FCM-801. Data sheet. Stationary Power Unit, PEM hydrogen fuel cell module (FCM) 48V DC; 1.2kW. Features

Transcription

1 Data sheet FCM-801 Stationary Power Unit, PEM hydrogen fuel cell module (FCM) 48V DC; 1.2kW Intelligent Energy delivers clean energy solutions for the distributed energy, diesel replacement, automotive and aerial drone markets. Working with international companies, Intelligent Energy aims to embed its fuel cell stack technology into applications across its target market sectors. With its principal facility and headquarters in Loughborough, UK, the company also operates in Japan, India, China, Singapore, France and the US. Please contact us for availability and pricing. Further Information Running on hydrogen and oxygen from the air, the FCM is designed as a self-contained power solution with all requisite balance-of-plant components to produce clean DC power in a power-dense and convenient package. The compact and modular unit can be deployed to deliver power for a wide range of electricity needs to keep your critical applications working, when you need them most. Features Lower life-cycle costs than standby diesel generators; with minimal service requirements Zero harmful system emissions Quiet operation Lightweight and compact design for manual handling Small footprint Regulated output designed for hybridisation with a 48V battery array Proven and reliable fuel cell system technology Utilises Intelligent Energy s air-cooled AC64 fuel cell technology with robust metal fuel cell construction Assured power availability Modular, scalable system Simple balance-of-plant Applications Telecommunications Disaster recovery Portable power generation Backup power Emergency power Off-grid power Microgrids Auxillary power units Material handling equipment

2 Intelligent Energy FCM specifications Performance Rated net power 1 1.2kW Output voltage regulation to ETS Rated current Emissions 48V Water vapour Fuel Fuel type Hydrogen gas Fuel pressure Fuel consumption Fuel storage mbarg Less than 60g per kwh External storage available separately. Compatible with reformer technology or compressed hydrogen gas Fuel composition 99.9% gaseous hydrogen or better 2 Operations and maintenance User interface Options available 3,8 Start-up time Automatic start/stop Manual start/stop Less than 10s Standard Available Installation Indoor 4,8 Safety and health monitoring Certification Designed in accordance with CE Health monitoring Options available 5,8 Physical Net weight ~12kg Max dimensions Connections, gas Connections, electrical 225mm (W) 300mm (H) 550mm (D) G1/8 parallel BSP threaded port with face seal, female Power terminals 2 M10, 4 PFCs, 1 CAN hi/low/gnd, 1 300mA lamp driver, 1 FCM run input, 1 FCM enable input Normal operating conditions Altitude m 6,8 Operating ambient temperature range +5 C to +50 C 8 Relative humidity 10 to 90% 7,8 Storage temperature -40 C to 70 C 1 >95% duty cycle 2 According to quality characteristics of Type 1, Grade E and Category 3 hydrogen fuel specified in BS ISO :2014(E) 3 CAN interface can be provided 4 Options available for outdoor installation 5 Options available for continuous health monitoring and predictive maintenance scheduling for high system availability 6 Rated power to 1500m. Power de-rate commences above 1500m 7 Rated power from 30%. Power de-rate commences below 30% 8 Please contact us to discuss your requirements +44 (0) sales@intelligent-energy.com intelligent-energy.com Intelligent Energy Limited All Rights Reserved. The Intelligent Energy name, logo, and other trade brands/names referenced herein are trademarks or registered trademarks of Intelligent Energy Ltd or its group companies. Disclaimer: The information contained in this publication is intended only as a guide and is subject to change as a result of the constant evolution of Intelligent Energy s business and its technology. This publication and its contents (i) are not definitive or contractually binding; (ii) do not include all details which may be relevant to particular circumstances; and (iii) should not be regarded as being a complete source of information. To the fullest extent permitted by law, Intelligent Energy offers no warranty as to the accuracy of the content of this publication, shall not be liable for the content of this publication and no element of this publication shall form the basis of any contractual relationship with a third party or be used by any third party as the basis for its decision to enter into a contractual relationship with Intelligent Energy. Published by: Intelligent Energy Ltd, Charnwood Building, Holywell Park, Ashby Road, Loughborough LE11 3GB (Registered in England with company number: ). Printed June 2017.

3 Data sheet FCM-802 Stationary Power Unit, PEM hydrogen fuel cell module (FCM) 48V DC; 2.4kW Intelligent Energy delivers clean energy solutions for the distributed energy, diesel replacement, automotive and aerial drone markets. Working with international companies, Intelligent Energy aims to embed its fuel cell stack technology into applications across its target market sectors. With its principal facility and headquarters in Loughborough, UK, the company also operates in Japan, India, China, Singapore, France and the US. Please contact us for availability and pricing. Further Information Running on hydrogen and oxygen from the air, the FCM is designed as a self-contained power solution with all requisite balance-of-plant components to produce clean DC power in a power-dense and convenient package. The compact and modular unit can be deployed to deliver power for a wide range of electricity needs to keep your critical applications working, when you need them most. Features Lower life-cycle costs than standby diesel generators; with minimal service requirements Zero harmful system emissions Quiet operation Lightweight and compact design for manual handling Small footprint Regulated output designed for hybridisation with a 48V battery array Proven and reliable fuel cell system technology Utilises Intelligent Energy s air-cooled AC64 fuel cell technology with robust metal fuel cell construction Assured power availability Modular, scalable system Simple balance-of-plant Applications Telecommunications Disaster recovery Portable power generation Backup power Emergency power Off-grid power Microgrids Auxillary power units Material handling equipment

4 Intelligent Energy FCM specifications Performance Rated net power 1 2.4kW Output voltage regulation to ETS Rated current Emissions 48V Water vapour Fuel Fuel type Hydrogen gas Fuel pressure Fuel consumption Fuel storage mbarg Less than 60g per kwh External storage available separately. Compatible with reformer technology or compressed hydrogen gas Fuel composition 99.9% gaseous hydrogen or better 2 Operations and maintenance User interface Options available 3,8 Start-up time Automatic start/stop Manual start/stop Less than 10s Standard Available Installation Indoor 4,8 Safety and health monitoring Certification Designed in accordance with CE Health monitoring Options available 5,8 Physical Net weight ~20kg Max dimensions Connections, gas Connections, electrical 450mm (W) 300mm (H) 550mm (D) G1/8 parallel BSP threaded port with face seal, female Power terminals 2 M10, 4 PFCs, 1 CAN hi/low/gnd, 1 300mA lamp driver, 1 FCM run input, 1 FCM enable input Normal operating conditions Altitude m 6,8 Operating ambient temperature range +5 C to +50 C 8 Relative humidity 10 to 90% 7,8 Storage temperature -40 C to 70 C 1 >95% duty cycle 2 According to quality characteristics of Type 1, Grade E and Category 3 hydrogen fuel specified in BS ISO :2014(E) 3 CAN interface can be provided 4 Options available for outdoor installation 5 Options available for continuous health monitoring and predictive maintenance scheduling for high system availability 6 Rated power to 1500m. Power de-rate commences above 1500m 7 Rated power from 30%. Power de-rate commences below 30% 8 Please contact us to discuss your requirements +44 (0) sales@intelligent-energy.com intelligent-energy.com Intelligent Energy Limited All Rights Reserved. The Intelligent Energy name, logo, and other trade brands/names referenced herein are trademarks or registered trademarks of Intelligent Energy Ltd or its group companies. Disclaimer: The information contained in this publication is intended only as a guide and is subject to change as a result of the constant evolution of Intelligent Energy s business and its technology. This publication and its contents (i) are not definitive or contractually binding; (ii) do not include all details which may be relevant to particular circumstances; and (iii) should not be regarded as being a complete source of information. To the fullest extent permitted by law, Intelligent Energy offers no warranty as to the accuracy of the content of this publication, shall not be liable for the content of this publication and no element of this publication shall form the basis of any contractual relationship with a third party or be used by any third party as the basis for its decision to enter into a contractual relationship with Intelligent Energy. Published by: Intelligent Energy Ltd, Charnwood Building, Holywell Park, Ashby Road, Loughborough LE11 3GB (Registered in England with company number: ). Printed June 2017.

5 Data sheet FCM-804 Stationary Power Unit, PEM hydrogen fuel cell module (FCM) 48V DC; 4.0kW Intelligent Energy delivers clean energy solutions for the distributed energy, diesel replacement, automotive and aerial drone markets. Working with international companies, Intelligent Energy aims to embed its fuel cell stack technology into applications across its target market sectors. With its principal facility and headquarters in Loughborough, UK, the company also operates in Japan, India, China, Singapore, France and the US. Please contact us for availability and pricing. Further Information Running on hydrogen and oxygen from the air, the FCM is designed as a self-contained power solution with all requisite balance-of-plant components to produce clean DC power in a power-dense and convenient package. The compact and modular unit can be deployed to deliver power for a wide range of electricity needs to keep your critical applications working, when you need them most. Features Lower life-cycle costs than standby diesel generators; with minimal service requirements Zero harmful system emissions Quiet operation Lightweight and compact design for manual handling Small footprint Regulated output designed for hybridisation with a 48V battery array Proven and reliable fuel cell system technology Utilises Intelligent Energy s air-cooled AC64 fuel cell technology with robust metal fuel cell construction Assured power availability Modular, scalable system Simple balance-of-plant Applications Telecommunications Disaster recovery Portable power generation Backup power Emergency power Off-grid power Microgrids Auxillary power units Material handling equipment

6 Intelligent Energy FCM specifications Performance Rated net power 1 4.0kW Output voltage regulation to ETS Rated current Emissions 48V Water vapour Fuel Fuel type Hydrogen gas Fuel pressure Fuel consumption Fuel storage mbarg Less than 60g per kwh External storage available separately. Compatible with reformer technology or compressed hydrogen gas Fuel composition 99.9% gaseous hydrogen or better 2 Operations and maintenance User interface Options available 3,8 Start-up time Automatic start/stop Manual start/stop Less than 10s Standard Available Installation Indoor 4,8 Safety and health monitoring Certification Designed in accordance with CE Health monitoring Options available 5,8 Physical Net weight ~22kg Max dimensions Connections, gas Connections, electrical 450mm (W) 300mm (H) 550mm (D) G1/8 parallel BSP threaded port with face seal, female Power terminals 2 M10, 4 PFCs, 1 CAN hi/low/gnd, 1 300mA lamp driver, 1 FCM run input, 1 FCM enable input Normal operating conditions Altitude m 6,8 Operating ambient temperature range +5 C to +50 C 8 Relative humidity 10 to 90% 7,8 Storage temperature -40 C to 70 C 1 >95% duty cycle 2 According to quality characteristics of Type 1, Grade E and Category 3 hydrogen fuel specified in BS ISO :2014(E) 3 CAN interface can be provided 4 Options available for outdoor installation 5 Options available for continuous health monitoring and predictive maintenance scheduling for high system availability 6 Rated power to 1500m. Power de-rate commences above 1500m 7 Rated power from 30%. Power de-rate commences below 30% 8 Please contact us to discuss your requirements +44 (0) sales@intelligent-energy.com intelligent-energy.com Intelligent Energy Limited All Rights Reserved. The Intelligent Energy name, logo, and other trade brands/names referenced herein are trademarks or registered trademarks of Intelligent Energy Ltd or its group companies. Disclaimer: The information contained in this publication is intended only as a guide and is subject to change as a result of the constant evolution of Intelligent Energy s business and its technology. This publication and its contents (i) are not definitive or contractually binding; (ii) do not include all details which may be relevant to particular circumstances; and (iii) should not be regarded as being a complete source of information. To the fullest extent permitted by law, Intelligent Energy offers no warranty as to the accuracy of the content of this publication, shall not be liable for the content of this publication and no element of this publication shall form the basis of any contractual relationship with a third party or be used by any third party as the basis for its decision to enter into a contractual relationship with Intelligent Energy. Published by: Intelligent Energy Ltd, Charnwood Building, Holywell Park, Ashby Road, Loughborough LE11 3GB (Registered in England with company number: ). Printed June 2017.