Management System Edition. ULTRAFLEX - Factory in Casella. UCS - UFLEX - Factory in Borgo Fornari. IL - Factory in Leivi

Transcription

1

2

3 ULTRAF - Factory in Casella UCS - UF - Factory in Borgo Fornari Management System The Ultraflex and Uflex Management Systems are certified in conformity with the UNI EN ISO 9001:2015 and UNI EN ISO 14001:2015 rules and involve all the company resources and processes starting from the design, in order to: Define and comply with the customer requirements Set up the actions to maintain and improve the quality standards constantly Pursue a continuous process improvement to meet the market needs, through research, innovation and developing prducts and processes. Maintain and verify conformity with ABYC requirements. Pursuing environmental protection, including pollution and continuous improvement aimed at environmental performance Constantly test the products to verify their conformity with the 2013/53 EU and ABYC (American Boat and Yacht Council) requirements. IL - Factory in Leivi UF USA - Factory in Sarasota Edition

4 UF 1 SELF-CONSUMPTION & ENERGY STORAGE SYSTEM SECTION 1 PAGES 5-7 Uflex - energy backup manager, hybrid stand-alone solutions page 5 Uflex - CEI-021, off-grid PV solutions with storage, mini-grid page 6 Uflex - off-grid PV soltion with DC output V page 7 2 INDE 2 PV MODUS SECTION 2 PAGES 8-15 Uflex - poly-crystalline PV modules page 8 Eurener - poly-crystalline and mono-crystalline PV modules page 9 unzel - semi-flexible PV modules page 10 Sunware - crystalline semi-flexible PV modules page 11 Uflex - brackets for UF solar panels page 12 Uflex - pole brackets for PV modules page 13 Uflex - PV mounting system for flat roof page 14 Uflex - PV modules supports for metal roofs page 15 3 ECTRICAL EQUIPMENTS SECTION 3 PAGES Morningstar - charge controllers, inverters, ground fault protection, accessories pages Goodwe - solar inverters pages Studer - charge controllers, battery chargers, inverters pages Uflex - inverters and battery chargers pages Victron Energy - charge controllers, battery chargers, inverters, combi systems pages Victron Energy - DC-DC converters, accessories, battery balancer pages Fronius - grid-connected inverters page 63 4 ECTRICAL COMPONENTS SECTION 4 PAGES BEP Marine - battery distribution switches pages BEP Marine - distribution systems pages BEP Marine - battery switches and distribution components - PRO INSTALR pages HYBRID GROUPS AND GENERATORS SECTION 5 PAGES Uflex - HyLander - the self sustainable power unit pages Uflex - HyLander HD - for hot duty environement pages WFM - land-based generators pages Uflex S.r.l. declines any liability for possible mistakes in this catalogue due to printing errors. The descriptions and guidelines shown in this catalog should be used as general reference only. For any further information please contact our Technical Service.

5 6 7 SUPERCAPACITORS AND BATTERIES SECTION 6 PAGES Kilowatt Labs - supercapacitor energy storage systems pages BYD - batteries page 92 Victron Energy - AGM Super Cycle, AGM, GEL, LI-ION batteries pages Victron Energy - BMS, Peak Power Pack pages Luminor - AGM batteries page 99 ABT - GEL batteries pages Enerpower - AGM batteries page 101 Uflex - battery boxes page 102 WIND GENERATORS SECTION 7 PAGES Primus - Air Breeze, Air Marine, Air 30 and Air 40 wind generators pages Silentwind - wind generators page 105 Superwind - wind generators page 106 Leading Edge - wind generators page 107 HYE - wind generators and hybrid charge controller pages UF INDE 8 PV SYSTEMS FOR WATER PUMPING SECTION 8 PAGES Franklin Electric - solar kits pages Shurflo - pump for PV systems for pumping water from wells page 115 Uflex - water pumps inverter page 116 Uflex - pumping system components page STAND-ALONE PV KITS AND HYBRID SYSTEMS SECTION 9 PAGES Uflex - stand-alone PV kits page 118 Uflex - monitoring kits, PV kits for caravans page 119 Uflex - solar lighting for roads, parks and gardens page 120 Uflex - solar D marine lanterns page ECTRICAL LINEAR ACTUATORS AND CONTROL PANELS SECTION 10 PAGES UCS - electrical linear actuators pages UCS - CRM control panel, accessories pages UCS - smoke ventilation control panels, accessories pages SA CONDITIONS SECTION 11 PAGE 129

6 KILOWATT LABS - SUPERCAPACITORS ENERGY STORAGE SYSTEMS pages UF - HYLANDER HD pages NEW FRANKLIN ECTRIC - FHOTON TM SOLAR KITS pages GOODWE - SOLAR INVERTERS pages 29-30

7 UF SOLUTIONS SELF-CONSUMPTION & ENERGY STORAGE SYSTEMS UF 5 UF ENERGY BACKUP MANAGER: A COMPETITIVE SOLUTION CONFIGURAB TO YOUR NEEDS n Free PV system: independent dimensioning from the characteristics of the photovoltaic system n Free Battery Pack: independence in the choice of technology and pack capacity storage batteries n UPS No Break: the solution continues to feed preferential loads even in the event of a network failure n Free Portal: integrated LAN / Wi-Fi for free use of the control and monitoring portal n It keeps a constant control of the variations of the energy flows: produced and utilized. n It works in real time on the energy exchange between the storage system and the connection point, withdrawing or injecting energy in the most appropriate way in order to guarantee the least possible energy exchange with the network, both in withdrawal and in input. n During the night it supplies power to the loads using, as much as possible, the energy produced in excess by the photovoltaic plant during the day and stored in the battery pack. HYBRID STAND-ALONE SOLUTIONS SELF-CONSUMPTION & ENERGY STORAGE SYSTEMS

8 UF CEI-021 PV SOLUTIONS WITH STORAGE Suggested to realize of PV systems in contexts where there is a stable AC network or if you want to add an energy storage solution on an already existing system. Systems can be configured with or without feed-in to the network. CEI-021 GRID CONNECTED SING-PHASE AND THREE-PHASE FROM TO PV Plant [kwp] SELF-CONSUMPTION & ENERGY STORAGE SYSTEMS OFF-GRID PHOTOVOLTAIC SOLUTIONS WITH STORAGE Suggested to realize of PV systems in contexts where there isn t the AC network or is not stable. MINI-GRID Inverter Power [kva] 3 (9) 12 (180) LiFePo Storage [useful kwh] Lead Storage [useful kwh] Supercapacitor [useful kwh] 7 70 ( ) indicates the extremes of the three-phase HYBRID CEI-021 SYSTEMS CONNECTED TO THE GRID SING-PHASE FROM PV Plant [kwp] 2 6 Inverter Power [kva] 3 5 LiFePo Storage [useful kwh] 2 75 Lead Storage [useful kwh] 2 50 Supercapacitor [useful kwh] 7 21 OFF-GRID SING-PHASE AND THREE-PHASE FROM PV Plant [kwp] 1 60 Inverter Power [kva] 1 45 Lead Storage [useful kwh] Supercapacitor [useful kwh] 7 21 OFF-GRID SING-PHASE AND THREE-PHASE WITH POWER ASSIST FROM PV Plant [kwp] Inverter Power [kva] LiFePo Storage [useful kwh] Lead Storage [useful kwh] Supercapacitor [useful kwh] 7 21 Suggested to realize PV systems in contexts where there isn t an AC network a great energy production is required. They allow to share productions points distributed along the AC network. FROM PV Plant [kwp] Inverter Power [kva] LiFePo Storage [useful kwh] Lead Storage [useful kwh] Supercapacitor [useful kwh] 7 21 TO TO TO TO

9 OFF-GRID PV SOLUTIONS WITH DC OUTPUT V POWER SUPPLY OF IMPORTANT DC LOADS FROM TO UF PV APPLICATION ON VEHICS PV Plant [Wp] Power Supply [kwh/gg] 0,6 7 LiFePo Storage [useful kwh] 0,5 7,5 Lead Storage [useful kwh] 0,5 7,5 Supercapacitor [useful kwh] 2,5 7 7 Suggested to realize small PV systems on vehicles like campers, boats, ambulances, etc., in order to charge the service and start-up batteries in the absence of the grid, even if the vehicle is stationary. PV SOLUTIONS INSTALD ON PO FOR SPECIAL APPLICATIONS MOST FREQUENT APPLICATIONS FROM PV Plant [Wp] Power Supply [kwh/gg] 0,2 2 LiFePo Storage [useful kwh] 0,5 2,5 Lead Storage [useful kwh] 0,5 2,5 Supercapacitor [useful kwh] - 2,5 These solutions allow to realize mini PV systems mounted on poles to provide the power and the management of small loads in remote areas or where you cannot or you don t want to connect the application to the grid. FROM PV Plant [Wp] Power Supply [Wh/gg]** LiFePo Storage [useful kwh] 0,05 2 Lead Storage [useful kwh] 0,05 1,5 ** values subject to the installation area PV LIGHTING FOR ROADS, PARKS, GARDENS, ETC. The use of D lighting and light flow regulation techniques allow continuous operation throughout the year. Remote monitoring and management of the solution can also be included. VIDEO SURVEILLANCE SYSTEMS The use of outdoor cameras with routers and /or low-power access points of the latest generation allows you to create video surveillance services very efficient and performing even in places where there is no electricity. MANAGEMENT AND MONITORING OF REMOTE SENSORS AND ACTUATORS TO TO SELF-CONSUMPTION & ENERGY STORAGE SYSTEMS The field of application is very wide and needs met ranging from small sensors and /or low-power actuators to more complex management systems: environmental monitoring, irrigation distribution systems, water conduit, etc

10 UF UF - POLY-CRYSTALLINE PV MODUS Uflex uses top quality materials to factory build reliable and long lasting poly-crystalline PV Modules. Uflex prime quality main components are: high efficiency cells, reflection-free and power transmitting glasses, anodized aluminium frames. Back positioned mounting holes for easy of installation. The Quality Management System is certified in compliance with ISO 9001:2008 standards. 8 PV SOLAR MODUS Solar Modules manufactured by Uflex are certified in accordance with IEC61215, IEC61215 and CE standards. Product warranty: 10 years Performance warranty: 90% for 10 years, 80% for 25 years Pmax(I) Vmp(II) Imp(III) Voc(IV) Isc(V) Dimensions Weight Model Part No. Watt Volt Amp Volt Amp mm ( ) kg (lbs) UF010PM M x350x22 (11.8x13.8x0.8) 1.2 (2.6) UF020PM P x350x22 (20.5x13.8x0.8) 2.2 (4.8) UF040PM S x665x34 (18.3x26.2x1.3) 3.9 (8.6) UF060PM W x665x34 (26.2x26.2x1.3) 5.4 (11.9) UF080PM Y x665x34 (33.1x26.2x1.3) 6.5 (14.3) UF100PM A x665x34 (44.5x26.2x1.3) 8.5 (18.7) UF120PM T x665x34 (49.6x26.2x1.3) 9.5 (20.9) UF160PM S x665x34 (58.8x26.2x1.3) 12.2 (26.9) UF160PM* D x665x34 (58.8x26.2x1.3) 12.2 (26.9) UF300PM* B x990x42 (77x39x1.6) 22.0 (48.5) *: Includes 4mm 2 solar cable with compatible MC4 connectors.

11 EURENER - POLY-CRYSTALLINE AND MONO-CRYSTALLINE PV MODUS UF n Electroluminescence tested (EL-Test) n IP m cable n High transmissivity and high resistance glass n Frame with high mechanical resistance and inner tube n Recyclable and environmentally friendly materials n Certified: IEC 61215:2005; IEC :2004 / IEC :2004; Front load (snow) Pa; Rear load (wind) Pa; Fire Resistance Certified / Class 1 (UNI 9177); MCS (R.U); EEE (France); WEEE conformity in Germany; ETL Listed Mark (USA-Canada); PID Resistance (only polycrystalline pv modules) Poly-crystalline module Mono-crystalline module 9 PV SOLAR MODUS MODELLO PEPV 270W MEPV 300W MEPV 315W Codice Part No R Y H Potenza Nominal nominale, power, Pmpp Pmpp 270 W 300 W 315 W Tolleranza, Tolerance, Pmpp ±1% ±1% +1% 12/24/36 0/+1% o 48 VDC Area Module del area modulo 30 - A 45 - A 60 1,62 A Efficienza Module efficiency del modulo 12/24/36 16,67% o 48 VDC 12/24/36 18,52% o 48 VDC 12/24/36 19,44% o 48 VDC Isc 9,12 30 A 9,89 45 A 9,95 60 A Uoc 12/24/36 38,61 o 48 V VDC 12/24/36 39,75 o 48 V VDC 12/24/36 40,50 o 48 V VDC Impp 8,61 30 A 9,37 45 A 9,82 60 A Umpp 12/24/36 31,36 o 48 V VDC 12/24/36 32,02 o 48 V VDC 12/24/36 32,08 o 48 V VDC Tensione Maximum massima voltage A V A V AV α Isc 12/24/36 0,039% o 48 / C VDC 12/24/36 0,039% o 48 / C VDC 12/24/36 0,039% o 48 / C VDC β Uoc -0,29% 30 A / C -0,29% 45 A / C -0,29% 60 A/ C γ Pmax 12/24/36-0,42% o 48 / C VDC 12/24/36-0,42% o 48 / C VDC 12/24/36-0,42% o 48 / C VDC Rango Temperature temperature range -40 C 30 to A +85 C -40 C 45 to A +85 C -40 C 60 to A+85 C NOCT 12/24/36 44 C o ± 48 2 C VDC 12/24/36 44 C o ± 48 2 C VDC 12/24/36 44 C o ± 48 2 C VDC

12 UF 10 PV SOLAR MODUS UNZEL - SEMI-FIB SOLAR PANELS The unzel solar panels are very thin (3 mm 0,12 ), light and bendable up to 30. Thanks to the innovative All-Back-Contact Technology, these solar panels supply higher power than conventional PV modules of same size. By adopting the Back-Contact technique, the wafer can be coated with flexible materials and finally forms the high efficiency flexible solar panel. These panels offer high performances also early in the morning, late in the evening and even on cloudy days. They effectively absorb different wavelengths of light to generate more electricity. Furthermore, the hotter it gets, the better is their performance compared to competitor efficiency. Designed for boat and RVs applications, for offgrid solutions (telecom, ups-backup energy, street lighting, etc.) FEATURES n Easy to install. Reasy to connect. Stainless steel rings (dia. 10 mm) n Secure and easy wiring. Includes 3 m pre-assembled solar cable n Completely waterproof and weatherproof junction box (IP65) n Design: high quality, reliability and performance. Crystalline silicon cell panels wuth patented All- Back-Contact Technology. Very thin, light and bendable up to 30 n Endurance: High quality UV resistant materials ensure a long life n Electrical Connection: Junction box mounted at the front side for protection against corrosion. The unzel solar panels are delivered with preassembled cables for a quick and safe installation Pmax Vmp Imp Voc Isc Dimensions Weight Model Part No. Watt Volt Amp Volt Amp mm ( ) kg (lbs) HD 20W H 20W x310x3 (22.8x12.2x0.12) 0,6 (1.32) HD 50W B 50W x500x3 (24.4x19.7x0.12) 1 (2.2) HD 110W D 110W x560x3 (45.5x22.1x0.12) 2,5 (5.51)

13 SUNWARE - MARINE PV SOLAR MODUS UF Sunware solar modules, without glass, are functionally reliable, robust, light-weight, weather-proof and sea-water resistant: therefore they have been specially designed for marine applications on board. The innovative manufacturing process, make them particularly suitable to be installed on the deck of the boat, avoiding vibrations and the negative effects of high temperature. Self-cleaning and safe to step-on, SUNWARE modules are easy to bend and can therefore adhere to the deck (maximum bending 3%, i.e. bending of 3 cm per 1 m long module). Each module is supplied complete with stainless steel back-plate, a sea-water proof and UV resistant cable (3 m long red/blue 2x1.5 mmq). 11 SW-20 SW-40 PV SOLAR MODUS Model Part No. Max. Power No. of Cells Nominal Voltage Imax Isc Dimensions HxWxD mm ( ) Weight kg (lbs) SW SW L A 14 Wp V 0.69 A 0.72 A 468x243x6 (18.4x9.6x0.2) 0,7 (1.5) SW SW N C 20 Wp V 0.91 A 0.96 A 643x273x6 (25.3x10.7x0.2) 1,2 (2.6) SW SW R E 25 Wp V 1.2 A 1.37 A 807x273x6 (31.8x10.7x0.2) 1,6 1,3 (3.5) (2.9) SW SW SW SW T GC Wp V A A 1154x273x6 643x273x6 (25.3x10.7x0.2) (45.4x10.7x0.2) 1,2 2,2 (2.6) (4.8) SW SW SW SW EJ 25 Wp V A A 807x273x6 426x481x6 (31.8x10.7x0.2) (16.7x18.9x0.2) 1,6 1,3 (3.5) (2.9) SW SW SW SW V CL Wp V A A 643x273x6 599x481x6 (25.3x10.7x0.2) (23.6x18.9x0.2) 1,2 1,8 (2.6) (4) SW SW SW SW V NE Wp V A A 807x273x6 772x481x6 (31.8x10.7x0.2) (30.4x18.9x0.2) 1,6 2,3 (3.5) (5.1) SW SW SW SW V CR Wp V A A 643x273x6 1119x481x6 (25.3x10.7x0.2) (44x18.9x0.2) 1,2 3,6 (2.6) (8) SW SW SW SW K VE Wp V A A 1012x689x6 807x273x6 (31.8x10.7x0.2) (39.8x27.1x0.2) 4,7 1,6 (10.4) (3.5) ACCESSORIES MID CLIPS AND SIDE CLIPS - Part No H (2 clips) - Part No K (4 clips) PLUGS, SOCKETS AND CONNECTORS - Male Socket: Part No R - Female Socket: Part No T - Plug: Part No V - Bulkhead kit: Part No Z - Bulkhead Connector: Part No

14 UF UF - PO OR VERTICAL BRACKETS FOR UF SOLAR PANELS PO BRACKET FOR 10W AND 20W UF SOLAR PANELS Z It includes bolts, screws and washers to fix the module on the structure. It can be installed on poles up to 40 mm diameter. 12 SUPPORTS FOR PV MODUS PO BRACKET FOR UF SOLAR PANELS FROM 40W TO 100W L Galvanized steel structure. It includes one adjustable inclination bracket with fixing accessories. It can be installed on poles up to 60 mm of diameter. Supplied with aluminium bars and module fixing accessories. PO BRACKET FOR UF SOLAR PANELS FROM 100W TO 160W S Galvanized steel structure. It includes one adjustable inclination bracket with fixing accessories. It can be installed on poles up to 90 mm of diameter. Supplied with aluminium bars and module fixing accessories. PO BRACKET FOR UF SOLAR PANELS UP TO 300W H Galvanized steel structure, painted with polymerizing powder at 200 C, after phosphating. Supplied with adjustable screw connection to be installed on poles up to 89 mm diameter. Structure able to support: n 1x Uflex module from 100W to 300W n 2x Uflex modules from 80W to 150W Pole bracket for 10W and 20W UF PV modules Pole bracket for 100W and 160W UF PV modules Pole bracket for UF PV modules up to 300W SUPPORTS FOR PV MODUS Roof fixing supports for photovoltaic modules in plastic material. Suitable for any photovoltaic module with aluminum frame. To fix the single module you need 4 corner supports. The supports must be fixed to the roof safely by using appropriate glue. However, it is always recommended to reinforce the fixation with screws. Dimensions Weight Model Part No. mm ( ) kg (lbs) KFP440/ M 465 x 65 x 73 (18.3 x 2.6 x 2.9) 0.9 (2.0) KFP530/ Z 555 x 65 x 73 (21.8 x 2.6 x 2.9) 1.1 (2.4) KFP650/ B 660 x 65 x 73 (26.0 x 2.6 x 2.9) 1.4 (3.1)

15 UF - PO BRACKETS FOR PV SOLAR PANELS BATTERIES AND CHARGE CONTROLR They are designed to be functional, robust and easy to install. Painted galvanized iron structure (20/10) for a longer durability. n Adjustable, for poles with 114 mm of maximum diameter. n Resistant to strong wind n Closed battery case with ventilation slots and thermal insulation supports. n Predisposto per kit di fissaggio eolico UF 13 KIT BO + PAIR BRACKETS Y OPTIONAL WIND KIT L n Note: mounting rails are not included KIT FOR PV MODUS MOUNTING RAIL KIT FOR ONE SOLAR PANEL UP TO 160 W N n 2 mounting rails 750 mm n 4 end clamps n 4 brackets n 4 screws + 4 nuts/washers MOUNTING RAIL KIT FOR ONE SOLAR PANEL OVER 160 W R n 2 mounting rails 1200 mm n 4 end clamps n 4 brackets n 4 screws + 4 nuts/washers MOUNTING RAIL KIT FOR TWO SOLAR PANELS UP TO 160 W T n 2 mounting rails 1500 mm n 4 end clamps n 4 middle clamps n 4 brackets n 4 screws + 4 nuts/washers mm L mm V mm N END CLAMP V SUPPORTS FOR PV MODUS BRACKET F MIDD CLAMP T ACCESSORIES Roof gland Roof gland boxes Cable-conduits KT1-10 Part No G KT1-20 Part No J KT5 Part No U KT5-C10 Part No W KT5-C20 Part No Y SOLAR CABS 6 mm 2 cable with pre-assembed MC4 connectors: 3 m cable Y 5 m cable C 6 mm diameter black cable D sold per meter 6 mm diameter red cable F sold per meter 10 m cable E 20 m cable N MC4 male connector D MC4 female connector B MC3 male connector P MC3 female connector M

16 UF UF - PV MOUNTING SYSTEM FOR FLAT ROOFS 14 SUPPORTS FOR PV MODUS CONSO PLUS - PV MOUNTING SYSTEM n Suitable for flat roofs with max 5 slope. No drilling and no damage on roof n PV panels dimensions: mm height, mm width n Suitable for areas with wind load up to 4 and snow load of up to 3 (DIN 1055 compliant) n Also suitable for ground installations, landfills, rocky undergrounds and conversion sites n Aerodynamic version support angle at 15 with wind deflector n Wind load tested and determined according to Eurocode 1 - influence on load-bearing structures EN :200 n 100% recycled polyethylene, chlorinefree (HDPE), sturdy, durable and weather resistant n Complies with fire prevention measures according to DIN 4102 class B2 n TÜV certified n WARRANTY: 10 years MGS-B (BASE KIT) The base-kit MGS-B hold 12 PV modules and need 19 m 2 of free space only. MGS-B KIT A MGS-A8 (ADD-ON KIT) The add-on kit MGS-A8 is docked and extends the MGS-B base-kit by 8 PV modules. The MGS-A8 need approx. 13 m 2 of free space. PV modules are being installed in landscape and are fixed from below. MGS-A8 KIT C MGS-A12 (ADD-ON KIT) Expands the ground mount system by 12 PV-modules. The MGS-A12 needs approx. 19 m 2 of free space. MGS-A12 KIT E

17 UF - PV MODU SUPPORTS FOR METAL ROOFS UF 15 METASO PV MOUNTING SYSTEM MS+/MS+P Mounting solution MetaSole enables fast and inexpensive installation of framed modules on roofing featuring corrugated metal sheets having a thickness between 0.40 mm and 1.00 mm. Only four different components are required for the direct installation of the modules: a clamp base with optimised weight, two thin sheet metal screws with special coating, one end clamp, and one middle clamp. The screw with a crowding tip makes pilot drilling unnecessary, which results in extremely short mounting time. MS+ horizontal modules MS+P vertical modules SEMI-INTEGRATED PV MODU SUPPORT FOR SLOPING ROOFS SUPPORTS FOR PV MODUS VARIOSO MOUNTING SYSTEM The VarioSole is suitable for all roofing types, framed PV modules featuring a thickness between 34 and 50 mm and, thanks to height-adjustable mounting elements, even for unlevelled roofs. The installation of the few, partially already pre-assembled components is easy and fast. VarioSole is a rail system that is mounted on the rafters with special roof hooks. All that is usually necessary for the installation is to remove or slide up single tiles. Removing the entire roof covering is therefore not required. The roof hooks are made of extremely resilient, yet at the same time light aluminium diecast. Due to their design, the roof hooks are especially rigid and stable. The rails that then fasten the modules in place with module clamps are mounted on these hooks.

18 UF 16 MPPT CHARGE CONTROLRS MORNINGSTAR - MPPT 600V CHARGE CONTROLRS TRISTAR MPPT 600V The TriStar MPPT 600V charge controller accepts PV array or wind turbine input up to 600 Voc. It features an advanced digital signal processor and utilizes Morningstar s TrakStar MPPT Technology to harvest the maximum available energy from the solar array s or wind turbine s peak power point within the controller s operating range. This high speed processing technology and control methodology enable the TriStar MPPT 600V charge controller to sweep from the array s or wind turbine s Voc to the battery voltage faster than any competing MPPT controller on the market - in less than one tenth of a second! The TriStar MPPT 600V charge controller s high voltage capability and flexible design also make several typical application scenarios possible: n Off-grid PV systems greater than 150 Voc with long wire runs from the array to the controller n New installation grid-tie PV systems with battery back-up n Retrofitting string PV inverter systems to later add battery back-up without changing the PV array configuration n Battery-based Wind systems FEATURES n Delivers the industry s best-in-class power efficiency n Uses Morningstar s advanced 4-stage charging algorithm to optimize battery health n Features extensive system networking, monitoring and communications n Is optimized for harsh environments and equipped with extensive electronic protections n Offers superior lightning protection n Engineered with a robust thermal and mechanical design to deliver the highest reliability and excellent performance MODEL TS-MPPT V TS-MPPT V-GDB Part No F H Maximum battery current 60 A 60 A Maximum input current 15 A 15 A Nominal solar input 3200 Wp 3200 Wp Maximum open circuit voltage 600 V 600 V Nominal system voltage 48 VDC 48 VDC Self-consumption W W Charging algorithm 4 stage 4 stage Dimensions cm ( ) 39.2 x 22.1 x 14.9 (15.4 x 8.7 x 5.9) 54.2 x 22.1 x 14.9 (21.4 x 8.7 x 5.9) Weight kg (lbs) 9.0 (19.8) 12.8 (28.1)

19 MORNINGSTAR - MPPT CHARGE CONTROLRS UF TRISTAR MPPT Morningstar s TriStar MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. n Maximizes the energy harvest from the PV by rapidly finding the solar array peak power point n Peak efficiency of 99% n Extensive Networking and Communications Capabilities: Enables system monitoring, data logging and adjustability. Ethernet included n Remote Temperature Sensor is included n Display: to be ordered separately n Temperature range: -40 C to +45 C n Max. Wire Size: 35 mm² / 2 AWG n Dimensions: 29,1 x 13,0 x 14,2 cm 5.6 ) n Weight: 4,2 kg (9.3 lbs) (11.5 x 5.1 x n Certifications: CE, ETL Listed (UL1741), cetl (CSA C22.2 No ), FCC Class B Part 15 Compliant, Complies with NEC U.S. National Electric Code n WARRANTY: 5 years 17 MPPT CHARGE CONTROLRS TRISTAR MPPT TS-MPPT-30 TS-MPPT-45 TS-MPPT-60 Part No H V C Maximum charging current 30 A 45 A 60 A Nominal 400 Wp 600 Wp 800 Wp solar input 800 Wp 1200 Wp 1600 Wp 1600 Wp 2400 Wp 3200 Wp Maximum open circuit voltage 150 V 150 V 150 V System voltage 12/24/36 or 48 VDC 12/24/36 or 48 VDC 12/24/36 or 48 VDC Options TriStar Meter-2 indicator yes yes yes TriStar-Meter-2 remote indicator yes yes yes MeterHub yes yes yes EIA-485 adapter yes yes standard

20 UF 18 MPPT CHARGE CONTROLRS MORNINGSTAR - MPPT CHARGE CONTROLRS PROSTAR PS MPPT The Prostar MPPT solar charge controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 1100 watts. This controller allows two modules in series on a 12V battery system and two or three modules in series on a 24V battery system. Detailed battery programming options allow for advanced battery support for the latest Lithium, Nickel Cadmium, and Lead Acid battery types. n High reliability: conformally coated circuit board and corrosion resistant terminals n Maximizes energy harvest: using TRAKSTAR MPPT technology to determine and adjust to the true maximum power point as insolation changes throughout the day n Data logging: detailed logging of power and load data confirms performance and helps isolate system inconsistencies n Automatic PV Based Lighting Control: multievent load control enables powerful options for PV lighting systems and settings can easily be adjusted in the field n Modbus communications: Solar Industry Standard MODBUS communications protocol allows for easy programming, control, remote data access and charge synchronization with other system hardware n High strength: Polycarbonate Case and extruded aluminum heatsink n Self diagnostic: The ProStar MPPT continuously monitors and reports any internal hardware issues or system problems through its status D s, optional display or communication port n Dimensions: 20 x 17 x 7 cm (20 x 28 x 8.2 cm with optional box) n Weight: 1,4 kg (1,8 kg with optional box) n Temperature range: -40 C to +60 C n Certifications: CE; RoHS; UL1741/CSA.107.1; UL 62109; IEC 62109; FCC Part- 15 class B compliant n Wire Box: to reduce hazards associated with exposed wires and connections. It can be purchased separately WIRE BO MODEL PS-MPPT-25 PS-MPPT-40 Part No D F Max PV open circuit voltage 120 A 120 A Max battery current 25 A 40 A Load current rating 25 A 30 A Nominal battery voltage 12 or 24 V 12 or 24 V Nominal max operating power 350W (12V), 700W (24V) 550W (12V), 1100W (24V) Self-consumption 0,6W (max 1W) 0,6W (max 1W)

21 MORNINGSTAR - MPPT CHARGE CONTROLRS UF SUNSAVER MPPT Morningstar s SunSaver MPPT solar controller with TrakStar Technology is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 400Wp. n Maximizes the energy harvest from the PV by rapidly finding the solar array peak power point n Use of high Voltage Modules: Enables the use of high voltage and thin film modules for off-grid battery charging n Converts 24V to 12V: allows you to use a solar power system 24V to charge a 12V battery, reducing power losses due to a long connection cable between the solar system and the battery n Automatic Lighting Control: Up to four programmable timer sequences for PV lighting applications n Temperature range: -40 C to +60 C n Max. Wire Size: 16 mm² / 6 AWG n Dimensions: 16,8 x 5,5x 7,0 cm (6.6 x 2.2 x 2.8 ) n Weight: 0,6 kg (1.2 lbs) n Certifications: CE, UL1741, CSA C22.2 No recognized component n WARRANTY: 5 years 19 MPPT CHARGE CONTROLRS SUNSAVER MPPT SS-MPPT-15L Part No Y Maximum charging current 15 A Nominal solar input 200 Wp (battery 12 V) Wp (battery 24 V) Maximum open circuit voltage 75 V System voltage 12/24 VDC Options Remote indicator yes Temperature remote sensor yes MaterHub yes PC Meterbus adapter yes DIN Rail Clips yes

22 UF MORNINGSTAR - PWM CHARGE CONTROLRS TRISTAR Morningstar s TriStar is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. 20 PWM CHARGE CONTROLRS n Highest reliability: Large heat sink and conservative design enables operating at full ratings to 45 C n More information: 3 Ds to o indicate status, faults and alarms. Optional meter displays extensive system and controller information, automatic self-test and reset capabilities n Communications capability: RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control n Full adjustable: DIP switch provides user with a choice of 7 different digital presets and custom settings via RS-232 n Extensive Electronic Protections: Fully protected against reverse polarity, short circuit, overcurrent, high temperature and overvoltage n Display: to be ordered separately n Temperature range: -40 C to +45 C n Largest Wire: 35 mm² / 2 AWG n Dimensions: 26,0 x 12,7 x 7,1 cm (10.2 x 5 x 2.8 ) n Weight: 1,6 kg (3.5 lbs) n Certifications: CE, ETL Listed (UL1741). n WARRANTY: 5 years PROSTAR Morningstar s ProStar is the world s leading mid-range solar controller for both professional and consumer applications. n Increased battery capacity and life: PWM series battery charging. Temperature compensated charging and 3-position battery select. Remote battery voltage sense terminals n More information: 3 Ds to indicate status, faults and alarms. An optional instrument provides safety disconnection and indicates Amps, Volts, temperature, and self-diagnostics n Electronic Protections: Reverse polarity, Short-circuit, Overload, High temperature disconnect, High voltage disconnect n Temperature range: -40 C to +60 C n Largest wire: 16 mm² / 6 AWG n Dimensions: 15,3 x 10,5 x 5,5 cm (6.0 x 4.1 x 2.2 ) n Weight: 0,34 kg (0.75 lbs) n Certifications: CE n WARRANTY: 5 years TRISTAR TS-45 TS-60 Part No J L Rated solar, load or diversion current 45 A 60 A System voltage VDC VDC Options TriStar Meter-2 indicator yes yes TriStar Meter-2 remote indicator yes yes Temperature remote sensor yes yes MeterHub yes yes EIA-485 adapter yes yes PROSTAR PS-15M PS-30M PS-15M-48V Part No W A H Rated solar current 15 A 30 A 15 A Rated load current* 15 A 30 A 15 A System voltage 12/24 VDC 12/24 VDC 48 VDC Options Digital indicator yes yes standard Positive pole earth no yes yes Temperature remote sensor yes yes yes * Low voltage disconnect included on all ProStar controllers.

23 MORNINGSTAR - PWM CHARGE CONTROLRS SUNSAVER (GEN3) Morningstar s SunSaver is the world s leading small solar controller for both professional and consumer applications. UF n Increased battery life: PWM to manage four-stage battery charging with temperature compensation. Possibility to select sealed or liquid batteries n Environmental protection: Marine rated terminals/anodized case aginst marine corrosion n Rated for Hazardous Locations: Specifically designed for solar power systems in the oil/ gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D n New features: complete electronic protections, 3 Ds for battry chargoing status, recovery of the battery, maximum load: 15V n Temperature range: -40 C to +60 C n Largest Wire: 16 mm² / 6 AWG n Dimensions: 15,2 x 5,5 x 3,4 cm (6.0 x 2.2 x 1.3 ) n Weight: 0,23 kg (0.5 lbs) n Certifications: CE, CE, ETL Listed (UL1741), CSA C22.2 No , FCC Class B Part 15, Hazardous Locations.. n WARRANTY: 5 years SUNSAVER DUO Morningstar s SunSaver DUO is an advanced PWM two battery controller for RV s, caravans, boats and cottages. n Two Battery Charging: Solar charge current is shared between the two batteries based on a user selectable priority. When one battery is fully charged, all of the charge current flows to the other battery n High reliable: Epoxy encapsulation protects the controller against dust and high humidity. Electronic protections: solar short circuit, solar over current and reverse polarity n User adjustable: trough a DIP switch, the user may change controller s parameters. Further customization is possible by connecting to a computer using the PC software Morningstar n Temperature range: -40 C to +45 C n Largest wire: 16 mm² / 6 AWG n Dimensions: 17,0 x 5,6 x 4,1 cm (6.7 x 2.2 x 1.6 ) n Weight: 0,26 kg (0.6 lbs) n Certifications: CE n WARRANTY: 5 years SUNSAVER TM Part No, Rated solar current Rated load current SUNSAVER DUO Part No. Rated solar current Rated output current* Sytem voltage Options Remote indicator Temperature remote sensor Meterbus PC adapter DIN Rail Clips SS-6L E 6,5 A 6 A SS B 10 A 10 A SS-10L A 10 A * There is no load connection on the SunSaver Duo SS-20L U 20 A 20 A SSD-25RM C 25 A none 12 V included yes yes yes SS-10L L 10 A 10 A SS-20L A System voltage 12 V 12 V 12 V 12 V 24 V 24 V Options* Low voltage disconnect yes 20 A 20 A no yes yes yes yes DIN Rail Clips yes yes yes yes yes yes *The wire end cover is included in all SunSaver models 21 PWM CHARGE CONTROLRS

24 UF 22 PWM CHARGE CONTROLRS MORNINGSTAR - PWM CHARGE CONTROLRS SUNKEEPER By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. n High Reliability: Rated to 70 C to operate in high temperatures at the solar module. No need to re-rate n Outdoor Rated: ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box n Rated for Hazardous Locations: Specifically designed for solar power systems in the oil/ gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D n Temperature range: -40 C to +70 C n Wire terminations: 8 fork connectors n Dimensions: 9,9 x 5,1 x 1,3 cm (3.9 x 2.0 x 0.5 ) n Weight: 0,11 kg (0.24 lbs) n Certifications: CE, Hazardous Locations. n WARRANTY: 5 years SUNLIGHT Morningstar s SunLight solar lighting controller combines the SunSaver design with an advanced microcontroller for automatic lighting control functions. n 10 lighting options: User adjustable lighting for 2 to 10 hours or overnight. The unique feature ON / OFF / ON allows you to preserve energy and still illuminate for 1 or 2 hours before dawn. The accuracy of the timer is within 2 seconds n Easy to install: Test button flashes red D to confirm correct rotary switch selection n Designed to be durable: electronics encapsulated in an epoxy compound, terminals classified as marine and housing in anodized aluminum n Temperature range: -40 C to +60 C n Largest wire: 16 mm² / 6 AWG n Dimensions: 16,8 x 5,5 x 3,4 cm (6.6 x 2.2 x 1.3 ) n Weight: 0,26 kg (0.6 lbs)q n Certifications: CE n WARRANTY: 5 years SUNKEEPER SK-6 SK-12 Part No M O Rated solar current 6 A 12 A Rated load current* none none System voltage 12 V 12 V Options Temperature remote sensor optional (RTS) optional (RTS) * There is no load connection on the SunKeeper SUNLIGHT SL-10L-12V SL-10L-24V SL-20L-12V SL-20L-24V Part No D W W C Rated solar current 10 A 10 A 20 A 20 A Rated load current* 10 A 10 A 20 A 20 A System voltage 12 V 24 V 12 V 24 V Options DIN Rail Clips yes yes yes yes * Low voltage disconnect is inculded in all SunLight controllers

25 MORNINGSTAR - PWM CHARGE CONTROLRS SUNGUARD Morningstar s SunGuard is the most advanced small, economical solar charge controller on the market today. UF n Highly reliable: Epoxy encapsulation protects the controller against dust and high humidity. Rated for 25% overloads and no need to derate n Increases battery life: PWM to manage with no shunt battery charging with temperature compensation. Low power consumption n Easy to install: waterproof connections to the PV modules and battery n Temperature range: -40 C to +60 C n Dimensions: 6,4 x 5,1 x 3,8 cm (2.5 x 2.0 x 1.5 ) n Weight: 0,09 kg (0.2 lbs) n Certifications: CE, Hazardous Locations. n WARRANTY: 5 years SHS Morningstar s SHS controller was specifically designed to meet the needs of rural solar home systems. n High reliability: The SHS has builtin electronic fuses that do not require replacement. Any wiring mistakes during installation will not damage the controller. The SHS electronics are protected with a moisture-tight coating, minimizing damage from humidity and from nesting insects n Easy to install: Ds display status information and battery level. The SHS controller is fully automatic and requires no adjustments or user selections n Automatic Lighting Control: Automatically turns light on at dusk and turns light off at dawn n Temperature range: 25 C to +50 C n Largest wire: 6 mm² n Dimensions: 15,1x 6,6 x 3,6 cm (5.9 x 2.6 x 1.4 ) n Weight: 113 g (0.24 lbs) n Certifications: CE, World Bank n WARRANTY: 5 years SUNGUARD SG-4 Part No P Rated solar current 4,5A Rated load current* none System voltage 12V *There is no load connection on the SunGuard SHS SHS-6 SHS-10 Part No W Y Rated solar current 6 A 10 A Rated load current* 6 A 10 A System voltage 12 V 12 V Options Night Light yes yes * Low voltage disconnect is included on all SHS controllers 23 PWM CHARGE CONTROLRS - INVERTER

26 UF 24 MPPT CHARGE CONTROLRS MORNINGSTAR MPPT CHARGE CONTROLRS ECOBOOST The EcoBoost MPPT solar charge controller brings Morningstar s proprietary TrakStarTechnology to our new line of Essentials controllers and accessories. The EcoBoost controllers automatically detect 12 or 24 V system configuration. They are highly efficient and accurate controllers designed to ensure that batteries attain a complete state of charge. They are also sophisticated load controllers. Using this feature to manage DC power consumption protects the batteries from over discharge and helps ensure long term system reliability. n 7 battery types: with the possibility of customization n 2 USB input: to charge smartphones and tablets - 3A at 5V n Solar input electronic protection: overload, short-circuit, high voltage, reverse polarity, high temperature, nighttime reverse current. n Load output electronic protection: overload, short-circuit, high temperature, reverse polarity. n Battery electronic protection: reverse polarity. n Load control: Low Voltage Disconnect and Low Voltage Reconnect settings. n Lighting control: dusk and dawn settings n Optional Meter: provides access to system operational information including current and historical performance data. All EcoBoost M controllers include the meter n Operating temperature: -40 C to +60 C n Tropicalization: conformal coating, marine-rated terminals n Power terminals: 2,5-16 mm 2 / 14-2AWG n Enclosure: IP20 n Dimensions: 19,6x17,3x7,1 cm (7.7x6.8x2.8 in) n Weight: 1,4 kg (3.1 lbs) n Certifications: CE, TUV Listed, IEC 62109, EN , Emissions , Immunity n WARRANTY: 2 years n Accessories: Remote Temperature Sensor (RTS), mobile phone holder (included) MODEL EB-MPPT-20 EB-MPPT-20 -M EB-MPPT-30 EB-MPPT-30-M EB-MPPT-40 EB-MPPT-40-M Part No A L C N E R Max battery current 20 A 20 A 30 A 30 A 40 A 40 A Load current rating 20 A 20 A 30 A 30 A 40 A 40 A Maximum PV Open Circuit Voltage (VOC) Nominal battery voltage Max nominal operation power* *Input power can exceed nominal maximum operating power, but controller will limit and provide its rated continuous maximum output current into batteries. This will not harm the controller. 120 V 12 or 24 V automatic sensing setting 12 V battery 40C 40C 40C 40C 40C 40C 24 V battery 40C 40C 40C 40C 40C 40C Battery voltage range Self-consumption Maximum combined USB charging output 10/35 V <1.2 Watts 3 at 5 V

27 MORNINGSTAR PWM CHARGE CONTROLRS ECOPULSE The EcoPulse is a pulse width modulation (PWM) solar charge controller within Morningstar Essential Series of products which provides essential offgrid battery regulation functions. This controller is easy to use, and designed for residential and leisure consumer applications. Metered an non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24V battert systems. n 4-Stage charging: bulk, Absorption, Float, Equalize. n Solar input electronic protection: overload, short-circuit, high voltage, reverse polarity, high temperature, nighttime reverse current. n Load output electronic protection: overload, short-circuit, high temperature, reverse polarity. n Battery electronic protection: reverse polarity. n Load control: Low Voltage Disconnect and Low Voltage Reconnect settings. n Lighting control: dusk to dawn settings. n Optional Meter: provides access to system operational information including current and historical performance data. All EcoBoost M controllers include the meter n Operating temperature: -40 C to +45 C n Tropicalization: conformal coating, marine-rated terminals n Power terminals: 2,5-16 mm 2 / 14-6AWG n Enclosure: IP20 n Dimensions: 15,3x10,5x5,5 cm (6x4.1x2.2 in) n Weight: 0,4 kg (1 lbs) n Certifications: CE n WARRANTY: 2 years n Accessories: Remote Temperature Sensor (RTS) UF 25 PWM CHARGE CONTROLRS MODEL EC-10 EC-10M EC-20 EC-20M EC-30 EC-30M Part No J T V Z B Display No Yes Yes Yes Yes Yes Maximum PV open-circuit voltage 60 V 60 V 60 V 60 V 60 V 60 V Maximum battery current 10 A 10 A 20 A 20 A 30 A 30 A Nominal battery voltage 12/24 VDC 12/24 VDC 12/24 VDC 12/24 VDC 12/24 VDC 12/24 VDC Battery voltage range 10/35 VDC 10/35 VDC 10/35 VDC 10/35 VDC 10/35 VDC 10/35 VDC Self-consumption <22mA <40mA <22mA <40mA <22mA <40mA

28 UF MORNINGSTAR GFPD - GROUND FAULT PROTECTION GFPD Morningstar s Ground Fault Protection Device (GFPD) is an innovation for ground fault detection and interruption for the photovoltaic (PV) industry. It has greater sensitivity and better isolation while maintaining the bond to earth ground. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. 26 ACCESSORIES FOR MORNINGSTAR PRODUCTS n Simple and Flexible Installation: siden or below flush mounting with coupling hardware included. Includes fused battery cable for power. Compatible with other supplier s PV controllers and inverters. For positive or negative grounded PV systems n Greater Sensitivity: more precise than fused ground fault protection, it activates starting at 300mA compared to 1A for alternative solutions n Mantains the bond to earth ground: normally grounded components (conductors, controller, battery and DC loads) will not be left floating n No fuses: avoids problematic replacements of fuses, which are often unavailable at remote sites. Uses high quality breaker switches that continue to operate after ground fault interruptions n Safety features: breaks the connection to the PV array during a fault condition. It leaves the battery and DC loads grounded under all conditions. Alternative ground fault solutions require a warning label on the battery to note that dangerous voltage are present n Better isolation: disconnects both the positive and negative conductor. Completely isolates the ground fault the controller, battery and loads n Supports both single controller and multiple controller systems: will only shut off affected controllers while maintaining the system earth bond. All loads will continue to operate safely with the battery remaining bonded to the ground n Certifications: CE, RoHS and REACH; UL 1741 and CSA C22.2 No ; GFPD- 150V (UL-489); GFPD-600V (UL-1077); Meets EMC directives; FCC Class B Part 15 compliant; NEC compliant; Manufactured in a certified ISO 9001 facility GFPD 150V 600V Part No K M Maximum solar voltage (Voc) 150 V 600 V Maximum solar current 60 A 50 A Nominal system voltage V V Self-consumption < 0,5 W < 0,5 W Ground fault threshold current 300 ma ± 10% 300 ma ± 10% Operating temperature -40 C +50 C -40 C +50 C Dimensions mm ( ) 269x128x x221x106 (10.6x5x4.4) (14.4x8.7x4.2) Weight kg (lbs) 2 (4.4) 4,4 (8.8) MORNINGSTAR PURE SINE WAVE INVERTER SURESINE SureSine is a pure sine wave inverter designed specifically for remote off-grid photovoltaic systems. It is an ideal inverter for rural electrification projects, telecom, remote cabins and weekend homes, and RV or caravans and boats. n Temperature range: -40 C to +45 C n Largest wire: 35 mm² / 2 AWG n Dimensions: 21,3 x 15,2 x 10,5 cm (8.4 x 6.0 x 4.1 ) n Weight: 4,5 kg (9.9 lbs) n RM Y - Digital display n Certifications: CE, UL, cul n WARRANTY: 2 years RM-1 SURESINE SI-300 Part No N Continuous power 300Watt@ 25 C Peak power (10 minutes) 600Watt@ 25 C DC input voltage V

29 MORNINGSTAR - ACCESSORIES FOR CHARGE CONTROLRS TS-M-2-600V P - TRISTAR METER-2 Digital display for TriStar MPPT 600V charge controllers Compatibility: TriStar TriStar MPPT n 2 x 6 character LCD n to be mounted on the controller n displays system and controller information, legged data, bar graph metering, alarms and faults n the information may be shown in five languages TS-M E - TRISTAR METER-2 Digital display for TriStar charge controllers Compatibility: TriStar TriStar MPPT n 2 x 6 character LCD n to be mounted on the controller n displays system and controller information, legged data, bar graph metering, alarms and faults n the information may be shown in five languages TS-RM D - TRISTAR REMOTE METER-2 Remote digital display for TriStar charge controllers Compatibility: TriStar TriStar MPPT n same features of TS-M-2. It includes 30 m cable for remote mounting RD M - RELAY DRIVER Logic module accessory for solar controllers Compatibility: TriStar TriStar MPPT All other charge controllers n four independent relay driver outputs by reading digital data inputs n uhigh and low alarm contacts, load control, generator start functions n displays digital data by TriStar or TriStar MPPT n displays battery voltage even with other charge controllers 27 UF ACCESSORIES FOR MORNINGSTAR PRODUCTS HUB B - METERHUB Solar controller communication hub Compatibility: TriStar, TriStar MPPT TriStar Meter-2, TriStar Remote Meter-2, SunSaver MPPT, Relay Driver n allows multiple Morningstar products to communicate over a Meterbus network (max 5 devices) n enables multiple controllers to share a single TriStar meter and a Relay Driver n the product electrically isolates devices that supply power to the network RTS D - REMOTE TEMPERATURE SENSOR measures temperature at the battery Compatibility: TriStar, TriStar MPPT ProStar, Sunkeeper SunSaver Duo SunSaver MPPT n improves battery charging thanks to very accurate temperature compensation accuratamente la temperatura della batteria n use of the RTS is recommended whenever the temperature at the battery will be more than 5 C (9 F) different than the temperature at the controller

30 UF MORNINGSTAR - ACCESSORIES FOR CHARGE CONTROLRS MSC P - PC METERBUS ADAPTER Converts a controller s meter port RJ-11to a standard RS-232 Compatibility: SunSaver Duo SunSaver MPPT 28 ACCESSORIES FOR MORNINGSTAR PRODUCTS n used to connect any Morningstar controller or inverter to a PC or other equipment n establishing a communications link enables the monitoring or logging of data from the controller or inverter as well as the customizing of any useradjustable settings n to be used with Morningstar devices with RJ-11 input (not RS-232) UMC D - METERBUS ADAPTER Converts a controller s meter port RJ-11to a standard USB 2.0 Compatibility: SunSaver Duo SunSaver MPPT n used to connect any Morningstar controller or inverter to a PC or other equipment n establishing a communications link enables the monitoring or logging of data from the controller or inverter as well as the customizing of any useradjustable settings n to be used with Morningstar devices with RJ-11 input (not RS-232) EMC A - ETHERNET METERBUS CONVERTER - Internet Data transfer device Compatibility: Tristar MPPT, Tristar PWM, Prostar MPPT, Sunsaver DUO, Sunsaver MPPT, Suresine Inverter n it adds network data funtionality to any Morningstar controller that features an exisisting MeterBus port n adds IP based MODBUS connectivity for remote communication and control n adds SNMP and notifications for system status changes RSC A - EIA-485 / RS-232 ADAPTER converts a controller RS-232 to EIA-485 Compatibility: TriStar TriStar MPPT Relay driver n allows up to 128 Morningstar products to communicate on the same communication bus and over much greater distances n all data is transmitted in the form of MODBUS protocol DIN C - DIN RAIL CLIPS to install SunSaver family of solar charge controllers to DIN Rails Compatibility: SunSaver SunLight SunSaver Duo SunSaver MPPT n these rugged plastic clips have been custom made to match the mounting holes on the SunSaver controllers n the clips also provide a mechanism to allow easy removal of the controller from the DIN rail without removing the clips

31 GOODWE - SOLAR INVERTER 3.0/3.6/5.0 KW EM SERIES HYBRID INVERTER n Charge controller and inverter integrated n Intelligent battery management function n Capable of being grid-interactive or grid-independent n Compatible with both lead-acid and li-ion battery n More security and performance n IP65 dust-proof and water-proof rating n Monitoring inverters freely via internet or mobile phone n Fanless low-noise design n Integrated protection: residual current monitoring unit, anti-islanding, DC switch (PV), AC over current protection, insulation monitoring n Ambient temperature range: C n Relative humidity: 0 95% n Maximum operating altitude: 4000 m n Cooling: natural convection n Noise emision: 25 db n Display: D and APP n BMS communication: RS485; CAN n Counter communication: RS485 n Portal communication: Wi-Fi n Mounting: wall bracket n Standby self-consumption: <13 W n Type: high frequency isolation n Certifications & Standards: AS4777.2; G83/G100; CEI 0-21 VDE4105-AR-N; VDE ; EN50438; IEC & 2, IEC ; EN ; EN ; EN ; EN UF 29 SOLAR INVERTER MODEL GW3048-EM GW3648-EM GW5048-EM Part No M P S Battery nominal voltage (V) Max. charge voltage (V) 60 (configurable) 60 (configurable) 60 (configurable) Max. voltage DC (A) Max. DC input power (W) MPPT voltage range (V) Minimum start-up voltage (V) (200 without batteries) Max. charge current (A) Max. discharge current (A) Battery capacity (Ah) Nominal AC power (W) *5 Max. AC current to the grid (A) 13, ,8 *6 Max. AC current from the grid (A) 23,6 23,6 23,6 Power factor 1 (adaptive from 0,8 in advance to 0,8 in delay) Peak power (VA) 3500, 10 sec 3500, 10 sec 3500, 10 sec Automatic switching time (ms) *10: *10: *10: Nominal voltage (V) 230 (±2%) 230 (±2%) 230 (±2%) Nominal frequency (Hz) 50/60 (±0,2%) 50/60 (±0,2%) 50/60 (±0,2%) Max. current (A) Max. efficiency <97,6% <97,6% <97,6% Dimensions mm ( ) WxHxD 347x432x175 (13.7x17x6.9) 347x432x175 (13.7x17x6.9) 347x432x175 (13.7x17x6.9) Weight kg (lbs) 16 (36.3) 17 (37.5) 17 (37.5)

32 UF 30 SOLAR INVERTER GOODWE - SOLAR INVERTER SBP SERIES - AC 3.6/5.0 KW RETROFIT SOLUTIONS n Fanless low-noise design, noise level: <25dB n IP65 dust-proof and water-proof, suitable outdoor work n Maximum charge and discharge is up to 100 A n Automatic backup function, automatic switch time less than 10ms n Total harmonic voltage distortion below 3% with inductuve load n Compatible with lithium cell and lead acid cell, isolated from AC electrical, which is safe and reliable n Wireless monitoring and communication, flexible control through APP, which make it easier to view data at any time n EzMeter can be used for detection of single-phase or three-phase inverter n Integrated protection: anti-islandig, max. output current, output short circuit, output over voltage n Ambient temperature range: C n Relative humidity: 0 95% n Maximum operating altitude: 4000 m n Cooling: natural convection n Noise emission: <25 db n Display: D and APP n BMS communication: RS485; CAN n Counter communication: RS485 n Portal communication: Wi-Fi n Mounting: wall bracket n Standby self-consumption: <15 W n Type: high frequency isolation n Certifications & Standards: AS4777.2; G83/G100; CEI 0-21 VDE4105-AR-N; VDE ; EN50438; IEC & 2, IEC ; EN ; EN ; EN ; EN MODEL GW3600S-BP GW5000S-BP Part No U W Battery nominal voltage (V) Max. charge voltage (V) 60 (configurable) 60 (configurable) Max. charge current (A) Max. discharge current (A) Battery capacity (Ah) Nominal AC power (W) Max. AC current to the grid (A) 16 22,8 Max. AC current from the grid (A) Power factor 1 (adaptive from 0,8 in advance to 0,8 in delay) THDi (@nominal output) <3% <3% Peak power (VA) 4416, 10 sec 5500, 10 sec Automatic switching time (ms) <10 <10 Nominal voltage (V) 230 (±2%) 230 (±2%) Nominal frequency (Hz) 50/60 (±0,2%) 50/60 (±0,2%) Max. current (A) 16 22,8 THDv (@linear load) <3% <3% Max. efficiency 95,5% 95,5% Dimensions mm ( ) WxHxD 347x432x190 (13,7x17x6.9) 347x432x190 (13,7x17x6.9) Weight kg (lbs) 18,5 (40.8) 18,5 (40.8)

33 STUDER - MPPT CHARGE CONTROLR VARIOSTRING VS-70 The VarioString VS-70 is a MPPT 70A solar charge controller. It is recommended for PV capacities up to 4.2kWp, and charges the battery with a maximum current of 70A. The solar modules are connected in series to form one single string (up to 600V) connected to the VS-70, all this without special tools and with reusable connectors VARIOSTRING VS-120 The VarioString VS-120 is a MPPT 120A/48V solar charge controller. Fully isolated dual MPPT inputs up to 600V (Voc) (2x3.5kWp) or up to 900V (Voc) (7kWp) with MPPT inputs in series. n Reduces Balance of System costs: eliminates expensive wiring for parallel strings, saving wires, connectors, junction boxes, fuses, space, time etc n Safe, simple and trouble free connection: with SUNCLI (Phoenix Contact tool free ) PV connector n Fully protected against wrong wiring n Simplified safety rules by full isolation between PV and battery and between MPPT inputs n MPPT efficiency >99%: fast precise best in class tracking algorithm. World champion for efficiency in isolated converter with >98% conversion efficiency n Low self-consumption: < 1,2W in night moode n 4 step charger fully programmable for longer battery life n Optimal usage in a com-lan or com-gsm n Certifications: EMC 2004/108/CE LV 2006/95/CE RoHs 2002/95/CE IEC/EN :2010 IEC/EN :11 - IEC/EN n Warranty: 5 years VS-70 UF 31 MPPT CHARGE CONTROLRS VS-120 MODEL VarioString VS-70 VarioString VS-120 Part No D T Electrical characteristics PV array side MPPT 1 MPPT parall. 1+2 serie Max. solar power recommended 4200 Wp 3500 Wp 3500 Wp 7000 Wp 7000 Wp Maximum current (Isc) 13 A 13 A 13 A 26 A 26 A Max. open circuit voltage (Voc) 200 V to 600 V 600 V 600 V 600 V 900 V Maximum output current 70 A 120 A Nominal battery voltage 48 V 48 V Operating temperature -20 C +55 C -20 C +55 C IP protection IP 54 IP 20 Dimensions mm ( ) 120 x 220 x x 322 x 466 (4.7 x 8.7 x 13.8) (5.2 x 12.7 x 18.3) Weight kg (lbs) 5,5 (12.1) 7,5 (16.5)

34 UF STUDER - MPPT CHARGE CONTROLR 32 MPPT CHARGE CONTROLRS VARIOTRACK When connected to solar panels and batteries, the solar charge controller Variotrack automatically charges the batteries in an optimal way with all the available solar power using its algorithm for Maximum Power Point Tracking (MPPT). n Maximize the energy generated from solar panels through maximum power point tracking n High conversion efficiency: 98% charge n Increased battery life 4-steps n Rugged and durable: designed to perform in harsh environmental conditions (IP54) n Can be installed up to 15 Variotrack in parallel n Low consumption: ON< 5W, standby < 1W (in night time mode) n Display with 6 Ds showing system status and current n Multifunctional display,programming and datalogging with RCC-02/-03 n Can be integrated into a tender system with synchronized battery control n Easy and safe to install: fully protected against incorrect wiring n Electronical protections: reverse polarity, short circuit, overload, high temperature, overvoltage, night reverse current n Temperature range: -20 C to +55 C n Largest wire: 35 mm² n Dimensions: 11,0 x 21,0 x 31,0 cm (4.3 x 8.3 x 12.2 ) n Weight: 4,7 kg (10.4 lbs) n Certifications: EMC 2004/108/CE - LV 2006/95/CE - RoHS 2002/95/CE n WARRANTY: 5 years VARIOTRACK VT-65 VT-80 Part No N A Maximum battery current 65 A 80 A Nominal 850 Wp (battery 12V) 1050 Wp (battery 12V) solar input 1700 Wp (battery 24V) 2100 Wp (battery 24V) 3400 Wp (battery 48V) 4200 Wp (battery 48V) Maximum open circuit voltage 150 V 150 V System voltage 12/24 or 48 VDC 12/24 or 48 VDC ACCESSORIES RCC Y RCC R BTS T Remote control Remote control Battery temperature sensor

35 STUDER - BATTERY CHARGER / INVERTERS SERIE TENDER Tender series provides an unmatched freedom of use due to its many functions. In a basic application, it offers a total package: the functions of inverter, battery charger, transfer system and assistance to the source. These functions can be combined and controlled in a totally automatic way for exceptional ease and optimal management of available energy. n Smart-Boost function: allows you to add the inverter power to another source, eg. a generator, another inverter or the grid to increase the available power n Multi-function contacts: can be programmed to provide many additional features. Can be programmed as time switch n Programmable auxiliary contacts for interconnection with existing systems and implementation of functions n Possibility to connect up to 9 Tender in parallel, both to increase the available power, and to create a three-phase source n Automatic reduction of peak loads with the distribution of the available power n Adjustable stand-by n Multistage programmable battery charger with PFC n DSP: control using digital signal processors n Overload electronic protection n Warranty: 5 years TENDER TS V TS V TS V Part No L N R Power P VA 1200 VA 1400 VA Continuous power 500 VA 650 VA 750 VA Battery charger 35 A 25 A 12 A Transfer relay 16 A / 0.9 kva 16 A / 1.2 kva 16 A / 1.4 kva TENDER TM V TM V TM V TM V TM V TM V UF 33 TENDER BATTERY CHARGER/INVERTERS Part No S U W E G J Power P VA 2000 VA 2400 VA 2600 VA 3500 VA 4000 VA Continuous power 1500 VA 2000 VA 2000 VA 2000 VA 3000 VA 3500 VA Battery charger 70 A 100 A 55 A 30 A 90 A 50 A Transfer relay 50 A / 1.5 kva 50 A / 2.0 kva 50 A / 2.4 kva 50 A / 2.6 kva 50 A / 3.5 kva 50 A / 4.0 kva TENDER TH V TH V TH V TH V Part No T B J D Power P VA 5000 VA 6000 VA 8000 VA Continuous power 2500 VA 4500 VA 5000 VA 7000 VA Battery charger 160 A 140 A 100 A 120 A Transfer relay 50 A / 3 kva 50 A / 5 kva 50 A / 6 kva 50 A / 6 kva

36 UF STUDER - ACCESSORIES FOR BATTERY CHARGER / INVERTERS 34 ACCESSORIES FOR STUDER PRODUCTS RCC-02/ Y/68478 R - Remote control n Enables the setting of the parameters as well as the display of the values measured n By an SD card, it is possible to log the system data and to save and restore the parameters of the system n Supplied with 2 m cbale n Available for wall mounting (model RCC-02) or flush mount (model RCC-03) BTS T - Battery temperature sensor n Allows the automatic compensation of the adjustable thresholds of the battery voltage n Supplied with 5 m cable RCM V - Remote ON/OFF CONTROL n Remotely control the input to TS system functions n Supplied with 5 m cable n For mounting on DIN rail BSP 500/ /68499 Z - Control to monitor battery charging status n It is connected to the BUS communication of the TS systems n Displays the recorded data and controls the 2 auxiliary contacts of the TS systems n Supplied with 5 m cable com-232i E - Communication module between TS systems and SCADA control n RS-232 input and 2 m of RJ45 cable com-lan Z - com-gsm K - com-sms H - Communication sets by internet/smartphones for tender series n Communication set com-lan - The set includes one com-232i, one Ethernet port and al necessary accessories. n Communication set com-gsm - The set includes one com-232i, one cellular modem and all necessary accessories. The sim card is not provided. GPRS/3G network. n Communication set com-sms - The com-sms is a cost effective add-on. It provides a secured access to your installation by sending or receiving SMS to your remote power system. The SIM card is not provided. 2G network. ARM L - Support module to mount TS systems on DIN RAIL n Supplied with 2 auxiliary contacts controlled by TS systems EFC N - External cooling module (IP54) n This accessory increases the TS system power n To be installed directly on TS casing and it can be mounted in any time even after installation CAB-RJ45-8-xx R - Communication cable between TS systems and accessories n Available length: 2, 5, 10, 20, 50 m n Other length are available on request

37 STUDER - PURE SINE WAVE INVERTERS UF AJ SERIES The AJ range consists of sine wave inverters that convert a battery s DC voltage into AC voltage, which can be used by all electrical appliances. n Digital control by microprocessor, ensures high performance. The toroidal transformer and MOS power stage allow maximum efficiency n Steady output voltage: 230 V +/- 5%, 50 Hz +/- 0,05% n Charge controller built-in for PV solar systems n Protection against: short circuit, reverse polarity, overload, overheat and overcurrent n Automatic disconnect with alarm in case of low battery n IP 30 (IP 20 for AJ 2000) n High reliability, silent, complete with connecting cables n CE certified n WARRANTY: 5 years 35 AJ SERIES INVERTERS AJ SERIES AJ 200 AJ 400 AJ 800 AJ 2000 Model Part No D H G M Y R C G T Nominal voltage (V) Voltage range (V) Continuous power (VA) Power for 30 min P30- (VA) Peak power for 5 s (VA) Efficiency 93% 94% 94% 93% 94% 94% 93% 94% 92% 94% Stanby current draw (W) No load current draw (W) Dimensioni mm ( ) Dimensions mm ( ) 142 x 163 x 84 (5.6 x 6.4 x 3.3) 142 x 240 x 84 (5.6 x 9.4 x 3.3) 142 x 428 x 84 (5.6 x 16.8 x 3.3) 273 x 399 x 117 (10.7 x 15.7 x 4.6) Weight kg (lbs) 2.4 (5.3) 2.6 (5.7) 4.5 (9.9) 8.5 (18.7) 19 (41.9) 18 (39.7) Standby system (from 1 to 20 W) Only with controller standard standard standard Charge controller (option S) 10 A 15 A 25 A 30 A On demand: JT8 remote control with 10 m. cable, alarm and AJ 800 and AJ 2000 display.

38 UF 36 INVERTER/BATTERY CHARGERS UF - ICPV INVERTER/BATTERY CHARGERS MPPT ICPV 3 kva, 5 kva (MPPT) and 5 kva (double MPPT) n Pure sine wave inverter with built-in MPPT solar charge controller n 60 A integrated battery charger n Selectable input voltage range for home appliances and personal computers n Selectable charging current based on applications n Configurable AC/Solar input priority via LCD setting n Compatible to mains voltage or generator power n Auto restart function, overload and short circuit protection, cold start function n Optional components: PARALL KIT H - Parallel operation with up to 6 units only for 48V/5000VA version CONTROL PANEL F - Remote Control Panel available SNMP - WEB BO S - Box to communicate with SNMP protocol INVERTER BATTERY CHARGERS AC CONTROL PANEL F SNMP - WEB BO S ICPV (MPPT) PARALL KIT H MODEL ICPV 48V/3kW plus ICPV 48V/5kVA ICPV 5kVA double MPPT Part No P Y Rated power 3000 VA / 3000 W 5000 VA / 4000 W 5000 VA / 4000 W Voltage 230 VAC Selectable voltage range VAC (Personal Computers) VAC (Home Appliances) Frequency 50 Hz / 60 Hz (auto sensing) AC voltage regulation (batt. mode) 230 VAC ± 5% Surge power 6000 VA VA VA Efficiency (Peak) 90% - 93% Transfer time 10 ms (PC) 20 ms (home appliances) - Max. 30 A (3kVA) - 40 A (5kVA) Waveform Pure sine wave Battery voltage 48 VDC 48 VDC 48 VDC Floating charge voltage 54 VDC 54 VDC 54 VDC CHARGE CONTROLR Overcharge protection 62 VDC 60 VDC 60 VDC Maximum PV array power 3000 W 3000 W 6000 W MPPT operating voltage 60 VDC 115 VDC 60 VDC 115 VDCA 60 VDC 115 VDCA Maximum PV array open circuit voltage 145 VDC 145 VDC 145 VDC Maximum PV charging current 60 A 60 A 120 A Maximum AC charging current 10 A or 15 A 60 A 60 A Maximum charging current 75 A 120 A 180 A Maximum efficiency 98% Standby power consumption 2 W Best PV configuration 3000 Wp (250 Wp x 12 pz.) 3000 Wp (250 Wp x 12 pz.) - Dimensions mm ( ) 140x295x479 (5.5x11.6x18.9) 140x295x540 (5.5x11.6x21.3) 194x295x455 (7.6x11.6x17.9) Weight kg (lbs) 11.5 (25.4) 13.5 (29.8) 16 (35.3) Humidity 5% to 95% Relative Humidity (non-condensing) Operating temperature -20 C to 55 C Storage temperature -15 C to 60 C

39 UF - ICPV - INVERTER/BATTERY CHARGERS PWM ICPV 3 and 5 kva (PWM) n Pure sine wave inverter n 60 A integrated battery charger n Selectable input voltage range for home appliances and personal computers n Selectable charging current based on applications n Configurable AC/Solar input priority via LCD setting n Compatible to mains voltage or generator power n Auto restart function, overload and short circuit protection, cold start function n Optional components: CONTROL PANEL F - Remote Control Panel available SNMP - WEB BO S - Box to communicate with SNMP protocol INVERTER CONTROL PANEL F MODEL Part No. rated power Voltage Selectable voltage range Frequency AC voltage regulation (battery mode) Surge power Efficiency (Peak) SNMP - WEB BO S ICP 24V/3kW E 3000 VA / 3000 W 230 VAC ICPV (PWM) VAC (Personal Computers) VAC (Home Aplliances) 6000 VA 50 Hz / 60 Hz (auto sensing) 230 VAC ± 5% 93% ICP 48V/5kVA F 5000 VA / 4000 W VA UF 37 INVERTER/BATTERY CHARGERS Transfer time Waveform 10 ms (PC) 20 ms (home appliances) - Max. 10 A (1kVA) - 30 A (2/3kVA) - 40 A (5kVA) pure sine wave BATTERY CHARGERS AC Battery voltage 24 VDC 48 VDC Floating charge voltage 27 VDC 54 VDC Overcharge protection 31 VDC 60 VDC CHARGE CONTROLR Maximum PV voltage per string 60 VDC 105 VDC Maximum PV charging current 50 A Maximum AC charging current 30 A 60 A Maximum charging current 50 A 110 A Standby power consumption 2 W Dimensions mm ( ) 100x272x355 (3.9x10.7x14) 120x295x468 (4.7x11.6x18.4) Weight kg (lbs) 6,9 (15.2) 9,8 (21.6) Humidity Operating temperature Storage temperature 5% to 95% Relative Humidity (non-condensing) 0 C - 55 C -15 C - 60 C

40 UF 38 INVERTER/BATTERY CHARGERS UF - ICPV-EASY ICPV-EASY n Pure sine wave inverter n Selectable high power charging current n Wide DC input range n Selectable input voltage range for home appliances and personal computers n Configurable AC/Solar input priority via LCD setting n Compatible to mains voltage or generator power n Auto restart while AC is recovering n Smart battery charger design for optimized battery performance n Cold start function ICPV-EASY PWM ICPV-EASY MPPT MODEL PLUS LS LS Part No N R T V Rated Power 1000VA / 1000W 3000VA / 3000W 3000VA / 3000W 3000VA / 3000W 5000VA / 5000W INPUT AC Voltage Selectable voltage range Frequency OUTPUT 230 VAC VAC (Personal Computers) VAC (Home appliances) 50 Hz / 60 Hz (auto sensing) AC voltage (battery mode) 230 VAC ± 5% Surge power 2000 VA 6000 VA 6000 VA 6000 VA VA Efficiency (Peak) 90%-93% Transfer time Waveform BATTERY 10 ms (PC) 20 ms (home appliances) - Max. 30 A (3kVA) - 40 A (5kVA) Pure sine wave Battery voltage 12 VDC 24 VDC 24 VDC 24 VDC 48 VDC Floating charge voltage 13,5 VDC 27 VDC 27 VDC 27 VDC 54 VDC Overcharge protection 16 VDC 32 VDC 32 VDC 32 VDC 63 VDC SOLAR & AC CHARGE Max. PV array open circuit voltage 55 VDC 80 VDC 145 VDC 500 VDC* 500 VDC* Maximum solar charge current 50 A 50 A 60 A 80 A 80 A Maximum AC charge current 20 A 25 A 60 A 60 A 60 A Maximum charge current 50 A 70 A 120 A 800 A 80 A Maximum PV array power 600 W 1200 W 1500 W 4000 W 4000 W PHYSICAL Dimensions mm ( ) 88x225x x285x x300x x300x x300x400 DxWxH (3.5x8.9x12.6) (3.9x11.2x13.1) (3.9x11.8x15.7) (3.9x11.8x17.3) (3.9x11.8x15.7) Weight kg (lbs) 5 (11) 6,5 (14.3) 9,5 (21) 9 (19.8) 10 (22) Communication interface USB OPERATING ENVIRONMENT Humidity 5% to 95% Relative Humidity (non-condensing) Operating temperature -10 C to 50 C Storage temperature -15 C to 60 C *Operating voltage range: VDC

41 UF - MPPT CHARGE CONTROLRS UF-SCC-MPPT 600W, 3KW n Built-in high performance DSP control n Buolt-in temperature sensor (BTS) for UF-SCC-MPPT-3KW n Automatic battery voltage detection n Loading three-stage batteries: bulk, absorption and floating n Multi-function LCD display n D indicators UF-MPPT-600W UF-MPPT-3KW MODEL UF-MPPT-600W UF-MPPT-3KW Part No E L INPUT FEATURES MPPT operating voltage range 30 VDC 66 VDC 60 VDC 115 VDC Max. PV open circuit voltage 75 VDC 145 VDC Max. input power from PV 600W (24V) 800W (12V) W (24V) W (48V) Max. current 18 A 50 A OUTPUT FEATURES Nominal battery voltage 24 VDC 12 VDC - 24 VDC - 48 VDC Battery types sealed AGM, GEL, lead batteries open cell batteries, NiCd batteries sealed AGM, GEL, lead batteries Max. charging current 25 A 60 A Max. efficiency 98 % Charge algorithm INDICATORI LCD panel D display PROTECTION Overload protection Overcharge protection Reverse polarity protection PV & batteries 3 stages: bulk, absorption, floating LCD panel indicates solar power, load capcity/battey voltage charging current and fault conditions Three status indicators fors solar, battery charger and loads >110%: sound alert yes yes UF 39 MPPT CHARGE CONTROLRS PHYSICAL FEATURES Dimensions W x D x H mm ( ) 220x170x57,5 (8.7x6.7x2.3) 315x165x128 (12.4x6.5x5) Net weight kg (lbs) 1,85 (4.1) 4,5 (9.9) IP protection IP43 IP31 OPERATING FEATURES Humidity 0 100% relative humidity (no condens.) 5 95% relative humidity (no condens.) Operating temperature -20 to +55 C 0 to +55 C Storage temperature -40 to +75 C -15 to +75 C Altitude mt

42 UF CHARGE CONTROLRS SMARTSOLAR MPPT 75/10-75/15-100/15-100/20-100/30-100/50-150/35 CHARGE CONTROLRS 40 CHARGE CONTROLRS n Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers n Load output: Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage n BatteryLife: intelligent battery management. The BatteryLife algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i. e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100% n Resin encapsulated electronics n Day/night timing and light dimming option n Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40 C (104 F). No cooling fan n Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT s tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP n Flexible charge algorithm: Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch n Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection n Warranty: 5 years MODEL 75/10 75/15 100/15 100/20 100/30 100/50 150/35 Part No B D U W K M W Battery voltage 12V/24V auto detected Maximum output current 10 A 15 A 20 A 30 A 50 A 35 A Maximum PV power 135W /12V) 270W (24V) 200W (12V) 400W (24V) 290W (12V) 580W (24V) 440W (12V) 880W (24V) 700W (12V) 1400W (24V) 500W (12V) 1000W (24V) Maximum PV open circuit voltage 75 V 100 V 150 V Maximum efficiency 98% Self-consumption Low voltage load disconnect 100mA 11,1V/22,2V o 11,8/23,6V o algorithm BatteryLife - Load voltage load reconnect Operating temperature Protection class 13,1V/26,2V o 14V/28V o algorithm BatteryLife C +60 C IP43 (electronic components) - IP22 (connections) Dimensions mm ( ) 100x113x40 (3.9x4.5x1.6) 100x113x50 (3.9x4.5x2) 100x113x60 (3.9x4.5x2.4) 130x186x70 (5.1x7.3x2.8) Weight kg (lbs) 0,5 (1.1) 0,6 (1.3) 0,65 (1.4) 1,3 (2.9) 1,25 (2.8)

43 CHARGE CONTROLRS SMARTSOLAR TR & MC4 CHARGE CONTROLRS: 150/45-150/60-150/70-150/85-150/100 UF n Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers n Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the powervoltage curve. Conventional MPPT s tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP n Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98%. n Flexible charge algorithm: Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch n Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection n Internal temperature sensor: Compensates absorption and float charge voltage for temperature. n Real-time data display options: Apple and Android smartphones, tablets and other devices. ColorControl panel n Bluetooth smart built-in, dongle not needed: The wireless solution to set-up and monitor the controller n VE.Direct: For a wired data connection n Remote on-off: To connect for example to a VE.BUS BMS n Programmable relay: Can be programmed (a.o. with a smart phone) to trip on an alarm, or other events n Pluggable LCD display (optional): Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display n Warranty: 5 years TR MC4 SmartSolar pluggable display (optional) 41 CHARGE CONTROLRS MODEL 150/45 150/60 150/70 150/85 150/100 Part No. TR T H Z C E Part No. MC V B G J Battery voltage 12V/24V/48V auto detect Maximum output current 45 A 60 A 70 A 85 A 100 A Maximum PV power 650W (12V) 1300W (24V) 2600W (48V) 860W (12V) 1720W (24V) 3440W (48V) 1000W (12V) 2000W (24V) 4000W (48V) 1200W (12V) 2400W (24V) 4900W (48V) 1450W (12V) 2900W (24V) 5800W (48V) Maximum PV open circuit voltage Maximum efficiency 250V absolute maximum coldest conditions 245V start-up and operating maximum 98% 150V absolute maximum coldest conditions 145V start-up and operating maximum 99% Self-consumption Operating temperature Protection class Dimensions TR mm ( ) Dimensions MC4 mm ( ) Weight kg (lbs) < 12V / 20 48V -30 C +60 C IP43 (electronic components) - IP22 (connections) 216 x 295 x 103 (8.5 x 11.6 x 4.1) 246 x 295 x 103 (9.7 x 11.6 x 4.1) 4,5 (9.9)

44 UF CHARGE CONTROLRS SMARTSOLAR TR & MC4 CHARGE CONTROLRS: 250/60-250/70-250/85-250/ CHARGE CONTROLRS n Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers n Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT s tend to lock to a local MPP, which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP n Outstanding conversion efficiency: No cooling fan. Maximum efficiency exceeds 98%. n Flexible charge algorithm: Fully programmable charge algorithm, and eight preprogrammed algorithms, selectable with a rotary switch n Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection n Internal temperature sensor: Compensates absorption and float charge voltage for temperature. n Real-time data display options: Apple and Android smartphones, tablets and other devices. ColorControl panel n Bluetooth smart built-in, dongle not needed: The wireless solution to set-up and monitor the controller n VE.Direct: For a wired data connection n Remote on-off: To connect for example to a VE.BUS BMS n Programmable relay: Can be programmed (a.o. with a smart phone) to trip on an alarm, or other events n Pluggable LCD display (optional): Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display n Warranty: 5 years TR MC4 SmartSolar pluggable display (optional) MODEL 250/60 250/70 250/85 250/100 Part No. TR D H K P Part No. MC F K M S Battery voltage 12V/24V/48V auto detect Maximum output current 60 A 70 A 85 A 100 A Maximum PV power 860W (12V) 1720W (24V) 3440W (48V) 1000W (12V) 2000W (24V) 4000W (48V) 1200W (12V) 2400W (24V) 4900W (48V) 1450W (12V) 2900W (24V) 5800W (48V) Maximum PV open circuit voltage Maximum efficiency 150V absolute maximum coldest conditions 145V start-up and operating maximum 98% 250V absolute maximum coldest conditions 245V start-up and operating maximum 99% Self-consumption Operating temperature Protection class Dimensions TR mm ( ) Dimensions MC4 mm ( ) Weight kg (lbs) < 12V / 20 48V -30 C +60 C IP43 (electronic components) - IP22 (connections) 216 x 295 x 103 (8.5 x 11.6 x 4.1) 246 x 295 x 103 (9.7 x 11.6 x 4.1) 4,5 (9.9)

45 VICTRON ENERGY MPPT CHARGE CONTROLRS BLUESOLAR MPPT 150/70 & 150/85 CHARGE CONTROLRS n PV voltage up to 150V: The BlueSolar MPPT 150/70 and 150/85 charge controllers will charge a lower nominal-voltage battery from a higher nominal voltage PV array. The controller will automatically adjust to a 12, 24, 36, or 48 V nominal battery voltage n Ultra-fast Maximum Power Point Tracking (MPPT): Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers n Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPT s tend to lock to a local MPP, which may not be the optimum MPPT. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP n Exceptional conversion efficiency: max efficiency higher than 98%. Full output current even with temperatures exceeding 40 C (104 F) n Outstanding conversion efficiency: Maximum efficiency exceeds 98%. Full output current up to 40 C (104 F) n Programmable auxiliary relay: For alarm or generator start purposes n Extensive electronic protection: Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. Reverse current protection n Certifications: EN ; EN ; EN n Warranty: 5 years UF 43 CHARGE CONTROLRS MODEL 150/70 150/85 Part No Z Nominal battery voltage 12V/24V/36V/48V Rated charge current 70 A (at 40 C) 85 A (at 40 C) Maximum PV input power 12V:1000W - 24V:2000W 36V:3000W - 48V:4000W 12V:1200W - 24V:2400W 36V:3600W - 48V:4850W Maximum PV open circuit voltage 150V absolute maximum coldest conditions 145V start-up and operating maximum Minimum PV voltage Battery voltage plus 7 Volt to start Battery voltage plus 2 Volt operating Self-consumption 12V:0,55W / 24V:0,75W / 36V:0,9W / 48V:1,0W Efficiency at full load 12V:95% / 24V:96,5% / 36V:97% / 48V:97,5% Parallel operation Yes, through VE.Can. Max 25 units in parallel Remote on/off NO YES Operating temperature -40 C +60 C Humidity (non condensing) Max. 95% Protection class IP 20 Cooling Natural convection Low noise fan assisted Dimensions mm ( ) 350 x 160 x 135 (13.8 x 6.3 x 5.3) Weight kg (lbs) 5 (11.0)

46 UF VICTRON ENERGY - PWM-PRO CHARGE CONTROLRS n Programmable: The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable with help of the dedicated BlueSolar Pro Remote Panel. 44 CHARGE CONTROLRS BLUE SOLAR PWM AND PWM-PRO CHARGE CONTROLRS n Low cost PWM controller n Lighting control function, fully programmable with the Remote Panel (optional) n Three stage battery charging (bulk, absorption, float), fully programmable with the Remote Panel (optional) n Integrated battery monitor function (Remote Panel needed to display state of charge) n Load output with low voltage disconnect and manual control (default setting) n Optional external temperature sensor V n BlueSolar PWM Pro to USB interface cable SA n Load output protected against over load and short circuit n Protected against reverse polarity connection of the solar panels and/or battery n Protection category: IP30 n Certifications: IEC , EN , EN , ISO n Warranty: 5 years BlueSolar PWM-Pro10A BlueSolar Pro Remote Panel (optional) PWM-PRO PWM-PRO PWM-PRO MODEL 12/ / /24-30 Part No G N B Voltage 12 V 24 V 12 V 24 V 12 V 24 V Rated load current 10 A 10 A 20 A 20 A 30 A 30 A Maximum solar voltage 28 V 55 V 28 V 55 V 28 V 55 V Self consumption <10mA <10mA <10mA Low voltage load disconnect 11,1V / 22,2V 11,1V / 22,2V 11,1V / 22,2V Low voltage load reconnect 12,6V / 25,2V 12,6V / 25,2V 12,6V / 25,2V Operating temperature -20 to + 50 C -20 to + 50 C -20 to + 50 C Dimensions mm ( ) 70 x 138 x 37 (2.8 x 5.4 x 1.5) 82 x 160 x 48 (3.2 x 6.2 x 1.8) 100 x 200 x 57 (3.9 x 7.9 x 2.2) Weight kg (lbs) 0,13 (0.3) 0,3 (0.7) 0,5 (1.1)

47 VICTRON ENERGY - BATTERY CHARGERS BLUE POWER SMART CHARGER IP22 With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard. Bluetooth built-in function for smartphone monitoring Standard features Adaptive 6-stage charge algorithm: test-bulk absorption-recondition float storage. Storage Mode: less maintenance and aging when the battery is not in use. Also charges Li-ion batteries. NIGHT and LOW setting: the output current is reduced to max. 25% of the nominal output and the charger will be totally noiseless. Protected against overheating. Eleven Ds for Status indication. Warranty: 5 years BLUE SMART IP 22 INPUT VOLTAGE CHARGE VOLTAGE CHARGE DIMENSIONS WEIGHT MODEL PART No. RANGE ABSORPTION CURRENT H x W x D mm ( ) kg (lbs) 12/15 IP22 (1) S V AC / Hz Variable* 15A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 12/15 IP22 (3) U V AC / Hz Variable* 15A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 12/20 IP22 (1) W V AC / Hz Variable* 20A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 12/20 IP22 (3) Y V AC / Hz Variable* 20A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 12/30 IP22 (1) A V AC / Hz Variable* 30A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 12/30 IP22 (3) N V AC / Hz Variable* 30A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 24/8 IP22 (1) F V AC / Hz Variable* 8A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 24/12 IP22 (1) B V AC / Hz Variable* 12A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 24/16 IP22 (1) F V AC / Hz Variable* 16A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 24/16 IP22 (3) S V AC / Hz Variable* 16A 235x108x65 (9.2x4.2x2.6) 1,4 (3.1) 45 UF BATTERY CHARGERS * Absorption: 12V Normal 14,4V, High 14,6V, Li-ion 14,2V 24V Normal 28,8V, High 29,2V, Li-ion 28,4V Float: 12V Normal 13,8V, High 13,8V, Li-ion 13,35V 24V Normal 27,6V, High 27,6V, Li-ion 26,7V Storage: 12V Normal 13,2V, High 13,8V, Li-ion n.d. 24V Normal 26,4V, High 26,4V, Li-ion: n.d BLUE SMART PORTAB BATTERY CHARGER IP65 WITH DC CONNECTOR n Water, dust and chemical resistant n Seven step smart charge algorithm n Recovery of fully discharged dead batteries n Automatic power supply function n Automatic compensation for high or low temperature n Several other battery life enchancing features n Li-ion battery mode n Bluetooth built-in function for smartphone monitoring n Warranty: 5 years BLUE SMART IP 65 INPUT VOLTAGE CHARGE VOLTAGE CHARGE DIMENSIONS WEIGHT MODEL PART No. RANGE ABSORPTION CURRENT H x W x D mm ( ) kg (lbs) 12/4 IP V V AC / Hz 14,4V DC 4A 47x95x190 (1.8x3.7x7.5) 0.9 (2.0) 12/5 IP V AC / Hz 14,4V DC 5A 47x95x190 (1.8x3.7x7.5) 0.9 (2.0) 12/7 IP Z V AC / Hz 14,4V DC 7A 47x95x190 (1.8x3.7x7.5) 0.9 (2.0) 12/10 IP B V AC / Hz 14,4V DC 10A 60x105x190 (2.4x4.1x7.5) 0.9 (2.0) 12/15 IP D V AC / Hz 14,4V DC 15A 60x105x190 (2.4x4.1x7.5) 0.9 (2.0) 24/5 IP F V AC / Hz 28,8V DC 5A 47x95x190 (1.8x3.7x7.5) 0.9 (2.0) 24/8 IP P V AC / Hz 28,8V DC 8A 60x105x190 (2.4x4.1x7.5) 0.9 (2.0) ACCESSORIES M6 eyelet connector with fuse C 12V cigarette lighter plug with fuse G 2 m extension cable E Connect clamps with fuse J

48 UF 46 BLUE SMART IP 67 BATTERY CHARGERS VICTRON ENERGY - BATTERY CHARGERS BLUE SMART BATTERY CHARGERS - WATERPROOF - IP 67 n Power supply range : VAC n Completely encapsulated body. Water, oil or dirt will not damage the Blue Power IP67 charger. The casing is made of cast aluminium and the electronics are moulded in resin. n Top level efficiency: with 92% efficiency or better, these chargers waste three to four times less heat n Adaptive 4-stage charge algorithm: bulk absorption float storage. The Blue Smart charger features a microprocessor controlled adaptive battery management. This feature will automatically optimise the charging process relative to the way the battery is being used. n Bluetooth built-in function for smartphone monitoring n Warranty: 5 years INPUT VOLTAGE CHARGE CHARGE DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE CURRENT H x W x D mm ( ) kg (lbs) 12/7 IP M V AC / Hz 14,4V DC 7A 85x211x60 (3.4x8.3x2.4) 1.8 (4) 12/13 IP V AC / Hz 14,4V DC 13A 85x211x60 (3.4x8.3x2.4) 1.8 (4) 12/17 IP E V AC / Hz 14,4V DC 17A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) 12/25 IP G V AC / Hz 14,4V DC 25A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) 12/25 IP67 (1+SI) J V AC / Hz 14,4V DC 25A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) 24/5 IP T V AC / Hz 28,8V DC 5A 85x211x60 (3.4x8.3x2.4) 1.8 (4) 24/8 IP V V AC / Hz 28,8V DC 8A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) 24/12 IP V AC / Hz 28,8V DC 12A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) 24/12 IP67 (1+SI) Z V AC / Hz 28,8V DC 12A 99x219x65 (3.9x8.6x2.6) 2.4 (5.3) The models with suffix (1+Si) feature a second current limited output which is always powered as long as VAC is present on the input. This output can for example be used to prevent starting of a vehicle before unplugging the battery charger (start interrupt function). PHOENI BATTERY CHARGERS - MICROPROCESSOR CONTROL Phoenix automatic battery chargers with microprocessor can suit perfectly and automatically the charge for the batteries. During the 4 charge stages (bulk-absorption-float-storage) the battery charger will maintain the optimal charge depending on battery status and use. Standard features Aluminium epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, built-in temperature sensors, forced cooling, protection against output short circuit and over temperature, battery temperature sensor, compensation on cable voltage fall, two full charge output and one oputput limited to 4 A, RS-485 data port for computer connection, feeder function. Warranty: 5 years PHOENI CHARGE CHARGE Ah DIMENSIONS WEIGHT MODEL PART No. INPUT VOLTAGE VOLTAGE CURRENT (1) BATTERIES H x W x D mm ( ) kg (lbs) RANGE (Absorption) 12/ A V AC / Hz 14,4V DC 30 A (x2) + 4 A 100/ x200x108 (13.8x7.9x4.3) 3.8 (8.4) 12/ C V AC / Hz 14,4V DC 50 A (x2) + 4 A 200/ x200x108 (13.8x7.9x4.3) 3.8 (8.4) 24/ E V AC / Hz 28,8V DC 16 A (x2) + 4 A 100/ x200x108 (13.8x7.9x4.3) 3.8 (8.4) 24/ G V AC / Hz 28,8V DC 25 A (x2) + 4 A 100/ x200x108 (13.8x7.9x4.3) 3.8 (8.4) (1) 100 % output up to 40 C, 80% nominal output at 50 C and 60% of nominal at 60 C

49 VICTRON ENERGY - BATTERY CHARGERS CENTAUR BATTERY CHARGERS: analogic control Centaur battery chargers have automatic three stage IUoUo charging. All models are designed to operate all over the world without any adjustment needed on input voltage range or frequency. They have three isolated outputs to simultaneously charge 3 battery banks. Each output is capable to supply the full rated current. Standard features Aluminium epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, built-in temperature sensors, forced cooling, protection against output short circuit and over temperature, analog ammeter, DIP switch for selection of charge/float voltage for flooded lead-acid, gel or AGM batteries, Europe CE certification and U.S.A. UL certification. Temperature range: C Warranty: 5 years CENTAUR INPUT VOLTAGE CHARGE VOLT CHARGE Ah DIMENSIONS WEIGHT MOD. Part No. RANGE ABSORPTION CURRENT (1) BATTERIES H x W x D mm ( ) kg (lbs) 12/ K V AC / Hz 14.3 VDC 20 A 80 /200 12/ M V AC / Hz 14.3 VDC 30 A 120/ x 215 x (14.0 x 8.5 x 4.3) (8.4) 355 x 215 x (14.0 x 8.5 x 4.3) (8.4) 47 UF BATTERY CHARGERS 12/ P V AC / Hz 14.3 VDC 40 A 160/400 12/ S V AC / Hz 14.3 VDC 50 A 200/ x 239 x (16.8 x 9.4 x 5.3) (11) 426 x 239 x (16.8 x 9.4 x 5.3) (11) 12/ A V AC / Hz 14.3 VDC 60 A 240/ x 239 x (16.8 x 9.4 x 5.3) (11) 12/ C V AC / Hz 14.3 VDC 80 A 320/800 12/ E V AC / Hz 14.3 VDC 100 A 400/ x 255 x (19.9 x 10.0 x 5.2) (26.4) 505 x 255 x (19.9 x 10.0 x 5.2) (26.4) 24/ J V AC / Hz 28.5 VDC 16 A 45/150 24/ L V AC / Hz 28.5 VDC 30 A 120/300 24/ N V AC / Hz 28.5 VDC 40 A 160/400 24/ R V AC / Hz 28.5 VDC 60 A 240/ x 215 x (14.0 x 8.5 x 4.3) (8.4) 426 x 239 x (16.8 x 9.4 x 5.3) (11) 505 x 255 x (19.9 x 10.0 x 5.2) (26.4) 505 x 255 x (19.9 x 10.0 x 5.2) (26.4) (1) 100 % output up to 40 C, 80% nominal output at 50 C and 60% of nominal at 60 C

50 UF VICTRON ENERGY - BATTERY CHARGERS SKYLLA BATTERY CHARGERS - microprocessor control Skylla battery chargers have automatic three stage IUoUo charging. They are designed for use on battery banks with 24V DC / 48V DC. They have two outputs, two full charge output and one oputput limited to 4 A. Standard features Aluminium epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, built-in temperature sensors, forced 48 cooling, protection against output short circuit and over temperature, SKYLLA battery temperature sensor, compensation on cable voltage fall, feeder function. Warranty: 5 years BATTERY CHARGERS SKYLLA GMDSS BATTERY CHARGERS Power supply: The Skylla TG has proven itself to be an excellent battery charger and power supply for GMDSS applications. However, when using a standard Skylla charger, additional equipment is needed to perform the monitoring and alarm functions required for GMDSS. No adjustments needed: The whole system is click and go : the panels are pre-programmed for GMDSS functionality. A simple, intuitive menu allows changing of settings if required. Battery time to go: The Skylla GMDSS charger has a built-in battery controller. The capacity of the battery is fully monitored so the panel can even indicate the time to go in case of a power supply black out. Warranty: 5 years SKYLLA GMDSS INPUT VOLTAGE CHARGE CHARGE Ah DIMENSIONS WEIGHT MOD. Part No. RANGE VOLTAGE (Absorption) CURRENT (1) BATTERIES H x W x D mm ( ) kg (lbs) TG 24/ J V AC / Hz 28.5 VDC 30 A + 4 A 150/ x 250 x (14.4 x 9.9 x 5.8) (12.1) TG 24/ x 250 x V V AC / Hz 28.5 VDC 30 A + 4 A 150/300 GMDSS (14.4 x 9.9 x 5.8) (13.2) TG 24/ L V AC / Hz 28.5 VDC 50 A + 4 A 250/ x 250 x (14.4 x 9.9 x 5.8) (12.1) TG 24/ x 250 x M V AC / Hz 28.5 VDC 50 A + 4 A 250/500 GMDSS (14.4 x 9.9 x 5.8) (13.2) TG 24/ x 250 x H V AC / Hz 28.5 VDC 50 A + 4 A 250/500 3 phases (14.4 x 10.2 x 10.1) (28.7) TG 24/ N V AC / Hz 28.5 VDC 80 A + 4 A 400/ x 250 x (14.4 x 9.9 x 10.1) (22) TG 24/ R V AC / Hz 28.5 VDC 100 A + 4 A 500/ x 250 x (14.4 x 9.9 x 10.1) (22) TG 24/ x 260 x phases T V AC / Hz 28.5 VDC 100 A + 4 A 500/1000 (20.0 x 10.2 x 10.4) (48) TG 48/ V V AC / Hz 57 VDC 25 A + 4 A 125/ x 250 x (14.4 x 9.9 x 5.8) (12.1) TG 48/ D V AC / Hz 57 VDC 50 A + 4 A 250/ x 250 x (14.4 x 9.9 x 10.1) (22) (1) 100 % output up to 40 C, 80% nominal output at 50 C and 60% of nominal at 60 C. OPTIONAL: Skylla control panel G

51 BATTERY CHARGERS SKYLLA-I BATTERY CHARGERS - MICROPROCESSOR CONTROL Synchronised parallel operation Several chargers can be synchronised with the CAN bus interface. This is achieved by simply interconnecting the chargers with RJ45 UTP cables. Please see the manual for details. The right amount of charge for a lead-acid battery: variable absorption time When only shallow discharges occur the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged. Preventing damage due to excessive gassing: the BatterySafe mode If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the Skylla-i will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached Less maintenance and aging when the battery is not in use: the Storage mode The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (26,4 V for 24 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to refresh the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. To increase battery life: temperature compensation Every Skylla-i comes with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature. This feature is especially recommended for sealed lead-acid batteries and/or when important fluctuations of battery temperature are expected. Battery voltage sense In order to compensate for voltage loss due to cable resistance, the Skylla-i is provided with a voltage sense facility so that the battery always receives the correct charge voltage. n Power supply range : VAC and VDC n This particular version has all the features of excellence present in the Skylla family and it adds other interesting features such as The Predisposition to charge Li-Ion (LiFePO4) and the Synchronised parallel operation via CANbus interface n The Skylla-I chargers, as the other Skylla units, are suitable for AC and DC (AC-DC and DC-DC operation), and as a power source due to the perfect stabilization of the output voltage n Warranty: 5 years SKYLLA-i 49 UF BATTERY CHARGERS INPUT VOLTAGE CHARGE Ah DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE BATTERIES H x W x D mm ( ) kg (lbs) i 24/80 (1+1) K V AC / Hz 28.8V Ah i 24/80 (3) M V AC / Hz 28.8V Ah i 24/100 (1+1) P V AC / Hz 28.8V Ah i 24/100 (3) S V AC / Hz 28.8V Ah 405x250x (16.0x9.9x5.9) (16.0) 405x250x (16.0x9.9x5.9) (16.0) 405x250x (16.0x9.9x5.9) (16.0) 405x250x (16.0x9.9x5.9) (16.0) - (1+1) two outputs. - (3) three full current outputs.

52 UF 50 INVERTERS VICTRON ENERGY - INVERTERS PHOENI INVERTER Developed for professional duty, Phoenix pure sine inverters are suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. A unique feature of the SinusMax technology is very high start-up power. Phoenix inverters, in fact, are well suited to power up difficult loads such as: refrigeration compressors, electric motors and similar applications. Conventional high frequency technology does not offer such extreme performance. PHOENI INVERTER up to 1200 VA Standard features Aluminium epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, forced cooling with temperature sensors, remote connector, battery cables (1.5 m), output short circuit protection, over temperature protection. Warranty: 5 years INPUT VOLTAGE CONT. OUTPUT PEAK MA. EFFIC. DIMENSIONS WEIGHT MODEL PART No. RANGE DC POWER - VA (1) POWER-W % H x W x D mm ( ) kg (lbs) 12/250 VE. Direct P 9,2 17, x165x260 (3.4x6.5x10.2) 2,4 (5.3) 12/375 VE. Direct S 9,2 17, x165x260 (3.4x6.5x10.2) 3,0 (6.6) 12/500 VE. Direct T 9,2 17, x172x275 (3.4x6.8x10.8) 3,9 (8.6) 12/800 VE. Direct Y 9,2 17, x216x305 (4.2x8.5x11.9) 5,5 (12.1) 12/1200 Schuko D 9,2 17, x194x305 (4.1x7.6x11.9) 8,5 (18.7) 24/250 VE. Direct U 18,4 34, x165x260 (3.4x6.5x10.2) 2,4 (5.3) 24/375 VE. Direct W 18,4 34, x165x260 (3.4x6.5x10.2) 3,0 (6.6) 24/500 VE. Direct B 18,4 34, x172x275 (3.4x6.8x10.8) 3,9 (8.6) 24/800 VE. Direct G 18,4 34, x216x305 (4.2x8.5x11.9) 5,5 (12.1) 24/1200 VE. Direct H 18,4 34, x232x327 (4.6x9.1x12.9) 7,4 (16.3) 48/250 VE. Direct Y 36,8 62, x165x260 (3.4x6.5x10.2) 2,4 (5.3) 48/375 VE. Direct A 36,8 62, x165x260 (3.5x6.5x10.2) 3,0 (6.6) 48/500 VE. Direct D 36,8 62, x172x275 (3.4x6.8x10.8) 3,9 (8.6) 48/800 VE. Direct J 36,8 62, x216x305 (4.2x8.5x11.9) 5,5 (12.1) 48/1200 VE. Direct R 36,8 62, x232x327 (4.6x9.1x12.9) 7,4 (16.3) (1) Continuous output power at 25 C OUTPUT: 230V AC ± 2% - 50 Hz ± 2%

53 VICTRON ENERGY - INVERTERS PHOENI INVERTERS 1200 VA VA Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix nverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. To transfer the load to another AC source: the automatic transfer switch. If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Computer interface: All models have a RS-485 port. All you need to connect to your PC is our MK2 interface (see under accessories). This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. Warranty: 5 years PHOENI 1200 VA 51 UF INVERTERS Standard features Aluminum epoxy powder coated case with drip shield, circuit board protection with an acrylic coating, forced cooling with temperature sensors, protection against: output short circuit, overload, low battery voltage, reverse polarity, reverse voltage on output, input voltage ripple, high temperature. Relay multifunction. INPUT VOLTAGE CONT OUTPUT PEAK MA. DIMENSIONS WEIGHT MODEL PART No. RANGE V DC POWER VA (1) POWER W EFFIC % H x W x D mm ( ) kg (lbs) C12/ W 9,5 17, x214x110 (14.7x8.4x4.3) 10 (22) C12/ Y 9,5 17, x214x110 (14.7x8.4x4.3) 10 (22) C12/ E 9,5 17, x255x125 (20.5x10.0x4.9) 13 (28.6) 12/ ,5 17, x258x218 (14.2x10.1x8.6) 18 (39.7) C24/ J 19,0 33, x214x110 (14.7x8.4x4.3) 10 (22) C24/ L 19,0 33, x214x110 (14.7x8.4x4.3) 10 (22) C24/ G 19,0 33, x255x125 (20.5x10.0x4.9) 13 (28.6) 24/ N 19,0 33, x258x218 (14.2x10.1x8.6) 18 (39.7) 24/ C 19,0 33, x328x240 (17.5x12.9x9.4) 30 (66.1) 48/ V 38,0 66, x258x218 (14.2x10.1x8.6) 18 (39.7) 48/ T 38,0 66, x328x240 (17.5x12.9x9.4) 30 (66.1) OUTPUT: 230V AC ± 2% - 50 Hz ± 2% (1) Continuous output power at 25 C All models are suitable for parallel (max 6 parallel units) and 3-phase operation OPTIONAL: control panel Phoenix CC Inverter E

54 UF VICTRON ENERGY - MULTI-FUNCTION INVERTER/BATTERY CHARGERS MULTIPLUS The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. The MultiPlus is compatible with Lithium-ion batteries. 52 INVERTER/BATTERY CHARGERS MULTI MULTIPLUS COMPACT MULTIPLUS Double AC outputs The main output features a no-break function: when the shore power or the genset power fails, the MultiPlus takes charge of the active loads without discontinuity. The second output is active only when an AC source is connected. The loads that may discharge the batteries, like the boiler, shall be connected to the second output. Parallel operation and three-phase configuration The MultiPlus are able to be installed in parallel up to 6 units. In addition to parallel connection, three units of the same model can be configured for three-phase output: up to 6 sets of three units can be parallel connected for a total output of 75KW /90kVA and a current of 2000A. Power Control The MultiPlus is a very powerful battery charger, drawing high currents from the genset or from the shore power (up to 10A per 5kVA Multi at 230 VAC). In order to avoid any generator or shore overload, a current limit can be set through the Multi Control Panel; this way the Multiplus will charge the battery with the current not used from the others AC loads on board. Power Assist In the event that the onboard load exceeds the available shore power, the inverter function works in parallel with the shore connection to boost the total energy available and avoid overload. This works just the same with a generator. Warranty: 5 years Four stage adaptive charger and dual battery charging System configuration After installation, the MultiPlus is ready to work. If settings have to be changed, this can be done with the DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches. The VE.Net panel can be used as well for any setting modification.

55 UF 53 INPUT CONT. BATTERY CHARGE DIMENSIONS WEIGHT MODEL PART No. VOLTAGE OUTPUT OUTPUT INPUT VOLTAGE CHARGE H x W x D mm ( ) kg (lbs) RANGE POWER (1) RANGE CURRENT 12/500/ H 9,5 17 V A + 1 A 311x182x100 (12.2x7.2x3.9) 4,4 (9.7) 12/800/ H 9,5 17 V A + 1 A 360x240x100 (14.2x9.5x3.9) 6,4 (14.1) C12/800/ K 9,5 17 V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) 12/1200/ E 9,5 17 V A + 1A 406x250x100 (16x9.8x3.9) 8,2 (18.1) C12/1200/ M 9,5 17 V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) C12/1600/ W 9,5 17 V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) C12/2000/ Y 9,5 17 V A + 4 A 520x255x125 (20.5x10x4.9) 13 (28.7) 12/3000/ A 9,5 17 V A + 4 A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 12/3000/ C 9,5 17 V A + 4 A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 24/500/ R V A + 1 A 311x182x100 (12.2x7.2x3.9) 4,4 (9.7) 230V AC ± 2% 50 Hz ± 2% 24/800/ K V A + 1 A 360x240x100 (14.2x9.5x3.9) 6,4 (14.1) C24/800/ E V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) 24/1200/ G V A + 1 A 406x250x100 (16x9.8x3.9) 8,2 (18.1) C24/1200/ J V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) C24/1600/ G V A + 4 A 375x214x110 (14.7x8.4x4.3) 10 (22) C24/2000/ N V A + 4 A 520x255x125 (20.5x10x4.9) 13 (28.7) 24/3000/ J V A + 4 A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 24/3000/ H V A + 4 A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 24/5000/ L V A + 4 A 444x328x240 (17.5x12.8x9.4) 30 (66.1) 48/500/ T 9,5 17 V A 311x182x100 (12.2x7.2x3.9) 4,4 (9.7) 48/800/ F V A 360x240x100 (14.2x9.5x3.9) 6,4 (14.1) 48/1200/ U V A 406x250x100 (16x9.8x3.9) 8,2 (18.1) 48/3000/ N V A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 48/3000/ Z V A 362x258x218 (14.2x10.1x8.6) 18 (39.7) 48/5000/ B V A 444x328x240 (17.5x12.8x9.4) 30 (66.1) V AC / Hz INVERTER/BATTERY CHARGERS (1) Continuous output power at 25 C. Color Control G W is available to monitor and manage system functions.

56 UF 54 INVERTER/BATTERY CHARGERS VICTRON ENERGY - MULTI-FUNCTION INVERTER/BATTERY CHARGERS QUATTRO 5kVA Two AC inputs with integrated transfer switch The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators: the Quattro will automatically connect to the active source. Two AC outputs The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less then 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC source is available. Loads that should discharge the battery, like a water heater for example can be connected to this output. Virtually unlimited power thanks to parallel operation Up to 10 Quattro s can operate in parallel. Ten units 24/5000/120, for example, will provide 40kW / 50kVA output power and 1200 Amp charging capacity. Three phase capability Three units can be configured for three-phase output and up to 6 sets of three units can be parallel connected to provide 75kW / 90kVA inverter power and more then 2000 Amp charging capacity. Power Control - Dealing with limited generator, shore-side or grid power The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore-side supply (16A per Quattro at 230 VAC). A current limit can be set for both AC inputs. The Quattro will then take account of the other AC loads and use whatever is spare for charging, thus preventing the generator or shore supply from being overloaded. Power Assist Boosting shore or generator power Where peak power is so often required only for a limited period, the Quattro makes sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. With this feature, problems related to insufficient shore or generator power are solved once and for all. Air conditioning, an electric hob, a washing machine, a dish washer, a 16A shore connection, or even less then16a, will not limit you in any way. Warranty: 5 years QUATTRO QUATTRO INPUT CONT. BATTERY CHARGE DIMENSIONS WEIGHT MODEL PART No. VOLTAGE OUTPUT INPUT VOLTAGE CHARGE H x W x D mm ( ) kg (lbs) RANGE POWER (1) RANGE CURRENT 12/3000/ D 9, V DC (absorption) 362x258x218 19,0 120A + 4A 13.8V DC (float) (14.3x10.1x8.6) (41.8) 12/5000/ V /3000/ F /5000/ S /8000/ T /5000/ W /8000/ K /10000/ B /15000/ F (1) Continuous output power at 25 C OUTPUT: 230V AC ± 2% 14.4V DC (absorption) 470x350x280 34,0 220A + 4A 13.8V DC (float) (18.5x13.8x11) (74.9) 28.8V DC (absorption) 362x258x218 19,0 70A + 4A 27.6V DC (float) (14.3x10.1x8.6) (41.8) 28.8V DC (absorption) 444x328x A + 4A 27.6V DC (float) (17.4x12.9x9.4) (66.1) 57,6V DC (absorption) 470x350x280 41,0 110A + 4A 55,2V DC (float) (18.5x13.8x11) (90.4) 57.6 VDC (absorption) 444 x 328 x ,0 70 A 55.2 VDC (float) (17.4 x 12.9 x 9.4) (66.1) 57.6 VDC (absorption) 470 x 350 x ,0 110 A 55.2 VDC (float) (18.5 x 13.8 x 11) (90.4) 57.6 VDC (absorption) 470 x 350 x ,0 140 A 55.2 VDC (float) (18.5 x 13.8 x 11) (99.2) 57.6 VDC (absorption) 570 x 480 x ,0 210 A 55.2 VDC (float) (22.4 x 18.9 x 13) (158.7)

57 VICTRON ENERGY - MULTI-FUNCTION INVERTER/BATTERY CHARGERS EASYPLUS n 12 Volt 1600VA sine wave inverter (3000 Watt peak power) n 70A charger including 4A trickle charge for start battery n Unique PowerAssist technology protects the shore or generator from being overloaded by adding extra inverter power when needed n 4 stage adaptive charge technology for quick and accurate battery charging n Two Ac output sockets protected by 16A automatic circuit breakers for optimum safety. Second AC output active only when shore power is available n Battery cables and remote panel included n Warranty: 5 years MODEL EP C 12/1600/70-16 Part No. EASY SOLAR The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. n The product is easy to install, with a minimum of wiring n Three models are available: 12, 24 and 48V with 1600, 3000 or 5000 VA inverter. The batteries can be charged with solar power (BlueSolar MPPT) and/or with AC power (inverter/ charger) from the utility grid or a genset n Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. n Unique PowerAssist technology protects the utility or generator supply from being overloaded n Warranty: 5 years F Dimensions mm ( ) 510 x 214 x 110 (20 x 8.4 x 4.3) Weight kg (lbs) 11 (24.3) EASYPLUS EASYSOLAR 55 UF MULTI-FUNCTION INVERTER/BATTERY CHARGERS EASYSOLAR PART No. CHARGE CONTROLR DIMENSIONS mm ( ) HxWxD WEIGHT kg (lbs) 12/1600/ P 1x MPPT 100/50 745x214x110 (29.3x8.4x4.3) 12 (26.5) 24/1600/ S 1x MPPT 100/50 745x214x110 (29.3x8.4x4.3) 12 (26.5) 24/3000/70-50* T 1x MPPT 150/70-MC4 810x258x218 (31.9x10.2x8.6) 28 (61.7) 48/3000/35-50* J 1x MPPT 150/70-MC4 810x258x218 (31.9x10.2x8.6) 28 (61.7) 48/5000/70-100* L 1x MPPT 150/100-MC4 877x328x241 (34.5x12.9x9.5) 48 (105.8) * Color Control G included

58 UF VICTRON ENERGY - DC-DC CONVERTERS Orion DC/DC Converters are designed to deliver a stable 12 Volt supply from a 24 Volt system. An inferior supply can cause irreparable damage to 12 Volt system, but the use of an Orion voltage converter prevents such problems. Next to converters from 24V to 12V, a wide range of other models is available. Warranty: 5 years NON ISOLATED - IP67 ORION CONVERTERS 56 ORION IP67 DC-DC CONVERTERS INPUT VOLTAGE OUTPUT MA OUTPUT TEMPERATURE DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE - VDC CURRENT CONTROL HxWxD mm ( ) kg (lbs) Orion IP67 24/ J no 25x43x20 (1.0x1.7x0.8) 0,5 (1.1) Orion IP67 24/ L no 74x74x32 (2.9x2.9x1.3) 3,0 (6.6) Orion IP67 24/ N no 74x74x32 (2.9x2.9x1.3) 3,0 (6.6) NON ISOLATED ORION CONVERTERS ORION DC-DC INPUT VOLTAGE OUTPUT MA OUTPUT TEMPERATURE DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE - VDC CURRENT CONTROL HxWxD mm ( ) kg (lbs) Orion 12/ G no 45x90x115 (1.8x3.5x4.5) 0,4 (0.8) Orion 12/ E no 45x90x115 (1.8x3.5x4.5) 0,4 (0.8) Orion 12/ Y yes 65x88x195 (2.6x3.5x7.7) 0,9 (2.0) Orion 24/ E no 65x88x160 (2.6x3.5x7.3) 0,7 (1.55) Orion 24/ C ,2 40 yes 65x88x185 (2.6x3.5x7.3) 0,85 (1.9) Orion 24/ C yes 65x88x195 (2.6x3.5x7.7) 0,9 (2.0) To obtain 120A, it is possible to connect in parallel two 24/12-60 units. NON ISOLATED ORION-TR CONVERTERS ORION-TR DC-DC INPUT VOLTAGE OUTPUT MA OUTPUT CONT. OUTPUT DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE - VDC CURRENT CURRENT HxWxD mm ( ) kg (lbs) Orion-Tr 24/ H x51x27 (2.1x2x1.1) 0,09 (0.2) Orion-Tr 24/ K x94x37 (2.9x3.7x1.5) 0,2 (0.44) Orion-Tr 24/ K x94x37 (2.9x3.7x1.5) 0,25 (0.55) Orion-Tr 24/ M x94x37 (2.9x3.7x1.5) 0,25 (0.55)

59 VICTRON ENERGY - DC-DC CONVERTERS ISOLATED ORION CONVERTERS UF ISOLATED ORION DC-DC INPUT VOLTAGE OUTPUT MA OUTPUT TEMPERATURE DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE - VDC CURRENT CONTROL HxWxD mm ( ) kg (lbs) Orion 12/ F yes 82x132x190 (3.2x5.2x7.5) 1,4 (3.1) Orion 12/ H yes 82x132x190 (3.2x5.2x7.5) 1,4 (3.1) Orion 24/ K yes 82x132x190 (3.2x5.2x7.5) 1,4 (3.1) Orion 24/ M yes 82x132x190 (3.2x5.2x7.5) 1,4 (3.1) Orion 24/48-7, N ,5 yes 82x132x190 (3.2x5.2x7.5) 1,4 (3.1) Also available 96V and 110V versions ISOLATED ORION-TR CONVERTERS 57 DC-DC CONVERTERS ISOLATED ORION-TR DC-DC INPUT VOLTAGE OUTPUT MA OUTPUT DIMENSIONS WEIGHT MODEL PART No. RANGE VOLTAGE - VDC CURRENT EFFICIENCY HxWxD mm ( ) kg (lbs) Orion-Tr 12/ U ,5 87% 100x113x47 (3.9x4.5x1.9) 0,6 (1.3) Orion-Tr 12/ J % 130x186x70 (5.1x7.3x2.8) 1,3 (2.9) Orion-Tr 12/ Y ,3 88% 100x113x47 (3.9x4.5x1.9) 0,6 (1.3) Orion-Tr 12/ Y ,5 88% 130x186x70 (5.1x7.3x2.8) 1,3 (2.9) Orion-Tr 24/ A ,5 85% 100x113x47 (3.9x4.5x1.9) 0,6 (1.3) Orion-Tr 24/ A % 130x186x70 (5.1x7.3x2.8) 1,3 (2.9) Orion-Tr 24/ T ,3 87% 100x113x47 (3.9x4.5x1.9) 0,6 (1.3) Orion-Tr 24/ N % 130x186x70 (5.1x7.3x2.8) 1,3 (2.9) ISOLATED CONVERTER AND BATTERY CHARGER: ORION 12/27,6-12 MODEL PART No. INPUT OUTPUT MA AMP Orion 12/27, M 9-18 V V 12 A

60 UF 58 ACCESSORIES VICTRON ENERGY - BATTERY ISOLATORS Battery isolators allow simultaneous charging of two or more batteries from one alternators, without connecting the batteries together. Discharging the accessory battery, for example, will not result in discharging the starter battery. ARGO DIODE BATTERY ISOLATORS The Argo battery isolators feature a low voltage drops thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3V and at the rated output approximately 0,45V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. Warranty: 5 years ARGO Alternator energize input Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new diode isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed. MA CHARGE ALTERNATOR No. of DIMENSIONS WEIGHT MODEL PART No. CURRENT MA CURRENT BATTERIES H x W x D mm ( ) kg (lbs) 80-2AC R 80 A 80 A 2 60 x 120 x 90 (2.4 x 4.7 x 3.5) 0.6 (1.3) 100-3AC K 100 A 100 A 3 60 x 120 x 115 (2.4 x 4.7 x 4.5) 0.8 (1.8) 120-2AC M 120 A 120 A 2 60 x 120 x 115 (2.4 x 4.7 x 4.5) 0.8 (1.8) 140-3AC P 140 A 140 A 3 60 x 120 x 150 (2.4 x 4.7 x 6.0) 1.1 (2.4) 160-2AC S 160 A 160 A 2 60 x 120 x 150 (2.4 x 4.7 x 6.0) 1.1 (2.4) 180-3AC U 180 A 180 A 3 60 x 120 x 200 (2.4 x 4.7 x 7.9) 1.5 (3.3) ARGO FET BATTERY ISOLATORS: NO VOLTAGE LOSS Differently from diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less then 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET battery isolators, there is no need to also increase the output voltage of the alternator. Care should be taken however to keep cable lengths short and of sufficient cross section. Warranty: 5 years Alternator energize input The new ARGO FET isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed. ARGO FET MA CHARGE ALTERNATOR No. of DIMENSIONS WEIGHT MODEL PART No. CURRENT MA CURRENT BATTERIES H x W x D mm ( ) kg (lbs) 1002-FET W 100 A 100 A 2 65 x 120 x 200 (2.6 x 4.7 x 7.9) 1.4 (3.1) 1003-FET E 100 A 100 A 3 65 x 120 x 200 (2.6 x 4.7 x 7.9) 1.4 (3.1) 2002-FET G 200 A 200 A 2 65 x 120 x 200 (2.6 x 4.7 x 7.9) 1.4 (3.1) 2003-FET J 200 A 200 A 3 65 x 120 x 200 (2.6 x 4.7 x 7.9) 1.4 (3.1)

61 VICTRON ENERGY - ACCESSORIES UF BATTERY MONITORS The BMV monitors feature an advanced microprocessor control system combined with high resolution measuring system for battery voltage and charge/discharge current. It can display: voltage, charge/ discharge current, state of charge of the battery (in Ah or %), remaining charge. Standard with connection cables and shunt. Warranty: 5 years Mounting hole: 52 mm (2 ) BMV A monitoring 1 battery 6,5-95 VDC BMV L monitoring 2 batteries 6,5-95 VDC BMV 702 BLACK D monitoring 2 batteries 6,5-95 VDC BMV 712 Smart Z monitoring 2 batteries - Bluetooth included Temperature Sensor M Temperature sensor for BMV 702 Smart battery Sense T Wireless battery voltage and temperature sensor for MPPT chargers WALL MOUNT BMV 712 Smart Smart Battery Sense 59 ACCESSORIES WM BMV-MPPT WM BMV-CC WM CC WM BMV-MPPT B - Wall mount enclosure for BMV or MPPT Control WM BMV-CC K - Wall mount enclosure for BMV and Color Control G WM CC M - Wall mount enclosure for Color Control G CONNECTION ACCESSORIES VE.Direct to USB interface W Interface MK3-USB (VE.Bus to USB) H VE.Direct Bluetooth Smart dongle E W H E

62 UF VICTRON ENERGY - REMOTE CONTROL PANELS AND CONNECTION CABS 60 ACCESSORIES DMC - Digital Multi Control G PHOENI CC CONTROL PANELS MODEL PART No. DESCRIPTION DMC 200/ W Digital Multi Control 200/200 DMC 200/200 G Y Digital Multi Control 200/200 G Phoenix CC Charger E Phoenix Charger Control panel Phoenix Inverter K Phoenix Inverter Control panel Skylla-i E Skylla-i Control G panel Skylla CC G Skylla Control panel CW J On-Off Skylla switch Battery Alarm G L Battery alarm panel Wifi Module Simple H CCG and VG Wifi Module Simple Wifi Long Range K CCG and VG Wifi Long Range Module ACCESSORIES AND CAB CONNECTIONS MODEL PART No. DESCRIPTION MK2-USB H Interface for Phoenix battery charger only RS485-USB - 1, RS485-USB 1,8 m cable (Meter to CCG) RS485-USB Z RS48 -USB 5 m cable (Meter to CCG) VE.Direct Cable 0, T VE.Direct cable - 0,9 m (CCG to BMV70x) VE.Direct Cable 1, E VE.Direct cable - 1,8 m (CCG to BMV70x) VE.Direct Cable Y VE.Direct cable - 5 m (CCG to BMV70x) RJ45-UTP - 0, P VE.Can, VE.Bus, VE.Net cable - 0,9 m RJ45-UTP - 1, U VE.Can, VE.Bus, VE.Net cable - 1,8 m RJ45-UTP V VE.Can, VE.Bus, VE.Net cable - 5 m RJ45-UTP VE.Can, VE.Bus, VE.Net cable - 10 m VE.CAN Term ZA VE.CAN terminator pair ON-OFF Cable G On-Off inversion cable BYD-Cable K CCG/VG and BYD batteries connection cable

63 SISTEMI DI MONITORAGGIO VICTRON ENERGY COLOR CONTROL G The Color Control G provides intuitive control and monitoring for all products connected to it. The list of Victron Energy products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more. Warranty: 5 years COLOR CONTROL G W Digital Remote Control VENUS G The Venus G provides intuitive control and monitoring for all products connected to it. The list of Victron Energy products that can be connected is endless: Inverters, Multis, Quattros, MPPT solar chargers, BMV battery monitors, Lynx Ion + Shunt and more Warranty: 5 years VENUS G E - Control Panel Color Control G Venus G 61 UF ACCESSORIES MODEL COLOR CONTROL G VENUS G LCD display and 7 buttons yes no Remote console yes yes VE.Direct 2 separate VE.Direct ports isolated 2 separate VE.Direct ports isolated VE.Can 2 paralleled RJ45 sockets isolated 2 paralleled RJ45 sockets isolated VE.Bus 2 paralleled RJ45 sockets isolated 2 paralleled RJ45 sockets isolated USB 2 USB Host ports not isolated 2 USB Host ports not isolated Ethernet 10/100/1000MB RJ45 socket 10/100/1000MB RJ45 socket isolated except shield isolated except shield WiFi optional built-in Bluetooth Smart no coming soon Slot micro SD card SDHC cards up to 32GB SDHC cards up to 32GB Second CAN-bus port no coming soon Programmable relay 1x NO 1x NO / NC Resistive tank level inputs no 3 Temperature level inputs no 2 Digital IO no coming soon Dimensions HxWLxD mm ( ) 130x120x28 (5.1x4.7x1.1) 45x143x96 (1.8x5.6x3.8) Operating temperature -20 to +50 C -20 to +50 C Safety EN EN EMC EN , EN , EN , EN , EN , EN , EN EN , EN , EN Automotive E4-10R in progress

64 UF 62 ACCESSORIES VICTRON ENERGY - ACCESSORIES CYRI - MICROPROCESSOR CONTROLD BATTERY COMBINER The Cyrix battery combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a preset voltage (indicating that the battery has been charged) and disconnects when the voltage decreases below float level (indicating that one or more batteries have been discharged). No voltage loss Cyrix battery separators are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased. Prioritising the starter battery When a Ciryx senses that the starter battery has reached its connect voltage will engage, to allow for parallel charging of the other batteries. Bidirectional voltage sensing The Ciryx senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery has been charged by a battery charger. Parallel connection in case of emergency The Cyrix can also be engaged with a switch to connect manually batteries in parallel. This is especially useful in case of emergency when the starter battery is discharged or damaged. Warranty: 5 years CYRI CONTINUOUS PEAK CONNECT DISCONNECT DIMENSIONS WEIGHT MODEL PART No. CURRENT CUR- VOLTAGE VOLTAGE H x W x D mm ( ) kg (lbs) A RENT V CT 12/ B 120 A 180 A CT 12/ H 230 A 500 A i 12/ F 400 A 2000 A i 24/ G 400 A 2000 A V V 46 x 46 x and V and V (1.8 x 1.8 x 3.2) (0.24) V V 65 x 100 x and V and V (2.6 x 3.9 x 2.0) (0.66) V 10, V 78 x 102 x and V and V (3.0 x 4.0 x 4.3) (1.9) V 10, V 78 x 102 x and V and V (3.0 x 4.0 x 4.3) (1.9) 65A/100A/220A BATTERY PROTECTION The Victron battery protection disconnects the battery from non essencial loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. Warranty: 5 years BP-65 BP-100 BP-220 MA CONTINUOUS PEAK OPERATING LOAD DISCONNECT DIMENSIONS WEIGHT MODEL PART No. CURRENT CURRENT VOLTAGE RANGE DELAY H x W x D mm ( ) kg (lbs) BP W 65 A 100 A 6-35 V 1 minute BP Y 100 A 600 A 6-35 V 1 minute BP A 220 A 600 A 6-35 V 1 minute BP M 100 A 250 A V 90 seconds 40 x 48 x (1.6 x 1.9 x 4.2) (0.5) 59 x 42 x (2.4 x 1.7 x 4.6) (1.3) 62 x 123 x (2.5 x 4.9 x 4.8) (1.8) 62 x 123 x (2.5 x 4.9 x 4.8) (1.8)

65 BATTERY BALANCER The Battery Balancer equalizes the state of charge of two series connected 12 V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24 V battery system increases to more than 27 V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1 A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed, several balancers can be paralleled. A 48 V battery bank can be balanced with three Battery Balancers. Warranty: 5 years IP22 protection Series connection FUSES FT/FV F A fuse FT/FV Z A fuse FRONIUS - GRID-CONNECTED INVERTERS The solar energy is converted into current and fed into the public grid. The core of each photovoltaic system consists of efficient, reliable and high-performance inverters. To develop technologies for photovoltaic inverters, Fronius has thoroughly studied, sought innovative solutions and find answers entirely new. The result: grid-connected inverters highly functional, perfect for use with any type of solar modules. FRONIUS GALVO FRONIUS PRIMO FRONIUS SYMO n Single-phase inverter from 1,5kW to 3,1kW. Parallel connection MODEL Part No. Input voltage range n Single-phase inverter from 3,0kW to 8,2kW with WLAN and integrated communication package. ACCESSORIES n Accessories and components for solar systems and fastly PV systems data. BATTERY BALANCER R Up to 18V per battery, 36 V total Turn on level 27,3 V +/- 1% Turn off level 26,6 V +/- 1% Stand-by current draw Midpoint deviation to start balancing Max. balancing current Alarm trigger level Alarm reset level Alarm relay Alarm relay reset Over temperature protection Operating temperature Dimensions mm ( ) 0,7 ma 50 mv 0,7 A (when deviation > 100mV) 210 mv 140 mv 60 V / 1A Two terminals to connect a push button Yes -30 C to +50 C 100x113x47 (3.94x4.45x1.85) Weight kg (lbs) 0,4 (0.88) FT/FV M A fuse PFH/FV B - Fuse holder n Three-phase inverter from 3,0kW to 20kW. UF 63 ACCESSORIES - GRID CONNECTED INVERTERS FRONIUS SOLAR.WEB APP n Free applications to display easily and fastly PV systems data. ETENDED WARRANTY n Extended warranty available: 10, 15 or 20 years. For more information about configuration and size, please contact our Technical Service.

66 UF BEP MARINE BATTERY DISTRIBUTION SWITCHES BEP MARINE BATTERY SWITCH TEST PROCEDURES (UL 1107) Continuous (1 hour) intermittent (5 minutes) and cranking (engine starting 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 C above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested independently to this specification by a 3rd party laboratory. 64 BATTERY DISTRIBUTION SWITCHES 701 BATTERY MASTER SWITCH C The 701 Contour Battery Master Switch offers a number of unique features. The highlights being the patented contour lock system, allowing it to be a stand alone unit, or locked together with other switches. The 701 also features a control knob which cannot be removed whilst in the On or OFF position, however can be removed by switching to an anti-clockwise 45 position. The control knob also features an interchangeable labelling system allowing a full range of applications Set-715 (page 133). The 701 also features removable side plates on 4 sides for access of up to 1/0 cables. Plus a rear cover insulating the rear terminals against any short circuits ensuring the switch meets ABYC requirements. The 701 can be either surface or recess mounted by cutting a 52 mm (2 1 /16 ) hole. FEATURES: n Continuous rating: 275 Amp DC n Intermittent rating: 455 Amp DC n Cranking rating: 1250 Amp DC n Voltage rating: 48V DC n Operation: ON/OFF n Mounting: recessed or surface n Termination stud size: 2 x 10 mm (3/8 ) n Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches) n Tin plated copper studs and nuts n Ignition protected 701-PM PANEL MOUNT BATTERY SWITCHES Same specifications as 701 switch 701-KEY E Spare Part Removable knob Dimensions 701 Standard BEP interchangeable label system Countersunk recess for surface mount application 701 Mod. 701 Dimensions PM Removable key Standard 52,4 mm (2 1 /16 ) hole cut out

67 BEP MARINE BATTERY DISTRIBUTION SWITCHES 720 HEAVY DUTY BATTERY SWITCH S The 720 Heavy Duty Battery Switch fits into the same contour lock system as used on the battery distribution system. Rated at 600 Amp continuous and 2500 Amp cranking. It is well suited to larger vessels. As with the 701 and 720 can be recessed or surface mounted. The 720 uses the same style of self cleaning sliding contact as used in the 701. Also utilises the same label sheet as 701. Part Number 715. UF FEATURES: n Continuous rating: 600 Amp DC n Intermittent rating: 800 Amp DC n Cranking rating: 2500 Amp DC n Voltage rating: 48V DC n Operation: ON/OFF n Mounting: recessed or surface n Termination stud size: 2 x 12 mm (1/2 ) n Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches) n Tin plated copper studs and nuts n Ignition protected n Available in bulk only 720-DP/B DOUB PO BATTERY SWITCH A This model has the same dimensions and features as the 720 battery switch. The 720-DP also meets the needs of vessels being built to survey requirements where positive and negative supplies must be isolated at the same time. FEATURES: n Continuous rating: 400 Amp DC n Intermittent rating: 525 Amp DC n Cranking rating: 1500 Amp DC n Voltage rating: 45V DC n Operation: ON/OFF 2 poles n Mounting: recessed or surface n Termination stud size: 4 x 10 mm (3/8 ) n Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches) n Tin plated copper studs and nuts n Ignition protected n Available in bulk only 700 EASYFIT BATTERY SWITCH J The 700 Easyfit is ideal on those installations where switches need to be recessed through varying thickness of panels. 700 Easyfit features an easily removable threaded ring allowing for panel thickness up to 19 mm (3/4 ). It uses the same features as the 701 with the removable key 45 past the off position, labelled handle and a removable back cover covering exposed terminals to meet ABYC specifications. The switch can also be surface mounted offering a unique style compared to other switches available on the market. The 700 Easyfit can easily be retrofitted in place of most European post and lever type switches. Recessed hole cut out 85 mm (3.3 ) 720, 720-DP/B Dimensions 720-DP/B BATTERY DISTRIBUTION SWITCHES FEATURES: n Continuous rating: 275 Amp DC n Intermittent rating: 455 Amp DC n Cranking rating: 1250 Amp DC n Voltage rating: 48V DC n Operation: ON/OFF n Mounting: recessed or surface n Termination stud size: 2 x 10 mm (3/8 ) n Tin plated copper studs and nuts n 700-KEY spare Part Removable knob n Ignition protected 700 EASYFIT 700 EASYFIT Dimensions

68 UF BEP MARINE BATTERY DISTRIBUTION SWITCHES 701-S MINI BATTERY SECTOR SWITCH R 66 The 701-S is the most compact selector switch available on the market. Housed in the same dimensions as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries. Please note this system will not separate electronics from harmful engine starting spikes. BATTERY DISTRIBUTION SWITCHES FEATURES: n Continuous rating: 200 Amp DC n Intermittent rating: 300 Amp DC n Cranking rating: 1000 Amp DC n Voltage rating: 48V DC n Operation: Selector 1-2-both-off n Mounting: recessed or surface n Termination stud size: 3 x 8 mm (5/16 ) n Dimensions: 69 x 69 x 75h mm (2.75 x 2.75 x 3h inches) n Tin plated copper studs and nuts 701S-PM PANEL MOUNT BATTERY SWITCHES C Same specifications as 701S switch Countersunk recess for surface mount application Standard 52,4 mm (2 1 /16 ) hole cut out Recessed hole cut out 52 mm (2.1 ) 701-S dimensions 701S-PM dimensions 701-S 721 BATTERY SECTOR SWITCH E The 721 is our heavy duty selector switch, housed in the same module as the 720 and includes the same removable plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 721 offers a simple economical way of separating two batteries. Please note this system will not separate electronics from harmful engine starting spikes. FEATURES: n Continuous rating: 350 Amp DC (between common and B1 or B2) n Continuous rating: 500 Amp Dc (between common and B1 or B2) n Intermittent rating: 500 Amp DC n Cranking rating: 1500 Amp DC n Voltage rating: 48V DC n Operation: Selector Battery 1-2-both off n Mounting: recessed or surface n Termination stud size: 3 x 10 mm (3/8 ) n Dimensions: 102 x 102 x 90h mm (4 x 4 x 3.5h inches) n Tin plated copper studs and nuts n Ignition protected Recessed hole cut out 85 mm (3.3 ) dimensions

69 BEP MARINE - REMOTE OPERATED BATTERY SWITCHES Due to the increased loading requirements on modern boats and large increases in the cost of copper battery cable, the MD range of battery switches allows you to mount the battery switch very close to the battery, reducing cable lengths to starter motor. They are also ideal for remote isolation of bow thrusters. THE MD RANGE OFFERS THE FOLLOWING FEATURES: n Remote operation (easier access for battery control). n Battery switch can be mounted alonside battery, reducing cable lengths and cable sizes to starter motor (large cost saving in copper cable). n Reduced labour for fitting, due to shorter battery cabling. n Manual override option to meet CE requirements. n D status identification for remote control switch. n Same capacity/specification and mounting options as standard BEP battery switches. n Utilize same interchangeable labelling system as BEP battery switches. For the remote operation of the 701-MD and 720-MD battery switches, use the key switches 722-KS or 722-KS2 (page 133) or any standard on/ off switch. 701-MD SPECIFICATIONS S n Continuous rating: 275 Amp DC n Intermittent rating: 455 Amp DC n Cranking rating: 1250 Amp DC n Voltage rating: 9,5 32 Volt n Operation: On / Off n Mounting: recessed or surface n Ignition protected n Stud size: 2 x 10 mm (3/8 ) n Tin plated copper studs and nuts 720-MDO SPECIFICATIONS U n Continuous rating: 500 Amp DC n Intermittent rating: 700 Amp DC n Cranking rating: 2500 Amp DC n Voltage rating: 9,5 32 Volt n Operation: On / Off n Mounting: recessed or surface n Ignition protected n Stud size: 2 x 12 mm (1/2 ) n Tin plated copper studs and nuts WIRING DIAGRAM 701-MD 701-MD dimensions 720-MDO 720-MDO dimensions UF 67 BATTERY DISTRIBUTION SWITCHES Optical sensor benefits (720-MDO only) n Can be used to switch in positive or negative lines n Low stand by current draw (7mA). Zero if aux control switch used (See instructions). n Main contacts isolated from control circuit allowing operation via another battery source MDO

70 UF BEP MARINE DUAL BATTERY CHARGING VOLTAGE SENSITIVE RELAYS(VSR) The VSR switch utilizes the same operation as the MD battery switches and is packed with features which complimet the MD rang 68 VOLTAGE SENSITIVE RELAYS FEATURES: n Dual battery sensing n Remote emergency parallel function 701-MDVS and 720-MDVS can be operated through a momentary button on the dash which will parallel the batteries for a present time of 10 minutes. Once this 10 minutes has passed, if the voltage is up high enough for the voltage sensitive switch to operate, it twill stay engaged. If not, it will discharge. n Engine run sensing VSR will engage when the voltage on either start or house battery reaches 13,7 Volt. If the combined battery voltage drops below 13,0 Volt and the engine is not running, after 5 seconds the contacts will open and stay open until the start or house battery voltage exceeds 13,7 Volt. If the combined battery voltage drops below 12,2 Volt and the engine is running, after 5 minutes the contacts will open and stay open until the start or house battery voltage exceeds 13,7 Volt. If voltage drops below 13,0 Volt and stays above 12,2 Volt on either start or house battery while engine is running, the VSS will stay engaged. n Manual override option n The VSR will cover your dual battery charging requirements and emergency parallel operation in one unit 701-MDVS and Same specifications as 701-MD 720-MDVS and 720-MDO-EP Same specifications as 720-MD MODEL PART No. VOLT RATING ENGAGES DISENGAGES 720-MDVS-12V H 12 VDC 500 A 13.7 VDC VDC 701-MDVS-24V K 24 VDC 275 A 27.4 VDC VDC 720-MDVS-24V M 12/24 VDC 500 A Emergency parallel only H 12/24 VDC 275 A Emergency parallel only 720-MDO-EP /24 VDC 500 A Emergency parallel only

71 BEP MARINE DUAL BATTERY CHARGING VOLTAGE SENSITIVE RELAY UF A - DIGITAL VOLTAGE SENSING RELAY (DVSR) The Voltage Sensing Relay (VSR) allows the charging of a second battery from a single charging source. When the voltage on the start battery rises to a level indicating a 60% charge, the VSR engages allowing the 2nd battery to charge. When charging stops and voltage falls, the VSR will disengage isolating the two battery banks from each other. Dual sensing functionality enables the sensing of two battery banks allowing two way charging. n Safely charge two or more indipendent battery banks from one charge source (alternator, battery charger.) n Protects start batteries from becoming flattened by domestic loads n Simple to install 3-wire connection, leaves alternator wiring intact n No Volt drop vs. diode isolators n Zero stand by current draw n Multi voltage, auto selects between 12 and 24V DC operation n Ignition protected n Surface or panel mountable Replace previous models A and A-DS MODEL A PART No P VOLT 12V DC/24 VDC APPLICATION For use on charging system up to: 140 Amp DIMENSIONS mm ( ) H x L x P A 69 x 69 x 50 (2.75 x 2.75 x 2) 69 VOLTAGE SENSITIVE RELAYS

72 UF BEP MARINE REMOTE BATTERY MANAGEMENT SYSTEM 70 BATTERY DISTRIBUTION COMPONENTS BATTERY SWITCH CONTROL CENTER (BCC) F Sophisticated electrical systems need reliable automation. It is possible to centralize power handling with BEP Battery Control Center (BCC) that can control all battery switches from one convenient position. FEATURES n The BCC is equipped with locks that ensures group operation at the turn of the key. Any switch can be isolated cy disengaging its lock and toggling the switch off n Isolate each battery via key switch or designated battery banks via breaker. n D Status indicators for battery switch status. BATTERY DISTRIBUTION COMPONENTS GALVANIC ISOLATORS PROSAFE SERIES MODEL n Prevent galvanic corrosion due to dissimilar metals between boats n Gold plated terminals provide superior corrosion resistance to marine environment n Block DC current from flowing through shore power cable n Ignition protected PART No Z F B DESCRIPTION Single engine remote Dual engine remote Triple engine remote PROSAFE FS30 PROSAFE FS60 MODEL PART No. AMP VOLTAGE FREQUENCY OPERATING TEMPERATURE DIMENSIONS mm ( ) WEIGHT kg (lbs) ProSafe FS D 30A 120/240V 50/60 Hz max 50 C 171,5 x 177,8 x 63,5 (6.75 x 7 x 2.5) 1,4 (3) ProSafe FS60 50A single cable F 120/240V 60A dual cable 50/60 Hz max 50 C 184,2 x 165,1 x 95,3 (7.25 x 6.5 x 3.75) 1,7 (3.7)

73 BEP MARINE - BATTERY DISTRIBUTION CLUSTER 715-V DUAL BATTERY CHARGING CLUSTERS To be used on following systems: n Single outboard dual battery bank n Single alternator dual battery bank n Twin alternator dual battery bank UF 715-V 716-SQ-140A-DVSR DUAL BATTERY CHARGING CLUSTERS For use on charging systems up to 150A. To be used on following systems: n Single outboard dual battery bank n Single alternator inboard engine dual battery bank 715-S DUAL BATTERY CHARGING CLUSTERS The 715-S is designed for systems with twin engines and 2 batteries. The house loads can be switched between port and starboard battery. The selector switch can also be used to parallel the batteries when in both position A-DVSR THREE BATTERY CHARGING CLUSTERS This system is designed for twin outboard installations using outboards without AU outputs. It will allow the port engine to charge the port start battery and the house battery when the VSR is engaged. It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine. 716-SQ-140A-DVSR Single inboard or outboard engine/2 banks 716-SQ-140A-DVSR 715-S A-DVSR MODEL PART No. ENGINE/BATTERIES ORIENTATION DIMENSIONS mm ( ) L x H 715-V Single inboard or outboard engine/2 banks RECTANGULAR 207 x 69 (8.1 x 2.75) SQUARE 138 x 138 (5.4 x 5.4) 715-S A Twin inboard or outboard engine/2 banks RECTANGULAR 138 x 69 (5.4 x 2.75) A-DVSR S U Twin outboard engine/3 banks RECTANGULAR 207 x 138 (8.1 x 5.4) 71 BATTERY DISTRIBUTION COMPONENTS 716-SQ-140A-DVSR A-DVSR

74 UF BEP MARINE BATTERY DISTRIBUTION COMPONENTS 72 BATTERY DISTRIBUTION COMPONENTS 702 DISTRIBUTION STUD The 702 Contour Distribution Stud allows terminating of heavy duty cables for 1 or more connections. Contour lock housing has removable side plates which allow for connections from all sides, utilising link bars 702SB. 702SB Secondary Bus Fitted to distribution stud 702 allows for small wire connections without cluttering main stud. Terminal screws SB K mm (1/8 ). 702SB MODEL A PART No Y STUD SIZE 10 mm (3/8 ) DIMENSIONS mm ( ) 69 x 69 x 50 (2.71 x 2.71 x 2) S 10 mm (3/8 ) 300A 138 x 69 x 50 (5.4 x 2.71 x 2) A A 10 mm (3/8 ) 500A 69 x 69 x 50 (2.71 x 2.71 x 2) AMP 200A BUS BARS Marine grade negative or positive Bus Bars are supplied as standard with all BEP AC/DC control panels FEATURES: n 4 mm (5/32 ) stainless steel screws with shakeproof washers n 2x6 mm (1/4 ) input stud n Tin plated brass n Insulated mounting base MODEL BB-6W-2S BB-12W-2S BB-24W-2S PART No L N OUTPUT SCREWS 4 mm (5/32 ) 6 INPUT STUDS 6 mm (1/4 ) CURRENT RATING 100A 100A R A BB-6W-2S BB-12W-2S BB-24W-2S A INSULATED STUDS FEATURES: DIMENSIONS W x H x D mm ( ): n Tinned copper 10 mm (3/8 ) or brass studs 6 mm (1/4 ) with spring washers n High temperature plastic insulated mounting base n IS-10MM-1: 44x35x18 mm (1.73x1.37x0.7) n IS-6MM-2: 42x32x36 mm (1.65x1.25x1.42) IS-10MM H IS-6MM C

75 BEP MARINE BATTERY DISTRIBUTION COMPONENTS 702-MFH AND 702-HDBFH SING FUSE HOLDER UF BEP Marine s new heavy duty fuse holders are an economical way of fusing heavy loads amp. Ideal for battery charger outputs or mains feeds. 6 mm (1/4 ) studs receive ring terminals and cables up to 25 mm 2 (4 gauge). Fuse is clamped between tinned brass clamp for positive connection. Covers enclose exposed terminals to meet ABYC standards MODEL PART No. STUD SIZE DIMENSIONS mm ( ) MFH H 6 mm (1/4 ) 71 x 53 x 36 (2,8 x 2 x 1.42) HIGH AMPERAGE FUSES n Fuses available Amp n Interrupt capacity: 1000 Amp DC n Maximum voltage: 32 Volt DC MODEL BFHD-30A BFHD-40A BFHD-50A PART No R T V 704-ANL FUSE HOLDER HEAVY DUTY K RATING 30 Amp 40 Amp 50 Amp HEAVY DUTY FUSES MODEL BFHD-60A BFHD-70A BFHD-80A The 704-ANL allows fusing of heavy duty accessories between 80 Amp Amp. Mounted in contour lock mouldings with removable sides. PART No Z B 702-MFH RATING 60 Amp 70 Amp 80 Amp Fuse viewing window BATTERY DISTRIBUTION COMPONENTS ANL-FUSE 704-ANL 704-ANL MODEL PART No. ANL FUSE LINKS DIMENSIONS mm ( ) IP100A P 100 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP150A D 150 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP200A F 200 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP250A H 250 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP300A K 300 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP425A U 425 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IP500A U 500 Amp 138 x 69 x 50 (5.4 x 2.75 x 2) IGNITION PROTECTED

76 UF BEP MARINE ATC FUSE HOLDERS Clip on cover with label position for each fuse 74 BATTERY DISTRIBUTION COMPONENTS The BEP ATC fuse holder includes the patented contour lock system (as used in all BEP battery management products). This allows you to module as many fuse holders as you like together. The advantage of this is that it allows you to link the inputs together, or split them apart to allow multiple power groups within one fuse holder: eg. switched supply or 24 hour supply. For the aftermarket the modular system allows you to carry one part number instead of 3 or 4. The 6W-ATC also includes a clip on cover and label positions. The lebel positions receive the same label as the 1000 series panels (ordered separately). SPECIFICATIONS n Maximum amperage per circuit: 30 Amp n Maximum amperage per block: 100 Amp n Maximum voltage: 32V DC n Base material: polycarbonate n Cover material: clear polycarbonate MODEL ATC-6W ATC-6WQC PART No C R ATC FUSE HOLDERS DESCRIPTION ATC-6W ATC-6W Dimensions 6 way fuseholder, screw terminals, with cover 6 way fuseholder, quick connect, with cover MODEL J03A J05A J7.5A PART No T V D ATC FUSES RATING 3 Amp 5 Amp 7.5 Amp Position for spare fuses Available with screw terminal or 6,3 mm Quick Connect options (see part numbers below) Fuse holder link Part No L BB-LINK-26 mm Ordered separately J10A J15A J20A F H K 10 Amp 15 Amp 20 Amp J05A J25A M 25 Amp J30A P 30 Amp BB-LINK - 26 mm SPECIFICATIONS n Fuses available: 3-30 Amp n Interrupt capacity: 1000 amp DC n Maximum voltage: 32 Volt DC J05A Dimensions

77 BEP MARINE - PRO INSTALR EZ-MOUNT BATTERY SECTOR SWITCHES As easy as 1,2,3, these revolutionary battery switches allow you to wire from the front. Never has been so easy and cabling so accessible. With their shared interconnection height, Pro Installer-EZ-Mount battery switches cluster directly with the Pro Installer Busbar Range,resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the new benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. The outstanding performance and features of this powerful new generation battery switch appeal to both the installer and user. All ratings, footprints and features of the Pro Installer-EZ-Mount switches match the high quality of our standard switches. FEATURES n Continuous rating: 400 Amp DC n Intermittent rating: 600 Amp (5 mins) n Cranking rating: 1500 Amp (10 secs) n Waterproof to IP66 n Tinned copper 10 mm (3/8 )studs n Stainless steel washers/nuts n Fiber reinforced plastics n Same interconnection height as Pro Installer n Removable knob allows isolation during servicing n 3 removable sideplates for protection n Industry standard 3.85 x 3.85 footpriny n Dimensions mm ( ): 97.8 x 97.8 (3.85 x 3.85) n Tested to UL1107 ignition protection, CE 770-EZ-400A A - On/off master switch EZ-MOUNT 770-DP-400A Y - DOUB PO, on/off master switch 770-DP-EZ-400A A - DOUB PO on/off master switch EZ-MOUNT 771-S-EZ-400A J - Selector battery switch EZ-MOUNT 771-S-400A C - Selector battery switch 772-DBC-EZ-400A U- Dual bank control battery switch EZ-MOUNT 771-SFD-400A E - Selector battery selector with alternator switch disconnect 770-EZ-400A 771-S-EZ-400A UF 75 BATTERY SECTOR SWITCHES 770-DP-400A DP-EZ-400A 771-S-400A S-EZ-400A 772-DBC-EZ-400A 771-SFD-400A

78 UF BEP MARINE - Z-BARS 76 BATTERY SECTOR SWITCHES This patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link, or used as separate positive/negative bars. FEATURES: n Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders to save installation time and space n Clean installation all cables can be run from one side of the Z-bar n Innovative clear covers insulate/protect on three sides, with snap outs for extra cable access as required n Label recess on cover allows fitting up to ½ width (12.7mm) printed labels n Insert molded studs offer superior mechanical strength n Designed for the harsh marine environment SPECIFICATIONS: n 4x 6mm (1/4 ) studs n 10 x 4mm (5/32 ) terminals n 200A maximum per bar (2x 200A) n 50 VDC n High temperature, fibre reinforced plastic base provides strength and chemical resistance n Clear polycarbonate cover n Tinned CDA102 copper conductors, stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment n All threads are metric n Dimensions: 3.9 x 1.9 x 2.0 (98 x 49 x 51mm) n Weight: 6.7 Oz (189g) 777-BBZ18W BBZ10W-200 TERMINAL CONNECTING STUD MODEL PART No. Q.TY DIMENSIONS Q.TY DIMENSIONS AMPS DIMENSIONS mm ( ) mm ( ) mm ( ) 777-BBZ18W W 18 4 (5/32) 4 6x19 (1/4x3/4) 200A 147x49x51 (5.8x1.9x2.0) 777-BBZ10W Y 15 4 (5/32) 4 6x19 (1/4x3/4) 200A 98x49x51 (3.9x1.9x2.0)

79 BEP MARINE - HEAVY-DUTY BUSBARS UF Available in a broad range from 3-studs to 8-studs, Pro Installer busbars offer the installer greater flexibility to select busbars to match their load and space requirements. Compact footprints and modular designs allow for space saving and scalability. Robust construction, thicker copper conductors and additional mounting holes provide the basis for secure, reliable, electrical installations. The covers feature snap-out side skirts providing additional cable entry as required, while the label recess provides the perfect landing for handheld-printer labels. It s easy linking to other Pro Installer products because of the common interconnection height, and the radiused busbar ends improve cable routing options for large cables. FEATURES: n Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders to save installation time and space n Radiused bar ends allow large cable attachment at any angle between -90º and +90º, to improve installation flexibility. Generous stud lengths n Innovative clear covers insulate/protect on three sides, with snap outs for extra cable access as required n Label recess on cover allows fitting up to ½ width (12.7mm) printed labels n Robust construction and additional mounting holes for ultimate security n Designed for the harsh marine environment n Plated brass nuts and stainless steel studs prevent thread galling if over-tightened SPECIFICATIONS: n 650A and 500A busbars 10mm (3/8 ) stainless steel studs n 50 VDC n High temperature, fibre reinforced plastic base provides strength and chemical resistance n Clear polycarbonate cover n Tinned CDA102 Copper conductors, stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment n All threads are metric BUSBARS 77 BATTERY DISTRIBUTION COMPONENTS CONNECTING STUD MODEL PART No. Q.TY DIMENSIONS mm ( ) AMPS DIMENSIONS mm ( ) 777-BB8S M 8 10x25 (3/8x1) 650A 249x48x66 (9.8x1.9x2.6) 777-BB5S P 5 10x25 (3/8x1) 650A 147x48x66 (5.8x1.9x2.6) 777-BB3S S 3 10x22 (3/8x7/8) 650A 99x48x63.6 (3.9x1.9x2.5) 777-BB4S U 4 8x22 (5./16x7/8) 500A 99x48x63.5 (3.9x1.9x2.5)

80 UF BEP MARINE - LINK BARS 78 BATTERY DISTRIBUTION COMPONENTS n A range of linking bars complement the Pro Installer range of products n High purity copper, tin plated for optimum marine electrical performance n Fastest, most economic way of connecting for the most compact installations n Saves space, allows clustering for the most compact installations n Links can be doubled for higher loads Application example Application example MA DIMENSIONS MODEL PART No. DESCRIPTION LINK AMPS mm ( ) LB Link bar mm Short Link Bar x25 (2.2x1.0) 8 & 10mm studs LB Z Link bar mm Medium Link Bar x25 (2.8x1.0) 8 & 10mm studs LBJ H Joiner 2-way mm Long Link Bar x25 (3.0x1.0) 8 & 10mm studs LBZ K Link Z Bar to Z Bar Joins Z Bars E:E and S:S x12 (2.0x0.5) LBZ M Link Z Bar to Busbar Joins Z Bars to x25 (2.1x1.0) or Fuseholder Busbar or FuseHolder LBJ S Joiner 3-way Side to Side joiner 3 products x25 (4.9x1.0) LBJ U Joiner 4-way Side to Side joiner 4 products x25 (6.9x1.0) LBJ W Joiner 5-way Side to Side joiner 5 products x25 (8.8x1.0) LBJ W Joiner 6-way Side to Side joiner 6 products x25 (10.8x1.0)

81 BEP MARINE - LINK BARS LINK BAR DIAGRAMS: UF E:E End to End linking S:E Side to End linking S:S Side to Side joining 79 Gap For small gaps between products C Centerline linking O Offset linking FOR HIGH LOAD LINK JOINER APPLICATIONS Links can be doubled for higher loads. Example: If 2 x 779-LBJ-5-B joiners are used in the diagram at right, quoted Amps can be doubled: maximum of 1300 Amps to the adjacent stud, or 1050 Amps to the stud 2 positions away from the feed cable. BUSBARS Heavy Duty Z Busbars Fuseholder Fuseholder Fuseholder Single Double EZ Mount Busbars 778ANL ANL ANL & insulated insulated battery Class T studs studs switch On/Off Heavy Duty Busbars LB-1 LBZ-2 LB-1 - LB-1 (4 Gap) LB-2 S:E LB-1 O: LB-2 Gap LB-1 C: LB-1 Z Bars LBZ-2 LBZ-1 LBZ-2 - LBZ-2 - Gap LBZ-2 LBZ-2 DISTRIBUTION COMPONENTS FUSEHOLDER 778ANL LB-1 LBZ-2 LB-2 - LB-1 LB-2 S:E LB-1 O: LB-2 Gap LB-1 C: LB-1 778ANLTP LB ANL2S LB-1 LBZ-2 LB-1 - LB-1 LB-2 S:E LB-1 O: LB-2 Gap LB-1 C: LB-1 INSULATED STUDS Single insulated stud LB-2 - LB-2 - LB-2 LBJ-2 LB-1 LBJ-2 C: LB-2 Double insulated studs S:E LB-1 Gap LBZ-2 S:E LB-1 - S:E LB-1 LB-1 S:S LBJ-2 O: LB-1 Gap LB-1 Gap LB-1 - Gap LB-1 Gap LB-1 C: Gap LB-1 EZ MOUNT BATTERY SWITCHES EZ ON/OFF O: LB-2 LBZ-2 LBZ-2 - O: LB-2 O: LBJ-2 O: LB-1 LB-1 C: LB-1 C: LB-1 - C: LB-1 C: LB-2 C: Gap LB-1 EZ Battery studs LB-2 (4 LBZ-2 LB-2 - O: LB-1 LBJ-2 LB-1 - studs LB-1) - C: LB-2 EZ Common studs O: LB-2 LBZ-2 O: LB-2 - O: LB-2 O: LBJ-2 O: LB-1 - C: LB-1 C: LB-1 C: LB-1 C: LB-2 C: Gap LB-1

82 UF BEP MARINE - INSULATED STUDS 80 The Pro Installer insulated studs are a smart choice for marine installers. Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables. DISTRIBUTION COMPONENTS FEATURES: n Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders saving installation time and space n Power tapping plate converts from a single stud, adding four connection points for smaller cables, while preserving access for larger cables n Generous stud lengths allow securing of three 95mm² (3/0) cable lugs n Innovative clear covers provide insulation/ protection, with snap outs for extra cable access as required n Label recess on cover allows fitting up to ½ width (12.7mm) printed labels n Snap out partition on double stud base provides insulation to separate studs for isolated (positive/negative) application. Snapping this partition allows easy linking of the studs n Insert moulded studs offer superior mechanical strength n Four mounting holes in base allow installer choice of using two, or four fastenings depending on level of securing required n Designed for the harsh marine environment IST-8MM-2S IST-8MM-1SPT SPECIFICATIONS: n Note: no power passes through the stud so no amp rating is given n 50 VDC n High temperature, fiber reinforced plastic base provides strength and chemical resistance n Clear poly carbonate cover n Stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment n All threads are metric n Double studs feature snap out insulating partition, to allow linking of studs IST-8MM-1S TERMINAL CONNECTING STUD MODEL PART No. Q.TY SIZE Q.TY SIZE DIMENSIONS mm ( ) mm ( ) mm ( ) IST-8MM-1S A 4 4 (5/32) 1 8x22 (5/16x7/8) 49x49x62 (1.9x1.9x2.5) IST-8MM-1SPT C 4 4 (5/32) 1 8x22 (5/16x7/8) 49x49x62 (1.9x1.9x2.5) IST-8MM-2S E 4 4 (5/32) 2 8x22 (5/16x7/8) 49x49x62 (1.9x1.9x2.5)

83 BEP MARINE - ANL FUSEHOLDERS UF Providing high-capacity fusing, fast response and high interrupt ratings (ANL up to 3,000 Amps DC), these fuse holders are ideal for protecting today s demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits, for example as a main fuse to protect house circuits, protection for digital switching main feed circuits, or heavy duty loads. ANL fuses in the following sizes/ratings are suitable: Bussmann 35A 750A. 8 mm (5/16 ) hole for stud Littelfuse 35A-500A. 10 mm (3/8 ) hole for stud, fits all Pro Installer ANL fuseholders FEATURES: n Innovative through-panel mounting version (Patent Pending) offers the user easy visual inspection of fuse state, and fast/safe access to change fuse if blown n Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders saving installation time and space n Durable construction allows fuses to run at maximum load n Radiused ends improve large cable routing options (can fit back-toback lugs at any angle -90º to +90º) n Innovative clear covers provide insulation/protection, with snap outs for extra cable access as required n Fuse viewing window in cover aids visual inspection of fuse-state n Label recess on cover allows fitting up to ½ width (12.7mm) printed labels n Insert moulded studs offer superior mechanical strength n Designed for the harsh marine environment n All threads are metric SPECIFICATIONS: n Cable connection studs: Shared 8mm (5/16 ) n Fuse mounting studs: 8mm (5/16 ). Also allows 10mm (3/8 ) ANL fuses to be used n Fuse type: ANL / ANN n Swinging fuse style allows changing fuse without removing fastened nuts n Amperage: A n 50 VDC (or determined by fuse fitted) n High temperature, fibre reinforced plastic base provides strength and chemical resistance n Clear poly carbonate cover n Stainless steel studs, and nickel plated brass nuts for longevity in the marine environment 778ANL 778ANL2S 778ANLTP 81 DISTRIBUTION COMPONENTS CONNECTING STUD MODEL PART No. FUSE FUSE Q.TY SIZE AMPS DIMENSIONS STUDS mm ( ) mm ( ) 778ANL G Bussmann 8 mm 8 mm 2 studs 8x22 300A 98x49x54 (3.9x1.9x2.1) (5/16 ) - Prudenz (5/16 ) shared with (5/16x7/8) o Siba 10 mm fuse 778ANLTP R Bussmann 8 mm 8 mm x25 750A 98x49x36 (3.9x1.9x1.4) (5/16 ) - Prudenz (5/16 ) per cable (3/8x1) o Siba 10 mm 778ANL2S T Bussmann 8 mm 8 mm x29 750A 147x49x61 (5.8x1.9x2.4) (5/16 ) - Prudenz (5/16 ) per cable (3/8x1/8) o Siba 10 mm

84 UF BEP MARINE - CLASS T FUSEHOLDERS 82 DISTRIBUTION COMPONENTS Provide high-capacity fusing, with very fast response and very high interrupt ratings (Class-T 20,000-50,000 Amps interrupt). These fuse holders are ideal for protecting today s demanding on board power electronics technology including inverters and battery chargers. They also protect wiring from short circuits, for example as a main fuse to protect house circuits, where modern battery technologies such as Lithium Ion and AGM, are capable of producing very high short circuit currents. FEATURES: n Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders, saving installation time and space n Durable construction allows fuses to run at maximum load n Radiused ends improve large cable routing options (can fit back-toback lugs at any angle -90º to +90º) n Innovative clear covers provide insulation/protection, with snap outs for extra cable access as required n Label recess on cover allows fitting up to ½ width (12.7mm) printed labels n Insert molded studs offer superior mechanical strength n Designed for the harsh marine environment SPECIFICATIONS: n Cable connection studs: 10mm (3/8 ) studs n Fuse mounting studs: 10mm (3/8 ) n Fuse type: Class T (JLLN / TJN / A3T) n Maximum amperage: 400A n 50 VDC n High temperature, fiber reinforced plastic base provides strength and chemical resistance n Clear poly carbonate cover n Tinned CDA102 copper conductors, stainless steel studs, and nickel plated brass nuts for longevity in the marine environment n All threads are metric CLASS T CONNECTING STUDS MODEL PART No. FUSE FUSE Q.TY SIZE AMPS DIMENSIONS STUDS mm ( ) mm ( ) 778T2S V Class T 10 mm x29 225A - 147x49x61 (5.8x1.9x2.4) 225A-400A (3/8 ) for cables (3/8x1/8) 400A 778T2S Class T 12 mm x29 400A - 147x49x61 (5.8x1.9x2.4) 450A-600A (0.47 ) for cables (3/8x1/8) 600A

85 UF - HYLANDER THE SELF SUSTAINAB POWER UNIT HyLander is a hybrid power generator, capable of producing energy from alternative sources such as solar and wind. It supplies its output directly to the users or accumulates energy to use it at a later stage, in a quiet and environmental way. The power is the main characteristic of HyLander, as it is capable of delivering in a constant and silent way, up to 5 kva with a peak of 10 kw only using the energy stored in the battery. In case of need, it can add extra power from the built-in generator, which intervenes to handle high power consumption, giving continuous autonomy to the system even in the absence of sun and wind. UF 83 FEATURES n Power supply 230Vac - 50HZ or 115Vac - 60Hz n Use of environmental compatible renewable energy n Continuous output power with genset off: 5 kva n Continuous output power with genset on: 10 kva n Pre-assembled and factory tested, ready for use unit n Energy from sun and wind at your service 365 days a year n Built-in backing generator and 80 l fuel tank n Automatic Management of energy n Remotely monitored via internet n High capacity battery pack n Silent running n Easily transportable n Designed and assembled in Italy n All system components are CE marked Wind turbine PV plant min. 1kWp - max. 5kWp HYLANDER SELF SUSTAINAB POWER UNIT INPUT AC OUT Control Panel AC OUT 230V-50Hz 110V-60Hz CC OUT 48V ON REQUEST 12V or 24 V

86 UF 84 SELF SUSTAINAB POWER UNIT UF - HYLANDER THE SELF SUSTAINAB POWER UNIT APPLICATIONS n Shelters, pastures n Remote cottages, cabins n Elettrification of rural areas n Missions n Pumping water n Civil protection n Schools and hospitals in not grid-connected areas n Telecomunications n Measumerent stations n Natural reserves n Not grid-connected small islands n Forest ranger Stations n Public events n...and everywhere you need energy, in a quiet, clean and inexpensive way! ACCESSORIES Wind generator 160W to 1000W Shelter support photovoltaic modules MODEL Picture purely indicative Converters DC/DC for direct use 12V or 24 V Submersible pumps HYLANDER Part No J Output voltage AC 230V-50Hz / 110V-60Hz Output voltage DC 48V (12V and 24V optional) Cont. output power 25 C 5000 VA Peak power (5 sec.) W Genset cont. output power 5000 VA PV modules power From 1 kwp to 5 kwp according to working area Battery pack capacity 19,2 kwh DOD Programmable from 30% to 70% (factory set 50%) Usable battery capacity (50% DOD) 9600 kwh without sun, wind or genset Data monitoring LCD Display: voltage, current, power, state of charge, run time, load cycle, energy flow Remote monitoring Included, via internte connection Dimensions mm ( ) 1950 x 1020 x 1450 (76.8 x 40.2 x 57.1) Weight kg (lbs) approx (2645.5)

87 UF - HYLANDER HD THE SELF SUSTAINAB POWER UNIT FOR HOT DUTY ENVIRONMENT HyLander HD is a hybrid power generator, designed to operate in hot environment, capable of producing energy from alternative sources such as solar and wind. It supplies its output directly to the users or accumulates energy to use it at a later stage, in a quiet and environmental way. UF The power is the main characteristic of HyLander HD, as it is capable of delivering in a constant and silent way, up to 10 kva with a peak of 20 kw only using the energy stored in the battery. In case of need, it can add extra power from the built-in generator, which intervenes to handle high power consumption, giving continuous autonomy to the system even in the absence of sun and wind. The output power from the generator can added directly to the inverter power - power boost function - providing a continuous output power of 18 kva. HyLander HD is the optimal solution also as UPS/backup energy generator for unstable grid area. FEATURES n Power supply 230Vac - 50HZ or 115Vac - 60Hz n Use of environmental compatible renewable energy n Continuous output power with genset off: 8 kva n Continuous output power with genset on: 18 kva n Pre-assembled and factory tested, ready for use unit n Energy from sun and wind at your service 365 days a year n Built-in, professional backing generator and 80 l fuel tank n Developed for hot environment n Automatic Management of energy n Remotely monitored via internet n High capacity battery pack n Silent running n Easily transportable n Designed and assembled in Italy n All system components are CE marked MODEL HYLANDER HD HYLANDER HD 85 SELF SUSTAINAB POWER UNIT Part No T Output voltage AC 230V-50Hz / 110V-60Hz Output voltage DC 48V (12V and 24V optional) Cont. output power 25 C VA Peak power (5 sec.) W Genset cont. output power 8000 VA PV modules power From 1 kwp to 5 kwp according to working area Battery pack capacity 23 kwh DOD Programmable from 30% to 80% (factory set 50%) Usable battery capacity (60% DOD) 13,8 kwh without sun, wind or genset Data monitoring LCD Display: voltage, current, power, state of charge, run time, load cycle, energy flow Remote monitoring Included, via internte connection Dimensions mm ( ) 1950 x 1130 x 1550 (76.8 x 44.5 x 61) Weight kg (lbs) approx (3527.4)

88 UF UF - HYLANDER HD THE SELF SUSTAINAB POWER UNIT FOR HOT DUTY ENVIRONMENT APPLICATIONS 86 SELF SUSTAINAB POWER UNIT n Civil protection n Schools and hospitals in not grid-connected areas n Telecomunications n Measumerent stations n Natural reserves n Pumping water irrigation n Not grid-connected small islands n Rural mini-grids n Public events n Military and emergency relief applications n Mining n Generators rental n Appartment buildings n Construction sites n Prefabricated buildings and mobile camps n Agricultural applications n Development building areas and compound n...and everywhere you need energy, in a quiet, clean and inexpensive way! ACCESSORIES Wind generators Multi-crystalline solar panels Pictures purely indicative Portable light towers LiFe PO4 peak power pack HyLander trailer DC-DC converter Console PV mounting system Submersible solar pump Semi-flexible solar panels Solar direct inverter pumps OPzS 2V tropicalized cell for solar storage Mounting structures

89 WFM - PETROL GENERATORS 3000 RPM WITH AVR Generating sets with HONDA petrol engine available also with NG or LPG version mounted in supersilenced canopy, air cooled, electric starting by key (starting battery included), electric panel with sockets and protection as standard. Equipped by suitable grids for cooling air circulation, they can work in combination with automatic panel control box in order to overcome the black out event. UF All the models are in compliance to the 2000/14/CE rules dated 01/01/2006 on noise level. n Sound shield for high noisy reduction n Original Honda engine compliant to the low CO2 emission rules n Low oil level protection n Silenced muffler n First quality Italian brand alternator n Electric starter with 12 V battery included (supplied dried) n Full load test by released testing certificate n User manual in conformity to the safety normative n Available with LPG or NG kit n Automatic Voltage Regulator (AVR) included for output stability <1% 4200-SHE AVR 7000-SHE AVR SE MHE AVR SE MTHE AVR MODEL 4200-SHE AVR 7000-SHE AVR MHE AVR MTHE AVR Part No L N R T GENERAL SPECIFICATIONS Continuous power single phase 4,5 kva / 3,6 kw 7,0 kva / 5,6 kw 12,0 kva / 9,6 kw 4 kva / 3,2 kw Continuous power threephase ,0 kva / 9,6 kw Max output current 20 A 30 A 52 A 18 A Output voltage 230 Vac ± 1% 230 Vac ± 1% 230 Vac ± 1% 230 Vac ± 1% Frequency 50 Hz 50 Hz 50 Hz 50 Hz RPM range 3000 rpm 3000 rpm 3000 rpm 3000 rpm Sound shield metallic metallic metallic metallic Noise level 63 dba (7m) 63 dba (7m) 67 dba (7m) 67 dba (7m) Dimensions mm ( ) 940 x 510 x x 540 x x 560 x x 560 x 920 (37 x 20.1 x 21.6) (43.3 x 21.3 x 25.6) (42.1 x 22 x 36.2) (42.1 x 22 x 36.2) Weight kg (lbs) 106 (233.7) 140 (308.6) 210 (463) 210 (463) PETROL ENGINE SPECIFICATIONS Engine model Honda G270 OHV Honda G390 OHV Honda G690 R Honda G690 R Number of cylinders Cylinder capacity Engine cooling air air air air Fuel consumption 2,4 l/h 3,1 l/h 4,6 l/h 4,6 l/h (full load) Tank capacity 7 litres 15 litres 20 litres 20 litres 87 LAND-BASED GENERATORS

90 UF WFM - DIESEL GENERATORS 3000 RPM WITH AVR Generating sets with Lombardini diesel engine, mounted on strong frame with metallic insulated canopy, electric starter with battery included, electric panel with socket as standard. Really compacts units with low weight and price, represent the perfect solution for both professional and residential use, even in case of grid-failure. All the models are in compliance to the 2000/14/CE rules dated 01/01/2006 on noise emissions. 88 LAND-BASED GENERATORS n Protective super silenced canopy n Original Lombardini diesel engine n Low oil level protection n Silenced muffler n First quality Italian brand alternator n Electric starter with 12 V battery (supplied dried) n Full load tested at the end of production with testing certificate n 20 lt fuel tank for a large autonomy n User manual in conformity to the safety normative n Automatic Voltage Regulator (AVR) included for output stability <1% SE DSE AVR SE TDSE AVR SP7500-DSE AVR Opening door for easy maintenance MODELLO SP5000-DSE AVR SP7500-DSE AVR SE12000-DSE AVR SE12000-TDSE AVR Codice Part No V Z H INFORMAZIONI GENERAL SPECIFICATIONS GENERALI Potenza Continuous continuativa power single monofase phase 4,6 kva / 3,7 kw 6,4 kva / 5,1 kw 12,0 kva / 9,6 kw 4 kva / 3,2 kw Potenza Continuous continuativa power threephase trifase ,0 kva / 9,6 kw Max corrente output current in uscita 20 A 27 A 52 A 18 A Tensione Output voltage in uscita 230 Vac ± 1% 230 Vac ± 1% 230 Vac ± 1% 230 Vac ± 1% Frequenza Frequency 50 Hz 50 Hz 50 Hz 50 Hz Velocità RPM range rotazione 3000 rpm 3000 rpm 3000 rpm 3000 rpm Cabina Sound shield di insonorizzazione metallica metallica metallica metallica Livello Noise level rumorosità 71 dba (7m) 71 dba (7m) 69 dba (7m) 69 dba (7m) Dimensioni Dimensions mm ( ) 750 x 560 x x 560 x x 560 x x 560 x 920 (29.5 x 22 x 24.4) (43.3 (29.5 x x x x 24.4) 25.6) (42.1 x 22 x 36.2) (42.1 x 22 x 36.2) Peso Weight kg kg (lbs) (lbs) 140 (308.6) 160 (352.7) 270 (595.2) 270 (595.2) SPECIFICHE DIESEL ENGINE MOTORE SPECIFICATIONS DIESEL Modello Engine model motore Lombardini 15LD350 Lombardini 15LD440 Lombardini 12LD477 Lombardini 12LD477 Numero Number cilindri of cylinders Cilindrata Cylinder capacity Raffreddamento Engine cooling motore ad air aria ad air aria ad air aria ad air aria Consumo Fuel consumption carburante (a (full pieno load) carico) 1,5 l/h 2 l/h 4,4 l/h 4,4 l/h Capacità Tank capacity serbatoio 20 litres litri 20 litres litri 20 litres litri 20 litres litri

91 WFM - PROFESSIONAL DIESEL GENERATORS 1500 RPM MASTER SERIES 1500 RPM - WATER COOD Generating sets equiped with Lombardini or Perkins diesel engine mounted on strong frame with metallic insulated canopy with retention basin for engine liquids. Threephase/singlephase, 1500 RPM, key starting battery included, electric panel on board equipped with service sockets and protections Designed for professional service where is required an heavy duty use. The M230-LDEW model includes the AREP system, able to provide 3 times the nominal power as surge power. All the models are in compliance to the 2000/14/CE rules dated 01/01/2006 on noise emissions. n Protective super silenced canopy n Original diesel engine 1500 RPM Lombardini or Perkins n Low oil pressure protection n Silenced muffler n First quality Italian brand alternator n 46 lt fuel tank for long autonomy n Retention basin for engine liquids n Electric starter with 12 V battery n Full load tested with testing certificate released n User manual in conformity to the safety normative n All genset can be provided with AUTOSTART control box. Please ask about it when ordering. Logic card SPG 120 MCCB Fuses Starting key Emergency push button Threephase CEE 5P socket 32 A Singlephase CEE 3P socket 32 A Acoustica alarm switch off Reading button Warning lights MODEL M165-LDEW M230-LDEW Part No K M GENERAL SPECIFICATIONS Continuous power single phase 5,5 kva / 4,4 kw 7,6 kva / 6,1 kw Continuous power threephase 16,5 kva / 13,2 kw 23 kva / 18,4 kw Max output current 23 A 33 A Output voltage 230 Vac 230 Vac ± 1% Frequency 50 Hz 50 Hz RPM range 1500 rpm 1500 rpm Sound shield metallic metallic Noise lever 69 dba (7m) 68 dba (7m) Dimensions mm ( ) 1480 x 680 x 1140 (58.3 x 26.8 x 44.9) 1480 x 680 x 1140 (58.3 x 26.8 x 44.9) Weight kg (lbs) 480 (1058.2) 570 (1256.6) DIESEL ENGINE SPECIFICATIONS Engine model Lombardini LDW1603 Perkins 404D Number of cylinders 3 4 Cylinder capacity Engine cooling water water Fuel consumption (full load) 5,3 l/h 6,2 l/h Tank capacity 46 litres 46 litres UF 89 LAND-BASED GENERATORS

92 UF SUPERCAPACITOR ENERGY STORAGE SYSTEMS 90 Supercap cell operating temperature range -30ºC to 85ºC No capacity degradation or cycle life reduction at 100% DOD +99% Supercap cell DC-to-DC roundtrip efficiency Medium and long duration discharge capability SUPERCAPACITORS Charge/discharge at 1C with no effect on cycle life or capacity ATTRIBUTE Projected cycle life DC round trip efficiency Depth-of-Discharge (DOD) LITHIUM-ION % 80% Safe with no risk of thermal runaway SIRIUS ADVANTAGE OVER CHEMICAL BATTERIES AD ACID % 50%-60% FLOW %-75% 100% Supercap cell projected cycle life 1 million life cycles SIRIUS 1 milione 99,1% 100% 10-year warranty SIRIUS ADVANTAGE Lowest opex in the industry Lowest opex in the industry Name-plate capacity is useable Temperature effect Charge current limitation Discharge current limitation Thermal stability <50 C Sev. limited 2 hours High risk <27 C Sev. limited hours Minimal <50 C Sev. limited 2-10 hours Minimal <85 C 1C 1C No risk Energy density High Medium Low 70 WH/KG Useable in almost any location Enables fast charging. Very efficient & effective in EV, solar, backup, and other applications Single solution for short, medium, and long duration discharging making it the most versatile storage in the industry Reduces costs by eliminating the need for auxiliary cooling systems Effective form factor ILLUSTRATIVE USE CASES SOLAR + STORAGE Plug-and-play replacement of Lead Acid or Li Ion batteries Compatible with existing inverters Safe with no risk of thermal runaway Operating temperature range eliminates need for auxiliary cooling infrastrucure High delivered efficiency results in low opex so faster payback Long cycle life with 10 year warranty DEMAND CHARGE REDUCTION, TIME-OF-USE SHIFTING Fast charge capability (45 minutes) enables optimized capacity sizing and increase response capability Operating temperature range minimizes (and even eliminates) auxiliary cooling cost High DC to DC efficiency delivers lowest opex High cycle life + high efficiency + low auxiliary opex = lowest cost of ownership and shortest payback Works with most inverters CELL TOWER Compatible with existing rectifier or DC electronics infrastructure Operating temperature range minimizes (and even eliminates) auxiliary cooling infrastructure (and therefore cost) High cycle life + high efficiency + low auxiliary opex = lowest cost of ownership and shortest payback At off-grid locations, reduces generator maintenance costs and increases generator efficiency which lowers diesel Consumption Plug-and-play replacement for Lead Acid or Li Ion batteries High rate of charge capability requires less storage thus saving opex

93 SUPERCAPACITOR ENERGY STORAGE SYSTEMS UF Sirius, the Kilowatt Labs supercapacitor storage system, is the first solution available on the market that delivers deep cycle discharge, long duration discharge as well as fast charge / short discharge, along with all the inherent advantages supercapacitors have over conventional chemical batteries. It can replace immediately any present solution based on lead (AGM, GEL, flooded acid) or Lithium-Ion (any type) ADVANTAGES 91 n High efficient storage system, (99%) no heat dissipation. No need cooling or ventilation n Operating Temperature -30 C to 85 C without degradation n DOD 100% - Nominal capacity delivered independently from the current rate nor the ambient temperature n Lifespan of 1 million DOD 100% n Available in 12V and 48V n Can be used with standard AGM lead battery charger n Active BMS included n No needs of any special shipping care for dangerous goods, like Lithium does n CE Certifications: 2006/95/EC Low Voltage Directive; 2004/108/EC Electromagnetic Compatibility Directive; Safety Standards EN Norms: EN :2009, EN :2007, EN55022:2006+A1:2007, EN :2006+A2:2009, EN :2008, EN55024:1998+A2:2003, EN :2007, EN :2005, EN , IEC :2005 SUPERCAPACITORS MODEL SIRIUS 1,0-12 SIRIUS 3,55-48 SIRIUS 7,1-48 Part No V U Total energy 1,0 kwh 3,55 kwh 7,1 kwh Usable energy 1,0 kwh 3,55 kwh 7,1 kwh 0,2C C 83,3 Ah 74 Ah 148 Ah Nominal voltage 12 VDC 48 VDC 48 VDC Voltage range 11-13,5 VDC VDC VDC Terminals F12 F12 F12 Container material Aluminum Aluminum Aluminum Life - cycles 1 million 1 million 1 million Life - years Communications - TCP/IP RJ45 Ethernet TCP/IP RJ45 Ethernet Dimimensions mm 1419 x 78 x x 534 x x 490 x 330 ( ) W x D x H (55.9 x 3.1 x 4.6) (23.6 x 21 x 7.9) (23.6 x 19.3 x 13) Weight kg (lbs) 19 (41.9) 75 (165.3) 127 (280)

94 UF BATTERY BO BYD Battery Box takes along BYD reliable Fe battery which can be used as energy storage unit in energy storage system. The modular design gives exibility of 1/2/3/4 pcs of battery modules (2,5 kwh each) in one battery rack. 92 BATTERIES The B-Box offers different storage capacities, depending on the user s needs. The capacity can be increased through the parallel connection of the B-Boxes up to 80 kwh. The system supports the RS485/CAN communication protocol. BYD standard 3U battery U3A1-50E-A which is CE and TUV certified FEATURES n Stable discharge plant n Excellent safety performance n Long Life Cycle n High temperature performance n High energy density n High charge & discharge rate n High energy transfer ef ciency n No pollution TECHNICAL SPECIFICATIONS Model B-Box Pro 2.5 B-Box Pro 5.0 B-Box Pro 7.5 B-Box Pro 10.0 B-Box Pro 13.8 Part No. Battey type Battery module Usable energy* Max output power Peak output power Efficiency Nominal voltage Operating voltage range Communication M P F U 1 module B-Plus 2.5 (2.56 kwh) LiFePO Y Dimensions mm ( ) WxHxD 600x883x510 (23.6x34.8x20.1) 650x800x550 (25.6x31.5x21.6) Net weight kg (lbs) 79 (174.2) 113 (249.1) 147 (324.1) 181 (399) 175 (385.8) Enclosure protection rating Warranty Ambient temp. range *Test condition: 100% DOD, 0.5C charge & +25 C 2 modules 3 modules 4 modules 2.56 kwh 5.12 kwh 7.68 kwh kwh 2.56 kw 5.12 kw 7.68 kw kw 5.12 kw, 30s kw, 30s kw, 30s kw, 30s 95.3% (under test condition*) V V CAN / RS485 IP20 10 years C B-plus 13.8 (13.8 kwh) 13.8 kwh 12.8 kw 13.3 kw, 60s Certifications TUV / CE / UN38.3 CE / RCM / UN38.3 Scalability Max 8 B-Box Pro 10.0 systems in parallel Max 32 systems in parallel Note: wall mount kit available (only for B-Box Pro 2.5)

95 VICTRON ENERGY - AGM SUPER CYC BATTERIES The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Exceptional 100% depth of discharge (DoD) performance Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles. The tests consist of a daily discharge to 10,8V with I = 0,2C 20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C 20. The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery. We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60-80% DoD is expected An additional advantage of the new chemistry is a slightly smaller size and less weight compared to our standard deep cycle AGM batteries. The internal resistance is also slightly lower compared to our standard deep cycle AGM batteries. UF 93 BATTERIES Cycle life % DoD (discharge to 10,8V with I = 0,2C 20, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C 20 ) % DoD (discharge during three hours with I = 0,2C 20, immediately followed by recharge at I = 0,2C 20 ) % DoD (discharge during two hours with I =0,2C 20, immediately followed by recharge at I = 0,2C 20 ) SUPER CYC AGM PART No. NOMINAL VOLTAGE Ah C 5 Ah C 10 Ah C 20 TERMINALS DIMENSIONS mm ( ) WxDxH WEIGHT kg (lbs) 12V/12,5Ah J 12 V 10 11,5 12,5 M5 insert 151x100x103 (5.9x3.9x4.1) 4 (8.8) 12V/25Ah U 12 V M5 insert 181x77x175 (7.1x3x6.9) 7 (15.4) 12V/38Ah W 12 V M5 insert 267x77x175 (10.5x3x6.9) 10 (22) 12V/60Ah Y 12 V M5 insert 224x135x178 (8.8x5.3x7) 15 (33.1) 12V/100Ah R 12 V M6 insert 260x168x215 (10.2x6.6x8.5) 25 (55.1) 12V/125Ah A 12 V M8 insert 330x171x214 (13x6.7x8.4) 34 (75) 12V/170Ah T 12 V M8 insert 336x172x280 (13.2x6.8x11) 45 (99.2) 12V/230Ah V 12 V M8 insert 532x207x218 (20.9x8.1x8.6) 61 (134.5)

96 UF VICTRON ENERGY - BATTERIES 94 AGM BATTERIE Deep cycle AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel batteries. Life: 7 10 years GEL AGM Type PART No. CAPACITY* DIMENSIONS WEIGHT W x D x H mm ( ) kg (lbs) 12/ C Ah 229x138x227 (9x5.4x8.9) 18 (39.7) 12/ E Ah 258x166x235 (10.1x6.5x9.2) 24 (52.9) 12/ G Ah 350x167x183 (13.8x6.6x7.2) 27 (59.5) 12/ S Ah 330x171x220 (13x6.7x8.7) 32 (70.5) 12/ J Ah 410x176x227 (16.1x6.9x8.9) 38 (83.7) 12/ L Ah 485x172x240 (19.1x6.7x9.4) 47 (103.6) 12/ N Ah 522x238x240 (20.5x9.3x9.4) 65 (143.0) *value for 20 hours of discharging GEL deep cycle batteries. Life: 12 years GEL Type PART No. CAPACITY* DIMENSIONS WEIGHT W x D x H mm ( ) kg (lbs) 12/ R Ah 229x138x227 (9x5.4x8.9) 19 (41.9) 12/ T Ah 258x166x235 (10.1x6.5x9.2) 24 (52.9) 12/ B Ah 350x167x183 (13.8x6.6x7.2) 26 (57.3) 12/ U Ah 330x171x220 (13x6.7x8.7) 33 (72.7) 12/ D Ah 410x176x227 (16.1x6.9x8.9) 38 (83.7) 12/ F Ah 485x172x240 (19.1x6.7x9.4) 48 (103.6) 12/ H Ah 522x238x240 (20.5x9.3x9.4) 66 (143.0) *value for 20 hours of discharging GEL long life 2Vcc batteries with lead calcium grids. Life: 20 years. GEL 2 V DC Type PART No. CAPACITY* DIMENSIONS WEIGHT W x D x H mm ( ) kg (lbs) 2/ K 800 Ah 215x193x710 (8.5x7.6x27.9) 68 (150) 2/ M 1000 Ah 215x235x710 (8.5x9.2x27.9) 82 (181) 2/ P 1500 Ah 215x277x855 (8.5x10.9x33.6) 120 (264) 2/ S 2000 Ah 215x400x815 (8.5x15.7x32.1) 160 (352) 2/ U 3000 Ah 215x580x815 (8.5x22.8x32.1) 240 (529) *value for 10 hours of discharging

97 VICTRON ENERGY Lithium-ION batteries 12,8 Volt Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage cell is 3,2V (lead-acid: 2V/cell). A 12,8V Li-ion battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series. n Efficient. In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round trip energy efficiency of a Li-ion battery is 92% n Weight reduction of the battery pack (with equal energy used) up to 70% referred to lead type. n Lithium-ion batteries are more expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency UF 95 BATTERIES LFP MODEL LFP-SMART 12,8/60 LFP-SMART 12,8/100-a LFP-SMART 12,8/150 LFP-SMART 12,8/200 LFP-SMART 12,8/300 Part No P C E W G Nominal voltage 12,8 V 12,8 V 12,8 V 12,8 V 12,8 V Nominal C 60 Ah 100 Ah 150 Ah 200 Ah 300 Ah Nominal C 48 Ah 80 Ah 125 Ah 160 Ah 240 Ah Nominal C 30 Ah 50 Ah 75 Ah 100 Ah 150 Ah Nominal C 768 Wh 1280 Wh 1920 Wh 2560 Wh 3840 Wh Maximum continuous discharge current Recommended continuous discharge current 120 A 200 A 300 A 400 A 600 A 60 A 100 A 150 A 200 A 300 A Maximum charge current 120 A 200 A 300 A 400 A 600 A Recommended charge current 30 A 50 A 75 A 100 A 150 A Power connection (threaded inserts) Dimensions mm ( ) HxWxD M8 M8 M10 M10 M10 240x285x132 (9.5x11.2x5.2) 197x321x152 (7.8x12.6x6) 237x321x152 (9.3x12.6x6) 297x425x274 (11.7x16.7x10.8) 347x425x274 (13.7x16.7x10.8) Weight kg (lbs) 12 (26.5) 15 (33.1) 20 (44.1) 42 (92.6) 51 (112.4) CABS WITH M8 CIRCULAR CONNECTOR FOR Li-ion BATTERIES: Male to female 3 pole 1 m (3.3 ft) G Male to female 3 pole 2 m (6.6 ft) J Male to female 3 pole 3 m (9.8 ft) L Male to female 3 pole 5 m (16.4 ft) N

98 UF VICTRON ENERGY BMS 12/200 FOR LITHIUM BATTERIES 96 BMS 12/ C BATTERY MANAGEMENT SYSTEM A 12V BMS that protects the alternator (and wiring), and supplies up to 200A in any DC load (including inverters and inverter/chargers) Why a Battery Management System (BMS) is needed: n A LFP cell will be damaged if the voltage over the cell falls to less than 2,5V. n A LFP cell will be damaged if the voltage over the cell increases to more than 4,2V. n The cells of a LFP battery do not auto-balance at the end of the charge cycle. Alternator/battery charger input (Power Port AB) - Features n The first function of Power Port AB is to prevent the load connected to the LFP battery from discharging the starter battery. n Control of transients and input voltage. n Charge current is reduced to a safe level in case of cell unbalance or over temperature. n The input current is electronically limited to approximately 80% of the AB fuse rating. Choosing the right fuse is very important. Load/battery charger output/input (Power Port LB) - Features n Maximum current in both directions: 200A continuous. n Peak discharge current electronically limited to 400A. n Battery discharge cut-off whenever the weakest cell falls below 3V. n Charge current is reduced to a safe level in case of cell unbalance or over temperature. VICTRON ENERGY - VE.BUS BMS Protects each individual cell of a Victron lithium iron phosphate (LiFePO4 or LFP) battery The BMS will: n shut down or disconnect loads in case of imminent cell under voltage, n reduce charge current in case of imminent cell overvoltage or over temperature (VE.Bus products only), n shut down or disconnect battery chargers in case of imminent cell overvoltage or over temperature.. VE.BUS BMS Protects 12 V, 24 V and 48 V systems Operating voltage range of the BMS: 9 to 70 V DC. Communicates with all VE.Bus products The VE.Bus BMS connects to a MultiPlus, Quattro or Phoenix inverter with a standard RJ45 UTP cable. n Protection grade: IP20 n Standards: EN60950; EN ; EN ; EN ; EN ; EN and EN MODEL Part No. Input Voltage Range Current Draw, Normal Operation Current Draw, Low Cell Voltage Operating Temperature VE.BUS BMS E 9-70 Vdc 10 Ma 2 Ma -20 A +50 c Weight kg (lbs) 0,1 (0.22) Dimensions ( ) 105x78x32 (4.1x3.1x1.3)

99 VICTRON ENERGY PEAK POWER PACK UF The Peak Power Pack is a complete substitute for heavy lead acid batteries in applications where high currents occur for short time. Being primarily meant for caravan movers, it is equipped with a built in charger allowing charging from the car electrical system during the travel with the caravan. This way the pack will be fully charged upon arrival to the camping site. If necessary, the charging is possible using the supplied adapter via a grid outlet. Charging from a solar panel is also possible. PPP-8 97 BATTERIES PPP-20 The Peak Power Pack can be charged from your car, and likewise via a solar panel or from the mains connection on your campsite. If you charge the battery whilst driving, the battery will be fully charged for manoeuvring your caravan when you arrive. Thanks to the cable supplied, the Peak Power Pack is extremely easy to use. A push button operates a built-in D light with different colours which indicates the status of the battery. PPP-30 PPP-40

100 UF VICTRON ENERGY PEAK POWER PACK 98 CONNECTIONS n 200 A mover connection n 30 A on-board connection n 7 A universal charger input n Connection for 3 A universal adapter n Connection for the operating cable n VE.Direct connection, e.g. for the Bluetooth dongle BATTERIES Peak Power Pack PPP-8 PPP-20 PPP-30 PPP-40 Part No G J L N Capacity 8 Ah 20 Ah 30 Ah 40 Ah Stored energy 102 Wh 256 Wh 384 Wh 512 Wh Battery type Lithium-ion (LiFePO4) Nominal voltage 12,8 V Battery drain in storage mode < 6,5 Ah / year (< 0,7 ma) OUTPUT 1: HIGH CURRENT OUTPUT Continuous output current 150 A Max. output current (10 s) 200 A Protections Overload / short circuit / over temperature / over discharge Max. input (charge) current 40 A (not protected) Max. input (charge) voltage 14,4 V (not protected) Max. cable cross section 16mm 2 (screw terminals) OUTPUT 2: AUILIARY OUTPUT Continuous output current 30 A Max. output current (10 s) 50 A Protections Overload / short circuit / over temperature / over discharge Max. input (charge) current 10 A (not protected) Max. input (charge) voltage 14,4 V (not protected) Max. cable cross section 6mm 2 (screw terminals) Dimensions mm ( ) 120 x 170 x x 170 x x 170 x x 170 x 170 (4.7 x 6.7 x 6.7) (4.7 x 6.7 x 6.7) (6.3 x 6.7 x 6.7) (7.9 x 6.7 x 6.7) Weight kg (lbs) 2,3 (5.1) 3,6 (7.9) 5,5 (12.1) 7,4 (16.3)

101 LUMINOR - AGM DEEP CYC BATTERIES UF n Robust ABS box shock and vibration resistant n High performance terminals with superior conducivity n Low internal resistance; low self-discharge n Longer shelf life than traditional batteries n Up to 22 Ah - 6 years of trickle charge (25 ) n From 24 Ah - 10 years of trickle charge (25 ) n Do not discharge over 80%, deep discharges damage the batteries 99 BATTERIES 6 VOLT - DEEP-CYC AGM BATTERIES MODEL PART No VOLT AH/20HR TERMINALS DIMENSIONS mm ( ) WEIGHT kg (lbs) LDC G T x 228 x 234 (7 x 9 x 9.2) 35 (77.2) LDC R T x 275 x 275 (7.4 x 10.8 x 10.8) 32 (70.5) LDC T T x 247 x 270 (7.1 x 9.7 x 10.6) LDC RA DT 295 x 180 x 346 (11.6 x 7.1 x 13.6) LDC S DT 295 x 180 x 406 (11.6 x 7.1 x 16) 30 (66.1) 47,5 (103.9) 53 (116.8) 12 VOLT - DEEP-CYC AGM BATTERIES MODEL PART No VOLT AH/20HR TERMINALS DIMENSIONS mm ( ) WEIGHT kg (lbs) LDC V 12 9 T2 151 x 65 x 95 (5.9 x 2.6 x 3.7) 2,55 (5.6) LDC T x 76 x 167 (7.2 x 3 x 6.5) 6,3 (13.9) LDC Z T7 230 x 138 x 209 (9.1 x 5.4 x 8.2) 17 (37.5) LDC B T7 350 x 166 x 176 (13.8 x 6.5 x 6.9) 22,7 (50) LDC D T7 258 x 168 x 208 (10.1 x 6.6 x 8.2) LDC F T x 168 x 208 (12 x 6.6 x 8.2) LDC K T x 172 x 240 (19.1 x 6.8 x 9.4) LDC U T x 209 x 214 (20.9 x 8.3 x 8.4) LDC W M8 520 x 268 x 220 (20.5 x 10.5 x 8.7) 26 (57.3) 30 (66.1) 46 (101.4) 60 (132.3) 74 (163.1)

102 UF 100 BATTERIES ABT POWER BATTERIES GEL BATTERIES FOR SOLAR STORAGE The batteries Gel ABT Power Sol 1,thanks to its special construction technology with the latest generation plates and low antimony content, is particularly suitable for a storage system of the energy produced by a photovoltaic plant. The battery Sol to Gel 1 is suitable to be installed in environments with reduced ventilation and, thanks to the construction technology, ensures a low number of gaseous emissions. The battery Abt Power Gel with pure gel makes it very good for use in renewable energy where it is required a continuous and prolonged slow discharge. The range Abt Power gel batteries for photovoltaic energy storage has different and modular solutions as needed: n Sol 1 PZV Battery Gel Long Long Life 12 years waiting maintenance free life. This line of gel batteries is characterized by high reliability accumulator. The very thick plates and a grid with a new design allows the new formulation active material a larger surface for the energy transition. n Sol 1 PZS flooded lead-acid Battery with Long Life maintenance. n Accessories: Degassing filled kit: V (6 cells) (12 cells) B (24 cells) Tropicalization service - on demand GEL - PzV Dimensions mm ( ) PzV c/sol1/c/20 Capacity Ah c/5 H W L Weight kg (lbs) 4/ (3.3) 16,5 (36.4) 5/ (4) 20,2 (44.5) 6/ (4.7) 23,9 (52.7) 7/ (5.4) - 8/ (6.1) - 340/350 (13.4/13.8) 198 (7.8) 4/ (3.3) 19,9 (43.9) 5/ (4) 24,4 (53.8) 6/ (4.7) 28,9 (63.7) 7/ (5.4) - 8/ (6.1) - 408/435 (16.1/17.1) 198 (7.8) 4/ (3.3) 23,2 (51.1) 5/ (4) 28,3 (62.4) 6/ (4.7) 33,6 (74.1) 7/ (5.4) - 8/ (6.1) 44,1 (97.2) 478/505 (18.8/19.9) 198 (7.8) 4/ (3.3) 28,7 (63.3) 5/ (4) 35,3 (77.8) 6/ (4.7) 42,1 (92.8) 7/ (5.4) - 8/ (6.1) - 568/595 (22.7/23.4) 198 (7.8) Other models are available on demand. For more information, please contact our Technical Office.

103 ABT POWER BATTERIES UF OPEN CELL - PzS 101 Dimensions mm ( ) PzS c/sol1/c/20 Capacity Ah c/5 H W L Weight kg (lbs) 5/ (4) 23,2 (51.1) 6/ (4.7) 27,8 (61.3) 7/ (5.4) 32,4 (71.4) 7/ (5.4) 36,1 (79.6) 8/ (6.1) 41 (90.4) 9/ (6.8) 44,8 (98.8) 10/ (7.6) 49,6 (109.3) 405/435 (15.9/17.1) 475/505 (18.7/19.9) 198 (7.8) 198 (7.8) BATTERIES 8/ (6.1) 48 (105.8) 9/ (6.8) 53,6 (118.2) 10/ (7.6) 59,4 (130.9) Other models are available on demand. For more information, please contact our Technical Office. 545/575 (21.5/22.6) 198 (7.8) ENERPOWER - BATTERIES SLC SERIES - 12 V AGM TECHNOLOGY n Applications: SLC series batteries are suitable for use in solar power stations, control devices, alarm systems, emergency systems, emergency responders, telecommunications, UPS, operating rooms, video surveillance n Features: AGM technology. They work in a wide range of temperatures, they are sealed and require no maintenance. They have a great conduct to lens discharge n Life: 5 6 years 18 Ah, 10 years > 18 Ah. AGM MODEL SLC100-12A SLC140-12A Part No L U Nominal voltage 12 V 12 V Nominal capacity 20h 100 Ah 140 Ah Dimensions WxDxH mm ( ) 330x173x220 (13x6.8x8.7) 344x171x280 (13.5x6.7x11) Weight kg (lbs) 29 (63.9) 41,2 (90.8)

104 UF UF - BATTERY BO n The box is supplied on a pallet and pre-assembled to simplify the installation activity n The box can be opened on three sides through a special key 102 n It s provided with a drip system to be mounted if required n Three adjustable shelves n Stabilizing adjustable feet BATTERY BOES n Dimensions W x D x H: 850 x 435 x 1310 mm (33.5 x 17.1 x 51.6 ) BATTERY BO BATTERY BOES External box, to be placed on pole, suitable to contain a single battery (up to 100Ah) and electronic control. Complete with a plate for the attack on the pole and with door locks. Reinforced polyester box F Metallic painted box H Metallic painted box The PVC ground box, which can hold up to two 100Ah batteries, complete with cover and metal support to guarantee isolation. Reinforced polyester box PVC ground box K PVC ground box

105 PRIMUS - WIND GENERATORS AIR BREEZE/AIR MARINE WIND GENERATORS Quiet, reliable energy for sea and shore AirBreeze/Airx Marine is trusted by sailors around the world and recommended as the best high-energy output turbine by Yachting Monthly. Its optimized electronic controls deliver energy quietly and efficiently. Extensive third party testing and certification shows more consistent output than the competition. AirBreeze/Airx Marine is part of the latest generation of AIR products the world s best-selling wind turbines with more than 135,000 units sold in more than 120 countries. High performance in marine environments We recommend AirBreeze for all small battery-charging applications in coastal areas or offshore: boats, docks and other marine uses. The AirBreeze is an ideal wind turbine for hybrid systems with solar to offset those cloudy or stormy periods. AirBreeze is built and backed by the worldwide leader in small wind. n Improved reliability backed by a lifetime warranty n Quiet operation n Energy in light winds n Lightweight; unique design is simple and easy to install n Stop switch included n Corrosion resistant paint tested to SAE J2334 standard n Marine grade 0-ring seal n Stainless steel external fasteners n Anodized blade hub APPLICATIONS AIR MARINE AIR BREEZE Remote homes 4 Marine and sailboats 4 Recreational vehicles 4 Railroad 4 Telecommunications 4 Oil and gas 4 SCADA systems 4 Lighting systems 4 4 Cathodic protection 4 Coastal applications 4 UF 103 WIND GENERATORS AIR BREEZE Air Breeze M1 12V Air Breeze M2 24V Air Marine 12V Air Marine 24V Part No F H Z B Energy app Ah/month at 5,8 m/s (11.3 knots) 30kW h/m at 5,8 m/s (13 mph) Rotor Diameter 1.17 m (6 in) Weight 5.9 kg (13 lb) Shipping dimensions 686 x 318 x 229 mm (27 x 12.5 x 9 in) Mount 48 mm (1.9 in) outer diameter Startup Wind Speed 3.13 m/s (7 mph) 3.58 m/s (8 mph) Voltage 12 or 24 V DC Turbine Controller Microprocessor-based smart internal regulator Overspeed protection Electronic torque control Survival Wind Speed 49.2 m/s (110 mph)

106 UF 104 WIND GENERATORS PRIMUS - WIND GENERATORS AIR 30 AND AIR 40 WIND GENERATORS n Features: - These wind generators are controlled by a microprocessor and provide high-performance and electronic protection against strong winds without mechanical friction. - Its design and the carbon alloy blades ensure quiet operation, durability and high efficiency in several wind conditions. Their performances depends on wind speed, pole height and environment condition. - Generator body made of die cast aluminum alloy; brushless alternator with permanent magnets. - AIR 30 and AIR 40 are easy to install; with integrated electronic control, they are plug-and-play. - In hybrid systems with PV panels, they provide energy all year long. - Available on request 48V model APPLICATIONS AIR 30 AIR 40 Remote homes 4 Recreational vehicles 4 Railroad 4 Telecommunications 4 Oil and gas 4 SCADA systems 4 Lighting systems 4 Cathodic protection 4 Model AIR 30 AIR 40 Part No K (12 V) M (24 V) P (12 V) S (24 V) Energy at 5,8 m/s (13 mph) 30 kwh/month 40 kwh/month Voltage 12/24 V DC 12/24 V DC Start-up wind 3,58 m/s (8 mph) 3,1 m/s (7 mph) Wind speed operating range 3,6-22 m/s (8-49 mph) 3,1-22 m/s (7-49 mph) Optimum wind speed range m/s (25-32 mph) 4,5-22 m/s (10-49 mph) Survival wind speed 49,2 m/s (110 mph) 49,2 m/s (110 mph) Rotor diameter 1,17 m (46 in) 1,17 m (46 in) Swept area 1,07 m² (11,5 ft²) 1,07 m² (11,5 ft²) Pipe outer diameter 48 mm (1,9 in) 48 mm (1,9 in) Dimensions 686 x 318 x 229 mm 686 x 318 x 229 mm (27 x 12,5 x 9 in) (27 x 12,5 x 9 in) Weight 5,9 kg (13 lb) 5,9 kg (13 lb) Power Output (Watts) AIR 30/AIR Marine AIR 40/AIR Breeze Monthly Energy Output (kwh) AIR Power Curve Instantaneous Power* mph m/ s Wind Speed AIR Energy Curve Monthly Energy mph m/s AIR 30/AIR Marine AIR 40/AIR Breeze Average Wind Speed For high wind regimes, Air 30 is recommended

107 SINTWIND - WIND GENERATORS SINTIWIND 400 THREE BLADE GENERATORS n Features: - Generator type: permanent magnet generator, 3 phase - Integrated electronic/manual stop switch - Very light: 6,8 kg only - Hand laminated, UV-resistant carbon blades, successfully tested according to DIN EN at hurricane speed 122km/h. - Low noise - Very good start-up performance due to low cogging torque at 2,2 m/s wind speed - Supplied with external hybrid controller for wind and solar energy with multi-function LCD display (for 12V and 24V models). It can be connected to photovoltaic modules. n Applications: universal application for marine, land and professional systems with low, middle and high wind n Warranty: 3 years n Certification: DIN VDE protection class II; CE; RohS Model SLW SLW SLW Part No E G J Rated voltage 12 VDC 24 VDC 48 VDC Rated power 420 W 450 W 500 W Rated wind speed 14,5 m/s 14,5 m/s 14,5 m/s Start-up wind speed 2,2 m/s 2,2 m/s 2,2 m/s Start-up charging 2,8 m/s 2,8 m/s 2,8 m/s Rotor diameter 1,15 m 1,15 m 1,15 m Rotor speed range rpm rpm rpm UF 105 WIND GENERATORS Packing dimensions mm ( ) 780 x 400 x 210 (30.7 x 15.8 x 8.3) 780 x 400 x 210 (30.7 x 15.8 x 8.3) 780 x 400 x 210 (30.7 x 15.8 x 8.3) Dry weight kg (lbs) 6,8 (15) 6,8 (15) 6,8 (15) WIND/SOLAR HYBRID CHARGE CONTROLR The LCD multifunction display shows all main operating values (W, A, V/Ah, kwh, Ah). Battery system voltage automatically detected. Maximum power input of the solar panel: 550 Wp. Part No L (12 V) N (24 V) R (48 V) Rated battery voltage THREE BLADE SPARE KIT M - Three blade kit for AirBreeze and Air PO AND MOUNTING KIT E - Reinforced pole for high wind speed N - Mounting kit 12, 24 or 48 VDC Max wind gen. power input 600 W /40 A (12 V) /30 A (24 V) /15 A (48 V) Max solar mod. power input 300 W /50 VOC /20 A (12 V) /10 A (24 V) /5 A (48 V) Display data Battery type V, A, V/Ah, kwh, Ah Flooded / GEL / AGM Dimensions mm ( ) 220 x 150 x 82 (8.7 x 5.9 x 3.2) Dry weight kg (lbs) 2,8 (6.2)

108 UF SUPERWIND - WIND GENERATOR 106 WIND GENERATORS SINTIWIND 350 THREE BLADE GENERATOR The Superwind 350 is a small wind turbine for professional use, which even under extreme conditions works autonomously and automaticly. n Features: - Adjust the speed and power by varying the pitch of the blades - Carbon fiber reinforced blades - Alternator with permanent magnet, three-phase rectifier - Stop: Short circuit of the generator - Superwind 350 is often used in mixed wind / photovoltaic systems n Applications: Ideal fields of application for example are navigational aids, traffic control systems, environmental monitoring stations or transmitters, but also sailing yachts, campers, summer cottages and mountain shelters. SUPERWIND Superwind V Superwind V Part No S U Max power at 12,5 m/s ACCESSORIES CRM 12V Charge controller W CRM 24V Charge controller Y Stop switch G Installation Kit J 350 W 350 W Voltage 12 V DC 24 V DC Cut-in wind speed 3,5 m/s 3,5 m/s Cut-off wind speed none none Rotor diameter 1,20 m 1,20 m Rotor speed rpm rpm Rotor thrust (operation) Rotor thrust (extreme wind speed) 70 N 70 N 220 N 220 N Dry weight kg (lbs) 11,5 (25.3) 11,5 (25.3) Power output (W) Power Curve wind speed (m/s)

109 ADING EDGE - WIND TURBINES -v50 and -v150 WIND TURBINES n Features: - 3 phase brushless wind turbines. The cross-ventilated savonious vertical axis rotor coupled with the well proven axial flux alternator. UF - Quiet; reliable. - Robust design, almost indestructable: these vertical axis wind turbine are designed & proven to survive 120mph Antarctic winds. - Compact and lightweight, can be installed in a variety of positions with ease - Marine quality finish, high quality components and lasting performance - High efficiency due to anticipated start-up charge - Charge controller included (only -v150 model) n Applications: Trickle charging for batteries installed on boats and land. Polar stations for monitoring air pollution. Buoys and marine lights. Telecom systems. Signaling systems that require low energy. n Warranty: 2 years Model -v50 -v150 -v50 -v WIND GENERATORS Part No Z (12 V) U (12 V) B (24 V) W /24 V) Voltage 12 or 24 V 12 or 24 V Nominal power 11 8 m/s 24 8 m/s (15,5 knots) (17,8 knots) Peak power 70 W 200 W Cut-in wind speed 4 m/s (7,7 knots) 3 m/s (9 mph) Rotor diameter 200 mm (7.92) 270 mm (10.6 ) Dry weight kg (lbs) 9 (19.9) 13 (28.7) -v50 -v150

110 UF 108 HYE - WIND GENERATORS 5 BLADE WIND GENERATORS HY-400L; HY-600L n Features: - Equipped with electromagnetic control of the blade speed and with aerodynamic clutch of the blades. The blades are made of glass fiber reinforced - 3 phase brushless wind generator with permanent magnets. The wind generator body is made of aluminium alloy and rotor is stainless steel - Pole connection through a flange or a clamp and bolt - PWM electrical signal or low voltage charge function - Available hybrid solar-wind controller for HY-400L (12 VDC) and HY-600L (24 VDC) wind generators WIND GENERATORS n Applications: Stand-alone systems, solar-wind hybrid systems, etc n Warranty: 3 years n Certifications: ISO9001:2008; CE; RoHS; ETL Model HY-400L HY-600L Part No K D Nominal power 400 W 600 W Peak power 500 W 750 W Voltage 12/24 V DC 24/48 V DC Start-up wind speed 2 m/s (4.5 mph) 2 m/s (4.5 mph) Cut-in wind speed 2,5 m/s (5.6 mph) 2,5 m/s (5.6 mph) Nominal wind speed 12 m/s (26.8 mph) 12 m/s (26.8 mph) Max wind speed 50 m/s (110 mph) 50 m/s (110 mph) Nominal rotor speed 750 rpm 750 rpm Nominal charge current 33.3/16.7 A 25/12,5 A Noisiness <20 5 m/s <20 5 m/s Energy delivered (average month wind speed 5,5 m/s) 82 kwh/month 91 kwh/month Temperature compensation -40 C to +60 C -40 C to +60 C Rotor diameter 1,55 m (5.1 ) 1,75 m (5.7 ) Area swept 1,89 m² 2,4 m² Dry weight kg (lbs) 22 (48.5) 25 (55.1) HYBRID CHARGE CONTROLRS FOR HY-400L E HY-600L GENERATORS Model HY-WSC04-12AWM HY-WSC04-24AWM HY-WSC06-24AWM HY-WSC06-48AWM Part No M D F K Nominal energy 500 VA 500 VA 600 VA 600 VA Nominal power 500 W 1000 W 600 W 1000 W PV nominal power 150 W 300 W 150 W 300 W Voltage 12 VDC 24 VDC 24 VDC 48 VDC Dimensions mm ( ) 180 x 155 x 100 (7.1 x 6.1 x 3.9) 180 x 155 x 100 (7.1 x 6.1 x 3.9) 180 x 155 x 100 (7.1 x 6.1 x 3.9) 180 x 155 x 100 (7.1 x 6.1 x 3.9) Dry weight kg (lbs) 1,7 (3.8) 2 (4.4) 1,7 (3.8) 2 (4.4)

111 HYE - WIND GENERATORS 5 BLADE WIND GENERATORS HY-1000L; HY-3000L n Features: - Equipped with electromagnetic control of the blade speed and with aerodynamic clutch of the blades. The blades are made of glass fiber reinforced - 3 phase brushless wind generator with permanent magnets. The wind generator body is made of aluminium alloy and rotor is stainless steel - Pole connection through a flange or a clamp and bolt - PWM electric signal or low voltage charge function - Available hybrid solar-wind controller for HY-1000L (24-48 VDC) and HY-3000L (48 VDC) wind generators n Applications: Stand-alone systems, solar-wind hybrid systems, etc n Warranty: 3 years n Certifications: ISO9001:2008; CE; RoHS; ETL Model HY-1000L HY-3000L Part No K M Nominal power 1000 W 3000 W Peak power 1200 W 3500 W Voltage 24/48 V DC 48 V DC Start-up wind speed 2 m/s (4.5 mph) 2,5 m/s (5,6 mph) Cut-in wind speed 3,0 m/s (6,7 mph) 3,0 m/s (6,7 mph) Nominal wind speed 12 m/s (26.8 mph) 12 m/s (26.8 mph) Max wind speed 50 m/s (110 mph) 60 m/s (133 mph) Nominal rotor speed 750 rpm 700 rpm Nominal charge current <20 5 m/s <30 5 m/s Noisiness <20 5 m/s <20 5 m/s Energy delivered (average month wind speed 5,5 m/s) 175 kwh/month 495 kwh/month Temperature compensation -40 C to +60 C -40 C to +60 C Rotor diameter 1,96 m (6.4 ) 3,05 m (10.0 ) Area swept 3,0 m² 7,3 m² Dry weight kg (lbs) 28 (61.7) 70 (154.3) UF 109 WIND GENERATORS HYBRID CHARGE CONTROLR FOR HY-1000L AND HY-3000L GENERATORS Model HY-C10-24BLS HY-C10-48BLS HY-C30-48BLS Part No P M T Nominal power 1000 W 1000 W 3000 W PV nominal power 300 W 300 W 900 W Voltage 24 V DC 48 V DC 48 V DC Dimensions controller mm ( ) 90x470x220 (19.3x 8.5x8.7) 90x470x220 (19.3x 8.5x8.7) 480x370x220 (18.9x14.6x8.7) Dimensions dump loader mm ( ) x480x220 (22.8x18.9x8.7) Dry weight controller kg (lbs) 10 (22) 11 (24.2) 12 (26.5) Dry weight dump loader kg (lbs) (28.7)

112 UF FRANKLIN ECTRIC - SOLAR KITS The Fhoton TM SolarPAK is the system solution to your solar pumping requirements. 110 SOLAR KITS APPLICATIONS The Fhoton TM drive supports submersible and surface pumping applications. n Livestock watering n Tank/cistern filling n Wildlife refuge and game farms n Rural water supply for villages and homesteads n Irrigation systems n Fountains n Vineyards n Renewable energy projects n Effluent pumping BUILT-IN DIAGNOSTIC & PROTECTION The Fhoton TM SolarPAK includes diagnostic features and built-in protection from potential harmful conditions, including: n Reverse polarity n Surge n Underload n Undervoltage n Locked pump n Open circuit n Short circuit n Overheated controller n Dry run

113 FRANKLIN ECTRIC FHOTON TM SOLARPAK - SOLAR KITS SOLARPAK CONTENTS n Franklin Electric 4 submersible motor, 0,75/1,1 kw n Franklin Electric 4 submersible pump n Fhoton TM solar controller n Flow switch n Flow rates available: 17, 30, 67, 100, 117 lpm (1, 2, 4, 6, 7 m 3 /h) FEATURES n High-flow system for faster tank-fill and significant water output n Proven motor and pump technology for long-term reliability n Robust IP66, NEMA 4 enclosure minimizes impact from wildlife, insects, dust, and weather n DC solar array n Operating status indicated by multi-color D n Terminals provided for an optional data communications board n Max Power Point Tracking (MPPT) for maximizing efficiency of input power n Soft-start feature prevents water hammer and increases system life n Allows use of new solar array or retrofit to existing array (subject to size and performance check) n Simple installation with no required maintenance n Built-in diagnostics and protection n CE, C-Tick, culus and UL approved UF 111 SOLAR KITS MODEL PART No. SOLAR PUMP (BSPP) m 3 /h Stages Solar pump MOTOR kw FLOW SWITCH (NPT) 119-FDSP 0,55 kw G 1 19 VS 1/19 0,75 C FDSP 1,1 kw M 1 26 VS 1/26 1,1 C FDSP 0,55 kw T 2 10 VS 2/10 0,75 C FDSP 1,1 kw U 2 20 VS 2/20 1,1 C FDSP 0,55 kw P 4 7 VS 4/07 0,75 F FDSP 1,1 kw S 4 14 VS 4/14 1,1 F FDSP 1,1 kw U 6 9 VS 6/09 1,1 F FDSP 1,1 kw W 7 11 VS 7/11 1,1 F FDSP-0,55 KW 210-FDSP-0,55 KW 45 5, , , , , ,60 FLOW (lpm) ,35 0,90 FLOW (m 3 /h) FLOW (lpm) FLow (Liters/Minute) ,20 2,70 2,30 1,80 FLOW (m 3 /h) 1, ,45 0, V 98V 112V 126V 140V 154V 168V 0,45 84V 98V 112V 126V 140V 154V 168V DRIVE INPUT POWER (WATT) DRIVE INPUT POWER (WATT)

114 UF FRANKLIN ECTRIC FHOTON TM SOLARPAK - SOLAR KITS 407-FDSP-0,55 KW 126-FDSP-1,1 KW 160 9, , ,63 8, , ,70 7, , FLOW (lpm) ,40 5,91 5,45 5,00 4,10 4,10 3,64 3,20 FLOW (m 3 /h) FLOW (lpm) ,80 1,35 0,90 FLOW (m 3 /h) SOLAR KITS V DRIVE INPUT POWER (WATT) 2,70 2,30 1,80 1,35 0,90 0, , V 199,5V 228V 256,5V 285V 313,5V DRIVE INPUT POWER (WATT) 220-FDSP-1,1 KW 414-FDSP-1,1 KW 160 9,60 9, ,63 8, , ,70 7, ,81 FLOW (lpm) ,40 5,91 5,45 5,00 4,10 4,10 3,64 3,20 FLOW (m 3 /h) FLOW (lpm) ,80 1,35 0,90 FLOW (m 3 /h) 40 2,70 2, V DRIVE INPUT POWER (WATT) 1,80 1,35 0,90 0,45 0, V 199,5V 228V 256,5V 285V 313,5V DRIVE INPUT POWER (WATT) 609-FDSP-1,1 KW 711-FDSP-1,1 KW , , ,10 FLOW (lpm) FLow (Liters/Minute) Flow (Cubic meters/hour) FLOW (m 3 /h) FLOW (lpm) ,00 6,80 5,68 4,54 FLOW (m 3 /h) , , , V 159V 185.5V 212V V 265V 291.5V Drive Input Power (Watts) DRIVE INPUT POWER (WATT) 0 132,5V 159V 185,5V 212V 238,5V 265V 291,5V DRIVE INPUT POWER (WATT)

115 FRANKLIN ECTRIC FHOTON TM SOLARPAK HR - SOLAR KITS UF The Fhoton TM HR SolarPAK system features helical rotor pumps and generates substantial water pressure at lower flows, providing water even during times of indirect sunlight. SOLARPAK HR CONTENTS n Franklin Electric 4 submersible motor 0,75/1,1 kw n Franklin Electric 4 submersible helical rotor pump n Fhoton TM solar controller 0,55 kw/1,1 kw n Flow switch n Variety of flow rates available: 10, 25 e 50 lpm (0,6, 1,5 e 3 m 3 /h) FEATURES n 4 NEMA standard construction dimensions n Flex-shaft that allows for minimal radial wear to the motor n Proprietary software provides increased dry-run and low-flow protection without the need for external devices n 4 Franklin Electric motor n Built-in check valve n Pump upthrust washer serves as additional shaft protection from excessive wear in the event of reversed rotation n Serviceability by pump and motor detaching when needed n Unique HR Fhoton TM drive algorithm provides increased starting torque levels 113 SOLAR KITS MODEL PART No. SOLAR PUMP (BSPP) m 3 /h MOTOR kw FLOW SWITCH optional (BSPP) 10-FDSP 0,55 kw-hr Y 10 0,75 C25 25-FDSP 0,55 kw-hr A 25 0,75 C25 50-FDSP 1,1 kw-hr C 50 1,1 C25

116 UF FRANKLIN ECTRIC FHOTON TM SOLARPAK HR - SOLAR KITS 10-FDSP-0,55 KW-HR , m 11 25m 40 m 0, SOLAR KITS 25-FDSP-0,55 KW-HR FLOW (lpm) V 75V FDSP-1,1 KW-HR 91V 104 V 55m 70m 85m 100 m 115m 165V 120V 135V DRIVE INPUT POWER (WATT) 150V 0,57 0,45 0,34 0,20 0,10 FLOW (m 3 /h) 28 10m 20m 30m 40 m 50m 70 4,10 FLOW (lpm) V 1,60 60m 70m 80m 90m 1,36 130V 117V 1, V 0,90 91V 0,68 0,44 FLOW (m 3 /h) FLOW (lpm) m 20m 30m 40m 50m 60m 70m 3,60 80m 90m 250V 3,18 150V 175V 200V 225V 2,70 2,30 1,80 1,40 0,90 FLOW (CUBIC METER/HOUR) FLOW (m 3 /h) 4 2 0, , DRIVE INPUT POWER (WATT) DRIVE INPUT POWER (WATT) FRANKLIN ECTRIC FHOTON TM - SOLARPAK ACCESSORIES F E Flow paddle switche for flow rates above 4 m 3 /h C H Inline flow switch for flow rates up to 4 m 3 /h Level switch G Device used to detect the level of liquid within a tank

117 SHURFLO - PUMP FOR PV SYSTEMS FOR PUMPING WATER FROM WELLS UF SUBMERSIB PUMP FOR DEEP WELL These diaphragm pumps are designed to be installed in well with at least 100 mm of diameter, up to 70 m of depth. n Features: Flow rate per hour: ltres of water. The pump operates with 2 x 48 watt solar modules, absorbing 4 amps. The main features of this pump include an internal bypass which prevents idraulic overload in case of too deep submersion of the unit and dry running capability without pump damage. Model Pump 9300 Part No Voltage 24 V Flow rate l/h Self-priming up to 30 m Max head up to 70 m Max absorption 4 A Weight kg (lbs) 2,72 (6) PUMP 9300 FLOWCHART Total Min power head Flow rate PV system Amp 6,1 m 443 l/h 58 W 1,5 A 12,2 m 432 l/h 65 W 1,7 A 18,3m 413 l/h 78 W 2,1 A 24,4 m 401 l/h 89 W 2,4 A 30,5 m 390 l/h 99 W 2,6 A 36,6 m 382 l/h 104 W 2,8 A 42,7 m 375 l/h 115 W 3,1 A 48,8 m 371 l/h 123 W 3,3 A 54,9 m 352 l/h 135 W 3,6 A 61,0 m 345 l/h 141 W 3,8 A 70,1 m 310 l/h 155 W 4,1 A LCB PUMP CONTROLR SHURflo LCB pump controllers are high quality DC power converters designed to interface between a DC (solar) pump, (e.g. SHURflo 9300 Series) and the DC power source solar panels or batteries, etc. Their main function is to maximise the daily output of water while providing protection for the pump. When used in a solar pumping system, directly connected to solar power, it will protect the pump from over-voltage and over-current conditions and will also provide current boosting in low sunshine conditions. 115 PUMP FOR PV SYSTEMS FOR PUMPING WATER FROM WELLS G B

118 UF 116 SOL IP - WATER PUMP INVERTER UF - SOL IP - WATER PUMP INVERTER Aspire solar inverter is specially designed for water pump application. This solar inverter is built-in with low maintenance cost. It becomes an eco-friendly solution for the rural areas where grid power is expensive and unreliable. n Built-in MPPT solar charger n Supports single phase or three-phase asynchronous motor depending on models n Built-in full protection and self-diagnosis n Soft start function prevents water hammer effect and extends system lifecycle n Comprehensive Ds and display screen for real-time system status n Remote monitoring through RS-485 n Optional remote panel available Remote panel (optional) MODEL Aspire 2.2KW Aspire 7.5KW Aspire 11KW Part No Z B D Rated output power 2200 W (3HP) (supports 7500 W (10HP) (supports W (15HP) (supports 0.75~3HP water pump) 3~10HP water pump) 10~15HP water pump) PV INPUT (DC) Maximum DC voltage 450 VDC 800 VDC 800 VDC Start-up voltage 120 VDC 250 VDC 250 VDC Recommended MPPT voltage range 300 VDC ~ 400 VDC 500 VDC ~ 600 VDC 500 VDC ~ 600 VDC AC INPUT Input voltage 220/230/240 VDC (-15% ~ +10%) N/A N/A Input frequency 47 Hz ~ 63 Hz N/A N/A OUTPUT Nominal voltage 220/230/240 VAC 3x 380/400/415/440 VAC 3x 380/400/415/440 VAC Efficiency >97% >97% >97% Nominal output current 5 A 15 A 22 A Motor type 3-phase asynchronous motor 3-phase asynchronous motor 3-phase asynchronous motor Frequency precision ±0.2% ±0.2% ±0.2% Full protection Phase lost, dry pumping, motor locked, weak sunlight, over-voltage, under-voltage, over current, surge, over-temperature and short circuit protection IP protection IP20 IP20 IP20 Communication port RS-232/RS-485 RS-232/RS-485 RS-232/RS-485 Humidity <95% RH (non-condensing) <95% RH (non-condensing) <95% RH (non-condensing) Operating temperature -20 C ~ 45 C at 100% full load, 46 C ~ 60 C power derating Dimensions mm ( ) DxWxH 110x230x342 (4.3x9.1x13.5) 110x230x342 (4.3x9.1x13.5) 110x230x342 (4.3x9.1x13.5) Net weight kg (lbs) 5,5 (12.1) 6 (13.2) 6,5 (14.3)

119 PUMPING SOLAR SYSTEM COMPONENTS BO FOR PHOTOVOLTAIC STRINGS PARALL CONNECTION PUMPING SYSTEM COMPONENTS UF Photovoltaic Field: must be able to provide the power needed to enable the proper functioning of the inverter module. The single string must be composed of a number panels placed in series with a voltage must be in the voltage range VDC. The global power of the string will be directly related to the number of the series panels of a single string, roughly in the range 4.75 to 5 kwp. The number of strings in parallel must be closely related to the maximum power of the inverter according to the following proportion: Power Photovoltaic Field = Inverter Power x 1,1 Box Parallel String: enables the connection of several strings of panels in parallel. Inverters Photovoltaic: its power must be related to the power of the three-phase pump roughly according to the following proportion: Inverter Power = Power Pump x 1,2 Three-phase pump: must be designed for a 400 VAC operation and for a frequency of 50 Hz, and must be proportionate both to the photovoltaic power that to the inverter. n Single volt string (VOC): V n Operating temperature: C n Operating humidity: < 90% n Ventilation: Natural n IP: 20 n Max. voltage: 400 VAC n Max. load efficiency: > 95% n Certifications: CE - EN MODEL PART No. INVERTER POWER POWER OUTPUT UF-IPT4K V 4,0 kw UF-IPT5K ,5 kw UF-IPT7K Z 7,5 kw UF-IPT11K B 11,0 kw UF-IPT15K K 15,0 kw UF-IPT18K M 18,5 kw UF-IPT22K P 22,0 kw UF-IPT30K S 30,0 kw MA POWER MECH. PUMP 3,0 kw / 4,0 hp 4,0 kw / 5,5 hp 5,5 kw / 7,6 hp 7,5 kw / 10,0 hp 11,0 kw / 15,0 hp 13,0 kw / 17,5 hp 15,0 kw / 20,5 hp 22,0 kw / 30,0 hp SUGGESTED POWER PV FIELD 4,5 kw 6,0 kw 8,5 kw 12,0 kw 16,5 kw 20,5 kw 24,5 kw 33,0 kw DIMENSIONS mm ( ) 400 x 620 x 250 (15.7 x 24.4 x 9.8) 470 x 720 x 250 (18.5 x 28.3 x 9.8) WEIGHT kg (lbs) 20 (44.1) 30 (66.1) 35 (77.2) 117 PUMPING SYSTEM COMPONENTS BO FOR PHOTOVOLTAIC STRINGS PARALL CONNECTION n Input and output up to 800 VDC n Input protection with 15 A fuse n IP66 MODEL PART No. DESCRIPTION UF-SPS2 UF-SPS3 UF-SPS4 UF-SPS5 UF-SPS6 UF-SPS8 UF-SPS U W Y A C E N Box for parallel connection of N.2 photovoltaic strings Box for parallel connection of N.3 photovoltaic strings Box for parallel connection of N.4 photovoltaic strings Box for parallel connection of N.5 photovoltaic strings Box for parallel connection of N.6 photovoltaic strings Box for parallel connection of N.8 photovoltaic strings Box for parallel connection of N.9 photovoltaic strings

120 UF UF - STAND-ALONE PV KITS 118 STAND-ALONE PV KITS LIGHTING KITS These kits provide 12VDC power for lighting gardens, garage, rural houses, etc. n The kit includes: 2 solar panels 1 Victron Energy charge controller 1 battery 3 12 VDC lamps 2 connection cable Model Q.ty U-KIT80 U-KIT120 U-KIT160 U-KIT200 U-KIT240 Part No M P S U W PV panel 2 40 Wp 60 Wp 80 Wp 100 Wp 120 Wp Charge controller 1 10 A with LVD 10 A with LVD 20 A with LVD 20 A with LVD 20 A with LVD Battery 1 AGM 12V 60 Ah AGM 12V 60 Ah AGM 12V 90 Ah AGM 12V 110 Ah AGM 12V 110 Ah Lamp 3 DC E27 12V/7W D DC E27 12V/7W D DC E27 12V/7W D DC E27 12V/7W D DC E27 12V/7W D Connection cable 2 3 m (9.8 ) 3 m (9.8 ) 3 m (9.8 ) 3 m (9.8 ) 3 m (9.8 ) x 3 HIGH POWER LIGHTING KITS The amount of energy supplied allows, besides lighting, also the operation of a refrigerator 12/24V. n The kit includes: 2 solar panels 1 Victron Energy charge controller 2 batteries 5 24 VDC lamps 2 connection cables 12/24V - 60 litres refrigerator is to be ordered separately - Part N T Model Q.ty U-KIT600HP x 5 Part No Y PV panel Wp Charge controller 1 BlueSolar 30 A Battery 2 GEL 12V 2x220 Ah Lamp 5 DC E27 24V/7W Connection cable 2 3 m (9.8 )

121 UF - MONITORING KITS UF 24V MONITORING KIT kwh STORAGE ENERGY n The kit includes Z: 1x mounting rail kit for 2 solar panels up to 150 W 1x 10 m black solar cable 1x 10 m red solar cable 1x pole bracket for solar panel 1x Morningstar SS-10L-24V charge controller 2x Victron Energy 12V/38A AGM batteries 2x 12V UF80PM solar panels 24V MONITORING KIT kwh STORAGE ENERGY n The kit includes B: 1x mounting rail kit for 2 solar panels up to 150 W 1x 10 m black solar cable 1x 10 m red solar cable 1x pole bracket for solar panel 1x Morningstar SS-20L-24V charge controller 2x Victron Energy 12V/60A AGM batteries 2x 12V UF120PM solar panels 119 MOUNTING KITS UF - PV KITS FOR CARAVANS KITS 40 Wp 120 Wp Kits designed to be used on campers, carvans, multivans etc. n The kit includes: 1 solar panel 1 charge controller 1 combiner 1 roof conduit complete with 3 m cable 1 pair of supports for solar panel Model Q.ty U-KIT40 U-KIT60 U-KIT80 U-KIT100 U-KIT120 Part No Z B S U PV panel 1 40 Wp 60 Wp 80 Wp 100 Wp 120 Wp Charge controller 1 10 A 10 A 10 A 10 A 10 A Parallelator 1 4 A 4 A 4 A 4 A 4 A

122 UF UF - SOLAR LIGHTING FOR ROADS, PARKS AND GARDENS 120 D LIGHT - BQ-RL900 D 30W-12V n Features: - High-brightness Ds (Osram oval) - Supplied with a device to transfer of passive heat at long-distance - Low weight: 4,9 kg only - CE SOLAR LIGHTING Model BQ-RL900 D 30W-12V Part No L Led lamp output lumens 3000 Lm Rated voltage 12 V DC Rated current 2,5 A DC Rated power 30 W Operating voltage 12V Cool white light temperature 6,000 7,000 K Warm white light temperature 2,700 3,500 K Operating temperature C IP protection IP 65 Duration > 50,000 hours Dimensions mm ( ) 520 x 240 x 120 (20.5 x 9.5 x 4.7) Weight kg (lbs) 4,9 (10.8) FULL KIT FOR LIGHTING Y The kit includes: - D street light: L - Arm for street light: N - Pole supports for 1 PV panel and battery box: Y Wp solar panel: T - 1 AGM 100Ah 12 VDC battery: L - 1 SunLight 12 VDC charge controller with LVD - Fixing components: Picture purely indicative MOUNTING RAIL KIT FOR ONE SOLAR PANEL UP TO 150 W N n 2 mounting rails 750 mm n 4 end clamps n 4 brackets n 4 screws + 4 nuts/washers

123 UF - SOLAR D MARINE LANTERNS Light and compact marine lanterns, equipped with ultra bright Ds and built-in solar charging. UF n Marine applications: Navigation buoys; Mooring buoys; Private docks and marinas; Input channels to ports and marinas; Lagoon vie and navigation channels; Offshore oil and gas infrastructure; Areas restricted to navigation; Booms; Buoys research institutions; Protected marine parks, perimeters in aquaculture farms, etc. n Land applications: Bus stop signals; Emergency telephones; Camping services; Agricultural buildings etc. M550 MODEL - Visibility up to 2-3 miles (depending on the installation area and flashing applied) Waterproof, robust: it is not damaged by vibration or motion of the sea, is vandal-resistant and requires no maintenance. Available with 40 flashes + steady light B (optional). It can be used also as night light signal. Peak intensity (white D) Available D colours (IALA specifications) 26 cd red, green, blue, yellow, white Operating temperature from -30 to +50 C Polycarbonate lenses Battery (5 years average life) IP protection UV-stabilized not replaceable IP68 Weight kg (lbs) 0.37 (0.8) Certifications: CE EN 60945:1997, RoHS compliant. M650 MODEL - Visibility 3 nautical miles (3,6 km) in most conditions High performance, waterproof, resistant to sea waves, it requires no maintenance. It can be setted when ordering: more than 256 flashes available + steady light. 121 MARINE LANTERNS Solar panel 1,6 W with MPPT technology Peak intensity (green D) 44 cd Available D colours (IALA specifications) red, green, blue, amber, white Operating temperature from -43 to +51 C Polycarbonate lenses UV-stabilized High quality pure lead battery 5 years life IP protection IP68 Weight kg (lbs) 1,58 (3.5) Certifications: SCN MODEL - Visibility more than 3 nautical miles (3,6 km) in areas of lower sunlight levels High performance, waterproof, resistant to sea waves, it requires no maintenance. Solar panel 4,2 W with MPPT technology Peak intensity (green D) 50 cd Available D colours (IALA specifications) red, green, yellow, white Operating temperature from -40 to +60 C Lenti policarbonato UV-stabilized High quality Lithium-ion battery 10 years life IP protection IP67 Weight kg (lbs) 4,2 (9.3) Certifications:

124 UF UCS - AV SERIES ECTRICAL HATCH LIFTERS The AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal selflocking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure an emergency device allows for manual opening. 122 ECTRICAL LINEAR ACTUATORS TECHNICAL FEATURES n According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installation for heavier loads. It is also possible to install more then two AV actuators in multiple applications. n Maximum load for single installations: 1200N (120 kg lbs) n Maximum load for dual installations: 2400N (240 kg lbs) n Maximum load is recommended not to be exceeded. n Supplied with all mounting hardware. n Stainless steel telescopic ram for manual operation in case of emergency. n Available on request without manual emergency opening device for high performance boats. n Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position. n IP 65 protection rated n Speed: 25mm/sec no load applied, 17 mm/sec maximum load n Current absorption in single installations: 10A at 12V, 5A at 24V n Current absorption in dual installations: 20A at 12V, 10A at 24V n AV 12VDC models are Ignition Protected. UL ISO8846 approved (1.06 ) Ø 6.5 BRACKET Ø Ø (1.65 ) MODEL PART No. VOLTS STROKE NGTH A (FULL CLOSED ACTUATOR) 27.5 (1.06 ) The rear bracket allows a 125 oscillation range of the actuator ETERNAL DIA. AV C 12V DC 300 mm (12 ) 677 mm (26.6 ) 48 mm (1.9 ) AV E 24V DC 300 mm (12 ) 677 mm (26.6 ) 48 mm (1.9 ) AV D 12V DC 450 mm (18 ) 827 mm (32.5 ) 48 mm (1.9 ) AV F 24V DC 450 mm (18 ) 827 mm (32.5 ) 48 mm (1.9 ) AV H 12V DC 600 mm (24 ) 977 mm (38.4 ) 48 mm (1.9 ) AV K 24V DC 600 mm (24 ) 977 mm (38.4 ) 48 mm (1.9 ) OPTIONAL COMPONENTS: RB Y Relay box 12V RB C Relay box 24V It contains the relays needed for cycle revertion. SW J 1 x 3 way single pole momentary switch BR/AV I Spare fixing bracket SW20 RB12

125 UCS - ULYSSES SERIES ECTRICAL LINEAR ACTUATORS TECHNICAL FEATURES n Single installation only n Pull and push maximum load: 650N (65 kg lbs) n Pull and push maximum load is recommended not to be exceeded. n Supplied with all mounting hardware. n Aluminium ram. n Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position. n IP 65 protection rated n Speed: 12V model: - 5 mm/sec no load applied - 4 mm/sec maximum load 24V model: - 8 mm/sec no load applied - 6 mm/sec maximum load n Current absorption: 2A at 12V, 1A at 24V OPTIONAL COMPONENTS: SW J 1 x 3 way single pole momentary switch BR/UL P Spare fixing bracket , ,5 6, , , , AV Actuator Relay Box (optional) Switch (optional) Ø A AV Actuator Relay Box (optional) Switch (optional) UF 123 ECTRICAL LINEAR ACTUATORS Highest installation flexibility: 180 oscillation range Battery (not supplied) Fig. 1 Fig. 2 Battery (not supplied) MODEL PART No. VOLTS STROKE NGTH A (FULL CLOSED ACTUATOR) ETERNAL DIA. ULYSSES Q 12V DC 180 mm (7 ) 515 mm (20.3 ) 34 mm (1.3 ) ULYSSES S 24V DC 180 mm (7 ) 515 mm (20.3 ) 34 mm (1.3 ) ULYSSES 3012 ULYSSES R 12V DC T 24V DC 300 mm (12 ) 635 mm (25.0 ) 34 mm (1.3 ) 300 mm (12 ) 635 mm (25.0 ) 34 mm (1.3 )

126 UF UCS - CRM CONTROL PANEL 124 Push button part No B TH Thermostat part No K CRM CONTROL PANEL KP Push button part No K RS Rain Sensor part No K WS Wind detector part No V RC Remote Control part No L Chain actuator Chain actuator Rack actuator Spindle actuator CRM CONTROL PANEL The meteorological CRM control panel, controls up to four actuators or group of actuators independently and, allows the automatic closing of the windows in case of rain or wind alarm conditions detected by the sensors or by the intervention of the thermostat. MODEL CRM1 CRM2 Part No J I Input voltage supply 230 Vac 230 Vac Output voltage supply 24 Vdc 230 Vac Output (max load each output) 4 for 1 A 4 for 1,5 A Technical features of the connected actuators Electric connection 2 wires 3 wires + earth Operation by polarity inversion - Absorption (with max load) 4 A 6 A

127 UCS - CRM CONTROL PANEL - ACCESSORIES KP PUSH BUTTON K Using this push button it is possible to select and drive separately the four actuators or groups of actuators, or operate the four lines contemporary. UF RC REMOTE CONTROL L On the KP push button there is an infra-red receiver that allows the use of the RC remote control having the same functions of the push button. The remote control is supplied with a proper wall support. 125 PUSH BUTTON B It is possible to operate manually all the actuators contemporary, connecting to the CRM a standard double push button with return spring. The closing and opening inputs are memorized for three minutes in order to allow also at the actuators with very long stroke to complete their movement. The control panel is arranged for the connection of three sensors that control the weather events: TH THERMOSTAT K The thermostat, if present, has the priority on the manual control: if the temperature is superior to the set one, the windows open, if inferior the windows close; to disable the thermostat act on its selector. Particularly suitable for conservatories and mansards. Built in on/off switch. RS RAIN SENSOR K In case of rain, the rain sensor sends the signal for window automatic closing that is indicated by a red D in front of the control panel; it is possible to disconnect this sensor acting on the on/off switch on the front of the control panel. Further to the sensor intervention it is not possible, without disabling this sensor, to control the actuators until 8 min. after the end of the event. A heating element prevents dew formation on the surface. Particularly suitable for roof windows and sloping top hinged windows. WS WIND SENSOR V It emits a variable signal according to the wind intensity and acts on the control panel as the rain sensors do. With reference to the anemometer, it is possible to choose, using a rotating selector with 10 positions, at which wind speed the control panel operates the closing. Selecting 0 the anemometer is disabled while positions from 1 to 9 correspond to Beaufort wind force scale. UCS - SOLAR POWER SYSTEM ULTRA 24 VDC Compact solar charging and power unit for 24Vdc motors, equipped with batteries and Radio Receiver: no need to run wires down to power supplies or wall switch Very convenient solution for installations: - where it is difficult to run wires (renovation in residential houses or ancient buildings, roof windows, replacement of actuators with different electrical connection/voltage supply ) - without power sources (conservatories, sunrooms, greenhouses, pergolas, sun blades). Dimensions: 535 x 87 x 37 mm 2 mounting clips for quick and easy installation Cable length: 300 mm Output: 24 Vdc/2A 2,5 Watt Solar panel, Multichristaline 1500 mah LiFePO4 Battery SOLAR ULTRA 24 Vdc D RADIO REMOTE CONTROL 1 channel E RADIO REMOTE CONTROL 9 channels F CRM CONTROL PANEL ACCESSORIES - SOLAR ULTRA PANEL

128 UF UCS - SMOKE VENTILATION CONTROL PANELS 126 SMOKE VENTILATION CONTROL PANELS A very versatile range of smoke ventilation control panels, provided of back-up batteries: they operate 24 Vdc actuators for smoke and heat extraction in case of fire, and control the automation of single or multiple windows for natural ventilation even in a multy-storey building. The opening command for smoke extraction is controlled by smoke detectors, emergency push buttons, fire alarm systems or Building Management Systems (BMS) by free potential normally closed inputs. Fire alarm conditions and control panel faults are signalled on the emergency push button. To provide comfort and energy saving, natural ventilation is granted operating automatically the windows according to the environmental conditions detected by the sensors. In addition, for natural ventilation, windows can be manually controlled by zones through local push-buttons. C-SV and C-SV IB control panels have been designed, tested ad certified according to EN part 10 and pren part 9 by IFT Rosenheim (pending test). POWER Voltage supply input Vac, Hz Voltage supply output 24 Vdc (±25%) Voltage output operation Aux voltage output Nominal current Back up battery FEATURES Smoke vent zone 1 Polarity inversione 24 Vdc 4 A / 8 A / 13 A / 20 A 2x 12 Vdc (sealed lead-acid batteries) Natural vent zone 2 Smoke/heat detector Max 10 Emergency push button Emergency closing button Emergency output Natural vent push button Max 10 (integrated push button on the front of the control panel on IB version only) Max 10 (normally open contact) Clean contact (e.g. acoustic alarm) External (integrated push button on the front of the control panel on IP version only) Rain sensor Max 1 Wind sensor Max 1 CO2 sensor Max 1 Thermostat Max 1 NOTE: the summarized values on the above table might be varied according to the final installation. For any further information please contact our sales department.

129 UCS - SMOKE VENTILATION CONTROL PANELS UF Smoke detectors Q Rain sensor K Emergency push buttons T Emergency closing buttons Interlock to other C-SV Connection to BMS or FIRE ALARM SYSTEM MODEL C-SV 4A PART No A NOMINAL CURRENT 4A PUSH BUTTON Not included BATTERIES Included C-SV 8A B 8A Not included Included 300 x 300 x 150 Wind sensor V CO2 sensor L Thermostat K NV push button H DIMENSIONS (mm) 300 x 300 x SMOKE VENTILATION CONTROL PANELS C-SV 13A Z 13A Not included Included 400 x 400 x 150 C-SV 20A C-SV IB 4A C-SV IB 8A C-SV IB 13A C-SV IB 20A H C D A I 20A 4A 8A 13A 20A Not included Integrated on the front of the control panel Integrated on the front of the control panel Integrated on the front of the control panel Integrated on the front of the control panel Included Included Included Included Included 400 x 400 x x 300 x x 300 x x 400 x x 400 x 150

130 UF 128 SMOKE VENTILATION CONTROL PANELS - ACCESSORIES UCS - SMOKE VENTILATION CONTROL PANELS - ACCESSORIES OPTICAL SMOKE DETECTOR Q Smoke detection by infrared light diffusion for Tyndall effect. It is certified according to the UNI EN 54-7/9 regulations. Alarm signal through the red led. RESPONSE TIME 3 sec approx. VOLTAGE SUPPLY 24 V (min. 10 V, max. 30 V) TEMPERATURE RANGE C DEGREE OF HUMIDITY < 95% MA AIR SPEED 10 m/s DETECTED SURFACE 40 m2 A frequent cleaning, especially in dusty environments, is recommended. EMERGENCY PUSH BUTTON T It s necessary to break the safety strip to open the glass and operate it. Emergency push button allow to control by Ds the status of the system, reset the control panels and close the window at the end of the emergency. FLUSH MOUNT DOUB PUSH BUTTON H Once connected to control panel allows to operate all window for natural ventilation. WS WIND SENSOR V It emits a variable signal according to the wind intensity and acts on the control panel as the rain sensors do. TH THERMOSTAT K The thermostat opens or closes windows when temperature settings are exceeded. Built in on/off switch. BATTERIES FOR C-SV AND C-SV IB V Spare part for C-SV and C-SV IB control panel 4A or 8A, formed by two pieces of 12 V, 4,5 Ah batteries. ACOUSTIC ALARM DEVICE C Outward self-fed siren 24 V, stainless steel box with polycarbonate cover, sonorous power 115 db, voltage supply 24 V - 2 A, battery 12 V, 2 Ah. Dimensions: 236x280x99 mm RS RAIN SENSOR K In case of rain, the rain sensor sends the signal for window automatic closing. CO L The CO2 sensor, if present, has the priority on the manual control. Suitable for conference and meeting rooms, offices, schools/nurseries, passive and low-energy housing. 2 switch outputs CO2 controlled for 2 stage control, with manual and automatic mode as well as display of switching status. 3x 0 10 V outputs for CO2, temperature and relative humidity. Compatible C-SV, IB-SV only. DIAGNOSTIC KIT (CAB + SOFTWARE) M In the event of anomalies or installation problems, it is possible to interrogate the C-SV control panels using a special diagnostic USB cable connected to a simple computer. A dedicated software allows you to monitor in real time the operating parameters of the control panel (primary power supply, battery voltage, etc.) and to trace the origin of any faults by reading the associated error code C Spare part for C-SV and C-SV IB control panel 13A or 20A, formed by two pieces of 12 V, 9 Ah batteries.

131