STAINLESS STEEL BEARING
|
|
|
- Jodie Cameron
- 5 years ago
- Views:
Transcription
1 STAINLESS STEEL BEARING Århus Herlev Vejle
2 TABLE OF CONTENTS Technical information Stainless steel SUCP..6 6 Stainless steel SUCF Stainless steel SUCPA.10 Stainless steel SUCFL..12 Stainless steel SUCT 14 Stainless steel SUCFC.16 Stainless steel SUCFB.18 Stainless steel SUCFA.20 Thermoplastic SUCPPL..22 Thermoplastic SUCFPL..24 Thermoplastic SUCNFL.26 Thermoplastic SUCFBL.28 Thermoplastic SUCHPL.30 Thermoplastic SUCTPL.. 32 Thermoplastic SUCTBL Thermoplastic Covers/dæksler
3 TABLE OF CONTENTS Stainless steel bearing insert SUC Stainless steel bearing insert SSA Stainless steel bearing insert SSB Stainless steel bearing insert SS Stainless steel radial bearing SS Stainless steel radial bearing SS Stainless steel radial bearing SS6800(SS61800) Stainless steel radial bearing SS6900(SS61900) Stainless steel miniature bearing insert MUFL Stainless steel miniature bearing insert MUP Stainless steel miniature bearing insert SU000 MU Kataloger på vores hjemmeside
4 TECHNICAL INFORMATION Rolling bearing structure and feature Rolling bearing normally comprise bearing rings (inner ring and outer ring), rolling element and cage. Rolling elements are arranged between inner and outer rings, and cage to make sure the rolling elements in the correct relative position. This is arranged so that they do not contact each other. With this structure, a rolling motion is operational possible. The load of bearing is supported by the contact surface or point of rolling elements and rings. Stainless steel bearing materials EDB bearings in stainless steel materials are Inner and Outer rings, balls: A martensitic type, S440C, is highly resistant to perform under corrosive application. this is a straight chromium steel, and also provides maximum hardness and dimensional stability. Retainers and metal shields: Stainless steel S304 Rubber seals: Nitril rubber (standard) any others available upon request All SS bearings comes with food grease Mobil FM222 type. No standard: Upon request, Nylon cage retainer or ceramic balls type can be catered upon request. Bearing tolerance Bearing tolerance include both dimension tolerance and rotate tolerance. This bearing tolerance adapt: P0, P6, P5, P4 as well as ISO standard. They are comparing as follows: Comparison Of Tolerance: Standard code Tolerance GB P0 P6 P5 P4 ISO NORMAL CLASS CLASS6 CLASS5 CLASS4 SKF P0 P6 P5 P4 DIN P0 P6 P5 P4 JIS P0 P6 P5 P4 ANSI ABEC-1 ABEC-3 ABEC-5 ABEC-7 4
5 TECHNICAL INFORMATION SUCF 200 SUCP 200 SUCPA 200 SUCT 200 SUCFL 200 5
6 SUCP 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
7 SUCP 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d h a e b S1 S2 g w S kg Bearing NO. Housing NO. SUCP , ,7 0,75 SUC201 SP203 SUCP , ,7 0,75 SUC202 SP203 SUCP , ,7 0,75 SUC203 SP203 SUCP , ,7 0,73 SUC204 SP204 SUCP , ,3 0,91 SUC205 SP205 SUCP , ,9 1,32 SUC206 SP206 SUCP , ,5 1,72 SUC207 SP207 SUCP , , ,0 2,14 SUC208 SP208 SUCP , ,0 2,45 SUC209 SP209 SUCP , ,0 3,10 SUC210 SP210 SUCP , ,2 3,85 SUC211 SP211 SUCP , ,4 5,10 SUC212 SP212 SUCP , ,4 6,26 SUC213 SP213 SUCP , ,2 6,90 SUC214 SP214 SUCP , ,3 7,62 SUC215 SP215 SUCP , ,3 9,03 SUC216 SP216 SUCP , ,1 11,28 SUC217 SP217 SUCP , ,7 13,45 SUC218 SP218 7
8 SUCF 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
9 SUCF 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d a e i g L Bi S Bearing NO. Housing NO. SUCF ,5 33,3 12 SUC201 SF203 SUCF ,5 33,3 12 SUC202 SF203 SUCF ,5 33,3 12 SUC203 SF203 SUCF ,5 33,3 12 SUC204 SF204 SUCF ,8 12 SUC205 SF205 SUCF , ,2 12 SUC206 SF206 SUCF , ,4 14 SUC207 SF207 SUCF , ,2 16 SUC208 SF208 SUCF , ,2 16 SUC209 SF209 SUCF , ,6 16 SUC210 SF210 SUCF , ,4 19 SUC211 SF211 SUCF , ,7 19 SUC212 SF212 SUCF ,7 19 SUC213 SF213 SUCF ,4 19 SUC214 SF214 SUCF ,5 19 SUC215 SF215 SUCF ,3 23 SUC216 SF216 SUCF ,6 23 SUC217 SF217 SUCF ,3 23 SUC218 SF218 9
10 SUCPA 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
11 SUCPA 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d h a e b Bi g W f Bearing NO. Housing NO. SUCPA , M10 SUC201 SPA201 SUCPA , M10 SUC202 SPA202 SUCPA , M10 SUC203 SPA203 SUCPA , M10 SUC204 SPA204 SUCPA , , M10 SUC205 SPA205 SUCPA , , M14 SUC206 SPA206 SUCPA , , M14 SUC207 SPA207 SUCPA , , M14 SUC208 SPA208 SUCPA , , M14 SUC209 SPA209 SUCPA , , M16 SUC210 SPA210 SUCPA , , M16 SUC211 SPA211 SUCPA , , M16 SUC212 SPA212 SUCPA , , M16 SUC213 SPA213 11
12 SUCFL 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
13 SUCFL 200 SERIES E UNIT NUMBER Bore Dia (mm) d a e i b g L N E s Kg Bearing NO. Housing NO. SUCFL , ,5 11,5 33,3 12,7 0,56 SUC201 SFL203 SUCFL , ,5 11,5 33,3 12,7 0,56 SUC202 SFL203 SUCFL , ,5 11,5 33,3 12,7 0,56 SUC203 SFL203 SUCFL , ,3 12,7 0,52 SUC204 SFL204 SUCFL ,8 14,3 0,64 SUC205 SFL205 SUCFL ,2 15,9 0,93 SUC206 SFL206 SUCFL ,4 17,5 1,20 SUC207 SFL207 SUCFL ,2 19,0 1,59 SUC208 SFL208 SUCFL ,2 19,0 1,84 SUC209 SFL209 SUCFL ,6 19,0 2,15 SUC210 SFL210 SUCFL ,4 22,2 3,10 SUC211 SFL211 SUCFL ,7 25,4 3,99 SUC212 SFL212 SUCFL ,7 25,4 4,96 SUC213 SFL213 SUCFL ,4 30,2 5,60 SUC214 SFL214 SUCFL ,5 33,3 6,21 SUC215 SFL215 SUCFL ,3 33,3 7,69 SUC216 SFL216 SUCFL ,6 34,1 9,15 SUC217 SFL217 SUCFL ,3 39,7 10,95 SUC218 SFL218 13
14 SUCT 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
15 SUCT 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d o g p Q S b e a w h k L Bearing No. Housing No. SUCT SUC201 ST201 SUCT SUC202 ST202 SUCT SUC203 ST203 SUCT SUC204 ST204 SUCT SUC205 ST205 SUCT SUC206 ST206 SUCT SUC207 ST207 SUCT SUC208 ST208 SUCT SUC209 ST209 SUCT SUC210 ST210 SUCT SUC211 ST211 SUCT SUC212 ST212 SUCT SUC213 ST213 SUCT SUC214 ST214 SUCT SUC215 ST215 SUCT SUC216 ST216 SUCT SUC217 ST217 SUCT SUC218 ST218 15
16 SUCFC 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
17 SUCFC 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d a p e s z+j f kg Bearing No. Housing No. SUCFC , ,3 62 1,00 SUC201 SFC201 SUCFC , ,3 62 1,00 SUC202 SFC202 SUCFC , ,3 62 1,00 SUC203 SFC203 SUCFC , ,6 62 0,96 SUC204 SFC204 SUCFC , , ,24 SUC205 SFC205 SUCFC , , ,66 SUC206 SFC206 SUCFC , , ,11 SUC207 SFC207 SUCFC , , ,48 SUC208 SFC208 SUCFC , , ,35 SUC209 SFC209 SUCFC , , ,58 SUC210 SFC210 SUCFC , , ,07 SUC211 SFC211 SUCFC , , ,97 SUC212 SFC212 SUCFC , , ,50 SUC213 SFC213 SUCFC , , ,86 SUC214 SFC214 SUCFC , , ,59 SUC215 SFC215 SUCFC , , ,52 SUC216 SFC216 SUCFC , , ,46 SUC217 SFC217 SUCFC , , ,83 SUC218 SFC218 17
18 SUCFB 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
19 SUCFB 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d H i d c f e kø Bearing No. Housing No. SUCFB ,5 43,3 38, ,1 10 SUC201 SFB201 SUCFB ,5 43,3 38, ,1 10 SUC202 SFB202 SUCFB ,5 43,3 38, ,1 10 SUC203 SFB203 SUCFB ,5 43,3 38, ,1 10 SUC204 SFB204 SUCFB ,3 28,5 36,5 10 SUC205 SFB205 SUCFB ,4 47,6 31,7 40,9 10 SUC206 SFB206 SUCFB ,3 50,8 31,7 46,4 13 SUC207 SFB207 SUCFB , ,3 51,2 12 SUC208 SFB208 SUCFB ,9 51,2 12 SUC209 SFB209 SUCFB , ,3 53,6 13 SUC210 SFB210 19
20 SUCFA 200 SERIES STAINLESS STEEL Ring & Balls Slinger and Retainer Seal Housing Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Specifications and Approvals: Mobil FM222 Mobilgrease FM meets or exceeds the requirements of: FM 101 FM 222 FDA 21 CFR X X DIN (2006:06) KPF1K -20 KPF2K -20 Mobilgrease FM has the following builder approvals: FM 101 FM 222 MAG IAS, LLC P-72 P-64 Kosher/Parve X X Halal X X Mobilgrease FM is Registered to the requirement of: FM 101 FM 222 NSF H1 X X NSF Registration Number
21 SUCFA 200 SERIES STAINLESS STEEL UNIT NUMBER Bore Dia (mm) d a e b N1 + N N2 E kg Bearing No. Housing No. SUCFA ,3 0,48 SUC201 SFA201 SUCFA ,3 0,48 SUC202 SFA202 SUCFA ,3 0,48 SUC203 SFA203 SUCFA ,3 0,45 SUC204 SFA204 SUCFA ,8 0,64 SUC205 SFA205 SUCFA ,2 0,92 SUC206 SFA206 SUCFA ,4 1,27 SUC207 SFA207 SUCFA ,2 1,62 SUC208 SFA208 SUCFA ,2 1,84 SUC209 SFA209 SUCFA ,6 2,10 SUC210 SFA210 SUCFA ,4 2,16 SUC211 SFA211 21
22 SUCPPL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 22
23 SUCPPL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løst hus Bore Dia (mm) d h a e b s1 s2 g w Bi n bolt SUCPPL201 P204K 12 33, , ,7 M10 SUCPPL202 P204K 15 33, , ,7 M10 SUCPPL203 P204K 17 33, , ,7 M10 SUCPPL204 P204K 20 33, ,2 65, ,7 M10 SUCPPL205 P205K 25 36,5 140, , ,3 M10 SUCPPL206 P206K 30 42, , ,1 15,9 M12 SUCPPL207 P207K 35 47, ,5 42,9 17,5 M12 SUCPPL208 P208K 40 49, , ,2 19 M12 SUCPPL209 P209K ,2 19 M16 SUCPPL210 P210K 50 57, ,6 19 M16 23
24 SUCFPL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 24
25 SUCFPL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løs flange Bore Dia (mm) d a e g l s z i BI n SUCFPL201 F204K ,5 13,4 27, , ,7 SUCFPL202 F204K ,5 13,4 27, , ,7 SUCFPL203 F204K ,5 13,4 27, , ,7 SUCFPL204 F204K ,5 13,4 27, , ,7 SUCFPL205 F205K , ,3 SUCFPL206 F206K ,3 31, ,4 19,2 38,1 15,9 SUCFPL207 F207K ,5 34, ,9 21,5 42,9 17,5 SUCFPL208 F208K , , ,2 19 SUCFPL209 F209K , ,2 19 SUCFPL210 F210K , ,
26 SUCNFL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 26
27 SUCNFL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løs flange Bore Dia (mm) d a e b g l s z i n Bi SUCNFL201 FL204K ,4 26, ,7 15,4 12,7 31 SUCNFL202 FL204K ,4 26, ,7 15,4 12,7 31 SUCNFL203 FL204K ,4 26, ,7 15,4 12,7 31 SUCNFL204 FL204K ,4 26, ,7 15,4 12,7 31 SUCNFL205 FL205K ,5 13,5 29, , ,3 34 SUCNFL206 FL206K ,3 30, , ,9 38,1 SUCNFL207 FL207K ,1 32, , ,5 42,9 SUCNFL208 FL208K , ,7 21, ,2 SUCNFL209 FL209K , ,2 SUCNFL210 FL210K , ,6 27
28 SUCFBL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 28
29 SUCFBL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løs flange Bore Dia (mm) d a b c d e f g h l k n SUCFBL201 FB204K 12 76, ,1 42,9 33,7 22,2 11, ,5 10,7 12,7 SUCFBL202 FB204K 15 76, ,1 42,9 33,7 22,2 11, ,5 10,7 12,7 SUCFBL203 FB204K 17 76, ,1 42,9 33,7 22,2 11, ,5 10,7 12,7 SUCFBL204 FB204K 20 76, ,1 42,9 33,7 22,2 11, ,5 10,7 12,7 SUCFBL205 FB205K 25 85,7 63,5 41, ,7 28,6 11,4 120, ,7 14,3 SUCFBL206 FB206K ,6 52,4 41,2 31,8 13,3 138, ,7 15,9 SUCFBL207 FB207K ,8 60,3 46,8 31,8 16, ,1 17,5 29
30 SUCHPL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 30
31 SUCHPL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løs flange Bore Dia (mm) d a c h m t w Bi n Vægt (Kg) SUCHPL201 HPL204K ,5 63, ,7 0,15 M16 SUCHPL202 HPL204K ,5 63, ,7 0,15 M16 SUCHPL203 HPL204K ,5 63, ,7 0,15 M16 SUCHPL204 HPL204K ,5 63, ,7 0,15 M16 SUCHPL205 HPL205K ,5 63, ,3 0,16 M16 SUCHPL206 HPL206K , ,1 15,9 0,21 M16 SUCHPL207 HPL207K , ,9 17,5 0,25 M16 SUCHPL208 HPL208K , ,2 19 0,36 M16 SUCHPL209 HPL209K ,2 19 0,45 M20 SUCHPL210 HPL210K ,6 19 0,49 M20 Bolt 31
32 SUCTPL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 32
33 SUCTPL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løs flange Bore Dia (mm) d a c d h m t v w Bi n Vægt (Kg) SUCTPL201 TPL204K , ,7 0,16 M16 SUCTPL202 TPL204K , ,7 0,16 M16 SUCTPL203 TPL204K , ,7 0,16 M16 SUCTPL204 TPL204K , ,7 0,16 M16 SUCTPL205 TPL205K , ,3 0,17 M16 SUCTPL206 TPL206K , ,1 15,9 0,22 M16 SUCTPL207 TPL207K , ,9 17,5 0,26 M16 SUCTPL208 TPL208K , ,2 19 0,38 M16 SUCTPL209 TPL209K ,2 19 0,48 M20 SUCTPL210 TPL210K ,6 19 0,52 M20 Bolt 33
34 SUCTBL 200 SERIES THERMOPLASTIC HOUSE OTHER COLORS White Black Green 34
35 SUCTBL 200 SERIES THERMOPLASTIC HOUSE UNIT NUMBER DKC varenr. på løst hus Bore Dia (mm) d a b h m w Bi N Vægt (Kg) SUCTBL201 PA204K 12 33,3 34, ,8 72, ,7 0,13 M8 SUCTBL202 PA204K 15 33,3 34, ,8 72, ,7 0,13 M8 SUCTBL203 PA204K 17 33,3 34, ,8 72, ,7 0,13 M8 SUCTBL204 PA204K 20 33,3 34, ,8 72, ,7 0,13 M8 SUCTBL205 PA205K 25 36,5 39,5 73,5 50,8 76, ,3 0,15 M10 SUCTBL206 PA206K 30 42,9 42, , ,1 15,9 0,24 M10 SUCTBL207 PA207K 35 47,6 47, , ,9 17,5 0,28 M10 SUCTBL208 PA208K 40 49, ,5 88, ,2 19 0,39 M12 SUCTBL209 PA209K , ,2 19 0,47 M12 SUCTBL210 PA210K 50 57, , ,6 19 0,56 M16 bolt 35
36 THERMOPLASTIC UNITS COVERS 36
37 STAINLESS STEEL BEARING INSERT SSUC200 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) BEARING NUMBER DIMENSIONS (mm) BASIC LOAD RATINGS (kn) Bore Dia D Bi Be N M G Basic load Rating Basic static rating (mm) d SSUC ,7 18,3 4,7 10,37 5,08 SSUC ,7 18,3 4,7 10,37 5,08 SSUC ,7 18,3 4,7 10,37 5,08 SSUC ,7 18,3 4,7 10,37 5,08 SSUC , ,3 19,8 5 11,31 6,00 SSUC , ,9 22,2 5 15,81 8,64 SSUC , ,5 25,4 6 20,83 11,68 SSUC , ,2 8 23,55 13,60 SSUC , ,2 8 26,35 15,60 SSUC , , ,48 18 SSUC , ,2 33, ,28 22,4 SSUC , ,4 39, ,50 26,34 SSUC , ,4 39, ,50 30,4 SSUC , ,2 44, ,15 33,6 SSUC , ,3 44, ,55 37,6 SSUC , ,3 49, ,65 40,8 SSUC , ,1 51, ,00 48,8 SSUC ,7 56, ,52 54,56 37
38 STAINLESS STEEL BEARING INSERT SSA200 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) BEARING NUMBER DIMENSIONS (mm) BASIC LOAD RATINGS (kn) Bore D Bi Be L W K Dyn static Dia (mm) d SSA , ,6 28,6 13,5 7,84 3,58 SSA , ,6 28,6 13,5 7,84 3,58 SSA , ,6 28,6 13,5 7,84 3,58 SSA , ,3 13,5 10,37 5,04 SSA , ,1 13,5 11,31 5,97 SSA , ,7 44,5 15,9 15,73 8,64 SSA , ,9 55,6 17,5 20,83 11,68 SSA , ,7 60,3 18,3 23,55 13,6 SSA , ,7 63,5 18,3 26,44 19,56 SSA , ,7 69,9 18,3 30,01 22,53 SSA , ,4 76,2 20,7 32,39 24 SSA , ,1 84,2 22,3 35,28 26,18 38
39 STAINLESS STEEL BEARING INSERT SSB200 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) BEARING NUMBER DIMENSIONS (mm) BASIC LOAD RATINGS (kn) Bore D Bi N M G ds Dyn static Dia (mm) d SSB ,5 M5X0,8 7,82 3,58 SSB ,5 M5X0,8 7,82 3,58 SSB ,5 M5X0,8 7,82 3,58 SSB ,5 M6X0,75 10,37 5,04 SSB ,5 19,5 5 M6X0,75 11,31 5,97 SSB ,5 M6X0,75 15,73 8,64 SSB ,5 23,5 6 M8X1 20,83 11,68 SSB M8X1 23,55 13,6 SSB ,2 10, M8X1 26,44 19,56 SSB ,5 10,9 32,6 9 M8X1 30,01 22,53 SSB ,8 33,5 10 M10X1,25 32,39 24 SSB ,7 14,9 38,8 10 M10X1,25 35,28 26,18 39
40 STAINLESS STEEL RADIAL BEARING SS6000 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Bearing NO. I.D O.D W Load Rating (kgf) Max Speed d D B Dynamic Static Grease mm inch mm inch mm inch Cr Cor r/min Weight Kg SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
41 STAINLESS STEEL RADIAL BEARING SS6000 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Bearing NO. I.D O.D W Load Rating(kgf) Max Speed d D B Dynamic Static Grease mm inch mm inch mm inch Cr Cor r/min Weight Kg SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
42 STAINLESS STEEL RADIAL BEARING SS6300 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Bearing NO. I.D O.D W Load Rating(kgf) Max Speed d D B Dynamic Static Grease mm inch mm inch mm inch Cr Cor r/min Weight Kg SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS SS
43 STAINLESS STEEL RADIAL BEARING SS6800 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) SS68.. = SS618.. (eks. SS6805-2RS = SS RS) Bearing I.D O.D W Load Rating (kgf) Max Speed Weight Kg NO. d D B Dynamic Static Grease mm inch mm inch mm inch Cr Cor r/min SS SS SS SS SS SS SS SS SS SS SS
44 STAINLESS STEEL RADIAL BEARING SS6900 SERIES Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) SS69.. = SS619.. (eks. SS6905-2RS = SS RS) Bearing I.D O.D W Load Rating (KN) Max Speed Weight Kg NO. d D B Dynamic Static Grease mm inch mm inch mm inch Cr Cor r/min
45 STAINLESS STEEL MINIATURE FLANGE-BEARING MUFL Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Bore Dia (mm) d Unit No. Dimensions (mm) a e s b Z L 10 MUFL ,5 12 MUFL ,5 15 MUFL ,5 18,5 17 MUFL ,5 20,5 20 MUFL ,5 24,5 25 MUFL ,5 25,5 30 MUFL ,5 45
46 STAINLESS STEEL MINIATURE PILLOW BLOCK-BEARING UNIT MUP Ring & Balls Slinger and Retainer Seal Tolerance Bearing-grease Nitril rubber (NBR) P0 (ABEC1) Mobil FM222 food grease (FDA) Bore Dia (mm) d Unit No. Dimensions (mm) h a e b s g w L 10 MUP ,5 12 MUP ,5 15 MUP ,5 17 MUP ,5 20 MUP ,5 25 MUP ,5 30 MUP ,5 46
47 STAINLESS STEEL MINIATURE BEARING INSERT SU000 MU000 Ring & Balls Slinger and Retainer Seal Nitril rubber (NBR) Eccentric Collar Locking Nylon Retainer Contact Seal Spherical O.D. Prelubricated / Non-relubricatable Tolerance Bearing-grease P0 (ABEC1) Mobil FM222 food grease (FDA) Bearing no. SU000 MU000 SU001 MU001 SU002 MU002 SU003 MU003 SU004 MU004 SU005 MU005 SU006 MU006 d mm D mm L mm Bi mm Be mm r mm n mm k mm W mm ds mm Load Rating dyn.c kn Load Rating stat.c0 kn Speed Limit RPM weight kg , ,5 4 8,5 17 M4x0,7 4,00 1, , , ,5 4 8,5 19 M4x0,7 4,40 1, , , ,5 4,5 8,5 22 M4x0,7 4,85 2, , ,5 13,5 10 0,5 5 9,5 25 M4x0,7 5,20 2, , ,5 16, M5x0,8 8,10 4, , ,5 17, M5x0,8 8,75 4, , ,5 18,5 13 1,5 6, M5x0,8 11,50 6, ,186 47
STAINLESS STEEL BEARING CATALOGUE
STAINLESS STEEL BEARING CATALOGUE A/S DANSK KUGLELEJE CENTER Tlf. 44 843 388 dkc@dkc-as.dk TABLE OF CONTENTS Technical information.. 4 4 Stainless steel SUCP..6 6 Stainless steel SUCF.....8 8 Stainless
STAINLESS STEEL BEARING. second edition. Århus Herlev Vejle
STAINLESS STEEL BEARING second edition TABLE OF CONTENTS M. Wilhelmsen History 1 Stainless steel SUCP..2 Stainless steel SUCCF...4 Stainless steel SUCPA 6 Stainless steel SUCFL.8 Stainless steel SUCT 10
SNR - Industry. SNR Stainless Steel Ball Bearing Units INDUSTRY
SNR - Industry SNR Stainless Steel Ball Bearing Units General More Nos than paliers 35 years s alignent of experience sur toutes vos attentes. SNR has been a leading manufacturer of housed bearings for
Trumbull Industries Miter Gear
Trumbull Industries Miter Gear Installation, Operation and Maintenance Manual Installation: The Trumbull Industries Miter Gear must be mounted to a structure close to the valve using one of the mounting
TABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar
Since 001, GR earings, a 100% Canaian family owne company, has been a successful bearing supplier to Distributors an OEMs across Canaa. Our bearings are mainly importe from carefully selecte manufacturers
Corrosion Resistant Mounted Units and Ball Bearings to endure ANY extreme activity.
Corrosion Resistant Mounted Units and Ball Bearings to endure ANY extreme activity. www.rbibearing.com STAINLESS STEEL MOUNTED S Stainless Steel and Thermoplastic Corrosion Resistant Mounted Units. Two
Triple-Sealed Bearings for Bearing Units
For New Technology Network corporation R Triple-Sealed Bearings for Bearing Units @ NTN Triple-Sealed Bearings for Bearing Units These reliable triple-sealed bearings are dustproof and waterproof. They
*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings
Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.
Single direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
Marathon series corrosion resistant products
Marathon series corrosion resistant products Contents 2 Introduction 6 End covers 8 Composite units 22 Stainless steel take-up frames 24 Cast stainless steel units 28 ZMaRC-coated insert bearings Stainless
QCB Thermoplastic Bearing Units
QCB Thermoplastic Bearing Units CAT TP 2017 E Ver1 NBC Group Ltd In the interest of continuing improvement, NBC Group Ltd reserves the right to modify any product or specification without prior notice.
Table of Contents Super Precision Machine Tool Bearings
Introduction Spherical Tapered Roller Roller Roller Table of Contents Machine Tool INTRODUCTION About NSK Machine Tool...............183 NOMENCLATURE/INTERCHANGE Angular Contact.......184 Roller......186
Introduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
B L PRECISION BEARINGS RADIAL BALL & M O U N T E D U N IT CATALOG
Catalog No. 0810 Section 1 Deep Groove Ball Bearings Features.............................................2 6000 Series Radial Ball Bearings Extra Light Duty.......................................4 6200
SEALED SPHERICAL ROLLER BEARING
SEALED SPHERICAL ROLLER BEARING McGILL SPHERE-ROL BEARINGS Invented in 1967, SPHERE-ROL bearings utilize a single row of rollers which provide a wide variety of advantages. High capacities, high limiting
Motion Technologies Bearing Products
Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular
Our Warranty, Your Satisfaction.
Our Warranty, Your Satisfaction. Since 200, GRB Bearings, a 00% Canadian family owned company, has been a successful bearing supplier to distributors and OEMs across Canada. Our bearings are mainly imported
DEEP GROOVE BALL BEARINGS
DEEP GROOVE BALL BEARINGS MOVING THE WHEELS OF THE INDUSTRY ABOUT NRB INDUSTRIAL BEARINGS LIMITED NRB Industrial Bearings Ltd is the industrial arm of the NRB Group. We manufacture bearings for various
SECTION 1. Basic Information
SECTION 1 SECTION 1 This section covers both the basic technical information governing bearing selection and the part numbering system used in this catalog. When the part numbering is different from the
M24X
Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:
Drawn cup needle roller bearings
Drawn cup needle roller bearings Sealed drawn cup needle roller bearings... 78 Full complement drawn cup needle roller bearings... 79 3 Dimensions... 79 Tolerances... 79 Misalignment... 80 Cages... 80
Ballscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T
Ballscrews An ideal drive mechanism where constant motion or high frequency cycling is required. Ballscrews provide highly efficient transmission with low starting torque, smooth running and quiet operation.
SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS
SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS Design Single row full complement cylindrical roller bearings suit locations with high radial load and lower revolution frequencies, comparing to
TECHNICAL INFORMATION
Bearing s In the United States, the American Bearing Manufacturers Association (ABMA) maintains the standards deemed necessary by its industry member companies This includes revising existing, or proposing
10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS
BEARING, SHAFTS, CLAMPS, COLLARS & HUBS Table of Contents HUBS Gear, Dial and Sprocket Assembies - Tech Info.....MI 2 Phase Adjustable Hub........................MI 3 Quick-2-Lock Hub..........................MI
CATALOG
www.craft-bearings.com CATALOG The contents of this catalog are subjected to change without prior notice. Every possible effort has been made to ensure that the data here in is correct; however, CRAFT
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS
UC-SERIES TIMKEN BALL BEARING HOUSED UNITS UC-SERIES TIMKEN BALL BEARING HOUSED UNITS Introduction...3 Features...4 Housing Styles...5 Nomenclature...6 Technical Data...7 Installation...4 HOUSED UNIT TABLES
10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
MTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
14 Track runner bearings
14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers
NICE Unground Industrial Product
Nice Ball Bearings In 902, William Nice founded one of the first anti-friction bearing manufacturers. Starting with unground ball bearing types and progressing into fully ground types, NICE today produces
Specialty Ball Bearings
Specialty Ball Bearings Providing custom-engineered bearing solutions to industry for over 100 years ISO 9001:2000 www.rbcbearings.com 800.390.3300 RBC Bearings Incorporated (RBC Bearings, RBC) has had
SLIM - SPLIT - BEARING
SLIM - SPLIT - BEARING Type series PBXU Type series PBXC Type series PBAC Type series PFXC Type series PFAC Type series HFXD Type series PBDV Type series YKT Publication DRL 100 E 09/2004 Index Page 2
FLANGED TYPE LINEAR BEARINGS
FLANED TYPE LINEAR BEARINS Inch and Metric Recirculating Ball SQUARE FLANE (SF) ROUND RANE (RF) Requires no housing, thus reducing costs Requires little installation space Ensures high accuracy upon replacement
INSOCOAT bearing designs INSOCOAT bearings with coated outer ring INSOCOAT bearings with coated inner ring
INSOCOAT bearings INSOCOAT bearing designs... 913 INSOCOAT bearings with coated outer ring... 913 INSOCOAT bearings with coated inner ring... 913 Other INSOCOAT bearings... 913 Bearing data general...
TIMKEN DEEP GROOVE BALL BEARINGS
TIMKEN DEEP GROOVE BALL BEARINGS DEEP GROOVE BALL BEARING CATALOG INDEX DEEP GROOVE BALL BEARINGS Deep Groove Ball Bearing Range...1 Bearing Size Range...1 Standard 6000 Series...2 Thin-Section 61000 Series...6
Combined Bearing/Freewheel CSK CSK..2RS
Combined Bearing/Freewheel CSK CSK..2RS TYPE CSK CSK..2RS T ype CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease
TECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
Plastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
Bearings and Spacers
Bearings and Spacers Section Contents Ball Bearings P4...Page 12 2 Bronze Bearings...Page 12 3 Moulded Bearings...Page 12 4 Bearing Pre load Washers...Page 12 Bearing Spacers...Page 12 6 Technical Information...Page
BARDEN. Ball Screw Support Bearings
BARDEN Ball Screw Support Bearings BEARING NOMENCLATURE Series BSB Example: BSB2047DUH 0-9 Series L Example: L150HX205DBTT1500 0-9 SERIES TYPE Ball screw support bearing indicator. BSB Metric. L Inch.
SSRB range with prefix and suffix
SSRB range with prefix and suffix 21 Designations information There are two designation systems for SKF Explorer sealed spherical roller bearings. One identifies sealed bearings in the standard ISO dimension
Needle Roller Bearings
Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges
SKF stainless steel deep groove ball bearings. Reliable bearing solutions for corrosive environments
SKF stainless steel deep groove ball bearings Reliable bearing solutions for corrosive environments 2 Contents A A Product information SKF the knowledge engineering company... 4 B Recommendations Demanding
xirodur B180 Axial Ball Bearings Product Range
axial ball bearing xirodur B180 xial Ball Bearings Product Range Order key BB-510-B180-ES stainless steel balls glass balls GL = glass ES = stainless steel Material xirodur B180 Dimensions acc. to DIN
Stainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
Axial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
Tel +44 (0) Fax +44 (0)
Tel +44 (0)1235 815816 Fax +44 (0)1235 811234 E-mail oilite@bowman.co.uk Contents Page Company Profile 1-2 ISO Certificate 2 Product Pictures 3 Wrapped Bearings Technical Information 4 Wrapped Bearings
LH data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Support Units. FA Units
Support Units FA Units Sungil Support Units EK, EF Type Support Units BK, BF Type Support Units AK, AF Type Support Units FK, FF Type Support Units Support Units Sungil Support Units Lock Nut Joint Unit
contents Symbols and units in the catalog Engineering data
contents Symbols and units in the catalog Engineering data - 4 Deep groove ball bearings Series.. Series.. Series.. Series.. Series 3.. - Double-row angular contact ball bearings Series 3.. Series 33..
15E INSOCOAT bearings
15E INSOCOAT bearings Designs and variants............... 1206 INSOCOAT bearings with a coated outer ring......................... 1207 INSOCOAT bearings with a coated inner ring.........................
R. S. Impex. https://www.indiamart.com/r-s-impex/
+91-8048602491 R. S. Impex https://www.indiamart.com/r-s-impex/ We R.S. Impex are one of the leading Importers / dealers since two decades of many reputed brand accessories & spares for various machinery.
SPHERICAL ROLLER BEARINGS
SPHERICAL ROLLER BEARINGS Spherical roller bearing can bear heavy load,it has two row rollers,one common spherical raceway in outer ring, two raceway in the inner ring which inclined to a certain angle
Bearings and steel balls
Bearings and steel balls Deep groove ball bearings DIN 625 T1 P. 2-5 Deep groove ball bearings stainless steel DIN 625 T1 P. 2-15 Angular ball bearings DIN 628 T1 P. 2-17 Spindle bearings DIN 628 T1 P.
Thrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
Publication BCRKB.Rev00EN. RKB Europe SA 2018/07
BEARING CATALOGUE Publication BCRKB.Rev00EN RKB Europe SA 2018/07 Every care has been taken to ensure the accuracy of the information in the present document but no liability can be accepted fony errors,
Bearing Handbook for Electric Motors
Bearing Handbook for Electric Motors Prolong your life The life of your electric motors with INSOCOAT bearings from SKF. Conventional motor bearings get fried by the electrical current passing through
12.3 Full Roller Type, MSR Series
12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip
3 Angular contact ball bearings
3 Angular contact ball bearings Designs and variants.............. 476 Single row angular contact ball bearings... 476 Basic design bearings... 477 Bearings for universal matching.... 477 Double row angular
MM FIXED ADJUSTABLE PLATE FIXED ADJUSTABLE RADIAL AXIAL A B C D E
Hevi-Rail Roller Bearings and Linear Guideways SYSTEM MAX. STATIC COMBINED HEVI-RAIL BEARING WITH WELDED LOAD* GENERAL DIMENSIONS** BEARING FLANGE PLATE kn MM FLANGE FIXED ADJUSTABLE PLATE FIXED ADJUSTABLE
Maximum speed ratings are based on light loads and reflective of bore sizes: 1/2 =6000 RPM, 5/8 =5000 RPM, 3/4 =4500 RPM, and 1 =3500 RPM
8 Bearing selection Factors We recommend that testing be done in the actual operating environment to determine if a certain bearing unit is suitable for the application. Many variations can occur such
One-way Clutches Tension Pulleys, Bottom Roller Bearings
One-way Clutches Tension Pulleys, Bottom Roller Bearings One-way clutches One-way Clutches This is a compact and roller type one-way clutch which formed a cam face on its outer ring. (Available shaft diameter
Angular contact ball bearings
Angular contact ball bearings Single row angular contact ball bearings... 409 Double row angular contact ball bearings... 433 Four-point contact ball bearings... 451 Double row cam rollers... 463 405 Angular
SKF sealed high precision angular contact ball bearings for enhanced performance and extended service life
SKF sealed high precision angular contact ball bearings for enhanced performance and extended service life Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve
FAG Angular Contact Thrust Ball Bearings double direction
FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine
Ball Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
Cylindrical roller bearings for large electric motors
Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These
Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More... ..plastics
4. xiros........... Deep-Groove Ball Bearings, Axial, Multi-Axis, Shields and More.....plastics xiros xiros Application Examples Exciting applications can be viewed online at www.igus.eu/xiros-applications
LH data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Data Sheet o 50 mm JIS0K 448 mm 80 mm 530 mm Total Head m 027 mm Efficiency %
BSA PIE (Product Information Exchange)
BSA PIE (Product Information Exchange) PIE (Product Information Exchange) is an industry data sharing system. The Bearing Specialists Association developed a PIE Attribute Template and Instructions document
12.1 SINGLE ROW BALL BEARINGS
12.1 SINGLE ROW BALL BEARINGS Due to the versatility of applications, single row ball bearings are among the most frequently used types of rolling bearings. They are made as non-separable without a filling
FEATURES/BENEFITS. Setscrew Ball Bearings. DODGE End Covers
or over 70 years, DODGE has been talking to mounted bearing users and listening to their needs. This experience lead to the design of the optimum mounted ball bearing. A state-of-the-art facility was built
technology made in Italy RS RT
technology made in Italy RS RT * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission
Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
SKF precision bearings
SKF precision bearings Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve total quality in everything we do. For those who use our products, Made by SKF implies
Classification and Characteristics of Rolling Bearings
1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02
METRIC A-A-59584C 15 September 2008 SUPERSEDING A-A-59584B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02 The General Services
Single row angular contact ball bearing with 25 contact angle
Supplementary designations - suffixes It should be noted that the appearance of a suffix in the alphabetical list, which follows, does not mean that a particular variant is available. A AC Deviating or
bearings (metric series)
Taper roller bearings (metric series) 32302 B J2 / Q CL7C Nomenclature 1 2 3 4 1. Contact angle: 3. Features: B Larger contact angle than standard Q Improved friction torque characteristics and raceway
Wire ball bearing. Type Series KVE Type Series MVE Type Series ZVE Type Series KER Type Series KED Type Series KEDD Type Series DFX Type Series DSE
Type Series KVE Type Series MVE Type Series ZVE Type Series KER Type Series KED Type Series KEDD Type Series DFX Type Series DSE Publication DKL 100 E 09/2004 Index Page 2 Wire ball bearing KVE-component
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
METRIC A-A-59585C 15 September 2008 SUPERSEDING A-A-59585B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03 The General Services
SKF Energy Efficient deep groove ball bearings. Reduced friction for reduced energy use
SKF Energy Efficient deep groove ball bearings Reduced friction for reduced energy use SKF Energy Efficient bearings Engineered to promote sustainability As the need to conserve energy grows more apparent
General Purpose Clutches FSO/HPI
General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light
General information on radial seals
170 General information on radial seals Radial seals is the common name for shaft seals, which seal against a rotating shaft using an elastic and resilient lip of rubber or PTFE. The lip in turn is either
12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
Roller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
BESTSELLER. Linear bushings. Product properties:
are reliable and cost-efficient bearings based on the roller bearing principle. Hereby, the balls move along an internal track on the load side, and then return via a return track resulting in an overall
Ch# 11. Rolling Contact Bearings 28/06/1438. Rolling Contact Bearings. Bearing specialist consider matters such as
Ch# 11 Rolling Contact Bearings The terms rolling-contact bearings, antifriction bearings, and rolling bearings are all used to describe the class of bearing in which the main load is transferred through
LINEAR BEARINGS & HOUSINGS
LINEAR BEARINGS & HOUSINGS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com GENERAL INFORMATION Introduction Ball bushings are anti-friction bearings for linear motion. They offer
Cam Follower Bearings
Cam Follower Bearings RegalPTS.com/McGill McGill Precision Bearings Reduce Operating Cost CAMROL Cam Follower Selection Guide Condition How to identify Potential Solutions General Purpose Applications
ASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
RS & RT WORM GEAR BOXES
RS & RT WORM GEAR BOXES C-MRS-MRT ed0-2009 rev00 GB Product Description Multipurpose housing Aluminium die cast & Grey Iron Modular for all mountings Wormshaft ZI profile, hardened and ground. Alloy steel.
Rolling Bearings KLF-ZVL Bearings, s. r. o.
Rolling Bearings KLF-ZVL Bearings, s. r. o. Lidická 667, 258 01 Vlašim tel.: 00420 317 844 485, fax: 00420 317 844167 www. klf-zvl.cz, klf-zvl@klf-zvl.cz Page 3 Double-Row Cylindrical Roller Bearings with
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
EURO-BEARINGS LTD COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE. Tel: +44 (0)
COMBINED ROLLER BEARINGS & MATING STEEL PROFILES CATALOGUE email: sales@euro-bearings.com Tel: +44 (0)1908 511733 2015 CATALOGUE CONTENTS COMBINED ROLLER BEARINGS Standard CR Bearings Eccentric Adjustable
Highest Performance: Dyna Series
Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space
Linear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company