Corning Brand Equipment Product Selection Guide

Transcription

1 Corning Brand Equipment Product Selection Guide

2 Introduction Corning Life Sciences is pleased to present our Equipment Selection Guide. In this guide, you will find a selection of Corning s newest and most requested products. For up-to-date information on Corning Life Sciences comprehensive range of products and services, go to where you can access: w New products information w Product catalog w Technical information including: - Application notes - Instruction manuals - Product bulletins - Product selection guides w Product literature

3 Equipment Liquid Handling Equipment...2 Corning Lambda Plus Starter Kit...2 Corning Lambda Plus Single-channel, 8-channel and 2-channel Pipettors...2 Accessories for Corning Lambda Plus Pipettors...2 Costar 8-Pette and 2-Pette Multi-channel Pipettors...2 Corning Stripettor Ultra Pipet Controller and Accessories...3 Corning Aspirator Device and Accessories...3 Transtar -96 Liquid Transfer System...3 Costar Reagent Reservoirs...3 Centrifugation Equipment...4 Corning LSE Mini Microcentrifuge Corning LSE High Speed Microcentrifuge and Accessories...4 Corning LSE Compact Centrifuge, Rotors, and Adapters...5 Agitation Equipment...6 Corning LSE Vortex Mixer and Accessories...6 Corning LSE Digital Microplate Shaker...6 Corning LSE Low Speed Orbital Shaker...7 Corning LSE Orbital Shaker and Accessories...7 Constant Temperature Equipment...8 Corning LSE Benchtop Shaking Incubator...8 Corning LSE 49L Shaking Incubator...8 Corning LSE 7L Shaking Incubator...9 Corning LSE 6 Liter Digital Water Bath... 0 Corning LSE Digital Dry Bath Heater and Accessories... 0 Corning Digital Hot Plates, Stirrers, and Stirring Hot Plates... Corning Analog Hot Plates, Stirring Hot Plate, and Stirrers...2 Stir Bars and Stir Bar Retriever Temperature Controller and Accessories...5

4 Liquid Handling Equipment Corning Lambda Plus Starter Kit The Corning Lambda Plus starter kit contains: w Cat. No Lambda Plus single-channel pipettor, 0.5 to 0 µl w Cat. No Lambda Plus single-channel pipettor, 2 to 20 µl w Cat. No Lambda Plus single-channel pipettor, 20 to 200 µl w Cat. No Lambda Plus single-channel pipettor, 00 to 000 µl w Universal carousel rack for six single-channel pipettors w Corning DeckWorks Pipet Tips: Cat. No (0 µl), Cat. No (200 ml), and Cat. No (,000 µl) VWR Cat. No. Description Qty/Pk Qty/Cs Lambda Plus starter kit kit kit Corning Lambda Plus Single-channel, 8-channel, and 2-channel Pipettors Corning Lambda Plus pipettors are available in single-, eight-, and twelve-channel configurations. w Extremely Low pipetting forces w Volume lock prevents accidental change w 3-year warranty w Fully autoclavable and UV resistant w Designed for universal fit with all common brands of pipet tips w Adjustable tip ejector w Factory calibrated to strict ISO 8655 standards Corning Lambda Plus singlechannel pipettor Corning Lambda Plus 8-channel and 2-channel pipettor VWR Cat. No. Volume Range (µl) Channels Accuracy (%) Precision (%) Tip (µl) Qty/Cs ±2 to ±.5 <6.0 to < ±4.0 to ±0.5 <4.0 to < ±4.0 to ±0.8 <3.0 to < ±.6 to ±0.8 <0.8 to < ±.2 to ±0.6 <0.6 to < ,000 ±.0 to ±0.6 <0.45 to <0.25, ±8.0 to ±2.0 <6.0 to < ±4.0 to ±.6 <2.5 to < ±3.0 to ±.0 <.5 to < ±.6 to ±.0 <.5 to < / ±8.0 to ±2.0 <6.0 to < ±4.0 to ±.6 <2.5 to < ±3.0 to ±.0 <.5 to < ±.6 to ±.0 <.5 to < /300 Accessories VWR Cat. No. Description Universal carousel rack for six single-channel pipettors Universal linear rack for six pipettors (six single-channel, maximum of four 8-channel or 2-channel pipettors) channel or 2-channel pipettor stand. Holds one Lambda Plus 8-channel or 2-channel pipettor Costar 8-Pette and 2-Pette Multi-channel Pipettors These multi-channel pipettors feature a unique, ergonomic trigger-style aspiration and dispense control mechanism designed to reduce thumb fatigue during repetitive pipetting. VWR Cat. No. Volume Range (µl) Channels Qty/Pk Qty/Cs

5 Corning Stripettor Ultra Pipet Controller The Stripettor Ultra pipet controller is designed for use with glass and plastic serological pipets from 0.5 to 00 ml. When fully charged, the batteries enable up to 8 hours of continuous use. Aspirating and dispensing speed is controlled through the finger triggers. w LCD display for continuous visualization of speed, modes, and battery status w Colored nose pieces for user or application identification VWR Cat. No. Description Corning Stripettor Ultra Pipet Controller Accessories Hydrophobic PTFE filter 0.2 µm (5 pcs) Hydrophobic PTFE filter 0.45 µm (5 pcs) Silicone pipet holder Battery set, 3 x AAA, NiHM Battery cover with wings Universal power supply, 9V with set of adaptors (EU, US, UK, and AUS) Colord nose pieces, set of 4 (orange, yellow, green, red) Corning Aspirator Device and Accessories VWR Cat. No. Description Qty/Pk Qty/Cs Aspirator device (includes hand piece, grommet for accessory attachment, and single-channel adapter for use with disposable pipet tips) channel adapter for use with disposable pipet tips Aspirating pipet, without graduations, unplugged, sterile, paper/plastic wrapped Transtar-96 Liquid Transfer System w A portable, autoclavable liquid handling device for use with 96-well plates w A sterile 96 tip disposable cartridge, which loads into the Transtar system, enables liquids to be aspirated, transferred, and dispensed over a volume range of 25 to 200 µl in 5 µl increments w Transtar-96 system accuracy is rated at ±5% at all volume levels VWR Cat. No. Description Sterile Qty/Pk Qty/Cs Transtar-96, adjustable-volume pipettor N/A Transtar elevator N/A Transtar disposable cartridges Yes Transtar disposable reservoir liner, open Yes Transtar disposable reservoir liner, 2-channel Yes Transtar disposable reservoir liner, 8-channel Yes 00 Costar Reagent Reservoirs The reagent resevoirs are manufactured from modified polystyrene, are sterile, and disposable. VWR Cat. No. Volume (ml) Color Qty/Pk Qty/Cs White White White White 00 3

6 Centrifugation Equipment Corning LSE Mini Microcentrifuge The Corning LSE mini microcentrifuge is a personal benchtop instrument designed for quick spin downs of micro-samples. Operation is simple and convenient. After loading sample tubes, close the lid and the rotor accelerates quickly to 6,000 rpm (2,000 x g). This speed range is ideal for bringing small droplets to the bottom of the tubes, micro-filtrations, or basic separations. Press the lid release button and rotor comes to a stop. The LSE mini microcentrifuge includes an 8-place rotor that will accept standard.5 ml to 2.0 ml microcentrifuge tubes, and adapters are included for 0.5/0.4 ml and 0.2 ml tubes. Also included is a 4-place rotor for PCR strip tubes. w Compact, lightweight, and easy-to-use w Close the lid to start, press the lid release button to stop. w 8 x.5/2.0 ml rotor and 4-place strip tube rotors included w Fixed speed of 6,000 rpm generates 2,000 x g. VWR Cat. No. Description Voltage Plug Type Qty/Cs LSE mini microcentrifuge 20V, 50/60Hz US Corning LSE High Speed Microcentrifuge The Corning LSE high speed microcentrifuge features an easy-to-use, digital control interface, and high-speed performance for quick nucleic acid and protein separations. Two control knobs are used to precisely set rotor speed and run time, and parameters are shown on the easy-to-read LED displays. Press the Speed/G-force knob to toggle the display between rpm and calculated g-force. The LSE high speed microcentrifuge incorporates a brushless drive and unique air cooling system to both reduce noise and minimize sample heating even during prolonged runs at maximum speed. w Fast acceleration to a maximum speed 3,300 rpm/6,300 x g w Complete with easy access, 24 x.5/2.0 ml rotor w Precise, digital control system w Set and view rotor speed in rpm or g-force w Quiet and cool running, even at maximum speed VWR Plug Dimensions Cat. No. Description Voltage Type Speed (rpm) Weight (H x W x D) Qty/Cs LSE high speed 20V, US 500-3,300 8 lbs x.5 x 8.5 in. microcentrifuge 50/60Hz (8. kg) (23.5 x 29.3 x 2.6 cm) Accessories VWR Cat. No. Description Qty/Pk Individual adaptors for 0.5/0.4 ml tubes Individual adaptors for 0.2 ml tubes 6 4

7 Corning LSE Compact Centrifuge The Corning LSE compact centrifuge is a space saving centrifuge ideal for use in life science and industrial research labs. Four angle rotors are available for this centrifuge, including an innovative combination rotor designed by Corning to allow for greater versatility. This multi-purpose rotor can accommodate various tube sizes including a 5 ml microcentrifuge tube, as well as round and conical bottom 5 ml and 50 ml centrifuge tubes. Tubes are inserted at an increased fixed angle to allow for improved efficiency of cellular pelleting. An equal g-force is applied to the samples when spinning 5 ml and 50 ml tubes simultaneously. In addition, the LSE compact centrifuge can accommodate a swing-out rotor for 6 x 5 ml. The centrifuge s control panel features a large digital display and a convenient turn knob for setting parameter values. An internal microprocessor maintains precise control over operation with ten levels of acceleration and deceleration and a speed range from 200 rpm to 6,000 rpm. For safety considerations, the centrifuge is equipped with an electronic lid lock system, over speed protection, and an automatic shut off imbalance detection system. w Maximum capacity: 6 x 50 ml w Maximum speed: 6,000 rpm/4,85 x g w Accepts both conical and round bottom tubes w Space saving footprint: " x 4.6" x 0" VWR Plug Speed Weight Dimensions Cat. No. Description Voltage Type (rpm) (kg) (L x W x D) Qty/Cs LSE compact centrifuge 20V, US 200-6, lbs. x 4.6 x 0.2 in. 50/60Hz (5 kg) (28 x 37 x 26 cm) Rotors VWR Cat. No. Description Max. Speed (rpm) Max. RCF Qty/Cs LSE 6 x 50 ml fixed angle rotor 6,000 3, LSE 2 x 5 ml fixed angle rotor 6,000 4, LSE 6 x 5 ml swing-out rotor 3,500, LSE 8 x.5 ml fixed angle rotor 6,000 2, LSE combination rotor for 5, 5, and 50 ml tubes 6,000 3,820 Adapters VWR Cat. No. Description Qty/Cs LSE adapters for 0 and 5 ml tubes in 50 ml rotor LSE adapters for 5 and 7 ml tubes in 50 ml rotor LSE adapters for 5, 7, and 0 ml tubes in 5 ml rotor 6 6 x 50 ml fixed angle rotor (VWR Cat. No ) 2 x 5 ml fixed angle rotor (VWR Cat. No ) 6 x 5 ml swing-out rotor (VWR Cat. No ) 8 x.5 ml fixed angle rotor (VWR Cat. No ) Combination rotor (VWR Cat. No ) 5

8 Agitation Equipment Corning LSE Vortex Mixer The Corning LSE variable speed vortex mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, and continuous or touch mix modes. A range of accessories are available for all common sample tubes and containers. w Variable speed for gentle to vigorous mixing w Optimized counter balance for minimal vibration w Lightweight and portable w Includes cup head for all standard microtubes and centrifuge tubes w Mix a variety of tubes and plates with optional accessory heads w Touch and continuous mix modes VWR Plug Speed Dimensions Cat. No. Description Voltage Type (rpm) Weight (L x W x D) Qty/Cs LSE vortex mixer 20V, 50/60Hz US 0-3, lbs. 5.5 x 6.3 x 5. in. (2.2 kg) (4 x 6 x 3 cm) Accessories Accessory heads for Corning LSE vortex mixer VWR Cat. No. Description Qty/Cs Optional head, 3 inch, for processing larger numbers of tubes Optional head for 24 x.5/2.0 ml tubes, 24 x 0.5 ml tubes, and 32 x 0.2 ml tubes (or 4 tube strips) Optional head for microplate, or 64 x 0.2 ml tubes, or 8 x 0.2 ml tube strips Optional head for 8 x 5 ml and 8 x 2/3 mm diameter tubes Optional head attachment for 6 x 50 ml tubes Optional head for 2 x.5/2.0 ml tubes, held horizontally Optional head for 4 x 5 ml tubes, held horizontally Optional head for 2 x 50 ml tubes, held horizontally Corning LSE Digital Microplate Shaker The Corning LSE digital microplate shaker features digital control of shaking speed and run time. A single control knob is used to set parameters, and values are shown on a large 3-digit display. A sturdy base encloses the motor for quiet, vibration-free operation. The included stainless steel platform accommodates up to 4 microplates (standard or deep well), and the shaker is safe for use in temperature controlled environments from 4 C to 65 C. w Large capacity process up to 4 microplates w 3 mm orbit for resuspending, homogenizing, or vortexing w Large digital display with single-knob control of speed time w Suitable for cold room or incubator use VWR Plug Speed Dimensions Cat. No. Description Voltage Type (rpm) Weight (L x W x D) Qty/Cs LSE digital 20V, US 00 -, lbs. 6.6 x 0.98 x 6 in. microplate shaker 50/60Hz (4.3 kg) (6.8 x 27.9 x 5.3 cm) 6

9 Corning LSE Low Speed Orbital Shaker The Corning LSE low speed orbital shaker includes a 30 x 30 cm platform and is ideal for staining and destaining gels, washing blots and general mixing applications. Speed can be set from 3 to 60 rpm and the timer can be set for up to 2 hours or for continuous operation. w Ideal for staining and washing of fragile gels w Gentle motion prevents foaming of liquids w Simple analog control with easy-turn knobs w 9 mm orbit for blotting, gel staining, and general mixing w Safe for cold room and incubator use Plug Speed Dimensions VWR Cat. No. Description Voltage Type (rpm) Weight (L x W x D) Qty/Cs LSE low speed 20V, US 3-60 lbs. 0 x 2.6 x 6.3 in. orbital shaker 50/60Hz (5 kg) (25.5 x 32 x 6 cm) Corning LSE Orbital Shaker The Corning LSE orbital shaker meets a variety of shaking and mixing applications. A powerful brushless motor and counter-balanced shaker mechanism provides smooth operation for years of troublefree use. Different platforms (order separately) are available and are easily interchangeable. w Two stainless steel platform options w 9 mm orbit for aeration of cultures and staining gels w Large digital display with single-knob control w Digital control of shaking speed and time w Safe for cold room or incubator use w Maximum capacity: 4 x L, 5 x 500 ml, 9 x 250 ml, or 6 x 25 ml Orbital shaker with optional clamps and flasks VWR Plug Speed Dimensions Cat. No. Description Voltage Type (rpm) Weight (L x W x D) Qty/Cs LSE orbital shaker 20V, US lbs. 0. x 2.5 x 5 in. 50/60Hz (7.3 kg) (25.6 x 3.8 x 2.7 cm) Accessories VWR Cat. No. Description Qty/Cs Flat platform with rubber mat Flask clamp platform (without clamps) * Clamp for 25 ml flask * Clamp for 50 ml flask * Clamp for 25 ml flask * Clamp for 250 ml flask * Clamp for 500 ml flask * Clamp for L flask Clamp for 2,000 ml flask (for use with 7L shaking incubator only) * Also fits the 49L and 7L shaking incubators, see pages 8 and 9. 7

10 Constant Temperature Equipment Corning LSE Benchtop Shaking Incubator Truly a benchtop style, the lid on the Corning benchtop shaking incubator has a low pivot point which provides a space-saving size sure to fit on the lab bench and under shelves. Each unit includes a software package, which provides the option of saving data to an external computer or monitoring rpm and temperature throughout runs. The maximum capacity is 4 x L flasks. Specifications Temperature Range Operation Temperature Range 4 C to 65 C Shaker Speed Shaker Timer Temperature Increments Speed Increments Platform Dimensions Dimensions (W x D x H) Weight Height Lid Open Communication Port Ordering Information Ambient +5 C to +70 C 20 to 300 rpm minute to 99 hours or continuous 0. C rpm.8 x.8 in. (30 x 30 cm) 4.6 x 20.9 x 5.7 in. (37 x 53 x 40 cm) 43 lbs. (9.5 kg) 2.7 in. (55 cm) USB to monitor temperature and rpm VWR Cat. No. Description Qty/Cs LSE Benchtop shaking incubator with platform, 20V Universal platform, 30 x 30 cm Petri dish shelf Sticky mat, 50 x 50 x 30 mm Microtiter hotel, holds maximum 4 microplates Combination tube holder, 6 x 5/50 ml tubes Plastic clamp, 25 ml Plastic clamp, 250 ml Plastic clamp, 500 ml Plastic clamp,,000 ml Corning LSE 49L Shaking Incubator This cabinet-style incubator has a compact footprint and can also be stacked to maximize space efficiency. The built in orbital shaker accepts a large assortment of platforms and clamps that can accommodate flasks, Petri dishes, and test tube racks. The maximum capacity is 4 x L flasks. For accessories, see page 7. Specifications Chamber Volume Temperature Range/Display Temperature Uniformity/Accuracy Shaker Speed Shaker Timer Shaker Orbit Flask Capacity Construction Chamber (W x D x H) Exterior (W x D x H) Weight 49L/.7 cu. ft. Ambient +5 to 80 C in 0. C increments/digital ±0.25 C/±0. C 20 to 400 rpm (maximum 300 rpm when stacked) 0 to 99 minutes or continuous 9 mm 4 x L, 5 x 500 ml, 9 x 250 ml, 6 x 25 ml Interior: Mirrored stainless steel Exterior: Cold rolled steel 3.5 x 4.75 x 5 in. (34.3 x 37.5 x 38. cm) 23 x 9.25 x in. (42.5 x 55 x 58 cm) 83 lbs. (37.7 kg) 8

11 Ordering Information VWR Cat. No. Description Qty/Cs LSE Shaking incubator, 49 Liters, 20V Flask clamp platform, pre-drilled Flat platform with nonslip rubber mat (300 x 300 mm) Double flat platform with non-slip rubber mat (300 x 300 mm) Universal spring-loaded clamp platform for Cat. No Shelf, full, for Cat. No Stacking adapter for Cat. No Corning LSE 7L Shaking Incubator This high performance shaking incubator has a full size glass door and internal light that allows easy viewing of samples without disturbing the chamber contents. Mechanical convection provides a safe, stable temperature environment and fast chamber temperature recovery after opening the door. The maximum capacity is 4 x 2L/6 x L flasks. For accessories, see page 7. Specifications Chamber Volume 7L/2.5 cu. ft. Temperature Range/Display Ambient +5 to 80 C Temperature Uniformity/Accuracy ±0.2 C at 37 C Temperature Display Shaker Speed Shaker Orbit Shaker Timer Dimensions (W x D x H) Weight Ordering Information 0. C 20 to 300 rpm 9 mm 0 to 99 minutes or continuous Chamber: 7.4 x 5.6 x 6 in. (44.2 x 39.6 x 40.6 cm) Exterior: 22.6 x 2.4 x 25 in. (57.4 x 54.4 x 63.5 cm) 40 lbs. (63.6 kg) VWR Cat. No. Description Qty/Cs LSE Shaking incubator, 7L, 20V Shaking platform pre-drilled for flask clamps Flat shaker platform with non-slip rubber mat (390 x 330 mm) Platform with 4 x 2L flask clamps Platform with 6 x L flask clamps Platform with 8 x 500 ml flask clamps Platform with 2 x 250 ml flask clamps Platform with 20 x 25 ml flask clamps Platform with 30 x 50 ml flask clamps Rack holder for 5 ml test tubes Rack holder for 50 ml test tubes Shelf, full, for Cat. No

12 Corning LSE 6 Liter Digital Water Bath The Corning LSE Digital Water Bath is constructed from corrosion-resistant stainless steel and can accommodate up to 6 liters of water or can serve as a dry bath when using thermal beads. w Compact design w Stainless steel cover to retain heat and minimize evaporation w Powerful 500W heater programmed by LED digital controller w Precise temperature control by hydraulic thermostat Specifications Chamber capacity Chamber construction Chamber maximum load 6L Stainless steel 20 lbs. (9.09 kg) Temperature range Ambient +5 C to 99 C Exterior dimensions 4.9 x.4 x 9.0 in. (2.9 in. with cover) (W x D x H) 38 x 29 x 23 cm (33 cm with cover) Chamber dimensions Weight Ordering Information VWR Cat. No. 2.6 x 6.7 x 6.9 in. (32 x 7 x 8 cm) 9 lbs. (8.6 kg) Description Digital water bath, 6L, 20V Single block digital dry bath heater Double block digital dry bath heater Four block digital dry bath heater Corning LSE Digital Dry Bath Heater A broad temperature range to 50 C makes Corning LSE digital s useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories. Models are available for one or two sample blocks, and a variety of blocks are available for different sample containers. Temperature and time accurately controlled by a microprocessor and shown on a large 4-digit LED display. w Microprocessor control with large digital display for temperature and time w Temperature accuracy of ±0.3 C and uniformity of ±0.2 C w Wide temperature set range from ambient +5 C to 50 C w Corrosion-resistant block cavity VWR Cat. No. Description Block Capacity Voltage Plug Weight Dimensions (L x W x H) Qty/Cs LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital LSE digital Single 20V US 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Dual 20V US 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Four 20V US 9.6 lbs. (4.4 kg) 8.3 x 6.3 x 4.7 in. (2 x 39 x 2 cm) Single 230V EU 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Dual 230V EU 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Four 230V EU 9.6 lbs. (4.4 kg) 8.3 x 6.3 x 4.7 in. (2 x 39 x 2 cm) Single 230V UK 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Dual 230V UK 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Four 230V UK 9.6 lbs. (4.4 kg) 8.3 x 6.3 x 4.7 in. (2 x 39 x 2 cm) Single 00V JP 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Dual 00V JP 7.0 lbs. (3.2 kg) 8.3 x 2.4 x 4.7 in. (2 x 29 x 2 cm) Four 00V JP 9.6 lbs. (4.4 kg) 8.3 x 6.3 x 4.7 in. (2 x 39 x 2 cm) 0

13 Accessories Digital accessories VWR Cat. No. Description Qty/Cs Single block, 48 x 0.2 ml PCR tubes or 6 x 0.2 ml strips Single block, 24 x 2.0 ml tubes Single block, 24 x 0.5 ml tubes Single block, 24 x.5 ml tubes Single block, 35 x 6 mm tubes Single block, 20 x 0 mm tubes Single block, 20 x 2 mm tubes Single block, 20 x 3 mm tubes Single block, 2 x 5 ml centrifuge tubes Single block, 2 x 6 mm tubes Single block, 2 x 7 mm tubes Single block, 6 x 20 mm tubes Single block, 6 x 25 mm tubes Single block, 5 x 50 ml centrifuge tubes (for single block unit only) Single block, 96-well PCR plate, skirted or nonskirted Dual block, 96-well multiple well plate or 4 slides (for dual block unit only) Dual block, 96-well PCR plate, skirted, or nonskirted (for dual block unit only) Dual block, 384-well PCR plate (for dual block unit only) Corning Digital Hot Plates, Stirrers, and Stirring Hot Plates Corning digital hot plates, stirrers, and stirring hot plates are made with the same durability and quality Corning has been putting into Pyroceram top products since 964. All models include a Pyroceram top and a two-year warranty. w Twin display stirring hot plate shows both temperature and stirring speed on separate digital displays to ensure accuracy w Temperature accuracy within ±2 C and stirring speeds at ±5% of the speed setting you choose w Digital displays indicate when set temperature and stirring speeds are reached w Safety indicators power button and hot top indicators warn if unit is plugged in or is too hot to touch w Angled front panel and large knobs minimize damage from spills w PC-400D/40D/420D top plate size: 5 x 7 in. (2.7 x 7.8 cm) w PC-600D/60D/620D top plate size: 0 x 0 in. (25.4 x 25.4 cm) Digital Hot Plates Model PC-400D VWR Cat. No. Model Voltage Temperature Range Dimensions (L x W x D) PC-400D 20V/60Hz 5 C C 4.3 x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-600D 20V/60Hz 5 C C 4.6 x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) * PC-400D 230V/50Hz 5 C C 4.3 x 7.7 x in. (0.8 x 9.7 x 28 cm) * PC-600D 230V/50Hz 5 C C 4.6 x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-400D 00V/60Hz 5 C C 4.3 x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-600D 00V/60Hz 5 C C 4.6 x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-400D 230V/50Hz 5 C C 4.3 x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-600D 230V/50Hz 5 C C 4.6 x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) *

14 Digital Stirrers Model PC-40D Model PC-420D VWR Cat. No. Model Voltage Stir Range (rpm) Dimensions (L x W x D) PC-40D 20V/60Hz 60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-60D 20V/60Hz 60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) * PC-40D 230V/50Hz 60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) * PC-60D 230V/50Hz 60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-40D 00V/60Hz 60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-60D 00V/60Hz 60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-40D 230V/50Hz 60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-60D 230V/50Hz 60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) Digital Stirring Hot Plates Temperature/ VWR Cat. No. Model Voltage* Stir Range (rpm) Dimensions (L x W x D) PC-420D 20V/60Hz 5 C C/60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-420D 20V/60Hz 5 C C/60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-620D 20V/60Hz 5 C C/60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-620D 20V/60Hz 5 C C/60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) * PC-420D 230V/50Hz 5 C C/60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) * PC-620D 230V/50Hz 5 C C/60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-420D 00V/60Hz 5 C C/60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-620D 00V/60Hz 5 C C/60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) PC-420D 230V/50Hz 5 C C/60 -, x 7.7 x in. (0.8 x 9.7 x 28 cm) PC-620D 230V/50Hz 5 C C/60 -, x 7.7 x 5.4 in. (.75 x 9.7 x 39. cm) Cat. Nos and include the 20V stirring hot plate plus temperature controller, support rod, and stir bar retriever. * Corning Analog Hot Plates, Stirring Hot Plate, and Stirrers PC-200 Hot Plate Corning s exclusive glass-ceramic Pyroceram top is standard. w Micro-chemistry size w Hot top indicator light w 2-year warranty Dimensions VWR Cat. No. Model Power Top Size Temperature Weight (H x W x D) PC V/60Hz/ 4" x 5" 77 F F 4 lbs. 4.4 x 5.8 x 7.3 in. 253W/2.A (25 C C) (.8 kg) (.2 x 4.7 x 8.5 cm) 2

15 Corning Scholar PC-70 Hot Plate An economically priced hot plate that has a white enameled steel top plate that provides heat transfer up to 360 C. Dual heat shields dissipate heat and keep the case cool to the touch. w Compact, saves on bench space w UL/CUL approved w -year warranty Dimensions VWR Cat. No. Model Power Top Size Temperature Weight (H x W x D) PC-70 20V/60Hz/ 5" x 5" 40 F F 3 lbs. 4 x 5 x 5 in. 250W/2.A (60 C C) (.3 kg) (0.2 x 2.7 x 2.7 cm) PC-220 Hot Plate/Stirrer Hot plate/stirrer units come with Corning s exclusive Pyroceram top. w Micro-chemistry size w Hot top indicator light w Glass ceramic top w 2-year warranty Top Stir Range Dimensions VWR Cat. No. Model Power Size (rpm) Temperature Weight (L x W x D) PC V/60Hz/ 4"x 5" 60 -,00 77 F F 5.0 lbs. 4.4 x 5.8 x 7.3 in. 283W/2.4A (25 C C) (2.3 kg) (.2 x 4.7 x 8.5 cm) PC-20 Stirrer PC-20 stirrers come with Corning s Pyroceram top. w Micro-chemistry size w 2-year warranty Stir Range Dimensions VWR Cat. No. Model Power Top Size (rpm) Weight (L x W x D) PC-20 20V/60Hz/ 4" x 5" 60 -, lbs. 4.4 x 5.8 x 7.3 in. 33W/0.3A (2 kg) (.2 x 4.7 x 8.5 cm) 3

16 PC-6 Stirrer The PC-6 is designed to stir large volumes of liquid with ease. The stirrer is designed for 5 gallon vessels (9L) but can stir up to 0 gallons. This powerful stirring is achieved with a very compact design that conserves bench space. The stirrer uses a magnet that is constructed out of rare earth metals for exceptional coupling strength. The magnet s strength also centers the stir bar quickly inside the vessel. Heavy duty motor and rugged plastic (ABS) top will provide years of reliable service. UL/CUL approved, one year warranty. Special features: The PC-6 achieves vigorous stirring with a more compact unit at a lower cost than competitive units. This high volume stirrer can handle many applications that previously required an overhead stirrer. VWR Cat. No. Model Power Top Size Stir Range (rpm) Weight Dimensions (L x W x D) PC-6 20V/50-60Hz/ " x " 00 -,500.0 lbs. 4.8 x 2.0 x 4.4 in. 44W/.2A (5 kg) (.9 x 4.7 x 5.7 cm) Corning Scholar PC-7 Stirrer The Corning Scholar PC-7 stirrer provides compact design, vigorous stirring with alternating current motor for longer life and rugged construction. UL/CUL approved, -year warranty. VWR Cat. No. Model Power Top Size Stir Range (rpm) Weight Dimensions (L x W x D) PC-7 20V/60Hz/ 5" x 5" 00 -,600 4 lbs. 3.2 x 5.0 x 5.0 in. 30W/0.25A (.8 kg) (.3 x 2 x 2 cm) SS2I Stirrer One-position slow speed stirrer with integral control to accommodate up to a 2L vessel. One-position model allows the user to spend less and save valuable bench space compared to multiple-position units. Integral speed control and glass-filled resin platform material. Speed Nom. Max. Vessel Dimensions VWR Range No. Stir Vol. Diam. (mm) Weight Motor Cat. No. Model Power (rpm) Pos. per Pos. (mm) (L x W x D) (kg) Type SS2I 20V/ L x 0.9 DC, 60Hz 50 x 70 stepper SS0I Stirrer One-position slow speed stirrer with integral control to accommodate up to a 0L vessel. Smooth reliable stirring at slow speeds helps promote healthy cell growth. Integral speed control and glass-filled resin platform material. Speed Nom. Max. Vessel Dimensions VWR Range No. Stir Vol. Diam. (mm) Weight Motor Cat. No. Model Power (rpm) Pos. per Pos. (mm) (L x W x D) (kg) Type SS0I 20V/ L x 2.6 DC, 60Hz 260 x 70 stepper SS4I Stirrer Four-position slow speed stirrer with integral control to accommodate up to four L vessels. Multiple positions allow the user to duplicate stirring conditions in up to four vessels. Integral speed control and glass-filled resin platform material. Nom. Max. Vessel Dimensions VWR Speed No. Stir Vol. Diam. (mm) Weight Motor Cat. No. Model Power Range (rpm) Pos. per Pos. (mm) (L x W x D) (kg) Type SS4I 20V/ L x 3 DC, 60Hz 260 x 70 stepper 4

17 MP4I, MP5I, and MP9I Multiple Position Stirrers with Integral Control Corning now offers stirrers that stir up to nine vessels at the same time. These stirring platforms come in 4-, 5-, and 9-position models. The unit s magnets and DC motor provide smooth, well-coupled stirring up to 2,000 rpm. The speed of all positions on the units is set simultaneously with the integral knob. Integral speed control and glass-filled resin platform material. Nom. Max. Vessel Dimensions VWR Speed No. Stir Vol. Diam. (mm) Weight Motor Cat. No. Model Power Range (rpm) Pos. per Pos. (mm) (L x W x D) (kg) Type MP4I 20V/ 350-2,000 4 L x 3. DC 60Hz 260 x MP5I 20V/ 350-2, ml x 3.2 DC 60Hz 260 x MP9I 20V/ 350-2, ml x 3.8 DC 60Hz 260 x 70 Stir Bars and Stir Bar Retriever Corning magnetic stir bars are polytetrafluorethylene (PTFE)-coated for increased chemical resistance. The Corning stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory. The container must be taken off the magnetic stirrer before using the retriever as the high powered magnet in the stirrer cancels out the one in the retriever. The handle is designed for ergonomic and easy retrieval. VWR Cat. No. Description Use with Model Qty/Pk Qty/Cs Stir bar, 3/8" x 2" PC-60D/620D Stir bar, 3/8" x " PC-20/220/40D/420D Magnetic stir bar retriever All Corning stirrers and hot plate/stirrers Temperature Controller and Accessories When used with the digital hot plate or stirring hot plate, the external temperature controller ensures precision temperature accuracy of the liquid inside the vessel as opposed to the temperature of the hot plate top. Digital hot plate accessories VWR Cat. No. Description Use with Model Accessory kit PC-400D/420D/600D/620D Includes: External temperature controller (Cat. No. 6795PR), 8" support rods (Cat. No ), and stir bar retriever (Cat. No. 6970SR) Stainless steel support rod, two 9" (45.7 cm) rods, All digital and PC-200/20/220 5 /6" diameter. Rods can be screwed together to 8" Stainless steel support rod, 24" (6.0 cm), PC-600D/60D/620D 7 /6" diameter Stainless steel support rod, 2" (30.5 cm), All digital and PC-200/20/220 5 /6" diameter * Boss head clamp for use with 5 /6" support rod and All hot plates with 5 /6" or smaller holding rod support rod Holding rod, thermocouple, stainless steel All hot plates *Bosshead clamps to support rod; holding rod connects to bosshead. Temperature controller slides into holding rod. 5

18 Catalog Number Index VWR Cat. No. Corning Cat. No. Page No. VWR Cat. No. Corning Cat. No. Page No. VWR Cat. No. Corning Cat. No. Page No DB DB DB FB FB FB FB SB SB SB SB DB D D D D KIT D D D D D D D D KIT D D D D KIT SR D D D D D D D D D HS NP FP

19 Notes 7

20 Beginning-to-End Solutions for Cell Culture Drug Discovery Genomics Microbiology Chemistry At Corning, we continuously strive towards improving efficiencies and developing new products and technologies for life science researchers. We have scientists working in Corning R&D labs across the globe, doing what you do every day. Our technical experts understand your challenges and your increased need for high-quality products. It is this expertise, plus a 60-year legacy of Corning innovation and manufacturing excellence, that puts us in a unique position to be able to offer a beginning-to-end portfolio of high-quality, reliable life sciences consumables. For additional product or technical information, visit vwr.com/corninglifesciences, call , or contact your VWR representative. Warranty/Disclaimer: Unless otherwise specified, all products are for research use only. Not intended for use in diagnostic or therapeutic procedures. Corning Life Sciences makes no claims regarding the performance of these products for clinical or diagnostic applications. For a listing of trademarks, visit All other trademarks are the property of their respective owners. 067 Lit. No WREV Corning Incorporated. All rights reserved. Printed in USA 6/7 CLS-EQ-090 VWR REV3