LFP Luci Power FLEX IP65

Transcription

1 Indoor Strip Light LFP Luci Power FLEX IP65 Color management CIE years warranty - Short cuttable unit suitable for furniture lighting, and for unpredictable requirements on site (0mm in LFP5, 40mm in LFP) - types of wattage (5.4W,.5W per meter) - Customized length available up to 5m per roll Product Series Series code Wattage/m Lumen/m CRI Cuttable unit Warm white 700K Luci Power FLEX EX LFPEX LFPEX5 8. w/m 496 lm/m Ra 9 8. mm Custom order Max. length Diffser Tube IP65 avaiable LFPEX. w/m 6lm/m Ra 9 5 mm LFPEX0(9.5W) 9.5 w/m 695 lm/m Ra mm m N/A LFPEX0(6.5W) 6.5 w/m 56 lm/m Ra mm LFPEX0(4.5W) 4.5 w/m 7 lm/m Ra mm Luci Power FLEX LFP LFP5 5.4 w/m 790 lm/m 0 mm 4.5m Ra 90 LFP.5 w/m 56 lm/m 40 mm 5m Luci Power FLEX THOF LFPTH LFPTH w/m 8 lm/m Ra mm N/A N/A N/A N/A Luci Flat FLEX F LFTF LFTF.9 w/m 8 lm/m 6.4 mm Ra 87 LFTF6.5 w/m 76 lm/m mm 5m Luci Power FLEX α LFPA LFPA.4 w/m 586 lm/m Ra mm N/A N/A N/A N/A Luci FLEX α F LFXF LFXF.9 w/m 5 lm/m Ra mm 5m

2 Indoor Strip Light LFP Luci Power FLEX Indoor Color management CIE years warranty Model No. LFP I Product Name / LED pitch LFP5 : 5mm pitch LFP : mm pitch Length Light source color Tube type Environment Luci Power FLEX Custom order length>p.8 D : Daylight white N : Natural white W : White WW : Warm white 0K L0 : Warm white 000K L7 : Warm white 700K L4 : Warm white 400K L9 : Warm white 900K B : Blue CL : Clear I : Indoors Light Intensity LFP L7-CL-I LFP-0-L7-CL-I / illuminance angle 65 4 Specification LED pitch 5mm pitch mm pitch Model No. LFP CL-I LFP-0--CL-I Power consumption.9w/900mm.5w/m Fitting length(l) 9mm mm Weight 55g 60g Cuttable unit 0mm ( LED) 40mm ( LED) Luminaire efficacy(700k) 65.8 lm/w 6.6 lm/w 0 0 Light source color = Device inventory* = Equivalent = Please contact us since it is made-to-order products and has MOQ. D 7K Ra lm N K Ra lm W 40K Ra lm WW 0K Ra lm L0 000K Ra 90 7 lm L7 700K Ra 90 7 lm L4 400K Ra lm L9 900K Ra 70 B Blue 698 lm 69 lm 667 lm 69 lm 579 lm 56 lm 459 lm 5 lm Specification may be subject to change without announcement. The optical data provided on the each product pages are for reference only; the data values are not guaranteed. Please use as reference materials for your planning. General Specification Input voltage DC4V LED beam angle Environment Indoors (no condensation) Max. length per circuit 5mm pitch mm pitch 4.5m 5m Min. bending range Rmm Material (body) Soft acrylic Attachments End cap pcs Option parts Mounting rail Mounting clip End cap Certification CE Dimmable Power Supplies Required External dimensions 5mm pitch top view Cuttable Point 0 mm pitch top view Cuttable Point 40 5 ± ± Max. connectable length per power supply Length of LED fixture (70% loading factor)*: split into multiple circuits 5mm pitch mm pitch Power supply.m. W power supply 4.5m 6.6m* W power supply 6.8m* m* W power supply 4 LFP Luci Power FLEX Indoor

3 Optional parts for straight for straight for straight for curved Mounting rail 0 for Power FLEX Option Parts Model No : LFP-RL0 For straight installation. 8.4 front view Mounting rail 900 for Power FLEX (L=900mm type Option Parts Model No : LFP-RL0900 For straight installation. front view 8 85± Mounting rail 0 for Power FLEX Option Parts Model No : LFP-45RL0 For tilting LED fixture in 45 degree Aluminum mounting rail 0 for Power FLEX Option Parts Model No : LFP-RL0-AL For straight installation. front view.6 970± ± (8.4) Mounting clip for Power FLEX Option Parts Model No : LFP-RC 5 pcs/ bag End cap for Power FLEX Attachment Option Parts Model No : LFP-EC pcs included, pcs/ bag as option parts For sealing the open end of LED fixture after cutting. Sealing glue is required to supply by installer. Acrylic glue is recommended. 4.5 Screw hole :4 4.5 Screw hole :4 front view 970± Screw hole : Screw hole :4 front view 7 front view 5.9 Screw hole :4.5. pan head screw M Attachment Mounting clip for rail Model No : LFP-PT 5 pcs / bag is included 6 5. pan head screw M Attachment Mounting clip for rail Model No : LFP-PT 5 pcs / bag is included.6 pan head screw M pan head screw M Indoor Strip Light LFP Power FLEX EX Power FLEX Power FLEX α Power FLEX THOF Flat FLEX F FLEX α F Luci Power FLEX Indoor LFP 5

4 Installing the product Straight installation Screw fixing The Mounting rail should be preset on the installation spot with screws supplied by installer. (Pan head screws M recommended.) Install the LED fixture with mounting clips for rail to ensure the straight and flat installation. Cove lighting Option Parts Mounting rail 0 for Power FLEX (LFP-RL0) Mounting clip bundled with a rail Attachments Mounting clip for rail (LFP-PT) Cornice lighting Option Parts Mounting rail 0 for Power FLEX (LFP-RL0) Attachments Mounting clip for rail (LFP-PT) Bonding Install the mounting rail with acrylic compatible adhesive where screws cannot be fastened. For downward installation, mounting clips for rail can prevent falling. Straight installation by 45 degreee rail Screw fixing Tilting LED fixture in 45 degree. The 45 degree Mounting rail should be preset on the installation spot with screws supplied by installer. (Pan head screws M recommended.) Install the LED fixture with mounting clips for rail to ensure the straight and flat installation. Cove lighting Option Parts 45Mounting rail 0 for Power FLEX (LFP-45RL0) Cornice lighting Mounting clip bundled with a rail Attachments Mounting clip for rail (LFP-PT) Option Parts 45Mounting rail 0 for Power FLEX (LFP-45RL0) For downward installation, mounting clips for rail can prevent falling. Curved installation Screw fixing Place the LED fixture on the installation spot and fix the mounting clips by screw supplied by installer. (Pan head screws M recommended.) Option Parts Mounting clip for Power FLEX (LFP-RC) Bonding Install the mounting clips with acrylic compatible adhesive where screws cannot be fastened. Rmm 6 LFP Luci Power FLEX Indoor

5 Cutting of lamp fitting The cuttable unit of Luci Power FLEX is LEDs. Failure will caused by cutting on incorrect position. End cap is required for sealing the open end of LED fixture after cutting. Sealing glue should be supplied by installer.acrylic glue is recommended. Connecting to the power supply Cables used for connecting LED fixtures and Power supply must be a suitable type and gauge. Cables should be joined with suitable terminal block or methods as appropriate to the installation and operating environment. Caution: When using a long cable with thin dimension, the resistance of cable will increase. Voltage drop and heat dispatching may occur and result in brightness decreasing. Caution: When separating one cable to multiple circuits in the same gauge, the current loading focuses on the junction of the branch circuit and high temperature will liberate on there.please consider the loading of the power supply (quantity of LED fixture) and review the wiring system to avoid the above problem. System configuration diagram Max. connectable length depends on the wattage of the power supply. Max. length per circuit of Luci Power FLEX 5 mm pitch is 4.5m, Luci Power FLEX mm pitch is 5m. If it exceeds, please split into multiple circuits. Max. distance from the power supply to the end of LED fixture is m. Power supply DC4V LED pitch Cuttable unit : LED +4V +4V Expanded When connecting the dimmer driver with power supply, unpredicted noise might occur. It is a characteristic of electronic devices, not a malfunction of the LED fixture. Please choose an appropriate power supply and consider a place to install. Reducing the loading factor of LED fixture might improve the noise from the power supply while the noise for the LED fixtures might be improved by splitting the circuit of LED fixtures into multiple. Max. distance m Circuit LED fixture max. LFP5 : 4.5m LFP : 5m Circuit Circuit Indoor Strip Light LFP Power FLEX EX Power FLEX Power FLEX α Power FLEX THOF Flat FLEX F FLEX α F Luci Power FLEX Indoor LFP 7

6 Luci Power FLEX Indoor -Custom order- Model No. LFP LED Pitch -T Length Lead Wire - Light source color - Tube -I LED Pitch 5mm Pitch 5 mm Pitch Length Refer to "Custom order products size" Lead Wire One end lead wire S Both ends lead wire W Light source color Daylight White 7K D Natural White K N White 40K W Warm white 0K 0K WW Warm white 000K 000K L0 Warm white 700K 700K L7 Warm white 400K 400K L4 Warm white 900K 900K L9 Blue B 5 5 Tube Clear CL Diffuser DF External dimensions Luci Power FLEX Indoor / one end lead wire Length Length + - The lead wires are delivered without connectors. Contact us if indoor connectors are needed. Luci Power FLEX Indoor / both ends lead wire W S Length = Please contact us since it is made-to-order products and has MOQ. Note: - and color temperature of diffuser tube type are different from clear tube type. In addition, non- uniform color among each LED package may be more pronounced when using diffuser tube. 90 Length + 90 Custom order products size Luci Power FLEX 5mm pitch (5.4 W/m) Corresponds to Length of Model No. and External dimensions Luci Power FLEX mm pitch (.5 W/m) Corresponds to Length of Model No. and External dimensions LFP Luci Power FLEX Indoor

7 Direct horizontal surface light intensity distribution chart LFP W-CL-I Light source color 40K 95 cd Luminous flux 88 lm LFP WW-CL-I Light source color 0K 80 cd Luminous flux 774 lm LFP L0-CL-I Light source color 000K 60 cd Luminous flux 7 lm LFP L7-CL-I Light source color 700K 60 cd Luminous flux 7 lm LFP L4-CL-I Light source color 400K 8 cd Luminous flux 608 lm Recommendend dimensions and illumination distribuitions Cornice lighting- CH=800 0 Cornice lighting- CH=800 Cove lighting CH= Indoor Strip Light LFP Power FLEX EX Power FLEX Power FLEX α Power FLEX THOF Flat FLEX F FLEX α F Luci Power FLEX Indoor LFP 9

8 Direct horizontal surface light intensity distribution chart LFP-0-W-CL-I Light source color 40K 8 cd Luminous flux 667 lm / illuminance angle Recommendend dimensions and illumination distribuitions Cornice lighting- CH= LFP-0-WW-CL-I Light source color 0K 8 cd Luminous flux 69 lm / illuminance angle LFP-0-L0-CL-I Light source color 000K 7 cd Luminous flux 579 lm LFP-0-L7-CL-I Light source color 700K cd Luminous flux 56 lm / illuminance angle / illuminance angle 65 0 Cornice lighting- CH= LFP-0-L4-CL-I Light source color 400K 64 cd Luminous flux 459 lm / illuminance angle Cove lighting CH= LFP Luci Power FLEX Indoor

9 Indoor Strip Light LFP Power FLEX EX Power FLEX Power FLEX α Power FLEX THOF Flat FLEX F FLEX α F Luci Power FLEX Indoor LFP

10 Singapore World HQ 5A Tanjong Pagar Road, Singapore Tel : info@luci.co.jp Hong Kong Marketing Office Room 80, 8/F, Kwai Hung Holdings Centre, 89 King's Road, North Point,Hong Kong Tel : info@luci.co.jp Dubai Marketing Office 5WA, DAFZA, Dubai, United Arab Emirates Tel: info@luci.co.jp Group company Tokyo Japan Regional HQ Akasaka Bldg. 4F, 4--, Akasaka, Minato-ku, Tokyo 7-005, Japan Tel : info@luci.co.jp Osaka Office Yotsubashinakano Bldg. F, --4, Minamihorie, Nishi-ku, Osaka-shi, Osaka 5-005, Japan Tel : info@luci.co.jp Group company Shanghai China mainland Regional HQ : Rm.804, South Building, 00 Xuanhua Rd., Changning District, Shanghai(00)PRC. Tel : info@luci.co.jp Beijing Office : Rm.0 Building, (Qingnian Rd) Qingniangongshe., Chaoyang North Rd, Chaoyang District, Beijing(06)PRC. Tel : info@luci.co.jp Partner Company Korea SANSHO Korea CO.,LTD. KOREA SANSHO SHOJI CO.,LTD. #7, 6, Teheran-ro 87gil, Gangnam-gu, Seoul, 0664, Korea Tel: