SSRB range with prefix and suffix
|
|
- Alexina Singleton
- 6 years ago
- Views:
Transcription
1 SSRB range with prefix and suffix 21
2 Designations information There are two designation systems for SKF Explorer sealed spherical roller bearings. One identifies sealed bearings in the standard ISO dimension series and the other extended width versions. Below is shown how the two designation systems are to be interpreted. Other suffixes, denoting special bearings or frequent variants, e.g. radial internal clearance other than Normal, are added according to the standard designation system. Bearings with dimensions according to ISO standard xxxxx-2csx/xxxx Example: CS5/VT143 VT143: Filled to 25-45% with LGEP 2 grease. See also supplementary suffixes on page 20. 2CS: Acrylonitrile-butadiene rubber (NBR) seal on both sides. Does not specify grease type or filling degree! 2CS5: Hydrogenated acrylonitrile-butadiene rubber (HNBR) seal on both sides. Does not specify grease type or filling degree! 2CS2: Fluoroelastomer (FKM) seal on both sides. Does not specify grease type or filling degree! Standard five-digit basic designation Bearings with extended width BS2-xxxx-xCSx/xxxx Example: BS CS5/VT143 See above The two initial digits denote the dimension series and the two last digits the bore diameter divided by 5. Denotes a spherical roller bearing (2 rows of rollers). 19
3 Suffixes in product table 2CS 2CS2 2CS5 Bearing sealed on both sides. Seal material: Acrylonitrile-butadiene rubber (NBR). Bearing sealed on both sides. Seal material: Fluoroelastomer (FKM). Bearing sealed on both sides. Seal material: Hydrogenated acrylonitrile-butadiene rubber (HNBR). K Tapered bore. Taper 1:12 K30 Tapered bore. Taper 1:30 VT143 W Filled to 25-45% with LGEP 2 grease. The filling degree depends on bearing size. Bearing without W33 groove and holes in the outer ring. Supplementary suffixes CS CS5 C3 GEM9 VT143B VT143C Bearing sealed on one side Seal material: Acrylonitrile-butadiene rubber (NBR) Outer ring with W33 groove and holes Bearing sealed on one side Seal material: Hydrogenated acrylonitrile-butadiene rubber (HNBR). Outer ring with W33 groove and holes Radial internal clearance greater than Normal Filled to % with LGHB 2 grease Filled to 45-60% with LGEP 2 grease Filled to % with LGEP 2 grease Old versus new suffixes Old suffix New suffix xxxxx-2cs equal to xxxxx-2cs/vt143 information (Grease specification included in the 2CS suffix) (Grease specification not included in the 2CS suffix. Instead it is included in the VT143 suffix) xxxxx- 2CS5 replaced by xxxxx-2cs5/gem9 (Grease specification included in the 2CS5 suffix) (Grease specification not included in the 2CS5 suffix. Instead it is included in the GEM9 suffix) 20
4 SKF Explorer sealed spherical roller bearings d mm B K b r 2 r1 D D 1 d d 2 d Cylindrical bore Tapered bore Principal Basic load ratings Fatigue Limiting Mass Designations dimensions dynamic static load speed Bearings with Bearings with limit cylindrical bore tapered bore d D B C C 0 P u mm kn kn r/min kg , ,26 BS CS/VT , ,34 BS CS/VT ,5 85 9, ,52 BS CS/VT ,5 90 9, ,57 BS CS/VT143 BS CSK/VT ,2 BS CS/VT , ,66 BS CS/VT143 BS CSK/VT , ,6 BS CS/VT143 BS CSK/VT , ,7 BS CS/VT143 BS CSK/VT ,1 BS CS/VT143 BS CSK/VT , BS CS/VT143 BS CSK/VT ,8 BS CS/VT143 BS CSK/VT , ,3 BS CS/VT143 BS CSK/VT , ,4 BS CS/VT143 BS CSK/VT , , CS5W/VT ,6 BS CS/VT143 BS CSK/VT ,15 BS CS/VT143 BS CSK/VT , ,8 BS CS/VT143 BS CSK/VT ,1 BS CS/VT143 BS CSK/VT , , CS2W/VT , ,1 BS CS/VT143 BS CSK/VT ,5 BS CS/VT143 BS CSK/VT ,4 BS CS/VT143 BS CSK/VT ,2 BS CS/VT143 BS CSK/VT , BS CS/VT143 BS CSK/VT ,7 BS CS/VT143 BS CSK/VT , , CS/VT , ,65 BS CS/VT143 BS CSK/VT143 22
5 r a D a d a d a d b B a Dimensions Abutment and Calculation factors fillet dimensions d d 2 D 1 b K r 1,2 d a d a d b Ba D a r a e Y 1 Y 2 Y 0 ~ ~ min min max min min max max mm mm , ,4 1 0,35 1,9 2,9 1, ,7 3, , ,4 1 0,31 2,2 3, ,7 3,7 2 1, ,31 2,2 3,3 2, ,5 3 1, ,28 2,4 3,6 2,5 47,5 81 5,5 3 1,5 47,5 47, ,5 0,37 1,8 2,7 1, ,1 5,5 3 1, , ,26 2,6 3,9 2, ,1 5,5 3 1, ,5 0,37 1,8 2,7 1, ,1 5,5 3 1, , ,24 2,8 4,2 2,8 61,5 97,6 5, , ,37 1,8 2,7 1, , , ,5 0,24 2,8 4,2 2, , ,35 1,9 2,9 1, , ,5 0,24 2,8 4,2 2, ,1 8,3 4,5 2, ,35 1,9 2,9 1, ,9 92,8 5,5 3 1, , ,27 2,5 3,7 2, ,5 3 1, , ,5 0,24 2,8 4,2 2,8 78, ,3 4,5 2, , ,35 1,9 2,9 1, , ,5 0, ,4 2,8 86,8 136,1 8,3 4,5 2, , , , , , ,28 2,4 3,6 2, , ,5 0,22 3 4,6 2, ,3 4,5 2, ,35 1,9 2,9 1, , ,5 85 2, ,22 3 4,6 2,8 94,2 152,1 8,3 4,5 2, , ,35 1,9 2,9 1, , ,22 3 4,6 2, ,5 20, ,24 2,8 4,2 2,8 104,5 147,1 5, , ,31 2,2 3,3 2, ,1 8,3 4,5 2, ,24 2,8 4,2 2,8 23
6 SKF Explorer sealed spherical roller bearings d mm K b r 2 r1 D D 1 B d d 2 Cylindrical bore Principal Basic load ratings Fatigue Limiting Mass Designations dimensions dynamic static load speed Bearings with Bearings with limit cylindrical bore tapered bore d D B C C 0 P u mm kn kn r/min kg , , CS2/VT , CS2/VT , CS5/VT ,35 BS CS5/VT143 BS CS5K/VT , , CS/VT , , CS/VT CS/VT , CS5/VT CS5K/VT , CS5/VT ,6 BS CS5/VT143 BS CS5K/VT , , , CS5/VT CS5K/VT , CS2/VT , CS5/VT , CS5/VT , ,75 BS CS5/VT143 BS CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT , , CS5/VT CS5/VT BS CS5/VT143 BS CS5K/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT , CS5/VT CS5K/VT , CS5/VT , CS5/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT , CS5/VT CS5K/VT143 24
7 r a r a D a d a d a d b B a Dimensions Abutment and Calculation factors fillet dimensions d d 2 D 1 b K r 1,2 d a d a d b B a D a r a e Y 1 Y 2 Y 0 ~ ~ min min max min min max max mm mm , ,5 0,28 2,4 3,6 2, ,27 2,5 3,7 2, , ,35 1,9 1,2 1, ,3 4,5 2, ,5 22, ,24 2,8 4,2 2, ,3 4,5 2, ,30 2,3 3,4 2, ,23 2,9 4,4 2, , , ,3 4, ,27 2,5 3,7 2, ,35 1,9 2,9 1, ,3 4,5 2, , ,25 2,7 4 2, ,3 4,5 2, , ,20 3,4 5 3, ,28 2,4 3,6 2, ,37 1,8 2,7 1, ,1 6 2, , ,26 2,6 3,9 2, ,3 4,5 2, , ,9 7, ,5 0, ,3 4, ,21 3,2 4,8 3, ,30 2,3 3,4 2, , , , ,5 0,27 2,5 3,7 2, ,3 4, ,5 0,31 2,2 3,3 2, , , ,3 4, ,2 3,4 5 3, ,28 2,4 3,6 2, ,3 4,5 2, ,35 1,9 2,9 1, , ,5 0,24 2,8 4,2 2, , ,5 0, , , Valid for cylindrical bore (SKF Gen. Cat. std). Corresponding values for tapered bore are listed on page
8 SKF Explorer sealed spherical roller bearings d mm K b r 2 r1 D D 1 B d d 2 Cylindrical bore Principal Basic load ratings Fatigue Limiting Mass Designations dimensions dynamic static load speed Bearings with Bearings with limit cylindrical bore tapered bore d D B C C 0 P u mm kn kn r/min kg , , CS5/VT CS5K/VT , CS5/VT CS5/VT CS5K/VT CS5/VT CS5K30/VT CS5/VT CS5K/VT , CS5/VT , CS5/VT CS5K/VT , CS5/VT CS5K/VT CS5/VT , CS5/VT CS5K/VT CS5/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT , CS5/VT CS5/VT CS5K/VT , CS5/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5/VT CS5K/VT , CS5/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT , CS5/VT CS5K/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT , CS5/VT , CS5/VT CS5K/VT CS5/VT143 26
9 r a r a D a d a d a d b B a Dimensions Abutment and Calculation factors fillet dimensions d d 2 D 1 b K r 1,2 d a d a d b B a D a r a e Y 1 Y 2 Y 0 ~ ~ min min max min min max max mm mm ,3 4,5 2, ,2 3,4 5 3, , ,28 2,4 3,6 2, ,1 6 2, ,28 2,4 3,6 2, ,3 4,5 2, ,37 1,8 2,7 1, ,9 7, ,5 0,24 2,8 4,2 2, , ,5 0, , , ,1 6 2, ,2 3,4 5 3, ,3 4,5 2, ,28 2,4 3,6 2, ,9 7,5 2, ,28 2,4 3,6 2, ,3 4,5 2, ,37 1,8 2,7 1, ,9 7, ,5 0,25 2,7 4 2, , , ,1 6 2, ,22 3 4,6 2, ,3 4,5 2, ,3 2,3 3,4 2, ,9 7,5 2, ,28 2,4 3,6 2, ,3 4,5 2, ,37 1,8 2,7 1, , ,25 2,7 4 2, ,9 7,5 2, ,22 3 4,6 2, ,3 4,5 2, ,31 2,2 3,3 2, ,9 7, ,5 0,28 2,4 3,6 2, , ,5 0,37 1,8 2,7 1, , ,26 2,6 3,9 2, ,9 7, ,5 0,3 2,3 3,4 2, , ,5 0,40 1,7 2,5 1, , ,26 2,6 3,9 2, ,9 7,5 2, ,24 2,8 4,2 2, , ,5 0,31 2,2 3,3 2, , ,5 0,40 1,7 2,5 1, , ,26 2,6 3,9 2, , ,35 1,9 2,9 1,8 Valid for cylindrical bore (SKF Gen. Cat. std). Corresponding values for tapered bore are listed on page
10 SKF Explorer sealed spherical roller bearings d mm K b r 2 r1 D D 1 B d d 2 Cylindrical bore Principal Basic load ratings Fatigue Limiting Mass Designations dimensions dynamic static load speed Bearings with Bearings with limit cylindrical bore tapered bore d D B C C 0 P u mm kn kn r/min kg CS5/VT CS5K/VT , CS5/VT CS5K/VT , CS/VT , CS5/VT CS5K/VT , CS5/VT CS5K/VT , CS5/VT CS5K/VT , CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT CS5/VT CS5K/VT143 Not SKF Explorer bearing 28
11 r a r a D a d a d a d b B a Dimensions Abutment and Calculation factors fillet dimensions d d 2 D 1 b K r 1,2 d a d a d b B a D a r a e Y 1 Y 2 Y 0 ~ ~ min min max min min max max mm mm ,9 7, ,5 0,24 2,8 4,2 2, , ,28 2,4 3,6 2, ,3 4,5 2, ,15 4,5 6,7 4, , ,27 2,5 3,7 2, ,9 7, ,5 0,23 2,9 4,4 2, , ,28 2,4 3,6 2, , ,23 2,9 4,4 2, , ,3 2,3 3,4 2, , ,3 2,3 3,4 2, , ,3 2,3 3,4 2, , ,3 2,3 3,4 2, , ,31 2,2 3,2 2,2 Valid for cylindrical bore (SKF Gen. Cat. std). Corresponding values for tapered bore are listed on page
Sealed SKF Explorer spherical roller bearings. Optimum protection against contaminants, downtime and high maintenance costs
Sealed SKF Explorer spherical roller bearings Optimum protection against contaminants, downtime and high maintenance costs Contents The SKF brand now stands for more than ever before, and means more to
More information10 Thrust ball bearings
Rolling bearings 10 Thrust ball bearings Designs and variants... 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages... 1010 Bearings with sphered housing
More informationDrawn cup needle roller bearings
Drawn cup needle roller bearings Sealed drawn cup needle roller bearings... 78 Full complement drawn cup needle roller bearings... 79 3 Dimensions... 79 Tolerances... 79 Misalignment... 80 Cages... 80
More information10 Thrust ball bearings
10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings
More informationSealed SKF spherical roller bearings for demanding environments
Sealed bearings Page... 18 Page... 32 Sealed SKF spherical roller bearings for demanding environments Sealed SKF spherical roller bearings are designed to fulfil high demands on sealing efficiency and
More informationSingle direction thrust ball bearings Double direction thrust ball bearings
Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...
More informationINSOCOAT bearing designs INSOCOAT bearings with coated outer ring INSOCOAT bearings with coated inner ring
INSOCOAT bearings INSOCOAT bearing designs... 913 INSOCOAT bearings with coated outer ring... 913 INSOCOAT bearings with coated inner ring... 913 Other INSOCOAT bearings... 913 Bearing data general...
More information15E INSOCOAT bearings
15E INSOCOAT bearings Designs and variants............... 1206 INSOCOAT bearings with a coated outer ring......................... 1207 INSOCOAT bearings with a coated inner ring.........................
More information4 Self aligning ball bearings
Rolling bearings 4 Self aligning ball bearings Designs and variants... 538 Basic design bearings... 539 Bearings with an extended inner ring.. 540 Cages... 540 Sealing solutions... 540 Greases for sealed
More informationFAG Angular Contact Thrust Ball Bearings double direction
FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine
More informationSEALED SPHERICAL ROLLER BEARING
SEALED SPHERICAL ROLLER BEARING McGILL SPHERE-ROL BEARINGS Invented in 1967, SPHERE-ROL bearings utilize a single row of rollers which provide a wide variety of advantages. High capacities, high limiting
More informationAngular contact ball bearings
Angular contact ball bearings Single row angular contact ball bearings... 409 Double row angular contact ball bearings... 433 Four-point contact ball bearings... 451 Double row cam rollers... 463 405 Angular
More informationRolling Bearings KLF-ZVL Bearings, s. r. o.
Rolling Bearings KLF-ZVL Bearings, s. r. o. Lidická 667, 258 01 Vlašim tel.: 00420 317 844 485, fax: 00420 317 844167 www. klf-zvl.cz, klf-zvl@klf-zvl.cz Page 3 Double-Row Cylindrical Roller Bearings with
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationSINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS
SINGLE ROW FULL COMPLEMENT CYLINDRICAL ROLLER BEARINGS Design Single row full complement cylindrical roller bearings suit locations with high radial load and lower revolution frequencies, comparing to
More informationPublication BCRKB.Rev00EN. RKB Europe SA 2018/07
BEARING CATALOGUE Publication BCRKB.Rev00EN RKB Europe SA 2018/07 Every care has been taken to ensure the accuracy of the information in the present document but no liability can be accepted fony errors,
More informationNEW FORCE SEALED SPHERICAL ROLLER BEARINGS
NEW FORCE SEALED SPHERICAL ROLLER BEARINGS ZKL New Force Sealed Double-Row Spherical Roller Bearings Table of Contents: Economical and Environment-Friendly... 4 Advantages of Sealed Spherical Roller Bearings
More informationCylindrical roller bearings for large electric motors
Cylindrical roller bearings for large electric motors Cylindrical roller bearings are typically used in belt or gear driven medium- to largesized electric motors, where heavy radial loads prevail. These
More informationSensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units
Mechatronics Sensor-Bearing Units... 957 Steer-By-Wire Modules... 967 Mast Height Control units... 969 Other sensorized units... 971 955 Sensor-Bearing Units SKF Sensor-Bearing Units... 958 SKF Explorer
More informationAngular contact thrust ball bearings
Angular contact thrust ball bearings Angular contact thrust ball bearings, single direction, Ry type and angular contact thrust ball bearings, double direction, 2344 and 2347 types, have a large contact
More information12.1 SINGLE ROW BALL BEARINGS
12.1 SINGLE ROW BALL BEARINGS Due to the versatility of applications, single row ball bearings are among the most frequently used types of rolling bearings. They are made as non-separable without a filling
More informationSKF high-capacity cylindrical roller bearings. Full complement bearings with a cage
SKF high-capacity cylindrical roller bearings Full complement bearings with a cage Higher load ratings and longer service life Applications like industrial gearboxes, gearboxes in wind turbines or machines
More informationFlanged housings FNL series
Flanged housings FNL series Bearing types Self-aligning ball bearings Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 02, 22 FNL flanged housings are well-proven machine
More information3 Angular contact ball bearings
3 Angular contact ball bearings Designs and variants.............. 476 Single row angular contact ball bearings... 476 Basic design bearings... 477 Bearings for universal matching.... 477 Double row angular
More information6000_EN_05_TRB.indd
6000_EN_05_TRB.indd 600 06-10-02 14.41.31 Taper roller bearings Single row taper roller bearings... 605 Paired single row taper roller bearings... 671 601 6000_EN_05_TRB.indd 601 06-10-02 14.41.32 Taper
More informationSplit pillow blocks SDAF series including the extended range (inch dimensions)
Split pillow blocks SDAF series including the extended range (inch dimensions) Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22, 23 (SDAF) 30, 31, 32 (SDAF
More informationBearings and steel balls
Bearings and steel balls Deep groove ball bearings DIN 625 T1 P. 2-5 Deep groove ball bearings stainless steel DIN 625 T1 P. 2-15 Angular ball bearings DIN 628 T1 P. 2-17 Spindle bearings DIN 628 T1 P.
More informationSpherical roller bearings
Spherical roller bearings Technical Information Date 2006-03-31 Reg 471 22; 842 2; 845 51 Publ.No. TI 0401/III Application handbook SKF Explorer spherical roller bearings for vibratory applications For
More informationCylindrical roller bearings
Cylindrical roller bearings Cylindrical roller bearings are manufactured in a various range of constructive types and sizes, particularly single row cylindrical roller bearings but also two or more row
More informationMTK+ Suffix and prefix overview. Deep groove ball bearings. Self-aligning ball bearings
TK+ Suffix and prefix overview uthor Kevin Drake Released by Koen Geeraerts Release date 26 June 2016 Document Id D-833 Version 1.2 Revision date 14 July 2016 Deep groove ball bearings Z Pressed steel
More informationNeedle Roller Bearings
Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges
More informationSealed Spherical Roller Bearings [WA Type]
Sealed Spherical Roller Bearings [WA Type] Note: Markings on the seal are not white in actual bearings. CAT. No. -@/E Up to five times longer service life Sealed Spherical Roller BearingsWA Type ULTAGE
More informationSKF Energy Efficient deep groove ball bearings. Reduced friction for reduced energy use
SKF Energy Efficient deep groove ball bearings Reduced friction for reduced energy use SKF Energy Efficient bearings Engineered to promote sustainability As the need to conserve energy grows more apparent
More information14 Track runner bearings
14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers
More informationSKF ball bearing units UC range. Japanese Industrial Standards compliant ball bearing units
SKF ball bearing units UC range Japanese Industrial Standards compliant ball bearing units Solid design, solid benefits In order to meet the industry s demands of improved protection against contaminant
More informationSKF Explorer cylindrical roller bearings. Extended range for large, heavy industrial applications
SKF Explorer cylindrical roller bearings Extended range for large, heavy industrial applications 2 A higher level of performance for large, heavy-duty applications The SKF Explorer performance class now
More informationIntegral tapered roller bearings Series JK0S
Integral tapered roller bearings Series JK0S Technical Product Information Features Features FAG integral tapered roller bearings JK0S are ready-to-fit, easily mounted units. The single row bearings are
More informationDEEP GROOVE BALL BEARINGS
DEEP GROOVE BALL BEARINGS MOVING THE WHEELS OF THE INDUSTRY ABOUT NRB INDUSTRIAL BEARINGS LIMITED NRB Industrial Bearings Ltd is the industrial arm of the NRB Group. We manufacture bearings for various
More informationBall Screw Support Bearings
Ball Screw Support Bearings. Ball Screw Support Bearings CONTENTS. Ball Screw Support Bearings q Angular contact thrust ball bearings A-BST series w Duplex angular contact ball bearings HT series e Needle
More informationTECHNICAL INFORMATION
General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings
More informationCATALOG
www.craft-bearings.com CATALOG The contents of this catalog are subjected to change without prior notice. Every possible effort has been made to ensure that the data here in is correct; however, CRAFT
More informationSPHERICAL ROLLER BEARINGS
SPHERICAL ROLLER BEARINGS Spherical roller bearing can bear heavy load,it has two row rollers,one common spherical raceway in outer ring, two raceway in the inner ring which inclined to a certain angle
More information5 Cylindrical roller bearings
5 Cylindrical roller bearings Designs and variants.............. 568 Single row cylindrical roller bearings.. 570 Basic design bearings... 570 Other variants... 572 Other designs................... 574
More informationBEARINGS FOR RAILWAY APPLICATIONS
BEARINGS FOR RAILWAY APPLICATIONS BEARINGS FOR RAILWAY APPLICATIONS The railway industry is a promising field world-wide. ZKL therefore dedicates special attention to the bearings for rail vehicles. The
More informationSEALED FAG SPHERICAL ROLLER BEARINGS
SEALED FAG SPHERICAL ROLLER BEARINGS The cost-effective and environmentally friendly solution FAG OEM und Handel AG Application Characteristics Programme Application Continuous casting plants feature a
More informationSKF precision bearings
SKF precision bearings Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve total quality in everything we do. For those who use our products, Made by SKF implies
More informationTIMKEN SNT SPLIT PLUMMER BLOCKS
TIMKEN SNT SPLIT PLUMMER BLOCKS TIMKEN SNT SPLIT PLUMMER BLOCKS 1 TABLE OF CONTENTS INTRODUCTION... 3 TIMKEN SNT SPLIT PLUMMER BLOCKS...4 SEAL OPTIONS AND DESCRIPTIONS...6 SEAL SELECTION AND CONFIGURATION
More informationFKL Bearings in Vibrating Screens
FKL Bearings in Vibrating Screens Bearings in Vibrating Screens: Vibrating screens are used for grading (i.e. separation of solid materials by grain size) of materials and other vibratory machinery such
More informationMotion Technologies Bearing Products
Page 1 of 12 Motion Technologies Bearing Products LARGE DIAMETER BEARINGS (conventional design) o Deep groove ball to 1900mm bore page 3 o Four point contact ball to 500mm bore page 3 o Single row angular
More informationFAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance
FAG Cylindrical Roller earings full complement FAG Cylindrical Roller earings full complement Standards asic designs Tolerances earing clearance Full complement cylindrical roller bearings are suitable
More informationBearings. Rolling-contact Bearings
Bearings A bearing is a mechanical element that limits relative motion to only the desired motion and at the same time it reduces the frictional resistance to the desired motion. Depending on the design
More informationDouble-row ball bearings
Double-row ball bearings Radial double-row ball bearings 262 Definition and capabilities 262 Series 262 Tolerances and clearances 262 Design criteria 263 Suffixes 263 Characteristics 264 Radial double-row
More informationDOUBLE-ROW BALL BEARINGS CUSTOMISED BALL BEARINGS
DOUBLE-ROW BALL BEARINGS CUSTOMISED BALL BEARINGS SUBSCRIBE TO NSK NEWSLETTER As one of the world s leading manufacturers of rolling bearings, linear technology components and steering systems, we can
More informationSplit plummer block housings SNLN 30 series
Split plummer block housings SNLN 30 series 4 Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 30, 40 Shaft diameter range 110 to 280 mm Typical shaft-bearing
More information12.4 CYLINDRICAL ROLLER BEARINGS
12.4 CYLINDRICAL ROLLER BEARINGS Cylindrical roller bearings are manufactured in many designs, dimensions and sizes. The most common designs are single row cylindrical roller bearings with cage. Single
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability
More informationTable of Contents Super Precision Machine Tool Bearings
Introduction Spherical Tapered Roller Roller Roller Table of Contents Machine Tool INTRODUCTION About NSK Machine Tool...............183 NOMENCLATURE/INTERCHANGE Angular Contact.......184 Roller......186
More informationSKF ConCentra ball bearings and units. True concentric locking, for fast and reliable mounting
SKF ConCentra ball bearings and units True concentric locking, for fast and reliable mounting Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While
More informationCh# 11. Rolling Contact Bearings 28/06/1438. Rolling Contact Bearings. Bearing specialist consider matters such as
Ch# 11 Rolling Contact Bearings The terms rolling-contact bearings, antifriction bearings, and rolling bearings are all used to describe the class of bearing in which the main load is transferred through
More informationTOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS
TOUGH AND LONG LIFE (TL) SERIES SPHERICAL ROLLER BEARINGS TOUGH PERFORMANCE IN HIGH TEMPERATURES. High temperature processing and manufacturing environments, such as those in the dryer section of paper
More informationModification Method of Back-up Roll Bearing by Replacing Oil Film Bearing with Rolling Bearing
TECHNICAL REPORT Modification Method of Back-up Roll Bearing by Replacing Oil Film Bearing with Rolling Bearing J. KUBO N. SUZUKI As back-up roll s in rolling mills must support several thousand tons of
More informationHome at last. The new FNL fl anged bearing housing
Home at last The new FNL fl anged bearing housing Approved by the family Previously it was blue-green. Yet was seen as the black sheep of the family. Now it s the other way around. FNL offers everything
More informationSplit plummer block housings SED 30, 31, 32 and 39 series
Split plummer block housings SED 30, 31, 32 and 39 series Bearing types Spherical roller bearings Bearing dimension series 30, 31, 32 and 39 Shaft diameter range 430 to 900 mm Typical shaft-bearing combinations
More informationbearings (metric series)
Taper roller bearings (metric series) 32302 B J2 / Q CL7C Nomenclature 1 2 3 4 1. Contact angle: 3. Features: B Larger contact angle than standard Q Improved friction torque characteristics and raceway
More informationPULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS PAGE 2 Table of Contents: Drive and Bore Adaptors..3 Clevis Adaptors.4 Shoulder Adaptors.5 Flat Idler Pulleys..6 Flat Idler Pulleys Continued
More informationMaximizing performance. Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility
Maximizing performance Radial shaft seals HMS5 and HMSA10 Longer service life Improved sealing performance Excellent oil compatibility Radial shaft seals HMS5 and HMSA10 Main features SKF metric line of
More informationMAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION
Technical Paper MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION Tapered Double Inner Row Bearing Vs. Spherical Roller Bearing On The Fixed Position Laurentiu Ionescu,
More information16 Bearing accessories
Rolling bearings 16 Bearing accessories Adapter sleeves... 1270 Designs and variants... 1270 Basic design... 1270 Variants for oil injection... 1270 Variants for CARB toroidal roller bearings... 1273
More informationSKF sealed high precision angular contact ball bearings for enhanced performance and extended service life
SKF sealed high precision angular contact ball bearings for enhanced performance and extended service life Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve
More informationSKF dry lubricated bearings. Reliable performance in high temperature applications
SKF dry lubricated bearings Reliable performance in high temperature applications Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains
More informationSAMICK LINEAR BUSHING
Linear Bushing SAMICK LINEAR BUSHING SAMICK Linear Bushing, LM type is the linear motion system with unlimited stroke by applying with LM shaft. Because of the point contact between Balls and LM shaft,
More informationSKF Explorer spherical roller bearings Optimized for superior field performance
SKF Explorer spherical roller bearings Optimized for superior field performance Continuous improvement to optimize The timeline below illustrates SKF milestones in the development of self-aligning bearings.
More informationTECHNICAL INFORMATION
Radial Roller Bearings Fitting and Mounting Fixed Bearings and Float Bearings Radial and axial loads in bearing units can be transmitted by fixed and floating bearings A fixed bearing is generally used
More informationBasic Static Load Rating of Rolling Contact Bearings
Basic Static Load Rating of Rolling Contact Bearings The load carried by a non-rotating bearing is called a static load. The basic static load rating is defined as the static radial load (in case of radial
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationSleeves and accessories
Sleeves 392 Definition 392 Series 392 Variants 392 Fitting and removal criteria 392 Suffixes 395 Characteristics 396 Adapter sleeves (mm) 396 Adapter sleeves (inch) 399 Withdrawal sleeves 400 Nuts and
More informationSKF Energy Efficient double row angular contact ball bearings. Reduced friction for reduced energy use
SKF Energy Efficient double row angular contact ball bearings Reduced friction for reduced energy use SKF Energy Efficient bearings Engineered to promote sustainability As the need to conserve energy grows
More informationSuper-precision cylindrical roller bearings: High-speed. N 10 series
Super-precision cylindrical roller bearings: High-speed N 10 series Contents A Product information High-speed super-precision single row cylindrical roller bearings... 3 The assortment... 4 High-speed
More informationSKF FAG Timken NSK NTN
BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection
More informationBearing Fundamentals. Timken Training
Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction
More informationU < 1000 V I 0 A I > 0 A. Current-insulating SLF rolling bearings. Electrical insulation between housing and shaft prevents this damage.
prevent damage by current passage Electrical insulation between housing and shaft prevents this damage. Electric voltage which is internally generated between the motor and the stator, especially in electric
More informationThrust ball bearings. - double direction
Thrust ball bearings Thrust ball bearings are manufactured in two versions: single and double direction. These bearings can carry single or double direction heavy axial loads. - single direction - double
More informationChapter 11 Rolling Contact Bearings
Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline 3 Overview The term rolling bearing is used to describe class of bearing in which the main load is transferred through elements in rolling contact
More information*複合型/B _*複合型/B /05/25 10:10 ページ 151 Complex Bearings
Complex Bearings Complex bearings Complex Bearings complex bearing is comprised of a needle roller bearing of supporting radial load and a thrust bearing for supporting axial load which are assembled integrally.
More informationSKF ConCentra roller bearing units for fast and reliable mounting
SKF ConCentra roller bearing units for fast and reliable mounting Now also including tables for inch assortment Contents The SKF brand now stands for more than ever before, and means more to you as a valued
More informationCYLINDRICAL ROLLER BEARING CATALOG TIMKEN THRUST AND PLAIN BEARINGS CATALOG
CYLINDRICL ROLLER BERING CTLOG TIMKEN THRUST ND PLIN BERINGS CTLOG Spherical Plain Bearings SPHERICL PLIN Overview: Timken s spherical plain bearings consist of a spherically ground inner ring housed in
More information3. BEARING ARRANGEMENT DESIGN
3. BEARING ARRANGEMENT DESIGN 3.1 GENERAL PRINCIPLES OF ROLLING BEARING ARRANGEMENT DESIGN Rotating shaft or another component arranged in rolling bearings is guided by them in radial as well as in axial
More information15. Bearing Handling Storage Fitting A-97
15. Bearing Handling Bearings are precision parts, and in order to preserve their accuracy and reliability, care must be exercised in their handling. In particular, bearing cleanliness must be maintained,
More informationTrack Rollers/ Cam Followers
Track Rollers/ Cam Followers Page Nomenclature...................................... 460 Introduction....................................... 462 Identification....................................... 462
More informationNTN Ball Screw Support Bearings
Ball Screw Support Bearings 1. Ball Screw Support Bearings CONTENTS 1. Ball Screw Support Bearings q Angular contact thrust ball bearing A-BST w Duplex angular contact ball bearing HT 1 e Needle roller
More informationAt the end of this lesson, the students should be able to understand:
Instructional Objectives: At the end of this lesson, the students should be able to understand: About rolling contact bearings Ball bearing and roller bearing Basics definitions of design parameters of
More informationBearings for Fans. Bearing arrangements for fans
1.1.1. Bearings for Fans Bearing arrangements for fans Summary The large variety of fans can be classified in different ways. Generally, there are two categories that are based on the fan s directions
More informationCONTENTS. DODGE Plummer Blocks
CONTENTS DODGE Plummer Blocks Features/Benefits.......................................... B12-2 How To Order............................................. B12-4 Nomenclature.............................................
More informationrolling bearings technical handbook 10/2001-TP-VL-A-Rev.1
rolling bearings technical handbook 10/2001-TP-VL-A-Rev.1 CONTENTS Page 2 PREFACE PREFACE 2 SELECTION OF THE Page TYPE 3 AND 1. DETERMINING SELECTION OF OF THE THE BEARING TYPE AND SIZEDETERMINING OF THE
More informationSingle row angular contact ball bearing with 25 contact angle
Supplementary designations - suffixes It should be noted that the appearance of a suffix in the alphabetical list, which follows, does not mean that a particular variant is available. A AC Deviating or
More informationNEEDLE ROLLERS. Polígono Indutrial O Rebullón s/n Mos - España -
NEEDLE ROLLERS Needle rollers In certain applications, the limited amount of space available for bearings and the loads to be supported require the use of a full complement of needles independent of any
More informationHousings for paper machines SBFN, SBPN and SDM series
Housings for paper machines SBFN, SBPN and SDM series Bearing types Spherical roller bearings CARB toroidal roller bearings Bearing dimension series 22, 23, 31 (SBFN series) 31 (SBPN series) 30, 31 (SDM
More informationIntroduction. Deep Groove Ball Bearings. Angular Contact Ball Bearings. 1
Introduction Deep Groove Ball Bearings At Axis, we build exceptionally close tolerances into our bearings. Instead of the usual ABEC 1, we manufacture every Axis bearing to meet or exceed ABEC 3 tolerances.
More informationClassification and Characteristics of Rolling Bearings
1. Classification Characteristics of Rolling Beas 1.1 Rolling bea construction Most rolling consist of s with raceway (inner outer ), rolling elements (either balls or rollers) cage. The cage separates
More informationE1 Spherical Roller Bearings. The new standard for performance and operational reliability
E1 Spherical Roller Bearings The new standard for performance and operational reliability FAG s innovative E1 spherical roller bearing provides increased reliability, greater economic efficiency, and superior
More information