shak er ES-X (Lab-Shaker) Shaker with separate control unit suitable for use in incubators with humidity

Size: px

Start display at page:

Download "shak er ES-X (Lab-Shaker) Shaker with separate control unit suitable for use in incubators with humidity"

Jade Barrett
6 years ago
Views:

1 shak er ES-X (Lab-Shaker) Shaker with separate control unit suitable for use in incubators with humidity

ES-X with separate controller The ES-X is a

It is ideal for use in existing incubators or

with its stainless steel casing can be placed in

temperature controlled rooms Ideal for cell culture

systems Minimal heat transfer and low energy

Installation in existing incubators Extremely low

transfer makes the ES-X the perfect choice for cell

The shaker will not affect the chamber temperature

The control unit remains outside the incubator

This access port needs to be at least 3mm diameter

The ES-X can also be integrated with robotic systems.

2 ES-X with separate controller The ES-X is a specially designed shaker with a separate controller. It is ideal for use in existing incubators or temperature controlled rooms as the shaking unit with its stainless steel casing can be placed in areas of high temperature (up to 80 C) and humidity (up to % rh). Performance characteristics For use in incubators or temperature controlled rooms Ideal for cell culture applications Special version available for robotic systems Minimal heat transfer and low energy consumption + Stainless steel motor casing Installation in existing incubators Extremely low energy consumption combined with minimal heat transfer makes the ES-X the perfect choice for cell culture applications in existing CO incubators. The shaker will not affect the chamber temperature and will not be damaged by the humid conditions. The control unit remains outside the incubator connected to the shaker via an access port. This access port needs to be at least 3mm diameter to accept the cable. The ES-X can also be integrated with robotic systems. Moreover, 8 different stopping points can be programmed. As with all Kuhner shakers, the ES-X is reliable, capable of high speeds, maintenance-free and backed by a five year warranty. There are three standard shaking diameters 1., and 0mm, with custom shaking diameters available upon request.

ES-X (Lab-Shaker) 3 Dimensions Technical data Machine SMX1300 Weight 60kg Operating menu in de, fr, it, en, es Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Ambient

motion Speed * orbital, Ø 1.mm 0...00 rpm EX (00 x 0mm) * orbital, Ø.0mm 0...00 rpm F (800 x 0mm) * orbital, Ø 0.0mm 0...300 rpm Loading, maximum kg * linear, Ø 1.mm 0...00 rpm Setting, digital 1 rpm * linear, Ø.

3 ES-X (Lab-Shaker) 3 Dimensions Technical data Machine SMX1300 Weight 60kg Operating menu in de, fr, it, en, es Interface, standard CAN-Bus Interface, optional USB, Ethernet, digital, analogue Ambient temperature -0 C up to 80 C Control unit 0 C up to 60 C Consumption, maximum 6W (130W with high torque drive SMX1031) Consumption, typical W Shaking unit 1 x Tray, size E (0 x 0mm) or or Shaking motion Speed * orbital, Ø 1.mm rpm EX (00 x 0mm) * orbital, Ø.0mm rpm F (800 x 0mm) * orbital, Ø 0.0mm rpm Loading, maximum kg * linear, Ø 1.mm rpm Setting, digital 1 rpm * linear, Ø.0mm rpm Accuracy, absolute ± 0.1 rpm * linear, Ø 0.0 mm rpm Timer 1s...h * can be changed Acceleration controlled Active brake adjustable Stop on position adjustable Mains connection SMX V / 0-60 Hz SMX V / 0-60 Hz SMX V / 0-60 Hz SMX10-10 V / 0-60 Hz

4 Clamps of different sizes Test tube holders Accessories To suit your application Universal trays The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, sticky mats, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. SM300 Universal tray EU (0 x 0 mm) SMX300 Universal tray EXU (00 x 0 mm) SM3003 Universal tray FU (800 x 0 mm) Clamps for Erlenmeyer flasks Flask size in ml for 1 clamp Max. number of clamps per Universal tray EU EXU FU SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM

ES-X (Lab-Shaker) Tray F-0 with fixed clamps

They offer maximum security and will often

variety of flask clamp sizes from to 6000ml.

ml 81 SM3000 E-0 ml 0 SM30100 E-100 ml 3

E-00 ml 0 SM300 E-0 ml 18 SM30300 E-300 ml 1

E-100 ml SM3000 E-000 ml SM33000 E-3000 ml

E-6000 ml 1 Tray EX (00 x 0 mm) with fixed

EX-00 ml 7 SMX300 EX-0 ml SMX30300 EX-300 ml

SMX3000 EX-000 ml SMX36000 EX-6000 ml Tray F

SM3300 F- ml 13 SM33000 F-0 ml 100 SM330100

5 ES-X (Lab-Shaker) Tray F-0 with fixed clamps Trays with fixed clamps The clamps are riveted onto these trays and cannot be removed. They offer maximum security and will often hold a larger number of flasks than universal trays. These trays (E, EX and F) are available in a variety of flask clamp sizes from to 6000ml. Tray E (0 x 0 mm) with fixed clamps SM300 E- ml 81 SM3000 E-0 ml 0 SM30100 E-100 ml 3 SM301 E-1 ml 30 SM3010 E-10 ml 30 SM3000 E-00 ml 0 SM300 E-0 ml 18 SM30300 E-300 ml 1 SM3000 E-00 ml 1 SM31000 E-1000 ml SM3100 E-100 ml SM3000 E-000 ml SM33000 E-3000 ml SM3000 E-000 ml SM3000 E-000 ml SM36000 E-6000 ml 1 Tray EX (00 x 0 mm) with fixed clamps # of clamps # of clamps SMX300 EX- ml 0 SMX3000 EX-0 ml 6 SMX30100 EX-100 ml SMX301 EX-1 ml 36 SMX3010 EX10 ml 36 SMX3000 EX-00 ml 7 SMX300 EX-0 ml SMX30300 EX-300 ml 1 SMX3000 EX-00 ml 1 SMX31000 EX-1000 ml SMX3100 EX-100 ml 8 SMX3000 EX-000 ml 6 SMX33000 EX-3000 ml SMX3000 EX-000 ml 3 SMX3000 EX-000 ml SMX36000 EX-6000 ml Tray F (800 x 0 mm) with fixed clamps # of clamps SM3300 F- ml 13 SM33000 F-0 ml 100 SM F-100 ml 7 SM3301 F-1 ml 60 SM33010 F-10 ml 60 SM33000 F-00 ml 0 SM3300 F-0 ml 0 SM F-300 ml 30 SM33000 F-00 ml 6 SM F-1000 ml 16 SM33100 F-100 ml 1 SM33000 F-000 ml SM F-3000 ml 8 SM33000 F-000 ml SM33000 F-000 ml SM F-6000 ml 3

F-tray with sticky mats Trays for microtiter plates Kuhner has designed trays

Handles at the front of the tray open and close the special clamping mechanism

Trays of different heights (, 7 and 77mm) allow the stacking of up to four microtiter

The trays are suitable for all types of plates (deep well, low well,, 8 and 6 well).

SM303. F-MT. - 8 SM303.7 F-MT.7-6 SM303.77 F-MT.

particularly suitable for shaking containers at low speed (e.g. blood bags).

(800 x 0 mm) Trays with sticky mats A tray fitted with sticky mats is especially

The flask is placed directly on the sticky mat without the need for any other support.

Sticky mats are available individually or in sets and can also be supplied already

6 Tray for centrifuge tubes Each mat is 0 x 0cm and can be cut to size.

SM370 E-tray with sticky mats (0 x 0 mm) SMX370 EX-tray with sticky mats (00 x 0 mm)

0ml Falcon tubes and TPP 0ml tubes) in cell culture screening is well established.

6 F-tray with sticky mats Trays for microtiter plates Kuhner has designed trays specifically for microtiter plates. Handles at the front of the tray open and close the special clamping mechanism allowing plates to be loaded and unloaded. Trays of different heights (, 7 and 77mm) allow the stacking of up to four microtiter plates. The trays are suitable for all types of plates (deep well, low well,, 8 and 6 well). Tray E (0 x 0 mm) for microtiter plates SM30. E-MT. 1 - SM30.7 E-MT SM30.77 E-MT Tray F (800 x 0 mm) for microtiter plates Microtiter plates Microtiter plates SM303. F-MT. - 8 SM303.7 F-MT.7-6 SM F-MT.77-1 Trays with rubber mat The whole tray is covered with a rubber mat and is particularly suitable for shaking containers at low speed (e.g. blood bags). SM360 Rubber mat EG (0 x 0 mm) SMX360 Rubber mat EXG (00 x 0 mm) SM3603 Rubber mat FG (800 x 0 mm) Trays with sticky mats A tray fitted with sticky mats is especially useful for flasks shaken at low speeds (up to 00rpm). The flask is placed directly on the sticky mat without the need for any other support. Flasks of all sizes can be used. Sticky mats are available individually or in sets and can also be supplied already fitted to a tray. 6 Tray for centrifuge tubes Each mat is 0 x 0cm and can be cut to size. The E-size tray accepts mats while the F-size tray requires 7 mats. SM370 E-tray with sticky mats (0 x 0 mm) SMX370 EX-tray with sticky mats (00 x 0 mm) SM3703 F-tray with sticky mats (800 x 0 mm) Trays for centrifuge tubes The use of centrifuge tubes (e.g. 0ml Falcon tubes and TPP 0ml tubes) in cell culture screening is well established. Kuhner offers special trays in three different sizes for this purpose. The E and EX trays have a capacity of 7 (3x) 0ml centrifuge tubes while the larger F size tray can take 10 (x) 0ml tubes. Holders for 600ml TPP tubes are also available. Tray E (0 x 0 mm) SM380 Tray EX (00 x 0 mm) SMX380 Tray F (800 x 0 mm) SM380 0ml Tube E-tray (EPFL) Centrifuge tubes 7 (3x) Centrifuge tubes 0ml Tube EX-tray (EPFL) 7 (3x) 0ml Tube F-tray (EPFL) Centrifuge tubes 10 (x) ISIS-Software Kuhner developed the user-friendly ISIS-Software for supervision, monitoring, and recording of data. The software is easy to operate. Interfaces Kuhner shakers are equipped with a CAN-bus. CAN-USB, CANEthernet, EMI-60 and NET-60 are all well established interfaces.

7 ES-X (Lab-Shaker) 7 Tray with support bars Trays with support bars These trays offer an alternative to both clamps and sticky mats and are ideal for tall containers. The tray is covered with a rubber mat and has an upright at each corner. E and EX size trays are fitted with four cross supports while the F tray is equipped with six. These support bars securely clamp containers. SM10. Tray F (800 x 0 mm) Vessels SM300 FS-0 10 SM300 FS-0/ 0 ( layers) SM3000 FS-00 8 SM3000 FS-00/ 16 ( layers) SM31000 FS SM31000 FS-1000/ 1 ( layers) EA-tray with rubber mat and cross supports SMX10. EXA-tray with rubber mat and cross supports SM130.6 FA-tray with rubber mat and 6 cross supports Trays for separating vessels Kuhner has also designed a special tray for shaking separating vessels. This very flexible tray can take vessels of various sizes. It is also possible to add a second layer and double the capacity. Movable retaining rods allow vessels to be installed easily. Tray E (0 x 0 mm) Vessels SM00 ES-0 SM0 ES-0/ 10 ( layers) SM000 ES-00 SM00 ES-00/ 8 ( layers) SM1000 ES SM100 ES-1000/ 6 ( layers) Options Tailored options for your shaker Dual table The dual table is an easy and economical way of doubling the shaking capacity. The dual shaking table consists of two levels. Each level will accept an E, EX or F size tray. However, with the dual table the shaking speed is limited to a maximum of 00 rpm. IQ-OQ Documentation IQ-OQ (Installation Qualification and Operation Qualification) is an equipment qualification required for GMP procedures. This service is available from Kuhner and can also be carried out at the customer`s premises.

8 Shakers & Accessories Represented by: Adolf Kühner AG since 1 Dinkelbergstrasse 1 CH 17 Birsfelden ( Basel ) Switzerland phone +1 (0) fax +1 (0) office@kuhner.com

shak er LS-X (Lab-Shaker) Sturdy bench top shaker

shak er LS-X (Lab-Shaker) Sturdy bench top shaker LS-X with a universal tray 2 The Kuhner LS-X is a sturdy bench top shaker designed for continuous and maintenance-free operation. The LS-X shaker has a