RHS301F. Accessories: Heatsinks. Main features. Description

Transcription

1 Accessories: Heatsinks Main features 0.28/W thermal resistance Suitable for mounting of 1-phase s or 3-phase s Integrated fan (115VAC or 2VAC) DIN rail mounting Dimensions W x H x D: 124 x 146 x mm RoHS compliant Description Heatsink assembly, including fan, suitable for mounting of maximum 2x 1- phase solid state relay () or 3-phase. Suffix H10 or H12 (for 115VAC or 2VAC fans respectively) added to part no. refers to factory mounted heatsink. Conditions apply. Please ask your sales representative for further details. 10/01/18 DS ENG 1

2 Structure 1-phase * Element Component Qty 1 heatsink assembly 1 Provided 2 Thermal Compound HTS02S 1 Provided 3 1-phase 45x59mm (max.) 2 Not provided 4 M5x10mm PZ2 + Washer (per ) 2 Provided (x4) Note: * 128mm for RK..C, 139mm for RK..P (including plug). Dimensions including the. When only 1 is utilized it shall be mounted at the centre of the heatsink. 10/01/18 DS ENG 2

3 3-phase Element Component Qty 1 heatsink assembly 1 Provided 2 Thermal Compound HTS02S 1 Provided 3 3-phase x74mm 1 Not provided 4 M5x10mm PZ2 + Washer (per ) 4 Provided (x4) Dimensions including the. 10/01/18 DS ENG 3

4 Features General max. mounting torque Weight (excl. ) Material Finish Fan mounting Fan supply voltage: 115C 2C Power consumption: 115C 2C Current consumption: 115C 2C 1.5Nm (13.3 lb-in) approx. 1635g Aluminium Black anodization Integrated 115VAC, /Hz 2-2VAC, /Hz /18 Watts /19 Watts 210 ma 125 ma Mounting position o o 10/01/18 DS ENG 4

5 Installation Fig. 1 Mounting on DIN rail Illustrations are for example only. Fig. 2 Dismounting from DIN rail 10/01/18 DS ENG 5

6 Recommended maximum current rating (per ) 1. The below recommendations are only valid when the assembly ( + heatsink) is mounted as shown in the mounting instructions unless otherwise indicated. 2. The indicated ratings are applicable to one, one pole. Please refer to the online selector tool at www. productselection.net for different load currents, surrounding temperatures or multiple units on one heatsink. 3. These recommendations are applicable only with the indicated Carlo Gavazzi thermal interface material between and heatsink. In case a different thermal interface is utilised these recommendations may no longer be valid. Pre-attached phase change pad, RKHT 2-pole RK 2.. (per pole) Thermal compound, HTS02S 3-phase RZ3A Ratings per pole Thermal pad, RZHT 3-phase RZ3A /01/18 DS ENG 6

7 Thermal compound, HTS02S 1-phase 1 RD RA..L RA..T RA RA RA2A.. (per pole) M M RS1A.. RS1A..E RM1A RM1B RM1C RM1A.. RM1B.. RM1C.. RM1E RAM1A.. RAM1B.. RM1E /01/18 DS ENG 7

8 Thermal pad, KK071CUT 1-phase 1 RD RA..L RA..T RA RA RA2A.. (per pole) M M RS1A RS1A..E RM1A RM1B RM1C RM1A.. RM1B.. RM1C.. RM1E RAM1A.. RAM1B.. RM1E /01/18 DS ENG 8

9 References CARLO GAVAZZI compatible components Purpose Component name/code Notes Thermal pads KK071CUT Packing qty. pcs, suitable for 1-phase s Thermal pads RZHT Packing qty. 10 pcs, suitable for 3-phase Phase change thermal pad RKHT Packing qty. 10 pcs, suitable for RK series Thermal compound HTS02S 2ml syringe of silicone based thermal compound Screw Kits SRWKITM5X10MM Packing qty. pcs. Fans 115, VAC, 2 VAC, 1mm including bracket Further reading Information Online heatsink selector tool Accessories Where to find it Order code C Enter the code entering the corresponding option instead of Code Option Description R - H - S F For 115VAC fan 2 For 2VAC fan C - COPYRIGHT 16 Content subject to change. Download the PDF: 10/01/18 DS ENG 9