HOSPITAL BEDS & STRETCHERS. Solutions Start Here

Transcription

1 HOSPITAL BEDS & STRETCHERS Solutions Start Here

2 Toronto SMP WORLDWIDE Global Distribution Sales and Service in over 30 Countries In Accordance With

3 ABOUT US We are a company that draws on innovation and excellence to provide solutions that enhance the ability for caregivers to effectively fulfill their duties. Our goal is to build a high-performing medical technology company that gives healthcare providers the tools they need to achieve better outcomes. We are committed to helping our customers deliver safer, more efficient, technologically advanced equipment to the market place. Caregivers throughout the world look to us for solutions because we strive for excellence and adhere to their suggestions for improvement. We bring the passion, dedication, innovation and the drive in developing solutions that matter in making a difference in the lives we help save. Our products comply with world renowned healthcare standards such as NFPA, HTM, CSA, CE, FDA, IEC, UL and ISO We continuously strive to achieve superior clinical results, and push the frontiers of medical research while maintaining uncompromising clinical integrity. Our strategic alliances extend to over 30 countries. Our partners rely on us regularly to provide quality turn-key solutions to better serve the health care industry. We take great pride in providing accredited products that meet and exceed industry requirements. At SMP, we don t just make promises, we deliver results! SOLUTIONS START HERE...

4 ICU BEDS TABLE OF CONTENTS SMP-7000 ELITE SMP-6500 SMP-6250 SMP-6000 GENERAL PATIENT ROOM BEDS SMP-4320 SMP-575 SMP-565 SMP-550EL SMP-525EL SMP-313CB SMP-313EL PEDIATRIC BEDS SMP-PB1000 SMP-PB900 SMP-PB800 SMP-PB

5 HOMECARE BEDS SMP-HC900 SMP-HC800 SMP-HC700 MANUAL BEDS SMP-385MT SMP-375MT SMP-350ML SMP-300ML SMP-200ML SMP-100ML TRANSPORT STRETCHERS SMP-4000 ELITE SMP-3000 SMP-3000M SMP-2000 SMP-450ML PATIENT TRANSPORT CHAIRS SMP-TCX6 SMP-TCX5 BEDS ACCESSORIES BEDS ACCESSORIES

6 ICU BEDS SMP-7000 ELITE with integrated weight scale system Introducing the all new SMP-7000 ELITE. This revolutionary ICU bed is a fully automatic bed loaded with design innovations, a comprehensive integrated weight scale system, enhanced patient positioning, and easy to use controls, making this bed surpass any other bed in the industry. Designed to have all the benefits for the patient and caregiver in mind backed by excellent quality standards and years of superior service the SMP-7000 ELITE is perfect for any healthcare facility. Comprehensive integrated weight scale system Power operated backrest, height and legrest Power operated trendelenburg, reverse trendelenburg, fowler and vascular position Retracting backrest and legrest Lockable and tuck away side rails Easy to remove head/foot boards Foldable, tuck-away, luxury side rails made of polyurethane ABS Protective rubber bumpers on each corner Auto CPR Dual sided side rail embedded controls Auto contour Nurse control panel Angle gauge Cardiac chair position with one button Shock position with one button Semi-Fowler position with one button Bed exit position with one button Examination position with one button Height adjustable stainless steel IV pole Back-up battery (full recharge in 1 hr.) Plastic crash bumpers Central brake Anti-static dual castors X-Ray translucent surface X-Ray cassette holder Dual sided manual CPR at backrest Comprehensive range of accessories available Bed exit alarm 1 Hospital Beds & Furnishings

7 ACCESSORIES IV pole with four hooks Side rail embedded patient / caregiver control Patient hand controller Central brake Anti-bedsore mattress Angle gauge Integrated weight scale system Protective side bumpers Full nurse control panel (L) 86.6 x (W) 39.4 x (H) (unit of measure: in.) (L) 2200 x (W) 1000 x (H) (unit of measure: mm) Castor size: 6 in. (150 mm) TENTE, 1 anti-static directional castor Under bed clearance: 150 mm (5.9 in.) Product weight: 155 kg. (342 lbs.) Safe working load: 230 kg. (507 lbs) WEIGHT SCALE DETAILS Equipped with a display for weight information and error indication - max 255 kg. (562 lbs.) 2-hand control - safety via Enable button plus Function button Accuracy adjustment of the measured weight with 100 or 500 grams accuracy ( or lbs) Auto compensation of the patient weight. E.g. this feature enables the staff to add or remove items from the bed, e.g. a pillow - without affecting the weight of the patient If a battery is present, the system can be woken up by activating a handset or similar Reset/Zero adjustment of the weight of the bed to omit the weight of a mattress Back angle: 0-70 (±5 ) Leg angle: 0-34 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-16 Electrical shock protection: Class I, Type B Liquid ingress protection: IPX4 - IPX6 Out of bed detection (corresponding to 50% loss of the patient weight) Weight Unit selection (kg or lbs.) Compatible with CB16 OBL, CB6/16 OBF and CB20 (not CB6 OBL) Two standard front covers available Ergonomically shaped and easy to operate High-strength plastic housing protects the electronics Protection class, SCO: IPX6 Connection to CB or MJB via a 6-wire modular jack cable 2

8 SMP-6500 SMP s line of ICU beds are fully customizable to match any of your needs. Whether it d be an ICU bed you need with all the options or whether it d be an ICU bed with just the necessities, SMP has the solution which is right for you. Each bed can be customized with many different options able to suit your needs. When it comes to customizable ICU beds... Solutions Start Here. Power operated headrest, legrest and height adjustment Trendelenburg/Reverse Trendelenburg Easy to remove head/foot boards Foldable, tuck-away, luxury side rails made of polyurethane ABS Protective rubber bumpers on each corner Electronic CPR (with nurse control panel) Accessory slots Manual knee mechanism Back-up battery (full recharge in 1 hr.) Drainage hooks Central brake X-Ray translucent surface Auto regression (100 mm) 4 LINAK motors 3 Hospital Beds & Furnishings

9 ACCESSORIES Side rail embedded patient / caregiver control Patient hand controller Telescoping IV pole with four hooks Anti-bedsore mattress Manual CPR Protective side bumpers Full nurse control panel (L) 87.6 x (W) 37.6 x (H) (unit of measure: in.) (L) 2225 x (W) 955 x (H) (unit of measure: mm) Castor size: 6 in. (150 mm) TENTE Mattress (L) 77 x (W) 33.9 x (H) 4.7 (unit of measure: in.) (L) 1950 x (W) 860 x (H) 120 (unit of measure: mm) OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Back angle: 0-90 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 2000 N / DC / IPX4 Motor 4: LINAK / 2000 N / DC / IPX4 4

10 SMP-6250 Nurse Control Panel Patient Handset Flexible Control Unit Electrical operated backrest, height and legrest adjustment Electrical operated trendelenburg, reverse trendelenburg, fowler and vascular position Patient handset Nurse control unit Auto-CPR Retracting backrest and legrest Auto contour Hygienic design (PP), lockable and tuck away side rails Sleek profile frame with easy removable ABS plastic covers Removable head and foot boards Central and directional lockable castors Electrostatic painted metal frame Height adjustable stainless steel IV pole Easy to adjust knee break position Plastic crash bumpers Battery backup Dual sided manual CPR at backrest Comprehensive range of accessories available Angle gauge for back Angle gauge for bed Cardiac chair position with one button Shock position with one button Semi-Fowler position with one button Bed exit position with one button Examination position with one button Activation key at remote control to prevent any undesired positions X-Ray translucent backrest and cassette carrier Dual sided control panel on side-rails Twin castors (Optional) Flexible control unit (Optional) Bed extension (Optional) Linen holder (Optional) Lifting Pole (Optional) Underbed light (Optional) Break release alarm (Optional) IPX4 standard electronic system (Optional IPX6) 5 Hospital Beds & Furnishings

11 ACCESSORIES IV pole with four hooks Anti-bedsore mattress Full nurse control panel *See complete list of all optional accessories on the last page. (L) 86.6 x (W) 39.4 x (H) (unit of measure: in.) (L) 2200 x (W) 99 x (H) (unit of measure: mm) Bed extension: 180 mm (7 in.) Castor size: 6 in. (150 mm) Under bed clearance: 150 mm (5.9 in.) Product weight: 158 kg. (348 lbs.) Safe working load: 230 kg. (507 lbs) Back angle: 0-70 (±5 ) Leg angle: 0-34 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-16 ELECTRICAL DATA Power In: 1.5A max. At 230V AC HZ Electrical Shock Protection: Class I, Type B Liquid Ingress Protection: IPX4 - IPX6 Batteries: 2x 12V Series Connected, sealed, rechargeable, Lead/ Acid gel, 1.2 amp hrs. 6

12 SMP-6000 ACCESSORIES IV pole with four hooks Anti-bedsore mattress Full nurse control panel Patient hand controller Side rail embedded patient / caregiver control Power operated headrest, legrest and height adjustment Trendelenburg/Reverse Trendelenburg Easy to remove head/foot boards Foldable, tuck-away, luxury side rails made of polyurethane ABS Protective rubber bumpers on each corner Manual CPR Accessory slots Drainage hooks X-Ray translucent surface Auto regression (100 mm) 4 LINAK motors (L) 85 x (W) 37.6 x (H) (unit of measure: in.) (L) 2160 x (W) 955 x (H) (unit of measure: mm) Castor size: 6 in. (150 mm) TENTE, 1 anti-static directional castor Mattress (L) 77 x (W) 33.9 x (H) 4.7 (unit of measure: in.) (L) 1950 x (W) 860 x (H) 120 (unit of measure: mm) Back angle: 0-90 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 2000 N / DC / IPX4 Motor 4: LINAK / 2000 N / DC / IPX4 OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Back-up battery X-ray cassette holder Angle indicator 7 Hospital Beds & Furnishings

13 GENERAL PATIENT ROOM BEDS SMP-4320 ACCESSORIES IV pole with four hooks Anti-bedsore mattress Full nurse control panel Patient hand controller Innovative breathable bed litter Power operated headrest, legrest and height adjustment Trendelenburg/Reverse Trendelenburg Easy to remove head/foot boards Foldable, tuck-away, luxury side rails made of polyurethane ABS Protective rubber bumpers on each corner Urine bag Accessory slots Angle indicator Back-up battery Central brake 4 LINAK motors (L) 85 x (W) 37.6 x (H) (unit of measure: in.) (L) 2160 x (W) 955 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE, 1 anti-static directional castor Mattress (L) 77 x (W) 33.9 x (H) 4.7 (unit of measure: in.) (L) 1950 x (W) 860 x (H) 120 (unit of measure: mm) Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 280 kg. (617 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 2000 N / DC / IPX4 Motor 4: LINAK / 2000 N / DC / IPX4 OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Safety straps 5th multi-directional wheel Angle indicator 8

14 500 SERIES The 500 series are a remarkable choice in electric beds allowing patients and caregivers to have complete control via the control panels conveniently located on side rails. SMP has designed these beds to improve efficiency and reliability thus increasing patient outcomes significantly. The SMP-575, 525EL and 550EL electric beds represents a true evolution of care in the modern medsurg environment. It defines itself through its ease of use, safety considerations and product quality. Simple yet efficient, the SMP 500 series is the ultimate choice for care. ACCESSORIES IV pole with four hooks Anti bedsore mattress Full nurse control panel SMP-575 Patient hand controller Central brake Side rail embedded patient / caregiver control Heavy duty frame Manual CPR Central brake Side bumpers included Electronic CPR (with nurse control panel) Patient lockout feature via nurse panel Drainage hooks X-Ray translucent surface Auto regression 4 LINAK motors (L) 86.2 x (W) 37.6 x (H) (unit of measure: in.) (L) 2190 x (W) 955 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE, 1 anti-static directional castor Mattress (L) 77 x (W) 33.9 x (H) 4.7 (unit of measure: in.) (L) 1950 x (W) 860 x (H) 120 (unit of measure: mm) Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 6000 N / DC / IPX4 Motor 4: LINAK / 6000 N / DC / IPX4 OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Back-up battery X-ray cassette holder 9 Hospital Beds & Furnishings

15 SMP-565 Nurse Control Panel Patient Handset Flexible Control Unit Electrical operated backrest, height and legrest adjustment Electrical operated trendelenburg, reverse trendelenburg, fowler and vascular position Patient handset Nurse control unit Auto-CPR Retracting backrest and legrest Auto contour Hygienic design (PP), lockable and tuck away side rails Sleek profile frame with easy removable ABS plastic covers Removable head and foot boards Central and directional lockable castors Electrostatic painted metal frame Height adjustable stainless steel IV pole Easy to adjust knee break position Plastic crash bumpers Battery backup Dual sided manual CPR at backrest Comprehensive range of accessories available Angle gauge for back Angle gauge for bed X-Ray translucent backrest and cassette carrier Dual sided control panel on side-rails Twin castors (Optional) Flexible control unit (Optional) Bed extension (Optional) Linen holder (Optional) Lifting Pole (Optional) Underbed light (Optional) Break release alarm (Optional) IPX4 standard electronic system (Optional IPX6) 10

16 ACCESSORIES IV pole with four hooks Anti-bedsore mattress Full nurse control panel *See complete list of all optional accessories on the last page. (L) 86.6 x (W) 39.4 x (H) (unit of measure: in.) (L) 2200 x (W) 99 x (H) (unit of measure: mm) Bed extension: 180 mm (7 in.) Castor size: 6 in. (150 mm) Under bed clearance: 150 mm (5.9 in.) Product weight: 158 kg. (348 lbs.) Safe working load: 230 kg. (507 lbs) Back angle: 0-70 (±5 ) Leg angle: 0-34 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-16 ELECTRICAL DATA Power In: 1.5A max. At 230V AC HZ Electrical Shock Protection: Class I, Type B Liquid Ingress Protection: IPX4 - IPX6 Batteries: 2x 12V Series Connected, sealed, rechargeable, Lead/ Acid gel, 1.2 amp hrs. 11 Hospital Beds & Furnishings

17 SMP-550EL & SMP-525EL SMP-550EL ACCESSORIES SMP-525EL IV pole with two hooks High density coco & palm fibre mattress Lifting pole Soft connection body contour frame 4 luxury side rails with patient / caregiver controls Heavy duty frame Extraordinary one button function puts the bed in ideal position for patient transport Central brake (550EL electronic central brake) Back-up battery Patient lockout controls SMP-550EL (L) 91.3 x (W) 41.3 x (H) (unit of measure: in.) (L) 2320 x (W) 1050 x (H) (unit of measure: mm) SMP-525EL (L) 85.4 x (W) 37.4 x (H) (unit of measure: in.) (L) 2170 x (W) 950 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) dual castors Back angle: 0-65 (±5 ) Leg angle: 0-45 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-10 Maximum load capacity: 250 kg. (5511 lbs.) Soft connection body contour frame 4 luxury side rails with patient / caregiver controls Detachable head / foot boards with nurse controls Innovative breathable bed litter 12

18 313 SERIES Introducing the all new SMP-313 beds providing users with functionalities of an electric bed yet being a very cost effective option for any healthcare facility. Providing the greatest comfort, quality and ease of use, these beds are sure to please the patients and caregivers alike. When an economic option in electric bed is required look no further than the SMP-313 series. SMP-313CB & SMP-313EL Heavy duty frame Back-up battery Channel frame construction provides superior strength 3 electro motors Side bumpers included Conforms to ISO 13485:2003 SMP-313 CB (L) 88.2 x (W) 43.3 x (H) (unit of measure: in.) (L) 2130 x (W) 980 x (H) (unit of measure: mm) SMP-313 EL (L) 88.2 x (W) 43.3 x (H) (unit of measure: in.) (L) 2130 x (W) 980 x (H) (unit of measure: mm) Castor size: SMP 313 CB 5 in. (125 mm) dual castors Castor size: SMP 313 CB 5 in. (125 mm) single castors Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) Maximum load capacity: 280 kg. (617 lbs.) SMP-313CB SMP-313EL Detachable head/ footboard 4 luxury side rails ACCESSORIES IV pole with four hooks High density coco & palm fibre mattress Lifting pole Patient hand controller 13 Hospital Beds & Furnishings

19 PEDIATRIC BEDS SMP-PB1000 SMP has a complete line of pediatric beds ideal for any healthcare facility. To help ease the transition between home and hospital environments, these bed with their various features and cutomizable options helps children feel more secure so they can sleep comfortably. Be assured, when it comes to the child s comfort and their safety, the SMP pediatric beds are the perfect choice. Foldable tuck away luxury side rails Patient hand controller ACCESSORIES OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Back-up battery X-ray cassette holder Heavy duty frame Manual CPR Central brake Side bumpers included Electronic CPR (with nurse control panel) Patient lockout feature via nurse panel Drainage hooks X-Ray translucent surface Auto regression 4 LINAK motors (L) 75.6 x (W) 35 x (H) (unit of measure: in.) (L) 1920 x (W) 890 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE Mattress (L) 77 x (W) 33.9 x (H) 4.7 (unit of measure: in.) (L) 1950 x (W) 860 x (H) 120 (unit of measure: mm) Back angle: 0-90 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 6000 N / DC / IPX4 Motor 4: LINAK / 6000 N / DC / IPX4 Full X-ray translucent bed surface IV pole with four hooks Anti bedsore mattress Full nurse control panel 14

20 SMP-PB900 ACCESSORIES IV pole with four hooks Patient hand controller Anti bedsore mattress Foldable tuck away luxury side rails Full nurse control panel Protective bumpers on all 4 corners Power operated headrest, legrest and height adjustment Trendelenburg/Reverse Trendelenburg Aluminum head board, foot board and side rails Protective rubber bumpers on each corner (90 mm) Manual CPR Accessory slots Linear blocking system Manual knee mechanism Drainage hooks X-Ray translucent surface Auto regression (100 mm) 3 LINAK motors 15 Hospital Beds & Furnishings OPTIONS Bed extension (18 cm) Nurse control panel Underbed light Back-up battery X-ray cassette holder (L) 78.5 x (W) 35.4 x (H) (unit of measure: in.) (L) 1995 x (W) 900 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE Mattress (L) 69.3 x (W) 28.4 x (H) 4.7 (unit of measure: in.) (L) 1760 x (W) 720 x (H) 120 (unit of measure: mm) Back angle: 0-90 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 Motor 3: LINAK / 6000 N / DC / IPX4

21 ACCESSORIES SMP-PB800 IV pole with four hooks Anti-bedsore mattress Full nurse control panel Patient hand controller Foldable tuck away luxury side rails Full X-ray translucent surface Power operated headrest, legrest and height adjustment Trendelenburg/Reverse Trendelenburg via damper mechanism Easy to remove head / foot boards Telescoping IV pole with 4 hooks Accessory slots Linear blocking system Manual knee mechanism Back-up battery (1 hour full recharge) Drainage hooks X-Ray translucent surface Auto regression (100 mm) 2 LINAK motors OPTIONS Central brake Nurse control panel Underbed light Back-up battery X-ray cassette holder Control panels on side rails (L) 75.6 x (W) 35 x (H) 20.8 (unit of measure: in.) (L) 1920 x (W) 890 x (H) 530 (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE Mattress (L) 69.3 x (W) 28.3 x (H) 4.7 (unit of measure: in.) (L) 1760 x (W) 720 x (H) 120 (unit of measure: mm) Back angle: 0-90 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) Motor 1: LINAK / 3500 N / DC / IPX4 Motor 2: LINAK / 3500 N / DC / IPX4 16

22 ACCESSORIES SMP-PB700 Stainless steel IV pole Anti-bedsore mattress Patient Hand Controller Foldable Tuck Away Luxury Side Rails Linear Locking System Power operated headrest and legrest adjustment Easy to remove head / foot boards Telescoping stainless steel IV pole Auto contour Linear locking system Manual knee mechanism Patient hand controller Plastic crash bumpers Drainage hooks Oxygen tank holder Lockable and tuck away side rails Angle gauge for back rest 2 motors (L) 73.0 x (W) 36.6 x (H) 20.5 (unit of measure: in.) (L) 1855 x (W) 930 x (H) 520 (unit of measure: mm) Castor size: 5 in. (125 mm) TENTE Under bed clearance: 17 cm Back angle: 0-70 (±5 ) Leg angle: 0-38 (±5 ) Maximum load capacity: 180 kg. (400 lbs.) 17 Hospital Beds & Furnishings

23 HOMECARE BEDS HOME CARE SERIES Home is where the heart is and there is simply no place like it. Most people want to remain in their homes when faced with a medical condition that limits mobility. SMP is there to help when such dire times arise. Introducing the SMP Home Care Series. These beds are SMP s next generation of home care beds, with unsurpassed style, comfort and quality. The Home Care Series can help make your home environment as safe and comfortable as possible. Electrostatic powder coated steel bed frame with ventilated holes Detachable high quality wooden head & foot boards Collapsible tuck away side rails Patient hand controller Solid wood exterior 3 motors 2 IV pole locations ACCESSORIES Patient hand controller Collapsible tuck away side rails Detachable wooden head & foot boards IV pole with four hooks SMP-HC900 Waterproof mattress Lifting pole (L) 81.9 x (W) 39.6 x (H) (unit of measure: in.) (L) 2080 x (W) 1006 x (H) (unit of measure: mm) Back angle: 0-75 (±5 ) Leg angle: 0-45 (±5 ) Maximum load capacity: 100 kg. (220 lbs.) 18

24 SMP-HC800 ACCESSORIES Patient hand controller IV pole with four hooks Electrostatic powder coated steel bed frame with ventilated holes Detachable high quality wooden head & foot boards Solid wood exterior 2 motors 2 IV pole locations (L) 82.7 x (W) 44.7 x (H) 15 (unit of measure: in.) (L) 2100 x (W) 1135 x (H) 380- (unit of measure: mm) Back angle: 0-75 (±5 ) Leg angle: 0-45 (±5 ) Maximum load capacity: 75 kg. (165 lbs.) 19 Hospital Beds & Furnishings Collapsible tuck away side rails Detachable wooden head & foot boards Waterproof mattress Lifting pole

25 SMP-HC700 ACCESSORIES Patient hand controller Channel frame construction provides superior strength and reduces weight Heavy duty frame Electrostatic powder coated frame Solid wood exterior 2 motors 2 IV pole locations (L) 84.3 x (W) 40.2 x (H) 15.8 (unit of measure: in.) (L) 2140 x (W) 1020 x (H) 400 (unit of measure: mm) Back angle: 0-85 (±5 ) Leg angle: 0-40 (±5 ) Maximum load capacity: 280 kg. (617 lbs.) Detachable wooden head & foot boards Collapsible tuck away side rails IV pole with four hooks High density coco & palm fibre mattress Lifting pole 20

26 MANUAL BEDS WITH TRENDELENBURG SMP-385MT SMP s manual line of beds provide users with the greatest comfort, quality and ease of use. These beds provide simple and straight-forward operations via the crank system making them the ideal beds for any healthcare facility. These manual beds are designed to have the benefits for the patient and caregiver in mind backed by excellent quality standards and years of superior service. Trendelenburg & Reverse Trendelenburg Heavy duty frame Electrostatic powder coated frame Drainage hooks Manual CPR Triple crank system Side bumpers included X-Ray translucent surface (L) 85.8 x (W) 37.8 x (H) (unit of measure: in.) (L) 2180 x (W) 960 x (H) (unit of measure: mm) Castor 5 in. (125 mm) Back angle: 0-65 (±5 ) Leg angle: 0-45 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 250 kg. (551 lbs.) 21 Hospital Beds & Furnishings Triple crank system Kitty corner castor brakes Custom color head/ foot board accents ACCESSORIES IV pole with four hooks Anti bedsore mattress Lifting pole

27 SMP-375MT ACCESSORIES IV pole with four hooks Waterproof mattress Lifting pole Soft connection body contour frame Quad crank system 4 luxury side rails Heavy duty frame Central brake Dual castors Trendelenburg & Reverse Trendelenburg Quad crank system Soft connection body contour frame Innovative breathable bed litter (L) 86.6 x (W) 41.3 x (H) (unit of measure: in.) (L) 2200 x (W) 1050 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) single castors Back angle: 0-70 (±5 ) Leg angle: 0-40 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-10 Maximum load capacity: 250 kg. (551 lbs.) 22

28 MANUAL BEDS SMP-350ML ACCESSORIES IV pole with four hooks High density coco & palm fibre mattress Lifting pole Extra low height adjustability Detachable head / foot boards Collapsible aluminum side rails Heavy duty frame Exceptionally low height promotes proper positioning for safe patient entry and exit Side bumpers included Full side rail positioning ensures patient safety, essential in any acute care environment Collapsible tuck away side rails Kitty corner castor brake Detachable head/ foot boards (L) 83.9 x (W) 38.5 x (H) (unit of measure: in.) (L) 2130 x (W) 980 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) single castors Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) Maximum load capacity: 280 kg. (617 lbs.) 23 Hospital Beds & Furnishings

29 SMP-300ML Heavy duty frame One handed side rail release Side bumpers included 4 luxury rails Central brake Detachable head/ foot boards (L) 88.2 x (W) 43.3 x (H) (unit of measure: in.) (L) 2130 x (W) 980 x (H) (unit of measure: mm) Castor size: 5 in. (125 mm) dual castors Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) Maximum load capacity: 280 kg. (617 lbs.) Central brake Detachable head / foot boards ACCESSORIES IV pole with four hooks High density coco & palm fibre mattress 4 luxury side rails Lifting pole 24

30 SMP-200ML & SMP-100ML Single crank system SMP-100ML Dual crank system SMP-200ML Heavy duty metal frame resists twisting and bending Channel frame construction provides superior strength Side bumpers included Electrostatic powder coated frame Collapsible aluminum side rails 2 IV pole locations 5 inch castors ACCESSORIES SMP-200ML (L) 88.2 x (W) 43.3 x (H) 19.7 (unit of measure: in.) (L) 2130 x (W) 980 x (H) 500 (unit of measure: mm) SMP-100ML (L) 88.2 x (W) 43.3 x (H) 19.7 (unit of measure: in.) (L) 2130 x (W) 980 x (H) 500 (unit of measure: mm) Castor size: 5 in. (125 mm) single castors Back angle: 0-80 (±5 ) Leg angle: 0-40 (±5 ) SMP-200ML only Maximum load capacity: 280 kg. (617 lbs.) IV pole with four hooks 25 Hospital Beds & Furnishings High density coco & palm fibre mattress Lifting pole 20

31 TRANSPORT STRETCHERS SMP-4000 ELITE Central brake ACCESSORIES IV pole with 2 hooks High density, water resistance fire retardant mattress Full length X-ray cassette holder Foot pedal control for gas spring functions Introducing SMP s line of patient transport stretchers. Designed to include an enhanced blend of features such as a retractable fifth wheel with central locking, and trendelenburg, our stretchers exceed performance standards and drive mobility and comfort to a new level. These stretchers will be a welcomed edition to any healthcare facility. Head & back rest adjustment via gas springs Height trendelenburg & reverse trendelenburg adjustments with hydraulic lifts Retractable fifth wheel for increased stability and maneuverability Mechanical CPR Central locking system Full length X-ray cassette holder Full length X-ray translucent surface Electrostatic powder coated metal frame and components Protective bumpers on each corner Polyurethane collapsible side rails Urine bag holder (L) 86.2 x (W) 30.5 x (H) (unit of measure: in.) (L) 2190 x (W) 775 x (H) (unit of measure: mm) Castor size: 6 in. (150 mm) TENTE, 1 anti-static directional castor Mattress (L) 75.8 x (W) 23.6 x (H) 3.2 (unit of measure: in.) (L) 1925 x (W) 600 x (H) 80 (unit of measure: mm) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 300 kg. (661 lbs.) 26

32 SMP-3000 Foot pedal control for gas spring function Manual CPR ACCESSORIES IV pole with 2 hooks High density, water resistance fire retardant mattress Collapsible side rails Protective side bumpers Inclined back rest adjusted via gas spring Trendelenburg/Reverse Trendelenburg Retractable fifth wheel for increased stability and maneuverability Height adjustment and trendelenburg operated via gas springs Central brake X-ray cassete holer Full length X-ray translucent surface Safety straps Oxygen tank holder (L) 84.3 x (W) 33.1 x (H) (unit of measure: in.) (L) 2140 x (W) 840 x (H) (unit of measure: mm) Castor size: 8 in. (200 mm) TENTE, 1 anti-static directional castor Mattress (L) 75.8 x (W) 23.6 x (H) 3.2 (unit of measure: in.) (L) 1925 x (W) 600 x (H) 80 (unit of measure: mm) Trendelenburg & Reverse Trendelenburg angle: 0-12 Maximum load capacity: 230 kg. (507 lbs.) 27 Hospital Beds & Furnishings

33 SMP-3000M Foot pedal control for gas spring functions 20 cm castors with central locking ACCESSORIES IV pole with 4 hooks High density, water resistance fire retardant mattress Collapsible side rails Protective side bumpers Inclined back rest adjusted via gas spring Collapsible aluminum side rails 20 cm castors with central locking Retractable fifth wheel for increased stability and maneuverability Minimum height of 62 cm allows easy use for the patient and hospital staff Trendelenburg/Reverse Trendelenburg Patient belt for fastening Easy adjustment by levers located on both sides X-Ray translucent sleep surface X-Ray cassette holder Oxygen tank holder Height adjustable stainless steel IV pole Plastic crash bumpers Easy to clean, telescoping pistons (L) 85 x (W) 30.3 x (H) (unit of measure: in.) (L) 2160 x (W) 770 x (H) (unit of measure: mm) Castor size: 8 in. (200 mm) Mattress (L) 75.8 x (W) 23.6 x (H) 3.2 (unit of measure: in.) (L) 1925 x (W) 600 x (H) 80 (unit of measure: mm) Backrest Angle: 90º Patient surface size: (L) 76.8 x (W) 24.4 (unit of measure: in.) (L) 1950 x (W) 620 (unit of measure: mm) Back section length: 28.7 in. (730 mm) Trendelenburg & Reverse Trendelenburg angle: 0-15 Maximum load capacity: 225 kg. (500 lbs.) 28

34 SMP-2000 Full X-ray translucent surface Collapsible side rails ACCESSORIES IV pole with four hooks High density coco & palm fibre mattress Protective side bumpers Inclined back rest adjusted via gas spring Trendelenburg/Reverse Trendelenburg Retractable fifth wheel for increased stability and maneuverability Height adjustment and trendelenburg operated via gas springs Central brake Full length X-ray translucent surface Oxygen tank holder Urine bag holder Accessory slots (L) 81 x (W) 33.3 x (H) (unit of measure: in.) (L) 2057 x (W) 845 x (H) (unit of measure: mm) Castor size: 6 in. (150 mm), 1 anti-static directional castor Bed surface: (L) 76.4 x (W) 24.4 x (H) (unit of measure: in.) (L) 1940 x (W) 620 x (H) (unit of measure: mm) Back-rest angle: 0-65 (±5 ) Knee-rest angle: 0-55 (±5 ) Trendelenburg & Reverse Trendelenburg angle: 0-13 Maximum load capacity: 159 kg. (351 lbs.) 29 Hospital Beds & Furnishings

35 SMP-450ML ACCESSORIES IV pole with four hooks Durable mattress with lifting straps 10 cm high density, fire retardant foam mattress One handed side rail release Retractable 5th wheel steering system Central brake Light weight & easy to clean Clearly marked arrows allow users to operate easily Retractable fifth wheel steering system 2 IV pole sockets Central brake Integrated oxygen tank holder Foldable tuck away luxury side rails One-handed CPR for quick response in emergencies One- handed side release (L) 75.2 x (W) 26.5 x (H) (unit of measure: in.) (L) 1910 x (W) 673 x (H) (unit of measure: mm) Angle of back section: 0-80 (±5 ) Weight: 79 kg. (174 lbs.) Maximum load capacity: 159 kg. (351 lbs.) 30

36 PATIENT TRANSPORT CHAIRS X SERIES When it comes to the need of patient transport, caregivers must be ready with the right equipment to improve the way healthcare is provided. Introducing the SMP X Series transport chairs, designed to create a welcoming and safe environment which speaks volumes to caregivers, patients and their family members. The X Series transport chairs combine exceptional design along with intuitive features to provide a product which shows that the investment made for the well-being of patients and caregivers matters. Height: 116 cm Width: 64.3 cm Depth: 100 cm ( footboard excluded) Sitting depth: 44 cm Sitting surface width: 50 cm Back rest width: 49 cm Ergonomic & smart design Excellent maneuverability Adjustable arm rests Retractable HPL footboard Central brake Medical grade leather upholstery Reclinable back rest Height adjustable IV pole TENTE front and rear castors Front castors: 30 cm Rear castors: 12.5 cm SMP-TCX6 Reclinable back rest Durable push handles Central brake 31 Hospital Beds & Furnishings

37 SMP-TCX5 Coin return mechanism Foldable footboard Retractable IV pole Ergonomic & smart design Excellent maneuverability Space saving with nestable design Hand brake system Stainless steel frame Foldable footboard Polyurethane armrests, seat and back rest for maximum comfort Height adjustable IV pole Coin return mechanism 360 swivel castors for easy maneuverability TENTE front and rear castors Front castors: 12.5 cm Rear castors: 20 cm Height: 98 cm Width: 74 cm Depth: 114 cm Sitting depth: 43 cm Sitting surface width: 47 cm Back rest width: 43 cm 32

38 BED ACCESSORIES SMP-AAM-U SMP-AMAT SMP-HMAT-UL SMP-AMAT-H Air mattress Universal for all bed models High density coco & palm fibre mattress For: SMP-100ML, 200ML, 313EL, 313CB, 350ML High density latex foam Universal for all bed models 12cm fire retardant coco & palm fibre mattress For: SMP-525EL, 550EL SMP-NAB-U22 SMP-NAB-U26 Anti bedsore clinical mattress (22 kg or 26kg) Universal for all bed models SMP-H cm high density, fire retardant foam mattress For: SMP-450ML SMP-ALP Lifting pole system For: SMP-100ML, 200ML, 313EL, 313CB, 350ML SMP-HLP Lifting pole system For: SMP-525EL, 550EL SMP-IVP-2H SMP-IVS-4H SMP-IVP-4H SMP-TSS Dual hook IV pole Universal for all bed models Quad hook IV stand with cross Universal for all bed models Quad hook IV pole Universal for all bed models Heavy duty traction system Universal for all bed models 33 Hospital Beds & Furnishings

39 OPTIONAL ACCESSORIES Angled IV pole IV pole Lifting pole Fixed headboard Bed extension X-Ray translucent backrest & casette holder Stainless steel orthopedic extension system Nurse control unit shelf Underbed light Bed linen shelf Oxygen cylinder holder Break release alarm Bed exit alarm Accessories support Arm support apparatus Wrist fastening belt Chest fastening belt Urine bag basket Backrest angle gauge Bed angle gauge 34

40 SMP Canada 10 Sims Crescent, Richmond Hill Ontario, L4B-1K9 Canada Tel: (905) Fax: facebook.com/smpworldwide twitter.com/smp_canada Solutions Start Here Distributed By: CA-BAF-36-XX