The learner independently demonstrates common competencies in electrical installation and maintenance as prescribed by TESDA Training Regulations.
|
|
|
- Spencer Williamson
- 5 years ago
- Views:
Transcription
1 Course Description: K to12 BASIC EDUCATION CURRICULUM INDUSTRIAL ARTS ELECTRICAL INSTALLATION AND MAINTENANCE GRADE 11 (Specialization) Prerequisite: Grade 10 Electrical Installation and Maintenance This is a specialization course which leads to Electrical Installation and Maintenance, National Certificate Level II (NCII). It covers two (2) core competencies that the Grade 11 Technology and Livelihood Education (TLE) student ought to possess: (1) installation of standard electrical protection systems for lighting and grounding, and (2) installation of electrical lighting systems, auxiliary outlets and lighting fixtures. Introduction 1. Basic concepts in electrical installation and maintenance 2. Relevance of the course 3. Career opportunities understanding of the basic concepts and underlying theories in electrical installation and maintenance. The learner independently demonstrates common competencies in electrical installation and maintenance as prescribed by TESDA Training Regulations. INSTALL STANDARD ELECTRICAL PROTECTIONSYSTEM FOR LIGHTING AND GROUNDING (EP) 1. Explain basic concepts in electrical installation and maintenance 2. Discuss the relevance of the course 3. Explore career opportunities in electrical installation and maintenance 1. Operation, reading and proper care and maintenance of different electrical measuring/testing instruments: 1.1 Ohmmeter 1.2 Ammeter Voltmeter 1.3 Volt-Ohmmeter (VOM) or multi tester 1.4 Clamp ammeter 1.5 Kilowatt-hour meter 2. Blueprint reading and interpretation 3. Electrical materials and tools for specific job order understanding of the underlying principles in the installation of standard electrical protection system for lighting and grounding. The learner independently installs electrical protection system for lighting and grounding based on the Philippine Electrical Code (PEC) standards and Local Code/Utility Company Regulations. LO 1. PLAN AND PREPARE WORK 1.1 Read measurements in terms of : Resistance Current Voltage 1.2 Use measuring / testing instruments Ohmmeter Ammeter Voltmeter Volt-Ohmmeter (VOM) or multi tester Clamp ammeter Kilowatt-hour meter 1.3 Interpret blueprint of electrical plan 1.4 Plan and prepare electrical materials and tools for the TLE_IAEI11EP- Ia-j-1 K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 1 of 8
2 installation of: Electrical meter connection and grounding Service entrance and circuit breaker/safety switch installation of a bungalow residential building 4. Electrical meter connection and grounding 5. Service entrance and circuit breaker/safety switch installation LO 2. INSTALL STANDARD ELECTRICAL PROTECTION SYSTEM FOR LIGHTING AND GROUNDING 2.1 Perform the installation of: Electrical meter connection and grounding Service entrance and circuit breaker/safety switch of a residential structure 2.2 Follow schedule of work to ensure completion at agreed time and quality standards 2.3 Check quality of work following instructions and requirements 2.4 Follow safety procedure TLE_IAEI11EP- IIa-j-2 INSTALL ELECTRICAL LIGHTING SYSTEMS, AUXILIARY OUTLETS AND LIGHTING FIXTURES (EL) 1. Lighting fixtures and accessories 1.1 Lamp holders 1.2 Reflectors 1.3 Shades and shields understanding of the underlying principles in the installation of electrical lighting systems, auxiliary outlets and lighting fixtures. The learner independently installs electrical lighting systems, auxiliary outlets and lighting fixtures based on the Philippine Electrical Code (PEC) standards and Local Code/Utility Company Regulations. LO 1. PLAN AND PREPARE WORK FOR A SPECIFIC JOB ORDER 1.1. Choose appropriate lighting fixtures for specific tasks 1.2. Differentiate type of fluorescent lamp 1.3. Identify the parts and discuss the functions of other lamps TLE_IAEI11EL- IIIa-IVj-1 2. Incandescent lamp 2.1 Parts and functions 2.2 Types 1.4. Discuss parts of incandescent K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 2 of 8
3 2.3 Base sizes K to12 BASIC EDUCATION CURRICULUM 3. Fluorescent lamp (20 and 40 watts tubular type) 3.1 Parts and functions 3.2 Assembly 3.3 Troubleshooting and repair of fluorescent lamp assembly 4. Types of fluorescent lamp 4.1 Linear 4.2 Circular 4.3 Compact fluorescent lamp (CFL) 5. Light emitting diode (LED) lamp 6. Other lamps: 6.1 Mercury lamp 6.2 Sodium vapor lamp 6.3 Halogen lamp 7. Electrical wiring plan lamp and its function 1.5. Troubleshoot defective fluorescent lamp assembly 1.6. Prepare an electrical wiring plan of a bungalow residential building based on the Philippine Electrical Code requirements 1.7. Estimate the materials needed for the job K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 3 of 8
4 Course Description: K to12 BASIC EDUCATION CURRICULUM INDUSTRIAL ARTS ELECTRICAL INSTALLATION AND MAINTENANCE GRADE 12 (Specialization) Prerequisite: Grade 11 Electrical Installation and Maintenance This is a specialization course which leads to an Electrical Installation and Maintenance National Certificate Level II (NCII). It covers two (2) core competencies that the Grade 12 Technology and Livelihood Education (TLE) student ought to possess: (1) installation of electrical lighting systems, auxiliary outlets and lighting fixtures; and 2) maintenance and troubleshooting work. Introduction 1. Basic concepts in Electrical Installation and Maintenance 2. Relevance of the course 3. Career opportunities understanding of the basic concepts and underlying theories in electrical installation and maintenance. The learner independently demonstrates the common competencies in electrical installation and maintenance as prescribed by TESDA Training Regulations. 1. Explain basic concepts in electrical installation and maintenance 2. Discuss the relevance of the course 3. Explore career opportunities in electrical installation and maintenance INSTALL ELECTRICAL LIGHTING SYSTEMS, AUXILIARY OUTLETS AND LIGHTING FIXTURES (EL) 1. Electrical tools, equipment and materials for specific job order 2. Different types of wiring methods approved in the Philippine condition. 2.1 Open wiring on insulator 2.2 Concealed wiring installation Non-metallic sheathed cable 2.3 Flexible conduit (metal & non-metal) 2.4 Surface raceway (metal and non-metal) 3. Basic electrical wiring installations 3.1 Circuit with one bulb controlled by surface or flush type single pole LO 1. INSTALL ELECTRICAL SYSTEMS, AUXILIARY OUTLETS AND LIGHTING FIXTURES 1.1 Select appropriate electrical tools, equipment and materials for specific tasks 1.2 Apply suitable wiring method for the job 1.3 Install electrical wiring systems using different types of wiring methods: Circuit with one bulb controlled by surface or flush type single pole switch Circuit using 3-way switches in 2 locations Circuit using 3- way and 4- way switches in 3 locations Combination of lighting and convenience outlets TLE_IAEI12EL- Ia-IIj-1 K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 4 of 8
5 switch 3.2 Circuit using two 3-way switches 3.3 Circuit using two 3- way and one 4-way switches 3.4 Combination of lighting and convenience outlets 4. Republic Act 7832: the Anti-electricity and Electric Transmission Lines/Materials Pilferage Act of Acts punishable under RA Section 2: Illegal use of electricity 4.3 Sec. 3: Theft of electric power transmission lines/materials 4.4 Sec. 4: Prima facie evidence of illegal use of electricity 4.5 Sec. 7: Penalties PERFORM MAINTENANCE AND TROUBLESHOOTING WORK (TW) 1. Testing wiring installation for possible circuit defects: 1.1. Open/loose wiring connections 1.2. Short circuit 1.3. Grounded circuit understanding of the concepts and underlying principles in the maintenance of electrical tools and equipment and troubleshooting work. The learner independently performs proper maintenance of electrical tools and equipment and troubleshooting based on industry standards. LO 1. PREPARE MAINTENANCE WORK 1.1 Test wiring installations for defects such as: 1.1. Open/loose circuit 1.2. Short circuit 1.3. Grounded circuit 1.2 Develop maintenance plan TLE_IAEI12TW- IIIa-IVj-1 K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 5 of 8
6 2. Maintenance and safety Measures: 2.1. Electrical wiring installation 2.2. Working area LO 2. MAINTAIN ELECTRICAL SYSTEM 2.1. Check wiring installations periodically 2.2. Perform housekeeping in the working area TLE_IAEI12TW- IIIa-IVj-2 3. Troubleshoot defects LO 3. TROUBLESHOOT DEFECTS OF AN ELECTRICAL SYSTEM TLE_IAEI12TW- IIIa-IVj Identify defects of an electrical system 3.2. Repair defects of an electrical system K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 6 of 8
7 GLOSSARY K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 7 of 8
8 INDUSTRIAL ARTS ELECTRICAL INSTALLATION AND MAINTENANCE Code Book Legend Sample: TLE_IAEI11EP-Ia-j-1 LEGEND SAMPLE DOMAIN/ COMPONENT CODE First Entry Uppercase Letter/s Learning Area and Strand/ Subject or Specialization Technology and Livelihood Education_Industrial Arts Electrical Installation and Maintenance Grade Level Grade 11 Domain/Content/ Component/ Topic Install Standard Electrical Protection system For Lighting And Grounding TLE_IA EI 11 EP Install Standard Electrical Protection system For Lighting And Grounding Install Electrical Lighting Systems, Auxiliary Outlets And Lighting Fixtures Perform Maintenance And Troubleshooting Work EP EL TW - Roman Numeral *Zero if no specific quarter Lowercase Letter/s *Put a hyphen (-) in between letters to indicate more than a specific week Quarter First Quarter I Week Week One to Ten a-j - Arabic Number Competency Plan And Prepare Work 1 K to 12 TVL Track Industrial Arts Electronic Installation and Maintenance Curriculum Guide December 2013 *LO Learning Outcome Page 8 of 8
Electrical Systems and Fault Finding
Unit 31: Unit code Electrical Systems and Fault Finding A/615/1500 Unit level 4 Credit value 15 Introduction Electrical systems can be found in a very wide range of locations such as in manufacturing facilities,
Automotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
Mechatronics & Industrial Automation Technician
Brief Program Description The Mechatronics & Industrial Automation Technician program is a 9 week program designed to help students develop the skills and knowledge needed for work as entry-level industrial
So, You re Thinking About Converting to LEDs?
So, You re Thinking About Converting to LEDs? For More Information Please contact: Roberts Research & Consulting, Inc. 3 Garrison Road, Burnt Hills, NY 12027 vic25@robertsresearchinc.com Don t forget to
Program SLOs Automotive Mechanics Technology
Program SLOs Automotive Mechanics Technology A.A. Automotive Mechanics Technology Certificates of Achievement Automotive Mechanics Technology, Automotive Engine Performance, Automatic Transmissions/Transaxles,
LIGHTING SPECIFICATIONS
Incentives: Specifications LIGHTING SPECIFICATIONS All lighting projects are expected to comply with the Illuminating Engineering Society of North America (IESNA) recommended lighting levels or the local
Demonstrate knowledge of electrical theory for Electrical Service Technician B
Demonstrate knowledge of electrical theory for Electrical Service Technician B 10937 version 4 Page 1 of 5 Level 3 Credits 3 Purpose 'Electrical Service Technician B' (EST B) refers to a class of electrical
Automotive Curriculum
Automotive Curriculum Degrees: Credential(s) AAS: Automotive Technology Tracks: Automotive Technician Track 69-72 Automotive Parts/Service Writer Track 61-64 Diploma: Automotive Technician 61-64 Automotive
Lighting Tables for Existing/Base Equipment 4/15/2011
T12 Fluorescent Lamps and Fixtures Lighting Tables for Existing/Base Equipment 4/15/2011 LENGTH WATTS LENGTH WATTS 2' F20T12 1 8000 28 5 F60T12 1 8029 100 2 8001 46 2 8030 135 3 8002 68 F60T12 HO 1 8031
These are the specializations and their pre-requisites. These lists should be used as reference for curriculum maps.
These are the specializations and their pre-requisites. These lists should be used as reference for curriculum maps. AGRI-FISHERY ARTS Specialization Number of Hours Pre-requisite 1. Agricultural Crops
Lighting Tables for New Equipment 7/16/2008
T8 and SUPER T8 Fluorescent Lamps and Fixtures with Electronic Ballasts LENGTH 2' F17T8 1 18 200 9.00 --- --- 2 32 201 9.00 --- --- 3 48 202 15.00 --- --- 4 57 203 15.00 --- --- F17T8 with Reflectors 1
Lighting Tables for Existing/Base Equipment 4/15/2011
T12 Fluorescent Lamps and Fixtures Lighting Tables for Existing/Base Equipment 4/15/2011 LENGTH WATTS LENGTH WATTS 2' F20T12 1 8000 28 5 F60T12 1 8029 100 2 8001 46 2 8030 135 3 8002 68 F60T12 HO 1 8031
CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A. Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS:
A. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1445 AIRCRAFT ELECTRICAL SYSTEMS-A Semester Hours Credit: 4 INSTRUCTOR: OFFICE HOURS: A. An aviation maintenance technician must understand the basic electrical
Engineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)
Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,
Mechanical Drives
Western Technical College 10620144 Mechanical Drives Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 2.00 Total Hours 54.00 Mechanical drive components
Lessons Learned in Lighting Equipment Testing in the Philippines
Lessons Learned in Lighting Equipment Testing in the Philippines Engr. Arturo M. Zabala, PEE Fuels and Appliance Testing Laboratory DEPARTMENT OF ENERGY Lessons Learned in Asia: Regional Symposium on Energy
Unit 10 Measuring Instruments
Objectives: Unit 10 Discuss the operation of a d Arsonval meter movement. Connect a voltmeter to a circuit. Read an analog multimeter. Connect an ammeter. Measure resistance using an ohmmeter. Analog meters
Electrical Equipment and Terminology
Youth Explore Trades Skills Description Understanding the language of the electrical trade and knowing what electrical equipment is named and its purpose are very important. Anyone who is exposed to a
Auto Service Technician
Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service
CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS:
I. INTRODUCTION CENTRAL TEXAS COLLEGE AERM 1314 BASIC ELECTRICITY-G Semester Hours Credit: 3 INSTRUCTOR: OFFICE HOURS: A. Electricity is a vital part of modern aviation technology. This course lays the
Revised December, Copyright reserved (NVTI Testing Division)
NATIONAL VOCATIONAL TRAINING INSTITUTE TESTING DIVISION TRADE TESTING REGULATIONS AND SYLLABUS TRADE: MOTOR VEHICLE ELECTRICAL LEVEL: CERTIFICATE ONE A. INTRODUCTION MOTOR VEHICLE ELETRICAL CERTIFICATE
Activity 3: Electricity
Name Section Activity 3: Electricity 3.1 Electric Charge, Voltage and Energy 1) Electric charge Your instructor will demonstrate a Wimshurst machine, which separates electric charge. a) Describe what happens
AUTO 140A: VEHICLE MAINTENANCE
AUTO 140A: Vehicle Maintenance 1 AUTO 140A: VEHICLE MAINTENANCE Discipline AUTO - Automotive Technology Course Number 140A Course Title Vehicle Maintenance Catalog Course Description Intended for the incumbent
Electrical Controls. Syllabus
Instructor: Jeremie Hedges (757)651-1007 Contact Hours: 72 hours Prerequisites: None Electrical Controls Syllabus Course Description: This course is designed to present a blend of electrical theory and
Lighting Tables for New Equipment 2/24/2015
T8 and SUPER T8 Fluorescent Lamps and Fixtures with Electronic Ballasts LENGTH DESCRIPTION OF WATTS 2' F17T8 1 18 206 11.00 --- --- 2 32 207 11.00 --- --- 3 48 208 18.00 --- --- 4 57 209 18.00 --- ---
Electrical Measuring Instruments
UNIT 12 Electrical Measuring Instruments Learning Objectives After studying this unit, the student will be able Understand different measuring instruments used in electricity Understand the working of
SQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
SAMPLE ASSESSMENT OUTLINE AUTOMOTIVE ENGINEERING AND TECHNOLOGY GENERAL YEAR 11
SAMPLE ASSESSMENT OUTLINE AUTOMOTIVE ENGINEERING AND TECHNOLOGY GENERAL YEAR 11 Copyright School Curriculum and Standards Authority, 2014 This document apart from any third party copyright material contained
Course Outcome Summary
Course Information Division: ASET Contact Hours: 90 Theory: 30 Lab Hours: 60 Total Credits 4 Prerequisites ELEC 125 (Fundamentals of Electricity) Course Description This course is designed to provide students
Lighting Tables for New Equipment 3/9/2016
T8 and SUPER T8 Fluorescent Lamps and Fixtures with Electronic Ballasts (Fixtures or lamps with integrated occupancy sensors may be eligible for an additional sensor rebate - see page 7) LENGTH DESCRIPTION
AUTOMOTIVE TECHNOLOGY (AUTO)
Automotive Technology (AUTO) 1 AUTOMOTIVE TECHNOLOGY (AUTO) AUTO 100 Automotive Technology and Maintenance for the Consumer 3 Units (AA/AS; CSU) 54 lecture hours, 18 lab hours Intended for non-majors.
Electrical power. Objectives. Assessment. Assessment. Equations. Physics terms 5/27/14
Electrical power Objectives Use the equation for electrical power to solve circuit problems. Understand basic concepts for home electricity usage and wiring. Calculate the power used by electric circuit
NZQA registered unit standard version 1 Page 1 of 6
Page 1 of 6 Title Demonstrate knowledge of theory and legislation for registration of electrical appliance servicepersons Level 3 Credits 3 Purpose This unit standard covers the theory assessment required
ELECTRICAL TECHNOLOGY 3 March 2008
I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the
Youth Guarantee Courses 2019 National Certificates at levels 2 and 3
EDUCATIONAL SERVICES LTD Driving your career forward Youth Guarantee Courses 019 National Certificates at levels and 3 Zero fees apply for all Youth Guarantee learners Open to learners 16-19 years Travel
Circuit Concepts (Residential)
Youth Explore Trades Skills Circuit Concepts (Residential) Description This Activity Plan will allow students to understand how electrical circuits work in a home. Students will also gain knowledge of
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON COURSE OUTLINE COURSE TITLE: ELECTRICAL, ELECTRONICS & FUELS : SEMESTER: 32 Week Program PROGRAM: MOTOR VEHICLE MECHANIC PRE-APPRENTICE
Lighting Tables for Existing/Base Equipment 1/1/2014
T12 Fluorescent Lamps and Fixtures LENGTH Lighting Tables for Existing/Base Equipment OF CODE WATTS LENGTH OF CODE WATTS 2' F20T12 1 8000 28 5 F60T12 1 8029 100 2 8001 46 2 8030 135 3 8002 68 F60T12 HO
AG. 225 AGRICULTURAL SYSTEMS/ELECTRICITY AND HYDRAULICS
AG. 225 AGRICULTURAL SYSTEMS/ELECTRICITY AND HYDRAULICS COURSE DESCRIPTION: A course designed to develop skills in operation of tools and equipment, wiring, controls, electric motors, and hydraulics. UNITS
Higher National Unit Specification. General information for centres. Electrical Motors and Motor Starting. Unit code: DV9M 34
Higher National Unit Specification General information for centres Unit title: Electrical Motors and Motor Starting Unit code: DV9M 34 Unit purpose: This Unit has been developed to provide candidates with
Wind Energy Technologies
Wind Energy Technologies Wind Energy Technician This Green Collar Zone workstation will teach you the basic principles of wind power, as you acquire skills by performing hands-on activities. No prior knowledge
Electrical and Power Transmission Installers, Other CIP Task Grid. Secondary Competency Task List. Level 1 Level 2 Level 3
1 100 BASIC SAFETY 101 Demonstrate proper use of personal protective equipment. 5 102 Identify causes of job site accidents. 5 103 Identify job site hazards. 5 104 Working safely with job hazards. 5 105
Industrial Maintenance Technology Student Learning Outcomes
Industrial Maintenance Technology Student Learning Outcomes February, 2017 ~ f ) FDTC Curriculum Map Program: Industrial Maintenance Technology Course# Course Title Credits Hours Lecture Lab Program Outcomes
Course name: ELECTRICAL SKILLS 1. Short name:
ELECTRICAL SKILLS 1 ES1 240 hrs Prerequisites: Working skills in four-function math including whole numbers, signed numbers, decimals and knowledge of Algebra and right angle Trigonometry. (Remediation
Reavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I
Reavis High School Curriculum Snapshot/Cover Page for Auto Mechanics I Unit 1: Safety in the Automotive Shop 8 # of The student will learn general safety in the Automotive Shop. The student will also learn
NATIONAL CERTIFICATE (VOCATIONAL) ELECTRICAL SYSTEMS AND CONSTRUCTION NQF LEVEL 2 NOVEMBER 2009
NATIONAL CERTIFICATE (VOCATIONAL) ELECTRICAL SYSTEMS AND CONSTRUCTION NQF LEVEL 2 NOVEMBER 2009 (12041032) 12 November (X-Paper) 09:00 12:00 This question paper consists of 6 pages. (12041032) -2- NC710(E)(N12)V
ecognition of Prior Learning (RPL)
ecognition of Prior Learning (RPL) EVIDENCE GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Evidence Guide inspect and lubricate an automotive system Page 1 of 15 National Certificate in Professional
LED Strip Light - LED Rail Light Inch LED - 4 Watts Lumen V DC
LED Strip Light - LED Rail Light - 5.9 Inch LED - 4 Watts - 145 Lumen - 10-30V DC Part #: LEDST-5 Page: 1 Buy American Compliant The LEDST-5 LED Strip Light is designed as an extremely efficient and versatile
HVACR Electrical Systems
HVACR Electrical Systems to The following HVAC Excellence competencies (rev. 2007) are covered in this publication. Only the covered compentencies are listed. The first column identifies the competency
Lighting Tables for New Equipment 1/1/2018
T8 and SUPER T8 Fluorescent Lamps and Fixtures with Electronic Ballasts - REBATES are 50% of fixture/lamp cost, up to maximum amounts shown below LAMP LENGTH DESCRIPTION OF WATTS 2' F17T8 1 18 206 11.00
COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: COURSE CODE: 15EE42 SEMESTER: IV TOTA
COURSE: Power Generation and Economics DEPARTMENT: Electrical and Electronics Engineering ACADEMIC YEAR: 2016-17 COURSE CODE: 15EE42 SEMESTER: IV TOTAL CONTACT HOURS: 50 hrs. DURATION OF IA: 1 hr. IA MARKS:
Higher National Unit Specification. General information for centres. Electrical Motor Drive Systems. Unit code: DN4K 35
Higher National Unit Specification General information for centres Unit code: DN4K 35 Unit purpose: This Unit has been designed to allow candidates to develop a knowledge and understanding of electrical
Overcurrent protection
Overcurrent protection This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
Total duration of course = 3 Months (12 weeks) Total training hours = 400 hrs.
1 TRAINING OBJECTIVES: In order to reduce the unemployment and poverty in the society, the curriculum is designed to impart the technical knowledge and skill to those who are literate and.can not do the
Chapter Assessment Use with Chapter 22.
Date Period 22 Use with Chapter 22. Current Electricity Understanding Concepts Part A Use each of the following terms once to complete the statements below. ampere electric current potential difference
NZQA registered unit standard version 3 Page 1 of 5. Demonstrate and apply knowledge of electrical machines
Page 1 of 5 Title Demonstrate and apply knowledge of electrical machines Level 5 Credits 15 Purpose This unit standard covers knowledge and the application of d.c. and a.c. electrical machines for engineers.
Sylvania Automotive Light Bulb Reference Guide
Sylvania Automotive Light Bulb Reference Guide If searching for the book Sylvania automotive light bulb reference guide in pdf format, then you've come to correct site. We furnish full release of this
Model Curriculum. Assistant Electrician (NSQF Level 3) SECTOR: SUB-SECTOR:
Model Curriculum Assistant Electrician (NSQF Level 3) SECTOR: SUB-SECTOR: OCCUPATION: REF. ID: NSQF LEVEL: CONSTRUCTION REAL ESTATE AND INFRASTRUCTURE CONSTRUCTION CONSTRUCTION ELECTRICAL WORKS CON/Q0602
A/C Generator Systems
A/C Generator Systems What is the function of the charging system? Provide power for all electrical loads Recharge the starting battery What happens if the charging systems puts out too much power? Voltage
First Revision of Sheet No P.S.C.U. No. 50 Canceling Original Sheet No ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO.
First Revision of Sheet No. 11.1 P.S.C.U. No. 50 Canceling Original Sheet No. 11.1 ROCKY MOUNTAIN POWER ELECTRIC SERVICE SCHEDULE NO. 11 STATE OF UTAH Street Lighting Company-Owned System AVAILABILITY:
APPLIED MECHANICS 40/50
APPLIED MECHANICS 40/50 Description (Combined Course- 2 periods) Applied Mechanics 40 introduces students to automobile servicing and the maintenance/repair field. Work is performed on operational vehicles.
Automotive Technology
It is the mission of the Automotive Department of Victor Valley Community College to provide quality automotive instruction to a diverse community of students; the array of courses offered shall serve
EL PASO ELECTRIC COMPANY SCHEDULE NO. 08A GOVERNMENTAL STREET LIGHTING AND SIGNAL SERVICE RATE (CITIES)
APPLICABILITY This rate is available to any village, town, city, county, state of Texas and Federal facilities for street light, freeway lighting and for traffic signal lights. TERRITORY Municipal limits
STRANDS AND STANDARDS
STRANDS AND STANDARDS BASIC AUTOMOTIVE COLLISION REPAIR Course Description This course is the first in a sequence of courses that prepares individuals in repair and refinishing of uni-bodies and fenders
Physics Experiment 9 Ohm s Law
Fig. 9-1 Simple Series Circuit Equipment: Universal Circuit Board Power Supply 2 DMM's (Digital Multi-Meters) with Leads 150- Resistor 330- Resistor 560- Resistor Unknown Resistor Miniature Light Bulb
Single-Phase Meter Components
Single-Phase Meter Components S T U D E N T M A N U A L March 2, 2005 2 STUDENT TRAINING MANUAL Prerequisites: None Objectives: From memory, you will be able to explain the parts and function of a single-phase
EL PASO ELECTRIC COMPANY SCHEDULE NO. 08 GOVERNMENTAL STREET LIGHTING SERVICE RATE
APPLICABILITY This rate schedule is available to any village, town, city, county, state of Texas and Federal facility for street lighting and freeway lighting service. TERRITORY Texas Service Area MONTHLY
IAE-101: Electrical Fundamentals for Non-Electrical Personnel
IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone
QCF level: 4 Credit value: 15
Unit 63: Electrical Power Unit code: H/601/1408 QCF level: 4 Credit value: 15 Aim This unit will develop learners understanding of electrical power systems and power distribution and the advantages and
Automotive Technology. Resources
Automotive Technology Resources Automotive Technology: A Systems Approach Third Canadian Edition Jack Erjavec, Martin Restoule, Stephen Leroux, Rob Thompson 9780176531522 Advancing technology continues
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. COURSE CURRICULUM COURSE TITLE: UTILIZATION OF ELECTRICAL ENERGY (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT COURSE CURRICULUM COURSE TITLE: UTILIZATION OF ELECTRICAL ENERGY (Code: 3340903) Diploma Programme in which this course is offered Electrical Engineering
National Certificate in Motor Industry (Automotive Machining)
NZQF NQ Ref 0371 Version 6 Page 1 of 11 National Certificate in Motor Industry (Automotive Machining) Level 4 Credits 167 This qualification has been reviewed. The last date to meet the requirements is
SECTION 3 BASIC AUTOMATIC CONTROLS UNIT 15 Troubleshooting Basic Controls
SECTION 3 BASIC AUTOMATIC CONTROLS UNIT 15 Troubleshooting Basic Controls UNIT OBJECTIVES After studying this unit, the reader should be able to Describe and identify power- and non-power-consuming Describe
Write the term that correctly completes the statement. Use each term once. ampere. electric current. resistor battery.
Date Period Name CHAPTER 22 Study Guide Current Electricity Vocabulary Review Write the term that correctly completes the statement. Use each term once. ampere electric current resistor battery kilowatt-hour
National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans
NZQF NQ Ref 0413 Version 6 Page 1 of 13 National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans Level 4 Credits
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. AUTOMOBILE ELECTRICAL SYSTEM (Code: )
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum AUTOMOBILE ELECTRICAL SYSTEM (Code: 3330203) Diploma Programme in which this course is offered Semester in which offered 3 rd Semester
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief
Heavy vehicle service and maintenance technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering
DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ELECTRICAL AND ELECTRONICS ENGINEERING III YEAR M SCHEME V SEMESTER.
DIRECTORATE OF TECHNICAL EDUCATION DIPLOMA IN ELECTRICAL AND ELECTRONICS ENGINEERING III YEAR M SCHEME V SEMESTER 2015 2016 onwards ELECTRICAL ESTIMATION AND ENERGY AUDITING CURRICULUM DEVELOPMENT CENTRE
AUTO ELECTRICAL WORK
1. PREAMBLE AUTO ELECTRICAL WORK This examination syllabus has been evolved from the Senior Secondary School Trade Curriculum. The examination syllabus does not replace the curriculum. The syllabus has
AUTO 121 Auto Electrical I Fall Section J01 3 credits
UAS Automotive Technology Course Syllabus AUTO 121 Auto Electrical I Fall 2012 - Section J01 3 credits Instructor: Tony Martin Phone: 796-6126 (office) or 796-2034 (home) Email: tony.martin@uas.alaska.edu
Replace ** for the required coil voltage eg: P7 (230V 50/60Hz) Co nt act or Heating Guides, 9-95A
Co nt act or Heating Guides, 9-95A switching in the event of prolonged overloads at 1.05 Un. 220 / 240V 380 / 415V 660 / 690V 4 7 12 D1210** 2 Pole 5 9 15.5 D1810** 6 11 19 D2510** 8.5 15 25.5 D3210**
Electromagnetism - Invisible Forces
Science Unit: Lesson 6: Physics Ideas Electromagnetism - Invisible Forces School year: 2006/2007 Developed for: Developed by: Grade level: Duration of lesson: Notes: Tecumseh Elementary School, Vancouver
Basic voltmeter use. Resources and methods for learning about these subjects (list a few here, in preparation for your research):
Basic voltmeter use This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
COASTAL BEND COLLEGE AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012)
COASTAL BEND COLLEGE AUTOMOTIVE TECHNOLOGY SYLLABUS (rev. Fall 2012) AUMT 1310: Automotive Brake Systems SEMESTER HOURS: 3 TEXTBOOK Automotive Technology A systems Approach COURSE DESCRIPTION; Operation
IntermodalMechanics.com
IntermodalMechanics.com IntermodalMechanics.com What is IMTI? INTERMODAL MECHANIC TRAINING INSTITUTE Provider of specialized training serving the freight transportation industry with primary focus on intermodal
Train Examination (Braking System) Addendum. Lesson Plan and WorkBook
Train Examination (Braking System) Addendum Lesson Plan and WorkBook (Generic Version) Version 1 June, 2011 IMPORTANT NOTICE This booklet is one of a series of generic training and assessment templates
Job Ready Assessment Blueprint. Diesel Technology. Test Code: 4127 / Version: 01. Copyright All Rights Reserved.
Job Ready Assessment Blueprint Diesel Technology Test Code: 4127 / Version: 01 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written
Hunter Alignment. This alignment education series also helps prepare technicians for the ASE A4 Certification.
Hunter Alignment Hunter offers entry and intermediate level alignment courses throughout the county. The combination of discussion and hands-on lab/shop activities melds theory with reality. This alignment
Amount (Rs) 1.5 sq. mm ISI marked, FR
BILL OF QUANTITY FOR ELECTRICAL WORK AT ESI REGIONAL OFFICE, STAFF QUARTERS, SEC-16 AND ASSOCIATED BRANCH OFFICE AND DISPENSARY. Part-II Sr. no SOR No. Details of Items Unit Quantity Rate (Rs) Amount (Rs)
2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8
2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8 Tel. (902) 368-4600 Fax. (902) 368-4622 http://www.gov.pe.ca/eecd/
Name: Base your answer to the question on the information below and on your knowledge of physics.
Name: Figure 1 Base your answer to the question on the information below and on your knowledge of physics. A student constructed a series circuit consisting of a 12.0-volt battery, a 10.0-ohm lamp, and
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES
STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: ELT 110 2005-1 Identifier is the postsecondary course prefix followed by Plan-of-Instruction version
Automotive Service and Technology
146 Automotive Service Degrees and Certificates Associate in Science Degree: Automotive Service Certificate of Achievement: Automotive Service Program Description The automotive industry has long recognized
Unit AE01K Knowledge of Locating and Correcting Simple Electrical Faults in the Automotive Workplace
Assessment Requirements Unit AE01K Knowledge of Locating and Correcting Simple Electrical Faults in the Automotive Workplace Content: Basic electrical principles a. Explain the direction of current flow
Since March Right on Target
Since 1940 RECIPES EVENTS LANDSCAPING March 2017 Right on Target PLUGGED IN You re invited to Taylor Electric s 81 st Annual Meeting Taylor Electric Cooperative s 81st annual meeting will be held at the
SYSTEMS AND TECHNOLOGY
Victorian Certificate of Education 2006 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words SYSTEMS AND TECHNOLOGY Written examination Friday 10 November 2006 Reading time: 9.00
University of Jordan School of Engineering Electrical Engineering Department. EE 219 Electrical Circuits Lab
University of Jordan School of Engineering Electrical Engineering Department EE 219 Electrical Circuits Lab EXPERIMENT 10 HOME WIRING BASICS Prepared by: Dr. Mohammed Hawa EXPERIMENT 10 HOME WIRING BASICS
Academic Course Description
BEE305- ELECTRICAL MACHINES Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE305- ELECTRICAL MACHINES Third Semester,
Model Curriculum. Solar Lighting Technician (Options: Home Lighting System/ Street Lights)
Model Curriculum Solar Lighting Technician (Options: Home Lighting System/ Street Lights) SECTOR: SUB-SECTOR: OCCUPATION: REF ID: NSQF LEVEL: GREEN JOBS RENEWABLE ENERGY ASSEMBLY AND REPAIR SGJ/Q0201,
LEVEL 1/2 CAMBRIDGE NATIONAL AWARD/CERTIFICATE IN PRINCIPLES IN ENGINEERING AND ENGINEERING BUSINESS. Candidate Surname
SPECIMEN LEVEL 1/2 CAMBRIDGE NATIONAL AWARD/CERTIFICATE IN PRINCIPLES IN ENGINEERING AND ENGINEERING BUSINESS R101: Engineering Principles Candidates answer on the Question Paper OCR Supplied Materials: