REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Feedback Voltage (V) Switching Freq (khz) MP Internal Internal Comp
|
|
- Lionel Flowers
- 6 years ago
- Views:
Transcription
1 REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Current Voltage Freq Soft Start Ext Sync Maximum Operating Input Voltage 1.1V Vin 6V MP Internal Internal Comp MP Internal External Fb/Fixed Vout, Ultra-Small Footprint MP Internal Internal Comp MP (2x) Internal Dual Output MP (2x) Internal Dual Output MP & Internal Step Down + LDO MP Internal Internal Comp NEW MP Internal 3 MHZ Sync Buck TSOT23, NEW MP Internal Wide Input Supply Range 3.0V to 14.5V NEW MP Internal Dynamic Vout Control High Efficiency 100% Duty Cycle NEW MP Internal 100% Duty Cycle NEW MP Internal Dual 1.5 Sync Buck in 3x4 mm QFN14 NEW MP Internal 100% Duty Cycle Power Good Output MP Internal Power Good Output MP External External Comp MSOP10, MP Internal Power Good Output MP Internal Power Good Output MP Internal Power Good Output MP38115A Internal Ultra-Low Input Voltage, Power Good Out MP Internal Precision, Smallest Footprint, Power Good Out NEW MP Internal Low Voltage, 1MHz High SW Frequency Sync Buck with PG MP Internal Ultra-Low Input Voltage, 45mΩ Integrated Top Side FET w/ Bottom FET Maximum Operating Input Voltage 28V MP External External Comp MP External External Comp MSOP10, MP External External Comp MP External Small Footprint, External Soft Start Power Good Output NEW MP Internal High Efficiency, Monolithic Sync Buck with 20mΩ LS FET & PG MP Internal Power Good Output NEW MP Internal High Efficiency, Monolithic Buck with 20mΩ LS FET MP (Min) Internal Power Good Output MP (2x) Internal Dual Output QFN32 (5x5) MP Internal Low Frequency, Higher Efficiency Option to MP2207, MP External External Comp MP External MP Internal High Input Voltage, Small Footprint, External Comp Small Footprint QFN, High SW Frequency for Small Inductor,, MP External External Soft Start Power Good Output MP Internal Power Good Output, NEW MP Internal High Efficiency, Monolithic Sync Buck with 20mΩ LS FET & PG NEW MP Internal Monolithic High Voltage, High Efficiency, Step-down with 20mΩ LS Rds (on) MP Internal 45mΩ Integrated Top Side FET with Bottom FET and Power Good MP (Min) 1.1 (Max) Internal 42mΩ Integrated Top Side FET with Bottom FET and Power Good MP (Max) Internal Power Good Output, LS Sync Gate MP (Max) External 18mΩ Integrated Top Side FET w/ Bottom FET, PG, Freq Tracking, Sync Out + Phase Shift MP (Max) External 18mΩ Integrated Top Side FET w/ Bottom FET, PG, Freq Tracking, Sync Out + Phase Shift QFN20 (3x4) MP (Max) External 18mΩ Integrated Top Side FET w/ Bottom FET, PG, Freq Tracking, Sync Out + Phase Shift QFN20 (3x4) Maximum Operating Input Voltage > 28V MP External External Comp MP Internal Integrated High Side FET w/ LS Sync Gate MP Internal Integrated High Side FET w/ LS Sync Gate MP Internal Integrated High Side FET w/ LS Sync Gate
2 NON SYNCHRONOUS STEP DOWN (BUCK) Current Voltage Freq Soft Start Ext Sync Maximum Operating Input Voltage 24V MP Internal Internal Comp SOT23-6, TSOT23-6 MP Internal Internal Comp SOT23-6, TSOT23-6 MP Internal External Comp, Frequency Sync MSOP10, MP (2x) External External Comp, Dual Output SOIC16, MP (2x) External External Comp, Dual Output MP Internal Ultra-Small MP Internal Internal Comp MP Internal Internal Comp MSOP10E MP External External Comp, MP External External Comp MSOP10, MP Internal External Comp MP (2x) Internal Dual Output MP (Adj.) Internal External Comp, Resistor Programmable up to 4MHz MP (Min) Internal Power Good and Latch Off at Fault MP External External Comp MP External External Comp, PDIP8 MP Internal Power Good Maximum Operating Input Voltage 28V MP Internal Internal Comp & SS, Programmable SOT23-6L MP (Adj.) Internal Resistor Programmable up to 4MHz, Light Eff TQFN10 (3X3) NEW MP Internal High Voltage Buck with few external components NEW MP Internal High switching frequency with external components, MP (Adj.) Internal Resistor Programmable up to 4MHz, Light Eff TQFN10 (3X3) MP (Adj.) External 55V Max Vin, Superior Light Eff, External SS MP External Programmable Current Limit, SOIC, PDIP8 NEW MP External 100V Dump Protection, Programmable Output Current SOIC16 MP (Adj.) Internal 55V Max Vin, Superior Light- Eff, Ext Comp, SOCI8E MP Internal External Comp, MP (Adj.) Internal External Comp, Resistor Programmable up to 4MHz, Light Eff, MP (Adj.) Internal Light Eff, Resistor Programmable Up to 4MHz MP Internal High Voltage Input, Light- Efficiency MP (Adj.) Internal Resistor Programmable up to 4MHz, Light- Eff, MP External External Comp MP External External Comp MP External External Comp MP (Adj.) Internal Resistor Programmable up to 4MHz, Light Eff, STEP-DOWN (BUCK) CONTROLLERS Current Voltage Freq Soft Start Ext Sync NEW MP External Ideal for Applications Greater than 15A MSOP10 Current Regulation (db) LOW DROPOUT (LDO) LINEAR REGULATORS Voltage Dropout Voltage (mv) MP (I O: 100mA) 300 (I O: 150mA) Low Voltage Input MP (I O:150mA) Adj., 2.5V, 2.85V & 3.3V Low Noise, Excellent for RF Applications V OUT MP (I O:150mA) MP (I O: 100mA) 180 (I O: 200mA) Adj., 2.5V, 2.85V & 3.3V Low Cost, Small QFN 2x2 Option Dual LDO Adjustable, TSOT23-6 MP (I O: 250mA) Adj., 2.5V, 2.85V & 3.3V Excellent for RF Applications MP (I O: 500mA) Power Good MP (I O: 500mA) Low Voltage Input, Power Good NEW MP N/A N/A N/A N/A V TT/V TTRef DDR2/3 Termination Regulator E NEW MP High-Performance, Low-Dropout Linear Regulators 150 (IO: 3000mA) Adj., Fast Transient, Ultra-Low Dropout with Bias Supply, QFN (5X5) MP (I O:30mA) NEW MP (x2) MP (IO: 100mA) 220 (IO: 300mA) 73 (I O: 100mA) 145 (I O: 150mA) Ideal for Automotive Dual Fixed Output, 300mA/CH LDO Dual LDO Adjustable and Fixed Output Option, MP (I O: 800mA) Ultra Low Dropout, Fast Transient 1MHz NEW MP (IO: 120mA) SC70-5
3 V OUT Voltage Freq MP , UT MP Variable UVLO, Variable Frequency SOT23-5 MP Variable MP Triple Output Step-Up + Charge Pump for TFT Bias QFN16 (3x3), TSSOP16 MP All Internal FETs SOT23-6 MP Output Disconnect MP Fast Transient Response MP MP /1300 MP QFN16 (4x4), TSSOP14 MP /1300 E MP Triple Output Charge Pump + LDO for TFT Bias QFN16 (3x3), TSSOP16 MP QFN16 (4x4) Controllers MP MP STEP UP (BOOST) CONVERTERS Sync 0.2V/Rsense (Boost Controller) Sync Boost Controller, Lossless Current Sense, Forward, 0.19V/Rsense MSOP10 Flyback, Septic Apps, External Soft Start Max Continuous Current Short Circuit Current Max Channels Enable Logic Fault Flag MP Single MP Dual MP Dual MP Single NEW MP Single NEW MP Single MP Single MP Single MP Prog Single NEW MP Single NEW MP Single NEW MP Single MP Dual MP Prog Single MP Prog Single USB & POWER DISTRIBUTION / CURRENT LIMIT SWITCHES Thermal Fault = Tri-State Thermal Fault = Tri-State Thermal Fault = Tri-State Output Slew Rate Control Prog Current Limit No No Single 500mA Current-Limit Switch No No Dual 500 ma/ch Current-Limit Switch, E No No Dual 500 ma/ch Current-Limit Switch, E No No Small, Industry Standard Pin Out No No Single 700mA Current-Limit Switch E No No Single 800mA Current-Limit Switch E No No Single 1A Current-Limit Switch, E No No Single 1A Current-Limit Switch, E No Yes 1-2A Programmable Current-Limit, 1.4ms Turn-On Time No No QFN8E, E, No No Output Discharge No No 1.5 Current Limit Switch No No 1.5 Current Limit Switch E Note Output Discharge Yes Yes 1-5A Programmable Current-Limit & Slew Rate Control Yes Yes 1-5A Programmable Current-Limit & Slew Rate Control POWER DRIVERS Frequency Output Current MP A Peak, 4.25A Continuous 1.5 High Current Half Bridge MP A Peak, 4A Continuous 2.1 Dual Channel Half Bridge, Optimized For Audio TSSOP20E MP A Peak, 3A Continuous 2.1 Dual Channel Half Bridge, Optimized For Audio AUDIO PRODUCTS CLASS D AUDIO AMPLIFIERS Output Power (W) Efficiency (%) THD+N (%) (db) Type NEW MP W 60 Mono Full-Bridge BTL Output, Ultra-Small for Portables and Mobile Phones NEW MP W 60 Mono NEW MP (2x) 90 1W 60 Stereo MP W 60 Mono PDIP8, MP (2x) 93 1W 60 Stereo NEW MP W 59 Stereo TSSOP20 MP W - Stereo MP W 60 Mono BTL MP W 60 Mono Full-Bridge BTL Output
4 BACKLIGHT WHITE LED DRIVERS (INDUCTORS AND CHARGE PUMPS) VOUT (Max) # of LEDs (Max) # of Strings Current Limit Voltage Frequency Open LED Protection Type MP Buck High Voltage Input, High Efficiency TSOT23-6 MP Buck-Boost Buck-Boost WLED Halogen Replacement up to 5W MP Boost UVLO, Low EMI, Thermal Shutdown TSOT23-6 MP Boost Internal Open LED Protection MP Boost MP Variable Boost, TSOT23-6, MP Boost Integrated Flash QFN16 (4x4) MP Boost UVLO, External Comp QFN16 (4x4) MP Boost Large Panel Drive, High Voltage Output MP Boost NEW MP /1200 Boost NEW MP /1200 Boost MP MP AC (190Vpp) 120V AC (240Vpp) EL EL EL Lamp 240 EL Lamp 1.3A Current Limit, UVLO, Low EMI, Thermal Shutdown 8-CH, Notebook Backlight Solution, LED Short Protection, Thermal Shutdown 6-CH, Notebook Backlight Solution, LED Short Protection, Thermal Shutdown,, QFN24 (4x4) QFN24 (4x4) EL Lamp 190Vpp AC Output EL EL Lamp 240Vpp AC Output EL, QFN8 (3x3) MP1519L Charge Pump Common Cathode QFN16 (3x3), TQFN16 (3x3) MP Charge Pump Common Cathode QFN16 (3x3) MP Charge Pump MP Charge Pump MP Charge Pump Single Wire Brightness Control, Common Cathode Charge Pump Single Wire Brightness Control, Common Anode Single Wire Brightness Control, Common Anode with Flash QFN16 (3x3) QFN16 (3x3) QFN16 (3x3) NEW MP Boost Single-Cell Input, 40V Out QFN8 (2X3) NEW MP Boost Single-Celled Input, Program OVP QFN8 (2X3) MP Regulated Charge Pump Internal Soft Start TSOT23-6 CCFL DRIVERS # of Lamps I OUT Tolerance I SUPPLY Integrated Switches MP1010B % 1.8 Resonant Frequency TSSOP20E MP % 1.2 Resonant Frequency TSSOP20E MP % 1.4 TSSOP28 MP1048 Up to % 2.2 SOIC28, TSSOP28 PHOTO FLASH SOLUTIONS Charge Type V SW (Max) V OUT (Max) I OUT (Max) I OUT (Min) MP3351 Xenon Flash V, 2A Integrated Photo Flash Charger With IGBT QFN16-3 MP3352 Xenon Flash V, 2.5A Integrated Photo Flash Charger with IGBT and Quench QFN16-3 TRANSFORMER BASED POWER SUPPLIES P OUT (W) Topology Voltage Frequency MP W (Max) 2.0 Flyback / Forward W, Integrated 150V Power Switch NEW MP W 4.0 Flyback / Forward W Integrated 150 V Power Switch MP W (Max) 0.2V/Rsense Flyback / Forward Boost Controller MP W (Max) 0.19V/Rsense Flyback / Forward Lossless Current Sense, Septic Apps MSOP10
5 PoE PD IDENTITY Pass Device Current Limit Thermal Protection IEEE Detection & Classification MP V, 0.8Ω DMOS 450 Yes 802.3af 15W PoE PD Controller PD CONTROLLERS V OUT Voltage Freq Sync MP MP V/Rsense (Boost Controller) Drive 0.19V/Rsense Sync Boost Controller, Optimized for PoE PD Power, Lossless Current Sense, Forward, Flyback, Septic Apps, External Soft Start MSOP10 MP V W, Integrated 150V Power Switch NEW MP V W Integrated 150 V Power Switch BATTERY CHARGERS/PROTECTION # of Cells I CHARGE Trickle Charge Charge Status Charge Type Description MP Up to 60 CV/CC Linear Li + LINEAR Charger with System Power Path Management MP Up to 1.0 CV/CC Linear Includes Battery Temp Monitor, Trickle Charge MP Up to 1.0 CV/CC Linear Dual Input USB & AC-Adapter MP Up to.30 CV/CC Linear Simple System Charger 50mA 300mA Prog Charge No NTC MP Up to.15 CV/CC Linear Simple System Charger 50mA 150mA Prog Charge No NTC MP Up to 60 CV/CC Linear Li-lon, Linear Battery Charger with 10mA High Voltage LDO MP Up to 1.0 CV/CC Linear Includes NTC, Battery Temp Monitor MP Up to 1.0 CV/CC Linear Includes NTC, Battery Temp Monitor, Trickle Charge MP Up to 1.0 CV/CC Linear Wide IBF Hysteresis, NTC MP Up to 1.0 CV/CC Linear Dual-mode USB & AC-Adapter MP Up to 1.0 CV/CC Linear Auto-Charge Term & Recharge, Timer MP Up to 1.0 CV/CC Linear Ichg=10% of Iset, Timer, Auto-term & Recharge MP Up to 1.0 CV/CC Linear Includes LDO Mode & Timer MP Up to 1.0 CV/CC Linear Travel Charger MP Up to 60 CV/CC Linear Li + Linear Battery Charger with 10% Battery-Full Threshold and Flexible NTC Interface Protections MP Battery Protection Li-Ion Battery Charger Protection Circuit MP Battery Protection Li-Ion Battery Charger Protection Circuit QFN12 (3x4) PRECISION ANALOG OPERATIONAL AMPLIFIERS GBW (µa) (db) Slew Rate (V/µs) Offset Voltage (mv) MP MP MP Dual Channel MP High Voltage HIGH SIDE CURRENT SENSE AMPLIFIERS (µa) (%/V) Offset Voltage (mv) MP High Side Current Sense, VOLTAGE REFERENCE Output Voltage Initial Accuracy (%) Operating Current Zout (Ω) Description MP uA to 10mA V Shunt Reference Precision Shunt Reference SOT23 Frequency Forward Voltage (mv) Operating Current Quiescent Current INTELLIGENT RECTIFIERS Min Turn-On Time Fast Turn-Off Intelligent NEW MP ns Ultra-Fast Turnoff Transient Response (20 ns), Rectifier Fast Turn-Off Intelligent Ultra-Fast Turnoff Transient Response (20 ns) NEW MP ns, Rectifier with a Longer Blanking Time (1600ns) Description
6 PART NUMBERING NOMENCLATURE PART NUMBERING EXAMPLE: MP1521EK LF Z MP 1521 E K LF Z Monolithic Power Temperature Grade Lead Free Tape & Reel MP#### C 0 to +70 C G QFN (2x2) K MSOP LF Z MP##### E 20 C to +85 C D QFN (2x3) H MSOP w/exposed PAD LF Z D 40 C to +85 C Q QFN (3x3) P H 40 C to +125 C L QFN (3x4) E K 55 C to +125 C R QFN (4x4) S V QFN (4x5) W U QFN (5x5) N QJ QFN (5x6) Y QK QFN (6x6) X QM QFN (6x7) T QN QFN (7x7) Z QP QFN (7x8) J QQ QFN (8x8) M F XN C PDIP (300 mil) SC70 SOIC SOIC - WB w/exposed PAD SOIC w/exposed PAD SOIC-WB (Wide-Body) Sorted Wafer SOT23 (1.1mm height) TO220 TSOT23 (0.9mm height) TSSOP TSSOP w/exposed PAD Unsorted Wafer WLCSP Monolithic Power Systems MPS US Corporate Headquarters 6409 Guadalupe Mines Road San Jose, California USA Tel: Fax: H
Automotive & Industrial
MPS - Simple, Easy Solutions Automotive & Industrial Power Management Solutions www.monolithicpower.com Quality Assurance and Reliability Commitment The MPS Quality Assurance organization develops, coordinates,
More informationStep-Up AIC1628 AIC1634 AIC1638 AIC1639 AIC1642 AIC1647 AIC1880 AIC1896 AIC3402 AIC3411 AIC3412 AIC3413 AIC3415
2017.2 Quick Reference - Power Conversion INDEX DC/DC Converter for Portable Application p4 Quick Reference Quick Reference - Power Conversion P.1 Quick Reference - Power Manipulation P.2 AIC1628 AIC1634
More informationMP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO
The Future of Analog IC Technology DESCRIPTION The MP2631 is a linear, high performance single cell Li-Ion or Li-Polymer battery charger with 1mA LDO. By integrating high voltage input protection into
More informationMobile Communications Product Guide
Mobile Communications Product Guide Part Number Description Package(s) Available (Lead-free) Page No. LED Backlight Controller ICs for Small-Size LCD Panels OZ521 Boost Converter Controller 8 E-SOP, SOP
More information2A Switch-Mode Li-Ion Battery Charger
2A Switch-Mode Li-Ion Battery Charger General Description The is a highly integrated switch-mode Li-Ion Battery Charger. With few external components, is well suited for a wide range of portable applications.
More informationNuances in Ultra-Low Power Designs for Wearable Products. Steven Schnier and Chris Glaser March 2016
Nuances in Ultra-Low Power Designs for Wearable Products Steven Schnier and Chris Glaser March 2016 1 Why is Low Power Needed? Wearables consist of many functions Small Battery with Charger Li-Ion Battery
More informationETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION
800mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery DESCRIPTION is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its compact package with
More information3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor
3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor DESCRIPTION ETA9740 is a switching Li-Ion battery charger capable of delivering up to 3A of charging current to the battery
More informationXA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers.
Standalone Li-Lon Switch Mode Battery Charger Features Input Supply Range: 4.7V-6V High Efficiency Current Mode PWM Controller End - Charge - Current Detection Output Constant Switching Frequency for Minimum
More information5A Synchronous Buck Li-ion Charger With Adapter Adaptive
5A Synchronous Buck Li-ion Charger With Adapter Adaptive General Description The is a 5A Li-Ion battery charger intended for 4.4~14 wall adapters. It utilizes a high efficiency synchronous buck converter
More informationAdvanced Automotive LED Lighting Solutions: Challenges and Solutions
Advanced Automotive LED Lighting Solutions: Challenges and Solutions Agenda LED Applications in Automotive Advantages of LED Lighting in Automotive Technical Requirement & Challenge of Powering LEDs in
More information3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG
3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG General Description The is a 3.5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes
More information2A Synchronous Buck Li-ion Charger
2A Synchronous Buck Li-ion Charger General Description The is a 5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes a high efficiency synchronous buck converter topology to reduce
More informationACE4108 Max.2A Li-ion Switching Charger IC
Description The ACE4108 is a 2A Li-Ion battery switching charger intended for 12V. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More information500mA Linear Li-Ion Battery Charger in SOT23
500mA Linear Li-Ion Battery Charger in SOT23 General Description The is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, is well suited for a wide
More informationVS6102 Standalone Linear Lithium Battery Charger
General Description VS6102 is a complete constant-current & constant voltage linear charger for single cell lithium-ion batteries. Its SOT-23 package and low external component count make VS6102 ideally
More informationStandalone Linear Li-Ion Battery Charger with Thermal Regulation
HM4056 Standalone Linear Li-Ion Battery Charger with Thermal Regulation FEATURES DESCRIPTION Programmable Charge Current up to 1A No MOSFET, Sense Resistor or Blocking Diode Required Constant-Current/Constant-Voltage
More informationSC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications
Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver
More informationBuck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input. Linear Technology Corporation
Buck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input Linear Technology Corporation 1 Where are the Vin, min
More informationME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054
Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT Standalone Linear Li-Ion Battery Charger in ThinSOT -4.2V DESCRIPTION is a constant-current/constant-voltage linear charger for
More information800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery
800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion
More informationLM3621 Single Cell Lithium-Ion Battery Charger Controller
Single Cell Lithium-Ion Battery Charger Controller General Description The is a full function constant voltage, constant current (CVCC) lithium-ion (Li+) battery charger controller. It provides 1% regulation
More information800mA Lithium Ion Battery Linear Charger
GENERAL DESCRIPTION is a complete CC/CV linear charger for single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is needed and
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More informationA4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More information1A Linear Li-Ion Battery Charger in SOP8
1A Linear Li-Ion Battery Charger in SOP8 FP8103 General Description The FP8103 is a standalone linear Li-ion battery charger with exposed pad SOP8 package. With few external components, FP8103 is well
More informationHM5061 Max.1.6A Li-ion Switching Charger IC
Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum
More information1A Linear Li-Ion Battery Charger in SOP8/MSOP8
1A Linear Li-Ion Battery Charger in SOP8/MSOP8 FP8102 General Description The FP8102 is a standalone linear Li-ion battery charger with exposed pad SOP8/MSOP8 package. With few external components, FP8102
More informationCE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:
Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.
More information800mA Linear Li-Ion Battery Charger
800mA Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its package and low external component
More informationChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications
2.5A USB/Adapter Switching Charger General Description The is a highly-integrated switch-mode battery charge management device for 1 cell Li-Ion and Li-polymer batteries in a wide range of tablet and other
More informationFEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationBL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC
1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package
More informationDT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
More information2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count
.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP DESCRIPTION ETA6 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,
More informationPT1054 Lithium Ion Battery Linear Charger
GENERAL DESCRIPTION PT1054 is a complete CC/CV linear charger f or single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is
More information1A is compatible with the USB interface, linear battery management chip
1A is compatible with the USB interface, linear battery management chip General Description The is a constant- current / constant- voltage charger circuit for single cell lithium-ion batteries. The device
More information800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display
800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationQC 2.0 compliant Portable Power Bank Single Chip IC
Features Internally embedded 1A Max. charge mode, charging current adjustable when under 1A; OVP function when charge, charge terminated when charge voltage over 6.2V; Trickling/CC/CV three charging stages,
More information800mA Lithium Ion Battery Linear Charger
800mA Lithium Ion Battery Linear Charger General Description is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. Furthermore the is specifically designed
More informationFEATURES. Charging. - High Voltage Chemistry Support: up to 4.35V. Others
HM5B GENERAL DESCRIPTION The HM5B series of devices are highly integrated Li-Ion and Li-Pol linear chargers targeted at small capacity battery for portable applications. It is a complete constant-current/
More informationDIO2054 DIO2051/2052/DIO2054. Descriptions. Features. Typical Application. Applications. Ordering Information
DIO2051/2052/DIO2054 Limited Datasheet For full content datatasheet, please go to Email datasheet.requiry@dioo.com Single/Dual/Quad, RailtoRail Low Power Amplifier /support/doc.html or Features RailtoRail
More informationDT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant
More informationACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge
Description The ACE4054C is a single cell, fully integrated constant current (CC)/ constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More informationIP5209. Fully-integrated power bank System-On-Chip with 2.1A charger, 2.4A boost converter and DCP support. 1 Features. 2 Applications.
Fully-integrated power bank System-On-Chip with 2.1A charger, 2.4A boost converter and DCP support 1 Features Synchronous switching charger and synchronous boost converter 2.1A synchronous switching charger,
More informationCE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation
Standalone Linear Li-Ion Battery Charger with Thermal Regulation INTRODUCTION: The CE3151 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationEUP8075/8079. Preliminary. USB-Compliant Li-Ion Battery Charger Integrated with System Power-Path Management FEATURES DESCRIPTION APPLICATION
Preliminary EUP8075/8079 USB-Compliant Li-Ion Battery Charger Integrated with System Power-Path Management DESCRIPTION The EUP807X series of devices are highly integrated Li-ion linear chargers and system
More informationReach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters
Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters John Bazinet Staff Scientist Power Products David Loconto Design Center Manager Power Products Steve Knoth Senior
More informationCOTAG GENERAL DESCRIPTION
GENERAL DESCRIPTION The YF8036 is a highly integrated Li-ion battery linear charging management device targeted at space limited portable applications. The YF8036 offers an integrated MOSFET and current
More informationFully integrated constant current/constant voltage Li-ion battery charger
Description The ACE4054 is a single cell, fully integrated constant current (CC) / constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the
More information2 cell Li-ion Battery Charge from 3V~12V
2 cell Li-ion Battery Charge from 3V~12V General Description The is a complete constant-current/ constant voltage switching charger for multi cell lithium-ion batteries. Boost+Linear charger work with
More informationLTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator
Features n Charge Current Programmable up to 1A n Integrated 1mA Adjustable Low Dropout Linear Regulator n Charges Single Cell Li-Ion Batteries Directly from USB Port n Preset Charge Voltage with ±.35%
More informationHM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
More informationACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
More informationCONSONANCE CN3051A/CN3052A. 500mA USB-Compatible Lithium Ion Battery Charger. General Description: Features: Pin Assignment.
CONSONANCE 500mA USB-Compatible Lithium Ion Battery Charger CN3051A/CN3052A General Description: The CN3051A/CN3052A is a complete constant-current /constant voltage linear charger for single cell Li-ion
More informationPackage: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF
FEATURES Programmable Charge Current Up to 8mA No MOSFET, Sense Resistor or Blocking Diode Required Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging Thermal Regulation
More informationRev1.0 UCT V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION FEATURES APPLICATIONS
5V 1A Standalone Linear Li-ion Battery Charger GENERAL DESCRIPTION The UCT3146 is a highly integrated 5V 1A Li-ion battery linear charging management device. The UCT3146 charges a battery in three phases:
More informationFEATURES TYPICAL APPLICATIO. LTC4062 Standalone Linear Li-Ion Battery Charger with Micropower Comparator DESCRIPTIO APPLICATIO S
FEATURES Charge Current Programmable Up to 1A Charges Single-Cell Li-Ion Batteries Directly from USB Port Preset Float Voltage with ±.35% Accuracy Micropower Comparator for Battery Monitoring Thermal Regulation
More informationDesigning Applications with Lithium-Ion Batteries
Application Note Roland van Roy AN025 Sep 2014 Designing Applications with Lithium-Ion Batteries Contents 1. Introduction...1 2. Single Li-Ion Cell as Power Source...2 3. Battery Charging...6 4. Battery
More informationTechcode. General Description. Features. Applications. Package Types DATASHEET. 1A Standalone Linear Li-lon Battery Charger with Thermal Regulation
General Description Features The is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOP package and low external component count make the ideally
More informationLithium Ion Battery Charger for Solar-Powered Systems
Lithium Ion Battery Charger for Solar-Powered Systems General Description: The is a complete constant-current /constant voltage linear charger for single cell Li-ion and Li Polymer rechargeable batteries.
More informationFull Fail-Safe RS-485/RS-422 Transceiver with IEC61000 ESD Protection
Intersil Interface Products High Performance Analog Full Fail-Safe /RS-422 Transceiver with IEC61000 ESD Protection Tiny MSOP Saves of board space over SOIC 0% of board IEC61000-4-2 Protection ±15kV Airgap
More informationHX6038 HX
HX1001 Advanced Linear Charge Management Controller Features Preset 8.4V Charge Voltage with 1% Accuracy Input Voltage: 9V-16V Pre-Charging, the Charge Current is Programmable Charge Current Up to 1A adjustable
More informationXA4217. Preset 8.4V Charge Voltage with 1% Accuracy
High Accuracy Linear Li-Lon Battery Charger Features Preset 8.4V Charge Voltage with 1% Accuracy Input Voltage:9-10V DC Pre-Charging, the Charge Current is Programmable Charge Current Up to 1A adjustable
More information300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
More informationTechcode. Features. General Description. Applications. Package Types DATASHEET
General Description Features The TD9054 is a complete constant current/constant voltage linear charger for single cell lithium ion batteries. Its SOT23 5 package and low external component count make the
More informationSolar Power Energy Harvesting Electrical Integration
WHITEPAPER Solar Power Energy Harvesting Electrical Integration Contents Introduction... 1 Solar Cell Electrical Characteristics... 2 Energy Harvesting System Topologies... 4 Design Guide... 6 Indoor Single
More informationThe XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V-16V End - Charge - Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion batteries. Its ESOP-8 package and low external
More informationSGM4056 High Input Voltage Charger
GENERAL DESCRIPTION The SGM456 is a cost-effective, fully integrated high input voltage single-cell Li-ion battery charger. The charger uses a CC/CV charge profile required by Li-ion battery. The charger
More information1A/800mA Standalone Linear Li-Ion Battery Charger. Features
1A/800mA Standalone Linear Li-Ion Battery Charger General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More information4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:
4707 DEY ROAD LIVERPOOL, NY 13088 PHONE: (315) 701-6751 FAX: (315) 701-6752 M.S. KENNEDY CORPORATION MSK Web Site: http://www.mskennedy.com/ Voltage Regulators By Brent Erwin, MS Kennedy Corp.; Revised
More informationDEMO CIRCUIT 1473A QUICK LT3650EDD-8.4/8.2. LT3650EDD-8.4/8.2 2A Monolithic Li-Ion Battery Charger DESCRIPTION OPERATING PRINCIPLE
DEMO CIRCUIT 1473A QUICK LT3650EDD-8.4/8.2 START GUIDE DESCRIPTION Demonstration Circuit 1473A is a 2A Monolithic Li-Ion Battery Charger featuring the LT3650EDD-8.4/8.2. The LT3650 is a complete mid-power
More informationA4059. AiT Semiconductor Inc. Available in PSOP8 Package APPLICATION ORDERING INFORMATION
STANDALONE LINEAR LI-ION BATTERY CHARGER WITH THERMAL REGULATION DESCRIPTION The is charging management circuit that can be programmed through an external resistor constant current / constant voltage charging.
More information1A Single Chip Li-Ion and Li-Polymer Charger
1A Single Chip Li-Ion and Li-Polymer Charger General Description The is a complete constant-current / constant-voltage linear charger for single cell lithium-ion battery. Its TDFN-10 package and low external
More informationM.S. Kennedy Product Selection Guide 2013 International Version
M.S. Kennedy Product Selection Guide 2013 International Version Page 2 Hermetic Linear Voltage Regulators 4 Switching Regulators and POL Modules 5 Plastic Encapsulated Modules (PEM), Motor-Control, IGBT-
More informationWATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
More informationWhy Not A Wire? The case for wireless power. Kalyan Siddabattula System Architect bqtesla Wireless Power Solutions TEXAS INSTRUMENTS
Why Not A Wire? The case for wireless power Kalyan Siddabattula System Architect bqtesla Wireless Power Solutions TEXAS INSTRUMENTS http://dailyreporter.com/files/2009/07/powertheft-070709.jpg 1 Wireless
More informationPower Management Solutions
Spring/Summer 2014 Power Management Solutions MICRO DC/DC WITH INTEGRATED COIL IN THIS ISSUE 1.5A, 5.5V CONSTANT ON TIME ONLY 2.5 x 3.2 x 1.0mm XC8107/08/09 85m High Function Power Switch XC9270/71 30V,
More informationLow Power, Low Dropout, 250mA, RF - Linear Regulators
Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice
More informationCONSONANCE. 1A LiFePO4 Battery Charger CN3058E. Features: General Description: Applications: Pin Assignment
A LiFePO4 Battery Charger CN3058E General Description: The CN3058E is a complete constant-current /constant voltage linear charger for single cell LiFePO4 rechargeable batteries. The device contains an
More informationL, LTC, LTM, LT, Burst Mode, OPTI-LOOP, Over-The-Top and PolyPhase are registered
DEMO CIRCUIT 1568A QUICK START LT3652EDD GUIDE DESCRIPTION Demonstration Circuit 1568A is a 2A Monolithic Multi- Chemistry battery charger for solar power applications featuring the LT3652EDD. The LT3652
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 551A-B LITHIUM-ION BATTERY CHARGER WITH CHARGE TERMINATION
DESCRIPTION LTC4002-8.4 Demonstration circuit 551A-B is a complete constant-current/constant- voltage battery charger designed to charge a two cell Lithium-Ion Battery. Programmed for 3A charge current,
More information500mA Standalone Linear Li-Ion Battery Charger. Features
500mA Standalone Linear LiIon Battery Charger General Description The is a complete constantcurrent/constant voltage linear charger for single cell lithium ion batteries. Its SOT235 package and low external
More information1A Single Chip Li-Ion and Li-Polymer Charger
1A Single Chip Li-Ion and Li-Polymer Charger General Description The LP28055 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion battery. Its ESOP8 package and low
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1061A LINEAR LI-ION BATTERY CHARGER WITH DUAL SYNCHRONOUS BUCK REGULATOR
Demonstration circuit 1061A is a complete single cell Lithium-Ion battery charger and two synchronous buck voltage regulators with adjustable output voltages. Operating at a frequency of 2.25MHz, the regulators
More informationDIO5538B 5~100mA,Single Li-ion Battery Charger
5~100mA,Single Li-ion Battery Charger Rev 1.1 Features Broad Programmable Charging Current: 5~100mA Over-Temperature Protection Under Voltage Lockout Protection Reverse current protection between BAT and
More informationCHARGE SOURCE/LOAD GROUND
DS2715 NiMH Battery Pack Charge Controller www.maxim-ic.com DESCRIPTION The DS2715 is well suited for cost-sensitive charger applications where the battery pack is either internal or external to the application.
More informationPower Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board
VISHAY BCCOMPONENTS www.vishay.com Aluminum Capacitors By Gerald Tatschl MAL29699003E3 96 HVC ENYCAP TM - MINI CHARGER AND BACKUP BOARD DESCRIPTION The MAL29699003E3 mini charger and backup demonstration
More informationHigh Voltage Solutions in HEV/EV Part II: - DC/DC Converters and Traction Inverters. Hong Huang
High Voltage Solutions in HEV/EV Part II: - DC/DC Converters and Traction Inverters Hong Huang What will I get out of this session? Purpose: To provide an overview of complete high voltage power solutions
More informationMCP Stand-Alone System Load Sharing and Li-Ion / Li-Polymer Battery Charge Management Controller. Features. Applications.
Stand-Alone System Load Sharing and Li-Ion / Li-Polymer Battery Charge Management Controller Features Integrated System Load Sharing and Battery Charge Management - Simultaneously Power the System and
More informationAAT3683 PRODUCT DATASHEET. 1A Linear Li-Ion Battery Charger. Features. General Description. Applications. Typical Application
General Description The BatteryManager is a highly integrated single-cell lithium-ion / polymer (Li-Ion) battery charger that operates from a USB port or an AC adapter input up to an input voltage of 7.5V.
More informationAAT A/1.0A USB Port/Adapter Lithium-Ion/Polymer Battery Charger
General Description Features BatteryManager The AAT3689 BatteryManager is a highly integrated single cell lithium-ion/polymer battery charger IC designed to operate with port and AC adapter inputs. It
More informationLX2206 Dual Level Li-Ion Battery Charger
Dual Level Li-Ion Battery Charger Manufactured by: Microsemi Corporation Integrated Product Group Garden Grove, Telephone: 714 898-8121 More than solutions enabling possibilities PRODUCT DESCRIPTION The
More informationTPS62730 step down converter for low-power RF applications
TPS62730 step down converter for low-power RF applications. Briefing presentation Presented by: Thomas Hoffman 1 Why was the part developed? 2 Market Situation Metering Mobility is an unbreakable trend
More informationETA A, 3MHz Switching Charger with Dynamic Power Path Management
2.5A, 3MHz Switching Charger with Dynamic Power Path Management DESCRIPTION ETA6003 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,
More informationCONSONANCE CN mA USB-Compatible Lithium Battery Charger. General Description: Features: Applications: Pin Assignment
CONSONANCE 500mA USB-Compatible Lithium Battery Charger CN306 General Description: The CN306 is a complete constant-current /constant voltage linear charger for single cell lithium rechargeable battery.
More informationDIO5518D 300mA,Single Li-ion Battery Charger
300mA,Single Li-ion Battery Charger Rev.0 Features Programmable Charge Current Up to 300mA Over-Temperature Protection Under oltage Lockout Protection Over oltage Lockout Protection Reverse current protection
More informationXT2059. Programmable voltage and current linear battery management chip. General Description. Applications. Package. Features
Programmable voltage and current linear battery management chip General Description The is charging management circuit that can be programmed through an external resistor constant current / constant voltage
More informationbq2057 Advanced Li-Ion Linear Charge Management IC Features General Description Pin Names Pin Connections
bq05 Advanced Li-Ion Linear Charge Management IC Features Ideal for single- and dual-cell Li-Ion packs with coke or graphite anodes Dropout voltage as low as 0.V AutoComp dynamic compensation of battery
More information