Simi Fax Page 1

Transcription

1 Page 1

2 Page 2 Description Piston compressors Table of contents Page Stationary compressor units - KA 10 and 15 bar 5 Supplementary compressor units - KC - 10 and 15 bar 6 Portable compressor units - KT - 10 bar 7 Stationary double compressor units - 10 and 15 bar 7 Options for pistoncompressors 7 Silence Pack - K11, K112 and K13 8 Compressor blocks - 10 and 15 bar 9 Options for compressor blocks 9 Starting air compressors - Espholin Starting air compressor units -classified and not classified 10 Blocks for starting air compressor - classified and not classified 10 Accessories for starting air compressors 11 B-Line B-line stationary compressor units - 10 and 15 bar 12 Blocks for B-Line 10 and 15 bar 12 B-line portable compressor units - 10 and 15 bar 13 Direct driven piston compressors - 230V 13 Screw compressors Screw compressors AP04-AP22 16 Screw compressors SR - Speed regulated SR45-SR Screw compressors S04-S Receivers Receivers for compressor units 20 Receiver kits 21 E-motors and acoustic booths E-motors 50/60 HZ 22 Silencers for KA units 22 Kit for silencers for KA units 22 Fridge dryers Fridge dryers - BC model and HT model 23 Flyder til køletørrer 23 Adsorption dryer STENOPAC 2000 Std. and Superplus 24 Adsorption dryer STENOPAC MSD 24 Adsorption dryer STENOPAC HRG, HED and ALD 25 Filters Prefilter - P series + filter elements 26 Finefilter - V series + filter elements 27 Microfilter - M series + filter elements 28 Super microfilter - S series + filter elements 29 Activate carbon filter - A series + filter elements 30 Filter elements for PE + FF series 31 Filter elements for MF + SMF series 32 Filter elements for AK series 33 Air treatment equipment STENOMAT water separators 34 STENOSEP oil/water separators 34 STENHØJ cyclone water separators 35 STENHØJ air cooled after cooler - with stenomat 35 Optional extras 36 Sales and delivery conditions 37

3 Page 3 Piston compressors:

4 Page 4 Piston compressors: KA STENHØJ s industry piston compressor the KA-series is produced in at our factory in Barrit, Denmark. The KA compressor is fitted with a cast iron pump unit, which gives a longer working life. Along with the few revolutions/min. it means a durable and reliable piston compressor. The compressor comes complete with oil level control. Moreover, the compressor can be delivered with Star/Delta starters and semi automatic control if required. KA-series range from 0,55 kw to 11 kw all in 10 and 15 bar. Silence Pack The Silence Pack compressor from STENHØJ is a novelty within industrial- and workshop compressors. This model is equipped with our well known piston compressors, filters and dryers from the wide range of STENHØJ products. The compressor is placed in a silenced cabinet which minimizes the noise (64 DB). As the moisture in the compressed air is removed before the air reaches the air tank, the air is dry and th makes this compressor model very suitable as preparation for breathing air. The complete unit comes fully assembled and tested from the factory, which makes installation simple and easy and at the same time very cost effective. The models we deliver comes with engine sizes in 4 kw and 7,5 kw and in 10 Bar and 15 Bar. Espholin STENHØJ s reliable 30 bars starting air compressor is supplied in several models in classified and not classified models. This model is fitted with a cast iron pump unit and runs with low numbers of revolution. B-Line STENHØJ s stationary and transportable compressor series for workshops. Are available in 400V and 230V. The B-Line range from 0,75 kw 7,5 kw in 10 and 15 bar Please request prices for other combinations.

5 Page 5 Stationary compressor units type KA -10 bar Item no. Type kw / HK F.A.D. L/min.* KA4F-50 L ** 0,55 /0, KA3G-50 ** 1,1 / 1, KA3G-150 ** 1,1 / 1, KA25B-90 ** 1,5 / 2, KA25B-150 ** 1,5 / 2, KA66B-150 ** 2,2 / 3, KA66B-280 ** 2,2 / 3, KA66A-150 ** 3,0 / 4, KA66A-280 ** 3,0 / 4, KA11A-280 ** 4,0 / 5, KA11A-500 ** 4,0 / 5, KA112C-500 **+*** 5,5 / 7, KA112F-500 **+*** 7,5 / * F.A.D. according to ISO 1217 ** Including DOL Starter *** Switch for oil level control not included L= Vertical receiver Stationary compressor units type KA - 15 bar Item no. Type kw / HK F.A.D. L/min.* KA25A-90 ** 1,5 / 2, KA25A-150 ** 1,5 / 2, KA25A-280 ** 1/5 / 2, KA13B-275 L ** 3,0 / 4, KA13B-280 ** 3,0 / 4, KA13C-280 ** 4,0 / 5, KA13C-275 L ** 4,0 / 5, KA13C-500 ** 4,0 / 5, KA112A-500 ** 5,5 / 7, KA112B-500 ** 7,5 / KA112B-1000 ** 7,5 / * F.A.D. according to ISO 1217 ** Including DOL Starter L = vertical receiver Note: See page 7 for options for stationary compressor units - including Star/ Delta Starters

6 Page 6 Supplementary compressor units type KC - 10 bar Item no. Type kw / HK F.A.D. L/min.* KC3F 0,75 / 1, KC3G 1,1 / 1, KC25B 1,5 / 2, KC66B 2,2 / 3, KC66A 3,0 / 4, KC11A 4,0 / 5, KC112C 5,5 / 7, KC112F 7,5 / * F.A.D. according to ISO 1217 KC4F replaced by KT4F (item no ) - See page 7 Supplementary compressor units type KC - 15 bar Item no. Type kw / HK F.A.D. L/min.* KC25A 1,5 / 2, KC13B 3,0 / 4, KC13C 4,0 / 5, KC112A 5,5 / 7, KC112B 7,5 / * F.A.D. according to ISO 1217 Options for KC kompressor Item no Type Piece Hose union Unit nut Hose Pressure switch 1 Please be informed on page 7 for options for stationary compressor units - including Star/Delta Starters

7 Page 7 Best.nr. Type kw / HK F.A.D. L/min.* KT4F** - 220V 0,55 / 0, KT4F* *- 380V 0,55 / 0,75 60 * F.A.D. according to ISO 1217 ** Mounted on console plate Kompressor type KT - 10 bar Stationary double compressor units type KA - 10 bar Item no Type kw / HK F.A.D. L/min.* Price/ EUR KA11AD-500 2x4,0 / 2x5, KA112FD-500 2x7,5 / 2x10, Please request prices for other combinations - in 10 and 15 bar Please note: For double compressors units remember 2 pcs. required of Star/Delta starters Options Item no Type kw DOL Starters 0, DOL Starters 1, DOL Starters 1, DOL Starters 2, DOL Starters 3, DOL Starters 4, DOL Starters 5, DOL Starters 7,5 Item no Type kw Star/Delta starters 4, Star/Delta starters 5, Star/Delta starters 7, Star/Delta starters 11, Star/Delta starters * 11, Vibration damper - set of 4 ** * For 60 HZ V ** Match to all models

8 Page 8 SILENCE PACK SIPA low noise piston compressor - 10 bar Item no. Type kw / HK F.A.D. L/min* db(a) K11 4,0 / 5, K112 7,5 / * F.A.D. according to ISO 1217 SILENCE PACK SIPA low noise piston compressor - 15 bar Item no. Type kw / HK F.A.D. L/min* db(a) K13 4,0 / 5, K112 7,5 / * F.A.D. according to ISO 1217 SILENCE PACK SIPA RM low noise piston compressor - 10 bar Item no. Type kw / HK F.A.D. L/min* db(a) K11 4,0 / 5, K112 7,5 / * F.A.D. according to ISO 1217 SILENCE PACK SIPA RM low noise piston compressor - 15 bar Item no. Type kw / HK F.A.D. L/min* db(a) K13 4,0 / 5, K112 7,5 / * F.A.D. according to ISO 1217 Silence Pack are also available in other versions - among others 220V

9 Page 9 Compressor blocks - 10 bar Item no. Type kw / HK K4F 0,55 / 0, K3G 1,1 / 1, K25B 1,5 / 2, K66A 3,0 / 4, K66B 2,2 / 3, K11A 4,0 / 5, K112C 5,5 / 7, K112F 7,5 / 10 Compressor blocks - 15 bar Item no. Type kw / HK K25A 1,5 / 2, K13B 3,0 / 4, K13C 4,0 / 5, K112A 5,5 / 7, K112B 7,5 / 10 Options Item no. Type kw / HK Semi-automatic K Semi-automatic K Semi-automatic K Semi-automatic K Semi-automatic K22

10 Page 10 Starting air compressor units with motor - 30 bar Item no Type kw / HK F.A.D. L/min Espholin H-2S 4,0 / 5, Espholin H-3S 5,5 / 7, Espholin H-6S 11 / Starting air compressor units with motor - 30 bar - classification* Item no Type kw / HK F.A.D. L/min Espholin H-2S 4,0 / 5, Espholin H-3S 5,5 / 7, Espholin H-6S 11 / Starting air compressor blocks - 30 bar Item no Type kw / HK F.A.D. L/min Espholin H-2S 4,0 / 5, Espholin H-3S 5,5 / 7, Espholin H-6S 11 / Starting air compressor blocks - 30 bar - classification* Item no Type kw /HK F.A.D. L/min Espholin H-2S 4,0 / 5, Espholin H-3S 5,5 / 7, Espholin H-6S 11 / * Classification by DNV (Det Norske Veritas) and LR (Lloyds Register) NB! - please see page 11 for accessories

11 Page 11 Accessories for starting air compressors Item no Type Manual unloader Pressure regulator TR bar Pressure regulator TR bar Pressure regulator TR bar Dirt separator for TR Vibration dampers H-2/H-3 - each piece Vibration dampers H-6 - each piece Pressure switch KPS BAR - 3/8" Pressure switch RT BAR - 3/8" Non return valve H-2/H Non return valve H Pressure gauge 0-60 bar - 1/4" High pressure filter Solenoid valve 110V / 50HZ 30 BAR Solenoid valve V / 60HZ 30 BAR Solenoid valve V / 50HZ 30 BAR Solenoid valve V / 60HZ 30 BAR Solenoid valve 380V / 50 HZ - 440V / 60HZ Solenoid valve 110V DC Solenoid valve 24V DC 30 BAR Oil level control for H Oil level control for H D-O-L starter for H-2-4,0 kw D-O-L starter for H-3-5,5 kw Safety valve 1/2" 30 bar Safety valve 3/8" 33 bar Safety valve 1/4" 0-4 bar til mellemkøler Direct online starters: See page 7

12 Page 12 Stationary compressor units B-Line - 10 bar Item no Type Receiver size kw / HK F.A.D. L/min PL30* 50 2,2 / 3, PL30* 90 2,2 / 3, PL50* 90 3,0 / 4, PL50* 150 3,0 / 4, PE50B * 190 4,0 / 5, PE50B * 280 4,0 / 5, PE50B * 500 4,0 / 5, PL75* 280 4,0 / 5, PL75* 500 4,0 / 5, PL75* 280 5,5 / 7, PL75* 500 5,5 / 7, PL75** 280 5,5 / 7, PL75** 500 5,5 / 7, PL100** 280 7,5 / PL100** 500 7,5 / Stationary compressor units B-Line - 15 bar Item no Type Receiver size kw / HK F.A.D. L/min TE75* 190 4,0 / 5, TE75* 280 5,5 / 7, TE75* 500 5,5 / 7, TE75** 280 5,5 / 7, TE75** 500 5,5 / 7,5 650 * Incl. DOL Starter ** Incl. Star/Delta starter and solenoid valve All compressors are supplied including 3 mtrs cable and CEE-plug Compressor blocks for B-Line - 10 bar Item no Type kw / HK C40230 PE50 4,0 / 5,5 C40240 PL30 2,2 / 3,0 C40250 PL50 3,0 / 4,0 C40280 PL75 4,0 / 5,5 NB: before cylinder C40281 PL75 4,0 / 5,5 NB: after cylinder C40260 PL100 7,5 / Exchange kit for PL75 Block - 3 to 2 cylinder Compressor blocks for B-Line - 15 bar Item no Type kw / HK C40270 TE50 1,5 / 2,0 C40280 TE75 3,0 / 4,0 C40290 TE100 4,0 / 5,5

13 Page 13 Portable compressor units B-Line - 10 bar Item no Type Receiver size kw / HK F.A.D. L/min PL30* 50 2,2 / 3, PL50* 90 3,0 / 4, PL50* 150 3,0 / 4, PL75* 150 4,0 / 5,5 864 Portable compressor units B-Line - 15 bar Item no Type Receiver size kw / HK F.A.D. L/min. C63300 TE75* 150 4,0 / 5,5 450 C63301 TE75* 150 5,5 / 7,5 650 * Including DOL starter All compressors are supplied including 3 mtrs cable and CEE-plug Direct driven piston compressors - 230V Item no Type Receiver size kw /HK F.A.D. L/min.* C65201 ACE 1511** 11 1,2 / 1,5 100 C65204 ACE 2025** 25 1,5 / 2,0 180 C65200 ANE 2515Twin** 15 1,9 / 2,5 225 * Efficient power output at 8 bars ** Oil lubricated version

14 Page 14 Screw compressors:

15 Page 15 Screw compressors: S04-S22 The 4-22 kw Rotary Screw Compressors from STENHØJ are all based on the latest technology and thus has a robust and compact design including an easy-to-use controller which ensures a trouble free and economical operation. S30-S250 The kw Rotary Screw Compressor from STENHØJ are all equipped with an intelligent controller which surveys the operation. All data are shown on a clear display, such as the total hours in load & unload and standby etc. The control board is equipped with a user-friendly menu, which can be delivered in several languages. Moreover, the possibility of remote control is at hand as the control board has this feature built in. The S-Series can be equipped with inverter on selected models. AP04-AP22 (AirPack) Many years of experience has been put into the development of STENHØJ's AirPack solution. The AP-series features a complete unit with built-in dryer, filters and cyclone all mounted on an air receiver. This unit is thus prepared for breathing air. This series is one of the most low noise models on the market, thus enabling installation in work shops. SR45 - SR132 The SR (Speed Regulated) screw compressor models from STENHØJ are equipped with a digital controlled electrical motor. The motor runs as a direct current motor (DC), which is considerably more economical than traditional regulating by frequency inverter. The SR compressors can adjust from % in performance and thus is very suitable for to modulate in accordance with high differences in demand from different productions. Multiple compressor control STENHØJ can offer complete solutions for controlling and surveying several compressors regardless of make and type, in order to reach the optimum operation and the most energy optimal solution. Please always consult us further if you have any questions. Our sales personnel can tailor make solutions for optimization of any production where compressed air is needed.

16 Page 16 Screw compressor AP04 - AP22 Air Pack mounted with receiver, fridge dryer, by-pass and filter Standard control Item no Type Pressure / bar F.A.D. M3/min.* kw /HK AP04 7,5 0,50 4/5, AP ,45 4/5, AP05 7,5 0,72 5,5/7, AP ,66 5,5/7, AP07 7,5 1,14 7,5/ AP ,93 7,5/ AP ,69 7,5/ AP11 7,5 1,68 11/ AP ,41 11/ AP ,14 11/ AP15 7,5 2,47 15/ AP ,10 15/ AP ,68 15/ AP18 7,5 3,07 18,5/ AP ,60 18,5/ AP ,22 18,5/ AP22 7,5 3,46 22/ AP ,04 22/ AP ,58 22/30 * F.A.D. according to ISO Screw compressor SR - Speed regulated Item no Type Pressure / bar F.A.D. M3/min.* kw / HK SR ,34-6,90 37/ SR ,34-8,02 45 / SR ,18-13,98 75 / SR ,48-19, / SR ,76-22, / 175 * F.A.D. according to ISO 1217.

17 Page 17 Screwcompressors S04 - S110 Item no Type Pressure / bar F.A.D. M3/min* kw / HK S04 7,5 0,50 4/5, S ,45 4/5, S05 7,5 0,72 5,5/7, S ,66 5,5/7, S07 7,5 1,14 7,5/ S ,93 7,5/ S ,69 7,5/ S11 7,5 1,68 11/ S ,41 11/ S ,14 11/ S15 7,5 2,47 15/ S ,10 15/ S ,68 15/ S18 7,5 3,07 18,5/ S ,60 18,5/ S ,22 18,5/ S22 7,5 3,46 22/ S ,04 22/ S ,58 22/ S30 7,5 5,75 30/ S ,11 30/ S ,36 30/ S37 7,5 7,10 37/ S ,17 37/ S ,30 37/ S45 7,5 8,00 45/ S ,00 45/ S ,11 45/ S50 7,5 8,67 45/ S ,55 45/ S55 7,5 10,69 55/ S ,51 55/ S ,24 55/ S75 7,5 13,74 75/ S ,44 75/ S ,43 75/ S80 7,5 14,72 75/ S ,26 75/ S90 7,5 15,40 90/ S ,60 90/ S ,50 90/ S110 7,5 18,00 110/ S ,80 110/ S ,90 110/ S132 7,5 18,40 110/ S ,30 110/ S ,20 110/150 * F.A.D. according to ISO 1217.

18 Page 18 Accessories:

19 Page 19 Accessories: Options STENHØJ recognizes the importance of a total solution and therefore we can offer you optional extras for our compressors. In many cases the optional extras are very important critical components to obtain clean dry air. The fridge dryer removes the condensed water and along with the filtration it ensures a dry and technical compressed air. Conversion review for fridge dryer Operation pressure (bar) Conversion factor 0,60 0,70 0,80 0,88 0,94 1 1,04 1,06 1,09 1,10 1,12 1,14 1,15 1,16 1,17 The adsorption dryer removes the condensed water in the compressor at a dew point between minus 20 to minus 70 degrees. These are suitable in the industry of food and to large demands to the quality of the compressed air. STENHØJ offers a large number of filters for purifying purposes of the compressed air. Conversion review for filters Operation pressure (bar) Conversion factor 0,38 0,5 0,63 0,75 0,88 1 1,1 1,3 1,4 1,5 1,6 1,8 1,9 2 2,1 For correct disposal of condensate STENHØJ offer an oil/water separator in several sizes. This unit discharges the remnants of the oil from the condensate, which can be let to the water outlet/sewage. Moreover, we can offer condensate drains in several sizes, which discharges the condensate from for instance the air receiver. STENHØJ cyclone is mounted after the screw compressor to reduce the contents of water in the compressed air. This happens before the connection to the fridge dryer.

20 Page 20 Vertical supplementary air receivers Item no Receiver size Pressure, bar Supplementary air receivers are also available in horizontal version Receivers for compressor units Item no Receiver size Pressure, bar L L L L DB 16 L = Vertical receiver DB = Air receiver for duplex compressors Air receivers approved according to BS EN 286-1

21 Page 21 Receiver kit* Item no Including L receiver 15,5 bar, max L / min Receivers over 275 L,15,5 bar, max L min L receiver 10,5 bar, max L / min Receivers over 275 L, 10,5 bar, max L min L receiver 15,5 bar, max L / min Receiver over 275 L, 15,5 bar, max L min L receiver 10,5 bar, max L / min Receivers over 275 L, 10,5 bar, max L / min Receivers over 1000 L, 15,5 bar, max L / min. * = Including: Flange for testing, manual switch for drainage, pressure gauge and safety valve Reciever certifikate

22 Page 22 Electrical-motors - 50/60 HZ Item no Type kw / HK Voltage K4F 0,55 / 0,75 3 x 400V K3F 0,75 / 1,0 3 x 400V K3G 1,1 / 1,5 3 x 400V K25A/B 1,5 / 2,0 3 x 400V K66B 2,2 / 3,0 3 x 400V K66A + K13B 3,0 / 4,0 3 x 400V K11A + K13C 4,0 / 5,5 3 x 400V K112A + K112C 5,5 / 7,5 3 x 400V K112B/F + K20B 7,5 / 10 3 x 400V K22C 11 / 15 3 x 400V Electrical-motors for starting air compressors - 50/60 HZ Item no Type kw / HK Voltage H-2 4,0 / 5,5 3 x 400V H-2 5,5 / 7,5 3 x 400V H-6 11 / 15 3 x 400V Silencers for KA units Item no Type KA KA KA KA KA KA KA KA KA Item no Type For KA 25+KA For KA11+KA For KA For KA20+KA22 Kit for silencers for KA units

23 Page 23 Fridge dryers Item no Type M 3 /min.* Connection By-pass nr BC-20 0,33 ½" BC-35 0,58 ½" BC-50 0,83 ½" BC-65 1,08 ½" BC-85 1,42 ½" BC-105 1,75 ½" BC-125 2,08 ½" BC-150 P 2,50 1" BC-180 P 3,00 1½" BC-225 P 3,75 1½" BC-300 P 5,00 1½" BC-360 P 6,00 1½" BC-450 P 7,50 1½" BC-550 P 9,17 2"-179, BC-650 P 10,83 2"-179, BC-750 P 12,50 2"-179, BC-850 P 14,17 2"-179, BX 950 P 15,83 2" BX 1150 P 19,17 2½" BX 1300 P 21,67 2½" BX 1500 P 25,00 2½" BX 1650 P 27,50 2½" BX 1850 P 30,83 2½" * At 7 bar - see page 19 for conversion review NB. See page 35 for STENOMAT for fridge dryers Flyder til køletørrere* Item no. Type Indsats til flyder køletørrer BT Indsats til flyder køletørrer BX* Indsats til flyder køletørrer BC * indgår i et kit med slange, vinkel samt o-ringe

24 Page 24 Adsorption dryer - STENOPAC 2000 Standard Item no Type M 3 /min. Connection STENOPAC ,08 ½" STENOPAC ,16 ½" STENOPAC ,25 ½" STENOPAC ,42 ½" STENOPAC ,58 1" STENOPAC ,83 1" STENOPAC ,08 1" STENOPAC ,33 1" STENOPAC ,67 1" Pressure dew point: C At ordering inlet pressure and working pressure must be given Meets the requirements according to ISO Adsorption dryer - STENOPAC 2000 superplus Item no Type M 3 /min. Connection STENOPAC ,08 ½" STENOPAC ,16 ½" STENOPAC ,25 ½" STENOPAC ,42 ½" STENOPAC ,58 1" STENOPAC ,83 1" STENOPAC ,08 1" STENOPAC ,33 1" STENOPAC ,67 1" Pressure dew point: C At ordering inlet pressure and working pressure must be given Meets the requirements according to ISO Adsorption dryer - STENOPAC MSD Item no Type M 3 /min. Connection MSD 5 0,08 3/8" MSD 10 0,16 3/8" MSD 15 0,25 3/8" MSD 25 0,42 ½" MSD 35 0,58 ½" MSD 50 0,83 3/4" MSD 80 1,33 3/4" MSD 100 1,67 1" MSD 150 2,50 1" MSD 225 3,75 1½" MSD 300 5,00 1½" MSD 375 6,25 1½" MSD 550 9,16 2" MSD ,83 2" MSD ,16 2" MSD ,67 2½" Pressure dew point: C for MSD Meets the requirements according to ISO

25 Page 25 Adsorption dryer - STENOPAC HRG Item no Type M3/min. Connection HRG 375 3,75 DN HRG 550 5,50 DN HRG 650 6,50 DN HRG 850 8,50 DN HRG ,00 DN HRG ,50 DN HRG ,50 DN80 Pressure dew point: C for HRG Meets the requirements according to ISO Adsorption dryer STENOPAC HED Item no Type M 3 /min. Connection HED 5 0,08 3/8" HED 10 0,16 3/8" HED 15 0,25 3/8" HED 25 0,42 ½" HED 35 0,58 ½" HED 50 0,83 3/4" HED 80 1,33 3/4" HED 100 1,67 1" HED 175 2,91 1" HED 150 2,50 1" HED 225 3,75 1½" HED 300 5,00 1½" HED 375 6,25 1½" HED 550 9,16 2" HED ,83 2" HED ,16 2" HED ,67 2½" Pressure dew point: C for HED Meets the requirements according to ISO Adsorption dryer STENOPAC ALD Item no Type M 3 /min. Connection ALD 5 0,08 3/8" ALD 10 0,16 3/8" ALD 15 0,25 3/8" ALD 25 0,42 ½" ALD 35 0,58 ½" ALD 50 0,83 3/4" ALD 80 1,33 3/4" ALD 100 1,67 1" ALD 150 2,50 1" ALD 225 3,75 1½" ALD 300 5,00 1½" ALD 375 6,25 1½" ALD 550 9,16 2" ALD ,83 2" ALD ,16 2" ALD ,67 2½" Pressure dew point: C for ALD Meets the requirements according to ISO

26 Page 26 Prefilter P Series Item no. Type M 3 /min.* Connection Stenhøj prefilter cpl. P35 0,58 1/4" Stenhøj prefilter cpl. P70 1,16 3/8" Stenhøj prefilter cpl. P120 2,00 1/2" Stenhøj prefilter cpl. P210 3,50 3/4" Stenhøj prefilter cpl. P320 5,33 1" Stenhøj prefilter cpl. P450 7,50 1 1/4" Stenhøj prefilter cpl. P600 10,00 1 1/2" Stenhøj prefilter cpl. P750 12,50 2" Stenhøj prefilter cpl. P ,33 2" * At 7 bar - see page 19 for conversion review Meets the requirements according to ISO and ISO Prefilter element P Item no. Type Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P Stenhøj prefilter element P1100

27 Page 27 Finefilter V Series Item no. Type M 3 /min.* Connection Stenhøj finefilter cpl. V35 0,58 1/4" Stenhøj finefilter cpl. V70 1,16 3/8" Stenhøj finefilter cpl. V120 2,00 1/2" Stenhøj finefilter cpl. V210 3,50 3/4" Stenhøj finefilter cpl. V320 5,33 1" Stenhøj finefilter cpl. V450 7,50 1 1/4" Stenhøj finefilter cpl. V600 10,00 1 1/2" Stenhøj finefilter cpl. V750 12,50 2" Stenhøj finefilter cpl. V ,33 2" * At 7 bar - see page 19 for conversion review Meets the requirements according to ISO and ISO Finefilter element V Item no. Type Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V Stenhøj finefilter element V1100

28 Page 28 Microfilter M Series Item no. Type M 3 /min.* Connection Stenhøj microfilter cpl. M35 0,58 1/4" Stenhøj microfilter cpl. M70 1,16 3/8" Stenhøj microfilter cpl. M120 2,00 1/2" Stenhøj microfilter cpl. M210 3,50 3/4" Stenhøj microfilter cpl. M320 5,33 1" Stenhøj microfilter cpl. M450 7,50 1 1/4" Stenhøj microfilter cpl. M600 10,00 1 1/2" Stenhøj microfilter cpl. M750 12,50 2" Stenhøj microfilter cpl. M ,33 2" * At 7 bar - see page 19 for conversion review Meets the requirements according to ISO and ISO Microfilter element M Item no. Type Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M Stenhøj microfilter element M1100

29 Page 29 Supermicro filter S Series Item no. Type M 3 /min.* Connection Stenhøj supermicro filter cpl. S35 0,58 1/4" Stenhøj supermicro filter cpl. S70 1,16 3/8" Stenhøj supermicro filter cpl. S120 2,00 1/2" Stenhøj supermicro filter cpl. S210 3,50 3/4" Stenhøj supermicro filter cpl. S320 5,33 1" Stenhøj supermicro filter cpl. S450 7,50 1 1/4" Stenhøj supermicro filter cpl. S600 10,00 1 1/2" Stenhøj supermicro filter cpl. S750 12,50 2" Stenhøj supermicro filter cpl. S ,33 2" * At 7 bar - see page 19 for conversion review Meets the requirements according to ISO and ISO Supermicro filter element S Item no. Type Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S Stenhøj supermicro filter element S1100

30 Page 30 Activate carbon A Series Item no. Type M 3 /min.* Connection Stenhøj activate carbon cpl. A35 0,58 1/4" Stenhøj activate carbon cpl. A70 1,16 3/8" Stenhøj activate carbon cpl. A120 2,00 1/2" Stenhøj activate carbon cpl. A210 3,50 3/4" Stenhøj activate carbon cpl. A320 5,33 1" Stenhøj activate carbon cpl. A450 7,50 1 1/4" Stenhøj activate carbon cpl. A600 10,00 1 1/2" Stenhøj activate carbon cpl. A750 12,50 2" Stenhøj activate carbon cpl. A ,33 2" * At 7 bar - see page 19 for conversion review Meets the requirements according to ISO and ISO Activate carbon element A Item no. Type Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A Stenhøj activate carbon element A1100

31 Page 31 Prefilter element PE Item no. Type Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE Stenhøj prefilter element PE 288 Finefilter element FF Item no. Type Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF Stenhøj finefilter element FF 288

32 Page 32 Microfilter element MF Item no. Type Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF Stenhøj micro filter element MF 288 Supermicro filter element SMF Item no. Type Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF Stenhøj supermicro filter element SMF 288

33 Page 33 Activate carbon element AK Item no. Type Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK Stenhøj activate carbon element AK 288

34 Page 34 STENOMAT condensate drain Item no Type M 3 /min. Connection STENOMAT 1** 5,0 3/4" STENOMAT 10*** 5,0 3/4" + ½" STENOMAT 20 20,0 3/4" STENOMAT " STENOMAT 10* 3/8" Sparepart kit for STENOMAT Transition piece for STENOMAT 1-10 * With dirt collector - for compressors after 1986 ** For mounting in the top *** For mounting in the top and in the back STENOSEP oil/waterseparator Item no Type M 3 /min. Connection STENOSEP 5 2,0 ½" STENOSEP " STENOSEP 15 7,5 1" STENOSEP 30 15,0 1" STENOSEP 60 30,0 1" STENOSEP ,0 1" ACTIVATED COAL FOR STENOSEP ACTIVATED COAL FOR STENOSEP ACTIVATED COAL FOR STENOSEP ACTIVATED COAL FOR STENOSEP ACTIVATED COAL FOR STENOSEP ACTIVATED COAL FOR STENOSEP 120

35 Page 35 STENHØJ cyklone and condensate drain (Stenomat) Item no Type M3/min. Connection ,58 1/4" ,16 3/8" ,00 1/2" ,50 3/4" ,33 1" ,50 1 1/4" ,00 1 1/2" ,50 2" ,33 2" STENHØJ air cooled after cooler - with Stenomat Item no Type M3/min. Connection ,08 1" ,08 1" ,92 1 ½"

36 Page 36 Optinal extras Type Item no Type Item no Pressure reducing valve not including pressure gauge: Suction filters: Mini Cube K (1/2") Cube K (3/4") Cube 3 HT, 0-15 bar K20-K22-33 (1") Filter not including pressure reducing valve: Filter element for Mini Cube Filter element for Cube Filter element for Filter including pressure reducing valve Automatic water ejector: Mini Cube Float controlled water ejector Cube Timer controlled water ejector Lubricator: Connecting hose: Mini Cube mm ½" x ½" Cube mm 3/4" x 3/4" Options for Mini Cube 700 mm 1" x 1" Bush set 1/8" mm 1 1/4" x 1 1/4" Bush set 1/4" mm 1½" x 1½" Coupling set mm 2" x 2" Wall fittings Options: Pressure gauge for reduction valve Manual waterdrain valve ½" Options for Cube 3: Inspection cover for KC 3/4" Bush set 1/4" Inspection cover for KC 1 1/4" Bush set 3/8" Silencer Bush set 1/2" Relief T-piece Bush set 3/4" Non-return valve- straight 3/4" Couplings set Packing for oval inspectioncover Wall fittings Non-return valve Pressure gauge 0-25 bar* Piston cpl. For non-return valve Pressure gauge 0-25 bar** Oil for piston compressor - 1 L * Connection piece turned backwards Oil for screw compressor -10 L*** ** Connection piece turned downwards Oil for screw compressor -20 L**** Ball valve: Oil gauge glass 3/4" cpl /4" Bekomat " Vibrations damper l /4" Pressure switch 7-20 bar Safety valve: *** for old screw compressors (SP+CK and older models) Safety valve 1/2" 10,5 bar **** for new screw compressors (S) Safety valve 1/2" 15,5 bar Oil level switch: Safety valve 1/2" 17 bar K25 - K K

37 Page 37 STENHØJ KOMPRESSOR A/S Terms of Sales and Delivery Guarantee STENHØJ KOMPRESSOR A/S grants you a guarantee of 1 (one) year (from date of invoicing) on manufacturing defect (the invoice must be enclosed). The guarantee does not include freight from or to STENHØJ KOMPRESSOR A/S The guarantee is valid by replacement of STENHØJ KOMPRESSOR A/S' spare part Moreover, the following is not covered by the guarantee: Damage caused by unintended use and operation is not covered by the guarantee. Maintenance instructions and service interval must be followed as laid out in the instruction manual. Normal wear parts and ingenuine/foreign components are not covered by the guarantee. Moreover, STENHØJ KOMPRESSOR A/S does not cover further guarantee as granted by STENHØJ KOMPRESSOR A/S' suppliers. Transport damages By reception of goods please examine carefully for any freight damages before signing the consignment note. After having received the goods, all responsibility goes to receiver. That is after acceptance of goods freight damages can no longer be covered by STENHØJ KOMPRESSOR A/S. If the goods are damaged at reception, you must add written details to the consignment note. The forwarder is responsible for the goods from STENHØJ KOMPRESSOR A/S to the costumer. Moreover, You can find much more information on our website: for technical details