear, for improved visibility in all directions. ROPS Cab Environment The newly developed, ROPS (Roll-Over-Protective Structure)-compliant cab clears ISO standards (ISO-7-: 00) and ensures greater safety for the operator. Excellent Visibility Taking out the right-side cab support to make a single window has improved visibility to the right. Level FOPS Guard (ISO 0) is equipped as standard. To fit vandalism guards, please contact your KOELCO dealer. (Mounting brackets for vandalism guards provided standard) Wide-Access Cab Aids Smooth Entry and Exit Easy entry and exit assured with wider cab entry and safety lock lever integrated with mounting for control levers. Comfortable Operating Environment Multi-Display Color Monitor The LCD multi-display color monitor is fitted as standard. Operations data as well as the full range of machine-status data can readily be checked. FOPS guard (Meets or exceeds current OHSA standards) Safety Features Double slide seat One-touch lock release simplifies opening and closing front window Protective panel separates the pump Retractable seatbelt requires compartment from the engine no manual adjustment Powerful automatic air Two-speaker FM/AM radio conditioner with station select Spacious luggage tray Large cup holder Fuel consumption Maintenance Rearview monitoring Rear view camera Hammer for emergency exit Handrails meet European standards Thermal guard prevents contact with hot components during engine inspections Travel alarm Swing flasher 7

6 Economy Fast, Accurate and Low-Cost Maintenance Comfortable "On the Ground" Maintenance All components that require regular maintenance are laid out for easy access with the control valves located on a single right-hand panel that opens and closes at a touch. In the pump compartment, there is remote access to such components as the engine oil filter and fuel filter (with built-in water separator). On the left side are the indr filter, air cleaner, radiator coolant, etc. Daily maintenance can be carried out easily without the need to climb up to the machine. Left side 7 indr Means Easy Maintenance indr Filter locks Out Dust Outside air goes directly from the intake duct through the indr filter for dust removal. The filter features a 0-mesh screen, which means it has sixty holes per inch both vertically and horizontally, with a wide front surface area and accordion structure that resists clogging. Visual Checking and Easy Cleaning When checking and cleaning the cooling system, one must deal with several cooling components like the radiator, oil cooler and intercooler, which all must be handled in different ways. ut with the indr filter, there's just one filter in one place. If it looks dirty during start-up inspection, it can be cleaned easily and quickly. Radiator reservoir tank Air cleaner Easy access to cooling units Long-Interval Maintenance Long-life hydraulic oil:,000 hours Long-life hydraulic oil reduces cost and labor. Super-fine Filter(Hydraulic oil filter) Highperformance, super-fine filter has a,000 hour replacement cycle. Right side Hydraulic pump Easy access to pump Fast Maintenance Fuel Filter Fuel pre-filter Tool box Easy access to main control valves Easy Cleaning 7 Engine quick Fuel tank Hour meter can Easy-access Washer fluid Detachable Internal and Special crawler drain cock can be turned without tools. equipped with bottom flange and large drain valve. be checked while standing on the ground. fuse box. More finely differentiated fuses make it easier to locate malfunctions. tank located under the cab floor mat. two-pieace floor mat with handles for easy removal. A floor drain located under floor mat external air conditioner filters can be easily removed without tools for cleaning frame designed is easily cleaned of mud Total Support for Machines with Network Speed and Accuracy Our "KOMEX" allows you to use the Internet to manage information from your office for machines operating in all areas. e prepared for any problems with strategic information and cost management. This provides a wide range of support for your business operations. Direct Access to GPS Operational Status Location Data Operating Hours Fuel Consumption Data Graph of Work Content ase station Graph of Machine Duty Cycles Maintenance Data and Warning Alerts Machine Maintenance Data Security System Engine Start Alarm Area Alarm Hydraulic excavator Web server KOELCO service personnel/dealer/customer Double-Element Air Cleaner The high-performance air cleaner has twice the capacity and service life of previous air cleaners and is installed behind the indr filter for even more effective cleaning performance. Monitor Display with Essential Information for Accurate Maintenance Checks Displays only the maintenance information that s needed, when it s needed. Self-diagnostic function that provides early-warning detection and display of electrical system malfunctions. Record function of previous technical issues including irregular and transient malfunction. Choice of Languages for Monitoring Display With messages including those requiring urgent action displayed in the local language, users in all parts of the world can work with greater peace of mind. 9 0

7 Specifications SK0SRLC- Engine Model MITSUISHI D0EG-7kW-0 Direct injection, water-cooled, -cycle Type: diesel enginewith turbocharger, intercooler No. of cylinders: ore and stroke:.70" (9 mm) x.7" (0 mm) Displacement: 0. cu.in. (. L) Rated power output: 9. hp {9.kW} /,000 rpm (SAE NET) Max. torque: lb-ft {9N. m} /,00 rpm (SAE NET) Pump Type: Hydraulic System Max. discharge flow: Relief valve setting oom, arm and bucket: Travel circuit: Swing circuit: Control circuit: Pilot control pump: Main control valves: Oil cooler: Swing motor: Parking brake: Swing System Swing speed: Swing torque: Tail swing radius: Min. front swing radius: Attachments Two variable displacement pumps x. U.S.gph { x 0L/min}, x. U.S.gph { x 0L/min},970 psi {. Mpa},970 psi {. Mpa},00 psi {.0 Mpa} 7 psi {.0 Mpa} Gear type -spool Air cooled type Axial piston motor Oil disc brake, hydraulic operated automatically.0 rpm 9,00 lb. ft {9.9 kn. m} (SAE) '" {,90 mm} 7'0" {,00 mm} Travel System Travel motors: Parking brakes: Travel shoes: Travel speed: Drawbar pulling force: Gradeability: Cab & Control Cab All-weather, sound-suppressed steel cab mounted on the silicon-sealed viscous mounts and equipped with a heavy, insulated floor mat. Control Two hand levers and two foot pedals for travel Two hand levers for excavating and swing Electric rotary-type engine throttle oom, Arm & ucket oom cylinder: Arm cylinder: ucket cylinder: Dozer cylinder: Dimension: Working range:.9" {00 mm} x '7" {,09 mm}." { mm} x '" {,0 mm}.7" {9 mm} x '0" {90 mm} Dozer lade (Optional) Fuel tank: Cooling system: Engine oil: Travel reduction gear: Swing reduction gear: Hydraulic oil tank: x axial piston, two-speed motors Oil disc brake per motor each side. /. mph {. /. km/h},00 lbs {9 kn} (SAE J 09) 70 % { }." {0 mm} x.7" {0 mm} '" {,90 mm} (width) x '" {7 mm} (height) '" {00 mm} (up) x '" { mm} (down) Refilling Capacities & Lubrications. U.S.gal {00 L}.0 U.S.gal { L}.0 U.S.gal {. L} x 0. U.S.gal { x. L} 0. U.S.gal {. L}. U.S.gal {. L} tank oil level. U.S.gal {.7 L} hydraulic system Working Ranges oom Arm Range a- Max. digging reach b- Max. digging reach at ground level c- Max. digging depth d- Max. digging height e- Max. dumping clearance f - Min. dumping clearance g- Max. vertical wall digging depth h- Min. swing radius i - Horizontal digging stroke at ground level j - Digging depth for feet flat bottom ucket capacity SAE heaped cu.yd.{m } Digging Force Arm length ucket digging force Arm crowding force Dimensions SAE ISO SAE ISO Arm length A Overall length Overall height (to top of boom) C Overall width of crawler D Overall height (to top of cab) E Ground clearance of rear end* F Ground clearance* Unit: ft-in{m} '"{.m} 7'0"{.m} 9'"{.m} 7'"{.} '0"{.9} '"{.} 0'"{9.9} '"{.7} '"{.} '"{.9} '7"{.00} '0"{.} 7'"{.9} 0. {0.0} 7'0"{.m} 9,7 {7.} 0, {90.},00 {.},7 {.} 7'0"{.m} A '0"{.7} '"{.} 9'7"{.9} '"{9.} '"{7.0} 7'"{.} 7'0"{.} 7'0"{.0} '"{.70} 9'0"{.79} 0.0 {0.} Unit: lbs {kn} 9'"{.m} 0,0 {9.},7 {9.0}, {.},9 {.} 9'"{.m} '7"{7,00} '7"{7,00} '"{,70} 0'"{,0} '"{,90}** 9'"{,0}.7"{} 7."{0} G H I J K L G d e c j g f Tail swing radius Tumbler distance Overall length of crawler Track gauge Shoe width Overall width of upperstructure D a b 9 m 7 m i h Unit: ft-in{mm} '"{,90} ('"{,00}***) 9'"{,00} '"{,70} '"{,990} 9.7"{00} /."{00} / 7."{700} '"{,90} * Without including height of shoe lug ** Shoe width :. {00mm} *** With add-on type counterweight K 0 m m 7'0" {.m} Arm 9'" {.m} Arm ackhoe bucket and arm combination Use ucket capacity SAE heaped cu.yd.{m } Struck cu.yd.{m } Opening width With side cutter inches {mm} Without side cutter inches {mm} No. of bucket teeth ucket weight lbs {kg} 0. {0.} 0. {0.0} {90} 0 {00} 0 {0} 0. {0.} 0.0 {0.} {700} {00} 0 {00} 0.0 {0.} 0.7 {0.} {00} {700} 70 {0} ackhoe bucket Normal digging 0.9 {0.} 0. {0.} {9} {} 790 {0} 0. {0.0} 0.0 {0.} 9 {,000} {900} 0 {90} 0.7 {0.7} 0. {0.} {,00} 9 {,000} 0 {00} 0.90 {0.70} 0. {0.0} {,0} 0 {00} '0"{.09 m} arm Combinations 7'0"{. m} arm 9'"{. m} arm Standard Recommended Loading only Operating Weight & Ground Pressure In standard trim, with standard boom, 9'"{.m} arm, and 0.0 cu.yd. {0.m } SAE heaped bucket Shaped Shoe width inches {mm} Overall width of crawler ft-in{mm} Ground pressure psi {kpa} Operating weight lbs {kg} Dozer (optional) weight lbs {kg} Ground pressure psi {kpa} H I 9.7"{00} '"{,90}.0{} 0,00{,00},00{,00}.{} E K F J C Triple grouser shoes (even height)."{00} '"{,90}.{},00{,00},00{,900}.{7} 7."{700} '0"{,90}.{},00{,00},00{,00}.7{}

8 Specifications SK0SRLC- Lifting Capacities SK0SRLC- Offset oom Specifications Working Ranges Unit: ft-in{m} oom Offset oom Specification Arm Offset Max. Left 7'"{.0 m} Center Max. Right Max. Left '"{.0 m} Center Max. Right a- Max. digging reach '"{7,0} '0"{7,70} '"{7,0} '"{7,0} '"{7,0} '"{7,00} b- Max. digging reach at ground level '"{,90} '"{7,0} '0"{,970} '9"{7,0} '"{7,0} '9"{7,0} c- Max. digging depth '0"{,0} '"{,90} '9"{,00} '0"{,0} 7'"{,0} '9"{,00} d- Max. digging height '7"{7,0} '9"{,0} '7"{7,00} '"{7,970} 7'"{,0} '"{7,90} e- Max. dumping clearance 7'9"{,0} '"{,770} 7'9"{,0} '"{,90} 9'"{,90} '"{,70} f - Min. dumping clearance '9"{,070} 7'"{,0} '9"{,00} '0"{,70} '"{,0} '0"{,770} g- Max. vertical wall digging depth 0'"{,0} '0"{,00} 0'7"{,0} '7"{,0} '0"{,900} '7"{,0} h- Min. swing radius '"{,0} '"{,70} '9"{,00} '"{,900} '0"{,790} '"{,0} i - Horizontal digging stroke at ground level '"{,770} '0"{,70} '"{,770} '"{,0} '0"{,0} '"{,0} j - Digging depth for feet flat bottom '"{,0} '0"{,0} '7"{,0} '"{,0} '0"{,0} '"{,70} ucket capacity SAE heaped cu.yd.{m } 0.9{0.} 0.0{0.} d c e f g j m 7 i a b h m 9m 7 0 m Center Rating over front Rating over side or 0 degrees A Reach from swing centerline for bucket hook ucket hook height above/below ground C Lifting capacities in pounds SK0SRLC Arm: 9'"{.m} ucket: 0.0cu.yd. {0.m } SAE heaped 70 lbs {0kg} Counterweight ; 7,0 lbs {,00kg} Shoe:."{00mm} A '{.m} 0'{.0m} '{.m} 0'{.m} '{7.m} At Max. Reach Radius ' {7.m} *,0{,00} *,0{,00} '"{.m} 0' {.m} *,00{,0} *,00{,0} *,90{,0} *,90{,0} *,700{,0} *,700{,0} 0'"{.m} ' {.m} *,0{,790} *,0{,790} *,00{,0},00{,0} *,0{,0} *,0{,0} '"{7.0m} 0' {.0m} *0,0{,0} *0,0{,0} *7,70{,0},00{,900},90{,90},0{,70} *,0{,0},0{,0} '"{7.m} ' {.m} *,700{7,0} 0,0{,90} *9,70{,00},70{,90},00{,70},0{,90} *,00{,90},0{,00} *,70{,0},0{,00} '"{7.m} G.L. *7,00{7,70} 9,70{,0} 9,0{,90},70{,0},770{,0},0{,70} *,0{,0},0{,00} '"{7.m} -' {-.m} *0,00{,0} *0,00{,0} *7,70{,00} 9,0{,0},90{,00},90{,0},0{,0},0{,0} *,00{,0},0{,0} '0"{7.0m} -0' {-.0m} *,70{7,0} *,70{7,0} *,0{,0} 9,90{,0},90{,00},90{,0},700{,0},0{,0} 0'0"{.09m} -' {-.m} *9,790{,0} *9,790{,0} *,0{,70},0{,0} '"{.7m} SK0SRLC Arm: 9'"{.m} ucket: 0.0cu.yd. {0.m } SAE heaped 70 lbs {0kg} Counterweight ;,0 lbs {,0kg} Shoe:."{00mm} A '{.m} 0'{.0m} '{.m} 0'{.m} '{7.m} At Max. Reach Radius ' {7.m} *,0{,00} *,0{,00} '"{.m} 0' {.m} *,00{,0} *,00{,0} *,900{,0} *,90{,0} *,700{,0} *,700{,0} 0'"{.m} ' {.m} *,0{,790} *,0{,790} *,00{,0},0{,00} *,0{,0} *,0{,0} '"{7.0m} 0' {.0m} *0,0{,0} *0,0{,0} *7,70{,0} 7,0{,0} *,0{,970},0{,90} *,0{,0} *,0{,0} '"{7.m} ' {.m} *,700{7,0},0{,00} *9,70{,00},0{,90},70{,00},00{,0} *,00{,90},70{,0} *,70{,0},0{,90} '"{7.m} G.L. *7,00{7,70},00{,990} 0,0{,0},90{,70},0{,90},70{,700} *,0{,0},0{,90} '"{7.m} -' {-.m} *0,00{,0} *0,00{,0} *7,70{,00} 0,70{,0} 9,90{,00},0{,0},0{,0},0{,0} *,00{,0},90{,0} '0"{7.0m} -0' {-.0m} *,70{7,0} *,70{7,0} *,0{,0} 0,70{,90} 9,90{,0},0{,0},970{,700},90{,70} 0'0"{.09m} -' {-.m} *9,790{,0} *9,790{,0} *,0{,70} *,0{,70} '"{.7m} Dimensions '7" {,0} '0" '0" {,70} {,0} 7." {90} 7.0" {0}." {0} R'" {,0} R'" {,90} R'9" {,0} R'" {,90} '" {,90} ['" {,00}]." {0} 9.7" {00}." {7}.7" {} 7'" {,0} 9'" {,0} '" {,90} Unit: ft-in{mm} SK0SRLC A ' {7.m} 0' {.m} ' {.m} 0' {.0m} ' {.m} G.L. -' {-.m} -0' {-.0m} SK0SRLC A ' {7.m} 0' {.m} ' {.m} 0' {.0m} ' {.m} G.L. -' {-.m} -0' {-.0m} Arm: 7'0"{.m} ucket: 0.cu.yd. {0.0m } SAE heaped 0 lbs {0kg} Counterweight ; 7,0 lbs {,00kg} Shoe:."{00mm} '{.m} 0'{.0m} '{.m} 0'{.m} At Max. Reach Radius *,70{,0} *,90{,0} *,70{,0} *,90{,0} *,0{,0} *7,0{7,0} *,0{7,0} *7,90{7,0} *,00{,0} *,0{,0} 0,0{,0} 9,0{,0} 9,70{,0} 9,990{,0} *,0{,0} *7,00{,90} *,0{,900} 9,0{,0} 9,0{,0} 9,0{,0} 9,0{,0} *,0{,0},0{,00},00{,0},90{,0},0{,0},00{,00},70{,0} *,0{,70},0{,90},00{,70},0{,0},770{,0},990{,00},0{,70},0{,0},0{,0},0{,70} *,0{,00} *,770{,0} *,90{,70} *,0{,00} *,90{,0} *,0{,0} *,70{,070},0{,0} *,0{,00} *,770{,0} *,90{,70} *,0{,00},00{,70},0{,0},90{,0},90{,770} '"{.70m} '"{.m} '"{.m} '"{7.07m} '"{7.m} '"{7.0m} '"{.m} '0"{.m} Arm: 7'0"{.m} ucket: 0.cu.yd. {0.0m } SAE heaped 0 lbs {0kg} Counterweight ;,0 lbs {,0kg} Shoe:."{00mm} '{.m} 0'{.0m} '{.m} 0'{.m} At Max. Reach Radius *,70{,0} *,90{,0} *,70{,0} *,90{,0} *,0{,0} *7,0{7,0} *,0{7,0} *7,90{7,0} *,00{,0} *,0{,0},900{,90},0{,00},00{,000},70{,0} *,0{,0} *7,00{,90} *,0{,900} *0.0{,70} 0,00{,70} 0,0{,0} *9,70{,90} *,0{,0} *7,00{,90} 7,00{,0},0{,90},90{,70},0{,0},90{,70} *,0{,70} 7,00{,0},70{,00},0{,90},0{,90},90{,00},0{,90},00{,0},0{,70},70{,700} *,0{,00} *,770{,0} *,90{,70} *,0{,00} *,90{,0} *,0{,0} *,70{,070} *7,70{,0} *,0{,00} *,770{,0} *,90{,70} *,0{,00} *,90{,0},00{,70},0{,0},90{,00} '"{.70m} '"{.m} '"{.m} '"{7.07m} '"{7.m} '"{7.0m} '"{.m} '0"{.m} 0'0" {,00} '" {,70} '0" {7,70} " {}." {00} 7." {0} '" {,990} '" {,90} Operating Weight & Ground Pressure In standard trim, with standard boom, 7'" {.0m} arm, and 0.9 cu.yd. {0.m } SAE heaped bucket Shaped Shoe width Overall width of crawler Ground pressure Operating weight ft-in {mm} ft-in {mm} psi {kpa} lbs {kg} 9.7" {00} '" {,90}. {},700 {,00} Triple grouser shoes (even height)." {00} '" {,90}. {},00 {,700} [ ] With add-on type counterweight 7." {700} '0" {,90}. {},00 {,900} Notes:. Do not attempt to lift or hold any load that is greater than these lift capacities at their specified lift point radius and heights. Weight of all accessories must be deducted from the above lift capacities.. Lift capacities are based on machine standing on level, firm, and uniform ground. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, experience of personnel, etc.. ucket lift hook is defined as lift point.. The above lifting capacities are in compliance with SAE J/ISO 07. They do not exceed 7 % of hydraulic lifting capacity or 7 % of tipping load. Lifting capacities marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.. Operator should be fully acquainted with the Operator s and Maintenance Instructions before operating this machine. Rules for safe operation of equipment should be adhered to at all times.. Lift capacities apply to only machines as originally manufactured and normally equipped by KOELCO CONSTRUCTION MACHINERY CO., LTD.