Tankless, Inc. Product Catalog 3/29/2018. Commercial & Industrial 3-Phase Water Heaters COMPANY

Transcription

1 Product Catalog 3/29/2018 Commercial & Industrial 3-Phase Water Heaters

2 Feature Comparison comparison of features in our model lines, and against the competition. Features for competing products are based on readily available public information. Recommended applications CF Series Mechanical Where ruggedness is required, but precise temperature is not. CE Series Electronic Where precise temp. and adjustability are required CES Series Safety applications Tepid water for emergency stations per OSH CERO Series Caustic liquids Caustic fluids including reverse osmosis water Competition Keltech Size Range kw kw kw kw kw kw kw Size Range BTU/hr KBTU/hr KBTU/hr KBTU/hr KBTU/hr KBTU/ hr Voltages 3-phase 208, 240, 480 Delta or Wye, 575 V Dynamic Load Balancing for even element wear 3-phase 208, 240, 480 Delta or Wye, 575 V 3-phase 208, 240, 480 Delta or Wye, 575 V 3-phase 208, 240, 480 V Delta or Wye Various 208, 240, 480, 575, 600 V No Yes Yes Yes Yes No Heat exchanger 316L Stainless Steel 316L Stainless Steel 316L Stainless Steel 316L Stainless Steel Copper & Brass Plastic Pipe size ¾ 1¼ ¾ 1¼ ¾ 1¼ ¾ 1¼ ¾ 1¼ ½ 1¼ Element sheathing 840 Incoloy 840 Incoloy 840 Incoloy Titanium 840 Incoloy None Temperature range F / C F / C F / C F / C F / C Temperature adjustability Is output temperature measured and displayed? ctivation flow rate None by 1 F by 1 F by 1 F Yes Yes No 0 gpm (constant hot) 3 gpm (optional flow switch) Yes ctual and requested output temperatures shown if unit is over capacity Yes ctual and requested output temperatures shown if unit is over capacity Yes ctual and requested output temperatures shown if unit is over capacity Yes Eemax Various KBTU/hr 208, 240, 480, 575, 600 V 1- & 3-phase F / C Yes NEM3 No NEM 4 0.5, 2.0 gpm 0.5, 2.0 gpm 0.5, 2.0 gpm 1.5 gpm 0.7, 1.0, 2.5 gpm Freeze protection Standard Standard Standard Standard Standard Optional Flow rate (@ 40 psi) Pressure drop (@ 40 psi) Elements individually fused 50 gpm gpm, 4 12 psi, 2 12 psi, gpm, 2 12 psi, gpm, 2 12 psi, gpm 8 40 gpm, dependent on pipe size 4 x psi, dependent on pipe size Yes Yes Yes Yes Yes Yes RS 232 interface No Yes Yes Yes No No Standard enclosure NEM 3 NEM 3 NEM 3 NEM 3 NEM 3 NEM 3 Optional enclosures NEM 4 and 4x NEM 4 and 4x NEM 4 and 4x NEM 4 and 4x NEM 4 and 4x NEM 4 and 4x Over-temperature protections Warranty Unknown 5-year heat exchanger 2-year electrical 5-year heat exchanger 2-year electrical 5-year heat exchanger 2-year electrical 5-year heat exchanger 2-year electrical 5-year heat exchanger 1-year electrical 20+ psi 8-year heat exchanger 2-year electrical Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29, 2018

3 Options NEM 4 Enclosure air-tight and water tight NEM 4X Enclosure air-tight and water tight stainless steel Flow Switch Thermostats Electronic Temperature Control (ETC) External Kill Switch Description For three or six element heater including all drains and fittings surrounding the plumbing. Powder-coated white. Includes water-tight window to view the control boards in the electronic models. 24 X 20 X 10 For twelve, eighteen or twenty-four element heater including all drains and fittings surrounding the plumbing. Powder-coated white. Includes water-tight window to view the control boards for the electronic units. 36 x 36 x 12 For three or six element heater including all drains and fittings surrounding the plumbing. Includes water-tight window to view the control boards in the electronic models. 24 X 20 X 10 For twenty four element heater including all drains and fittings surrounding the plumbing. Includes water-tight window to view the control boards in the electronic models. 36 x 36 x 12 llows CF Series units to turn on when water flow exceeds 3 GPM. Energizes control circuit and acts as additional safety against loss of water supply damaging heater. Saves energy if unit is idle for an extended period because water in the chamber will cool to room temperature. CF Series single-temperature thermostats regulate when the unit heats plus provide over-temperature protection. Select an activation temperature of 90, 110, 125, 145, 155, 185, or 200 F, or close to the output temperature of the heater at purchase. Thermostats can be replaced after heater purchase with a thermostat with a different setting. Normally used in recirculation systems to maintain the systems temperature. The customer sets the temperature they want to maintain and the unit will heat until the water entering the unit attains that temperature. The customer also determines how much they want the system temperature to cool before the unit comes on again. They do this by setting a DIFF temperature at 1+ degrees. For example, if you have 200 degree thermostats installed and set the ETC temperature to 185 and the DIFF to 3, the unit will heat at full power and put 200 F water back in to the system until the return water reaches 185 and the unit will shut off. Once the return water reaches 182 the unit will come on again and the cycle will repeat. Mounted to the outside door of a NEM 4 or 4x enclosure and allows the customer to kill power inside the unit by depressing the red button. 316L Stainless CERO models come standard with 316L stainless CERO all RS 232 Interface llows long distance monitoring and operation. CE all CES all CERO all Purge System Latent Heat Disposal System Pumps In explosion risk areas the customer needs to ensure the water heater will not explode in case of an equipment failure. The purge system maintains air pressure from a clean forced air source inside the water heater, ensuring only non-explosive air is inside the heater at all times. When a large heater shuts off in response to reduced water flow, the heating elements are still hot. Without a heat disposal system, this latent heat will raise the water inside the chamber about 15 F, possibly too hot for an eyewash station. This system reduces that unavoidable increase to 6 F. Various pumps are available and can be recommended for all units on a job by job basis pplicable Models CF 12, 15, 18, 24, 27, 36 CE 12, 15, 18, 24, 27, 36 CES 12, 15, 18, 24, 27, 36 CERO 12, 15, 18, 24, 27, 36 CF 81, 90, 108 CE 108, 120, 144 CES all CERO all CF 12, 15, 18, 24, 27, 36 CE 12, 15, 18, 24, 27, 36 CES 12, 15, 18, 24, 27, 36 CERO 12, 15, 18, 24, 27, 36 CF 48, 54, 72, 81, 90, 108 CE 48, 54, 72, 108, 120, 144 CES 48, 54, 72 CERO 48, 54, 72 CF all CF all Temperature setting must be selected when ordering CF all Requires NEM 4 or 4X enclosure Requires NEM 4 or 4X enclosure CF 12 element, 18 element CES 12 element, 18 element ll series and models larm System Visual and audio alarm system for safety applications CF all CES all Mixing Valve vailable for varying output temperatures in ¾ 1¼ sizes ll series and models 2060 Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29,

4 CF Series General Purpose Water Heaters CF Series models are a low technology, reliable way to heat water. They are electromechanical and heat water based on the temperature measured by a thermostat as the water/fluid passes the element. CF Series models are accurate to ±7 degrees F at low flow rates. They are more accurate at higher flow rates, and larger CF models are more accurate than smaller models. Features NEM 3 enclosures are standard 316L Stainless steel heat exchangers 840 Incoloy sheathing material for the elements ctivates on demand but stays hot without flow ensuring immediate hot water on demand Fixed temperature output determined by thermostat Output temperature range Fahrenheit Individually fused elements Output temperature is fixed and based on the thermostat installed Can be used in re-circulation systems with optional electronic temperature control Unique water flow relieves air build-up resulting on increased longevity Minimal pressure drop. See charts on website for details Easily serviced on site ll machining, welding, assembly, and testing done in Sarasota, Florida Each unit is tested at full and partial load MP draw to ensure measurement accuracy and proper operation Conforms to NSI/UL-499 Certified to CN/CS E Options NEM 4 and 4x enclosures are available Optional flow switch sets activation to 3 GPM Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29, 2018

5 CF Series Products and Capabilities Part Number Voltage kw Full Load mp Draw Temperature Range F (=djustable F=Fixed) Pipe Size Enclosure Size Includes Fittings (W x H x D) CF 12 KW CF 12 KW 480 Y 480 Wye , 110, 125, 145, 155, 185, 200 F x 23 x 9 CF 12 KW , 110, 125, 145, 155, 185, 200 F ¾ x 23 x 9 CF 15 KW CF 15 KW 480 Y 480 Wye , 110, 125, 145, 155, 185, 200 F ¾ x 23 x 9 CF 15 KW , 110, 125, 145, 155, 185, 200 F ¾ x 23 x 9 CF 18 KW CF 18 KW 480 Y 480 Wye , 110, 125, 145, 155, 185, 200 F ¾ x 23 x Delta available at added cost CF 18 KW , 110, 125, 145, 155, 185, 200 F ¾ x 23 x 9 CF 24 KW CF 24 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 24 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 27 KW CF 27 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 27 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 36 KW CF 36 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 36 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 36 KW , 110, 125, 145, 155, 185, 200 F ¾ x 32.5 x 9 CF 48 KW CF 48 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 48 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 54 KW CF 54 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 54 KW CF 54 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 72 KW CF 72 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 72 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 72 KW , 110, 125, 145, 155, 185, 200 F ¾ or x 42 x 9 CF 81 KW CF 81 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 25.5 x 36 x 9.25 CF 90 KW CF 90 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 25.5 x 36 x 9.25 CF 108 KW CF 108 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 25.5 x 36 x 9.25 CF 108 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 25.5 x 36 x 9.25 CF 120 KW CF 120 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 50 X 54 X 12 CF 144 KW CF 144 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 50 X 54 X 12 CF 144 KW , 110, 125, 145, 155, 185, 200 F 1 or 1¼ 50 X 54 X 12 3-Phase Voltages vailable kw GPM heated by 40 F GPM heated by 60 F GPM heated by 80 F Maximum water flow at 40 PSI CF 12 KW 208, 240, 480 Wye CF 15 KW 208, 240, 480 Wye CF 18 KW 208, 240, 480 Wye or Delta CF 24 KW 208, 240, 480 Delta CF 27 KW 208, 240, 480 Delta CF 36 KW 208, 240, 480 Delta, CF 48 KW 208, 240, 480 Delta CF 54 KW 208, 240, 480 Delta CF 72 KW 208, 240, 480 Delta, CF 81 KW 208, 240, 480 Delta CF 90 KW 208, 240, 480 Delta CF 108 KW 208, 240, 480 Delta, CF 120 KW 208, 240, 480 Delta CF 144 KW 208, 240, 480 Delta, Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29,

6 CE Series General Purpose Electronically-Controlled Water Heaters CE Series electronically-controlled water heaters calculate the amount of energy needed to meet hot water demand by measuring flow rate, then activating the minimum number of elements necessary to satisfy that demand. No energy is used when the unit is idle other than the pilot light. Larger CE Series models are normally used as boiler replacements or very specific process manufacturing applications. Smaller CE Series models are used for hand washing or smaller process applications. Features NEM 3 enclosures are standard 316L Stainless steel heat exchangers 840 Incoloy sheathing material for the elements ctivates on demand at.25 GPM Output temperature range Fahrenheit ctual and customer requested output temperatures viewable through window in the front panel Rocker switch on outside of unit adjusts temperature in one degree increments Individually fused elements Four over-temperature protections Dynamic load balancing ensures even element wear Unique water flow relieves air build-up resulting on increased longevity Freeze protection is a standard feature Minimal pressure drop. See charts on website for details Easily serviced on site ll machining, welding, assembly, and testing done in Sarasota, Florida Each unit is tested at full and partial load MP draw to ensure measurement accuracy and proper operation Conforms to NSI/UL-499 Certified to Can/CS Std. C22.2 No. 88. Options NEM 4 and 4x enclosures are available RS 232 interface available to allow remote monitoring and control Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29, 2018

7 CE Series Products and Capabilities Part Number Voltage kw Full Load mp Draw Temperature Range F (=djustable F=Fixed) Pipe Size Inches Enclosure Size Includes Fittings (W x H x D) CE 12 KW CE 12 KW 480 Y 480 Wye ¾ 22.5 x 23 x 7.5 CE 12 KW ¾ 22.5 x 23 x 7.5 CE 15 KW CE 15 KW 480 Y 480 Wye ¾ 22.5 x 23 x 7.5 CE 15 KW ¾ 22.5 x 23 x 7.5 CE 18 KW CE 18 KW 480 Y 480 Wye ¾ 22.5 x 23 x Delta available at added cost CE 18 KW ¾ 22.5 x 23 x 7.5 CE 24 KW CE 24 KW ¾ 22.5 x 32.5 x 7.5 CE 24 KW ¾ 22.5 x 32.5 x 7.5 CE 27 KW CE 27 KW ¾ 22.5 x 32.5 x 7.5 CE 27 KW ¾ 22.5 x 32.5 x 7.5 CE 36 KW CE 36 KW ¾ 22.5 x 32.5 x 7.5 CE 36 KW ¾ 22.5 x 32.5 x 7.5 CE 36 KW ¾ 22.5 x 32.5 x 7.5 CE 48 KW CE 48 KW ¾ or X 44 X 8 CE 48 KW ¾ or X 44 X 8 CE 54 KW CE 54 KW ¾ or X 44 X 8 CE 54 KW ¾ or X 44 X 8 CE 60 KW CE 60 KW ¾ or X 44 X 8 CE 60 KW ¾ or X 44 X 8 CE 72 KW CE 72 KW ¾ or X 44 X 8 CE 72 KW ¾ or X 44 X 8 CE 72 KW ¾ or X 44 X 8 CE 108 KW CE 108 KW ¼ 50 X 36 X 12 CE 120 KW CE 120 KW ¼ 50 X 36 X 12 CE 144 KW CE 144 KW ¼ 50 X 36 X 12 CE 144 KW ¼ 50 X 36 X 12 3-Phase Voltages vailable kw GPM heated by 40 F GPM heated by 60 F GPM heated by 80 F Maximum water flow at 40 PSI CE 12 KW 208, 240, 480 Wye CE 15 KW 208, 240, 480 Wye CE 18 KW 208, 240, 480 Wye or Delta CE 24 KW 208, 240, 480 Delta CE 27 KW 208, 240, 480 Delta CE 36 KW 208, 240, 480 Delta, CE 48 KW 208, 240, 480 Delta CE 54 KW 208, 240, 480 Delta CE 60 KW 208, 240, 480 Delta CE 72 KW 208, 240, 480 Delta, CE 108 KW 208, 240, 480 Delta CE 120 KW 208, 240, 480 Delta CE 144 KW 208, 240, 480 Delta, Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29,

8 CES Series Eyewash & Emergency Shower Water Heaters The CES Series is designed to heat water for emergency eyewash stations and emergency drench showers to meet OSH requirements. CES 12 kw through CES 36 kw units should be used solely for eyewash station applications. Depending on size, they will heat up to 7 gallons per minute by 35 F (20 C) and limit the output temperature to OSH requirements. CES 48 kw through CES 144 kw units will meet OSH requirements for many installations including emergency showers. You must test your incoming water temperature on a cold day to verify the size unit you need to comply with requirements. Only the largest units will be sufficient for temperate climates. Customers should target 85 F for best results and must attain 60 F to meet regulations, which also require at least 20 GPM per minute per shower for 15 minutes to comply, plus the drench station at 3 GPM, plus the eyewash station requirements. Features Meets all OSH and NSI Z requirements NEM 3 enclosures are standard 316L Stainless steel heat exchangers 840 Incoloy sheathing material for the elements ctivates on demand at.25 GPM Output temperature range Fahrenheit ctual and customer requested output temperatures viewable through window in the front panel Rocker switch on outside of unit adjusts temperature in one degree increments Individually fused elements Four over-temperature protections Dynamic load balancing ensures even element wear Freeze protection is a standard feature Minimal pressure drop. See charts on website for details Easily serviced on site ll machining, welding, assembly, and testing done in Sarasota, Florida Each unit tested for 1 hour at full load amp draw Conforms to NSI/UL-499 Certified to Can/CS Std. C22.2 No. 88. Options NEM 4 and 4x enclosures are available Latent heat disposal system available to ensure output temperature does not rise more than 6 F when flow drops from 20 GPM+ to 2 GPM Purge systems available for use in Class 1 Div 2 areas RS 232 interface available to allow remote monitoring and control Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29, 2018

9 CES Series Products and Capabilities Part Number Voltage kw Full Load mp Draw Temperature Range F (=djustable F=Fixed) Pipe Size Inches Enclosure Size Includes Fittings (W x H x D) CES 12 KW CES 12 KW 480 Y 480 Wye ¾ 22.5 x 23 x 7.5 CES 12 KW ¾ 22.5 x 23 x 7.5 CES 15 KW CES 15 KW 480 Y 480 Wye ¾ 22.5 x 23 x 7.5 CES 15 KW ¾ 22.5 x 23 x 7.5 CES 18 KW CES 18 KW 480 Y 480 Wye ¾ 22.5 x 23 x Delta available at added cost CES 18 KW ¾ 22.5 x 23 x 7.5 CES 24 KW CES 24 KW ¾ 22.5 x 32.5 x 7.5 CES 24 KW ¾ 22.5 x 32.5 x 7.5 CES 27 KW CES 27 KW ¾ 22.5 x 32.5 x 7.5 CES 27 KW ¾ 22.5 x 32.5 x 7.5 CES 36 KW CES 36 KW ¾ 22.5 x 32.5 x 7.5 CES 36 KW ¾ 22.5 x 32.5 x 7.5 CES 36 KW ¾ 22.5 x 32.5 x 7.5 CES 48 KW CES 48 KW ¾ or x 44 x 8 CES 48 KW ¾ or x 44 x 8 CES 54 KW CES 54 KW ¾ or x 44 x 8 CES 54 KW ¾ or x 44 x 8 CES 60 KW CES 60 KW ¾ or x 44 x 8 CES 60 KW ¾ or x 44 x 8 CES 72 KW CES 72 KW ¾ or x 44 x 8 CES 72 KW ¾ or x 44 x 8 CES 72 KW ¾ or x 44 x 8 CES 108 KW CES 108 KW ¼ 50 x 36 x 12 CES 120 KW CES 120 KW ¼ 50 x 36 x 12 CES 144 KW CES 144 KW ¼ 50 x 36 x 12 CES 144 KW ¼ 50 x 36 x 12 3-Phase Voltages vailable kw GPM heated by 40 F ssumes 85 F output with 45 F input GPM heated by 35 F ssumes 80 F output with 45 F input GPM heated by 25 F ssumes 70 F output with 45 F input Maximum water flow at 40 PSI ES 12 KW 208, 240 (Single Phase) CES 12 KW 208, 240, 480 Wye CES 15 KW 208, 240, 480 Wye CES 18 KW 208, 240, 480 Wye or Delta CES 24 KW 208, 240, 480 Delta CES 27 KW 208, 240, 480 Delta CES 36 KW 208, 240, 480 Delta, CES 48 KW 208, 240, 480 Delta CES 54 KW 208, 240, 480 Delta CES 60 KW 208, 240, 480 Delta CES 72 KW 208, 240, 480 Delta, CES 108 KW 208, 240, 480 Delta CES 120 KW 208, 240, 480 Delta CES 144 KW 208, 240, 480 Delta, Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29,

10 CERO Series Caustic Fluid Heaters CERO Series models have titanium sheathed elements that will last longer in a caustic environment than standard Incoloy sheathed elements. CERO Series are electronically-controlled water heaters that calculate the amount of energy needed to meet hot water demand, then activating the minimum number of elements necessary to satisfy that demand. No energy is used when the unit is idle other than the pilot light. Features NEM 3 enclosures are standard 316L Stainless steel heat exchangers Titanium sheathing for the elements ctivates on demand at.25 GPM Output temperature range Fahrenheit ctual and customer requested output temperatures viewable through window in the front panel Rocker switch on outside of unit adjusts temperature in one degree increments Individually fused elements Easily serviced on site ll machining, welding, assembly, and testing done in Sarasota, Florida Each unit is tested at full and partial load MP draw to ensure measurement accuracy and proper operation Options NEM 4 and 4x enclosures are available RS 232 interface available to allow remote monitoring and control 316 stainless steel heat exchangers available Conforms Tested to to NSI/UL-499 Certified to Can/CS Std. C22.2 No. 88. mp Draw Dimensions Output Fittings Standard 208 V 240 V 480 V 575 V Max. Width Height Depth Shipping Shipping BTU/hr Enclosure Operating Pressure Weight Mode CERO 18 kw 61,416 ¾ NEM UPS Custom Carton CERO 27 kw 92,124 ¾ NEM UPS Custom Carton CERO 36 kw 122,832 ¾ NEM UPS Custom Carton Mounting Wall Brackets Wall Brackets Wall Brackets CERO 54 kw 182,248 ¾ or 1 NEM Skid Wall Brackets CERO 72 kw 245,664 ¾ or 1 NEM Skid Wall Brackets 3-Phase Voltages vailable kw GPM heated by 40 F GPM heated by 60 F GPM heated by 80 F Maximum water flow at 40 PSI CERO 18 KW 240, 480 Wye CERO 27 KW 240, 480 Delta CERO 36 KW 240, 480 Delta CERO 54 KW 240, 480 Delta CERO 72 KW 240, 480 Delta Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29, 2018

11 Engineering Specifications Power Inlet/Outlet Heat Number Element Recommended Breakers and Full Load mp Draw 1 Output Size Weight Enclosure Dimensions Output of Size 208 V 240 V of Model inches pounds width height depth btu/hr Elements watts breaker amp breaker amp breaker amp breaker amp draw draw draw draw 12 kw ¾ , kw ¾ , kw ¾ , kw ¾ , kw ¾ , kw ¾ kw ¾ or , kw ¾ or , kw ¾ or , kw ¾ or , kw 1 or 1¼ ¼ 225 9¼ 276, or 24 or 48 or kw 1 or 1¼ ¼ 22¼ 9¼ 307, or 24 or 48 or kw 1 or 1¼ ¼ 22¼ 9¼ 368, or 350 or 24 or 48 or 12 or kw 2 1¼ , kw 2 1¼ , ssumes individually fused elements. Units made after 1/1/15 have individual fused elements. Units made prior to 1/1/15 have the maximum breaker size shown on the front cover label. Check local code for breaker size in your area kw & 144 kw models can be ordered in a 36x36x12 NEM 3 enclosure. Flow Rate vs Temp. Rise Power Flow Rate Temperature Rise degrees Fahrenheit Output gallons/hr. of Model gallons/min kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph kw gpm gph ssumes 1¼ pipe size ll Tankless Inc. water heaters can be plumbed individually or in manifold to create larger systems Whitfield Park ve Sarasota Fl tankless fax info@hotwaterheater.com March 29,

12 2060 Whitfield Park ve Sarasota Fl tankless fax Due to our continuous process of engineering and technological advancement, specifications may change without notice.