DIAPHRAGM LIQUID PUMP

Transcription

1 DIAPHRAGM LIQUID PUMP NF 2.35 NF 2.35 DCB-A Concept KNF diaphragm liquid pumps are based on the principle of the oscillating displacement pump which is remarkably simple in design. The circular power from the motor is convert ed into vertical movement by an eccentric. This motion is then transferred to a diaphragm by means of a connecting rod which, in conjunction with an inlet and outlet valve, creates a pumping action. The NF 2.35 liquid pump can be mounted in any position. It delivers up to 350 ml/min and will operate against pressures of up to 160 mwg. Features Small and powerful Micro design and maximum performance resulting from built-in technology are the outstanding characteristics of these products. Self-priming Sophisticated diaphragm technology and precise valve structures enable performances of 3 mwg suction and 160 mwg pressure. Extreme chemical resistance The use of materials such as PEEK, und FFPM for the parts which come in contact with the liquid allows many neutral or corrosive liquids to be pumped. Dry running, durable and maintenance free The carefully considered design of these pumps allows them to be run dry and ensures safe operation and a long life even under the most severe conditions. Area of use The versatility of KNF pumps allows a wide ield of applications to be covered. Over many years our pumps have proved themselves in the following areas: Analysers Medicine Pharmaceutical Fuel cells Reforming Laboratory Filtration Chromatography Cleaning industry Cuvette cleaning Sterilisers Industrial washing machines Printing Ink jet printing Photographic/ilm development Other applications for micro-diaphragm liquid pumps include: hydrogen generators, CD coating, dental technology, textiles and many more. PERFORMANCE DATA Type Flow rate (ml/min) max. suction height (mwg) max. pressure head (mwg) NF 2.35 DCB-B

2 THE KNF MODULAR CONCEPT OF SELECTION General note This Data Sheet provides an overview of the options with our NF 2.35 pumps. Certain standard options will be explained in more detail where necessary. Flow curves The low curves illustrate how the low rate changes in relation to the pressures before and after the pump. In the case of a combination of both we would be very happy to advise what the expected low rate would be. The values given in the curves are dependant upon the liquid, choice of head materials and the type of hoses being used. Therefore a cert ain deviation is to be expected. Note: The low rate is measured with water at 20 C. 1 Materials of head components KNF offers a wide range of different materials for those parts which come in contact with the liquid thus allowing the possibility of pumping most liquids. 2 Motors DCB-A Compact brushless direct current motor The brushless motors are electronically commutated and thus do not suffer from brush wear. This allows us to achieve long lifetimes similar to AC motors. Option for external motor speed control using PWM or a 0-5 V DC signal. On project request other motors are available. Modules Our versatile self-selection program allows you to personally determine the optimum characteristics that you require from your pump. Select your diaphragm pump from the following characteristics: 1 MATERIALS OF HEAD COMPONENTS XP XT 2 MOTORS DCB-A 3 VOLTAGES Head Valves O-Rings Diaphragm Resonating diaphragm Head Valves O-Rings Diaphragm Resonating diaphragm Brushless direct current motor 12 / 24V Direct current motor PUMP TYPE PEEK PTFE Basic model PEEK FFKM FFKM PTFE coated PTFE e.g. NF 2.35 XP DCB-A 24V 3 Voltages Choose from the different electrical connection possibilities. Special variations are available. 4 Hydraulic connections Plug-in coupling 4.0 mm Tubing OD x ID 4.0 x 2.5 mm 2

3 NF 2.35 DCB-A PERFORMANCE Type Flow rate at atmos. pressure (ml/min) Suction height (mwg) NF Pressure head (mwg) Type Voltage (V) Power rating (W) 10 DCB-A 12V / 24V I max. load. (A) 0.8 / 0.4 I max. (A) 1.0 / 0.5 EMV guidelines EN EN EN EN Weight (g) 200 Motor protection factor IP 54 NF 2.35 DCB-A NF 2.35 DCB-A FLOW CURVE 0.40 Flow rate [l/min] Recomended operation range Suction [bar] Pressure [bar] 3

4 ACCESSORIES, OPTIONS Other accessories Tubing Anti-vibration mounts Further options Other head materials Motors with special voltages or frequencies Speciic customers requirments such as special connections (Molex, AMP, etc.) and customized hydraulic connections DCB motor with 4 leads - Input: 0-5 V - Output: impuls DC motor ID Nr , We reserve the right to make technical changes. KNF Flodos AG, Wassermatte 2, 6210 Sursee, Switzerland 4

5 YOUR LOCAL PARTNER AROUND THE WORLD KNF SALES ORGANIZATION Australia KNF Regional Office Moreland West VIC 3055 Tel info@knf.com.au Benelux Netherlands KNF Verder B.V GG Vleuten Tel info@knf-verder.nl India KNF Pumps + Systems (India) Pvt. Ltd. Hinjewadi Pune Tel info@knfpumps.in Italy KNF Italia S.r.l Cernusco s. Naviglio (MI) Tel info@knf.it Singapore KNF Regional Office Tel info@knf.com.sg Sweden, Finland, Denmark, Norway KNF Neuberger AB Stockholm Tel info@knf.se Benelux Belgium and Luxemburg KNF Verder N.V Aartselaar Tel info@knf.be China KNF Technology (Shanghai) Co., Ltd. Shanghai Tel info@knf.com.cn France KNF Neuberger SAS Village-Neuf Tel info@knf.fr Germany KNF Neuberger GmbH Freiburg Tel info@knf.de Japan KNF Japan Co. Ltd. Tokyo Tel info@knf.co.jp Korea KNF Neuberger Ltd Seoul Tel knf@knfkorea.com Latin America KNF Regional Office Tel gb@knf.com Morocco, Tunisia, Algeria KNF Neuberger SAS Village-Neuf Tel info@knf.fr Switzerland KNF Neuberger AG 8362 Balterswil Tel knf@knf.ch UK, Ireland KNF Neuberger U.K., Ltd. Witney, Oxfordshire OX28 4FA Tel info@knf.co.uk USA, Canada KNF Neuberger, Inc. Trenton, NJ Tel knfusa@knf.com KNF PRODUCT CENTERS Gas Pumps KNF Neuberger GmbH DE Freiburg info@knf.de Micro Gas Pumps KNF Micro AG CH-6260 Reiden info@knf-micro.ch Liquid Pumps KNF Flodos AG CH-6210 Sursee info@knf-flodos.ch