Transfero Connect TV 4-14 INSTALL
|
|
- Corey Parker
- 5 years ago
- Views:
Transcription
1 WXMOIN SAFETY INSECTION DISASSEMBLING DISOSAL prescriptions SAFETY INSECTION ersonnel Installing and operating personnel must possess the appropriate knowledge and training. Follow the instructions Installation, operation, maintenance and disassembly must be carried out as stated and showed in the different instruction manuals making integral part of the delivery and in accordance with best practice. In addition to the IMI Hydronic Engineering instructions, additional instructions from other companies may be included for the components used (e.g. backflow preventers). You must follow these instructions in the same way as the IMI Hydronic Engineering instructions. If anything is unclear, please contact IMI Hydronic Engineering customer service. Tests for commissioning and periodic inspections Test required for commissioning and periodic inspections must be performed according to the regulations in the country where the device is installed and operated. There are no unified international regulations for the acceptance test prior to commissioning and periodic inspections. It is usually the vessels that determine how the installation is classified. These are CE type-tested in accordance with guideline ED/2014/68/EU for pressurised equipments. For periodic inspections, openings are provided for flange-type or endoscope inspections. In Switzerland, Compresso does not require autorisation from the SVTI if the installation is protected in such a way that psch is not exceeded. Vessels with psv x V up to 3000 bar*litres do not require inspection by the SVTI. Following combinations with TecBox are recommended: rimary vessel (2) TecBox safety valve (SV) C 10 C litres 3 bar on request 800 litres 3.75 bar on request 700 litres 4.2 bar on request 600 litres 5 bar on request 500 litres 6 bar 6 bar 300 litres 10 bar For Transfero as many extension vessels as required can be connected to the primary vessel. The CE-approved 2 bar safety valve protects the vessels from inadmissible pressures. In Switzerland, SVTI inspection is not required for these types of vessels. Backflow preventer BA: erform inspection and maintenance in accordance with EN 1717 and the rules in the operator s country. Functional testing, with documentation, must normally be carried out annually. Dirt trap (SF): Inspect and clean if necessary after a drop in the water make-up capacity or before functional testing of the backflow preventer BA. We recommend including the leno / R / CR / BA4R in the maintenance cycle of the connected pressure-maintaining or degassing station. Follow the maintenance instructions for Refill softening modules. The leno / R / CR / BA4R can work as an accessory in systems requiring technical inspections (Compresso Transfero) and can be included as part of the inspection. lace of installation The access to the place of installation must be restricted to trained and specialised personnel. The floor statics must be able to support the maximum operating and installation conditions. Connections for electricity, communication, main water and waste water must correspond to the requirements of the device. The room must be thouroughly ventilated. Do not store flammable, explosive materials near the pressure vessel. ressurized containers (eg Compresso expansion vessels) must be protected against external fire, at least according to national regulations. Water quality IMI Hydronic Engineering devices are designed to maintain pressure, to degass or to make-up and/or treat water in closed heating, solar and cooling systems with water that contains no aggressive or toxic agents.the entire system must be dimensioned and operated in such a way as to minimise the amount of oxygen admitted through the make-up water or through permeable components. Water treatment systems are to be dimensioned, installed and operated according to the current state of the art. Electrical connection The electrical and the communication wiring and connections should be carried out by a qualified electrician, in accordance with current local regulations. The devices and the potential free outputs must be disconnected from the electrical supply before working on electrical components. rotection on the supply to be done by the contractor: Compresso C2.1, C10.1; C10.2; C15; CX: 10 A Compresso C15.2: 16 A Transfero range 4, 6, 8, 10, 14 = 1 x 230 V: Transfero 19, 25 = 3 x 400 V: 10 A Vento range 2, 4, 6, 8, 10, 14 = 1 x 230V: 10 A Vento range 19, 25 = 3 x 400 V: 10 A leno I9.1; I6.1: 10 A I6.2: 16 A Residual current device (RCD) following local regulation. T.1: 10 A T.2: 16 A If installed in residential building we recommend a commercially available line filter to the junction box. en de fr nl WTMOIN Transfero Connect TV 4-14 INSTALL Compresso Transfero Vento leno leno Refill
2
3 TU-E Art.Nr TU Art.Nr TG Art.Nr TG-E Art.Nr Transfero TU/TUE Transfero TG/TGE LT LT 3
4 C C T.1: 1x230V, 10A T.2: 1x230V, 16A TU/TG TUE/TGE L L L mm 4
5 Transfero TU Transfero TUE A B 5
6 Transfero TG Transfero TG-E A B 6
7 DLV TV.1 E (C) (H) Optional leno / leno Refill TecBox Transfero TV.1 E(H)(C) Statico SD/SU TU / TG TU..E / TG..E leno BA4 R TV 4_, TV 6_, TV 8_ : SD/SU 50 l TV 10_, TV 14_ : SD/SU 80 l leno AB 5 Sin1 Sout Sin2 T SYS leno AB5 R + leno Refill TV 10/14 T ECO V3 TV.1 EH / TV.1 EHC leno BA4 R + leno Refill V1 T W V2 WM FL LT 1 A 1 B S wm S in2sin1 S out TV.1_E, TV.1_EC Sin1 Sin2 Sout Ts min C Ts max C TV_4 TV_6 TV_8 TV_10 TV_14 dpu min bar 1 1,5 2 3,5 5,5 dpu max bar 2,5 3,5 4,5 6,5 10 TV.1_EH, TV.1_EHC Sin1 Sin2 Sout Ts min C Ts max C
8 DLV TV.2 E (C) (H) Optional leno / leno Refill leno BA4 R TecBox TU / TG TU..E / TG..E Transfero TV.2 E(H)(C) Statico SD/SU TV 4_, TV 6_, TV 8_ : SD/SU 50 l TV 10_, TV 14_ : SD/SU 80 l leno AB 5 Sin1 Sout Sin2 T SYS leno AB5 R + leno Refill TV 10/14 T ECO V3 leno BA4 R + leno Refill V1 T W V2 WM FL LT 1 A 1 B S wm S in2 S in1 S out TV_4 TV_6 TV_8 TV_10 TV_14 dpu min bar 1 1,5 2 3,5 5,5 dpu max bar 2,5 3,5 4,5 6,5 10 TV.2_EH, TV.2_EHC Sin1 Sin2 Sout Ts min C Ts max C
9 tr 70 C TV.1 E + leno BA4 R ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Statico SD/SU Sout Sin1 Zeparo G Force TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 DLV pw 2-10 bar tw 5-65 C Transfero Connect TecBox TU/TG tr 70 C TV.1 E + leno AB5 R + leno Refill ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Statico SD/SU Sout Sin1 Zeparo G Force DLV TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 pw 2-8 bar tw 5-30 C Transfero Connect TexBox TU/TG 9
10 70 C < tr 90 C TV.1 EH / TV.2EH + leno BA4 R + leno Refill ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Sout Sin1 Zeparo G Force Statico SD/SU TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 DNd DLV pw 2-8 bar tw 5-30 C Transfero Connect TecBox Sin2 DD/DU/DG TU/TG TUE/TGE tr 70 C TV.1 EH / TV.2EH + leno AB5 R + leno Refill ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Sout Statico SD/SU Zeparo G Force TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 DLV DNd Sin1 Sin2 pw 2-8 bar tw 5-30 C Transfero Connect TecBox TU/TG TUE/TGE 10
11 5 C tr 70 C TV.1 EC + leno AB4 R + leno Refill ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Statico SD/SU Sout Sin1 Zeparo G Force DLV TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 pw 2-8 bar tw 5-30 C Transfero Connect TexBox TU/TG 0 C tr 5 C TV.2EHC + leno BA4 R ZUT tmax DSV...DGH Hst Q psvs tr > 500 mm Sout Sin1 Statico SD/SU Zeparo G Force DNd TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 DLV Sin2 pw 2-10 bar tw 5-65 C Transfero Connect TecBox DD/DU/DG TU/TG TUE/TGE 11
12 5 C tr 70 C TV.2EHC + leno AB5 R + leno Refill ZUT tmax DSV...DGH Hst svs Q tr > 500 mm Sout Statico SD/SU Zeparo G Force DLV TV 4_, TV 6_, TV 8_ : SD/SU 50 TV 10_, TV 14_ : SD/SU 80 DNd Sin1 Sin2 pw 2-10 bar tw 5-30 C Transfero Connect TexBox TU/TG TUE/TGE 12
13 TV_4.1 TV_4.1 H TV_4.2 H TV_6.1 TV_6.1 H TV_6.2 H TV_8.1 TV_8.1 H TV_8.2 H TV_10.1 TV_10.1 H TV_10.2 H TV_14.1 TV_14.1 H TV_14.2 H Length up to approx. 5 m Length up to approx. 10 m Length up to approx. 30 m Hst m all all all all all < all all < 27 all < 29 < 44 all all < DNd Hst m all all all all all all all all all all all all all all all Hst m all all <13 13 all < 23 < 25 all < 24 < all < 40 < 52 all all < DNd Hst m all all all all all all all all all all all all all all all Hst m all all all all < < 22 all < 28 < 30 all < < 48 all < 80 < DNd Hst m all all all all all all all all all all all all all all all qwm > 1300 l/h S wm qwm < 1300 l/h 13
14 1 x 230V T.1: 10A / 3 x 1,0 mm 2 T.2: 16A / 3 x 1,5 mm 2 # L 1! E N 3 4 L E N 5 6 T.1 = 10A T.2 = 16A BrainCube Connect! 14
15 230 V F201 Version TV.2,TV.1H Sicherung/ fusible/ fuse 10 A / 250V / 5x20 Sicherung/ fusible/ fuse 10 A / 250V / 5x20 F200 Klemmen Ausführung TV Version des bornes TV Terminal execution TV 230 V 50 Hz LINE /C1 V1 V3 V4 WM V2 /C2 OD1OD2 OD3 OD4 L N E L N E L N E L N E L N E L N E L N E Achtung: Fremdspannung BU GNYE BU GNYE BU GNYE BU GNYE BU GNYE BU GNYE BU GNYE Attention: tension externe Attention: external voltage G erätestecker Fiche Main plug 16 A M 1 ~ M 1 ~ C NO C NO C NO *A *A max. 2A Leitungsabsicherung bauseits rotection de la ligne max. 2A par l `installateur max. 2A line protection by c ontractor Netzversorgung Alimentation electrique Network supply 230V/50 Hz TV.1: 10A / 3 x 1,0 mm² TV.2: 16 A / 3 x 1,5 mm² 1 umpe ompe ump V1 Ü berströmv entil V anne de decharge Spill valve V3 umpenv entil V annes de pompe ump valve WM Nachspeisev entil V anne d`appoint d`eau Water make up valve V2 Ü berströmv entil V anne de decharge Spill valve Version H TV.1H, TV.2 2 umpe ump ompe V ersion TV.2 Meldungen Gebäudeleittechnik rogrammierbar, Zuordnung nach Menü arameter Report de messagevers la GTC, affection siuvant menu-parametres B uilding control reports, allocation acc. to menu-parameter Version TV.2 24 V Klemmen Ausführung TV Version des bornes TV Terminal execution TV SELV GND IN + GND IN + GND IN + GND IN GND IN GND IN GND IN H- H+ GND IN + E E E E SHIELD WH GN GN GY WH GN K BL GN IA5 IA4 IA3 IA2 IA1 ID4 ID3 ID2 ID1 OA2 OA1 IDA2 IDA1 OUT + OUT + OUT + M1 OUT + S ensor S ensor S ensor Anlagendruck Gefässinhalt Vak uum LT T W T SYS C apteur de C apteur de C apteur de n iveau LT vacuum pression Level sensor T W T SYS LT Vac uum ressure s ensor T W s ensor TSYS Motorkugelhahn Gefäss M1 R obinet à boisseau sphérique motorisé vase M1 Motorized ball valve vessel M1 ECO Schalter T ECO C ontacteur Eco T ECO Eco switch T ECO 15
16 We reserve the right to introduce technical alterations without previous notice.
Transfero Connect TV 4-14 INSTALL
en de fr nl SAFETY INSECTION DISASSEMBLING prescriptions 2 SAFETY INSECTION ersonnel Installing and operating personnel must possess the appropriate knowledge and training. Follow the instructions Installation,
More informationZeparo G-Force. Automatic air vents and separators Microbubble, dirt and magnetite separator with Cyclonic technology
Zeparo G-Force Automatic air vents and separators Microbubble, dirt and magnetite separator with Cyclonic technology IMI PNEUMATEX / Air Vents, Dirt Separators and Degassing / Zeparo G-Force Zeparo G-Force
More informationCompresso. Pressure maintenance systems with compressors. engineering ADVANTAGE
Compresso Pressure maintenance systems with compressors Pressurisation & Water Quality alancing & Control hermostatic Control engineering ADVANAE Compresso is a precision pressurisation system with compressors
More informationTA-6-way valve. Standard control valves 6-way valve for change-over systems
TA-6-way valve Standard control valves 6-way valve for change-over systems IMI TA / Control valves and Actuators / TA-6-way valve TA-6-way valve The 6-way valve solution enables various control set-ups
More informationDynacon. Floor Heating Manifolds Floor heating manifold with automatic flow control
Dynacon Automatic Flow Control Floor Heating Manifolds Floor heating manifold with automatic flow control IMI HEIMEIER / Floor Heating Control / Dynacon Dynacon Dynacon adjusts the flow rate in the individual
More informationEMOtec. Actuators Thermal actuator for heating, ventilation, and air conditioning systems
EMOtec Actuators Thermal actuator for heating, ventilation, and air conditioning systems IMI HEIMEIER / Thermostats & Actuators / EMOtec EMOtec The EMOtec thermal actuator with position indicator (NC)
More informationThese installation and maintenance instructions must be read in full and completely understood before the installation!
These installation and maintenance instructions must be read in full and completely understood before the installation! 1. General information on the installation and maintenance instructions These instructions
More informationTA-6-way valve. NPT threads. Standard control valves 6-way valve for change-over systems
T-6-way valve NPT threads Standard control valves 6-way valve for change-over systems IMI T / Control valves / T-6-way valve NPT threads T-6-way valve NPT threads The 6-way valve solution enables various
More informationScrew Pumps Series SPF
Screw umps Application For the delivery of fuel oils, lube oils, hydraulic oils or other lubricating liquids. The fluid media must not contain any abrasive particles nor attack the pump materials chemically.
More informationTA-PILOT-R. Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point
TA-PILOT-R Differential pressure controllers Pilot operated differential pressure controller with adjustable set-point IMI TA / Differential pressure controllers / TA-PILOT-R TA-PILOT-R The TA-PILOT-R
More informationNEOTECHA NTB-NTC BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood 2 SAFETY Please also read through these notes carefully. 2.1 General potential danger due to: a. Failure to observe the instructions
More informationSelf-regulating frost protection system for pipes
AT-TS-13 60 30 90 0 C 120 Self-regulating frost protection system for pipes eliability: protects your pipes from frost damage Maintenance-free Efficient energy use FS-A-2X: 10 W/m at 5 C FS-B-2X: 26 W/m
More informationReflex ex separator. Exvoid / Exvoid HC (HiCap) Exdirt / Exdirt HC (HiCap) Extwin /Extwin HC (HiCap) Operating manual
Reflex ex separator Exvoid / Exvoid C (icap) Exdirt / Exdirt C (icap) Extwin /Extwin C (icap) 21.11.2016 GB Operating manual English Refle x ex sep ar ato r Contents 21.11.2016 Contents 1 Safety... 4
More informationDrive electronics pq11
Drive Electronics pq 11 Plug-in type amplifier for proportional valves Output current for solenoids: 0... 1000 ma or 0... 2400 ma Catalog Register A17, P17, H17 Publication 7502961.06.11.96 Description
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationFrost protection for pipes. 16 Technical handbook. Thermostat with line or ambient temperature sensor
Frozen pipes can be a costly problem. When pipes are exposed to subzero temperatures they can burst, leading to considerable damage and disruption. The Raychem frost protection system provides an efficient
More informationRescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference
Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationPro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationSTAF, STAF-SG. Balancing valves PN 16 and PN 25 DN
STAF, STAF-SG Balancing valves PN 16 and PN 25 DN 20-400 IMI TA / Balancing valves / STAF, STAF-SG STAF, STAF-SG A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing valve that delivers accurate
More informationFLÄKTGROUP PM-MOTOR WITH INTEGRATED FC 106 FREQUENCY CONVERTER
FLÄKTGROUP PM-MOTOR WITH INTEGRATED FC 106 FREQUENCY CONVERTER INSTALLATION AND MAINTENANCE INSTRUCTIONS Risk of electric shock: Motor terminals may still be live if the impeller is rotating, even when
More informationInstallation instruction
1 Safety Before installing the device, please read this manual carefully. Please note that the installation must be executed according to relevant technical rules. The installation must also be adapted
More informationHOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009
HOT WASHER MODEL NO: KING 125 PART NO: 7320170 OPERATION & MAINTENANCE INSTRUCTIONS LS1009 INTRODUCTION Thank you for purchasing this Hot Washer. This machine is a portable, high pressure power washer,
More informationProduct Data Sheet 4118 N/ The engineer's choice
The engineer's choice 4118 N/12-190 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Operating Data - Electrical
More informationTA-FUS1ON-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUS1ON-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUS1ON-P TA-FUS1ON-P These innovative
More informationProduct Data Sheet 4184 N/17X. The engineer's choice
Product Data Sheet 4184 N/17X The engineer's choice 4184 N/17X INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Electrical Operating Data... 4 3.2 Electrical
More informationOil-free piston compressors KK and piston vacuum pumps KV
Oil-free piston compressors KK and piston vacuum pumps KV Installation and Operating Instructions 0678106030L02 1707V003 Contents Important information 1 About this document 2 1.1 Warnings and symbols
More informationEMO TM. Actuators High performance proportional actuator For modulating control
EMO TM Actuators High performance proportional actuator For modulating control IMI TA / Actuators / EMO TM EMO TM A proportional thermoelectric actuator which, when used together with the TA-Modulator,
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More informationTHERMAL MANAGEMENT
DESIGN GUIDELINES XL-TRACE LSZH SELF-REGULATING HEATING CABLES FOR PIPE FREEZE PROTECTION SYSTEMS THERMAL MANAGEMENT WWW.PENTAIRTHERMAL.COM PIPE FREEZE PROTECTION SYSTEM OVERVIEW SBS Control Panel T-Connection
More informationSBS Manual for the specialised craftsman. Filling and flushing station. Connection Operation. en Manual
SBS 2000 Filling and flushing station Manual for the specialised craftsman Connection Operation Thank you for buying this RESOL product. Please read this manual carefully to get the best performance from
More informationQuick-Disconnect Coupling one-hand operation Push Pull ND 5, connecting thread G 1/4,max. operating pressure 500 bar
Issue 12-2013 Quick-Disconnect Coupling one-hand operation Push Pull ND 5, connecting thread G 1/4,max. operating pressure 500 bar Figure 1: Coupling complete Figure 4: Coded coupling, complete Table of
More informationproduct specification
4414 ML Customer specification: No Version: 1.0 Created: 16.09.2011 INDEX 1 General... 2 2 Mechanics... 2 2.1 GENERAL... 2 2.2 MOTOR... 2 2.3 CONNECTIONS... 3 3 Operating Data... 4 3.1 OPERATING DATA -
More informationMake sure that no hazardous fumes can build up in the piping and in the meter during commissioning, decommissioning and dismantling.
The device and its accessories must only be used for their intended purpose and comply with safety regulations. Aquametro devices are manufactured according to valid standards and guidelines. Aquametro
More informationOperating instructions Safety sensor BNS About this document. Content. 6 Disassembly and disposal 6.1 Disassembly Disposal...
Safety sensor BNS Disassembly and disposal. Disassembly..... Disposal... EU Declaration of conformity Operating instructions.............pages to Original x.000 / 0.0 / v.a. - 09009- / J / 0-0-0 / AE-Nr.
More informationCondensation monitor
QXA2101 QXA2100 Condensation monitor QXA2100 QXA2101 Monitor to prevent damage caused by condensation on chilled ceilings and HVAC plants with AC/DC 24 V power. Can also be used with extension module AQX2000
More informationULTRASONIC FLOW SENSOR QALCOSONIC FLOW 2
AB AXIS INDUSTRIES ULTRASONIC FLOW SENSOR QALCOSONIC FLOW 2 TECHNICAL DESCRIPTION, INSTALLATION AND USER INSTRUCTIONS PESF2V01 KAUNAS Contents Page SAFETY INFORMATION... 1. APPLICATION FIELD... 2. TECHNICAL
More informationUltrasonic heat meter
Ultrasonic heat meter Installation and user guide Flow sensor-vmc-p Energy integrator Compact heat meter Temperature senor CONTENTS Kapitel Please read this manual prior to installation Page 3 2! T! Important
More informationDMP 331 DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
TEMATEC GmbH Postal address: House address Fon (+49) 0 4-870-0 Postbox 6 Löhestr. 7 Fax (+49) 0 4-870-0 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de TEMATEC GmbH Data Sheet DMP
More informationLithium Power Supply
Lithium Power Supply User Manual LPS 1200W-60Ah LPS 1500W-100Ah LPS 2500W-100Ah Compact lithium battery based power supply - for easy acces to 230V and 12V energy, everywhere! V1.1 Safety Instructions
More informationIU0U automatic charger Read these instructions carefully before the installation and commissioning and keep them in a safe place. Pass it on to the buyer in case of the further sale of the system. Contents
More informationABOVEGROUND TANKS PRODUCT RANGE, PG. 4 INSTALLATION, PG. 6 WARRANTY, PG. 7
T A N K S ABOVEGROUND TANKS PRODUCT RANGE, PG. 4 INSTALLATION, PG. 6 WARRANTY, PG. 7 100% reusable PE material Resistant to Nordic climate Good chemical resistance Safe to maintain Resistant to mechanical
More informationAlbeo TM LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series)
GE Lighting Installation Guide Albeo TM LED Luminaire Heavy Industrial High Bay Lighting (ABR1-Series) Features UL 1598 Suitable for Wet Locations IP66 Rated Ingress Protection BEFORE YOU BEGIN Read these
More informationBrabus SoundXtra for Mercedes-Benz GL350 BT X SX
Brabus SoundXtra for Mercedes-Benz GL350 BT X166-670-SX The product described in the instructions was developed, produced and checked considering the necessary safety requirements. In order to ensure a
More informationDIEMASOL A. Solar regulator. Installation instructions. Instructions for use. Technical instructions. English 06/01/06
DIEMASOL A Solar regulator English 06/01/06 Installation instructions Instructions for use Technical instructions Copyright All sections of these instructions for installation and use are protected by
More informationInstallation cable, PVC insulated. Characteristics Properties Unit. Power cables < 1 kv House wiring cable
According to VDE 0250 part 204 Characteristics Properties Unit Group Power cables < 1 kv Class House wiring cable Type material Cu, bare minal cross section conductor mm² Low smoke (acc. EN 61034-2) Diameter
More informationChargestar P24 / P32 Battery Charger Startmaster P300 Starter / Charger
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
More informationInstallation, Operating & Maintenance Instructions. Norbro J-Switch FM 00707
Installation, Operating & Maintenance Instructions Norbro J-Switch as FM 00707 INTRODUCTION The J-Switch is a control package incorporating switches, sensors or pneumatic valves for actuator end of travel
More informationAppendix: Safety and application notes for... 15
Contents Safety... 2 Warnings... 2 Symbols used in this manual... 2 Operator s safety... 2 Avoid filter module damage... 2 DC-link resonance... 2 Description... 3 Description... 3 Ordering numbers, 380-415
More informationProduct Data Sheet 3214 JH3-195
3214 JH3-195 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating Data... 6
More informationDMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
More informationQuick guide. Plug-in fans GPPM with FC101_106 August 2014
Quick guide Plug-in fans GPPM with FC101_106 August 2014 Fläkt Woods permanent magnet motors and speed controllers for plug fans GPPM 1. General Fläkt Woods offers a wide range of permanent magnet motors
More informationRESOL SBS 1000 * * Connection Operation
RESOL SBS 1000 Connection Operation FlowCon SBS 1000 A www.resol.de *48003820* 48003820 Thank you for buying this RESOL product. Please read this manual carefully to get the best performance from this
More informationFrost protection for pipes. 16 Technical handbook. Thermostat with line or ambient temperature sensor
Frozen pipes can be a costly problem. When pipes are exposed to subzero temperatures they can burst, leading to considerable damage and disruption. The Raychem frost protection system provides an efficient
More informationGrey cast iron SG iron Cast steel/ Forged steel High temperature steel Stainless steel Fig. 631 Page 2
CONA S Ball float steam trap Ball float steam trap Ball float steam trap PN16 / PN40 - with flanges (Fig. 631...1) - with screwed sockets (Fig. 631...2) - with socket weld ends (Fig. 631...3) - with butt
More informationSeries MNK-X, MNK-XB, SCK-X Frame-mounted Chemical Vortex Pumps
SUPPLEMENTARY INSTALLATION AND OPERATING MANUAL Translation of the original manual Series MNK-X, MNK-XB, Frame-mounted Chemical Vortex Pumps Keep for future use! This operating manual must be strictly
More informationElektric actuator MC50/24-C
Issue 2014-04-29 Operating manual 3.10-TA.150-15-EN Elektric actuator for KTM512, KTH512 DN15-50 Application Elektric actuator for 3-point or modulating controllers in heating systems. Positive connection
More informationInfocal 9 Energy calculator for heating and cooling applications
Installation & User Guide Infocal 9 Energy calculator for heating and cooling applications www.danfoss.com 2 Danfoss Energy Meters 2017.03 VUIGN102 1. Installation 1.1. Preparation Only qualified personnel
More informationAQUATOR Commercial Oil Water Separator Operating, Installation & Maintenance Manual
AQUATOR Commercial Oil Water Separator Operating, Installation & Maintenance Manual This Aquator Commercial Oil Water Separator (OWS) Operating and Maintenance Manual gives instructions for single-wall
More informationOMC-116 Installation manual
V1.02 January 2015 TDC-HB Revision History V1.01 August 2012 First release V1.02 January 2015 - Revised connection board. - -M - Heated Bracket option TDC HB 06-01-2015 installation manual page 2 of 11
More informationElectric Hi Lo Screen lift Trolley Mount 8960
Electric Hi Lo Screen lift 750 - Trolley Mount 8960 - Max Capacity 100kg - Min Capacity 5kg - Screens upto 86 WARNING! THIS IS NOT A TOY! WARNING! CHILDREN SHOULD NOT OPERATE LIFT OR HAVE ACCESS TO THE
More informationXenon Fiberoptic Lightsource
Xenon Fiberoptic Lightsource Operating Instructions for ASB-XE-175W Lightsource 2659A Pan American Frw N.E Albuquerque, New Mexico 87107 USA (English) Page 1 of 12 TABLE OF CONTENTS PAGE 1. INTRODUCTION
More informationInline Sampling Valves SSV Series, full-port design
SSV: Product Info 81 Inline Sampling Valves, full-port PM 81 M.00 e Inline Sampling Valves SSV Series, full-port design for safe and representative sampling of aggressive or even toxic liquids from pipelines
More informationInstallation and Operational Instructions for EAS - HTL housed overload clutch Sizes 01 3 Type 490._24.0
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:
More informationBA150E Diesel Driven Dewatering and Sewage Pump Max. 475 m3/hour, Max. 35 mwc
Pump specifications: Type... BA150E D285 Max. flow... 475 m3/hour (2091 US GPM) Max. pressure... 35 mwc (115 ft.) Connections... DN150 (6 ) Solids handling... 80 mm (3,15 ) Impeller type... Semi-open impeller
More informationFL 10 DIAPHRAGM PUMP INSTALLATION INSTRUCTIONS. Before operating the pump, please read the Installation Instructions and safety precautions.
FL 10 INSTALLATION INSTRUCTIONS DIAPHRAGM PUMP FL 10 DC-P FL 10 AC Before operating the pump, please read the Installation Instructions and safety precautions. Installation Instructions FL 10 Table of
More informationProduct Data Sheet DV4118 N
The engineer's choice DV4118 N INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Operating Data - Electrical Interface - Input... 5 3.2 Electrical Operating
More informationInfocal 9 Energy calculator for heating and cooling applications
Installation Guide Infocal 9 Energy calculator for heating and cooling applications www.danfoss.com 2 Danfoss Energy Meters 2018.08 VU.IG.N2.02 1. Installation 1.1. Preparation Only qualified personnel
More informationLEAD ACID BATTERY CHARGER
LEAD ACID BATTERY CHARGER MODEL NO: LA4 & LA6 OPERATION & MAINTENANCE INSTRUCTIONS LS1214 INTRODUCTION Thank you for purchasing this CLARKE Battery Charger. Please read this manual thoroughly, before attempting
More informationMagnetic switch For bypass level indicators Model BGU for nuclear power plants
Level measurement Magnetic switch For bypass level indicators BGU for nuclear power plants KSR data sheet BGU for NPP Applications Magnetic switches for detecting the limits of filling levels in bypass
More informationEMO T. Actuators High performance thermoelectric actuator For ON/OFF or PWM control
EMO T Actuators High performance thermoelectric actuator For ON/OFF or PWM control IMI TA / Actuators / EMO T EMO T Used in conjunction with small terminal valves e.g. TBV-C and TA-COMPACT-P or thermostatic
More informationSUPPLEMENTARY INSTALLATION AND OPERATING MANUAL Translation of the original manual. Series MNK-X, MNK-XB, SCK-X Frame-mounted Chemical Vortex Pumps
SUPPLEMENTARY INSTALLATION AND OPERATING MANUAL Translation of the original manual Series MNK-X, MNK-XB, SCK-X Frame-mounted Chemical Vortex Pumps Keep for future use! This operating manual must be strictly
More informationREX/REX F/REX K/REX K F REX DUAL/REX DUAL F
TECHNICAL MANUAL REX/REX F/REX K/REX K F REX DUAL/REX DUAL F PRESSURISED STEEL BOILERS INDEX 1 GENERAL WARNINGS... 4 2 TECHNICAL SPECIFICATIONS... 5 2.1 REX/REX K/REX F/REX K F 7-130 BOILER... 5 2.2 REX/REX
More informationFloat-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres. High temperature steel. Stainless steel.
Float-operated condensate pump ARI Condensate pump (mechanical) Displacement: 16,5-20 litres Condensate pump No electricity required / float-operated PN 16 (82.691) Body: Jacket P235GH-TC, Bottom flanges
More informationHANWEL NEDERLAND. flexible leidingen. Swivel joints
HANWEL NEDERLAND flexible leidingen Swivel joints HANWEL is your qualified partner in the field of flexible piping systems. The product range of HANWEL B.V. includes Swivel Joints Rotary Joints Complete
More informationCartridge Cleaning WorkStation. Item Code... SCC550 Item Code... SCC1000 Item Code... SCC550-E2
How to use your Cartridge Cleaning WorkStation Cartridge Cleaning WorkStation Item Code............ SCC550 Item Code............ SCC1000 Item Code............ SCC550-E2 Contents Cartridge Cleaning WorkStation
More informationUSER MANUAL FOR 2000 WATTS POWER INVERTER USER S MANUAL--Read before operating this equipment
USER MANUAL FOR 2000 WATTS POWER INVERTER Your 2000 watts power inverter converts 12-volt vehicle battery power into 230 volts of AC power. You can use the inverter in your vehicle to operate many types
More informationUHV Angle valve (Series 284) with pneumatic actuator, single acting with closing spring (NC)
UHV Angle valve (Series 84) with pneumatic actuator, single acting with closing spring (NC) This manual is valid for the valve ordering number(s): 84 85 The fabrication number is indicated on each product
More informationAsymmetrical Installation Instructions. Components: i2cove Asymmetrical LED Light Fixtures. 12 [305mm] [918mm] 48.
support@i2systems.com www.i2systems.com Electrical Specifications PARAMETER Input Power VALUE 8 Watts* / Ft Input Voltage 120-277V AC, 50/60 Hz Max. Fixture Run Length LED Color (CCT) 8 Watts: 120VAC:
More informationDA 50. Differential pressure controllers Adjustable set-point
DA 50 Differential pressure controllers Adjustable set-point IMI TA / Differential pressure controllers / DA 50 DA 50 These differential pressure controllers for heating and cooling systems are particularly
More informationDMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
More informationUsage Instructions of Solar Control for 3Way-Ball Valve
Table of Contents: Page: 2 Safety Instructions 3 Intended Use / General / Warranty / Installation: 4 Schematic Diagram: Mounting the sensor 5 Start-UP 6 Note: 7 Electrical connections: Technical Specifications
More informationSUBMERSIBLE DIRTY WATER PUMP
FOR USE WITH A 110V SUPPLY ONLY SUBMERSIBLE DIRTY WATER PUMP MODEL NO: DWP210A PART NO: 7230102 OPERATION & MAINTENANCE INSTRUCTIONS LS0115 INTRODUCTION Thank you for purchasing this CLARKE Submersible
More informationStorage, operating and maintenance instructions for AZ plug valves and Standard valves
ARMATUREN Plug - Valves metallic with PTFE Sleeve 2-7 way Storage, operating and maintenance instructions for AZ plug valves and Standard valves Plug - Valves FEP/PFA - lined, 2-3 way Butterfly - Valves
More informationVolute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
More informationSan Joaquin Valley Unified Air Pollution Control District Permit Services Division
San Joaquin Valley Unified Air Pollution Control District Permit Services Division Organic Liquid Storage Tanks Cleaning Requirements Approved By: Date: 2/20/08 David Warner Director of Permit
More informationSOS SERIES SOS1 SOS2. Spares On Site Battery Cabinet Installation Guide rEV3
Atlantic Battery Systems 1065 Market Street Paterson, NJ 07513 Phone: (800) 875-0073 Fax: (973) 523-2344 sales@atbatsys.com www.atbatsys.com SOS1 SOS2 SOS SERIES Spares On Site Battery Cabinet Installation
More informationInstruction Manual. Harmonic Filter AHF 005/010. Drives Solutions
Harmonic Filter AHF 005/010 Instruction Manual Drives Solutions Contents Safety... 2 Warnings... 2 Symbols used in this manual... 2 Operator s safety... 2 Avoid filter module damage... 2 DC-link resonance...
More informationProduct Data Sheet 3214 J/2H3F-191
The engineer's choice 3214 J/2H3F-191 INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 4 3.1 Operating Data - Electrical Interface - Input... 4 3.2 Electrical
More informationM843W3. GEM Series Sound Enclosure Assembly Instructions. Gulf Branch th Avenue NW. Southeastern U.S.A W Newport Center Dr
M843W3 GEM Series Sound Enclosure Assembly Instructions Corporate Headquarters Alaska Branch Office Southeastern U.S.A. East Coast Branch Gulf Branch 4420 14th Avenue NW 1200 West International 1419 W
More informationPHP-C Pressureless Expansion System Overview Description: The PHP-C balanced pressure expansion equipment is sized according to the total system volume and the boiler or chiller load. The PHP-C vessel
More informationDCT 533. Industrial Pressure Transmitter with IO-Link Interface. Stainless Steel Sensor
DCT 5 Industrial Pressure Transmitter with IO-Link Interface Stainless Steel Sensor accuracy according to IEC 60770: standart: ± 0.5 % FSO sption: ± 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0...
More informationHST-BL-2830MS & HST-BL-2830MS-USA
HST-BL-2830MS & HST-BL-2830MS-USA Release date: 02/2017 High - System - Technik Im Martelacker 12 D-79588 Efringen-Kirchen Phone 0 76 28-91 11-0 Fax 0 76 28-91 11-90 E-Mail: info@hs-technik.com Web: www.hs-technik.com
More informationUltra Sine Inverter (US) Generation 4 (G4) User Guide
IBS Intelligent Battery System GmbH Seestrasse 24, CH-3600 Thun, Schweiz Tel: +41 33 221 06 16 Fax: +41 33 221 06 17 E-Mail: info@ibs-tech.ch Ultra Sine Inverter (US) Generation 4 (G4) User Guide IBS-USG4_en_v2.0.3.doc
More informationKWT GALLEY WATER WASH HOOD GALLEY WATER WASH HOOD KWT. With supply air and Capture Jet technology
KWT GALLEY WATER WASH HOOD With supply air and Capture Jet technology APPLICATIONS Halton KWT is a galley water wash hood for use in marine & offshore applications. The highly efficient KWT hood uses Halton
More informationHAWLE-AIR RELEASE VALVES
HAWLE-AIR RELEASE VALVES HAWLE-AIR RELEASE VALVES Contents: Dimensions of Air Release Valve Page 2 Why use Air Release Valves? Page 3 Application: Potable water Air Release Valves, DN 1" - DN 2" Page 4
More informationInstallation Instructions Electronic pressure sensor. PX3111 PX322x PX323x PX3244 PX3422 PX911x PX913x
Installation Instructions Electronic pressure sensor PX PXx PXx PX PX PX9x PX9x 7057/06 0/0 Contents Safety instructions... Function and features... Installation...5 Electrical connection...5 5 Scale drawing...6
More informationHIB Enclosed Inverter User Guide
HIB Enclosed Inverter User Guide (0.75kW~22kW) V1.2.0 Contents 1 Safety information...1 2 Technical Data...2 3 Motor Connection...4 4 Operation...5 5 Single phase circuit diagram...7 6 Three phase circuit
More informationMeter FMT II. Operating manual. original operating manual. Translation of the
Operating manual Meter FMT II Item-No.: 253590000, 253590001, 253590003, 253590004, 253590006, 253590007, 253590008, 253590009, 253590010, 253590011, 253590012, 253590013, 253590020, 253590030, 253590031,
More informationSolar Thermal. Grant Solar Pump Station Installation & Servicing Instructions
Solar Thermal Grant Solar Pump Station Installation & Servicing Instructions Part No. DOC 96. Rev 02. October 2012 Important Note Important Note for Installers The Pump Station supplied with your Grant
More informationDMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up
More information