Auction. Hannibal, Ohio November 4, November 4th, 5th, 6th & 7th Starting at 10:00 am daily

Transcription

1 Auction Hannibal, Ohio November 4, 2014 Ormet November 4th, 5th, 6th & 7th Starting at 10:00 am daily Ormet Aluminum Facility Ohio Route 7 Hannibal, OH King St., Enfield, CT Fax Revere Dr., Northbrook, IL Fax

2 200 Pine St., Suite 800 San Francisco, CA Fax

3 Auction November 4th, 5th, 6th & 7th Starting at 10:00 am daily Ormet Aluminum Facility Ohio Route 7 Hannibal, OH Inspection November 1, 2 & 3 from 9:00 am to 4:00 pm Online Bidding Real time online bidding is available for this sale. Visit for more information Removal Dates Small items must be removed by Friday, November 14, 2014 All items mist be removed by Friday, November 21, 2014 ATTENTION RIGGERS: General Liability Insurance for $2,000,000 required to Capital Recovery Group, Rabin Worldwide, PPL Group LLC and Ormet Corp. Check-out contacts: Clayton Apo clayton.apo@rabin.com A 18% buyer's premium will apply to all items sold.

4 Sales Tax Rabin Worldwide is required by law to collect the applicable sales tax on all items sold unless at the time of purchase the buyer provides the appropriate resale certificate, properly completed, together with some identification which proves the individual is in the business of buying and selling such merchandise within the state. Sales tax will be refunded to out of state buyers when one of the following is provided: Dealers must provide a properly executed bill of lading showing shipment by a third party carrier to an out-of-state location, designating Rabin Worldwide as the shipper accompanied with a properly completed resale certificate from their state, together with some identification which proves the individual is in the business of buying and selling such merchandise within that particular state. Where the state allows exemption from sales tax for buyers who runs a manufacturing business which is known to make use of the kind of equipment being purchased, the buyers must also provide proof that the items will be used for manufacturing within the particular state, and a properly executed bill of lading showing shipment by a third party carrier to an out-of-state location, designating Rabin Worldwide as the shipper. Out of state buyers who are taxable in their state, must show proof that payment of sales tax was made on the merchandise purchased and a properly executed bill of lading showing shipment by a third party carrier to an out-of-state location, designating Rabin Worldwide as the shipper. As designated shipper, Rabin Worldwide is not responsible for any damages to shipment in-transit or any other expenses related to the shipping. Buyers from the State of California must provide resale exemption number at the time of purchase to avoid paying California sales tax. Equipment being used within California is subject to California Use Tax which must be collected at the time of purchase, regardless of the state of purchase. Without appropriate paperwork, all sales tax must be collected at the time of purchase. However, sales tax will be refunded in full at such time as proper documentation has been provided to the auctioneer. Cash Payment Of $10,000 Or Greater For any purchase paid in cash, with a value of $10,000 or greater, the buyer is required to complete United States Treasury Department form number These forms are available from the auctioneer and must be completed and returned to the auctioneer at the time of purchase. The items in this catalog will be sold by a licensed auctioneer, in accordance with local laws governing public auctions, and according to posted Terms of Sale. Anyone else soliciting merchandise that is not listed in this catalog will be asked to leave the premises

5 TERMS AND CONDITIONS OF SALE These Terms and Conditions of Sale ( Sale Terms ) govern all items which are offered for sale by RABIN WORLDWIDE, INC. ( Rabin Worldwide ) and any of its employees, agents, designees, affiliates, joint venture partners, and co-auctioneers (together with Rabin Worldwide, collectively, "RABIN") to a buyer (the Buyer ) of any machinery, equipment or other personal property items offered by RABIN and purchased by Buyer (collectively, the Purchased Items ). The owner of the items upon which Buyer will be bidding may be owned either by Rabin or by another entity who has retained RABIN to sell such items (the Owner ). RABIN reserves the right to modify these Sale Terms at any time and any such modification shall become part of these Sale Terms. By registering at the auction, onsite or online, the Buyer agrees that it has read and fully understands these Sale Terms and agrees to be bound by these Sale Terms. 1. Payment. If Buyer is the winning bidder for the Purchased Items, full payment of the purchase price for the Purchased Items due to RABIN (the Purchase Price ), must be made in United States Dollars, and must be made on the day of sale as set forth in the invoice sent to Buyer at the end of the auction (the Invoice ). Payment is due and payable in cash, by cashier s check, wire transfer, company check, VISA, MasterCard, or American Express credit card payable to Rabin Worldwide. For any Purchased Items paid in cash with a value of $10,000 or greater, Buyer is required to complete United States Treasury Form Number 8300 and return it to RABIN at the time of purchase. Buyer shall pay RABIN a late penalty on all amounts over 30 days past due computed at the greater of (i) 18% per annum, and (ii) the maximum rate permitted by applicable California law. If Buyer fails to pay the Purchase Price in accordance with these Sale Terms, Buyer agrees that it remains responsible for payment of the Purchase Price and RABIN shall have the right to commence all legal actions against Buyer for collection of the entire Purchase Price amount. Buyer shall also be liable for any and all costs and expenses incurred by RABIN arising out of or in connection with RABIN s efforts to collect any unpaid amounts hereunder including, without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by RABIN in taking any action hereunder shall be deemed a waiver of any rights of RABIN hereunder. Until RABIN has received payment in full of the Purchase Price, the Rigger Removal Agreement executed by the rigger named therein (the RRA ), if applicable, and any other documents required by RABIN, Buyer shall have no right to dismantle or remove any of the Purchased Items from the real property located at the auction site (the Real Property ). 2. Taxes. Prices do not include any federal, state or local taxes, which are in addition to the Purchase Price and must be paid by Buyer where applicable and may be added by RABIN to the Invoice unless Buyer furnishes RABIN with an acceptable tax exemption certificate. In addition, any and all foreign duties and taxes are also the responsibility of Buyer and Buyer hereby indemnifies and holds RABIN harmless from any and all claims, costs, expenses and liability incurred by RABIN resulting from Buyer s failure to pay any foreign duties and taxes. If an acceptable tax exemption certificate is not submitted at the time of payment, Buyer may submit said exemption certificate within ten (10) business days to RABIN, and the tax originally paid will be refunded back to the Buyer. The failure of RABIN to include any such federal, state or local taxes does not excuse the Buyer from responsibility for paying any such taxes and Buyer hereby indemnifies and holds RABIN harmless from any and all claims, costs, expenses and liability incurred by RABIN resulting from Buyer s failure to pay any federal, state or local taxes. 3. Buyer s Premium. RABIN will charge and retain a non-negotiable buyer's commission ("Buyer's Premium") on the proceeds of any sale based on the final and accepted bid for the Purchased Items. The Buyer's Premium will be 15% for onsite bidders and 18% for online bidders. There will be an additional 4% handling charge on the total invoice for all credit card transactions. The Buyer's Premium will be posted on the Real Property and announced prior to the auction. 4. Title. Title shall pass to Buyer upon the satisfactory completion of all of the following: (i) RABIN s receipt of full payment for the Purchased Items in accordance with these Sale Terms; (ii) the Purchased Items have been removed from the Real Property in compliance with the RRA, if applicable; (iii) all damage, if any, to the Real Property and to any other personal property located at the Real Property caused by removing the Purchased Items has been repaired to the satisfaction of RABIN and the owner of the Real Property; (iv) Buyer shall not be in breach of any of items set forth in these Sale Terms. 5. INSPECTION. BUYER SHALL BE DEEMED TO HAVE RELIED ENTIRELY UPON ITS OWN INSPECTIONS AND INVESTIGATIONS OF ALL OF THE ITEMS UPON WHICH BUYER WILL BE BIDDING AND/OR PURCHASING. BUYER HEREBY ACKNOWLEDGES THAT BUYER AND BUYER S AGENTS OR REPRESENTATIVES HAVE HAD THE OPPORTUNITY TO INSPECT, OR HAVE INSPECTED, ALL OF THE ITEMS UPON WHICH BUYER WILL BE BIDDING

6 AND/OR PURCHASING. BUYER AGREES THAT BY SUBMITTING A BID FOR ANY ITEM, BUYER SHALL BE DEEMED TO HAVE INSPECTED ALL OF THE ITEMS UPON WHICH BUYER WILL BE BIDDING AND/OR PURCHASING. AFTER A SALE OF PURCHASED ITEMS HAS BEEN CONFIRMED, THE BUYER SHALL BE DEEMED TO HAVE INSPECTED ALL PURCHASED ITEMS AT THE TIME OF SALE CONFIRMATION. 6. Acceptance by Buyer. Buyer agrees that its acceptance of the Purchased Items shall constitute an acknowledgment by Buyer that the Purchased Items satisfies any and all obligations of RABIN hereunder. Buyer may not revoke its acceptance for any reason whatsoever. 7. Safety Standards. Buyer expressly assumes all responsibility to obtain all safety equipment and to meet all applicable local, state and federal laws, regulations and standards in removing any of the Purchased Items. Buyer further agrees to comply with the RRA, if applicable. 8. Removal of Purchased Items. Purchased Items can only be removed from the Real Property within the removal time as announced at the sale and as indicated on the Invoice (the Removal Deadline ). No Purchased Items can be removed, segregated, or dismantled by Buyer before the conclusion of the auction. Prior to removal of any Purchased Items, the entire Invoice for all Purchased Items must be paid in full in order to gain access to the Real Property. Buyer must present a representative of RABIN with an original Invoice marked PAID and a fully executed RRA, if applicable. 9. Failure to Remove Purchased Items/Bankruptcy. If Purchased Items are not removed by the Removal Deadline (i) such Purchased Items will be deemed abandoned by the Buyer, (ii) Buyer shall forfeit all monies paid to RABIN for such Purchased Items, and (iii) Buyer shall forfeit any rights to such Purchased Items. In addition, Buyer shall be responsible for all damages suffered by RABIN, including, but not limited to, any dismantling, transportation, storage or other costs, including attorneys fees and expenses incurred by RABIN as a consequence of Buyer s failure to remove such Purchased Items. Buyer hereby grants to RABIN a security interest in the Purchased Items to secure Buyer s obligation to remove the Purchased Items from the Real Property not later than the Removal Deadline and in compliance with the terms of the RRA, if applicable. Buyer hereby authorizes RABIN the right to file and/or record such documents and financing statements as are necessary or useful to perfect such security interest in the Purchased Items as provided in this Section 9, and Buyer shall execute and deliver to RABIN such documents as requested in connection therewith. In the event Buyer fails to remove the Purchased Items on or before the Removal Deadline, RABIN shall have the right to foreclose its security interest in the Purchased Items by a public or private sale in accordance with applicable law. In addition, in the event any one or more of the following shall occur, any and all obligations of RABIN hereunder, including without limitation, any obligations to Buyer in respect of the Purchased Items shall immediately terminate and without further action by RABIN: (a) Buyer files a voluntary petition in bankruptcy or a bankruptcy petition is filed against Buyer; (b) Buyer becomes insolvent or makes an assignment for the benefit of its creditors; or (c) Buyer discontinues its business or a receiver is appointed for Buyer or its business. 10. Integration; Modifications. Buyer acknowledges that these Sale Terms, the Invoice, the RRA, if applicable, a bill of sale, if applicable, and all attachments and exhibits hereto and thereto, (a) are the only terms and conditions of sale for the Purchased Items, (b) are intended by the parties as a complete and exclusive statement of the terms of their agreement in respect of the Purchased Items, and (c) supersede all prior agreements, written or oral in respect of the auction and Purchased Items, except for any and all announcements made by the auctioneer on the day of the auction concerning the Sale Terms, which Buyer acknowledges and agrees to be bound. Any variation from the terms hereof contained in the Buyer s acceptance of the Purchased Items is hereby rejected. 11. Auction Registration; Deposit. To register for any live auction onsite, bidders must provide a refundable deposit in the amount determined by RABIN and either posted onsite or requested by a RABIN representative, in the form of cash, cashier s check, wire transfer, company check, VISA, MasterCard, or American Express credit card payable to Rabin Worldwide. To register for the online component of any RABIN live auction conducted by bidspotter.com, bidders will be required to submit a valid VISA, MasterCard, or American Express credit card and complete the online registration information. Whether onsite or online, RABIN reserves the right to request a refundable deposit or an increased deposit in an amount warranted by the value of the sale, but in no event greater than 25% of the Purchase Price, if Buyer is the successful bidder of the Purchased Items which shall be paid at the time Buyer becomes the winning bidder of the Purchased Items. If Buyer is the winning bidder for the Purchased Items, the refundable deposit set forth in this Section 11 shall become non-refundable and such amount together with the increased deposit set forth in this Section 11, shall be applied toward payment of the Purchase Price and the provisions of Section 1 will control. The credit card will not be charged except in the event of failure to pay. 12. Online Bids. RABIN will accept bids from Buyers who wish to bid, but cannot attend the auction. The bids must be placed online at All bids will be recorded and synced with those bids received onsite in real time, with the highest bid price, winning the item(s), regardless of being placed online or onsite. Any taxes and/or Buyer s Premium will be added to the winning bid price. Buyers who choose to bid at any auction online using bidspotter.com shall do so at their own risk. RABIN cannot guarantee the transmission of online bids when situations or circumstances

7 beyond RABIN s control interfere with the normal operation of bidspotter.com. RABIN has no responsibility or liability for items lost at auction due to any system malfunction of bidspotter.com. It is the responsibility of the Buyer to follow instructions of bidspotter.com to properly operate the online bidding system. 13. Bidding. If any dispute arises between two or more bidders, the auctioneer has the right in its sole and absolute discretion to determine the winning bidder or to re-offer and resell the item or lot in dispute. RABIN shall have no liability arising from any dispute between two bidders. RABIN reserves the right to group one or more lots into one or more selling items or lots, or to add to or delete items or lots at its sole discretion. RABIN reserves the right to set the bidding increments. RABIN also reserves the right to reject any bid which is only a fractional advance over the preceding bid. RABIN, or the owners, reserves the right to set and/or to modify a minimum price. 14. Hazardous Materials. Buyer acknowledges that Purchased Items may contain Hazardous Materials. BUYER HEREBY INDEMNIFIES, DEFENDS, PROTECTS AND HOLDS HARMLESS, THE INDEMNIFIED PARTIES FROM AND AGAINST ANY AND ALL CLAIMS, DAMAGES, LIABILITIES, ACTIONS, CAUSES OF ACTION, COSTS AND JUDGMENTS, INCLUDING WITHOUT LIMITATION, ATTORNEYS FEES, ARISING FROM OR RELATING TO ANY RELEASE OF ASBESTOS, PCBS OR OTHER HAZARDOUS MATERIALS IN CONNECTION WITH THE REMOVAL AND TRANSPORTATION OF THE PURCHASED ITEMS FROM THE REAL PROPERTY. As used in these Sale Terms Hazardous Materials means (a) substances that are defined or listed in, or otherwise classified pursuant to, any applicable laws or regulations as hazardous substances, hazardous materials, hazardous wastes, toxic substances, or any other formulation intended to define, list, or classify substances by reason of deleterious properties such as ignitability, corrosivity, reactivity, carcinogenicity, reproductive toxicity, or EP toxicity, (b) oil, petroleum, or petroleum derived substances, natural gas, natural gas liquids, synthetic gas, drilling fluids, produced waters, and other wastes associated with the exploration, development, or production of crude oil, natural gas, or geothermal resources, (c) any flammable substances or explosives or any radioactive materials, and (d) asbestos in any form or electrical equipment that contains any oil or dielectric fluid containing levels of polychlorinated biphenyls in excess of 50 parts per million. As used in these Sale Terms, Indemnified Parties means collectively RABIN, the owner of the Real Property, the Owner and their respective managers, officers, directors, shareholders, members, agents, attorneys, employees, successors and assigns. 15. Buyer s Responsibility and Indemnity. Buyer acknowledges the Real Property where items upon which Buyer may be bidding are located, held or presented for inspection, may be potentially dangerous places which may include noxious, corrosive and pressurized substances being present, heavy equipment being operated, and live electric circuits. Buyer and its agents and representatives present at the Real Property before, during or after an auction shall be deemed to be present at their own risk. Buyer further acknowledges that RABIN shall have no liability for any injuries sustained to Buyer and its agents and representatives, nor damages to or loss of property which may occur from any cause whatsoever. Removal of Purchased Items shall be at the sole expense, risk and liability of the Buyer. In addition, all freight and insurance charges are the responsibility of Buyer unless otherwise agreed by RABIN and Buyer in writing. Buyer shall be responsible for and pay all expenses, losses and damages that may arise from the removal and transportation of the Purchased Items from the Real Property, and all losses, damages, debts and liabilities incurred by Buyer in connection with Buyer s purchase and removal of the Purchased Items and all other expenses relating or incidental thereto. BUYER HEREBY INDEMNIFIES, DEFENDS, PROTECTS AND HOLDS HARMLESS, THE INDEMNIFIED PARTIES FROM AND AGAINST ALL SUITS, CLAIMS, COSTS, DAMAGES AND EXPENSES, INJURIES TO ANY PROPERTY OR PERSONS (INCLUDING DEATH) INCLUDING, WITHOUT LIMITATION, ATTORNEYS FEES, ARISING OUT OF OR IN CONNECTION WITH BUYER S ATTENDANCE AT THE AUCTION, VISITS TO THE REAL PROPERTY, PURCHASE, OWNERSHIP, DISMANTLING, REMOVAL FROM THE REAL PROPERTY, TRANSPORTATION, REASSEMBLY, USE AND/OR RESALE OF THE PURCHASED ITEMS, OR THE PERFORMANCE OF ANY OF THE OBLIGATIONS OF BUYER. 16. No Warranties. Neither RABIN nor the Owner make any representations, warranties or guarantees, expressed or implied, as to the genuineness, authenticity, quantity, quality, condition, usability, salability, weight, measure, count, make, model, year, age, mechanical condition, performance, description, or other specifications of any items upon which Buyer will be bidding or in any lot(s). Neither RABIN nor the Owner shall be liable for any fault or defect in any lot(s). RABIN shall not be held liable for any inaccurate, incomplete or incorrect description, of any items or lot(s) upon which Buyer will be bidding, or in any media pertaining to the auction, whether in a catalog, advertisement, website listing, or otherwise. Descriptions of items are prepared FOR GUIDE PURPOSES ONLY and shall not be relied upon by the Buyer for accuracy or completeness. BUYER ACKNOWLEDGES THAT NO REPRESENTATIVE OF RABIN HAS AUTHORITY TO MAKE ANY REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE PURCHASED ITEMS. THE PURCHASED ITEMS SOLD BY RABIN HEREUNDER ARE SOLD AS IS, WHERE IS, AND WITHOUT REPRESENTATION, WARRANTY OR RECOURSE OF ANY KIND OR NATURE. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, ALL IMPLIED OR EXPRESS WARRANTIES ARISING UNDER THE

8 UNIFORM COMMERCIAL CODE OR UNDER ANY OTHER APPLICABLE LAW INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY RABIN AND OWNER IN THEIR ENTIRETY. IN ADDITION, RABIN AND OWNER MAKE NO REPRESENTATIONS OR WARRANTIES AS TO THE TITLE, POSSESSION, QUIET ENJOYMENT, LOCATION OR COMPLETENESS OF THE PURCHASED ITEMS. 17. Default/Non-Compliance. In addition to the matters set forth in Section 1 above, if Buyer fails to pay the Purchase Price for any of the Purchased Items, RABIN may resell such items at a public or private sale without further notice. If, at such a sale, such item(s) is sold for a lesser price; the defaulting Buyer will be responsible to pay for the difference together with all charges, fees and/or expenses, including but not limited to, the cost of removal and resale of the abandoned item(s), commissions, and legal fees incurred by Rabin as a result of resale. 18. Limitation of RABIN's Liability. RABIN shall not be liable to Buyer for any damages, including, without limitation, incidental, consequential, exemplary, treble or special damages or damages for breach of contract, tort (including negligence), strict liability, patent infringement or otherwise arising out of or in any way related to the (i) auction, (ii) Purchased Items or any act or omission of RABIN concerning the Purchased Items, (iii) removal and/or delivery of any Purchased Items from the Real Property, or (iv) dismantling, removal, transport, reassembly, use, operation, maintenance, or repurchase and/or resale of the Purchased Items by any person. 19. Acts of Others. RABIN is not responsible for the acts or omissions of (i) of any party who provided any items to the auctioneer for sale, (ii) owner or lessor of the Real Property, or (iii) any party who provides services to the auctioneer and/or Buyer, including, but not limited to telecommunication, internet bidding services, removal, rigging, or shipping, of Purchased Items. 20. Headings. The section headings in these Sale Terms are inserted for convenience only and are not intended to modify or define any term or provision of these Sale Terms. 21. Governing Law; Jurisdiction. THESE SALE TERMS SHALL BE DETERMINED UNDER, GOVERNED BY, AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE STATE OF CALIFORNIA WITHOUT GIVING EFFECT TO PROVISIONS FOR CHOICE OF LAW THEREUNDER. EACH OF THE PARTIES HERETO AGREES THAT ALL ACTIONS OR PROCEEDINGS ARISING IN CONNECTION WITH THESE SALE TERMS SHALL BE TRIED AND LITIGATED ONLY IN THE STATE COURTS AND, TO THE EXTENT PERMITTED BY APPLICABLE LAW, FEDERAL COURTS LOCATED IN THE SAN FRANCISCO COUNTY, CALIFORNIA. 22. Severability. If any provision of these Sale Terms is deemed illegal, invalid or unenforceable, the legality, validity and enforceability of the remaining parts, shall not be affected. IN WITNESS WHEREOF, the Buyer hereby (i) acknowledges that it has read and fully understands all of the provisions of these Sale Terms, and (ii) agrees to be bound by these Sale Terms.

9 Day 1 - Construction Shop Midwest PVC welder, model CD50, s/n SO , with (4) guns, cart mounted Miller welder, model Millermatic 252, s/n LJ340216R Thermal dynamics plasma cutter, model Cutmaster 82, mounted on mobile tool cabinet Miller welder, model Trailblazer 302, s/n LK200111H, diesel Miller welder, model Bobcat 225, s/n LA297053, diesel Lincoln welder, model Idealarc DC-600, s/n U , with Lincoln LN-8 wire feeder, s/n U Lincoln welder, model Idealarc DC-600, s/n U , with Lincoln LN-8 wire feeder, s/n U Lincoln welder, model Idealarc DC-600, s/n U , with Lincoln LN-8 wire feeder, s/n U Miller welder, model Deltaweld 651, s/n JK Lincoln squirt welder, model LN-8, s/n , wire feeder Miller welder, model CP-302, with Cobramatic wire feed and Miller Coolmate Miller welder, model Millermatic 251, s/n LG190727B Miller welder, model CP-300, s/n JH296324, with Cobramatic wire feed Thermal dynamics plasma cutter, model Thermal Arc PAK 3XR, s/n V81405A18300, mounted on mobile tool cabinet 115 [Lot] (2) Track welders, (1) Victor model VMC200, s/n , (1) Aronson model 108, s/n 7452 with tracks and welding pit 116 [Lot] Harris welding wire, (33) boxes Alloy ER 4043, 1/16", 16 lb., (16) boxes Alloy SIB, 1/16", 30 lb. 117 [Lot] Lincoln welding wire, model Super Arc, (11) boxes, 1/16", L-56, (12) boxes.045", L [Lot] Lincoln welding wire, model Murematic, (45) boxes.035" 119 [Lot] Welding accessories, and supplies, torches, guages, hose, leads, wire, rods (contents on rack with rack and [Lot] Welding rod, contents in cabinet with cabinet Rigid pipe threader, model 535, s/n EBE , electric Rigid pipe threader, model 535, s/n EAM12244E96, electric Oster pipe threader, model 655, s/n ACD-605, electric DeWalt 12" compound saw, model DW DeWalt 14" chop saw, model D28715, s/n DeWalt 14" chop saw, model D28715, s/n DeWalt 14" chop saw, model D28715, s/n Milwaukee 14" chop saw, model , s/n 968F Makita 12" concrete saw, model DPC 7311, s/n , gas powered Stihl 16" concrete saw, model TS800, gas powered Stihl 12" concrete saw, model TS400, gas powered 132 [Lot] Electric hand tools, (1) DeWalt band saw, (1) DeWalt reciprocating saw, (1) Milwaukee sawzall 133 [Lot] Malwaukee electric hand toola, (1) 6" straight grinder, (1) 14" hand-held chop saw (with extra blades) 134 [Lot] (3) Circular saws, (2) Milwaukee 8" metal cutting, (1) DeWalt 7 1/4" 135 [Lot] (3) Circular saws, (2) Milwaukee 7 1/4", (1) Bosch 7 1/4", (1) Black & Decker 8 1/4" 136 [Lot] (4) Skilsaw 8 1/4" circular saws 137 [Lot] (2) Black & Decker 7" angle grinders 138 [Lot] (3) 7" angle grinders, (1) Milwaukee, (1) Black & Decker, (1) Metabo 139 [Lot] (3) Milwaukee 4 1/2" angle grinders 140 [Lot] (3) Makita 4 1/2" angle grinders, with case Page 1

10 RABIN WORLDWIDE and wheels 141 [Lot] (3) Makita 4 1/2" angle grinders, with case and wheels 142 [Lot] Electric hand tools, (2) Makita 4 1/2" angle grinders with case and wheels, (2) Bosch nibblers 143 [Lot] (4) Milwaukee grinders, (2) die, (2) angle 144 [Lot] (3) DeWalt 4 1/2" angle grinders 145 [Lot] (4) DeWalt 4 1/2" angle grinders, (3) 4 1/2", (1) 6" angle 146 [Lot] (4) grinders, (3) 4 1/2", (1) 6" angle 147 [Lot] (5) grinders, (3) 4 1/2", (1) 6" angle, (1) die 148 [Lot] (4) Electric drills 149 [Lot] (4) Electric drills 150 [Lot] (4) Electric drills 151 [Lot] Electric hand tools, (2) jigsaws, (1) orbital sander, (1) drill 152 [Lot] Electric hand tools, (1) belt sander, (2) orbital sanders, (1) router, (1) nibbler Hilti combi hammer, model TE-40-AVR Hilti combi hammer, model TE Hilti combi hammer, model TE-5, with TES-DRS attachment DeWalt rotary hammer, with bits Makita rotary hammer, with bits Hilti drill gun, model DX A41, with X AM 72 attachment Hilti piston drive tool, model DX [Lot] (2) Hilti piston drive tools, model DX [Lot] (3) DeWalt cordless drills, 18V, with batteries, chargers and cases 162 [Lot] (3) DeWalt cordless drills, 18V, with batteries, chargers and cases 163 [Lot] (2) DeWalt cordless angle grinders, with (5) batteries, (3) chargers and bag 164 [Lot] DeWalt cordless hand tools, (1) circular saw, (1) angle grinder, (1) drill, (1) impact wrench with (6) batteries and (2) chargers 165 [Lot] DeWalt cordless hand tools, (1) angle grinder, (1) drill, with (3) batteries and (2) chargers 166 [Lot] DeWalt cordless hand tools, (2) angle grinders, (1) reciprocating saw, with (4) batteries and (3) chargers 167 [Lot] DeWalt cordless hand tools, (4) drills, (1) jig saw, with (4) batteries and (2) chargers 168 [Lot] DeWalt cordless hand tools, (4) drills, (1) impact wrench, with (4) batteries and (3) chargers 169 [Lot] Milwaukee cordless hand tools, (1) drill, (1) impact wrench, with (4) batteries and (3) chargers 170 [Lot] (2) Milwaukee cordless impact wrenches, with (4) batteries and (2) chargers 171 [Lot] Milwaukee cordless hand tools, (3) drills, (1) impact wrench, with (6) batteries and (2) chargers 172 [Lot] Milwaukee cordless hand tools, (2) drills, (2) impact wrenches, with (5) batteries and (2) chargers 173 [Lot] Cordless hand tools, (1) DeWalt angle grinder with(2) batteries and chargers, (1) Milwaukee impact wrench with (2) batteries and chargers 174 [Lot] Cordless hand tools and chargers, (2) Makita angle grinders, (1) Hilti tool, (1) Porter Cable drill and charger, (5) Makita chargers 175 [Lot] Pneumatic tools, (5) impact wrenches, (1) drill, (1) ratchet 176 [Lot] Pneumatic tools, (5) impact wrenches, (1) drill, (1) ratchet 177 [Lot] (6) Pneumatic impact wrenches 178 [Lot] Pneumatic tools, (3) grinders, (2) air hammers, (1) impact wrench, (2) drills, (2) chippers, (1) ratchet 179 [Lot] (3) Hilti pneumatic nail guns 180 [Lot] (3) Pneumatic nail guns, (2) Stantech, (1) Hilti 181 [Lot] (3) Pneumatic nail guns, (2) Porter Cable, (1) Hilti Black & Decker 3/4" magnetic drill press 183 [Lot] (9) Combination wrenches 184 [Lot] (2) Ratchet sets, with (1) incomplete 185 [Lot] Rigid tools, (2) model 700 electric handheld pipe threader, (4) manual Page 2

11 threaders with (22) assorted dies 186 [Lot] (2) Rigid dies, model 141, 2 1/2" - 4" 187 [Lot] (4) Rigid pipe cutters, (3) 2 1/2" - 4", (1) 1/8" - 2" Greenlee conduit bender, model 555, s/n PL31518LFS Greenlee job box, with benders Greenlee portable hydraulic bender, model 884/ [Lot] Greenlee various benders, with mobile tool cabinet Norton concrete saw, model C1320, s/n [Lot] (2) Drill presses, (1) Cincinnati, (1) Buffalo 194 [Lot] (2) Dual grinders, (1) Baldor, (1) US Electrical tool Buffalo drill press, heavy dity, with bits Jib boom, with Harrington 1-ton electric hoist 197 [Lot] (2) CM 2-ton bridge hoists, (NO BEAM) 198 [Lot] Chain hoists, etc, with plate clamps, pallet pullers, fittings(contents in metal cabinet with cabinet) 199 [Lot] Rigging cables and chains, hanging on wall 200 [Lot] Nuts and bolts, contents in wood cabinet 201 [Lot] (3) Metal cabinets, with contents (shovels, come alongs, lights) 202 [Lot] (2) Metal cabinets, with contents (rigging, cutters, hammer wrench, hooks) 203 [Lot] 1/2-ton Electric hoist 204 [Lot] (1) 2-door metal cabinet, (3) shelf units, (1) 10-drawer file with contents, (fittings, lube, hooks, nuts, bolts) Oster pipe threader, with dies (hanging on A frame) DoAll horizontal metal bandsaw, model C916A, s/n S , 6' DoAll vertical metal bandsaw, model TF-14H, s/n Horizontal bandsaw, 4' 208A [Lot] (18) Morse bandsaw blades, 14', 4" x 1" Fluke power logger, model [Lot] Thermometers, (4) Fluke precision infrared, (2) Fluke digital, (1) Atkins, (1) Tegam, (1) TE digital 211 [Lot] Electrical test equipment, (1) Megger, (1) Amec ohmmeter (1) Fluke multimeter, (1) Micro Mitt, (1) DPL multi/xlp Alnor velometer 213 [Lot] Electrical test equipment, (1) Tektornix oscilloscope, (1) Fluke hydra, (1) Diamond AccuPro, (1) Graphtec logger, (1) Eagle eye 214 [Lot] Precision equipment, (3) dial gauges, (1) laser, (2) tachometers, (1) fixturlaser, (2) Rosemont Tracat 215 [Lot] Miscellaneous electric thermometers, multimeter, nanometer, pressure tester, chart recorder 216 [Lot] High voltage tools and gear, (2) cutters, (1) tool kit, (1) Hypress, outerwear, gloves, protective suit, helmet, visors Enerpac cordless hydraulic unit, with Milwaukee sawzall Power Team hydraulic jack, with hydraulic unit 219 [Lot] Tap and die sets, with drill bits, reamers, collets (contents on tabletop) 220 [Lot] (3) Hydraulic jacks, with pump 221 [Lot] (3) Hydraulic jacks, with pump 222 [Lot] (9) Hydraulic jacks, & (1) clamp 223 [Lot] Pullers, various size (contents in Knaack box with box) 224 [Lot] Miscellaneous hand tools, ratchets, pliers, screwdrivers 225 [Lot] Miscellaneous wrenches, open end, allen, ratchet 226 [Lot] (18) Hammer wrenches 227 [Lot] (18) Combination wrenches 228 [Lot] (4) Rigid pipe wrenches, 36", 24", 18", 14" 229 [Lot] (4) Rigid aluminum pipe wrenches, 36", (2) 24", 18" 230 [Lot] (8) Pipe wrenches 231 [Lot] "C" clamps Page 3

12 RABIN WORLDWIDE 232 [Lot] (5) Pneumatic impact wrenches 233 [Lot] Pneumatic tools, (3) grinders, (6) chisels 234 [Lot] (8) Pneumatic chisels 235 [Lot] (5) Come alongs, (1) chain hoist 236 [Lot] (3) Bearing heaters, with fittings kit 237 [Lot] (2) Bearing heaters 238 [Lot] (4) 4 1/2" Angle grinders, (2) Makita with case, (2) DeWalt 239 [Lot] (2) Milwaukee 7/9" angle grinders 240 [Lot] (2) Portable bandsaws, (1) Black & Decker, (1) Rockwell 241 [Lot] Electric hand tools, (2) drills, (2) impact wrenches, (1) impact hammer 242 [Lot] Electric hand tools, (1) jigsaw, (1) sander, (1) riveter, (2) Dremel tools 243 [Lot] (2) DeWalt cordless drills, with (3) batteries, (2) chargers General electric drain snake, model Mini Rooter 245 [Lot] Drain cleaners, (1) Rigid K38 electric drain snake, (1) Kinetic water ram Rigid electric drain snake, model K Quincy air compressor, model G15H17PC3B, s/n , gas powered, 5.5. HP, MWP 150, cfm 11.4@40 psi, 100 psi, 125 psi, mounted on trailer Honda generator, model EG5000X, s/n EZ , 120/240 V Dayton semi trash pump, model 4VV64, s/n , gas powered, 2" x 2" Troy-Bilt pressure washer, gas powered Trimble laser transit, model LL100, s/n 0622, with tripod and case Laser Alignment laser transit, model , with tripod and case 253 [Lot] Miscellaneous hand tools, (2) gas powered chop saws, (1) grinder, (1) HD drill, (1) impact hammer, (1) timing light, (1) holesaw kit, compression guages, batteries, chargers Delta belt/disc sander, model , s/n 90L Miller welder, model SRH444, s/n JB [Lot] (2) Lincoln welders, (1) Idealarc TM-500/500, (1) Idealarc TM-400/ Jib boom, with CM electric chain hoist CM electric chain hoist 259 [Lot] (6) 2-door metal storage cabinets, with contents and frame (sprinkler parts) 260 [Lot] (6) 2-door metal storage cabinets, with contents and frame (sandblasting pots, welding rods, welding supplies) 261 [Lot] (6) 2-door metal storage cabinets, with contents and frame (welding supplies, miscellaneous) 262 [Lot] (6) 2-door metal storage cabinets, with contents (rigging, clamps, gloves, miscellaneous) 263 [Lot] (8) 2-door metal storage cabinets, with contents, 4 with frame (welding supplies, gloves, miscellaneous) Welding table, with vise, 8' x 4' x 3' Welding table, with vise, 8' x 4' x 30" Welding table, with vise, 7 1/2' x 5' x 3' 267 [Lot] (2) Welding stands, 4' x 4' x 2' Welding table, with vise, 10' x 5' x 3' 269 [Lot] metal shelving, heavy duty, 3-sections, with contents (various fittings) Lyon 11-drawer parts cabinet, with contents (nuts, bolts, washers, cotter keys, plumbing) Lyon 10-drawer parts cabinet, with contents (plumbing, fittings) 271A 1 Eagle flammable storage cabinet, model 1947, 44 gal. cap Desa portable heater, model Master-B600D, s/n [Lot] Tie downs, chain, clamps, (contents on pallet) 274 [Lot] (2) Welding tables, 10' x 5' x 3' (welded together) Welding table, with vise, 8' x 4' x 3' Welding table, 10' x 5' x 3' Page 4

13 277 [Lot] (5) Pedestal shop fans 278 [Lot] (1) HD vise (stand mounted), (1) portable heater and air hose on wall 279 [Lot] Scissor lift platform, 4 1/2' x 2' Proceed to Fabrication Building Bridgeport milling machine, s/n , 42" x 9" bed, 2 HP with Newall DRO LeBlond lathe, model Regal, 8 1/2" x 22" B.C. with Jacobs spindle nose chuck, (3) assorted chucks, compound slide table, tool post and tail stock Mighty Turn lathe, 11 1/2" x 90" B.C. with compound slide table, tool post, 3-jaw chuck, (3) center rest, tail stock and Acu-Rite 2-axis Dro LeBlond lathe, model Regal, 14" x 100" B.C. with compound slide table, tool post, 4-jaw chuck and tail stock LeBlond lathe, model Regal, 11" x 80" B.C. with compound slide table, Aloris tool post, 4-jaw chuck, center rest and tail stock 285 [Lot] Chucks and center rest, (6) assorted chucks, (3) center rests Carlton radial arm drill, 5' arm, 13" column with machinist vise, L-shaped base, power arm, spindle speed cap Oliver drill pointer, model 510, s/n F4984V, 10" grinding wheel Greenard arbor press, model 3E, mounted on cabinet Morrison key seater, s/n K70234C, 1" 290 [Lot] (3) Dual grinders, (2) pedestal, (1) bench top Morey vertical shaper, model 77351, s/n M VS, with 24" rotary table, 24" x 52" bed Rockwell drill press, model , 20", variable speed, 1/2 HP, 3 ph Steptoe shaper, model Big 4, feed index plate 7" cap. with 12" vise Rockford hydraulic shaper, s/n 106UH60, with tooling and parts in 3 cabinets with cabinets South Bend lathe, s/n 1812, 7" x 3" B.C., compound slide table, tool post, 3-jaw chuck and tail stock Cincinnati milling machine, 80" x 16" table and vise with tooling, parts and accessories in 3 cabinets with cabinets Brown & Sharpe surface grinder, model No 2, with tooling and grinding wheels in cabinet with cabinet Klingelhofer cold saw, model SLT, s/n Cold saw 299A [Lot] (13) Cold saw blades, 24" with spacers (contents in rack) Buffalo drill press, model No Kalamazoo belt/disc sander, model S612V, s/n Cincinnati super spacer Rotary table, 16" Bridgeport rotary table, 12" Kurt milling machine vise, 6" with swivel base 306 [Lot] (2) Milling machine vises, 6" with swivel base Palmgren multi-angle milling machine vise, 4" 308 [Lot] Assorted carbide inserts 309 [Lot] Assorted high speed drill bits 310 [Lot] Assorted boring bars, & tool holders 311 [Lot] Helicoil thread repair kits Milling machine vise, heavy duty, 14" Milling machine vise, heavy duty, 8 1/2" with swivel base 314 [Lot] Assorted centers 315 [Lot] (4) Jacobs assorted chucks 316 [Lot] R8 Collets and accessories Dumore tool post grinder, 15,500 RPM, 1/2 HP 318 [Lot] Versa tapper, & (2) boring heads 319 [Lot] Tool post, & (11) holders 320 [Lot] Assorted tooling, (1) 6" vise, (1) Page 5

14 RABIN WORLDWIDE vibrometer, tool holders Southworth scissor table, 16" x 24", hydraulic with 30" turntable 322 [Lot] Various tap and die sets 323 [Lot] Keyway broaches 324 [Lot] Assorted hi-speed drills, contents in 2-door metal cabinet with cabinet 325 [Lot] Assorted tooling, reamers, taps and centers, contents in 2-door metal cabinet with cabinet 326 [Lot] (2) 2-door Metal cabinets, with contents (assorted tooling) 327 [Lot] (7) 2-door Metal cabinets 328 [Lot] Assorted retractable hose reels Abell Howe bridge crane, approx. 80' long, 24' wide with Yale 1-ton electric hoist, pendant controls, 1-ton cap Abell Howe dual bridge crane, approx. 140' long, 24' wide with (1) Shaw Boy lift tech, (1)Yale electric hoist, pendant controls, 1-ton cap CM electric hoist, model Loadstar, 1-ton cap. with 1/2 ton beam Rodgers hydraulic press, 15' long, 5' wide Modern Equipment pot pourer Landis threading machine Esco hydraulic press, 500 ton cap Chop saw, with feed trough 337 [Lot] Cable fittings, parts, misc., contents in (2) 2-door metal storage cabinets, (1) work station, (1) index file with cabinets, bench and file 338 [Lot] Cable rack with contents, various spools cable with Olympic 1700 cable measurer 339 [Lot] (3) Rearing heaters 340 [Lot] Pneumatic hand tools, (8) grinders, (8) chisels, (4) impact wrenches, (1) hydraulic pack with jack 341 [Lot] (8) Come alongs 342 [Lot] Pullers 343 [Lot] Shop equpment, (1) Buffalo bench top drill press, (1) Baldor dual grinder, (1) Columbian vise 344 [Lot] (12) 2-door Metal storage cabinets, with contents (fittings, parts, gears, miscellaneous) 345 [Lot] Cabinet and bench, with contents (fittings, crane parts, including gears under welding tables) 345A [Lot] (2) Welding tables, (1) 8' x 4' x 34" with vise, (1) 10' x 5' x 35" 346 [Lot] Contents in office area, storage cabinets, shelf units, files, desks, chairs with contents (parts, fittings, miscellaneous) Scissor table, 4' x 2', hydraulic Scissor table, 4' x 2', hydraulic 348A 1 SMP diesel fuel tank, 300 gal. cap., single wall, horizontal with Tuthill Fill-Rite pump, nozzle and containment box DoAll horizontal metal bandsaw, model C-305-A, s/n , with 20' feed conveyor Oster threading machine, model 792A, s/n ABX Lincoln welder, model Idealarc DC-400, s/n AC667894, with LN-7 wire feeder Lincoln welder, model Idealarc DC-400, s/n AC646341, with LN-7 wire feeder Miller welder, model Deltaweld 65, s/n JK645788, with S60 24V constant speed wire feeder Miller welder, model Deltaweld 65, s/n JK645787, with S60 24V constant speed wire feeder Lincoln welder, model Idealarc TM-650/ Airco cutter, model No 12 Cumugraph, with 12' feed table and 2-door metal storage cabinet 357 [Lot] (2) Track welders, with 11' x 7' table and tracks 358 [Lot] Welding torches and hose 359 [Lot] Welding masks, leads, hammers 360 [Lot] (8) Hydraulic pumps, with jacks or clamps 361 [Lot] (9) Hydraulic pumps, (1) electric (some with jacks and 1 clamp) Ingersol Rand reciprocating air compressor, model C/2475, s/n , Page 6

15 mounted on vertical receiving tank Dual bench grinder 364 [Lot] (2) Welding tables, (1) 10' x 5' x 35", (1) 9 1/2' x 5' x 3' (spot welded together) Swage block 366 [Lot] (3) Anvils 367 [Lot] Blacksmith tools, hammers, tongs, scoring tools, (contents on table and in cabinet) Nazel press, with tooling (in cabinet, on rack and table) Chambersburg press Hydraulic press, with cabinet and table with contents Buffalo Forge roll press, s/n Dip tank Kiln Cress electric furnace, model C122012TC, s/n Dual pedestal grinder, heavy duty Bliss 250-ton press, model HP50013, s/n H62268, with cabinet and roller ball feed table Hydraulic clamp 377A [Lot] Assorted dies, (contents of H.D. shelf unit with shelf unit) Donaldson Torit portable dust collector, model Porta-Trunk, s/n 1G [Lot] (2) Portable heaters 380 [Lot] (2) Welding carts 381 [Lot] (4) Stock dollies 382 [Lot] (36) Storage cabinets, with contents, including pallet of lights and crowbars Muhr and Bender iron worker, model KBL, size KBL 2 1/2, 5000 lb. tensil strength, mild steel cap with dies in cabinet with cabinet and 15' scissor lift feed conveyor 384 [Lot] ESAB cutting system, model Silhouette 1000, including 3 cutting torches, Burny 2.5 RS controls, 13' x 7' x 3' track table, 10' x 5' x 2' cutting pit DoAll horizontal metal bandsaw, model C-305-A, s/n , 5', with model C305A controls Ohler Remschied circular metal saw, model KA 630, s/n 7876, 24", heavy duty, with power roller feed and parts in metal cabinets with cabinets Miller welder, model Deltaweld 302, s/n MC010367U, with Cobramatic Pro Series MIG push/pull wire feeder and Miller Coolmate Lincoln welder, model Idealarc Welding table, 8' x 4' x 3' with vise, clamps, rods and firepit Dual pedestal grinder, heavy duty Bertsch & Co power shear, s/n 8806, 10' Scissor lift table, manual, 8' x 4', mobile Bishamon scissor platform lift, 4' x 2' Verson mechanical press brake, model B-710, s/n 13218, 12' 394A [Lot] Press brake parts, blades, fingers National finger brake, 10' Lockformer roll former, s/n Wysong bending roll, 6' Niagra bending roll, model 949, s/n 51050, 3' Pexto power shear, model 12-U-4-F, s/n 58412, 4' DoAll vertical metal band saw, with spot welder Miller welder, model CP-302, s/n KK149568, with Cobramatic push/pull GMAW wire feeder Lincoln welder, model DC-600, s/n U , with model LN wire feeder Miller welder, model Millermatic Arc Master welder, model 300ACDC 404A 1 Arcair cooler Keen Ovens rod heater 406 [Lot] Welding supplies, & accessories, rod, wire, tips, hose (contents in cabinet, no welders or coolers) Miller welder, model CP-302, s/n Page 7

16 RABIN WORLDWIDE KK071488, with Cobramatic push/pull GMAW wire feeder Lincoln welder, model Idealarc TM-400/400, s/n AC Track welder 410 [Lot] Welding table, roll stands, & cabinets, (1) welding table with pipe vise, 10' x 4' x 34", (4) stands, (2) 2-door cabinets 411 [Lot] Welding table and stand, (1) welding table with vise, 10' x 4' x 34", (1) stand, with (3) Whitney punches, 48" x 32" x 34" Rockwell/Delta drill press, model , s/n Black & Decker dual pedestal grinder, 10" Pexto roll bender, 3' Pexto shear/brake, model 055D, s/n 164, 3', manual with stand Ruoff notcher 417 [Lot] (2) Tables, (1) wood top, metal base, 10' x 5' x 34" with Pexto notcher and Lockformer edger, (1) Pexto swage table, 36" x 30" x 34" with shear 418 [Lot] Assorted clamps, (contents on table top) 419 [Lot] (11) 2-door metal storage cabinets, with contents (fittings, tooling, cleaners, gloves, helmets, bits, cable, miscellaneous) 420 [Lot] (2) Retractable hose reels Abell Howe bridge crane, approx. 120' long, 30' wide with Shaw box 1-ton electric hoist Coffing 1/2 ton electric hoist, with jib boom 423 [Lot] (5) Eriez magnets, (1) electric, (4) manual 424 [Lot] Sheet metal, plate metal, contents of 3 metal racks, on pallets and stacked 425 [Lot] Fans and welding screens Bridge crane, approx. 340' long, 30' wide, 10-ton cap. 427 [Lot] Air and hydraulic shop parts, pumps, fittings, hose (contents of parts in room with shelf units and (2) 2-door metal storage cabinets 428 [Lot] Shop furnishings, (2) work benches with vises, (1) bench grinder, (1) stainless-top table, (1) wood-top work bench, (1) welding table, 60" x 44" x 34" (outside room) 429 [Lot] Hydraulic snake hose, with (2) lifting bars 430 [Lot] (3) Super cell columns Dake hydraulic press, model 5-150A, s/n , with dies and safety cage 432 [Lot] Drill press and grinder, (1) Clausing model 2242 bench top drill press, s/n , (1) Baldor dual bench grinders 433 [Lot] (2) Machinist's vises 434 [Lot] Sledge hammers 435 [Lot] Ratchet wrenches and sockets 436 [Lot] Pipe threading equipment, (1) manual threaded, (12) dies, (1) pipe cutter, (1) reamer and die blades 437 [Lot] Atlas Pipemate drain snake 438 [Lot] Banding tools, (5) strapping tools, (2) cutters, (4) crimpers 439 [Lot] (3) Milton Roy microprocessor dosing pumps, (2) model B , (1) model C721-75HV 440 [Lot] Wire strippers and allen wrenches 441 [Lot] Safety harnesses 442 [Lot] Copper coils 443 [Lot] Come along and chain hoist 444 [Lot] (1) Tripod, (3) pipe chain wrenches, (4) conduit/pipe benders Welding table, with (2) clamp vises, (1) pipe vise, 13' x 4' x 3' SPX hydraulic hose crimper Band-It pneumatic clamping tool, model S [Lot] (2) Hose racks, with contents, 4 partial spools rubber hose Cental Pneumatic 20 gallon sand blaster, model S Section pallet racking, with contents (assorted parts, shafts, miscellaneous), (2) 9' x 3' uprights, (10) 106" crossbeams 451 [Lot] Pallet racking, 6-sections, with contents (nuts, bolts, fittings, brass, gears, valves, Page 8

17 miscellaneous) 452 [Lot] Welding torches, guages, parts, contents in cabinet with cabinet 453 [Lot] Work table, shelf unit and storage cabinet, with contents (not tagged) metal, copper, shafts, bolts 454 [Lot] Rigging, cable slings, chains (contents on rack and by entrance) 455 [Lot] (6) 2-door metal storage cabinets, with contents (fittings, tools, valves, copper, welding rod, guages) 456 [Lot] (6) 2-door metal storage cabinets, with contents (plumbing, pumps, fittings, harnesses, lubricant) ARO pneumatic chain hoist, with jib boom, 1/2 ton cap. 458 [Lot] Hand tools, grinders, wrenches, saws, jacks, sledge hammers, levels, clamps, flashlights, miscellaneous (contents (1) cart, (1) table, (2) shelves, (1) wood cabinet with cabinet, table, shelves and cart 459 [Lot] Ratchets and sockets, (contents on cart with cart) 460 [Lot] (4) Hand trucks, with (1) cylinder truck 461 [Lot] (4) Fiberglass ladders, 8', 6', 4', 3' 462 [Lot] (2) Banding carts, with tools 463 [Lot] (2) Hydraulic lube pumps Shorty pallet jack 465 [Lot] (2) 2-door metal storage cabinets, with contents (janitorial, paint) Hydraulic platform lift, 3' x 2', mobile Wynch platform lift, 42" x 24", mobile Ore test cart 469 [Lot] Carts, (1) aluminum, 2-tier, (1) dock 470 [Lot] Cable and chain slings 471 [Lot] metal shelf unit, heavy duty, with contents 472 [Lot] Hand tools, sledge hammers, ratchet, pipe wrench, come along, mallets, conduit bender (contents on 2 metal worktables with tables) 473 [Lot] Pullers, hydraulic pump, bottle jacks, 474 [Lot] (3) Shop vacuums (contents on welding stand with stand) 475 [Lot] Cable slings, contents in metal bin with bin 476 [Lot] (2) Torpedo heaters 477 [Lot] Pumps, (1) gas powered trash pump, 2" x 2 1/2", (1) sump pump 477A 1 Battery powered spray tank 478 [Lot] Drill press and grinder, (1) Rockwell Delta drill press, (1) Baldor dual bench grinder 479 [Lot] (2) Wood work tables, 16' x 3' x 3' with contents below (NO GRINDER) 480 [Lot] Pallet racking, with contents (motor coils and housings), (2) 10' x 3' uprights, (12) 106" crossbeams 481 [Lot] (7) 2-door metal storage cabinets, with contents (where applicable) 482 [Lot] (13) 2-door metal storage cabinets, with contents (where applicable) Bridge crane, approx. 120' long, 24' wide, with CM Meteor electric hoist, 2-ton cap Econ O Line abrasive glove box, model RA40X40, s/n E [Lot] Miscellaneous, (1) torpedo welder, (1) battery charger, (1) test cabinet, (3) batteries on cart McBroom Electric puller and press, model P, s/n 195, with Enerpac hydraulic pump 487 [Lot] Retractable hose reel, with Eriez magnet and cart 488 [Lot] Motors and motor parts, contents on 2 pallet racks and cabinet, with racks and cabinet Despatch double door dyring oven DeVilbiss paint spray booth, 9' x 6' x 7' 491 [Lot] Wire, cable, conduit, contents on racks, pallets and box 492 [Lot] Interpole coils, (contents on (4) 493 [Lot] Crane parts, housings, wheels, pads, springs (contents on [Lot] Drill press, grinder and punch, (1) Buffalo drill press, (1) dual pedestal grinder, (1) punch Page 9