Defense Grade Low-side and Highside Drivers / Switches. RobuST
|
|
- Kory Briggs
- 5 years ago
- Views:
Transcription
1 Defense Grade Low-side and Highside Drivers / Switches RobuST
2 Candidate RobuST Product Offering 2 What is the difference between an Active RobuST device and a Candidate RobuST device? In addition to the active RobuST products listed on st.com, ST will evaluate the release of candidate RobuST devices based on your needs This guide contains both Active & Candidate RobuST devices. Candidate devices in this guide are in BOLD and will link to the commercial / industrial / automotive equivalent datasheet. Please see Candidate RobuST products listed in this document and contact ST Sales to submit a reuest form for your specific needs
3 What is the RobuST Product Offering? 3 What is a RobuST device? dedicated traceability and part marking production parts approval documents available adapted extended life time and obsolescence management extended product change notification (PCN) process designed and manufactured to meet sub ppm quality goals advanced mold and frame designs for superior resilience to harsh environment (acceleration, EMI, thermal, humidity) RobuST products are offered as standard as RobuST level C, extended screening to level A or B may be available on request
4 COTS Products COTS for A&D Product for A&D COTS What is RobuST? A&D COTS Products 4 Commercial / Industrial / Automotive Grade -40 C to +85/125 C Standard Datasheet HE : Harsh Environment RobuST ST Commercial & Industrial product Fully Available without restrictions RobuST products are intended to provide an affordable solution for volume Aerospace & Defense applications when use of standard products and processes is not possible and HIREL / Rad Hard products provided in ceramic packages may contain unnecessary features and related costs
5 What is RobuST? A&D Product Grade 5
6 RobuST Low Side Drivers/Switches
7 Low Side Switches 7 5V/3.3V DC 12V VIPower OmniFET III R ST VS Drain Load Protected power switching on the Low Side between the load and ground mc R R IN Status Gate Drive Protection Diagnostic Logic ICC Source Application Segments: Load Management LED and General Lighting Motor Control DC 12/24V Applications: Resistive Loads such as Heaters Inductive Loads such as Relays LED Illumination DC Motor Control PWM 12/24V Portable Electronics DC 12V/24V Resistive, Inductive, and Capacitive Loads
8 Fully Protected Low Side Switches 8 New OmniFET III features 5-Pin Devices DRAIN External supply pin Low current consumption from battery in OFF-state Enhanced short-circuit robustness Current and Power Limitation Separate Status Pin ON and OFF state diagnostics SUPPLY INPUT Undervoltage Logic Control Thermal Sensoring Overvoltage Clamp Current/ Power Limiter STATUS General Features 41V MIN CLAMP VOLTAGE LINEAR CURRENT LIMITATION 3V COMPATIBLE INPUT THERMAL SHUT DOWN SHORT CIRCUIT PROTECTION OVER TEMPERATURE PROTECTION INTEGRATED CLAMP DIAGNOSTIC FEEDBACK ESD PROTECTION COMPATIBLE WITH LOGIC LEVEL STANDARD POWER MOSFET (3 PIN CONFIGURATION) 3-Pin Devices Undervoltage Logic INPUT Control Thermal Sensoring Overvoltage Clamp Current/ Power Limiter SOURCE DRAIN SOT-223 SO8 Double Pad Power SSO12 Pin Compatible with Power MOS SOURCE
9 Low Side Drivers/Switches 9 Part Number Package Plating Technology Temp. range Tj (ºC) min max Clamp Voltage typ (V) Drain Current Limit type (A) RDS(on) max (mω) Number of Channels nominal Digital status RVNB14NV04TR D2PAK Matte Tin M RVNB35N07TR D2PAK Matte Tin M RVNB35NV04TR D2PAK Matte Tin M RVND14NV04TR TO 252 DPAK Matte Tin M RVNL5050S5TR SO-8 NiPdAu M RVNL5090S5TR SO-8 NiPdAu M RVNL5160S5TR SO-8 NiPdAu M RVNL5300S5TR SO-8 NiPdAu M RVNLD5300TR SO-8 NiPdAu M RVNS1NV04PTR SO-8 NiPdAu M RVNS3NV04DPTR SO-8 NiPdAu M RVNS7NV04PTR SO-8 NiPdAu M
10 RobuST High Side Drivers/Switches
11 Smart Power for High Side Switches VIPower M0-5x 11 Overview Voltage ratings ranging from 4.5V to 58V multi-channel configurations (1, 2, & 4ch) RDS(ON) values from 4 to 250mΩ analog or digital load diagnostics thermally efficient packages Use Cases Load Management Resistive Loads Inductive Loads Capacitive Loads LED Illumination DC Power Switching for Peripheral Electronics DC Motor Control Battery Management HIGH Side Switches + 5V DC 12/24V RIN INPUT Vcc SCB ICC mc RS T Status Sense ISENSE Logic + Driver GND OUT Load VSENSE RSENSE RGND DGN D SCG
12 VIPower M0-7 Product Family: 12 Technology Roadmap Key features and real benefits M0-1 PowerSO-10 R (on) = 50mΩ Full Production M0-3 M0-2 PowerSO-10 R (on) = 20mΩ PowerSO-10 R (on) = 10mΩ M0-5 PowerSO-10 R (on) = 6mΩ R (on) = 3.6mΩ M0-6 PowerSO-10 R (on) = 3.6mΩ Hybrid Architecture M0-7 PowerSO-10 R (on) = 4mΩ R (on) = 2.5mΩ Superior Robustness & Reliability Through: Power Limitation Flexible Latch-Off Functionality Multi-sense diagnostic for Enhanced System Safety, thanks to: Temperature Monitoring Vcc Monitoring Output Current Sensing Full ON- and OFF-state Diagnostics Capability Bulb / LED mode Reverse Polarity Protection (for Hybrid Architecture) Optimized EMI Performance through Enhanced Gate Driver Concept Low Quiescent Current
13 Single - Single Dual - Dual M0-7 Family values 13 The best solution for interior and exterior Lighting (Full load coverage ) 4mW 7mW 10mW 16mW 20mW 30mW 40mW 50mW 140mW R ON Output Power High Power Xenon Underhood HB / LB / FOG 59W (2x27W + 5W) 47W (2x21W + 5W) 32W (27W + 5W) 27W/21W 1A - 2A LED 5W / 6W / 10W / 12W 0.2A - 1A LED with total flexibility PSSO-16: all in one package SO-8: Cost optim d OCTAPAK Hi-Power INPUT0 FaultRST OUT0 OUT0 INPUT0 FaultRST OUT0 OUT0 SEn GND SEL0 SEL1 MultiSense N.C PSSO-16 Single VCC OUT0 OUT0 N.C. N.C. N.C. N.C. SEn GND SEL0 SEL1 MultiSense INPUT PSSO-16 Dual VCC OUT0 OUT0 OUT1 OUT1 OUT1 OUT1 RVN7010AJ RVN7016AJ RVN7020AJ RVN7040AJ RVN7050AJ RVN7140AJ Single - Dual RVND7020AJ RVND7030AJ RVND7040AJ RVND7050AJ RVND7140AJ RVN7040AS RVN7050AS RVN7140AS RVN7007AH RVN7004AH
14 RobuST High Side Switches 14 Part Number Package Plating Technology Supply Voltage (Vdd) Temp. range Tj (ºC) min (V) max (V) min max Max onstate resistance Ron(mΩ) Drain Current limit typ (A) Absolute max supply voltage (V) Number of Channels nominal Digital status Current sense RVN5010AKTR PowerSSO24 Matte Tin M RVN5016AJTR PowerSSO12 Matte Tin M RVN5050AJTR PowerSSO12 Matte Tin M RVN5E006ASPTR PowerSO-10 Matte Tin M0-5Enhanced RVN5E010MHTR TO-252 6L Matte Tin M0-5 Enhanced (MVers.) RVND5004ASP30TR RVND5004ATR SO- 30MultiPower QFPN PW 24lead Matte Tin M Matte Tin M RVND5050AJTR PowerSSO12 Matte Tin M RVND5160AJTR PowerSSO12 Matte Tin M RVND5160JTR PowerSSO12 Matte Tin M RVND5E006ASPTR PowerSO16 Matte Tin M0-5 Enhanced RVND5E008MYTR PWSSO36 Matte Tin M0-5 Enhanced (MVers.) RVND5E012AYTR PWSSO36 Matte Tin M0-5 Enhanced RVND5E025AKTR PowerSSO24 Matte Tin M0-5 Enhanced RVND5E025MKTR PowerSSO24 Matte Tin M0-5 Enhanced (MVers.)
15 RobuST High Side Switches 15 Part Number Package Plating Technology Supply Voltage (Vdd) min (V) max (V) Temp. range Tj (ºC) min max Max on-state resistance Ron(mΩ) Drain Current limit (Ilim) typ (A) Absolute max supply voltage (V) Number of Channels nominal Digital status Current sense RVND5E160AJTR PowerSSO12 Matte Tin M0-5 Enhanced RVND5E160JTR PowerSSO12 Matte Tin M0-5 Enhanced RVND5E160MJTR PowerSSO12 Matte Tin M0-5 Enhanced (MVers.) RVNQ5027AKTR PowerSSO24 Matte Tin M RVNQ5160KTR PowerSSO24 Matte Tin M RVNQ5E050KTR PowerSSO24 Matte Tin M0-5 Enhanced RVNQ5E160AKTR PowerSSO24 Matte Tin M0-5 Enhanced RVNQ5E160MKTR PowerSSO24 Matte Tin M0-5 Enhanced (MVers.) RVNQ5E250AJTR PowerSSO16 Matte Tin M0-5 Enhanced
16 VIPower M05T: Product Portfolio for 24V Systems Optimized solutions covering broad range applications Key features and benefits 16 6mΩ < 100W 16mΩ 75W 35mΩ 55W 50mΩ 42W 100mΩ 21W 100mΩ( L version) 50 mω( L version) 35mΩ( L version) LED (50mA -100mA) Operating Voltage Range: 8V 36V Jump Start Voltage Capability (48V) Clamping Voltage: >58V Enhanced Energy Capability Extreme low Stand By Current Programmable Latch-off Product Portfolio Diagnostic Features Proportional Load Current Sense Off State Open Load Detection Output Short to Vcc Detection Very Low Current Sense Leakage Device Number of Channel Ron [mohm] Package RVN5T006ASP 1 6 PowerSO-10 RVN5T016AH 1 16 HPAK RVND5T016ASP 2 16 PowerSO-16 RVND5T035AK 2 35 PowerSSO-24 RVND5T035LAK (LED) 2 35 PowerSSO-24 RVND5T050AK 2 50 PowerSSO-24 RVND5T100AJ PowerSSO-12 RVND5T100LAJ (LED) PowerSSO-13 Protections Overload and Short to Ground (with and w/o Latch-off) Thermal Shutdown (with and w/o Latch-off) Under-voltage Shutdown Over-voltage Clamp Load Current Limitation Self-limiting of Fast Thermal Transients (Power Limitation ST IP) Protection against Loss of Ground and Loss of Vcc Reverse Battery Protection (Hybrid) Electrostatic Discharge Protection
17 RobuST High Side Switches 17 For 24V Applications Part Number Package Plating Technolog y Temp. range Tj (ºC) min max min (V) Supply Voltage (V cc ) Absolute max (V) max supply voltage (V) Max on-state resistance R on (mω) Drain Current limit (I lim ) typ (A) Current sense RVND5T016ASPTR PowerSSO-16 Matte Tin MO-5T RVN5T016AHTR TO-252 (HPAK) Matte Tin MO-5T RVN5T006ASPTR PowerSSO-10 Matte Tin MO-5T
18 RobuST Configurable Drivers/Switches
19 RL9733 Octal driver with SPI 3 channels with direct drive 19 Highly Flexible device, allowing to set the output channels either as High Side Drive or Low Side Drive The output pins configuration may be self-configurable (depending by the load applied) or externally configurable via SPI pins Motors Relays LEDs Bulb Load Resistive Capacitive Inductive Full channel control with Pin Fully flexible channel usage (HSD/LSD)
20 Configurable High/Low Side Switches 20 Part Number Package Plati ng Technolog y min Temp. range Tj (ºC) max Clamping Voltage (V) Driver stages On-state resistance R on (mω) Current limitation (I lim ) typ (A) Max supply voltage V cc (V) RL9733XP/XPTR PowerSSO-28 Matte Tin BCD x powermos RL99MC6TR PowerSSO-16 Matte Tin BCD4s
PROFET + Benchmark Robustness and Diagnostics in Modular Packages
PROFET + Benchmark Robustness and Diagnostics in Modular Packages www.infineon.com/profet Introduction Infineon launches its next generation of discrete smart high-side switches PROFET +. The family is
More informationSC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications
Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver
More information800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display
800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationStandalone Linear Li-Ion Battery Charger with Thermal Regulation
HM4056 Standalone Linear Li-Ion Battery Charger with Thermal Regulation FEATURES DESCRIPTION Programmable Charge Current up to 1A No MOSFET, Sense Resistor or Blocking Diode Required Constant-Current/Constant-Voltage
More informationSmart power solutions for car body applications
Smart power solutions for car body applications www.st.com/automotive Order code: SGCAR1013 STMicroelectronics - October 2013 - Printed in United Kingdom - All rights reserved The STMicroelectronics corporate
More informationClassic PROFET TM July 2017
Classic PROFET TM July 2017 Christoph Igelbrink (IFAG ATV BP LI PM) restricted Agenda 1 Classic PROFETs Introduction and portfolio 2 USP s and advantages 3 Products for 24V applications 4 Application examples
More information800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery
800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion
More informationME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054
Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT Standalone Linear Li-Ion Battery Charger in ThinSOT -4.2V DESCRIPTION is a constant-current/constant-voltage linear charger for
More informationOIS21C. Optical smart sensor for hydraulic cylinders. General Description. Features. Applications. Pin Functions. Ordering Information
Optical smart sensor for hydraulic cylinders General Description OIS21C is a patented smart optical device, which is usually combined with a hydraulic steering cylinder. The main application is on rough
More informationFully integrated constant current/constant voltage Li-ion battery charger
Description The ACE4054 is a single cell, fully integrated constant current (CC) / constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More information800mA Linear Li-Ion Battery Charger
800mA Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its package and low external component
More informationPackage: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF
FEATURES Programmable Charge Current Up to 8mA No MOSFET, Sense Resistor or Blocking Diode Required Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging Thermal Regulation
More informationReach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters
Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters John Bazinet Staff Scientist Power Products David Loconto Design Center Manager Power Products Steve Knoth Senior
More information800mA Lithium Ion Battery Linear Charger
GENERAL DESCRIPTION is a complete CC/CV linear charger for single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is needed and
More informationVS6102 Standalone Linear Lithium Battery Charger
General Description VS6102 is a complete constant-current & constant voltage linear charger for single cell lithium-ion batteries. Its SOT-23 package and low external component count make VS6102 ideally
More informationCOTAG GENERAL DESCRIPTION
GENERAL DESCRIPTION The YF8036 is a highly integrated Li-ion battery linear charging management device targeted at space limited portable applications. The YF8036 offers an integrated MOSFET and current
More information800mA Lithium Ion Battery Linear Charger
800mA Lithium Ion Battery Linear Charger General Description is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Furthermore the is specifically designed
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More information2A Switch-Mode Li-Ion Battery Charger
2A Switch-Mode Li-Ion Battery Charger General Description The is a highly integrated switch-mode Li-Ion Battery Charger. With few external components, is well suited for a wide range of portable applications.
More information2 cell Li-ion Battery Charge from 3V~12V
2 cell Li-ion Battery Charge from 3V~12V General Description The is a complete constant-current/ constant voltage switching charger for multi cell lithium-ion batteries. Boost+Linear charger work with
More informationDIO5518D 300mA,Single Li-ion Battery Charger
300mA,Single Li-ion Battery Charger Rev.0 Features Programmable Charge Current Up to 300mA Over-Temperature Protection Under oltage Lockout Protection Over oltage Lockout Protection Reverse current protection
More informationDIO5538B 5~100mA,Single Li-ion Battery Charger
5~100mA,Single Li-ion Battery Charger Rev 1.1 Features Broad Programmable Charging Current: 5~100mA Over-Temperature Protection Under Voltage Lockout Protection Reverse current protection between BAT and
More informationPT1054 Lithium Ion Battery Linear Charger
GENERAL DESCRIPTION PT1054 is a complete CC/CV linear charger f or single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is
More informationBody Smart Power. Intelligent Power & Body Smart Power Division
Body Smart Power Intelligent Power & Body Smart Power Division Body Smart Power CAN / LIN Transceiver Voltage Regulators Instrumentation SBC Windows Lift otor Drivers Voltage Regulators Device that have
More informationEnhanced Diagnostic and Protection of Motor Drivers to Assist Robust System Development. Ryan Kehr Application Manager TI Motor Drive
Enhanced Diagnostic and Protection of Motor Drivers to Assist Robust System Development Ryan Kehr Application Manager TI Motor Drive 1 Ryan Kehr Application Manager - TI Motor Drive Career BS in Electrical
More information500mA Standalone Linear Li-Ion Battery Charger. Features
500mA Standalone Linear LiIon Battery Charger General Description The is a complete constantcurrent/constant voltage linear charger for single cell lithium ion batteries. Its SOT235 package and low external
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external
More informationFEATURES. Charging. - High Voltage Chemistry Support: up to 4.35V. Others
HM5B GENERAL DESCRIPTION The HM5B series of devices are highly integrated Li-Ion and Li-Pol linear chargers targeted at small capacity battery for portable applications. It is a complete constant-current/
More information500mA Linear Li-Ion Battery Charger in SOT23
500mA Linear Li-Ion Battery Charger in SOT23 General Description The is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, is well suited for a wide
More information2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count
.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP DESCRIPTION ETA6 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,
More informationACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge
Description The ACE4054C is a single cell, fully integrated constant current (CC)/ constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIC1MO120E0160 1200 N-channel, Enhancement-mode SiC MOSFET RoHS Pb Product Summary Characteristics alue Unit DS 1200 Typical R DS(ON) 160 mω I D ( T C 100 C) 14 A Circuit Diagram TO-247-3L Features *
More informationDT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant
More informationHF Series Incremental Magnetic Encoder Decade Count High Resolution Kit
HF Series Incremental ic Encoder Features and Benefits ic technology offers robust performance. 100% Non-contacting design (no bearings or bushing) provides an extremely long life expectancy and is tolerant
More informationCE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:
Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.
More informationBattery Equalizers & Converters
Equalizers Converters Stock No. Sure Power P/N Input Voltage Output Voltage Output Current Stock No. Sure Power P/N Input Voltage Output Voltage Output Current 80098 12025E00 12V DC 24V DC 40 amps 80114
More informationBattery Equalizers. UNCONTROLLED DOCUMENT Updated 6/01/11. Sure Power P/N. Output Current E00 60 amps. Stock No E00 80 amps
Output Current 60 amps 80 amps 100 amps Overview In dual battery (24V systems) it is often desirable to have 12V power available. Often this 12V power is available by tapping the battery stack at the junction
More information1A is compatible with the USB interface, linear battery management chip
1A is compatible with the USB interface, linear battery management chip General Description The is a constant- current / constant- voltage charger circuit for single cell lithium-ion batteries. The device
More information300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
More information5A Synchronous Buck Li-ion Charger With Adapter Adaptive
5A Synchronous Buck Li-ion Charger With Adapter Adaptive General Description The is a 5A Li-Ion battery charger intended for 4.4~14 wall adapters. It utilizes a high efficiency synchronous buck converter
More informationST3S01PHD BATTERY CHARGE I.C.
BATTERY CHARGE I.C. DEDICATED I.C. FOR 1 LI-ION CELL OR 3 NI-MH CELLS 5 DIFFERENT OPERATING MODES 150 ma PRECHARGE CURRENT VERY LOW DROP CHARGE SWITCH (130mV @ 800mA) VERY LOW DROP REVERSE SWITCH (130mV
More information1A/800mA Standalone Linear Li-Ion Battery Charger. Features
1A/800mA Standalone Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More informationCE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:
Standalone Linear LiFePO battery charger with Thermal Regulation Series INTRODUCTION: The is a complete constantcurrent constantvoltage linear charger for single cell LiFePO batteries. It s SOT package
More informationTechcode. Features. General Description. Applications. Package Types DATASHEET
General Description Features The TD9054 is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOT23 5 package and low external component count make the
More informationCONSONANCE CN3051A/CN3052A. 500mA USB-Compatible Lithium Ion Battery Charger. General Description: Features: Pin Assignment.
CONSONANCE 500mA USB-Compatible Lithium Ion Battery Charger CN3051A/CN3052A General Description: The CN3051A/CN3052A is a complete constant-current /constant voltage linear charger for single cell Li-ion
More informationHigh Voltage Solutions in HEV/EV Part II: - DC/DC Converters and Traction Inverters. Hong Huang
High Voltage Solutions in HEV/EV Part II: - DC/DC Converters and Traction Inverters Hong Huang What will I get out of this session? Purpose: To provide an overview of complete high voltage power solutions
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationUltimate Power Perfect Control Complete automotive solutions from Infineon
Selection Guide March 2008 Ultimate Perfect Control Complete automotive solutions from Infineon www.infineon.com/automotivepower Introduction The ultimate power to control your applications (including
More informationA4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More information3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG
3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG General Description The is a 3.5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes
More informationDT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
More informationACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
More informationN4 Series Magnetic Encoder Module High Resolution Module
Features and Benefits Two channel quadrature output Industry standard 7272 line driver output RS-422 compatible output 5V output standard; 24V output available Options up to 5000 pulses per channel per
More informationSM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
More informationRev1.0 UCT V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION FEATURES APPLICATIONS
5V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION The UCT3146 is a highly integrated 5V 1A Li-ion battery linear charging management device. The UCT3146 charges a battery in three phases:
More information3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor
3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor DESCRIPTION ETA9740 is a switching Li-Ion battery charger capable of delivering up to 3A of charging current to the battery
More informationPOWER PROFET A simpler solution with integrated protection for switching high-current applications efficiently & reliably
CONTENTS 2 Efficient Alternative 4 Diagnosis and Protection 6 3 Integrated Protection 6 Switching Cycles 7 Power Loss Reduction Improved Power Protection POWER PROFET A simpler solution with integrated
More informationUser Manual. Wind and Solar Hybrid Charge Controller 1KW / 2KW 48VDC. HCON Series
User Manual Wind and Solar Hybrid Charge Controller HCON Series 1KW / 2KW 48VDC Dear Customer, Thank you very much for choosing our product. This manual contains important information about the installation
More informationETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION
800mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery DESCRIPTION is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its compact package with
More informationLithium Battery Protection Integrated Circuit
.. General Description The series is a highly integrated solution for lithium- ion/polymer battery protection. It contains advanced power MOSFET, high-accuracy voltage detection circuits and delay circuits.
More informationPower Conversion Systems 2005/2006. Schaefer the Power to make it happen.
Power Conversion Systems 2005/2006 Schaefer the Power to make it happen. Company profile workforce experience customer orientation flexibility reliability Schaefer Elektronik, founded in 1969, has grown
More informationPART MAX1612EEE MAX1613EEE TOP VIEW BBATT LRI +3.3V +5V V CPU
19-4785; Rev ; 11/98 EALUATION KIT MANUAL FOLLOWS DATA SHEET Bridge-Battery Backup Controllers General Description The manage the bridge battery (sometimes called a hot-swap or auxiliary battery) in portable
More informationETA A, 3MHz Switching Charger with Dynamic Power Path Management
2.5A, 3MHz Switching Charger with Dynamic Power Path Management DESCRIPTION ETA6003 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,
More informationLSIC1MO120E V N-channel, Enhancement-mode SiC MOSFET
LSIMO2E2, 2, 2 mohm, TO-247-3L LSIMO2E2 2 N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS 2 Typical R DS(ON) 2 mω I D ( T ) 8 A ircuit Diagram TO-247-3L Features
More informationFEATURES TYPICAL APPLICATIO. LTC4062 Standalone Linear Li-Ion Battery Charger with Micropower Comparator DESCRIPTIO APPLICATIO S
FEATURES Charge Current Programmable Up to 1A Charges Single-Cell Li-Ion Batteries Directly from USB Port Preset Float Voltage with ±.35% Accuracy Micropower Comparator for Battery Monitoring Thermal Regulation
More informationPanel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)
Z+ Series Features 2U high uilt-in US, RS232 & RS485 Optional LN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc rbitrary function generation 5 year warranty Minimises system rack
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More information25 to 30 Watt XW Single Series DC/DC Converters
Features 4: Input Voltage Range Low Noise, Highly Regulated Efficiencies to 4 at Full Load No Derating to C Case Temperature Six-Sided Continuous Shielded, Low Thermal Gradient Copper Case Minimum Input
More informationREGULATORS SYNCHRONOUS STEP DOWN (BUCK) Feedback Voltage (V) Switching Freq (khz) MP Internal Internal Comp
REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Current Voltage Freq Soft Start Ext Sync Maximum Operating Input Voltage 1.1V Vin 6V MP2104 2.5 6.0 0.6 1.0 0.4 0.6 1700 Internal Internal Comp MP28114 2.5 6.0 0.6
More informationAdvanced Lithium-Ion Linear Battery Charger
Advanced Lithium-Ion Linear Battery Charger General Description is a single Lithium-Ion or Lithium-Polymer cell linear battery charger which is designed for compact and cost-sensitive handheld devices.
More informationFEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationBL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC
1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package
More informationCE3150B Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation
Standalone Linear Li-Ion Battery Charger with Thermal Regulation INTRODUCTION: The CE3150B is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationLSIC1MO170E V N-channel, Enhancement-mode SiC MOSFET
LSIMOE,, mohm, TO--L LSIMOE N-channel, Enhancement-mode Si MOSFET RoHS Pb Product Summary haracteristics alue Unit DS Typical R DS(ON) mω ( T ). A ircuit Diagram TO--L Features * * Body diode Optimized
More informationBIDIRECTIONAL DC/DC CONVERTER
Features: Description: The 3,500 Watt 48S14.250BC Bidirectional non-isolated DC/DC converter provides a complete solution for invehicle power distribution in 12V/48V battery configurations for a variety
More information2A Synchronous Buck Li-ion Charger
2A Synchronous Buck Li-ion Charger General Description The is a 5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes a high efficiency synchronous buck converter topology to reduce
More informationDelphi D12S Non-Isolated Point of Load
FEATURES High Efficiency: 93.4% @ 12Vin, V/A out Size: 3.x1.x12.mm (1. x.61 x.46 ) Wide input range: 4.V~13.2V Output voltage programmable from.9vdc to.vdc via external resistors No minimum load required
More informationSilvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W output power
Silvertel V1.2 Sept 2014 Datasheet Pb 1 Features IEEE802.3at and IEEE802.3af compliant Maximum 30W output power Dual In-Line (DIL) package size 50.6mm (L) x 30mm (W) Overload, short-circuit and thermal
More informationUAV EFI components In miniature sizes
UAV EFI components In miniature sizes For small 2 and 4 stroke engines in 20cc- 200cc ranges V1.5 ECOTRONS LLC 2016/1 Copyright Ecotrons All rights reserved Contents 1. UAV EFI System Overview... 2 1.1
More informationTechcode. General Description. Features. Applications. Package Types DATASHEET. 1A Standalone Linear Li-lon Battery Charger with Thermal Regulation
General Description Features The is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOP package and low external component count make the ideally
More information1000 WATT 24S12.84FXM DC/DC CONVERTER
Features 4:1 Input voltage range High power density Small size 2.5 x 4.7 x 0.52 Efficiency up to 95.4% Excellent thermal performance with metal case Over-Current and Short Circuit Protection Over-Temperature
More informationPRODUCT DATASHEET AAT3681
General Description The BatteryManager is an integrated single cell lithium-ion/polymer battery charger IC, designed to operate from a DC power source or USB port up to an input voltage of 7.5V. It requires
More informationEmergency lighting units EM powerled
BASIC FX 80 W Combined emergency lighting LED Driver Product description Fixed-output LED Driver for mains operation with integrated Simple CORRIDOR FUNCTION (CF) Emergency lighting LED Driver with manual
More informationECU1000 ELECTRONIC CONTROL UNIT
An advanced electronic system capable to be integrated in a SMART Electro Hydraulic System for heavy modulating, stepping, PST, diagnostic and ESD/BDV actions FEATURES GENERAL APPLICATION is a control
More informationAdvanced Power Electronics Corp.
300mA Low Dropout Linear Regulator with Shutdown Description The is a low dropout, positive linear regu lator with very low quiescent current. The can supply 300mA output current with low dropout voltage
More information1A Linear Li-Ion Battery Charger in SOP8/MSOP8
1A Linear Li-Ion Battery Charger in SOP8/MSOP8 FP8102 General Description The FP8102 is a standalone linear Li-ion battery charger with exposed pad SOP8/MSOP8 package. With few external components, FP8102
More informationLow Power, Low Dropout, 250mA, RF - Linear Regulators
Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationWATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
More informationGeneral Description. Features. Component List. Component Suppliers
General Description The MAX5062A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the performance of the MAX5062A 60V, 300mA ultra-small, high-efficiency, synchronous
More informationXA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers.
Standalone Li-Lon Switch Mode Battery Charger Features Input Supply Range: 4.7V-6V High Efficiency Current Mode PWM Controller End - Charge - Current Detection Output Constant Switching Frequency for Minimum
More informationAutomotive/Transportation Heavy-Duty Transportation
Vishay Intertechnology, Inc. Automotive/ Heavy-Duty www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components Automotive/ Heavy-Duty Railroad Equipment,
More informationCE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation
Standalone Linear Li-Ion Battery Charger with Thermal Regulation INTRODUCTION: The CE3151 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationLTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator
Features n Charge Current Programmable up to 1A n Integrated 1mA Adjustable Low Dropout Linear Regulator n Charges Single Cell Li-Ion Batteries Directly from USB Port n Preset Charge Voltage with ±.35%
More informationLithium Ion Battery Charger for Solar-Powered Systems
Lithium Ion Battery Charger for Solar-Powered Systems General Description: The is a complete constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries.
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationSolar Power Energy Harvesting Electrical Integration
WHITEPAPER Solar Power Energy Harvesting Electrical Integration Contents Introduction... 1 Solar Cell Electrical Characteristics... 2 Energy Harvesting System Topologies... 4 Design Guide... 6 Indoor Single
More informationHM5061 Max.1.6A Li-ion Switching Charger IC
Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum
More informationSilvertel. Ag Features. Multi-Stage Charging. Battery Reversal Protection. Reduced Power Consumption. Wide DC or AC Input Voltage Range
Silvertel V1.3 October 2009 Datasheet Intelligent Pb 1 Features Multi-Stage Charging Battery Reversal Protection Reduced Power Consumption Wide DC or AC Input Voltage Range High Efficiency DC-DC Converter
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More information