SPECIFICATIONS 2 FOWLER S. Item No. Name of the Equipment 1 ICU bed Fully Motorized

Transcription

1 Item No. Name of the Equipment 1 ICU bed Fully Motorized 2 FOWLER S BED SPECIFICATIONS *Overall Size: Aprox 2120mm L x 1020 mm W x 450 mm To 770 mm H (Without Mattress). Bed frame size 2070mmL x 960 mm W Four section ABS detachable top. *Bed frame should be mainly made from 50 x 25 mm x 2 mm thick ERW tube with proper support. *The base frame should be mounted on Approx 125mm dia non-rusting castor wheels with central and directional locking mechanism and pedal operated at the foot end of the bed. *Bed should be electrically operated: Remote control or Integrated panel for easy to operate various positions like height, back, foot movement etc. by touching single fold protection button. *It should have CPR button for emergency override to return the backrest to flat position quickly and instantly. *Degree indicator required for backrest, upper leg elevation &Trendelenburg Reverse Trendelenburg positions. *Backrest and upper leg section should retract as they are individually and simultaneously raised. *The bed should have easily detachable molded head & foot side panels and four corner buffers. *Bed should have split type swing down railings, 2 nos on each side made from non-rusting molded material. *There should be two locations on the head side of a bed to hold one stainless steel Saline rod 12 mm dia with 31.7mm dia, 18 G stainless steel outer covering tube holder with a knob to fix syringe pump holders. *Quick manual backrest release system with operating lever on both side of top frame. *Bed should have radio-translucent top (X-Ray translucent back section), Radio-lucent mattress and X-Ray cassette holder. *All mild steel components should be pretreated chemically and metal. *All Stainless Steel used should be of 304 grade *Overall size 2180mm L x 1000mm W x 600mm H. The main frame should be made from 60mm x 30mm x 16 G ERW rectangular tubes. *Four sections top should be made from uniformly perforated 18 G C.R.C.A. sheets and should be suitably fitted to the main frame. *Back-rest and knee rest should be maneuvered by the screw mechanism with one common handle. *Detachable Head and Leg Bows: Should be made from stainless steel 31.7mm dia x 18 G tube with laminated panels of approx. size 810mm L X 140mm wide X 14mm thick on stainless steel bracket. *The base frame should be fitted with non rusting swivel castor wheels of 125mm dia, 2 with brake, 2 without brakes castors housing and wheels made from high grade non floor staining synthetic materials with integrated thread guards, wheel centre having precision ball bearing to run smoothly. *The bows should be mounted to the bed frame on welded brackets in such a way that bolt or nut should not appear on top surface of the bed frame. Qty 15 50

2 3 SEMI FOWLER BED 4 WHEEL CHAIR FIXED TYPE WITH ARM REST, (SS) Four IV Rod Locations. *A mattress suitable for the bed made of 25mm thick soft 32 density top layer and 75mm thick high 40 density bottom layer for the patient comfort and better pressure care. The upper part of cover of the mattress is made of waterproof, breathable fabric separated by zip on three sides with lower cover part made of Rexene. *The sides should be fitted with Collapsible railings. *Finishing: Steel welding wherever required is be done by either by using MIG welding or Spot Welding process to minimize distortion. *All mild steel components should be pretreated chemically and metal. *All Stainless Steel PARTS used should be of 304 grade *Bed should be supplied with following accessories. Bedside rails, removable type and Stainless steel Telescopic IV Rod.. * Overall size 2180mm L x 1000mm W x 600mm H. The main frame should be made from 60mm x 30mm x 16 G ERW rectangular tubes. *Head section is capable of being raised to the angle of 70 degree from the Horizontal level. The head section slope adjustment should be achieved by separate screw mechanism. The rest of bed surface is fixed. *Head section as well as rest surface should be made of uniformly perforated, CRCA 1.25mm thick Sheet welded with the outer tube. *Nuts & Bolts: All Fasteners like nut and bolts etc. should be electrogalvanized. * Detachable Head and Leg Bows: Should be made from stainless steel 31.7mm dia x 18 G tube with laminated panels of approx. size 810mm L X 140mm wide X 14mm thick on stainless steel bracket. *Finishing: Steel welding wherever required is be done by either by using MIG welding or Spot Welding process to minimize distortion. * All mild steel components should be pretreated chemically and metal. *All Stainless Steel PARTS used should be of 304 grade. * Bed should be supplied with following accessories. Bedside rails, removable type and Stainless steel Telescopic IV Rod. *Overall approx size: 670mm W x 1120mm D x 920mm H. *Welded frame construction of round tubes of High Gloss S.S. *Minimum Frame size of round steel 22.2 x 18 G tubes. * Wheel chair should be fitted with minimum 24 diameter rim of bicycle wheels fitted on heavy duty axle with solid tyres. Wheels should have self propelling stainless steel hoofs by the side for self propulsion. *Chair should be fitted with high quality cushion seat and back covered with Rexene. *In the front, minimum 150mm diameter castor wheels should be fitted. *In front of castor wheels, aluminum foot paddles should be provided on adjustable brackets. *Two handles with the hand grips should be provided for pushing

3 5 Cylinder trolley B type 6 Bed side lockers cum bench 7 Bed side Folding Screen (3 Panels) 8 Revolving stools SS 9 Examination couch with mattress *Hand rest should be padded with comfort of patient. *Brakes should be provided on rear wheel to hold the chair to stop on ramp. *Cylinder Trolley (Push Type) fitted with 2 castors of 100mm dia. with M.S. body frame. *Suitable for B Type Oxygen gas cylinders. *Trolley with SS base. *Should not wobble on flat ground when placed straight. *Should be pretreated chemically and metal surface should then be coated with epoxy polyester powder with paint film thickness of 60 microns (minimum) and oven baked at deg. C. *Over all approx size: 200 cms L x 50 cms W x 60 cms H. *Body constructed of frame work of 40mm x 20mm x 16 G ERW rectangular tubes. *In one half of the Bench, there should be a cabinet box constructed of single sheet of 20 G CRCA sheet on 3 sides & bottom. *The Cabinet box should be well supported from underneath. * Door of the cabinet box should be provided with Stainless steel handle and should be pivoted at top and bottom and should be provided with latch. *Top of the Bed-side bench should be fitted with high quality cushion seat of 70 mm thickness and covered with Rexene. *Should be pretreated chemically and metal surface should then be coated with epoxy polyester powder with paint film thickness of 60 microns (minimum) and oven baked at deg. C. *Bedside Screen Three Fold with curtain. *It should be fitted with six swivel, twin wheel non-rusting castors, and 50 mm diameter with M.S body frame. *Overall approx. size: 1680mmH X 2450mmW. Middle span 1210mm wide. Side spans 610mm wide each with hooks, springs and curtains. *Overall Size: 480mm To 670mm H. *Tubular 4 legged base of 25.4 x 14 g Stainless Steel tube. *all 4 legs must be strongly joined together at bottom by a solid ring of SS. * Top made of Stainless Steel (300mm) having Height adjustment by screw mechanism. Screw should not protrude from the central screw housing. *The legs fitted with high quality PVC shoes with nylon reinforcement. *Overall size: 1890 mm L x 560mm W x 840mm H. (Approx) *Fixed upholstered top 64mm thick in two sections covered with Rexene. *Body frame work made from 20G. CRCA sheet and 20 mm x 40mm x 16 G MS. Rectangular Tubes. *Headrest adjustable on gas spring. *Upper section of box size 1220 mm L x 460 mm W x 630 mm H (Approx) with 3 smoothly sliding drawers of size 320 mm L x 430 mm W x 75 mm H. *Lower section comprises of three cabinets of inside size 350mm L x 440 W mm x 430 H mm (Approx) with separate doors and SS handles

4 10 Table over-bed/ (Cardiac table) 11 Trolley for dressing SS 12 Trolley for instruments SS 13 Trolley for Soiled linen with Canvas Bag 14 2/ 3 Stage Foot step *B.P. apparatus tray made of 18 G MS sheet of size 350 mm L x 120 mm W X 20 mm H provided on a swinging rod rotating through a bush welded on the body of the couch. *Should have Sliding Inbuilt Step Stool. *Approximate Size: Top 810mm L x 350mm W. *Laminated top should be fitted on mild steel square tubular telescopic stem with geared, handle for height adjustment from 760mm to 1050mm. *Base frame should be of mild steel rectangular tubular base frame mounted on four good quality castors of 50mm dia. *Overall Size: 1010 mm L x 510 mm W x 900mm H welded stainless steel tubular frame work. *Vertical member of 31.7mm OD x 18 G tube; horizontal stays of 19 mm OD x 18 G tube on all four sides to support two stainless steel shelves 22 G over with 10 mm dia stainless steel railings are provided on all four sides. *The shelves should be of 18G SS Sheet. *The trolley holds stainless steel bucket with Stainless Steel lid at lower level and S.S. bowl at top level respectively. *Only 304 grade stainless steel should be used for tubular frame work & Stainless Steel shelves of trolley. *The trolley should be in buff finish with 100 mm dia non rusting swivel castors wheels with brakes on two wheels. *Overall Size: 680 mm L x 510 mm W x 800mm H welded stainless steel tubular frame work. *Vertical member of 31.7mm OD x 18 G tube; horizontal stays of 19 mm OD x 18 G tube on all four sides to support two stainless steel shelves 18 G over with 10 mm dia stainless steel railings are provided on all four sides. *Vertical members mounted on 100 mm diameter Non-rusting swiveling castor wheels two with brakes, two without brakes. *Top stainless steel shelves with protective railings on three sides. *Overall size: 910mm H x 510mm dia. SS tubular framework fitted with three swivel castors, 100mm dia. *Framework made of 25.4mm dia x 18G verticals, upper ring made of 19mm dia x 18G tube and support stays of 19 mm dia. X 18G stainless steel tubes. *Should be supplied with canvas bag. *All SS components should be of 304 quality. *Overall Step size 505mm L x 305mm W. First step height 230 mm. & second step size 450 mm. *Step made of 18G CRCA sheet. Welded on MS. tubular frame of 25.4mm X 18G fitted with aluminum tread flats of size: 500 mm L, 32 mm W, 3.4 mm thick, fitted by aluminum pop rivet

5 15 Stretcher trolley SS 16 Crash cart for ICU/ wards 17 Medicine trolley. 18 Cabinet For instruments *Legs fitted with PVC Shoe with nylon reinforcement. *Overall dimensions 2030mmx 560mmW x 810H mm. *Frame work made of 31mm OD x 1.60 mm vertical & 25 mm x 1.22 mm horizontal Stainless Steel tubes. *Vertical members should be joined together by transverse members at upper & lower end both. *Trolley mounted on 150 mm diameter castors 2 with brakes *Removable stretcher top made of 1.22 mm aluminum sheet with S.S. handle at both ends with 50 mm thick suitable Coir/ foam Mattress covered with good quality Rexene. It should have straps for fixing. *It should have facility/ place for fixing B Type Oxygen Cylinder. * The trolley should have one telescopic SS IV rod & place for fitting IV rod at both ends. *Size shall be approximately 900mm L x500mm W x 1500mm H. *The crash cart should be made of 25.4mmx18G Stainless steel tubular frame work. *Should have dual push handles on either side Should have S.S. shelves, six colored removable bins & two polystyrene lockable storage units with three drawers each. *Facility to carry ECG Monitors, Defibrillators etc on open areas at top centre and bottom shelves. *It Should have Stainless steel saline rod fixed with. *Two accessory mounting brackets to mount accessories anywhere without the need of pre-threaded holes. *Crash cart should be mounted on 12.5 cms dia non-rusting swiveling castor wheels with two having locking arrangement. Should have Oxygen cylinder stand/ cage in lower part, made of SS frame. *Frame work made from SS steel material. All stainless steel should 304grade/ 16 G. *Flat top of SS and at least 6 inch deep removable bucket at bottom. *Should have multiple long drawers to hold drug strips made of high quality epoxy plastic or steel material with convenient and smooth slide in and slide out motion(at least separate drawers in about six to eight row) *The front of the each drawer should be half covered on which removable Medicine label can be pasted and upper half open to see content inside. *Approx size 750(L) x 450(W) x850(h) mm. *should be fitted with good quality swivel noiseless castor wheels of 100 mm dia fitted with brakes. *Equipped with Waste bin, needle disposable container, file cassette & guard rails Equipped with lock key system Swivel noiseless caster with brakes 10 cm diameter *Frame work constructed with Heavy Duty MS Steel sheet & Angle * Overall size approximate 1800 LX1050 W x 450 D(mm) *Two glass doors with individual latch handles & key locking facility

6 19 Gynae Examination Table 20 Fracture Table SS 21 Food Trolley SS *Should have Three adjustable glass shelves of minimum 8 mm thickness. *should have One bottom cabinet with CRCA Sheet door & locking facility *Overall size: 1890 mm L x 600mm W x 840mm H. Complete Stainless Steel Construction of the Framework as well as the legs. *Fixed upholstered top Approx 75 mm thick in two sections. *Top of the Body made from 18G. Stainless Steel sheet and frame work made up of 20 mm x 40mm x 16 G Stainless Steel Tube. *Lower end of the couch should have a semicircular U shaped recess for pelvic examination of females. *Headrest adjustable on gas spring. *Retractable Basin under the leg end of table top for waste material. *The overall construction of the table should be of 304 Gr Stainless Steel framework & SS top. *Fracture table on Watson Jones design with padded back rest, adjustable height, distance, radiolucent pelvic post with counter traction rod of small, medium and large sizes for patients of different ages. *And lower limb 2 traction rods with adjustable traction and distance mechanism for both lower limbs with foot pads,padded of 3 sizes, (small, medium and large) and straps. *Alternate arrangement of shoes to be given. *Foot traction rods should be lockable at various distances of abduction and should permit adduction also. The table should be washable and rust and corrosion free. *Should be made of Stainless steel. *Should have cabinet with sliding door for placing things in the underside of trolley. *Should have a food warming chamber in the upper part with at least 4 recesses for fitting utensils. *Should be fitted with four 6 diameter castor wheels having ball bearing in the centre & PVC/ Non-Staining Rubber cover for noise reduction. The rear wheels should be fixed while the front wheels should be steerable with the help of a pulling handle cum steerable rod. *There should be a handle for pushing the trolley on fixed wheel side. 22 Eclampsia bed *Overall size 2180mm L x 1000mm W x 600mm H. The main frame should be made from 60mm x 30mm x 16 G ERW rectangular tubes. *Four sections top should be made from uniformly perforated 18 G C.R.C.A. sheets and should be suitably fitted to the main frame. *Back-rest and knee rest should be maneuvered by the screw mechanism with one common handle. *Detachable Head and Leg Bows: Should be made from stainless steel 31.7mm dia x 18 G tube with laminated panels of approx. size 810mm L X 140mm wide X 14mm thick on stainless steel bracket. The panels should be cushioned for safety

7 23 Sample collection chair (lab) 24 Goods carriage trolley 25 Blood bank chair cum bed (Donor Couch) *The base frame should be fitted with non rusting swivel castor wheels of 125mm dia, 2 with brake, 2 without brakes castors housing and wheels made from high grade non floor staining synthetic materials with integrated thread guards, wheel centre having precision ball bearing to run smoothly. *The bows should be mounted to the bed frame on welded brackets in such a way that bolt or nut should not appear on top surface of the bed frame. Four IV Rod Locations. *A mattress suitable for the bed made of 25mm thick soft 32 density top layer and 75mm thick high 40 density bottom layer for the patient comfort and better pressure care. The upper part of cover of the mattress is made of waterproof, breathable fabric separated by zip on three sides with lower cover part made of Rexene. *The sides should be fitted with Collapsible railing made of PU material. *Finishing: Steel welding wherever required is be done by either by using MIG welding or Spot Welding process to minimize distortion. *All mild steel components should be pretreated chemically and metal. *All Stainless Steel PARTS used should be of 304 grade *Bed should be supplied with following accessories. Bedside rails, removable type and Stainless steel Telescopic IV Rod. *Should have fixed height & fixed stand, Overall 30 H x 24 W. *Should have comfortable upholstery with density foam seat & back. *Should have height adjustable cushioned Armrests/ splint for sample collection. *Should be made of MS tubular framework. *Should be made of a heavy duty MS tubular framework. *The platform for carriage should be made of 16G CRCA sheet supported underneath by a 1.5 angle iron framework. *Approximate size should be 48 L x 36 w x 12 H *Should be fitted with four 6 diameter wheels having ball bearing in the centre & PVC/ Non-Staining Rubber cover for noise reduction. The rear wheels should be fixed while the front wheels should be steerable with the help of a pulling handle cum steerable rod. *Rear end of the Trolley should have handle for pushing. *should carry a warranty of minimum 3 years. *Should have an overall size of approximately 100X55X120 cm(close) and 175X55X50 cm (Open) *Stainless Steel Framework. *Simultaneous movement of back & leg rest. *Should have height adjustable padded armrests. 26 Shoe Rack *Should be made of MS angle framework mounted on good quality castor wheels of 100mm diameter. *Should have 3 shelves for keeping the shoes. *Overall size should be 48 L x 30 H x 112 D

8 *Shelves should be made of 20G CRCA Sheet.