Telescoping Crawler Crane. Maximum Crane Capacity. 13,200 lb. (6,000kg.)

Size: px

Start display at page:

Download "Telescoping Crawler Crane. Maximum Crane Capacity. 13,200 lb. (6,000kg.)"

Noah Jefferson
5 years ago
Views:

1 Telescoping Crawler Crane Maximum Crane Capacity 13,200 lb. (6,000kg.)

10716 Telescoping Crawler Crane Specifications Model CC1485S-1 Crane max. capacity 13,200 lb. (6,000 kg.) Max. working radius Crane Capacity & Reach 52.8' (16.1m) Max. lifting height 54.8' (16.7m), 72.

) fly Machine Weight Weight & Dimension jib 21'3" (6,460mm) x 8'2"(2,490mm) x 9'5" (2,865mm) Overall length x width x height Crawler standard pad width 1'8" (500mm) Swing radius /Tail swing Hook

, 4th layer-4 part Hoist wire rope standard Telescopic system telescoping to full stroke 37'9" (11.52m) / 33sec -4 80 degree / 19sec Slew angle / time 360deg /1.9rpm low 1.18mph (1.9km/h) / high 1.

50 kgf/cm2) Model Diesel engine MOMENT LIMITER DIGITAL LOAD SYSTEM: -ANTI-TWO-BLOCK -WINCH LOW CABLE AUTO-STOP -CRANE INTERLOCK, AUTOMATIC STOP OF DANGER FUCTIONS -OPERATOR PROGRAMABLE WORKING

2 10716 Telescoping Crawler Crane Specifications Model CC1485S-1 Crane max. capacity 13,200 lb. (6,000 kg.) Max. working radius Crane Capacity & Reach 52.8' (16.1m) Max. lifting height 54.8' (16.7m), 72.2' (22.0m) with ﬂy jib Max. reach below ground level 80.7' (24.6m), 165.7' (50.5m), 339.5' (103.5m), part 4, 400 lb. ( 2,000 kg) Max. capacity 31,747 lb. (14,400kg ) +660lb. (300kg.) fly Machine Weight Weight & Dimension jib 21'3" (6,460mm) x 8'2"(2,490mm) x 9'5" (2,865mm) Overall length x width x height Crawler standard pad width 1'8" (500mm) Swing radius /Tail swing Hook block 5'1" (1,550mm) / 1'0" (305mm) over side only 2 Speed winch system standard 3 sheave hook block for 4 & 2 part reeving Hook block speed low/high 105'(32.0m) / 151' (46.0m) ft/min., 4th layer-4 part Hoist wire rope standard Telescopic system telescoping to full stroke 37'9" (11.52m) / 33sec degree / 19sec Slew angle / time 360deg /1.9rpm low 1.18mph (1.9km/h) / high 1.99mph (3.2km/h) 2 Speed Travel low/high Drive system 20 degree set limit Gradability Ground pressure w/ std. pad 7.12 psi (.50 kgf/cm2) Model Diesel engine MOMENT LIMITER DIGITAL LOAD SYSTEM: -ANTI-TWO-BLOCK -WINCH LOW CABLE AUTO-STOP -CRANE INTERLOCK, AUTOMATIC STOP OF DANGER FUCTIONS -OPERATOR PROGRAMABLE WORKING ENVELOPE AREA LIMITS -ENGINE / MACHINE PERFORMANCE MONITOR -RATED CAPACITY CHARTS FOR STANTIONARY, PICK & CARRY, AND OPTIONAL FLY JIB LIFTING OPERATIONS 15'6" (4.745m) 53'4" (16.265m) Main boom length min./max hoist system Hoist angle / time Swing system Safety IWRC 6 x Fi(29) φ10mm x 377' (115m) Fully automatic 5-section heptagonal telescopic boom type ISUZU 4LE2XDPC Engine power EPA tier 4 final Emission level Displacement 2.179L 2,179 Rated output hp (40.3kW 2,000min-1 ) 30.8 gal. (140L) Fuel / Fuel tank capacity Standard safety features & performance devices anti-two-block, Winch low cable auto-stop, tilt/inclination alarm, EMO switch, moment limiter digital load system w/ auto stop & working area limits, engine/machine perfromance monitor, working status lamp, rear view camera, Data logger, Work & boom lights... mm) 21'3" (6460mm) 15'4" (4680mm) 6.5"(170mm) 9'5"(2865mm) 2'11"(890mm) 11'10" (3610mm) CONTROLLED ENVIRONMENT OPERATORS CAB: -AIR CONDITIONING, HEATER & DEFROSTER -JOY STICK CRANE OPERATIONAL CONTROLS -LOW/HIGH SPEEDS ON WINCH &TRAVEL -360 DEGREE PANARAMIC VIEW SAFETY GLASS -AUTOMATIC REAR FACING CAMERA -WINDSHIELD AND ROOF WIPERS Options Compactness 265mm) m) 53'4" (16 15'6" (4745m 9'6" (2880mm) Cab -FLY JIB WITH FOUR OFFSET ANGLES -BOLT ON TRACK PADS, BLACK RUBBER OR GREY NON-MARKING -WIRELESS REMOTE CONTROLNG -SINGLE PART BALL/HOOK -RAILROAD RAIL DRIVE TRACK ATTACHMENT 1'8" (500mm) (1550 R 5'1" 8'2" (2490mm) 6'6" (1990mm) Dimensions STATE OF THE ART ISUZU DIESEL ENGINE: -EPA TIER 4 FINAL EMISSION STATUS -INCREASED FUEL EFFICIENCY (40% BETTER THAN TIER 3 ENGINES) -SMALL ENOUGH FOR INDOOR PLANT & REFINERY, FITS THRU BAY DOORS -ZERO TAILSWING FRONT & REAR -ONLY 1' TAILSWING OVER THE SIDE -TRANSPORT HEIGHT UNDER 9-1/2' -ZERO FOWARD OVERHANG W/ BOOM RAISED -REMOVABLE COUNTERWEIGHT FOR REDUCED TRANSPORTION WEIGHT -FITS BETWEEN HIGHWAY BARRIERS This is N.American PRELIMINARY information. Due to improvements, the speciﬁcations are subject to change without notice.

3 MAEDA CC1485S-1 RATED LOAD WORKING RANGE CHART IMPERIAL: ft., lb.

4 MAEDA CC1485S-1 RATED TOTAL LOAD CHART RATED TOTAL LOAD CHART FOR 4-PART, MAIN BOOM, HOOK BLOCK Working 15.5' <= 25.0' <=34.5' radius (ft.) <=43.9' IMPERIAL,ft., lb. <=53.3' angle range (deg) 0~64.3 0~74.4 0~78.8 0~80.0 0~80.0 Notes: -When using 2-part reeving on the hook block the Rated Loads are limited to 6,600lb. When reeved for 1- part line use, from the main boom tip, the Rated Loads are limited to 3,300lb. -" angle range" shows the maximum boom angle, as to achive the mininimum listed working radius, with the longest boom of that boom length range. -The standard supplied hook block weight is 200lb. -This chart is for sales reference only, N. American preliminary information. Do not use this chart for lifting. Refer to the actual machines Rated Total Load Chart and its notes for exact details

5 MAEDA CC1485S-1 RATED LOAD WORKING RANGE CHART

6 MAEDA CC1485S-1 RATED TOTAL LOAD CHART RATED TOTAL LOAD CHART FOR 4- PART, MAIN BOOM, HOOK BLOCK Working 4.745m <=7.625m <=10.505m <=13.385m radius (m) METRIC kg. m <=16.265m angle range (deg) 0~64.3 0~74.4 0~78.8 0~80.0 0~80.0 Notes: -When using 2-part reeving on the hook block the Rated Loads are limited to 3,000 kg. When reeved for 1- part line use, from the main boom tip, the Rated Loads are limited to 1,500kg. -" angle range" list the maximum boom angle, as to achive the mininimum listed working radius, with the longest boom of that boom length range. -The standard supplied hook block weight is 90kg. -This chart is for sales reference only, N. American preliminary information. Do not use this chart for lifting. Refer to the actual machines Rated Total Load Chart and its notes for exact details

Maeda MC285CRM(E) Technical specifi cations

Maeda MC285CRM(E) Technical specifi cations Offering the best balance of power and design Slim (750mm) Wide Body Programmable Moment Limiter Rubber Tracks Hydrostatic Transmission Tilt Sensor/Alarm Track