LACONT Umwelttechnik GmbH

Transcription

1

2 Expert of hazardous substances 2013/ brand quality made by LACONT Dear Sir or Madam, dear business partner, dear LaCont customer, Our basis for your safety: As one of the leading European manufacturers LACONT provides a full service in the field of hazardous substances storage technology. From sump trays to safety cabinets and containers for outdoor use, we produce a wide range of standard products at our company site, located in Egeln. But also special orders and project solutions specially fitted to your needs are our daily business. Please note when purchasing your safety products that our brands + are synonymous for high quality product ranges in compliance with law and environmental storage technology. Convince yourself of our innovative product diversity at 238 pages in our new and most extensive main catalog Expert of hazardous substances 2013/2014. Certified specialist according to WHG 19 Monitoring contract with TÜV-Nord Manufacturer qualification Class C General Technical Approval DIBt Berlin Certificates in accordance with steel trough guidelines Fire chamber tests and test reports according to EN and EN LACONT Umwelttechnik GmbH Halberstädter Straße 20a Egeln / GERMANY Phone / Fax / info@lacont.de Internet:

3 HIGHLIGHTS - HIGHLIGHTS - HIGHLIGHTS - HIGHLIGHTS - The Expert of Hazardous Substances 2013/2014 provides the user with the optimum for every purpose and compliant storage solution. The proven range of safety, environmental and storage technology has been extended by a number of new developments. Needs and suggestions of our customers have been implemented into practice-oriented products. Take a look at the following HIGHLIGHTS: Highlight 1 è PE sumps... page Approval-No.: Z General Technical Approval DIBt Berlin Highlight 2 è Safety- and hazardous substances cabinets... page Highlight 3 è Fire protection container F-90 steel... page Approval-No.: Z General Technical Approval DIBt Berlin Highlight 4 è Fire protection container F-90 concrete... page Approval-No.: Z General Technical Approval DIBt Berlin Highlight 5 è Fire fighting technology... page

4 PRACTICAL INFORMATION 1 Globally harmonized system (GHS) page 5 CLP regulation (EG) No. 1272/ GHS-hazard class - old and new symbols page 6/7 2 Checklist for Your hazardous substance storage page 10 3 Legal basis page 52 4 Storage of flammable liquids page 76 5 Operation of safety cabinets page 108/109 6 Storage of pressurized gas cylinders page Comparison VbF / BetrSichV page Ventilation of hazardous substances storage page Gas cylinder storage regulations page TRGS Overviews of clastering page 202 Symbol keys (explanations): Bearing constitution and storability: Indoor storage Outdoor storage Indoor or outdoor storage Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems Approval-No.: Z General Technical Approval suitable *) limited suitability *) DIBt Berlin DIBt Berlin Galvanized version Ü-sign for steel sump pallets General technical approval unsuitable EN EN *) Please observe the current legal requirements, materials safety data sheets and consult the previously mentioned practical information. Fire chamber test as per EN Fire chamber test as per EN

5 GHS - PRACTICAL INFORMATION PRACTICAL INFORMATION 1 Globally harmonized system (GHS) in the EU the new classification and labeling in accordance with CLP regulation (EG) No. 1272/2008 Implementation deadlines: Became valid on January 20, It regulates classification, labeling and packaging of substances and mixtures (>Regulation on classification, labeling and packaging of substances and mixtures<, short >CLP<) and replaces the European guideline of substances 67/548/EWG as well as preparation directive 1999/45/EG beginning in This will create a globally uniform regulation. (!) safety data sheet past classification new classification substances mandatory by Jun/01/2015 allowed from Jan/20/2009 necessarily only Dec/01/2010 mixtures mandatory by Jun/01/2015 allowed from Jan/20/2009 necessarily only Jun/01/2015 labeling (label) past labeling new labeling substances allowed to Dec/01/2010 allowed from Jan/20/2009 (stock of inventory + 2 years) necessarily only Dec/01/2010 mixtures allowed from Jun/01/2015 allowed from Jan/20/2009 (stock of inventory + 2 years) necessarily only Jun/01/2015 What is going to change? Substances must be labeled in accordance with CLP from December 1, 2010 and mixtures from June 1, but now it is permitted as well. During the transitional periods please note that only one labeling is to be made on the label - in accordance with the past or new regulation. Concerning the safety data sheet the past classification has to be indicated until June 1, 2015 in accordance with the guidelines 67/548/ EWG and 1999/45/EG. By using long-lasting transitional periods of the labeling systems ( ) one wants to make sure that all the persons concerned (authorities, companies, stakeholders) are able to adjust in time to any new situations. This new European CLP regulation is based on previous systems for classification and labeling. Changes result from a compromise between the established systems of North America and the European Union. Innovations arise already at a first glance by changing the labeling signs (up to now: signs for hazardous substances with black overprint on orangeyellow rectangles - new: nine hazard pictograms with black signs on white background in red-rimmed rhombus). Most of the new hazard pictograms are in accordance with the well-known hazard symbols, but pictograms such as GHS 04, GHS 07 and GHS 08 are absolutely new. Previous diagonal cross (Xn/Xi) will be deleted without substitution. GHS 01 GHS 02 GHS 03 GHS 04 GHS 05 GHS 06 GHS 07 GHS 08 GHS 09 exploding flame flame gas cylinder caustic effect death s exclamation health environment bomb over circle head point hazard The previous descriptions for hazard (for instance toxic, harmful), assigned to hazard symbols, will now be replaced by signal words such as danger or attention. R- and S-clauses will be substituted by H- and P-hints (hazard and precautionary statements). Setup of H- and P-clauses Regulation on hazardous substances (GefStoffV) new 2010! While the previous R- and S-clauses have been subjected to no particular system, the new hazard (H) and precautionary notes (P) are classified. H 3 01 serial number classification 2 = physical hazards 3 = health risk 4 = ecological menace stands for hazard note (Hazard Statement) According to the new regulation on hazardous substances 2010 a nearterm adapting to CLP- and REACH-regulation has succeeded. The new regulation on hazardous substances is absolutely hazard-minded. The determination of precautionary measures is exclusively a result of a risk assessment. This can be easily derived from the following chart: Hazardous substances Task P 1 2 serial number classification 1 = general remarks 2 = prevention 3 = response 4 = storage 5 = disposal Hazard Measures stands for precautionary note (Precautionary Statement) 5

6 GHS - PRACTICAL INFORMATION BY COMPARISON: HAZARD SYMBOLS OLD (EU) AND NEW (GHS) 1 Hazard symbols OLD GHS-hazard class and categories 2 Hazard pictograms NEW 3 EXPLOSIVE (R2, R3) Explosive substances/mixtures unstable, explosive explosive, cat Self-reactive substances and mixtures, types A, B Organic peroxides, types A, B DANGER H200 H201, H202, H203 H240, H241 H240, H241 PHYSICAL HAZARDS EASILY- HIGHLY- FLAMMABLE FLAMMABLE HIGHLY- EASILY- FLAMMABLE SUPPORTING COMBUSTION SUPPORTING COMBUSTION No symbol No labeling (flash point C) No Explosive, cat. 1.4 H204 labeling (R12) Flammable gases, cat. 1 H220 (R12) Flammable aerosols, cat. 1 H222 R12 Flammable liquids, cat. 1 H224 R11 Flammable liquids, cat. 2 H225 (R11) Flammable solids, cat. 1 H228 (R11) Flammable solids, cat. 2 H228 (R10) Flammable aerosols, cat. 2 H223 R10 Flammable liquids, cat. 3 H226 R17 Pyrophoric liquids, cat. 1 H250 R17 Pyrophoric solids, cat. 1 H250 (R15) Substances and mixtures which emit flammable H260 (R15) gases upon contact with water, cat. 1, 2 H261 (R15) and cat. 3 H261 R12 Self-reactive substances and mixtures, type B H241 R12 Self-reactive substances and mixtures, types C, D H242 and types E, F H242 Self-heating substances and mixtures, cat. 1 H251 and cat. 2 H252 R7 R7 Organic peroxides, type B H241 Organic peroxides, types C, D H242 Organic peroxides, types E, F H242 R8 Oxidizing gases, cat. 1 H270 R8, R9 Oxidizing liquids, cat. 1, 2 H271, H272 and cat. 3 H272 R8, R9 Oxidizing solids, cat. 1, 2 H271, H272 and cat. 3 H272 No Gases under pressure labeling solidified gases H280 liquefied gases H280 deep-frozen liquefied gases H281 dissolved gases H280 No Substances and mixtures labeling corrosive to metals, cat. 1 H290 ATTENTION ATTENTION ATTENTION DANGER ATTENTION DANGER ATTENTION ATTENTION DANGER ATTENTION 1 Comparison of risk characteristics (allocation) according to labeling elements, symbol (EU old) and pictogram (GHS). 6

7 GHS - PRACTICAL INFORMATION BY COMPARISON: HAZARD SYMBOLS OLD (EU) AND NEW (GHS) 1 Hazard symbols OLD GHS-hazard class and categories 2 Hazard pictograms NEW 3 VERY TOXIC TOXIC Acute toxicity, cat. 1, 2 R28 oral H300 R27 dermal H310 R26 inhalative H330 Acute toxicity, cat. 3 R25 oral H301 R24 dermal H311 R23 inhalative H331 DANGER HARMFUL TO HEALTH HAZARDOUS TO THE ENVIRONMENT TOXIC IRRITANT IRRITANT CAUSTIC HARMFUL TO HEALTH HAZARDOUS TO THE ENVIRONMENT No symbol R46 Germ cell mutagenicity, cat. 1A, 1B H340 R45, R49 Carcinogenic effect, cat. 1A, 1B H350 R60, R61 Toxic to reproduction effect, cat. 1A, 1B H360 R39 Specific target organ toxicity with single exposition, cat. 1 H370 R48 Specific target organ toxicity with repeated exposition, cat. 1 H372 R42 Sensitization of the respiratory passages, cat. 1 H334 R65 Danger of aspiration, cat. 1 H304 R68 Germ cell mutagenicity, cat. 2 H341 R40 Carcinogenic effect, cat. 2 H351 R62, R63 Toxic to reproduction effect, cat. 2 H361 R68 Specific target organ toxicity with single exposition, cat. 2 H371 R48 Specific target organ toxicity with repeated exposition, cat. 2 H373 Acute toxicity, cat. 4 R22 oral H302 R21 dermal H312 R22 inhalative H332 R34, R35 Caustic effect for the skin, cat. 1A, 1B, 1C H314 R41 Severe eye damage, cat. 1 H318 R38 Skin-irritant, cat. 2 H315 R36 Eye-irritant, cat. 2 H319 R43 Sensitization of the skin, cat. 1 H317 Specific target organ toxicity with single exposition, cat. 3 R37 irritant for respiratory passages H335 R67 narcotic effekt H336 R50 Acute hazard for waters, cat.1 H400 R50/53 Chronic hazard for waters, cat. 1 H410 R51/53 Chronic hazard for waters, cat. 2 H411 DANGER _ ATTENTION ATTENTION DANGER ATTENTION ATTENTION 2 2source: annex I of the regulation (EG) no. 1272/ source: annex VII of the regulation (EG) no. 1272/

8 LACONT - MANUFACTURING LACONT is a specialized company according to the Water Management Act (WHG), has a monitoring contract with TÜV Nord as well as manufacturer s qualification Class C. Therefore, LACONT is entitled to develop and manufacture plants for the storage of water-endangering and flammable liquids. Development Review and approval Manufacturing Delivery / Assembly Storage for hazardous substances in compliance with the law 8

9 TABLE OF CONTENTS Sump systems... made from steel... from page 11 made from PE... from page 29 Shelving systems for hazardous substances from page 53 Cabinets for hazardous substances from page 77 Outdoor storage systems / Projects from page 149 Fire protection container systems from page 181 Gas cylinder storage systems from page 191 Safety and container technology from page 203 Fire fighting technology from page 225 9

10 CHECKLIST FOR YOUR HAZARDOUS SUBSTANCES STORAGE PRACTICAL INFORMATION 2 The planning and realization of hazardous substances storage requires the reconcilement of countless individual aspects. For example type and quantity of stored hazardous substances, local conditions and available space, the legal regulations and official requirements, and not at least the available budget has to be brought to a common denominator. Our checklist is intended to help you with this. Please note that we are only able to render assistance at this. Each case must be considered separately. If you want to play safe, then contact us by phone. We are pleased to assist you gladly (even locally). Checklist for storage of water-endangering and/or flammable liquids Clear classification of the substances be stored Water-endangering liquids / flammable liquids (flammable substances) Resistance of the trays material (e.g. storage of aggressive media) Type of containers (small containers, 200 liter drums, IBC ) Quantity of containers Sump capacity Walk-in or shelving storage Available or planned handling equipment Water protection area Official requirements Water-endangering liquids Flammable liquids (flammable substances) Site F90-system, F90-wall or at least 10 meters distance Ventilation Ex-proof electrical equipment Official and/or fire fighting requirements Fire protection requirements (fighting system, fire detection, fire fighting water retention...) Please let us know about used container sizes, pallet sizes, required load capacity or compartment height. This might be helpful to submit an offer. 10

11 TABLE OF CONTENTS - STEEL SUMPS 1.1. Steel sumps... Our steel sumps are available in our standard color RAL sky blue (if not specified separately) Sumps for small containers and for 60 liter drums page Compact sump pallets page Drum carts page 16 Steel drum cabinets page 17 Stackable water protection sump pallets page 18 Enclosed water protection sump pallets page 19 Floor safety elements / Modular surface protection system page KTC sump pallets page Large-volume sump pallets / Custom-made versions.. page Stainless steel sump pallets page 28 11

12 STEEL SUMPS SUMP TRAYS FOR SMALL CONTAINERS For the storage of water-endangering and flammable liquids in small containers Made from 3 mm galvanized sheet steel For placing flat on the floor PE inserts are available for all models for the storage of acids and alkalis PE sump trays for the storage of small containers can be found on page 31! KGW 30, Article No. P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin KGW 35, Article No. P A Special sump tray KGW 80, Article No. P A Model KGW 20 KGW 30 KGW 35 KGW 40 KGW 80 External dimensions W x D x H (mm) 500 x 500 x x 596 x x 596 x x 500 x x 1000 x 123 Sump capacity (l) Weight (kg) Article No., galvanized P A P A P A P A P A Accessory PE insert for storage of aggressive media Article No. P A R A R A P A P A 12

13 STEEL SUMPS SUMP PALLETS FOR 60 LITER DRUMS For the storage of water-endangering and flammable liquids in containers and drums up to 60 liter Made from 3 mm sheet steel Removable galvanized grid Ground clearance 100 mm for internal transport Corrosion protection by primer coating and painting or by fire-galvanized sheet steel PE inserts are available for all models for the storage of acids and alkalis CW 60-6, Article No. P A CW 60-2, Article No. P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CW 60-4, Article No. P A PE drum stands can be found on page 41! CW 60-2, Article No. P A, with optional PE drum stand Model CW 60-2 CW 60-4 CW 60-6 Capacity, 60 liter drums External dimensions W x D x H (mm) 820 x 500 x x 820 x x 820 x 190 Sump capacity (l) Max. load (kg) Weight (kg) Article No., painted P A P A P A Article No., galvanized P A P A P A Accessory PE insert for the storage of aggressive media Article No. P A P A P A CW 60-4, Article No. P A, with optional PE drum stand 13

14 STEEL SUMPS COMPACT SUMP PALLETS CW 1, Article No. P A CW 2, Article No. P A CW 2, fire-galvanized, Art. No. P A, with optional drum stand Model CW 1 CW 2 CW 3 CW 4 CW 4L CW 8 Capacity, 200 liter drums External dimensions W x D x H (mm) 810 x 820 x x 820 x x 820 x x 1320 x x 820 x x 1220 x 210 Sump capacity (l) Max. load (kg) Weight (kg) Article No., painted P A P A P A P A P A P A Article No., fire-galvanized P A P A P A P A P A P A Accessory PE insert for the storage of aggressive media Article No. P A P A P A P A P A P A For the storage of water-endangering and flammable liquids Made from 3 mm sheet steel Removable galvanized grid Ground clearance 100 mm for internal transport Corrosion protection by primer coating and painting or by fire-galvanized sheet steel PE inserts are available for all models for the storage of acids and alkalis Stainless steel sump pallets can be found on page 28! Building Regulations List A, Part 1 Suitable drum stands can be found on page 15! steel troughs guidelines TüV-Nord systems DIBt Berlin CW 4L, fire-galvanized, Article No. P A CW 4, fire-galvanized, Article No. P A 14

15 STEEL SUMPS COMPACT SUMP PALLETS CW 8, Article No. P A CW 4, Article No. P A, with optional drum stand PALLET SUMPS Made from 3 mm sheet steel For placing on euro- or chemical pallets In combination with drum stand also suitable for horizontal storage Available with and without grid support * maximum capacity when used with galvanized grid EW 2, with grid, Art. No. P A EW 2, without grid, Art. No. P A Model EW 2 (for euro-pallets) EW 4 (for chemical pallets) Version without grid with grid without grid with grid Dimensions W x D x H (mm) 1250 x 820 x x 820 x x 1220 x x 1220 x 210 Sump capacity (l) Capacity, vertical drums* 2 drums 2 drums 4 drums 4 drums Weight (kg) Art. No., painted P A P A P A P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Art. No., fire-galvanized P A P A P A P A DRUM STANDS Drum stands with fixed drum supports for 60 liter up to 200 liter drums, completely galvanized. Tilted support onwards for easy drum emptying. Drum stands can be combined with: Compact sump pallets Water protection pallets Hazardous substance stations Floor safety elements Drum carts FB 1, Art. No. P A FB 2, Art. No. P A Model FB 1 FB 2 FB 3 Capacity 1 x 200 liter drum 2 x 200 liter drum 3 x 60 liter drum External dimensions W x D x H (mm) 600 x 650 x x 650 x x 650 x 415 Article No., fire-galvanized P A P A P A Article No., fire-galvanized, with roller support P A P A P A FB 3, Art. No. P A 15

16 STEEL SUMPS DRUM CARTS For the transport of water-endangering and flammable liquids Made from 3 mm sheet steel Removable galvanized grid Corrosion protection by primer coating and painting or by fire-galvanization WSP-1OS/W and WSP-2OS/W equipped with 2 fixed and 2 swiveling castors and push bar as standard Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSP-2OS/W, fire-galvanized, Art. No. P A, with opt. drum stand Suitable drum stands can be found on page 15! WSP-1OS/W, Art. No. P A, with optional tension belt PE drum carts can be found on page 42/43! WSP-2OS/W, Art. No. P A Model WSP-1 OS/W WSP-2 OS/W External dimensions L x W (mm) 800 x x 1400 Height (without push bar) (mm) Sump capacity (l) Capacity, 200 liter drums (vertical) 1 2 Article No., painted P A P A Article No., fire-galvanized P A P A Rotating drum support, Article No. Z A Accessories Tension belt Rotating drum support Article No. Z A Z A 16

17 STEEL SUMPS STEEL DRUM CABINETS For the storage of water-endangering liquids Made from 3 mm sheet steel Ground clearance 100 mm for internal transport Lockable versions also suitable for storage outdoors Sump capacity 220 liter Corrosion protection by primer coating and painting of sump pallet Weather-proof superstructure made from galvanized sheet steel WSP-2SKKS-D, Article No. P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSP-1SKKS-D, Article No. P A WSP-1SKKS-D/GR, Article No. P A WSP-2SKKS-D/GR, Article No. P A Model WSP-1SKKS-D WSP-2SKKS-D WSP-1SKKS-D/GR WSP-2SKKS-D/GR Capacity, 200 liter drums External dimensions W x D (mm) 900 x x x x 750 Total height (mm) Internal dimensions W x D (mm) 740 x x 740 x x x 740 x 660 Compartment height (mm) x x 400 Max. load (kg) Sump capacity (l) Article No., painted sump pallet, galvanized superstructure P A P A P A P A 17

18 STEEL SUMPS STACKABLE WATER PROTECTION SUMP PALLETS WSP-2STS, Art. No. P A, with optional safety chain WSP-2SKS, Art. No. P A, with optional safety chain WSP-2SSS, Art. No. P A, with optional tension belt Model WSP-1STS WSP-2STS WSP-4STS WSP-1SKS WSP-2SKS WSP-4SKS Capacity, 200 liter drums External dimensions W x D (mm) 870 x x x x x x 1290 Total height (mm) Internal dimensions W x D (mm) 780 x x x x x x 1200 Compartment height (mm) Max. load (kg) Sump capacity (l) Article No., painted P A P A P A P A P A P A Article No., fire-galvanized P A P A P A P A P A P A Ground clearance 100 mm for internal transport Sump capacity 220 liter Stable construction from 3 mm sheet steel Space-savings as models WSP-STS and SKS can be double-stacked Corrosion protection by primer coating and painting or fire-galvanization Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 2SKS / Gitt, Article No. P A Model WSP-2SSS WSP-2SKS/Gitt WSP-4SKS/Gitt Capacity, 200 liter drums External dimensions W x D (mm) 1410 x x x 1290 Total height (mm) Internal dimensions W x D (mm) 1320 x x x 1200 Compartment height (mm) Max. load (kg) Sump capacity (l) Article No., painted P A P A P A Article No., fire-galvanized P A P A P A Accessories Tension belt Safety chain Article No. Z A P A WSP-2STS, fire-galvanized, Art. No. P A, stackable, with optional safety chains 18

19 STEEL SUMPS F or the storage of water-endangering and flammable liquids ENCLOSED WATER PROTECTION SUMP PALLETS Stable construction from 3 mm sheet steel Ground clearance 100 mm for internal transport Lockable versions also suitable for storage outdoors Sump capacity 220 liter Corrosion protection by primer coating and painting or fire-galvanization Version NB with natural ventilation for passive storage of flammable liquids WSP-2SKKS, Article No. P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Special version of water protection pallet WSP-2SKKS, Article No. P A WSP-2SKKS, Article No. P A Approved for water-endangering substances for flammable liquids Model WSP-2SKKS WSP-4SKKS WSP-2SKKS/NB WSP-4SKKS/NB Capacity, 200 liter drums External dimensions W x D (mm) 1410 x x x x 1290 Total height (mm) Internal dimensions W x D (mm) 1320 x x x x 1200 Compartment height (mm) Max. load (kg) Sump capacity (l) Article No., painted P A P A P A P A Article No., fire-galvanized P A P A P A P A 19

20 STEEL SUMPS FLOOR SAFETY ELEMENTS 55 Water-endangering and flammable liquids are subject to strict safety regulations, not only for storage but also for daily routine procedures such as filling off, handling and transport. According to the regulations even empty containers must be stored by means of sump trays. This means that favourably priced solutions are required in accordance with the regulations. Floor safety elements are available for such cases. Range of applications: Empty container stores Laying of transport paths Revision of transformers Protection against splashes and leaks Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Compliance with all requirements of the Water Management Act (WHG) Approved for water-endangering and flammable liquids Made from 3 mm sheet steel Individual segments can be combined at will Distance between elements: 40 mm throughout With removable heavy-duty fire-galvanized grids Can be driven over by pallet trucks, on request by fork-lift trucks or road vehicles Galvanized for high corrosion protection Model BS / 55 BS / 55 BS / 55 BS / 55 Base area W x D (mm) 1350 x x x x 1900 Element height (mm) Sump capacity (l) Wheel load (kg) Max. load (kg/m 2 ) Weight (kg) Article No., galvanized P B P B P B P B Accessories Drive-on ramps Drive-on corner Type AF 13 / 55 AF 14 / 55 AF 19 / 55 AF 29 / 55 AE 55 Base area W x D (mm) 1350 x x x x x 550 Wheel load (kg) Weight (kg) Article No., galvanized P A P A P A P A P A Accessories Element connectors Type VB 13 VB 14 VB 19 VB 29 Dimensions W x D (mm) 52 x x x x 2820 Article No., galvanized P A P A P A P A Other sizes available on request! Element connector Cross connector Drive-on ramp Accessories Edge clips and cross connectors Type RK 55 KK 55 Dimensions W x D (mm) 100 x x 120 Article No., galvanized P A P A Edge clip Drive-on corner 20

21 STEEL SUMPS FLOOR SAFETY ELEMENTS 78 Particularly suitable for equipping individual rooms. Custom-made versions available! Drum pallet, filling height 230 mm, W x D x H (mm) = 1280 x 755 x 280, Article No. R A Model BS / 78 BS / 78 BS / 78 BS / 78 Base area W x D (mm) 1350 x x x x 1900 Element height (mm) Sump capacity (l) Wheel load (kg) Max. load (kg/m 2 ) Weight (kg) Article No., galvanized P B P B P B P B Accessories Drive-on ramps Drive-on corner Type AF 13 / 78 AF 14 / 78 AF 19 / 78 AF 29 / 78 AE 78 Base area W x D (mm) 1350 x x x x x 745 Wheel load (kg) Weight (kg) Article No., galvanized P A P A P A P A P A Accessories Element connectors Type VB 13 VB 14 VB 19 VB 29 Dimensions W x D (mm) 52 x x x x 2820 Article No., galvanized P A P A P A P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems Accessories Edge clips and cross connectors Type RK 78 KK 78 DIBt Berlin Dimensions W x D (mm) 100 x x 120 Article No., galvanized P A P A 21

22 STEEL SUMPS FLOOR SAFETY ELEMENTS 123 For the storage of water-endangering and flammable liquids Made from 3 mm sheet steel Individual segments can be combined at will With removable heavy-duty fire-galvanized grids Galvanized for high corrosion protection Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Model BS / 123 BS / 123 BS / 123 BS / 123 BS / 123 BS / 123 BS / 123 Base area W x D (mm) 500 x x x x x x x 1000 Element height (mm) Sump capacity (l) Wheel load (kg) Max. load (kg/m 2 ) Weight (kg) Article No., galvanized P B P B P B P B P B P B P B Drum pallet, filling height 230 mm, W x D x H (mm) = 1280 x 755 x 280, Art. No. R A Accessories Drive-on ramps Drive-on corner Type AF 05 / 123 AF 10 / 123 AF 20 / 123 AF 25 / 123 AE 123 Base area W x D (mm) 450 x x x x x 1150 Wheel load (kg) Weight (kg) Article No., galvanized P B P B P B P C P B Accessories Element connectors Type VB 047 VB 097 VB 20 VB 25 Dimensions W x D (mm) 52 x x x x 2470 Article No., galvanized P B P B P B P B Accessories Edge clips and cross connectors Type RK 123 KK 123 Dimensions W x D (mm) 100 x x 120 Article No., galvanized P B P B 22

23 STEEL SUMPS MODULAR SURFACE PROTECTION SYSTEM Suitable for use as mobile filling, transferring and / or tanking area with Ü-Sign Stable surface protection element 5/7 mm tear-drop flooring, with primer Welded leak-proof, with specific test report Suitable for vehicles with a wheel load up to 3 tons Can be extended/retrofitted at will Other sizes and sump capacities available on request Supplied as individual modules for laying down quickly and easily ---> READY FOR IMMEDIATE USE Floor anchors are not required as the elements are firmly laid by their own weight Model Basic element FSS-M1 Extension panel FSS-M2 Base area W x D (mm) 2920 x x 2260 System height (mm) Sump capacity (l) Weight (kg) Article No., painted P A P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Modular surface protection system in use as basis for waste transhipment center 23

24 STEEL SUMPS KTC SUMP PALLETS For storing and filling off hazardous substances from large containers Made from 3 mm sheet steel Support surface is a removable fire-galvanized grid Ground clearance 100 mm for fork-lift truck transport High corrosion resistance - with primer and painting or fire galvanized WSP-KTC-OS, fire-galvanized, Article No. P B WSP-KTC-ZW, Article No. P B Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSP-KTC-SSS, Article No. P A All sump pallets can also be supplied with PE-inserts! WSP-KTC-DR, fire-galvanized, Article No. P A Model WSP-KTC-OS WSP-KTC-ZW WSP-KTC-DR WSP-KTC-SSS Dimensions W x D x H (mm) 1300 x 1360 x x 1300 x x 1300 x x 1360 x 2245 Sump capacity (l) Article No., painted P B P B P A P A Article No., fire-galvanized P B P B P A P A Accessory Acid-resistant PE-insert Article No. P A P A P A P A 24

25 STEEL SUMPS KTC SUMP PALLETS WITH FILLING STAND WSP-KTC-AS, Article No. P B WSP-KTC-ZW-AS, Article No. P A With resistant PE-inserts available for all models for storing acids and alkalis Chemical resistance of PE-insert as per chemical resistance list Sump capacity 1000 liter Max. load 1500 kg/m 2 All sump pallets can also be supplied with PE-inserts! Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSP-KTC-DR-AS, Article No. P A Model WSP-KTC-AS WSP-KTC-ZW-AS WSP-KTC-DR-AS Dimensions W x D x H (mm) 1300 x 1360 x x 1400 x x 1400 x 645 Filling stand dimensions W x D x H (mm) 1300 x 1100 x x 1300 x 1100 x x 1300 x 1100 x 320 Sump capacity (l) Article No., painted P B P A P A Article No., fire-galvanized P B P A P A Accessory Acid-resistant PE-insert Article No. P A P A P A 25

26 STEEL SUMPS For storing and filling off water-endangering and flammable liquids LARGE-VOLUME SUMP PALLETS Made from 3 mm fire-galvanized sheet steel Removable fire-galvanized grid Ground clearance for fork-lift transport Models GW 3, GW 5 and GW 6 also suitable for storing 1000 liter containers Models GW 4, GW 5 and GW 6 supplied as single sump pallets, i.e. the single sump pallet are connected together on site with sump pallet connectors to form a single storage surface Particularly large sump capacities and generously dimensioned storage surfaces! GW 1, fire-galvanized, Article No. P A GW 3, fire-galvanized, Article No. P A GW 2, fire-galvanized, Article No. P A, with optional filling station Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin GW 2, fire-galvanized, Article No. P A Optional drive-on ramp for drum cart Model GW 1 GW 2 GW 3 GW 4 GW 5 GW 6 External dimensions W x D x H (mm) 1066 x 2066 x x 2066 x x 2066 x x 2066 x x 2066 x x 2066 x 315 Sump capacity (l) x x x 1200 Max. load (kg/m 2 ) Weight (kg) No. of individual sump pallets No. of sump pallet connectors Ground clearance (mm) Article No., fire-galvanized P A P A P A P A P A P A Accessory Drive-on ramp for drum carts, W x D x H (mm) = 1200 x 1000 x 315, galvanized sheet steel Article No. P A 26

27 STEEL SUMPS CUSTOM-MADE VERSIONS In addition to our various standard models of sumps, we would also like to manufacture sumps according to your special wishes and requirements. No matter whether you require a higher sump capacity, have a special application or need a special design - just contact us, we will be pleased to help you. 27

28 STAINLESS STEEL SUMPS STAINLESS STEEL SUMP PALLETS For storing water-endangering and aggressive media Made from stainless steel , therefore ideally suitable for storing acids and alkalis Support levels with either fire-galvanized or stainless steel grids Ground clearance 100 mm for fork-lift transport Stainless steel sumps are particularly suitable for use in the electroplating, chemical and food industries. Models CW2 and CW4 are particularly suitable for storing 200 liter drums or small containers. CW2-VA, Article No. P A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CW4-VA, Article No. P A KTC-ZW-VA, Article No. P A Models KTC-OS and KTC-ZW are particularly suitable for storing KTCs / IBCs. KTC-OS-VA, Article No. P A Model CW2-VA CW4-VA KTC-OS-VA KTC-ZW-VA Dimensions W x D x H (mm) 1250 x 820 x x 1320 x x 1360 x x 1300 x 480 Sump capacity (l) Max. load (kg/m 2 ) Capacity 2 x 200 liter drum 4 x 200 liter drum 1 KTC/IBC 2 KTC/IBC Article No., with fire-galvanized grid P A P A P A P A Article No., with stainless steel grid P A P A P A P A 28

29 TABLE OF CONTENTS - PE SUMPS 1.2. PE sumps... Approval-No.: Z General Technical Approval DIBt Berlin Load tests on PE sumps page 30 PE sump trays for storing small containers, 60 liter drums and 120 liter drums page PE floor safety elements page 35 PE sumps for storing 200 liter drums page PE drum stands page 41 Mobile PE sumps page PE sumps for KTC / IBC storage page Flexible PE sumps page 47 PE environmental cabinets page 48 PE sumps for storing small containers Serie Red Line page 49 PE station for hazardous substances page

30 PE SUMPS LOAD TESTS ON PE SUMPS Load tests on rotationally molded polyethylene sumps for achieving official constructional approval. A prerequirement for obtaining a general constructional approval from DIBt Berlin was successfully completed load tests. The LACONT PE sumps were tested according to the latest specifications and requirements of DIBt Berlin by an officially certified testing, monitoring and certification institute (test laboratory accredited by DAP - Deutsche Akreditierungssystem Prüfwesen). Deformation tests and, above all, load tests were carried out on sumps filled with water. The load tests were successfully conducted with a load 4-fold compared to the normal operating load. PE-KT-EP5 under a test load of kg Approval-No.: Z PE-KT-EP6 under a test load of 6000 kg General Technical Approval DIBt Berlin PE BOX FOR STORING SMALL CONTAINERS For storing water-endangering and aggressive media Rotationally-molded body of black PE Lockable box cover prevents unauthorized access High sump capacity PE-100-EP8, Article No. P A Model PE-100-EP8 External dimensions W x D x H (mm) 500 x 380 x 445 Sump capacity (l) 60 PE-100-EP8, Art. No. P A PE-100-EP8, Art. No. P A Article No. P A 30

31 PE SUMPS PE SUMP TRAYS FOR STORING SMALL CONTAINERS For storing water-endangering and aggressive media Rotationally-molded body of black PE PE grid as support, in PE-100-EP6 lying in the tray Support easily removable PE-100-EP7 only available without grid support Suitability tested Approval-No.: Z General Technical Approval DIBt Berlin PE-100-EP4, Article No. P A Suitability tested Suitability tested PE-100-EP5, Article No. P A PE-100-EP6, Article No. P A Suitability tested Suitability tested PE-100-EP7, Article No. P A PE-100-EP20, Article No. P A Model PE-100-EP4 PE-100-EP5 PE-100-EP6 PE-100-EP7 PE-100-EP20 External dimensions W x D x H (mm) 430 x 410 x x 420 x x 450 x x 555 x x 675 x 115 Sump capacity (l) Max. load (kg) when used with grid Article No. P A P A P A P A P A 31

32 PE SUMPS PE SUMP TRAYS FOR STORING SMALL CONTAINERS AND CANISTERS For storing water-endangering and aggressive media Suitability tested Rotationally-molded body of black PE Designed for placing flat on the floor, on euro-pallets or worktables and benches PE grid support Available without PE grid for direct storage of containers Approval-No.: Z General Technical Approval DIBt Berlin Suitability tested PE-100-EP22, Article No. P A Model PE-100-EP22 External dimensions W x D x H (mm) 800 x 635 x 230 Sump capacity (l) 60 Max. load (kg) when used with grid 150 Article No., without PE grid Article No., with PE grid P A P A PE-100-EP22, Article No. P A PE SUMPS FOR STORING 60 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Ground clearance for internal transport Galvanized or PE grid support Suitability tested Approval-No.: Z General Technical Approval DIBt Berlin Suitability tested PE-100-EP10, Article No. P A Model PE-100-EP10 External dimensions W x D x H (mm) 805 x 640 x 335 Sump capacity (l) 60 Capacity, 60 liter drums* 2 Max. load (kg) when used with grid 150 PE-100-EP10, Article No. P A Article No., without grid Article No., with galvanized grid Article No., with PE grid * maximum capacity when used with galvanized or PE grid P A P A P A 32

33 PE SUMPS PE SUMPS FOR STORING 60 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Designed for placing flat on the floor Easily removable PE grid support PE-100-EP3 also available without PE grid for direct storage of drums or containers Suitability tested Suitability tested PE-100-EP3, Article No. P A Suitability tested PE-100-EP3, Article No. P A Approval-No.: Z General Technical Approval DIBt Berlin PE-100-EP1, Article No. P A Model PE-100-EP3 PE-100-EP1 External dimensions W x D x H (mm) 990 x 645 x x 625 x 115 Sump capacity (l) Capacity, 60 liter drums* 2 3 Max. load (kg) when used with grid Article No., without PE grid P A - Article No., with PE grid P A P A * maximum capacity when used with PE grid PE sumps for storing small containers - Serie Red Line can be found on page 49! 33

34 PE SUMPS PE SUMP TRAYS FOR STORING SMALL CONTAINERS AND CANISTERS For storing water-endangering and aggressive media Rotationally-molded body of black PE Designed for placing flat on the floor, Approval-No.: Z on euro-pallets or worktables and benches General Technical PE grid support Approval Available without PE grid for direct DIBt Berlin storage of containers Suitability tested Suitability tested PE-100-EP21, Article No. P A Model PE-100-EP21 PE-100-EP23 External dimensions W x D x H (mm) 810 x 640 x x 640 x 150 Sump capacity (l) Max. load (kg) when used with grid Article No., without PE grid P A P A Article No., with PE grid P A P A PE-100-EP23, Article No. P A PE SUMPS FOR STORING 120 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Designed for placing flat on the floor Easily removable PE grid support PE-100-EP9 also available without PE grid for direct storage of drums or containers Suitability tested Suitability tested Approval-No.: Z General Technical Approval DIBt Berlin PE-100-EP9, Article No. P A Suitability tested PE-100-EP2, Article No. P A Model PE-100-EP9 PE-100-EP2 External dimensions W x D x H (mm) 990 x 645 x x 1245 x 115 Sump capacity (l) Capacity, 120 liter drums* Max. load (kg) when used with grid Article No., without PE grid P A - Article No., with PE grid P A P A * maximum capacity when used with PE grid PE-100-EP9, Article No. P A 34

35 PE SUMPS PE FLOOR SAFETY ELEMENTS FOR STORING DRUMS AND SMALL CONTAINERS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Designed for placing flat on the floor Individual segments can be combined by galvanized element connectors Ideally suited for covering large-scaled surfaces Galvanized or PE grid support Maximum capacity 1000 kg/m 2 with uniformly distributed load Suitability tested Approval-No.: Z General Technical Approval DIBt Berlin PE-BS1, Article No. P A, with optional PE drive-on ramp for drum cart Model PE-BS1 PE-BS2 PE-BS3 External dimensions W x D x H (mm) 1270 x 825 x x 1215 x x 1610 x 150 Sump capacity (l) Article No., with galvanized grid P A P A P A Article No., with PE grid P A P A P A Accessories Element connectors Type VB 08 VB 11 VB 12 VB 15 Dimensions W x D (mm) 40 x x x x 1550 Article No., galvanized P A P A P A P A Accessories Edge clips and cross connectors Type RK 150 KK150 Accessories Type PE drive-on ramp AF-PE Dimensions W x D (mm) 100 x x 120 Dimensions W x D (mm) 800 x 1200 Article No., galvanized P A P A Article No. P A Suitability tested Combination example 35

36 PE SUMPS PE SUMPS FOR STORING 200 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Designed for placing flat on the floor or on euro or chemical pallets Available without grid support for direct storage of drums or containers, or optionally with grid Suitability tested Suitability tested PE-200-EP9, Article No. P A Approval-No.: Z General Technical Approval PE-200-EP9, Article No. P A DIBt Berlin Model PE-200-EP9 PE-200-EP10 External dimensions W x D x H (mm) 1222 x 815 x x 1222 x 235 Sump capacity (l) Capacity, 200 liter drums* 2 4 Max. load (kg) when used with grid Article No., without grid P A P A Article No., with galvanized grid P A P A Article No., with PE grid P A P A * maximum capacity when used with galvanized or PE grid Suitability tested Suitability tested PE-200-EP10, Article No. P A PE-200-EP10, Article No. P A 36

37 PE SUMPS PE - LIFTING CONSTRUCTION Suitability tested Suitability tested Accessory PE-Lifting construction, W x D x H (mm) = 1200 x 1200 x 100, by special PE-pallet including sump pallet locking device Article No. P A PE-200-EP10, Article No. P A, with optional lifting contruction, Art. No. P A PE-200-EP10, Article No. P A PE SUMPS FOR STORING 200 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Ground clearance for internal transport Available without grid support for direct storage of drums or containers, or optionally with grid Suitability tested Suitability tested PE-200-EP11, Article No. P A Suitability tested PE-200-EP11, Article No. P A Model PE-200-EP11 External dimensions W x D x H (mm) 1210 x 810 x 470 Sump capacity (l) 240 Capacity, 200 liter drums* 2* Approval-No.: Z General Technical Approval DIBt Berlin Max. load (kg) when used with grid 500 Article No., without grid Article No., with galvanized grid Article No., with PE grid P A P A P A * maximum capacity when used with grid PE-200-EP11, Article No. P A 37

38 PE SUMPS PE SUMPS FOR STORING 200 LITER DRUMS - SERIE BLUE LINE For storing water-endangering and aggressive media Rotationally-molded body of blue PE Circumferential stabilizing ribs Ground clearance for internal transport With PE grid Suitability tested Suitability tested PE-200-EP13, Article No. P A, with optional PE drum stand PE-200-EP12, Article No. P A Approval-No.: Z General Technical Approval DIBt Berlin Model PE-200-EP12 PE-200-EP13 External dimensions W x D x H (mm) 1250 x 850 x x 1250 x 580 Sump capacity (l) Capacity, 200 liter drums 2 4 Max. load (kg) when used with grid Article No., with PE grid P A P A Suitability tested Suitability tested PE-200-EP13, Article No. P A PE-200-EP12, Article No. P A, with optional PE drum stand 38

39 PE SUMPS PE SUMPS FOR STORING 200 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Ground clearance for internal transport PE-200-EP6 without ground clearance for placing flat on the floor Galvanized or PE grid support PE drum stands can be found on page 41! Suitability tested Suitability tested Suitability tested PE-200-EP1, Article No. P A PE-200-EP2, Article No. P A PE-200-EP3, Article No. P A Suitability tested Suitability tested PE-200-EP4, Article No. P A PE-200-EP6, Article No. P A Approval-No.: Z General Technical Approval PE hazardous substances stations can be found on page 50! DIBt Berlin Model PE-200-EP1 PE-200-EP2 PE-200-EP3 PE-200-EP4 PE-200-EP6 External dimensions W x D x H (mm) 925 x 765 x x 705 x x 1245 x x 1250 x x 695 x 330 Sump capacity (l) Capacity, 200 liter drums Max. load (kg) when used with grid Article No., with galvanized grid P A P A P A P A P A Article No., with PE grid P A P A P A P A P A 39

40 PE SUMPS PE SUMPS FOR STORING 200 LITER DRUMS For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs Ground clearance for internal transport Available without grid support for placing directly on euro-pallets, or optionally with grid Side ribs ensure that euro-pallets cannot slip Suitability tested Suitability tested PE-200-EP5, Article No. P A Approval-No.: Z General Technical Approval DIBt Berlin PE-200-EP5, Article No. P A Model PE-200-EP5 External dimensions W x D x H (mm) 1310 x 910 x 380 Sump capacity (l) 220 Capacity, 200 liter drums 2 Max. load (kg) when used with grid 500 Article No., without grid Article No., with galvanized grid Article No., with PE grid P A P A P A Side ribs hold euro-pallet in place without risk of slipping Suitability tested For storing water-endangering and aggressive media Rotationally-molded body of black PE For placing flat on the floor Without grid support for placing 200 liter drums directly Model PE-300-EP1 External dimensions W x D x H (mm) 990 x 990 x 465 Sump capacity (l) 300 Capacity, 200 liter drums 1 Article No. P A Mobile PE sumps can be found on page 42! PE-300-EP1, Art. No. P A 40

41 PE SUMPS PE DRUM STANDS FB 1/60, Article No. P A FB 1/200, Art. No. P A FB 2/60, Article No. P A For horizontal storage of steel drums (60 liter or 200 liter capacity) 1-drum models made of black PE 2-drum models made of yellow PE FB 1-Combi, Article No. P A FB 1-Combi, Article No. P A FB 2/200, Article No. P A Model FB 1/60 FB 1/200 FB 1-Combi FB 2/60 FB 2/200 External dimensions W x D x H (mm) 390 x 515 x x 790 x x 505 x x 385 x x 585 x 390 Capacity 1 x 60 liter drum 1 x 200 liter drum 1 x 60 o. 1 x 200 liter drum 2 x 60 liter drum 2 x 200 liter drum Article No. P A P A P A P A P A 41

42 PE SUMPS MOBILE PE SUMPS For storing and transporting water-endangering and aggressive media in 60 liter drums and small containers Rotationally-molded body of black PE Circumferential stabilizing ribs Available with or without PE grid support PE construction with galvanized drawbar With 3 swiveling and 2 fixed castors ( solid gum ø 100 mm) Max. load 200 kg PE-100-EP3-cart, with PE grid, Art. No. P A Model PE-100-EP3-cart External cart dimensions W x D x H (mm) 1000 x 700 x 245 Sump capacity (l) 65 Capacity, 60 liter drums* 2 Max. load (kg) when used with grid 200 Article No., without PE grid P A Article No., with PE grid P A * maximum capacity when used with PE grid Approval-No.: Z General Technical Approval for collection trough PE-100-EP3-cart, with PE grid, Art. No. P A DIBt Berlin For storing and transporting water-endangering and aggressive media in 200 liter drums Rotationally-molded body of black PE Circumferential stabilizing ribs Available with or without grid support PE construction with steel pushbar With 3 swiveling and 2 fixed castors ( solid gum ø 100 mm) Max. load 500 kg PE-200-EP9-cart, without grid support, Art. No. P A PE-200-EP9-cart, with PE grid, Art. No. P A Model PE-200-EP9-cart External cart dimensions W x D x H (mm) 1200 x 800 x 870 Sump capacity (l) 235 Capacity, 200 liter drums* 2 Max. load (kg) when used with grid 500 Article No., without grid P A Article No., with galvanized grid P A Article No., with PE grid P A * maximum capacity when used with galvanized or PE grid 42

43 PE SUMPS MOBILE PE - SHELF CART For storing and transporting water-endangering and aggressive media in small containers Cart construction is made from solid steel frame - blue Pushbar in ergonomic height Rotationally-molded tray body of black PE For direct storage of containers With 2 swivel with brakes and 2 fixed castors - ø 75 mm PE-100-EP22-cart: 1 storage level in height 110 mm Tray height 240 mm PE-100-EP5-cart: 2 storage levels in height 110/830 mm each with sump tray Tray height 150 mm PE-100-EP22-cart, Art. No. P A Model PE-100-EP22-cart External dimensions L x W x H (mm) 870 x 640 x 1100 Sump capacity (l) 60 Article No. P A Approval-No.: Z General Technical Approval for collection trough DIBt Berlin PE-100-EP22-cart, Art. No. P A Model PE-100-EP5-cart External dimensions L x W x H (mm) 770 x 440 x 1100 Sump capacity (l) 2 x 20 Article No. P A PE-100-EP5-cart, Art. No. P A PLASTIC DRUM ROLLERS For the internal transport of drums Drum roller made from green PE Swiveling castors made from black PE External dimensions 860 mm ø x 230 mm high Round shape Max. load 240 kg 4 free-moving plastic castors Galvanized drawbar FR-PE-200, Article No. P A 43

44 PE SUMPS PE SUMPS FOR KTC / IBC STORAGE - SERIE BLUE LINE For storing water-endangering and aggressive media Rotationally-molded body of blue PE Approval-No.: Z Circumferential stabilizing ribs General Ground clearance for internal transport Technical Approval With support surface by PE pallet (for PE-KT-EP4) or by PE grid (for PE-KT-EP5) DIBt Berlin Suitability tested Suitability tested PE-KT-EP5, Article No. P A PE-KT-EP4, Article No. P A Model PE-KT-EP4 PE-KT-EP5 External dimensions W x D x H (mm) 1250 x 1250 x x 1300 x 580 Sump capacity (l) Capacity, KTC / IBC 1 2 Max. load (kg) when used with grid Article No., with PE grid P A P A Suitability tested Accessory Filling container of yellow PE for collection of drip loss Article No. P A Suitability tested PE-KT-EP4, Article No. P A, with optional filling container, Art. No. P A PE-KT-EP5, Article No. P A 44

45 PE SUMPS PE SUMPS FOR KTC / IBC STORAGE For storing water-endangering and aggressive media Rotationally-molded body of black PE Circumferential stabilizing ribs ensure high load values Ground clearance for internal transport Galvanized or PE grid support Cutouts for easily removable grid Suitability tested Suitability tested PE-KT-EP2, with optional PE drum stand, Art. No. P A Approval-No.: Z General Technical Approval PE-KT-EP1, Article No. P A DIBt Berlin Suitability tested Suitability tested PE-KT-EP3, Article No. P A PE-KT-EP3, with optional PE drum stand, Art. No. P A Model PE-KT-EP1 PE-KT-EP2 PE-KT-EP3 External dimensions W x D x H (mm) 1290 x 1290 x x 1450 x x 1290 x 480 Sump capacity (l) Capacity, KTC / IBC Max. load (kg) when used with grid Article No., with galvanized grid P A P A P A Article No., with PE grid P A P A P A Accessory PE drum stand provides extra height for filling processes, W x D x H (mm) = 1210 x 1200 x 400 Article No. P A 45

46 PE SUMPS PE SUMPS FOR KTC / IBC STORAGE For storing water-endangering and aggressive media Suitability tested Rotational-molded body of black PE Type PE-KT-EP6 with integrated filling container Circumferential stabilizing ribs Ground clearance for internal transport Galvanized or PE grid support Approval-No.: Z General Technical Approval DIBt Berlin PE-KT-EP7, Article No. P A Model PE-KT-EP6 PE-KT-EP7 External dimensions W x D x H (mm) 1300 x 1700 x x 1840 x 640 Sump capacity (l) Capacity, KTC / IBC 1 1 Max. load (kg) when used with grid Article No., with galvanized grid P A P A Article No., with PE grid P A P A Suitability tested Suitability tested PE-KT-EP6, Article No. P A PE-KT-EP7, Article No. P A, with optional PE filling stand 46

47 PE SUMPS For storing water-endangering and aggressive media FLEXIBLE PE SUMPS FOR 200 LITER DRUMS Body made of green PE Flexible frontside, can be pressed down by fork-lift truck Independent uprighting Save and easy storing and removing of loaded pallets Ground clearance and transportability by using included pallet FW 2, Article No. P A FW 1, Article No. P A Spill guard - Serie red line can be found on page 218! FW 2, Article No. P A Model FW 1 FW 2 External dimensions W x D x H (mm) 1500 x 1100 x x 1300 x 440 Pallet dimensions W x D (mm) 1200 x x 1140 Sump capacity (l) Capacity, 200 liter drums 2 4 Article No. P A P A Accessory Additional pallet for placing in the sump pallet, dimensions W x D (mm) 1200 x x 1140 Article No. P A P A 47

48 PE ENVIRONMENTAL CABINETS PE ENVIRONMENTAL CABINETS For the storage of water-endangering and aggressive media in small containers indoors Double door PE cabinet, body white, doors blue or red Cabinet body rotationally-molded in one piece, therefore particularly stable construction Doors with cylinder lock to prevent unauthorized access, as per TRGS 526 / BGR 120 SLS 1180-PE with PE base sump and 2 x V2A steel shelves SLS 1835-PE with PE base sump and 3 x V2A steel shelves Load capacity per shelf level 50 kg SLS 1835-PE with ground clearance SLS 1180-PE, Article No. P A SLS 1180-PE, Article No. P A SLS 1835-PE, Article No. P A Also suitable for storing acids and alkalis! SLS 1835-PE, Article No. P A Model SLS 1180-PE SLS 1835-PE External dimensions W x D x H (mm) 975 x 520 x x 510 x 1835 Internal dimensions W x D x H (mm) 810 x 440 x x 440 x 1490 Sump capacity (l) Article No., doors blue P A P A Article No., doors red P A P A 48

49 PE SUMPS PE SUMPS FOR STORING SMALL CONTAINERS - SERIE RED LINE For the storage of water-endangering and aggressive media indoors and outdoors Suitability tested Rotationally-molded body of red PE Circumferential stabilizing ribs Designed for placing flat on the floor Version for direct storage of containers, PE-300-EP2 with PE grid support Equipped with protective cover for storing outdoors Suitability tested PE-100-EP25, Article No. P A Approval-No.: Z Suitability tested General Technical Approval DIBt Berlin PE-300-EP2, Article No. P A PE-300-EP2, Article No. P A Suitability tested PE-100-EP25, Article No. P A Suitability tested PE-500-EP1, Article No. P A Model PE-100-EP25 PE-300-EP2 PE-500-EP1 External dimensions W x D x H (mm) 680 x 750 x x 750 x x 630 x 1050 Sump capacity (l) Article No. P A P A P A PE-500-EP1, Article No. P A 49

50 PE STATION FOR HAZARDOUS SUBSTANCES PE STATION FOR HAZARDOUS SUBSTANCES For the storage of water-endangering and aggressive media indoors and outdoors Suitability tested Rotationally-molded body of black PE Circumferential stabilizing ribs Base construction enables internal transport Galvanized or PE grid support Lockable double door Approval-No.: Z General Technical Approval DIBt Berlin PE-200-EP8, Article No. P A Model PE-200-EP8 External dimensions W x D x H (mm) 1500 x 1040 x 1900 Internal dimensions W x D x H (mm) 1300 x 910 x 1400 Sump capacity (l) 300 Capacity, 200 liter drums 2 Max. load (kg) when used with grid 500 Article No., with galvanized grid Article No., with PE grid P A P A Accessory Shelf set for storing small containers or canisters with 2 height-adjustable grid shelves, W x D x H (mm) = 1360 x 635 x 1150, max. load per shelf 200 kg Article No. R A PE-200-EP8 under test load of 2400 kg Suitability tested Suitability tested PE-200-EP8, Article No. P A, with optional shelf set PE-200-EP8, Article No. P A 50

51 PE STATION FOR HAZARDOUS SUBSTANCES PE STATION FOR KTC / IBC For the storage of water-endangering and aggressive media indoors and outdoors Rotationally-molded body of black PE Circumferential stabilizing ribs Base construction enables internal transport Galvanized or PE grid support Lockable double door Approval-No.: Z General Technical Approval DIBt Berlin PE-KT-EP8, Article No. P A Model PE-KT-EP8 External dimensions W x D x H (mm) 1500 x 1480 x 2160 Internal dimensions W x D x H (mm) 1340 x 1360 x 1390 Sump capacity (l) 1000 Capacity, KTC / IBC 1 Capacity, 200 liter drum vertical 4 Capacity, 200 liter drum horizontal* 2 Max. load (kg) when used with grid 1700 Article No., with galvanized grid Article No., with PE grid P A P A * possible only in combination with PE drum stand Article No. P A PE-KT-EP8, Article No. P A Safety storehouses for KTC / IBC can be found on page 155! PE-KT-EP8, Art. No. P A, with optional drum stand, Art. No. P A 51

52 LEGAL BASIS PRACTICAL INFORMATION 3 1. Important laws and regulations WHG Stawa-R VAwS VbF BetrSichV TRbF TRGS TRG LöRüRL CLP/GHS German Water Management Act Steel trough guidelines Regulation on facilities handling water-endangering substances Regulation for flammable liquids Regulation for industrial safety Technical Regulation for flammable liquids Technical Regulation for hazardous substances Technical Regulation for pressurized gases Fire water-containment guidelines Regulation on classification, labelling and packaging) / Globally Harmonized System) Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 2. Specialized company Facilities for the storage of water-endangering and other hazardous substances can only be manufactured and installed by specialized manufacturer in accordance with WHG. Furthermore (in addition) manufacturer s qualification class c is required. Approval-No.: Z General Technical Approval DIBt Berlin 3. Water-endangering liquids old - valid until November 30, 2010 new - GHS/REACH applies from December 1, 2010 Indication Hazard symbol R-phrase Hazard classes Indication Hazard symbol H-phrase GHS-category very hazardous (severely) WGK 3 hazardous R50, R50/53 WGK 2 slightly hazardous R52/53, R53 WGK 1 acutely hazardous to the aquatic environment H400 category 1 chronically hazardous to the aquatic environment H410 category 2 chronically hazardous to the aquatic environment H411 category 2 chronically hazardous to the aquatic environment H412 category 3 chronically hazardous to the aquatic environment H413 category 4 4. Sump capacity The sump device has to collect 10% of the total media stored above, but at least the contents of the largest stored container. In water protection areas 100% of the stored media have to be collected, assuming that storage is permitted. 5. Approvals Existing type tests are replaced by a declaration of conformity (UHP) of the manufacturer; collection systems with a sump capacity up to 1000 liters have to be manufactured according to the steel trough guidelines (Stawa-R). Beyond that general technical approvals are granted by DIBT for products which do not correspond to the steel trough guidelines and for collection systems made from plastic. 6. Reliability of sumps In case of doubt it would be always correct if sumps are made from the same material like containers in which hazardous substances are stored. In most cases it is 3 mm steel. Usage of stainless steel or plastic is necessary for the storage of acids and alkalis. Reliability lists are useful for selecting the materials. 52

53 TABLE OF CONTENTS - SHELVING SYSTEMS FOR HAZARDOUS SUBSTANCES 2. Shelving systems for hazardous substances... Our steel sumps are available in our standard color RAL sky blue (if not specified separately) Hazardous substances shelving units for small containers page Filling stations for 60 liter drums page 62 Filling stations for 200 liter drums page 63 Stacking racks with base sumps page Drum racks page Rack base sumps and suspension sumps for pallet racks page Hazardous substances pallet racks with sumps page Water protection compartment containers indoors page 75 53

54 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS SHELVING UNITS FOR WATER-ENDANGERING SUBSTANCES IN SMALL CONTAINERS For the storage of water-endangering substances With sump tray shelves at each storage level 2 different combinable shelf widths (1000 and 1300 mm) allow optimal utilisation of existing storage space Mixture of basic and extension units allows extension as required Fittings: All shelving parts and sump tray shelves galvanized Height-adjustable shelves at intervals of 25 mm Max. load per storage level 200 kg with uniformly distributed load Max. unit load 1200 kg Stable construction by reinforced struts Dismounted delivery for easy self-assembly Our standard - 5 storage levels! KG-GR 100 W, Article No. R D Environmental cabinets can be found on page 78! Building Regulations List A, Part 1 Our standard - 5 storage levels! KG-GR 130 W, basic unit, Article No. R D and KG-GR 100 W, extension unit, Article No. R D steel troughs guidelines TüV-Nord systems DIBt Berlin Model KG-GR 100 W KG-GR 130 W External dimensions W x D x H (mm) 1060 x 635 x x 635 x 2000 Lowest storage level fittings 1 x base sump tray, galvanized 1 x base sump tray, galvanized Other storage level fittings 4 x sump tray shelves, galvanized 4 x sump tray shelves, galvanized Sump capacity (l) 5 x 30 5 x 35 Article No., basic unit R D R D External dimensions, extension unit W x D x H (mm) 1010 x 635 x x 635 x 2000 Article No., extension unit R D R D Accessory Article No. Article No. Additional sump tray shelf as storage level R D R D 54

55 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS SHELVING UNITS FOR FLAMMABLE LIQUIDS IN SMALL CONTAINERS For the storage of flammable liquids With 1 x sump tray shelf as lowest storage level and 4 x galvanized grid-type shelves 2 different combinable shelf widths (1000 and 1300 mm) allow optimal utilisation of existing storage space Mixture of basic and extension units allows extension as required Fittings: All shelving parts, sump tray shelves and grid-type shelves galvanized Height-adjustable shelves at intervals of 25 mm Max. load per storage level 200 kg with uniformly distributed load Max. unit load 1200 kg Stable construction by reinforced struts Dismounted delivery for easy self-assembly Our standard - 5 storage levels! KG-GR 100 G, Article No. R D Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Our standard - 5 storage levels! KG-GR 100 G, basic unit, Art. No. R D and extension unit, Art. No. R D Hazardous substances cabinets can be found from page 111! Model KG-GR 100 G KG-GR 130 G External dimensions W x D x H (mm) 1060 x 635 x x 635 x 2000 Lowest storage level fittings 1 x base sump tray, galvanized 1 x base sump tray, galvanized Other storage level fittings 4 x grid shelves, galvanized 4 x grid shelves, galvanized Sump capacity (l) 1 x 30 1 x 35 Article No., basic unit R D R D External dimensions, extension unit W x D x H (mm) 1010 x 635 x x 635 x 2000 Article No., extension unit R D R D Accessory Article No. Article No. Additional grid shelf as storage level R D R D 55

56 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS SHELVING UNITS FOR WATER-ENDANGERING AND AGGRESSIVE LIQUIDS IN SMALL CONTAINERS For the storage of water-endangering and aggressive liquids With PE sump tray shelves at each storage level 2 different combinable shelf widths (1000 and 1300 mm) allow optimal utilisation of existing storage space Mixture of basic and extension units allows extension as required Our standard - 5 storage levels! KG-GR 130 WPE, basic unit, Art. No. R D and extension unit, Art. No. R D Fittings: All shelving parts galvanized Sump tray shelves with PE insert Height-adjustable shelves at intervals of 25 mm Max. load per storage level 200 kg with uniformly distributed load Max. unit load 1200 kg Stable construction by reinforced struts Dismounted delivery for easy self-assembly Acid and alkali cabinets can be found on page 91! Model KG-GR 100 WPE KG-GR 130 WPE External dimensions W x D x H (mm) 1060 x 635 x x 635 x 2000 Lowest storage level fittings 1 x PE base sump tray 1 x PE base sump tray Other storage level fittings 4 x PE sump tray shelves 4 x PE sump tray shelves Sump capacity (l) 5 x 30 5 x 35 Article No., basic unit R D R D External dimensions, extension unit W x D x H (mm) 1010 x 635 x x 635 x 2000 Article No., extension unit R D R D Accessory Article No. Article No. Additional PE sump tray shelf as storage level R D R D 56

57 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS SHELVING UNITS FOR WATER-ENDANGERING AND AGGRESSIVE LIQUIDS IN SMALL CONTAINERS For the storage of water-endangering and aggressive liquids With 1 x PE sump tray shelf as lowest storage level and 4 x galvanized or PE grid shelves 2 different combinable shelf widths (1000 and 1300 mm) allow optimal utilisation of existing storage space Mixture of basic and extension units allows extension as required Our standard - 5 storage levels! KG-GR 130 GPE, basic unit, Art. No. R D and KG-GR 130 PG, extension unit, Art. No. R D Fittings: All shelving parts galvanized Tray-shaped shelves with PE insert 4 x galvanized or PE grid shelves Height-adjustable shelves at intervals of 25 mm Max. load per storage level with uniformly distributed load: with galvanized grid shelf 200 kg, with PE grid shelf 130 kg Max. unit load 1200 kg Stable construction by reinforced struts Dismounted delivery for easy self-assembly PE environmental cabinets can be found on page 48! Model KG-GR 100 GPE KG-GR 130 GPE KG-GR 100 PG KG-GR 130 PG External dimensions W x D x H (mm) 1060 x 635 x x 635 x x 635 x x 635 x 2000 Lowest storage level fittings 1 x PE base sump tray 1 x PE base sump tray 1 x PE base sump tray 1 x PE base sump tray Other storage level fittings 4 x galvanized grid shelves 4 x galvanized grid shelves 4 x PE grid shelves 4 x PE grid shelves Sump capacity (l) 1 x 30 1 x 35 1 x 30 1 x 35 Article No., basic unit R D R D R D R D External dimensions, extension unit W x D x H (mm) 1010 x 635 x x 635 x x 635 x x 635 x 2000 Article No., extension unit R D R D R D R D Accessory Article No., galvanized grid shelf Article No., PE grid shelf Additional shelf as storage level R D R D R D R D 57

58 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS FOR THE STORAGE OF HAZARDOUS SUBSTANCES IN SMALL CONTAINERS Our hazardous substances shelving units on pages can be supplied in many different version: Powder-coated support profiles Various shelving heights (e.g mm) Various shelving widths (e.g. 700 mm) Various shelving depths (e.g. 400, 500 or 800 mm) Sump tray shelves with higher sump capacity Various base sump tray sizes We can supply Your hazardous substances shelving according to your particular space requirements. Please make use of our planning service! Combinability: All the hazardous substances shelving units on pages and 62 can be combined at will. This means that the available storage space can be equipped with shelving that exactly matches the substances to be stored with respect to container sizes and amounts of substances. The modular construction with basic and extension units means that the hazardous substances shelving can be extended at any time. 58

59 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS STAINLESS STEEL SHELVING UNITS FOR WATER-ENDANGERING AND AGGRESSIVE LIQUIDS IN SMALL CONTAINERS For the storage of water-endangering and aggressive liquids in small containers Especially suitable for use in laboratory, hospital and food sector Available in 2 different shelf depths ( mm) Quick and easy installation Fittings: All shelving parts and base sump tray made from stainless steel Height-adjustable slotted shelves at intervals of 150 mm Adjustable feets on the bottom of the shelf stands Max. field load 1000 kg Basic unit includes 2 x shelf stands, 3 x slotted shelves, 1 x base sump tray, 1 x cross bracing Extension unit includes 1 x shelf stands, 3 x slotted shelves, 1 x base sump tray KG-GR VA, basic unit, Art. No. R A KG-GR VA, basic unit, Art. No. R A and KG-GR VA, extension unit, Art. No. R A KG-GR VA, basic unit, Art. No. R A Model KG-GR VA KG-GR VA KG-GR VA KG-GR VA KG-GR VA KG-GR VA External dimensions W x D x H (mm) 600 x 300 x x 300 x x 300 x x 500 x x 500 x x 500 x 1800 Sump capacity (l) Max. field load (kg) Article No., basic unit R A R A R A R A R A R A Article No., extension unit R A R A R A R A R A R A Accessory Article No. Article No. Article No. Article No. Article No. Article No. Additional slotted shelf R A R A R A R A R A R A Cross bracing for extension unit* R A R A R A R A R A R A * in 3 shelf areas of each a cross bracing is to be installed 59

60 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS WITH SUMP PALLET Large sump capacity by combination of sump pallet Shelf fittings: and hazardous substances shelving Galvanized Galvanized grid shelves Height-adjustable shelves at intervals of 25 mm Dismounted delivery with instructions for easy Max. load per storage level 200 kg* self-assembly Sump pallet fittings: Approved sump pallet with Ü-sign Painted in RAL sky blue or fire-galvanized, dimensions please see table below Sump capacity 210 liters Safe liquid transfer with projecting grid in front of shelves Ground clearance 100 mm * with uniformly distributed load Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin GR1-G, sump pallet painted, Art. No. R C GR2-G, sump pallet painted, Art. No. R C Ideally suitable for storing agricultural pesticides! GR1-G, sump pallet fire-galvanized, Art. No. R C GR2-G, sump pallet fire-galvanized, Art. No. R C Model GR1-G GR2-G GR3-G Dimensions W x D x H (mm) 1060 x 635 x x 635 x x 635 x 2100 Sump pallet dimensions W x D x H (mm) 1250 x 820 x x 820 x x 820 x 215 Fittings 5 x grid shelves 2 x 5 grid shelves 3 x 5 grid shelves Sump capacity (l) Article No., sump pallet painted R C R C R C Article No., sump pallet fire-galvanized R C R C R C 60

61 HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS HAZARDOUS SUBSTANCES SHELVING UNITS FOR SMALL CONTAINERS WITH SUMP PALLET GR3-G, sump pallet painted, Article No. R C Hazardous substances shelvings are available in several versions: Various shelving heights Various shelving widths Various shelving depths Various sump pallet sizes We are pleased to meet your areal specifications. Take advantage of our planning service! 61

62 FILLING STATIONS FOR 60 LITER DRUMS FILLING STATIONS FOR 60 LITER DRUMS WITH SUMP PALLET The use of 60 liter drums when handling hazardous substances on a day-to-day basis is widespread. The 60 liter filling stations have been developed in order to store these drums and fill off liquids from them in safety. Sump pallet made from 3 mm galvanized sheet steel / sump capacity 60 liters Ground clearance 40 mm Horizontal storage of 60 liter drums Grid shelf for small container storage Mixture of basic and extension units allows extension as required Plug-in connections for high stability Height-adjustable storage levels Max. load per crossbeam pair 200 kg Max. load per unit 600 kg Galvanized for high corrosion protection Fixed drum supports as standard Assembly instructions provided for quick assembly AR 2000 / 660 GR, Art. No. R A, with opt. can support Model AR 1150 / 660 AR 1150 / 360 GR AR 2000 / 960 AR 2000 / 660 GR External dimensions W x D x H (mm) 1360 x 635 x x 635 x x 635 x x 635 x 2000 Sump pallet dimensions W x D x H (mm) 1240 x 840 x x 840 x x 840 x x 840 x 150 Sump capacity (l) Capacity 6 x 60 liter drums 3 x 60 liter drums and 9 x 60 liter drums 6 x 60 liter drums and 1 level for small containers 1 level for small containers Article No. / basic unit R A R A R A R A Article No. / extension unit R A R A R A R A Accessories Additional storage level with fixed support for 3 x 60 liter drums Additional grid storage level Grid support level for sump pallet Can support Article No. R A R A R A R A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Stopcocks can be found on page 204! AR 1150 / 660, Art. No. R A, with optional can support AR 1150 / 360 GR, Art. No. R A 62

63 FILLING STATIONS FOR 200 LITER DRUMS FILLING STATIONS FOR 200 LITER STEEL DRUMS WITH SUMP PALLET For the storage and filling off of hazardous substances in accordance with regulations Sump pallet made from 3 mm fire-galvanized sheet steel / sump capacity 210 liters, with Ü-sign in accordance with steel trough guidelines Ground clearance 100 mm Horizontal storage of 200 liter steel drums Mixture of basic and extension units allows extension as required Max. load per unit 1200 kg Powder-coated filling frames, RAL 9006 Version A with fixed drum support Version B with removable galvanized drum pallet Versions A and B can be combined Assembly instructions provided for quick assembly, pre-mounted support frames AFS-A, basic unit, without grid, Article No. R B, with optional can support, Article No. R B AFS-B, basic unit, without grid, Article No. R B and AFS-A, extension unit, without grid, Article No. R B, with optional can support, Article No. R B AFS-B, basic unit, without grid, Article No. R B Stopcocks can be found on page 204! Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Model AFS-A AFS-B External dimensions of filling station W x D x H (mm) 1470 x 810 x x 810 x 1000 Sump pallet dimensions W x D x H (mm) 1325 x 1320 x x 1320 x 250 Sump capacity (l) Capacity, 200 liter drums 2 2 Article No., basic unit, without grid R B R B External dimensions of extension unit W x D x H (mm) 1410 x 810 x x 810 x 1000 Article No., extension unit, without grid R B R B Accessories Grid support for sump pallet Can support Collision protection Article No. R B R B Z A Example of combination with grid supports 63

64 STACKING RACKS FILLING RACKS WITH SUMP PALLET Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSP-4L-OS with 2 x STR-3 stacking racks and can support Placing a 200 liter drum horizontally on the top storage level is easier said than done. Using the fork tips of a fork-lift truck involves a high environmental risk and is therefore forbidden. The stacking rack is an officially approved solution that meets the practical requirements of day-to-day work. It is done like this: The fork-lift truck is used to lift up a rack. The empty drums are removed and replaced by full ones and the rack is replaced by the fork-lift truck. WSP-2-OS with 2 x STR-1 stacking racks and can support Max. 3 stacking racks on top of one another All stacking racks except STR-1 can be combined at will Steel drums with a capacity of up to 220 liter can be stored The racks are protected against falling over by being anchored to one another and to the sump pallet Water protection pallets with removable fire-galvanized grid supports WSP-8-OS with 1 x STR-G and 1 x STR-2 stacking racks and can support Sump pallets / Water protection pallets Stacking racks Model WSP-2-OS WSP-4-OS WSP-4L-OS WSP-8-OS STR-1 STR-2 STR-3 STR-G Dimensions W x D (mm) 800 x x x x x x x x 1000 Height (mm) Capacity (l) 2 x x x x x x x 50 / 60 small containers Sump capacity (l) Art. No., painted P A P A P A P A Art. No., fire-galvanized P A P A P A P A R A R A R A R A Possible combination: WSP-2-OS with STR-1 or STR-3 WSP-4-OS with STR-2, STR-3, STR-G WSP-4L-OS with STR-1 or STR-3 WSP-8-OS with STR-2, STR-3, STR-G All water protection pallets are also available without stacking racks. WSP-4-OS with STR-2+STR-3 stacking racks and can support WSP-4-OS with 2 x STR-2 stacking racks and can support Accessories Can support Rotating drum support Article No. Z A Z A 64

65 STACKING RACKS FILLING RACKS WITH PUSH-IN SUMP TRAYS Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin E2 with STR-3 + STR-G stacking racks and can support E2 with 2 x STR-G stacking racks Simply safe, simply good. Four fork-lift tip openings mean that each rack can be safely picked up and put down with a fork-lift truck. Take off the empty drums, put on the new ones and return the rack to its position. All racks are anchored to prevent them falling over. All stacking racks are fire-galvanized Base and push-in sumps available painted or fire-galvanized Push-in base sump, sump capacity 205 liters Push-in base sump without grid support Stopcocks can be found on page 204! E2 with STR-G stacking rack Possible assembly Possible assembly Model Sump tray E1 STR-1 Sump tray E2 STR-2 STR-3 STR-G Dimensions W x D (mm) 690 x x x x x x 1000 Height (mm) Capacity (l) x x x 50 / 60 small containers Article No., painted P A - P A Article No., fire-galvanized P A R A P A R A R A R A E2 with STR-2 + STR-G stacking racks and can support E2 with 2 x STR-2 stacking racks and can support E2 with STR-2 + STR-3 stacking racks and can support 65

66 DRUM RACKS DRUM RACKS WITH SUMP PALLET For horizontal storage and filling off from various container sizes Not only their safe storage but also proper filling off plays a great role with waterendangering substances. The drum racks that have been specially developed for this purpose guarantee: Safety in accordance with the rules Practically tested construction Simple operation Flexible usability Assembly instructions provided for quick assembly Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin FR2-2236, Article No. R A, with optional can support Stopcocks can be found on page 204! FR2-3636, Article No. R A, with optional can support FR2-2222, Article No. R A, with optional can support 66

67 DRUM RACKS DRUM RACKS WITH SUMP PALLET Drum racks can also be extended at a later date Model FR FR FR FR3-96 External dimensions W x D x H (mm) 1660 x 800 x x 800 x x 800 x x 800 x 2000 Sump pallet dimensions W x D x H (mm) 1325 x 1320 x x 1320 x x 1320 x x 1320 x 250 Sump capacity (l) Capacity, liter drums 4 x x 200 / 3 x 60 6 x 60 9 x 60 Fire-galvanized sump pallet without grid support Article No. / basic unit R A R A R A R A Article No. / extension unit R A R A R A R A Fire-galvanized sump pallet with grid support Article No. / basic unit R A R A R A R A Article No. / extension unit R A R A R A R A Accessories Article No. Accessories Article No. Rotating drum support with ball bearings, for clamping onto existing drum support, max. load 210 kg Z A Collision protection, with yellow / black safety painting and floor anchor Z A Can support, for pushing onto drum support Z A Additional grid storage level, with carrier bar R A Sump pallet made from 3 mm sheet steel Vertical and horizontal storage of liter drums Small container storage also possible Basic and extension units can be combined at will Highly stable due to plug and screw connections Height-adjustable crossbeams Max. load per crossbeam pair 600 kg All frame components galvanized, crossbeams powder-coated, RAL aluminium coloured Fixed drum supports as standard Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Rotating drum support, Article No. Z A FR3-96, Article No. R A, with optional can support 67

68 RACK BASE SUMPS FOR PALLET RACKS RACK BASE SUMPS FOR PALLET RACKS / DRUM STORAGE The storage of water-endangering and flammable substances in pallet racks is officially permitted only when these are equipped with an approved sump system. This means that existing pallet racks can be rapidly and cheaply converted into an approved storage system for hazardous goods. Made from 3 mm sheet steel Sump capacity as per WHG For the storage of water-endangering and flammable substances Available with and without grid supports Max load 1000 kg / m 2 Ground clearance 100 mm WSR-BG 13.27/360, Article No. R F If fitted with a grid support the rack base sumps can be used as a first storage level. Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Version with PE-insert Rack sump pallet without grid support for unit width (mm) Model WSR-B 13.18/360 WSR-B 13.22/360 WSR-B 13.27/360 WSR-B 13.27/660 WSR-B 13.33/660 Dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 322 Sump capacity (l) Weight (kg) Article No., painted R F R F R F R F R F Article No., fire-galvanized R F R F R F R F R F Article No., PE-insert for aggressive media R F R F R F R F R F Rack sump pallet with grid support for unit width (mm) Model WSR-BG 13.18/360 WSR-BG 13.22/360 WSR-BG 13.27/360 WSR-BG 13.27/660 WSR-BG 13.33/660 Dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 340 Sump capacity (l) Weight (kg) Article No., painted R F R F R F R F R F Article No., fire-galvanized R F R F R F R F R F Article No., PE-insert for aggressive media R F R F R F R F R F The racks shown are not included in the price! 68

69 RACK BASE SUMPS FOR PALLET RACKS RACK BASE SUMPS FOR PALLET RACKS / KTC STORAGE Made from 3 mm sheet steel Sump capacity as per WHG For the storage of water-endangering and flammable substances Available with and without grid supports Max load 1500 kg / m 2 Ground clearance 100 mm If fitted with a grid support the rack base sumps can be used as a first storage level. WSR-BG 13.27/1000, Article No. R F Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WSR-BG 13.27/1000, Article No. R F, integrated in an existing KTC rack Rack sump pallet without grid support for unit width (mm) Model WSR-B 13.18/1000 WSR-B 13.22/1000 WSR-B 13.27/1000 WSR-B 13.33/1000 Dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x x 1300 x 402 Sump capacity (l) Weight (kg) Article No., painted R F R F R F R F Article No., fire-galvanized R F R F R F R F Article No., PE-insert for aggressive media R F R F R F R F Rack sump pallet with grid support for unit width (mm) Model WSR-BG 13.18/1000 WSR-BG 13.22/1000 WSR-BG 13.27/1000 WSR-BG 13.33/1000 Dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x x 1300 x 420 Sump capacity (l) Weight (kg) Article No., painted R F R F R F R F Article No., fire-galvanized R F R F R F R F Article No., PE-insert for aggressive media R F R F R F R F The racks shown are not included in the price! 69

70 SUSPENSION SUMPS FOR PALLET RACKS SUSPENSION SUMPS FOR PALLET RACKS Ideally suitable for rapidly and cheaply equipping existing pallet racks with sumps. The suspension sumps lie on the rack crossbeams and are prevented from falling by their construction. Made from 3 mm sheet steel Approved for the storage of water-endangering substances Sump capacity as per WHG for drum storage, larger sump capacities on request With grid support Max. load 1000 kg / m 2 WSR-E 13.33/220, Article No. R E Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Also available for other rack sizes. Custom-made versions can be supplied! WSR-E 13.27/220, Article No. R E, built into an existing pallet rack Suspension sumps for unit width (mm) Model WSR-E 13.18/220 WSR-E 13.22/220 WSR-E 13.27/220 WSR-E 13.33/220 Dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x x 1300 x 145 Depth 2 (mm) Sump capacity (l) Weight (kg) Article No., painted R E R E R E R E Article No., fire-galvanized R E R E R E R E Article No., PE-insert for aggressive media R E R E R E R E The racks shown are not included in the price! 70

71 HAZARDOUS SUBSTANCES PALLET RACKS WITH SUMPS HAZARDOUS SUBSTANCES PALLET RACKS WITH SUMPS We can plan, supply and install Your hazardous substances rack unit. The type and execution will be specially designed to suit your particular requirements. This means that we ensure optimal utilisation of space while taking all the legal regulations for the substances to be stored into consideration. Pallet rack unit with built-in sumps for hazardous substances on euro-pallets Please make use of our planning service! Room or sumps exhaust systems; we can provide you with the optimal solution! Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Pallet rack unit with built-in sumps in a completely galvanized version Special corrosion protection is possible on request (e.g. for the storage of aggressive media) We will be pleased to advise you! 71

72 HAZARDOUS SUBSTANCES PALLET RACKS WITH SUMPS PALLET RACK UNITS For the storage of hazardous substances as barrelled goods on euro- or chemical pallets on 2 storage levels By the combination of pallet racks with quality marks and rack base sumps in accordance with the Water Management Act (WHG) it is possible to obtain a flexible and favourably priced storage system that can be extended at any time. Pallet rack fittings: Quality mark RAL-RG 614/2 Pallet racks Ready-mounted support frames ---> short assembly time Storage levels height-adjustable at intervals of 50 mm Galvanized support frames, powder-coated crossbeams RAL gentian blue Rack base sump fittings: Ü-sign as per steel trough guidelines Made from 3 mm sheet steel Corrosion-protected by painting in RAL sky blue or fire-galvanizing Ground clearance 100 mm G-PR 2.27/360, basic and extension units Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin G-PR 2.27/360, basic unit G-PR 2.22/360, basic and extension units By the additional use of grid supports it is also possible to store containers without a pallet! Model G-PR 2.18/360 G-PR 2.22/360 G-PR 2.27/360 Rack dimensions W x D x H (mm) 1980 x 1100 x x 1100 x x 1100 x 2500 Inner width of unit (mm) Storage levels Capacity, 200 liter drums on euro-pallets Capacity, 200 liter drums on chemical pallets Max. load (kg) Sump pallet dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x 285 Sump capacity (l) Article No., basic unit, sumps painted in RAL 5015 R B R B R B Article No., extension unit, sumps painted in RAL 5015 R B R B R B Article No., basic unit, sumps fire-galvanized R B R B R B Article No., extension unit, sumps fire-galvanized R B R B R B Accessories Article No. Article No. Article No. Push-through protection for 1 storage level R B R B R B Grid support 1000 kg/m 2 R B R B R B Collision protection corner R B R B R B 72

73 HAZARDOUS SUBSTANCES PALLET RACKS WITH SUMPS PALLET RACK UNITS For the storage of hazardous substances as barrelled goods on euro or chemical pallets on 3 storage levels Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin G-PR 3.22/360, basic unit G-PR 3.27/660, basic unit By the additional use of grid supports it is also possible to store containers without a pallet! KTC racks with sump pallets for hazardous substances can be found on page 74! Combining different unit widths allows the optimal utilisation of storage space! Model G-PR 3.18/360 G-PR 3.22/360 G-PR 3.27/660 Rack dimensions W x D x H (mm) 2000 x 1100 x x 1100 x x 1100 x 3500 Inner width of unit (mm) Storage levels Capacity, 200 liter drums on euro-pallets Capacity, 200 liter drums on chemical pallets Max. load (kg) Sump pallet dimensions W x D x H (mm) 1780 x 1300 x x 1300 x x 1300 x 357 Sump capacity (l) Article No., basic unit, sumps painted in RAL 5015 R B R B R B Article No., extension unit, sumps painted in RAL 5015 R B R B R B Article No., basic unit, sumps fire-galvanized R B R B R B Article No., extension unit, sumps fire-galvanized R B R B R B Accessories Article No. Article No. Article No. Push-through protection for 1 storage level R B R B R B Grid support 1000 kg/m 2 R B R B R B Collision protection corner R B R B R B 73

74 HAZARDOUS SUBSTANCES PALLET RACKS WITH SUMPS KTC PALLET RACKS For the storage of KTCs / IBCs or large containers Pallet rack fittings: Quality mark RAL-RG 614/2 Pallet racks Ready-mounted support frames ---> short assembly time Storage levels height-adjustable at intervals of 50 mm Galvanized support frames, powder-coated crossbeams in RAL gentian blue Rack base sump fittings: Ü-sign as per steel trough guidelines Made from 3 mm sheet steel Corrosion-protected by painting in RAL sky blue or fire-galvanizing Ground clearance 100 mm Sump capacity 1000 liter For models with 3 storage levels the base sump tray is equipped with a grid support for use as the first storage level. By the additional use of grid supports it is also possible to store various KTCs and large containers! G-KR 3.27/1000, basic unit Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Other versions available on request! G-KR 2.22/1000, basic unit G-KR 2.27/1000, basic unit Model G-KR 2.22/1000 G-KR 2.27/1000 G-KR 3.22/1000 G-KR 3.27/1000 Rack dimensions W x D x H (mm) 2380 x 1100 x x 1100 x x 1100 x x 1100 x 4500 Inner width of unit (mm) Storage levels Capacity, KTC / IBC Max. load (kg) Sump pallet dimensions W x D x H (mm) 2180 x 1300 x x 1300 x x 1300 x x 1300 x 480 Sump capacity (l) Article No., basic unit, sumps painted in RAL 5015 R B R B R B R B Article No., extension unit, sumps painted in RAL 5015 R B R B R B R B Article No., basic unit, sumps fire-galvanized R B R B R B R B Article No., extension unit, sumps fire-galvanized R B R B R B R B Accessories Article No. Article No. Article No. Article No. Push-through protection for 1 storage level R B R B R B R B Grid support 1500 kg/m 2 R B R B R B R B Collision protection corner R B R B R B R B 74

75 WATER PROTECTION COMPARTMENT CONTAINERS STANDING DRUM STORAGE INDOORS STORAGE INDOORS: Water protection compartment containers are also suitable for the storage of hazardous substances indoors. Storage can take place both directly on the grid supports of the different levels and also on euro- or chemical pallets. The compact modular design allows an uncomplicated change of location in a very short time (e.g. by using a fork-lift truck or crane). WSC-G-E.1-30, Article No. C B Approval-No.: Z General Technical Approval DIBt Berlin WSC-G-E.2-30, Article No. C B Excerpt from our range of supply: Model WSC-G-E.1-30 WSC-G-E.2-30 WSC-G-E.3-30 WSC-G-E.1-60 WSC-G-E.2-60 WSC-G-E.3-60 Number of levels External dimensions W x D x H (mm) 3130 x 1390 x x 1390 x x 1390 x x 1390 x x 1390 x x 1390 x 3630 Internal compartment dimensions W x D x H (mm) 3010 x x 1300 x x 1300 x x x 1300 x x 1300 x 1250 Sump capacity (l) x x x 650 Capacity, 200 liter drums 10 direct on 20 direct on 30 direct on 20 direct on 40 direct on 60 direct on (examples) grid support or 8 on grid support or 16 on grid support or 24 on grid support or 16 on grid support or 32 on grid support or 48 on chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or 6 on euro-pallets 12 on euro-pallets 18 on euro-pallets 12 on euro-pallets 24 on euro-pallets 36 on euro-pallets Article No. C B C B C B C B C B C B 75

76 STORAGE OF FLAMMABLE LIQUIDS Fire protection requirements according to TRbF Storage indoors: PRACTICAL INFORMATION 4 Walls, ceilings and doors of storage rooms have to be made from non-flammable construction materials. Storage rooms have to be separated fire resistantly (F90 as per DIN 4102) to adjoining rooms. Exception regulation according to TRbF 20, article 5.5: If the storage room is integrated into a fire-protection concept walls, ceilings and doors do not have to be fire-resistant. 2. Storage outdoors: For the storage outdoors hazardous substances storage systems do not have to be fire-resistant if: A sufficient safety distance of at least 10 meters to buildings can be observed or An available external building wall is carried out fire-resistantly (F90 according to DIN 4102). Exception regulation according to TRbF 20, article 6.1: For passive storage safety distance can be restricted to 3 meters if stored substances do not exceed 200 liters. For passive storage of substances from 200 liters until max liters safety distance can be restricted to 5 meters. Definition 1. Passive storage: Passive storage is the storage of flammable liquids in stock if it is neither filled nor depleted. 2. Active storage: Active storage is the storage of flammable liquids, if containers are opened for withdrawal and filling. Basic requirements (extract) Storage rooms have to be sufficiently ventilated. Ventilation has to ensure a constant 5-fold air change per hour and be effective near the ground. For exclusive passive storage of flammable liquids a 0.4-fold air change per hour is to be guaranteed. Classification of explosion-proof zones Zones Fuel type Occurrence of explosive atmosphere, period of existence 0 Gases, fumes, vapors constant, frequent, over an extended period 1 Gases, fumes, vapors occasional in standard operation 2 Gases, fumes, vapors is not expected in standard operation; in case of deviation a short-term occurrence is possible For this purpose please observe our practical information on page 144! 76

77 TABLE OF CONTENTS - SAFETY CABINETS 3. Safety cabinets... Brand quality MADE by LACONT Environmental cabinets page 78 Chemicals and poisons cabinets page Acid and alkali cabinets page Combi cabinets page Type 30 cabinets as per EN page Type 90 cabinets as per EN page Gas cylinder cabinets as per EN and TRG cells page

78 ENVIRONMENTAL CABINETS ENVIRONMENTAL CABINETS FOR STORAGE OF PESTICIDES For storage of water-endangering liquids in small containers indoors Made from high quality sheet steel Cabinets 1000 mm height with 2 storage levels Powder-coated in RAL reseda green Cabinets 1950 mm height with 4 storage levels Reinforced doors with central cylinder lock Base sump tray made from 3 mm sheet steel, with Ü-sign according to steel Height-adjustable storage levels trough guidelines Ventilations slots in the doors Bottoms of base sump trays are liquid-tight welded, max. load capacity 50 kg UWS 5/10, Article No. B A UWS 9/10, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Ideally suitable for storage of pesticides! UWS 5/19, Article No. B A UWS 9/19, Article No. B A Model UWS 5/10 UWS 5/19 UWS 9/10 UWS 9/19 External dimensions W x D x H (mm) 500 x 500 x x 500 x x 500 x x 500 x 1950 Door(s) Sump capacity (l) 1 x 30 / 1 x 20 1 x 30 / 3 x 20 1 x 30 / 1 x 20 1 x 30 / 3 x 20 Weight (kg) Article No., RAL 6011 B A B A B A B A Accessories Article No. Article No. Article No. Article No. Tray-shaped shelf, sheet steel RAL 6011 B A B A B A B A PE-insert for base sump tray, for storage of aggressive media B A B A B A B A PE-insert for tray-shaped shelf, for storage of aggressive media B A B A B A B A Reinforcement kit for load capacity 90 kg B A B A B A B A 78

79 TABLE OF CONTENTS - CHEMICALS AND POISONS CABINETS Chemicals and poisons cabinets... Brand quality MADE by LACONT Chemicals and poisons underbench cabinets and chemicals and poison cabinets height 1000 / 1300 mm.. page 80 Chemicals and poisons cabinets height 1000 / 1950 mm page Chemicals and poisons cabinets with sliding doors / pull-out trays page Chemicals and poisons apothecary cabinets page 84 Chemicals and poisons cabinets for canister page 85 Chemicals and poisons cabinets for one 60 liter drum / CHS-1FAS page 86 Chemicals and poisons cabinets for two 60 liter drums / CHS-2FAS page 87 Chemicals and poisons cabinets for one 200 liter drum / CHS-1FAS page 88 Chemicals and poisons cabinets for two 200 liter drums / CHS-2FAS page 89 Chemicals and poisons cabinets for horizontal storage of 60 liter drums page 90 79

80 CHEMICALS AND POISONS CABINETS CHS - AUS UNDERBENCH CABINETS For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock Ventilation slots in the door(s) DN 75 ventilation connection for exhaust air extraction in the back wall Base sump tray made from 3 mm powder-coated sheet steel as per 19 WHG, with Ü-sign according to steel trough guidelines Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems CHS-AUS 600, Article No. B A DIBt Berlin Model CHS-AUS 600 CHS-AUS 1100 External dimensions W x D x H (mm) 600 x 570 x x 570 x 600 Internal dimensions W x D x H (mm) 525 x 525 x x 525 x 530 Sump capacity (l) Door(s) 1 (DIN right) 2 Weight (kg) Art. No., outer body: RAL light grey B A B A CHS HEIGHT 1000 / 1300 MM CHS-AUS 1100, Article No. B A For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock Ventilation slots in the door(s) Tray-shaped shelves - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 75 ventilation connection for exhaust air extraction in the back wall With inner fittings: CHS / CHS / CHS : - 1 tray-shaped shelf (EW) for CHS / CHS ; 2 tray-shaped shelves (EW) for CHS , made from powder-coated sheet steel in RAL light grey - Base sump tray (BW), made from powder-coated sheet steel in RAL light grey as per 19 WHG with Ü-sign according to steel trough guidelines Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS , Article No. B A Model CHS CHS CHS External dimensions W x D x H (mm) 500 x 500 x x 500 x x 570 x 1315 Internal dimensions W x D x H (mm) 412 x 467 x x 467 x x 544 x 1310 Sump capacity (l) BW 1 x 30 / EW 1 x 20 BW 1 x 30 / EW 1 x 20 BW 1 x 30 / EW 2 x 20 Door(s) 1 (DIN right) 2 1 (DIN right) Weight (kg) Art. No., outer body: RAL light grey B A B A B A CHS , Article No. B A 80

81 CHEMICALS AND POISONS CABINETS For storage of harmful, water-endangering, toxic and very toxic liquids CHEMICALS AND POISONS CABINETS - HEIGHT 1950 / 1935 MM Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock - model GL with acrylic glass doors Ventilation slots in the door(s) Tray-shaped shelves - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: CHS 500 / CHS 600 / CHS 950 / CHS 950 GL / CHS 1200: - 3 tray-shaped shelves (EW), made from powder-coated sheet steel in RAL light grey - Base sump tray (BW), made from powder-coated sheet steel in RAL light grey as per 19 WHG with Ü-sign according to steel trough guidelines Extraction fans please see page 140! Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS 950, Article No. B A CHS 500, Article No. B A CHS 950 GL, Article No. B A CHS 1200, Article No. B A Model CHS 500 CHS 600 CHS 950 CHS 950 GL CHS 1200 External dimensions W x D x H (mm) 500 x 500 x x 570 x x 500 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 412 x 467 x x 544 x x 467 x x 467 x x 467 x 1844 Sump capacity (l) BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 BW 1 x 39 / EW 3 x 20 Door(s) 1 (DIN right) 1 (DIN right) 2 2 (acrylic glass doors) 2 Weight (kg) Art. No., outer body: RAL light grey B A B A B A B A B A Accessories Article No. Article No. Article No. Article No. Article No. Tray-shaped shelf, RAL 7035 B A B A B A B A B A PE-insert for base sump tray, for storage of aggressive media B A B A B A B A B A PE- insert for tray-shaped shelf, for storage of aggressive media B A B A B A B A B A Safe compartment (please see picture page 85) B A B A B A B A B A Reinforcement kit for load capacity 90 kg - - B A B A - 81

82 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS WITH SLIDING DOORS HEIGHT 1950 MM For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey 2 sliding doors with central cylinder lock Ventilation slots in the doors DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - 3 shelves - CHS 950 ST / CHS 1200 ST resp. 2 x 4 shelves - CHS 1800 ST, non-tilt, height-adjustable at intervals of 25 mm, max. load 50 kg - 1 base sump tray (BW) - CHS 950 ST / CHS 1200 ST resp. 2 base sump trays (BW) - CHS 1800 ST, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel trough guidelines CHS 1200 ST, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS 1800 ST, Article No. B A Model CHS 950 ST CHS 1200 ST CHS 1800 ST External dimensions W x D x H (mm) 950 x 500 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 936 x 435 x x 435 x x 435 x 1845 Sump capacity (l) BW 1 x 30 BW 1 x 30 BW 2 x 30 Sliding doors Weight (kg) Outer body: RAL light grey Art. No., doors: RAL light grey B A B A B L Art. No., doors: RAL zinc yellow - - B A Accessory Article No. Article No. Article No. Shelf, RAL light grey B A B A B A CHS 950 ST, Article No. B A 82

83 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS WITH PULL-OUT TRAYS HEIGHT 1950 / 1935 MM For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock DN 80 ventilation connection for exhaust air extraction on cabinet roof Ventilation slots in the door(s) With inner fittings: - 1 tray-shaped shelf (EW), non-tilt, height-adjustable at intervals of 25 mm, max. load 50 kg - 2 pull-out trays (AW) with full extension, max. load 50 kg - Base sump tray (BW) made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel trough guidelines CHS 600 VS, Article No. B A CHS 1200 VS, Article No. B A CHS 950 VS, Article No. B A Model CHS 600 VS CHS 950 VS CHS 1200 VS External dimensions W x D x H (mm) 600 x 570 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 512 x 544 x x 467 x x 467 x 1844 Sump capacity (l) BW 1 x 30 / AW 2 x 20 / BW 1 x 30 / AW 2 x 20 / BW 1 x 30 / AW 2 x 20 / EW 1 x 20 EW 1 x 20 EW 1 x 20 Wing doors Weight (kg) Art. No., outer body: RAL light grey B A B A B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Accessories Article No. Article No. Article No. Tray-shaped shelf, sheet steel RAL 7035 B A B A B A Pull-out tray, sheet steel RAL 7035 B A B A B A PE-insert for base sump tray, for storage of aggressive media B A B A B A PE- insert for tray-shaped shelf, for storage of aggressive media B A B A B A Safe compartment (please see picture page 85) B A B A B A 83

84 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS APOTHECARY CABINETS For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock Ventilation slots near the floor Tray-shaped shelves, non-tilt - max. load 20 kg / shelf, - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof CHS-APO 600, Article No. B A With inner fittings, per pull-out door: - 4 tray-shaped shelves (EW), powder-coated sheet steel in RAL light grey - Base sump tray (BW), powder-coated sheet steel in RAL light grey CHS-APO 2400, Article No. B A Model CHS-APO 600 CHS-APO 1200 CHS-APO 1800 CHS-APO 2400 External dimensions W x D x H (mm) 600 x 500 x x 500 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 475 x 435 x x 475 x 435 x x 475 x 435 x x 475 x 435 x 1800 Sump capacity (l) BW 1 x 20 / EW 4 x 10 BW 2 x 20 / EW 8 x 10 BW 3 x 20 / EW 12 x 10 BW 4 x 20 / EW 16 x 10 Pull-out door(s) Weight (kg) Art. No., outer body: RAL light grey B A B A B A B A Accessories Article No. Article No. Article No. Article No. Tray-shaped shelf RAL 7035 B A B A B A B A PE-insert for base sump tray, for storage of aggressive media B A B A B A B A PE-insert for tray-shaped shelf, for storage of aggressive media B A B A B A B A Non-slip mat for base sump tray or tray-shaped shelf B A B A B A B A 84

85 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR CANISTER For storing / filling of canisters containing harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock Ventilation slots in the door(s) Tray-shaped shelves - non-tilt, max. load 70 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: CHS-KAN 950 / CHS-KAN 950 GL: - 3 tray-shaped shelves (EW), powder-coated sheet steel in RAL light grey with perforated cover plate; Tray-shaped shelves (EW) with refilling device (either suitable for 5 x 5 liter or 4 x 10 liter or 3 x 20 liter canister) - Base sump tray (BW), made from powder-coated sheet steel, 3 mm, in RAL light grey, with perforated cover plate, as per 19 WHG, with Ü-sign according to steel trough guidelines - With integrated fold-out drip protection to lead drip loss into base sump tray while filling CHS-KAN 950, Article No. B A, canister set is not included Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS-KAN 950 GL, Art. No. B A, canister set is not included and safe compartment optional Model CHS-KAN 950 CHS-KAN 950 GL External dimensions W x D x H (mm) 950 x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 862 x 467 x x 467 x 1844 Sump capacity (l) BW 1 x 30 / EW 3 x 20 BW 1 x 30 / EW 3 x 20 Wing doors 2 2 (acrylic glass doors) Weight (kg) Art. No., outer body: RAL light grey B A B A Accessories Article No. Article No. Tray-shaped shelf, sheet steel RAL 7035 with perforated cover plate B A B A PE-insert for base sump tray, for storage of aggressive media B A B A PE- insert for tray-shaped shelf, for storage of aggressive media B A B A CHS-KAN 950, Art. No. B A, canister set is not included Safe compartment B A B A 85

86 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR ONE 60 LITER DRUM / CHS-1FAS 950 For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door(s) with central cylinder lock Ventilation slots in the doors Shelves - mounted, max. load 20 kg / shelf - height interval 275 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - with four shelves (EB), powder-coated sheet steel, in RAL light grey - Base sump tray (BW), sump capacity 65 liters, with grid as storage level, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel troughs guidelines - Rail to fix accessories CHS-1FAS 950, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS-1FAS 950, Article No. B A CHS-1FAS 950 GL, Article No. B A Model CHS-1FAS 950 CHS-1FAS 950 GL External dimensions W x D x H (mm) 950 x 500 x x 500 x 1950 Internal dimensions W x D x H (mm)* 862 x 467 x x 467 x 1660 Sump capacity (l) BW 1 x 65 BW 1 x 65 Double-winged doors 2 2 ( acrylic glass) Capacity 1 x 60 liter drum + small containers 1 x 60 liter drum + small containers Weight (kg) Art. No., outer body: RAL light grey B A B A * Height from top level grid Accessory Article No. Article No. PE-insert for base sump tray, for storage of aggressive media B A B A 86

87 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR TWO 60 LITER DRUMS / CHS-2FAS 950 For storage of harmful, water-endangering, toxic and very toxic liquids Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Doors with central cylinder lock Ventilation slots in the doors Tray-shaped shelf - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - 1 tray-shaped shelf (EW), powder-coated sheet steel in RAL light grey - Base sump tray (BW), sump capacity 65 liters, with grid as storage level, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel troughs guidelines CHS-2FAS 950 GL, Article No. B A, with optional safe compartment Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS-2FAS 950, Article No. B A CHS-2FAS 950 GL, Article No. B A, with additional tray-shaped shelf Model CHS-2FAS 950 CHS-2FAS 950 GL External dimensions W x D x H (mm) 950 x 500 x x 500 x 1950 Internal dimensions W x D x H (mm)* 862 x 467 x x 467 x 1660 Sump capacity (l) BW 1 x 65 / EW 1 x 20 BW 1 x 65 / EW 1 x 20 Double-winged doors 2 2 (acrylic glass) Capacity 2 x 60 liter drum + small containers 2 x 60 liter drum + small containers Weight (kg) Art. No., outer body: RAL light grey B A B A * Height from top level grid Accessory Article No. Article No. Tray-shaped shelf, sheet steel RAL 7035 B A B A PE-insert for base sump tray, for storage of aggressive media B A B A PE-insert for tray-shaped shelf, for storage of aggressive media B A B A Safe compartment B A B A 87

88 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR ONE 200 LITER DRUM / CHS-1FAS For storage of harmful, water-endangering, toxic and very toxic liquids S ingle-wall body made from high-quality powder-coated sheet steel in RAL light grey / doors RAL sky blue Doors with central cylinder lock Ventilation slots in the doors Tray-shaped shelf - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - 1 tray-shaped shelf (EW), powder-coated sheet steel in RAL light grey - Base sump tray (BW), sump capacity 220 liters, with grid as storage level, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel troughs guidelines CHS-1FAS , Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS-1FAS , Article No. B A Model CHS-1FAS External dimensions W x D x H (mm) 950 x 660 x 1950 Internal dimensions W x D x H (mm)* 862 x 618 x 1500 Sump capacity (l) BW 1 x 220 / EW 1 x 20 Double-winged doors 2 Capacity 1 x 200 liter drum + small containers Weight (kg) 135 Art. No., outer body: RAL light grey, doors: RAL sky blue B A * Height from top level grid Accessories PE-insert for base sump tray, for storage of aggressive media Tray-shaped shelf PE-insert for tray-shaped shelf Article No. B A B A B A CHS-1FAS , Article No. B A 88

89 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR TWO 200 LITER DRUMS / CHS-2FAS 1500 For storage of harmful, water-endangering, toxic and very toxic liquids S ingle-wall body made from high-quality powder-coated sheet steel in RAL light grey / doors RAL sky blue Doors with central cylinder lock Ventilation slots in the doors Tray-shaped shelf - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - 1 tray-shaped shelf (EW), powder-coated sheet steel in RAL light grey - Base sump tray (BW), sump capacity 220 liters, with grid as storage level, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel troughs guidelines CHS-2FAS 1500, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin CHS-2FAS 1500, Article No. B A Model CHS-2FAS 1500 External dimensions W x D x H (mm) 1500 x 660 x 1950 Internal dimensions W x D x H (mm)* 1475 x 618 x 1694 Sump capacity (l) BW 1 x 220 Double-winged doors 2 Capacity 2 x 200 liter drum + small containers Weight (kg) 145 Art. No., outer body: RAL light grey, doors: RAL sky blue B A * Height from top level grid Accessories PE-insert for base sump tray, for storage of aggressive media Tray-shaped shelf Pull-out tray Article No. B A B H B A CHS-2FAS 1500, Article No. B A 89

90 CHEMICALS AND POISONS CABINETS CHEMICALS AND POISONS CABINETS FOR HORIZONTAL STORAGE OF 60 LITER DRUMS For storage of harmful, water-endangering, toxic and very toxic liquids S ingle-wall body made from high-quality powder-coated sheet steel in RAL light grey / doors RAL sky blue Doors with central cylinder lock Ventilation slots in the doors DN 80 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: - Built-in shelving with 3 storage levels, optionally with 60 liter drum support or grid level for small containers - All shelving parts galvanized - Height-adjustable storage levels at intervals of 25 mm - Base sump tray (BW), sump capacity 65 liters, made from 3 mm powder-coated sheet steel as per 19 WHG, with Ü-sign according to steel trough guidelines - With integrated fold-out drip protection to lead drip loss into base sump tray while filling CHS-FAS GR, Article No. B A CHS-FAS , Article No. B A CHS-FAS GR, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin Model CHS-FAS GR CHS-FAS R CHS-FAS GR CHS-FAS External dimensions W x D x H (mm) 950 x 698 x x 698 x x 698 x x 698 x 1950 Internal dimensions W x D x H (mm) 862 x 656 x x 656 x x 656 x x 656 x 1945 Sump capacity base sump tray (l) Double-winged doors Capacity 60 liter steel drums lying Grid level for storage of small containers Weight (kg) Article No., outer body: RAL light grey, doors: RAL sky blue B A B A B A B A CHS-FAS R, Article No. B A 90

91 CONTENTS ACID AND ALKALI CABINETS Acid and alkali cabinets... Brand quality MADE by LACONT Acid and alkali fume cupboard underbench cabinets.. page 92 Acid and alkali corner cabinets page 92 Acid and alkali cabinets height 1935 mm width 600 mm page 93 Acid and alkali cabinets height 1935 mm width 1200 mm page Acid and alkali cabinets height 1935 mm made of PVC width 600 mm page 96 91

92 ACID AND ALKALI CABINETS SLS - FUME CUPBOARD UNDERBENCH CABINETS For storage of acids and alkalis Body made from HPL-coated sheets - particularly impact, scratch and abrasion proof Color RAL light grey Inner body / inner fittings completely made from corrosion-proof components Doors with separate cylinder locks Marked with warning symbols W03 / W04 DN 75 ventilation connection for exhaust air extraction in the back wall Supply air by ventilation grille SLS-AUS 1100 with center partition wall With inner fittings: 1 (SLS-AUS 600) pull-out shelf, or 2 (SLS-AUS 1100) pull-out shelves, with end stop, arranged side by side Max. load 20 kg / shelf Front edge of shelves in attractive solid wood design PE sump tray (sump capacity 20 liters) on shelf secured against slipping - easy to remove SLS-AUS 600, Art. No. B A SLS-AUS 1100, Article No. B A Model SLS-AUS 600 SLS-AUS 1100 External dimension W x D x H (mm) 600 x 570 x x 570 x 600 Pull-out shelves 1 2 Usable inner shelf height (mm) 1 x x 495 Door(s) 1 2 Weight (kg) Door hinge Art. No., outer body: left B A RAL light grey right B A B A Accessories Article No. Article No. Extra pull-out shelf as 2nd storage level B A B A Socle height 35 mm B A B A SLS - CORNER CABINETS Description as for SLS fume cupboard underbench cabinets With inner fittings: Fully rotating turntable with 2 (SLS-ECK 1) or. 4 (SLS-ECK 2) PE sump trays (ø 695 mm) max. load 20 kg per tray sump capacity 11 liters per tray SLS-ECK 1, Article No. B A Model SLS-ECK 1 SLS-ECK 2 External dimension W x D x H (mm) 900 x 900 x x 900 x 1480 PE sump trays 2 4 Usable inner shelf height (mm) 1 x 300 / 1 x x 280 / 2 x 245 Door(s) 1 (DIN left) 2 (DIN left) Weight (kg) SLS-ECK 2, Article No. B A Art. No., outer body: RAL light grey B A B A 92

93 ACID AND ALKALI CABINETS SLS - CABINETS - WIDTH 600 MM For storage of acids and alkalis Body made from HPL-coated sheets - particularly impact, scratch and abrasion proof Color RAL light grey Inner body / inner fittings completely made from corrosion-proof components Doors with separate cylinder locks Marked with warning symbols W03 / W04 Leveling feet for installing cabinet horizontally With central horizontal division for storage of acids and alkalis in separate compartments Supply air by ventilation grille in the back wall DN 75 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: Pull-out shelves (to full extent) with end stop Max. load 20 kg / shelf Front edge of shelves in attractive solid wood design PE sump tray (sump capacity 20 liters) on shelf secured against slipping - easy to remove Model SLS 600 GL/3-SF3 additionally with full extent pull-out drawers with built-in PE sump trays (sump capacity 20 liters) SLS 600/4, Article No. B D SLS 600 GL/3-SF3, Article No. B D Combination SLS 600 GL/6, Article No. B D Model SLS 600/4 SLS 600/6 SLS 600 GL/4 SLS 600 GL/6 SLS 600 GL/3-SF3 External dimension W x D x H (mm) 600 x 600 x x 600 x x 600 x x 600 x x 600 x 1935 Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3 3 Usable inner shelf height (mm) 4 x x 275 / 2 x x x 275 / 2 x x 275 / 1 x 248 Drawers Usable inner drawer height (mm) x 255 / 1 x 275 / 1 x 250 Doors ( acrylic glass doors) 2 ( acrylic glass doors) 1 ( acrylic glass door) Weight (kg) Door hinge Art. No., outer body: left B D B D B D B D B D RAL light grey right B D B D B D B D B D Accessory Pull-out shelf Article No. B A 93

94 ACID AND ALKALI CABINETS SLS - CABINETS WIDTH 1200 MM For storage of acids and alkalis Body made from HPL-coated sheets - particularly impact, scratch and abrasion proof Color RAL light grey Inner body / inner fittings completely made from corrosion-proof components Doors with separate cylinder locks Marked with warning symbols W03 / W04 Leveling feet for installing cabinet horizontally With central horizontal and vertical divisions for storage of acids and alkalis in 4 separate compartments Model SLS 1200 GL with acrylic glass doors Air supply by ventilation grille in the back wall DN 75 ventilation connection for exhaust air extraction on cabinet roof Extraction fans please see page 140! With inner fittings: Pull-out shelves (to full extent) with end stop Max. load 20 kg per shelf Front edge of shelves in attractive solid wood design PE sump tray (sump capacity 20 liters) on shelf secured against slipping - easy to remove SLS 1200 GL/12, Article No. B D Model SLS 1200/8 SLS 1200/12 SLS 1200 GL/8 SLS 1200 GL/12 External dimensions W x D x H (mm) 1200 x 600 x x 600 x x 600 x x 600 x 1935 Pull-out shelves 4 x 2 4 x 3 4 x 2 4 x 3 Usable inner shelf height (mm) 8 x x 275 / 4 x x x 275 / 4 x 248 Doors ( acrylic glass doors) 4 ( acrylic glass doors) Weight (kg) Article No., outer body: RAL light grey B D B D B D B D SLS 1200/12, Article No. B D Accessory Pull-out shelf Article No. B A SLS 600/4, Art. No. B D (p.93) 2 SLS 600 GL/3-SF3, Art. No. B D (p.93) 5 SLS-ECK 2, Art. No. B A (p.92) 3 SLS 1200/6-SF6, Art. No. B D (p.95) 6 SLS 1200 GL/6-SF6, Art. No. B D (p.95) 4 SLS 1200 GL/12, Art. No. B D (p.94) 7 SLS 1200/12, Art. No. B D (p.94) 94

95 ACID AND ALKALI CABINETS SLS - CABINETS WIDTH 1200 MM For storage of acids and alkalis Body made from HPL-coated sheets - particularly impact, scratch and abrasion proof Color RAL light grey Inner body / inner fittings completely made from corrosion-proof components Doors with separate cylinder locks, 6 drawers in lower part Marked with warning symbols W03 / W04 Leveling feet for installing cabinet horizontally With central horizontal and vertical divisions for storage of acids and alkalis in 4 separate compartments Model SLS 1200 GL with acrylic glass doors Supply air by ventilation grille in the back wall DN 75 ventilation connection for exhaust air extraction on cabinet roof With inner fittings: Pull-out shelves (to full extent) with end stop Max. load 20 kg per shelf Front edge of shelves in attractive solid wood design PE sump tray (sump capacity 20 liters) on shelf secured against slipping - easy to remove Pull-out drawers (to full extent) with end stop Max. load 20 kg per drawer PE sump tray (sump capacity 20 liters) in drawer secured against slipping - easy to remove SLS 1200 GL/6-SF6, Article No. B D Pull-out drawer with end stop SLS 1200 GL/6-SF6, Art. No. B D SLS 1200/6-SF6, Article No. B D Model SLS 1200/4-SF 6 SLS 1200/6-SF6 SLS 1200 GL/4-SF6 SLS 1200 GL/6-SF6 External dimensions W x D x H (mm) 1200 x 600 x x 600 x x 600 x x 600 x 1935 Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3 Usable inner shelf height (mm) 4 x x 275 / 2 x x x 275 / 2 x 248 Drawers Usable inner drawer height (mm) 2 x 255 / 2 x 275 / 2 x x 255 / 2 x 275 / 2 x x 255 / 2 x 275 / 2 x x 255 / 2 x 275 / 2 x 250 Doors ( acrylic glass doors) 2 ( acrylic glass doors) Weight (kg) Article No., outer body: RAL light grey B D B D B D B D Accessory Pull-out shelf Article No. B A 95

96 ACID AND ALKALI CABINETS SLS - CABINETS MADE FROM PVC - SLS-P 600 For storage of acids and alkalis Body made from PVC-coated sheets - particularly impact, scratch and abrasion proof Color: outer body white / blue edges Inner body / inner fittings complete made from corrosion-proof components Doors with separate cylinder locks Marked with warning symbols W03 / W04 Leveling feet for installing cabinet horizontally With central horizontal division for storage of acids and alkalis in separate compartments Supply air by ventilation grille in the back wall DN 75 ventilation connection for exhaust air extraction on cabinet roof SLS-P 600 GL/6, Article No. B D SLS-P 600 GL/6, Article No. B D SLS-P 600/4, Article No. B D With inner fittings: Pull-out shelves (to full extent) with end stop Max. load 20 kg / shelf PE sump tray (sump capacity 20 liters) on shelf secured against slipping - easy to remove Model SLS-P 600/4 SLS-P 600/6 SLS-P 600 GL/4 SLS-P 600 GL/6 External dimensions W x D x H (mm) 600 x 600 x x 600 x x 600 x x 600 x 1935 Pull-out shelves 2 x 2 2 x 3 2 x 2 2 x 3 Usable inner shelf height (mm) 4 x x 275 / 2 x x x 275 / 2 x 248 Double-winged doors ( acrylic glass doors) 2 (acrylic glass doors) Weight (kg) Door hinge Article No., left B D B D B D B D outer body: white right B D B D B D B D Accessory Pull-out shelf Article No. B D 96

97 CONTENTS COMBI CABINETS Combi cabinets... Brand quality MADE by LACONT Chemicals and poisons cabinets for small containers with safety box page 98 Chemicals and poisons cabinets for 60 liter drums with safety box page 99 Hazardous substances cabinets as per EN width 600 mm - KombiLAB page 100 Hazardous substances cabinets as per EN width 1200 mm - KombiLAB page PRACTICAL INFORMATION on EN and TRbF 20-L page Safety cabinets brand quality made by LACONT page

98 CHEMICALS AND POISONS CABINETS CHEMICALS CABINETS FOR SMALL CONTAINERS WITH SAFETY BOX For storage of harmful, water-endangering, toxic and very toxic liquids also for storage of flammable liquids as per EN / TRbF 20-L Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Doors with central cylinder lock Ventilation slots in the doors Tray-shaped shelves - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm Whole construction tested and approved by an authorized materials testing institute as per EN (type 30 / type 60) with a fire resistance capability of >30 and >60 minutes for the small safety cabinet Small safety cabinet with separate cylinder lock Central DN 80 ventilation connection for exhaust air extraction of both cabinets on roof Ground connection in accordance with BGR 132 (avoidance of sources of ignition) With inner fittings: CHS 950 / SiB 30 / CHS 950 / SiB 60: - Made of powder-coated sheet steel in RAL light grey - Model GL with acrylic glass doors Chemical cabinet - 3 x tray-shaped shelves (EW) Safety box as per EN Base sump tray (BW) sump capacity 11 liters - Usable dimensions W x D x H (mm) = 750 x 325 x Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) CHS 950 / SiB 30, Article No. B A EN EN Model CHS 950 / SiB 30 CHS 950 / SiB 60 CHS 950 GL / SiB 30 CHS 950 GL / SiB 60 External dimensions W x D x H (mm) 950 x 500 x x 500 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 862 x 467 x x 467 x x 467 x x 467 x 1240 Sump capacity (l) - EW / BW 3 x 20 / 1 x 11 3 x 20 / 1 x 11 3 x 20 / 1 x 11 3 x 20 / 1 x 11 Doors ( acrylic glass doors) 2 ( acrylic glass doors) Weight (kg) Art. No., outer body: RAL light grey B A B A B A B A Accessories Article No. Article No. Article No. Article No. Tray-shaped shelf, sheet steel RAL 7035 B A B A B A B A PE-insert for tray-shaped shelf, for storage of aggressive media B A B A B A B A Perforated tray-cover for sump tray of small safety cabinet B A B A B A B A CHS 950 GL / SiB 30, Article No. B A Extraction fans please see page 140! 98

99 CHEMICALS AND POISONS CABINETS CHEMICALS CABINETS FOR 60 LITER DRUMS WITH SAFETY BOX For storage of harmful, water-endangering, toxic and very toxic liquids also for storage of flammable liquids as per EN / TRbF 20-L Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Doors with central cylinder lock Ventilation slots in the doors Tray-shaped shelves - non-tilt, max. load 50 kg / shelf - height-adjustable at intervals of 25 mm Whole construction tested and approved by an authorized materials testing institute as per EN (type 30 / type 60) with a fire resistance capability of >30 and >60 minutes for the small safety cabinet Small safety cabinet with separate cylinder lock Central DN 80 ventilation connection for exhaust air extraction of both cabinets on roof Ground connection in accordance with BGR 132 (avoidance of sources of ignition) CHS 950-2FAS / SiB 30, Article No. B A CHS 950-2FAS GL / SiB 30, Art. No. B A EN EN With inner fittings: CHS 950-2FAS / SiB 30 / CHS 950-2FAS / SiB 60: - Made from powder-coated sheet steel in RAL light grey - Model GL with acrylic glass doors Chemical cabinet - 1 x tray-shaped shelf (EW) - Base sump tray (BW), sump capacity 65 liters, with grid as storage level, made from 3 mm powder-coated sheet steel in RAL light grey as per 19 WHG, with Ü-sign according to steel troughs guidelines Safety box as per EN Base sump tray (BW), sump capacity 11 liters - Usable dimensions W x D x H (mm) = 750 x 325 x Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Model CHS 950-2FAS / SiB 30 CHS 950-2FAS / SiB 60 CHS 950-2FAS GL / SiB 30 CHS 950-2FAS GL / SiB 60 External dimensions W x D x H (mm) 950 x 500 x x 500 x x 500 x x 500 x 1950 Internal dimensions W x D x H (mm) 862 x 467 x x 467 x x 467 x x 467 x 1240 Sump capacity (l) - EW / BW / BW 1 x 20 / 1 x 65 / 1 x 11 1 x 20 / 1 x 65 / 1 x 11 1 x 20 / 1 x 65 / 1 x 11 1 x 20 / 1 x 65 / 1 x 11 Doors ( acrylic glass doors) 2 ( acrylic glass doors) Weight (kg) Art. No., outer body: RAL light grey B A B A B A B A Accessories Article No. Article No. Article No. Article No. Tray-shaped shelf, sheet steel RAL 7035 B A B A B A B A PE-insert for tray-shaped shelf, for storage of aggressive media B A B A B A B A Perforated tray-cover for sump tray of small safety cabinet B A B A B A B A 99

100 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 30 / 600 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 30) and TRbF 20 - L, toxic and very toxic substances, acids and alkalis. Ideal combination for storage of various hazardous substances in a very small space. 1 Safety cabinet Whole construction tested and approved by an authorized materials testing institute as per EN (type 30) with a fire resistance >30 minutes Body made from B1 material RAL light grey, doors either in RAL light grey or RAL daffodil yellow Height-adjustable shelves at intervals of 32 mm Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard (door hinged left on request) 1 2 SiS Type 30 / 600 KL3, Article No. B A With inner fittings: SiS Type 30 / 600 KL3, Article No. B A 2 1 EN Extraction fans please see page 140! 1 2 Storage cabinet for flammable liquids type 30 as per EN x base sump tray (sump capacity 23 liters) - 1 x perforated base tray cover as 1st storing level - 2 x shelf - Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Poison compartment with acrylic glass door - Dividing shelf or rotating turntable Model SiS Type 30 / 600 KL3 SiS Type 30 / 600 KL4 External dimensions W x D x H (mm) 595 x 600 x x 600 x 1935 Doors 2 2 Poison compartment Dividing shelf 1 - Rotating turntable - 1 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door safety cabinet (type 30): RAL light grey sheet steel B A B A Art. No., door safety cabinet (type 30): RAL daffodil yellow sheet steel B A B A 100

101 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 30 / 1200 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 30) and TRbF 20 - L, toxic and very toxic substances, acids and alkalis. Ideal combination for storage of various hazardous substances in a very small space. 1 Safety cabinet Whole construction tested and approved by an authorized materials testing institute as per EN (type 30) with a fire resistance >30 minutes Body made from B1 material RAL light grey, doors either in RAL light grey or RAL daffodil yellow Height-adjustable shelves at intervals of 32 mm Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) EN DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard SiS Type 30 / 1200 KL4, Article No. B A With inner fittings: Storage cabinet for flammable liquids type 30 as per EN x base sump tray (sump capacity 23 liters) - 1 x perforated base tray cover as 1st storing level - 2 x shelf - Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE Poison compartment with acrylic glass door - Dividing shelf Extraction fans please see page 140! SiS Type 30 / 1200 KL6 GL, Article No. B A Model Type 30 / 1200 KL4 Type 30 / 1200 KL5 Type 30 / 1200 KL6 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet pull-out shelves usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door safety cabinet (type 30): RAL light grey sheet steel B A B A B A Art. No., door safety cabinet (type 30): RAL daffodil yellow sheet steel B A B A B A *) plus cover panel: height 110 mm 101

102 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 600 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L, toxic and very toxic substances, acids and alkalis. Ideal combination for storage of various hazardous substances in a very small space. 1 Safety cabinet Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance of >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey Inner body made from HPL coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Shelf height-adjustable at intervals of 64 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even with exhaust air connection) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock 1 2 SiS Type 90 / 600 KL2, Article No. B A With inner fittings: 2 1 EN Extraction fans please see page 140! 1 2 Storage cabinet for flammable liquids type 90 as per EN x base sump tray (sump capacity 22 liters) - 1 x perforated base tray cover as 1st storing level - 2 x shelf - With automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Poison compartment with acrylic glass door - Dividing shelf or - Fully rotating turntable SiS Type 90 / 600 KL1, Article No. B A Model SiS Type 90 / 600 KL1 SiS Type 90 / 600 KL2 External dimensions W x D x H (mm) 595 x 600 x x 600 x 1935 Wing doors 2 2 Poison compartment Shelf 1 - Rotating turntable - 1 Weight (kg) Door hinge Material inner fittings Art.-No., outer body: left sheet steel B A B A RAL light grey right sheet steel B A B A 102

103 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF-L, toxic and very toxic substances, acids and alkalis. Ideal combination for the storage of various hazardous substances in a very small space. Central DN 80 ventilation connection for exhaust air extraction of all storage segments on cabinet roof Safety cabinet (type 90) for flammable liquids Whole construction tested and approved by an authorized materials testing Institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets in RAL light grey Stainless steel base plate - Niro Rhombus Shelf height-adjustable at intervals of 64 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock 2 SiS Typ 90 / 1200 KL1, Article No. B A 1 With inner fittings: Storage cabinet for flammable liquids type 90 as per EN x base sump tray (sump capacity 22 liters) - 1 x perforated base tray cover as 1st storing level - 2 x shelf - Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE - Model GL with acrylic glass doors Poison compartment with acrylic glass door - Dividing shelf Cover panel made from HPL-coated sheets in RAL light grey EN Extraction fans please see page 140! SiS Type 90 / 1200 KL3 GL, Article No. B A Model Type 90 / 1200 KL1 Type 90 / 1200 KL2 Type 90 / 1200 KL3 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet Pull-out shelves Usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door safety cabinet (type 90): RAL light grey sheet steel B A B A B A Art. No., door safety cabinet (type 90): RAL daffodil yellow sheet steel B A B A B A *) plus cover panel: height 110 mm 103

104 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF-L, toxic and very toxic substances, acids and alkalis. Ideal combination for the storage of various hazardous substances in a very small space. Central DN 80 ventilation connection for exhaust air extraction of all storage segments on cabinet roof. 3 1 Safety cabinet (type 90) for flammable liquids Whole construction tested and approved by an authorized materials testing Institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets in RAL light grey Stainless steel base plate - Niro Rhombus Shelf height-adjustable at intervals of 64 mm DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock 2 SiS Type 90 / 1200 KL7, Article No. B A 1 With inner fittings: Storage cabinet for flammable liquids type 90 as per EN x base sump tray (sump capacity 22 liters) - 1 x perforated base tray cover as 1st storing level - 3 x shelf - Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE - Model GL with acrylic glass doors Cover panel made from HPL-coated sheets in RAL light grey EN SiS Type 90 / 1200 KL9 GL, Article No. B A Model Type 90 / 1200 KL7 Type 90 / 1200 KL8 Type 90 / 1200 KL9 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet Pull-out shelves Usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door safety cabinet (type 90): RAL light grey sheet steel B A B A B A Art. No., door safety cabinet (type 90): RAL daffodil yellow sheet steel B A B A B A *) plus cover panel: height 110 mm 104

105 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 KL - KOMBILAB Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF-L, toxic and very toxic substances, acids and alkalis. Ideal combination for the storage of various hazardous substances in a very small space. Central DN 80 ventilation connection for exhaust air extraction of all storage segments on cabinet roof. 3 1 Safety cabinet (type 90) for flammable liquids Whole construction tested and approved by an authorized materials testing Institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets in RAL light grey Stainless steel base plate - Niro Rhombus Pull-out shelves with automatic return ensure great working safety DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock 2 SiS Type 90 / 1200 KL10, Article No. B A 1 With inner fittings: Storage cabinet for flammable liquids type 90 as per EN x pull-out shelves - Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE - Model GL with acrylic glass doors Cover panel made from HPL-coated sheets in RAL light grey Extraction fans please see page 140! EN SiS Type 90 / 1200 KL10, Article No. B A Model Type 90 / 1200 KL10 Type 90 / 1200 KL11 Type 90 / 1200 KL12 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet Pull-out shelves Usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door safety cabinet (type 90): RAL light grey sheet steel B A B A B A Art. No., door safety cabinet (type 90): RAL daffodil yellow sheet steel B A B A B A *) plus cover panel: height 110 mm 105

106 HAZARDOUS SUBSTANCES CABINETS 1200 KL - KOMBILAB For the storage of hazardous, water-endangering, toxic and very toxic substances, acids and alkalis. Ideal combination for the storage of various hazardous substances in a very small space. Central DN 80 ventilation connection for exhaust air extraction of all storage segments on cabinet roof Chemicals cabinet Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door with central cylinder lock Ventilation slots in the door Tray-shaped shelves - non-tilt, max. load capacity 50 kg - height-adjustable at intervals of 25 mm 2 1 Extraction fans please see page 140! 1200 KL13, Article No. B A 4 With inner fittings: Chemicals cabinet - 1 x base sump tray (sump capacity 30 liters) - 2 x tray-shaped shelves (sump capacity 20 liters) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE - Model GL with acrylic glass doors Poison compartment with acrylic glass door - Dividing shelf Cover panel made from HPL-coated sheets in RAL light grey Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 1200 KL15 GL, Article No. B A Model 1200 KL KL KL15 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet Pull-out shelves Usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Material inner fittings Art. No., outer body: RAL light grey sheet steel B A B A B A *) plus cover panel: height 110 mm 106

107 HAZARDOUS SUBSTANCES CABINETS 1200 KL - KOMBILAB For the storage of hazardous, water-endangering, toxic and very toxic substances, acids and alkalis. Ideal combination for the storage of various hazardous substances in a very small space. Central DN 80 ventilation connection for exhaust air extraction of all storage segments on cabinet roof. 3 1 Chemicals cabinet Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Door with central cylinder lock Ventilation slots in the door Tray-shaped shelves - non-tilt, max. load capacity 50 kg - height-adjustable at intervals of 25 mm 2 1 Extraction fans please see page 140! 1200 KL16, Article No. B A 3 With inner fittings: Chemicals cabinet - 1 x base sump tray (sump capacity 30 liters) - 3 x tray-shaped shelves (sump capacity 20 liters) Storage cabinet for acids and alkalis - 2 x 2 or 2 x 3 pull-out tray-shaped shelves, made from white PE - Model GL with acrylic glass doors Cover panel made from HPL-coated sheets in RAL light grey Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 1200 KL18 GL, Article No. B A Model 1200 KL KL KL18 GL External dimensions* W x D x H (mm) 1195 x 600 x x 600 x x 600 x 1935 Doors Design of acid / alkali cabinet Pull-out shelves Usable inner height (mm) 4 x x 275 / 2 x x 275 / 2 x 248 Weight (kg) Material inner fittings Art. No., outer body: RAL light grey sheet steel B A B A B A *) plus cover panel: height 110 mm 107

108 PRACTICAL INFORMATION ON EN PRACTICAL INFORMATION 5 What has changed by the introduction of EN (Safety cabinets for flammable liquids)? After the European standard EN came into force in 2004 changes arised for users and manufacturers of safety cabinets which had to be implement Europe-wide for the first time: The classification of fire resistance was set to 4 types: Type 15 = 15 minutes Type 30 = 30 minutes Type 60 = 60 minutes Type 90 = 90 minutes As in Germany safety cabinets type 15 minutes are not approved and safety cabinets types 30 minutes and 60 minutes are only of limited use, in Germany safety cabinets are confirmed with a fire resistance of 90 minutes (type 90) as a state of the art. In many other European countries, however, is due to lack of legal regulations, the use of other type classes also possible. Therefore we also have safety cabinets of lower type classes in our product range, but only designed for export. Fig.: SiS Type 30 / 1200 ( 30 minutes) for export (type-approved) Construction and testing of safety cabinets: Protective goals: The type examination of the entire cabinet construction area in a fire chamber of an independent materials testing institute (flame impingement) is in accordance with European standard test conditions. Deviations without comparative tests are limited to a reduction in height and width to a maximum of 100 mm and reduction in the depth of 150 mm. Sufficient escape time for the employees in the working area. Firefighters and rescue teams must have a plenty of time to get into the working area before the hazardous substances stored in a safety cabinet turn a small erasable fire into an uncontrollable one. Development and construction Examination by an independent materials testing institute Approval / certificates 108

109 PRACTICAL INFORMATION ON TRbF 20-L PRACTICAL INFORMATION 5 The operator of safety cabinets as per EN part 1 is responsible for their proper use. The corresponding requirements are covered in the German Technical Rules for Flammable Liquids (TRbF) 20-L and represent the basic safety requirements for operating safety cabinets for the storage of flammable liquids. 1. Fire resistance capability: Safety cabinets within the meaning of the TRbF are particular devices with a fire resistance capability of > 90 minutes (as per EN ) - technological state-of-the-art in Germany. In the case of fire they ensure sufficient time for escape and rescue (requirement as per EN ). 2. Installation and operation: to protect employees and third parties, in particular from fire and explosion hazards. 3. Sump capacity: Each safety cabinet must be equipped with a base sump tray which can accommodate at least 10% of the total volume of all stored containers and/or 110% of the volume of the largest stored container. 4. Self-closing doors: Doors of safety cabinets as per EN are fundamentally self-closing. All storelab safety cabinets are equipped with a hold-open device (doors remain open during operation); this ensures safe operation, loading and removal. A thermal mechanism automatically closes the doors at a max. room temperature of 50 C. 5. Maximum storage amounts: The amount of flammable liquids to be stored in safety cabinets is limited! The total of all the stored containers (within a fire section) may not exceed the following maximum amounts: In breakable containers: - 60 liters extremely flammable and highly flammable liquids (flashpoint below 21 C) liters flammable liquids (flashpoint from 21 C to 55 C) In other containers: liters extremely flammable and highly flammable liquids (flashpoint below 21 C) liters flammable liquids (flashpoint from 21 C to 55 C) The maximum storage amount for safety cabinets with a fire resistance capability (FWF) of less than 90 minutes is limited to max. 300 liters! Of this amount the extremely flammable and highly flammable liquids may not exceed max. 200 liters! 6. Ventilation: With forced ventilation: Operation of safety cabinets have to ensure that air inlet and outlet system work constantly effective; the rate of air exchange when cabinet is closed has to be at least 10 times per hour. Ventilation has to be effective immediately above the base sump tray of the cabinet. The ventilation system has to discharge into the atmosphere at a non-hazardous location. Air inlet and outlet opening has to be automatically sealed at a max. temperature of 70 C (+/- 10 C). Without technical-forced ventilation: Avoidance of electrostatic charges - the cabinet has to be grounded. The area of 2.5 m around the safety cabinet and up to a height of 0.5 m above floor level is to be regarded as a Zone 2 explosion-endangered area. 109

110 PRODUCTION SAFETY CABINETS - EVERYTHING FROM SINGLE SOURCE Development + Design The use of modern 3D design programmes Test procedure Fire chamber of an independent testing institute Production Underbench cabinet type 90 during flame impingement Test certificates and documents for approval Modern, newly designed production facilities Modern sheet metal machining center 110

111 CONTENTS HAZARDOUS SUBSTANCES CABINETS (TYPE 30) Hazardous substances cabinets as per EN (type 30)... Brand quality MADE by LACONT Hazardous substances cabinets as per EN (type 30) width 600 mm + underbench cabinet AUS Type 30 / 1100 FT page 112 Hazardous substances cabinets as per EN (type 30) width 1200 mm page 113 Hazardous substances cabinets as per EN (type 30) with glass doors width mm page

112 HAZARDOUS SUBSTANCES CABINETS (TYPE 30) SIS TYPE 30 / 600 AND AUS TYPE 30 / 1100 FT Approved for storage of flammable liquids at the workplace as per EN (type 30) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 30) with a fire resistance >30 minutes Body made from B1 material RAL light grey, door(s) either in RAL light grey or RAL daffodil yellow Height-adjustable shelves at intervals of 32 mm Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard With inner fittings: Extraction fans please see page 140! EN SiS Type 30 / 600 / SiS Type 30 / x base sump tray (sump capacity 23 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves (SiS Type 30 / : 2 x shelves) With automatic thermal closing mechanism SiS Type 30 / 600, Art. No. B A, door RAL daffodil yellow, incl. 3 shelves, base sump tray and perforated cover plate Socle incl., with removable panel AUS Type 30 / 1100 FT, Art. No. B A, incl. socle, Art. No. B A With inner fittings: AUS Type 30 / 1100 FT 1 x base sump tray (sump capacity 26 liters) 1 x perforated base tray cover as 1st storing level With automatic thermal closing mechanism Safe compartment, SF Type 30/600, Dimensions W x D x H (mm) = 480 x 518 x 422,5; Art. No. B A SiS Type 30 / , Art. No. B A, door RAL daffodil yellow, incl. 2 shelves, base sump tray and perforated cover plate Model SiS Type 30 / 600 SiS Type 30 / AUS Type 30 / 1100 FT External dimensions W x D x H (mm) 595 x 595 x x 595 x x 570 x 600 Internal dimensions W x D x H (mm) 480 x 519 x x 519 x x 494 x 425 Door(s) 1 (hinged right) 1 (hinged right) 2 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door(s): RAL light grey sheet steel B A B A B A Art. No., door(s): RAL daffodil yellow sheet steel B A B A B A Accessories Material Article No. Article No. Article No. Shelf sheet steel B A B A - Socle height 35 mm B1 - - B A Safe compartment B1 B A B A - 112

113 HAZARDOUS SUBSTANCES CABINETS (TYPE 30) SIS TYPE 30 / 1200 Approved for storage of flammable liquids at the workplace as per EN (type 30) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 30) with a fire resistance >30 minutes Body made from B1 material RAL light grey, doors either in RAL light grey or RAL daffodil yellow Height-adjustable shelves at intervals of 32 mm Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof EN Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock (simultaneous closing) SiS Type 30 / 1200, Art. No. B A, door RAL daffodil yellow, incl. 3 shelves, base sump tray and perforated cover plate With inner fittings: 1 x base sump tray (sump capacity 33 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves With automatic thermal closing mechanism Extraction fans please see page 140! SiS Type 30 / 1200, Art. No. B A, door RAL daffodil yellow, incl. 3 shelves, base sump tray and perforated cover plate Safe compartment, SF Type 30/1200, Dimensions W x D x H (mm) = 1080 x 518 x 422,5; Art. No. B A Model SiS Type 30 / 1200 External dimensions W x D x H (mm) 1195 x 595 x 1935 Internal dimensions W x D x H (mm) 1080 x 519 x 1660 Doors 2 Weight (kg) 284 Outer body: RAL light grey Material inner fittings Art. No., door(s): RAL light grey sheet steel B A Art. No., door(s): RAL daffodil yellow sheet steel B A Socle incl., with removable panel Accessory Material Article No. Shelf sheet steel B A Safe compartment B1 B A 113

114 HAZARDOUS SUBSTANCES CABINETS (TYPE 30) SIS TYPE 30 / 600 GL AND SIS TYPE 30 / 1200 GL Approved for storage of flammable liquids at the workplace as per EN (type 30) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 30) with a fire resistance >30 minutes Body made from B1 material RAL light grey, door(s) either in RAL light grey or RAL daffodil yellow and fire safety glass Height-adjustable shelves at intervals of 32 mm Automatic thermal closing mechanism if fire occurs Door(s) after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof EN Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door(s) with cylinder lock For model 600 single door hinged right as standard With inner fittings: SiS Type 30 / 1200 GL, Article No. B A, door RAL light grey, incl. 3 shelves, base sump tray and perforated cover plate 1 x base sump tray (sump capacity model 600 = 23 liters and model 1200 = 33 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves With automatic thermal closing mechanism Extraction fans please see page 140! SiS Type 30 / 600 GL, Art. No. B A, door RAL daffodil yellow, incl. 3 shelves, base sump tray and perforated cover plate SiS Type 30 / 600 GL, Art. No. B A, door RAL light grey, incl. 3 shelves, base sump tray and perforated cover plate Safe compartment, SF Type 30/1200, Dimensions W x D x H (mm) = 1080 x 518 x 422,5; Art. No. B A Model SiS Type 30 / 600 GL SiS Type 30 / 1200 GL External dimensions W x D x H (mm) 595 x 595 x x 595 x 1935 Internal dimensions W x D x H (mm) 480 x 519 x x 519 x 1660 Glass door(s) 1 (hinged right) 2 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door(s): RAL light grey sheet steel B A B A Art. No., door(s): RAL daffodil yellow sheet steel B A B A Accessories Material Article No. Article No. Shelf sheet steel B A B A Safe compartment B1 B A B A 114

115 CONTENTS HAZARDOUS SUBSTANCES CABINETS (TYPE 90) Hazardous substances cabinets as per EN (type 90)... Brand quality MADE by LACONT Hazardous substances cabinets (type 90) Width 600 / 900 / 1200 / 1400 mm page Hazardous substances drum cabinets (type 90) Width 900 mm page Hazardous substances drum cabinets (type 90) Width 1550 mm page Hazardous substances cabinets (type 90) with pull-out shelves width 600 mm page Hazardous substances cabinets (type 90) with pull-out shelves width 1200 mm page Hazardous substances underbench cabinets (type 90) Width 600 / 880 / 1100 / 1400 mm page Extraction fans / hazardous substances filter attachment page Hazardous substances cabinets (type 90) for airbag width 900 mm page 142 Hazardous substances cabinets (type 90) for documents width 1200 mm page 143 Hazardous substances cabinets for gas cylinders (G 30) and TRG page

116 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 600 Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, door either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Shelves height-adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) SiS Type 90 / , Art. No. B B, RAL 7035, incl. 2 shelves, base sump tray and cover plate DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20 Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard (door hinged left on request) EN Model SiS Type 90 / 600 SiS Type 90 / External dimensions W x D x H (mm) 595 x 598 x x 598 x 1315 Internal dimensions W x D x H (mm) 492 x 430 x x 430 x 1080 Door 1 1 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door: RAL light grey sheet steel B D B B Art. No., door: RAL light grey stainless steel V2A B B B B Art. No., door: RAL daffodil yellow sheet steel B G B G Art. No., door: RAL daffodil yellow stainless steel V2A B G B G Accessories Material Article No. Shelf sheet steel B D SiS Type 90 / 600, Art. No. B G, door RAL 1007, incl. 3 shelves, base sump tray and perforated cover plate With inner fittings: 1 x base sump tray (sump capacity 22 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves (SiS Type 90 / : 2 x shelves) With automatic thermal closing mechanism Shelf stainless steel V2A B B PE-insert for base sump tray, for storage of aggressive media B D PE-insert for shelf, for storage of aggressive media B D Safe compartments For storage of small amounts of toxic and very toxic substances in storelab safety cabinets Spatial separation from flammable liquids Door with cylinder lock Powder-coated sheet steel in RAL light grey With installation accessories for fixing in position, standing on shelf Extraction fans please see page 140! Model SF 1 External dimensions W x D x H (mm) 447 x 370 x 436 Door 1 Article No. B B SF 1, RAL 7035, Article No. B B 116

117 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 900 Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, doors either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Shelves height-adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20 Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock (simultaneous closing) Safe compartments For storage of small amounts of toxic and very toxic substances in storelab safety cabinets Spatial separation from flammable liquids Door with cylinder lock Powder-coated sheet steel in RAL light grey With installation accessories for fixing in position, standing on shelf EN SiS Type 90 / 900, Art. No. B G, doors RAL 1007, incl. 3 shelves, base sump tray and perforated cover plate With inner fittings: 1 x base sump tray (sump capacity 29 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves With automatic thermal closing mechanism Model SiS Type 90 / 900 External dimensions W x D x H (mm) 900 x 598 x 1935 Internal dimensions W x D x H (mm) 797 x 430 x 1700 Doors 2 Weight (kg) 395 Outer body: RAL light grey Material inner fittings Article No., doors: RAL light grey sheet steel B B Article No., doors: RAL light grey stainless steel V2A B B Article No., doors: RAL daffodil yellow sheet steel B G SF 1, RAL 7035, Article No. B B Model SF 1 External dimensions W x D x H (mm) 447 x 370 x 436 Door 1 Article No. B B Article No., doors: RAL daffodil yellow stainless steel V2A B G Accessories Material Article No. Shelf sheet steel B B Shelf stainless steel V2A B B PE-insert for base sump tray, for storage of aggressive media B B PE-insert for shelf, for storage of aggressive media B B 117

118 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, doors either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Shelves height-adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20 Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock (simultaneous closing) SiS Type 90 / 1200, Article No. B G, doors RAL 1007, incl. 3 shelves, base sump tray and perforated cover plate With inner fittings: 1 x base sump tray (sump capacity 33 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves (SiS Type 90 / x shelves) With automatic thermal closing mechanism EN Extraction fans please see page 140! Model SiS Type 90 / 1200 SiS Type 90 / External dimensions W x D x H (mm) 1190 x 598 x x 598 x 1315 Internal dimensions W x D x H (mm) 1087 x 430 x x 430 x 1080 Doors 2 2 Weight (kg) Outer body: RAL light grey Material inner fittings Article No., doors: RAL light grey sheet steel B D B B Safe compartments For storage of small amounts of toxic and very toxic substances in storelab safety cabinets Spatial separation from flammable liquids Door(s) with cylinder lock Powder-coated sheet steel in RAL light grey With installation accessories for fixing in position, standing on shelf Article No., doors: RAL light grey stainless steel V2A B B B B Article No., doors: RAL daffodil yellow sheet steel B G B G Article No., doors: RAL daffodil yellow stainless steel V2A B G B G Accessories Material Article No. Shelf sheet steel B D Shelf stainless steel V2A B B PE-insert for base sump tray, for storage of aggressive media PE-insert for shelf, for storage of aggressive media B D B D SF 2, RAL 7035, Article No. B B Model SF 1 SF 2 External dimensions W x D x H (mm) 447 x 370 x x 370 x 436 Door(s) 1 2 Article No. B B B B 118

119 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1400 Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, doors either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Shelves height-adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20 Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock (simultaneous closing) SiS Typ 90 / 1400, Article No. B B, RAL 7035, incl. 3 shelves, base sump tray and perforated cover plate Extra large storage capacity! With inner fittings: 1 x base sump tray (sump capacity 34 liters) 1 x perforated base tray cover as 1st storing level 3 x shelves With automatic thermal closing mechanism Model SiS Type 90 / 1400 External dimensions W x D x H (mm) 1400 x 598 x 1935 Internal dimensions W x D x H (mm) 1297 x 430 x 1700 EN Doors 2 Weight (kg) 615 Outer body: RAL light grey Material inner fittings Article No., doors: RAL light grey sheet steel B B Article No., doors: RAL light grey stainless steel V2A B B Article No., doors: RAL daffodil yellow sheet steel B G Article No., doors: RAL daffodil yellow stainless steel V2A B G Extraction fans please see page 140! Accessories Material Article No. Shelf sheet steel B B Shelf stainless steel V2A B B PE-insert for base sump tray, for storage of aggressive media B B PE-insert for shelf, for storage of aggressive media B B 119

120 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 900 For storage of flammable liquids in a standing 200 liter drum inside buildings Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body from powder-coated sheet steel in RAL light grey, doors RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Base sump tray acc. to WHG, with Ü-sign according to steel trough guidelines, made from 3 mm sheet steel, painted in RAL light grey Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) EN DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors with cylinder lock (simultaneous closing) 1 x ground clamp as standard (for active storage) Extraction fans please see page 140! SiS-FAS Type 90 / 900-EW, Article No. B A Suitable for installation directly at workplace! Socle, Art. No. B A with removable panel Model SiS-FAS Type 90 / 900-EW External dimensions W x D x H (mm) 900 x 900 x 1935 Internal dimensions W x D x H (mm)* 797 x 735 x 1290 Doors 2 Capacity 200 liter drum, standing 1 Sump capacity of base sump tray (l) 220 Weight (kg) 535 Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A SiS-FAS Type 90 / 900-EW, Article No. B A, with optional grid for storing small containers * from upper edge of base sump tray Accessories Grid, max. load 75 kg PE-insert for base sump tray, for storage of aggressive media Socle, tested acc. to type 90 cabinets W x D x H (mm) = 900 x 900 x 113 Article No. B A B A B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 120

121 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 900 For the horizontal storage of flammable liquids in max. 3 x 60 liter steel drums inside buildings Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey, doors RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Base sump tray acc. to WHG, with Ü-sign according to steel trough guidelines, made from 3 mm sheet steel, galvanized All shelving fittings galvanized Storage of up to 3 x 60 liter steel drums possible, alternatively with grid for storing small containers or canisters Storage levels height-adjustable at intervals of 25 mm Max. load per storage level 200 kg Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors with cylinder lock (simultaneous closing) 1 x ground clamp as standard (for active storage) EN Extraction fans please see page 140! SiS-FAS Type 90 / , Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin SiS-FAS Type 90 / GR, Art. No. B A SiS-FAS Type 90 / GR, Art. No. B A Model SiS-FAS Type 90 / SiS-FAS Type 90 / GR SiS-FAS Type 90 / GR SiS-FAS Type 90 / 900 KG-GR External dimensions W x D x H (mm) 900 x 900 x x 900 x x 900 x x 900 x 1935 Internal dimensions W x D x H (mm)* 797 x 735 x x 735 x x 735 x x 735 x 1580 Doors Capacity 60 liter steel drum, lying No. of grids for storing small containers Sump capacity of base sump tray (l) Weight (kg) Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A B A B A B A * from upper edge of base sump tray Accessory Article No. Article No. Article No. Article No. Additional grid-type storage level B A B A B A B A 121

122 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 1550 For storage of flammable liquids in containers and drums up to 200 liters inside buildings Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey, doors RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Base sump tray acc. to WHG, with Ü-sign according to steel trough guidelines, made from 3 mm sheet steel Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors with cylinder lock (simultaneous closing) Door inside clearance width 1310 mm Internal emergency opening device 1 x ground clamp as standard (for active storage) EN Suitable for installation directly at workplace! Socle, Art. No. B A with removable panel emergency opening device 122

123 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 1550 For storage of flammable liquids of max. 2 standing 200 liter drums inside buildings Base sump tray acc. to WHG, made from 3 mm sheet steel with grid; with Ü-sign according to steel trough guidelines, Version 1 - with base socles (for transport by fork-lift trucks, etc.), easily removable, Version 2 - without base socles Painted in RAL light grey Sump capacity 220 liters Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin SiS-FAS Type 90 / 1550-CW, Article No. B A SiS-FAS Type 90 / 1550-EW, Article No. B A Extraction fans please see page 140! EN Generous door clearances for easy and convenient euro-pallet handling. SiS-FAS Type 90 / 1550-CW, Article No. B A, with optional grid for storing small containers Model SiS-FAS Type 90 / 1550-CW SiS-FAS Type 90 / 1550-EW External dimensions W x D x H (mm) 1550 x 1025 x x 1025 x 2200 Internal dimensions W x D x H (mm)* 1450 x 870 x x 870 x 1745 Doors 2 2 Capacity 200 liter drum, standing 2 2 Sump capacity of base sump tray (l) Weight (kg) Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A B A * from upper edge of base sump tray Accessories Grid, max. load 75 kg PE-insert for base sump tray, for storage of aggressive media Socle, tested acc. to type 90 cabinets W x D x H (mm) = 1550 x 1025 x 113 Article No. B A B A B A 123

124 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 1550 For horizontal storage of flammable liquids of max. 9 x 60 liter steel drums inside buildings Base sump tray acc. to WHG, made from 3 mm sheet steel, painted in RAL light grey, with Ü-sign according to steel trough guidelines Sump capacity 220 liters With grid support projecting in front of shelving rack All shelving fittings galvanized Storage for up to 9 x 60 liter steel drums is possible, alternatively grid storage levels for storing small containers Storage levels height-adjustable at 25 mm intervals Max. load per storage level 200 kg SiS-FAS Type 90 / , Article No. B A EN SiS-FAS Type 90 / GR, Article No. B A Building Regulations List A, Part 1 Extraction fans please see page 140! steel troughs guidelines TüV-Nord systems DIBt Berlin SiS-FAS Type 90 / GR, Article No. B A Model SiS-FAS Type 90 / SiS-FAS Type 90 / GR SiS-FAS Type 90 / GR External dimensions W x D x H (mm) 1550 x 1025 x x 1025 x x 1025 x 2200 Internal dimensions W x D x H (mm)* 1450 x 870 x x 870 x x 870 x 1745 Doors Capacity 60 liter steel drum, horizontal No. of grids for storing small containers Sump capacity of base sump tray (l) Weight (kg) Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A B A B A Accessory Socle, tested acc. to type 90 cabinets W x D x H (mm) = 1550 x 1025 x 113 Article No. B A * from upper edge of base sump tray 124

125 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / 1550 For storage of flammable liquids in small containers inside buildings Base sump tray acc. to WHG, made from 3 mm sheet steel, galvanized, with Ü-sign according to steel trough guidelines Sump capacity 80 liters All shelving fittings galvanized Max. load per storage level 200 kg with uniformly distributed load Storage levels height-adjustable at 25 mm intervals SiS-FAS Type 90 / 1550 KG-GR is used wherever other safety cabinets cannot provide sufficient storage space. Extraction fans please see page 140! SiS-FAS Type 90 / 1550 KG-GR, Article No. B A Building Regulations List A, Part 1 EN steel troughs guidelines TüV-Nord systems DIBt Berlin Model SiS-FAS Type 90 / 1550 KG-GR External dimensions W x D x H (mm) 1550 x 1025 x 2200 Internal dimensions W x D x H (mm) 1450 x 870 x 1955 Doors 2 Type of lowest storage level Other storage levels Base sump tray 4 x grid-type shelves Sump capacity of base sump tray (l) 80 Weight (kg) 1000 Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A emergency opening device Accessories Additional grid storage level Socle, tested acc. to type 90 cabinets W x D x H (mm) = 1550 x 1025 x 113 Article No. B A B A 125

126 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / For storage of flammable liquids in small containers, drums and KTC / IBC indoors Whole construction tested by an authorized material testing institute in accordance with EN (type 90) with fire resistance of >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey, doors RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Base sump tray acc. to WHG, with Ü-sign according to steel trough guidelines, made from 3 mm sheet steel Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors with cylinder lock (simultaneous closing) Door inside clearance width 1310 mm Internal emergency opening device 1 x ground clamp as standard (for active storage) SiS-FAS Type 90 / , Article No. B A, with optional grid Our standard - socle with removable panel! Suitable for installation directly at workplace! Extraction fans please see page 140! Building Regulations List A, Part 1 EN steel troughs guidelines TüV-Nord systems DIBt Berlin SiS-FAS Type 90 / H, Article No. B A Socle as standard with removable panel 126

127 HAZARDOUS SUBSTANCES DRUM CABINETS SIS-FAS TYPE 90 / For storage of flammable liquids concerning 4 vertical 200 liter drums, up to 4 horizontal 200 liter drums or 1 piece KTC / IBC until 1000 liters indoors Base sump tray acc. to WHG, made from 3 mm sheet steel with grid support, with Ü-sign according to steel trough guidelines Base sump tray, painted in RAL light grey with sump capacity of 220 or 1000 liters Extraction fans please see page 140! SiS-FAS Type 90 / K, Article No. B A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems EN DIBt Berlin Model SiS-FAS Type 90 / SiS-FAS Type 90 / H SiS-FAS Type 90 / K External dimensions W x D x H (mm) 1550 x 1430 x x 1430 x x 1430 x 2315 Internal dimensions W x D x H (mm)* 1450 x 1275 x x 1275 x x 1275 x 1276 Doors Capacity 200 liter drums (vertical) 4-4 Capacity 200 liter drums (horizontal) Capacity KTC / IBC Sump capacity of base sump tray (l) Weight (kg) Article No., outer body: RAL light grey, doors: RAL daffodil yellow B A B A B A * from upper edge of base sump tray Accessories Article No. Article No. Article No. Grid, max. load 75 kg W x D (mm) = 1450 x 500 B A - - PE-insert for base sump tray, for storage of aggressive media B A B A B A 127

128 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 600 VS WITH PULL-OUT SHELVES Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, door either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Pull-out shelves with automatic return ensure high working safety Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard With inner fittings: Either with 6, 5 or 4 pull-out shelves (AZB)* With door hold-open device SiS Typ 90 / 600 VS6, Article No. B B, RAL 7035, incl. 6 pull-out shelves * max. load 30 kg per shelf with uniformly distributed load, sump capacity 7 liters for AZB EN Model SiS Type 90 / 600 VS6 SiS Type 90 / 600 VS5 SiS Type 90 / 600 VS4 External dimensions W x D x H (mm) 595 x 598 x x 598 x x 598 x 1935 Internal dimensions W x D x H (mm) 492 x 430 x x 430 x x 430 x 1700 Door DIN right Inner fittings 6 x AZB 5 x AZB 4 x AZB Weight (kg) Outer body: RAL light grey Material inner fittings Article No., door: RAL light grey sheet steel B B B B B B Article No., door: RAL light grey stainless steel V2A B B B B B B Article No., door: RAL daffodil yellow sheet steel B G B G B G Article No., door: RAL daffodil yellow stainless steel V2A B G B G B G Accessories Material Article No. Perforated cover plate for pull-out shelf sheet steel B B Perforated cover plate for pull-out shelf stainless steel V2A B B Extraction fans please see page 140! 128

129 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 600 ES WITH PULL-OUT SHELVES Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, door either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus EN Pull-out shelves with automatic return ensure high working safety Automatic thermal closing mechanism if fire occurs Door after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Door with cylinder lock Door hinged right as standard SiS Type 90 / 600 VS4-ES, Art. No. B B, RAL 7035, incl. 4 pull-out shelves and 1 disposal compartment With inner fittings: Either witht 4 or 3 pull-out shelves (AZB)* Disposal compartment (ESF) With door hold-open device * max. load 30 kg per shelf with uniformly distributed load, sump capacity 7 liters for AZB and 22 liter for ESF Extraction fans please see page 140! Model SiS Type 90 / 600 VS3-ES SiS Type 90 / 600 VS4-ES External dimensions W x D x H (mm) 595 x 598 x x 598 x 1935 Internal dimensions W x D x H (mm) 492 x 430 x x 430 x 1700 Door DIN right 1 1 Inner fittings 1 x ESF 1 x ESF 3 x AZB 4 x AZB Weight (kg) Outer body: RAL light grey Material inner fittings Article No., door: RAL light grey sheet steel B B B B Article No., door: RAL light grey stainless steel V2A B B B B Article No., door: RAL daffodil yellow sheet steel B G B G Article No., door: RAL daffodil yellow stainless steel V2A B G B G Accessories Material Article No. Perforated cover plate for pull-out shelf sheet steel B B Perforated cover plate for pull-out shelf stainless steel V2A B B Perforated cover plate for disposal compartment sheet steel B B Perforated cover plate for disposal compartment stainless steel V2A B B 129

130 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 VS WITH PULL-OUT SHELVES Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, doors either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Pull-out shelves with automatic return ensure high working safety Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock (simultaneous closing) With inner fittings: Either with 6, 5 or 4 pull-out shelves (AZB)* With door hold-open device SiS Type 90 / 1200 VS6, Article No. B B, RAL 7035, inkl. 6 pull-out shelves * max. load 30 kg per shelf with uniformly distributed load, sump capacity 17 liters for AZB EN Model SiS Type 90 / 1200 VS6 SiS Type 90 / 1200 VS5 SiS Type 90 / 1200 VS4 External dimensions W x D x H (mm) 1190 x 598 x x 598 x x 598 x 1935 Internal dimensions W x D x H (mm) 1087 x 430 x x 430 x x 430 x 1700 Doors Inner fittings 6 x AZB 5 x AZB 4 x AZB Weight (kg) Outer body: RAL light grey Material inner fittings Article No., doors: RAL light grey sheet steel B B B B B B Article No., doors: RAL light grey stainless steel V2A B B B B B B Article No., doors: RAL daffodil yellow sheet steel B G B G B G Article No., doors: RAL daffodil yellow stainless steel V2A B G B G B G Accessories Material Article No. Perforated cover plate for pull-out shelf sheet steel B B Perforated cover plate for pull-out shelf stainless steel V2A B B Extraction fans please see page 140! 130

131 HAZARDOUS SUBSTANCES CABINETS SIS TYPE 90 / 1200 VS / ES WITH PULL-OUT SHELVES Approved for storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, doors either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Pull-out shelves with automatic return ensure high working safety Tray-shaped shelves height-adjustable at intervals of 64 mm Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction on cabinet roof Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in accordance with BGR 132 (avoidance of sources of ignition) Markings according to EN / TRbF 20, Annex L / ISO 3864 Leveling feet for installing cabinet horizontally Doors with cylinder lock (simultaneous closing) With inner fittings: Either with base sump tray (BW), perforated cover plate (LB) and tray-shaped shelves (EN), pull-out shelves (AZB)*, disposal compartment (ESF) With central dividing panel With door hold-open device EN SiS Typ 90 / 1200 ES MI, Article No. B B, RAL 7035, incl. 6 pull-out shelves (left), 3 pull-out shelves and 1 disposal compartment (right) * max. load 30 kg per shelf with uniformly distributed load, sump capacity 7 liters for AZB and 22 liter for ESF Schranktyp SiS Type 90 / 1200 VS MI SiS Type 90 / 1200 VS MI SiS Type 90 / 1200 ES MI SiS Type 90 / 1200 ES MI External dimensions W x D x H (mm) 1190 x 598 x x 598 x x 598 x x 598 x 1935 Internal dimensions W x D x H (mm) 1087 x 430 x x 430 x x 430 x x 430 x 1700 Doors Inner fittings Dividing Dividing Dividing Dividing panel panel panel panel left: 6 x AZB left: 6 x AZB left: 6 x AZB left: 1 x ESF right: 6 x AZB right: 3 x EN right: 1 x ESF 3 x AZB 1 x BW 3 x AZB right: 1 x ESF 1 x LB 3 x AZB Weight (kg) Outer body: RAL light grey Material inner fittings Article No., doors: RAL light grey sheet steel B B B B B B B B Article No., doors: RAL light grey stainless steel V2A B B B B B B B B Article No., doors: RAL daffodil yellow sheet steel B G B G B G B G Article No., doors: RAL daffodil yellow stainless steel V2A B G B G B G B G Accessories Material Art. No. (Model VS) Art. No. (Model ES) Perforated cover plate for pull-out shelf sheet steel B B B B Perforated cover plate for pull-out shelf stainless steel V2A B B B B Perforated cover plate for disposal compartment sheet steel - B B Perforated cover plate for disposal compartment stainless steel V2A - B B 131

132 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Door / drawer after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door / drawer* with cylinder lock Door type FT hinged right as standard Inner width with pulled-out drawer approx. 250 mm AUS Type 90 / FT, Article No. B G * max. load 30 kg per shelf with uniformly distributed load Safety cabinets with inner fittings: AUS Type 90 / FT 1 x base sump tray (sump capacity 12 liters) 1 x perforated cover plate as 1st storing level EN AUS Type 90 / SF, Article No. B G AUS Type 90 / SF 1 x base sump tray (sump capacity 12 liters) 1 x perforated cover plate as 1st storing level AUS Type 90 / FT, Article No. B G, with additional shelf, available as accessory Model AUS Type 90 / FT AUS Type 90 / SF External dimensions W x D x H (mm) 577 x 500 x x 500 x 600 Internal dimensions W x D x H (mm) 485 x 362 x x 362 x 514 Door hinged right 1 - Drawer - 1 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door / drawer: RAL light grey sheet steel B A B A Art. No., door / drawer: RAL light grey stainless steel V2A B A B A Art. No., door / drawer: RAL daffodil yellow sheet steel B G B G Art. No., door / drawer: RAL daffodil yellow stainless steel V2A B G B G Accessories Material Article No. Article No. Shelf sheet steel B A - Shelf stainless steel V2A B A - additional pull-out shelf sheet steel - B A additional pull-out shelf stainless steel V2A - B A Socle height 35 mm sheet steel B A B A Socle, perforated height 35 mm sheet steel B A B A 132

133 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / 600 Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Door / drawer after temperature increase to 50 C and EN Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door / drawer* with cylinder lock Door type FT hinged right as standard Inner width with pulled-out drawer approx. 320 mm AUS Type 90 / 600 FT, Article No. B A, with perforated socle, available as accessory * max. load 30 kg per shelf with uniformly distributed load Safety cabinets with inner fittings: AUS Type 90 / 600 FT 1 x base sump tray (sump capacity 12 liters) 1 x perforated cover plate as 1st storing level AUS Type 90 / 600 SF 1 x base sump tray (sump capacity 12 liters) 1 x perforated cover plate as 1st storing level Extraction fans please see page 140! AUS Type 90 / 600 SF, Article No. B A, with perforated socle, available as accessory Model AUS Type 90 / 600 FT AUS Type 90 / 600 SF External dimensions W x D x H (mm) 577 x 570 x x 570 x 600 Internal dimensions W x D x H (mm 485 x 432 x x 432 x 514 Door hinged right 1 - Drawer - 1 Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door / drawer: RAL light grey sheet steel B A B A Art. No., door / drawer: RAL light grey stainless steel V2A B A B A Art. No., door / drawer: RAL daffodil yellow sheet steel B G B G Art. No., door / drawer: RAL daffodil yellow stainless steel V2A B G B G Accessories Material Article No. Article No. Shelf sheet steel B A - Shelf stainless steel V2A B A - additional pull-out shelf sheet steel - B A additional pull-out shelf stainless steel V2A - B A Socle height 35 mm sheet steel B A B A Socle, perforated height 35 mm sheet steel B A B A 133

134 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Door/s and drawer/s after temperature increase to 50 C and EN Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door/s / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 250 mm AUS Type 90 / FT SF, Article No. B LG, with additional shelf, available as accessory * max. load 30 kg per shelf with uniformly distributed load Safety cabinets with inner fittings: AUS Type 90 / FT, Article No. B G, with additional shelf, available as accessory All models Base sump tray (sump capacity type FT 1 x 18 liters, type SF 1 x 18 liters, type FT SF 2 x 11 liters, type SF SF 2 x 11 liters) Perforated cover plate as 1st storing level Extraction fans please see page 140! Model AUS Type 90 / FT AUS Type 90 / SF AUS Type 90 / FT SF AUS Type 90 / SF SF External dimensions W x D x H (mm) 877 x 500 x x 500 x x 500 x x 500 x 600 Internal dimensions W x D x H (mm) 785 x 362 x x 362 x / 374 x 362 x / 374 x 362 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings AUS Type 90 / SF, Article No. B G Art. No., door/s / drawer/s: RAL light grey sheet steel B A B A B L B A Art. No., door/s / drawer/s: RAL light grey stainless steel V2A B A B A B L B A Art. No., door/s / drawer/s: RAL daffodil yellow sheet steel B G B G B LG B G Art. No., door/s / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B LG B G Accessories Material Article No. Article No. Article No. Article No. Shelf sheet steel B A - B A - Shelf stainless steel V2A B A - B A - additional pull-out shelf sheet steel - B A B A B A additional pull-out shelf stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 134

135 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / 880 Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Door/s and drawer/s after temperature increase to 50 C and EN Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door/s / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 320 mm AUS Type 90 / 880 FT, Article No. B A * max. load 30 kg per shelf with uniformly distributed load AUS Type 90 / 880 SF, Article No. B A Safety cabinets with inner fittings: All models Base sump tray (sump capacity type FT 1 x 18 liters, type SF 1 x 18 liters, type FT SF 2 x 11 liters, type SF SF 2 x 11 liters) Perforated cover plate as 1st storing level AUS Type 90 / 880 FT below a fume hood AUS Type 90 / 880 SF SF, Article No. B G Model AUS Type 90 / 880 FT AUS Type 90 / 880 SF AUS Type 90 / 880 FT SF AUS Type 90 / 880 SF SF External dimensions W x D x H (mm) 877 x 570 x x 570 x x 570 x x 570 x 600 Internal dimensions W x D x H (mm) 785 x 432 x x 432 x / 374 x 432 x / 374 x 432 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door/s / drawer/s: RAL light grey sheet steel B A B A B A B A Art. No., door/s / drawer/s: RAL light grey stainless steel V2A B A B A B A B A Art. No., door/s / drawer/s: RAL daffodil yellow sheet steel B G B G B G B G Art. No., door/s / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B G B G Accessories Material Article No. Article No. Article No. Article No. Shelf sheet steel B A - B A - Shelf stainless steel V2A B A - B A - additional pull-out shelf sheet steel - B A B A B A additional pull-out shelf stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 135

136 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Door/s and drawer/s after temperature increase to 50 C and EN Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door/s / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 250 mm AUS Type 90 / FT, Article No. B A, with additional shelf, available as accessory * max. load 30 kg per shelf with uniformly distributed load AUS Type 90 / FT SF, Article No. B LG Safety cabinets with inner fittings: All models Base sump tray (sump capacity type FT 1 x 26 liters, type SF 1 x 26 liters, type FT SF 2 x 12 liters, type SF SF 2 x 12 liters) Perforated cover plate as 1st storing level AUS Type 90 / SF, Article No. B A, with additional pull-out shelf, available as accessory AUS Type 90 / SF SF, Article No. B A Model AUS Type 90 / FT AUS Type 90 / SF AUS Type 90 / FT SF AUS Type 90 / SF SF External dimensions W x D x H (mm) 1100 x 500 x x 500 x x 500 x x 500 x 600 Internal dimensions W x D x H (mm) 1008 x 362 x x 362 x / 484 x 362 x / 484 x 362 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door/s / drawer/s: RAL light grey sheet steel B A B A B L B A Art. No., door/s / drawer/s: RAL light grey stainless steel V2A B A B A B L B A Art. No., door/s / drawer/s: RAL daffodil yellow sheet steel B G B G B LG B G Art. No., door/s / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B LG B G Accessories Material Article No. Article No. Article No. Article No. Shelf sheet steel B A - B A - Shelf stainless steel V2A B A - B A - additional pull-out shelf sheet steel - B A B A B A additional pull-out shelf stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 136

137 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / 1100 Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs EN Door/s and drawer/s after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Door/s / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 320 mm * max. load 30 kg per shelf with uniformly distributed load AUS Type 90 / 1100 FT, Article No. B A, with socle, available as accessory AUS Type 90 / 1100 SF, Article No. B A, with perforated socle, available as accessory AUS Type 90 / 1100 FT SF, Article No. B A, with additional shelf and perforated socle, available as accessory Safety cabinets with inner fittings: All models Base sump tray (sump capacity type FT 1 x 26 liters, type SF 1 x 26 liters, type FT SF 2 x 12 liters, type SF SF 2 x 12 liters) Perforated cover plate as 1st storing level Extraction fans please see page 140! AUS Type 90 / 1100 SF SF, Article No. B A, RAL 7035, with perforated socle, available as accessory Model AUS Type 90 / 1100 FT AUS Type 90 / 1100 SF AUS Type 90 / 1100 FT SF AUS Type 90 / 1100 SF SF External dimensions W x D x H (mm) 1100 x 570 x x 570 x x 570 x x 570 x 600 Internal dimensions W x D x H (mm) 1008 x 432 x x 432 x / 484 x 432 x / 484 x 432 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., door/s / drawer/s: RAL light grey sheet steel B A B A B A B A Art. No., door/s / drawer/s: RAL light grey stainless steel V2A B A B A B A B A Art. No., door/s / drawer/s: RAL daffodil yellow sheet steel B G B G B G B G Art. No., door/s / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B G B G Accessories Material Article No. Article No. Article No. Article No. Shelf sheet steel B A - B A - Shelf stainless steel V2A B A - B A - additional pull-out shelf sheet steel - B A B A B A additional pull-out shelf stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 137

138 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs Doors and drawer/s after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Extraction fans please see page 140! DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 250 mm AUS Type 90 / SF SF, Article No. B A * max. load 30 kg per shelf with uniformly distributed load Safety cabinets with inner fittings: All models Base sump tray (sump capacity - type FT 1 x 18 liters, 1 x 12 liters; - type SF 2 x 11 liters, 1 x 12 liters; - type FT SF 1 x 18 liters, 1 x 12 liters; - type SF SF 1 x 18 liters, 1 x 12 liters) Perforated cover plate as 1st storing level EN AUS Type 90 / SF, Article No. B G AUS Type 90 / SF SF, Article No. B G Model AUS Type 90 / FT AUS Type 90 / SF AUS Type 90 / FT SF AUS Type 90 / SF SF External dimensions W x D x H (mm) 1400 x 500 x x 500 x x 500 x x 500 x 600 Internal dimensions W x D x H (mm) 785 / 485 x 362 x /374/485 x 362 x / 485 x 362 x / 485 x 362 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., doors / drawer/s: RAL light grey sheet steel B A B A B A B A Art. No., doors / drawer/s: RAL light grey stainless steel V2A B A B A B A B A Art. No., doors / drawer/s: RAL daffodil yellow sheet steel B G B G B G B G Art. No., doors / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B G B G Accessories Material Article No. Article No. Article No. Article No. Shelf left sheet steel B A - B A - Shelf right sheet steel B A Shelf left stainless steel V2A B A - B A - Shelf right stainless steel V2A B A additional pull-out shelf left (left+centre type SF) sheet steel - B A - B A additional pull-out shelf right sheet steel - B A B A B A additional pull-out shelf left (left+centre type SF) stainless steel V2A - B A - B A additional pull-out shelf right stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 138

139 SAFETY UNDERBENCH CABINETS AUS TYPE 90 / 1400 Approved for the storage of flammable liquids at the workplace as per EN (type 90) and TRbF 20 - L Allows hazardous substances to be stored where they are used: under the fume cupboard, workbench, etc. Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Automatic thermal closing mechanism if fire occurs EN Doors and drawer/s after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) DN 80 ventilation connection for exhaust air extraction in the back wall Operation complies with TRbF 20-L (approved even without exhaust air connection!) Ground connection in acc. with BGR 132 (avoidance of sources of ignition) Marking according to EN / TRbF 20, Annex L / ISO 3864 Doors / drawer/s* with cylinder lock Inner width with pulled-out drawer approx. 320 mm AUS Type 90 / 1400 FT SF, Article No. B A, with additional shelf and perforated socle, available as accessory * max. load 30 kg per shelf with uniformly distributed load AUS Type 90 / 1400 SF SF, Article No. B A AUS Type 90 / 1400 FT, Art. No. B A Extraction fans please see page 140! Safety cabinets with inner fittings: All models Base sump tray (sump capacity - type FT 1 x 18 liters, 1 x 12 liters; - type SF 2 x 11 liters, 1 x 12 liters; - type FT SF 1 x 18 liters, 1 x 12 liters; - type SF SF 1 x 18 liters, 1 x 12 liters) Perforated cover plate as 1st storing level Model AUS Type 90 / 1400 FT AUS Type 90 / 1400 SF AUS Type 90 / 1400 FT SF AUS Type 90 / 1400 SF SF External dimensions W x D x H (mm) 1400 x 570 x x 570 x x 570 x x 570 x 600 Internal dimensions W x D x H (mm) 785 / 485 x 432 x /374/485 x 432 x / 485 x 432 x / 485 x 432 x 514 Doors Drawers Weight (kg) Outer body: RAL light grey Material inner fittings Art. No., doors / drawer/s: RAL light grey sheet steel B A B A B A B A Art. No., doors / drawer/s: RAL light grey stainless steel V2A B A B A B A B A Art. No., doors / drawer/s: RAL daffodil yellow sheet steel B G B G B G B G Art. No., doors / drawer/s: RAL daffodil yellow stainless steel V2A B G B G B G B G Accessories Material Article No. Article No. Article No. Article No. Shelf left sheet steel B A - B A - Shelf right sheet steel B A Shelf left stainless steel V2A B A - B A - Shelf right stainless steel V2A B A additional pull-out shelf left (left+centre type SF) sheet steel - B A - B A additional pull-out shelf right sheet steel - B A B A B A additional pull-out shelf left (left+centre type SF) stainless steel V2A - B A - B A additional pull-out shelf right stainless steel V2A - B A B A B A Socle height 35 mm sheet steel B A B A B A B A Socle, perforated height 35 mm sheet steel B A B A B A B A 139

140 EXTRACTION FANS FOR STORELAB MODELS MODELS 1-8 Our safety cabinets for the storage of hazardous substances are provided with a DN 75 / DN 80 exhaust air connection. The forced ventilation can be carried out by one of our standard extraction fans or by a suitable in-house air extraction system. The exhaust air is to be discharged from the building into a hazard-free zone. The operation of safety cabinets for the storage of flammable liquids as per EN is governed by TRbF 20-L. If the cabinets are used without forced ventilation then an EX zone (Zone 2) must be set up and maintained around the cabinet at a: - distance of 2.5 m around the cabinet, and - 50 cm high For this reason, and also to avoid the presence of hazardous vapors in the atmosphere near the cabinet, we always recommend that safety cabinets are operated with an extraction fan (min. air exchange rate 10 times per hour) for proper operation in accordance with TRbF 20-L! If an extraction fan is to be used in an EX-endangered zone then it is essential that an EX-proof version is used! Models Extraction from individual safety cabinets For mounting directly on the storelab safety cabinet - complicated connections from the extraction fan to the safety cabinet are no longer necessary! - Not suitable for fume hood underbenches - With mounting plate for easy mounting on cabinet roof - suction side of fan is connected If the safety cabinet is used together with an extraction fan then it is no longer necessary to set up and maintain an EX-zone around the safety cabinet! Installation example: Models Models Extraction from several safety cabinets Extraction fan with mounting base, for separate installation beside (e.g. on wall of room) or on the safety cabinet - Suitable for all storelab safety cabinets - With mounting plate for easy mounting on cabinet roof Models Plug-in versions Easy extraction fan connection (suction side) with DN 80 flexible aluminium tubing, with earthed plug and 2 m connection cable. - Not suitable for fume hood underbenches - For mounting on safety cabinet Installation example: Models Model 8 with exhaust air monitoring: - Extraction fan operation checked by monitoring the air flow - Acoustic message if extraction fan stops working or safety cabinet ventilation slots become blocked Installation example: Models Description Model 1 Model 3 Model 9 Model 5 Model 7 Model 10 Model 4 Model 8 EX-proof NO YES YES NO YES YES NO NO Electricity supply 230 V 400 V 230 V 230 V 400 V 230 V 230 V 230 V Weight (kg) 6,0 6,0 6,0 6,0 6,0 6,0 7,5 7,5 Article No. B A B A B A B A B A B A B A B A All extraction fans comply with EU Directive 94/9/EU (ATEX) Connection work to be done by customer! 140

141 HAZARDOUS SUBSTANCES FILTER ATTACHMENT FOR SAFETY CABINETS The LACONT hazardous substances filter attachment GFA Basic works with forced air circulation and is used for the technical ventilation of storelab safety cabinets type 30 / type 90 as per EN for the storage of flammable liquids. Because of its quiet operation the LACONT hazardous substances filter attachment GFA Basic is ideal for direct use at the workplace. Functioning, display and operation: The LACONT hazardous substances filter attachment Basic reacts to coarse particulate contaminants (dust, etc.) as well as to strong contamination of the exhaust air by hydrocarbon vapors and gases. A saturated filter is indicated by warning LEDs. Hydrocarbon vapors are removed from the exhaust air from the cabinet by passing it through the built-in active charcoal filter so that the air can be discharged directly into the room atmosphere. The special feature of the filter is its tandem structure. If the main filter is saturated, the second integrated filter ensures additional security over a period up to 14 days. In order to ensure hazard-free working conditions the LACONT hazardous substances filter attachment Basic should be serviced and its functions checked by an expert at least once per year. The tandem active charcoal filter should be replaced during this check. Technical data: Housing: Powder-coated sheet steel, RAL light grey External dimensions W x D x H (mm): 310 x 510 x 210 Motor performance: 0,03 kw Nominal voltage: 230 V Frequency: 50 Hz Current consumption: 0,2 A Noise level: < 42 db (A) Net weight (without filter): 10 kg Weight of active charcoal filter: 3 kg Volume flow (at cabinet): 25 m 3 /h Benefits: If a LACONT hazardous substances filter attachment GFA Basic is used then it is no longer necessary to maintain an explosion-endangered zone around the safety cabinet (see TRbF 20 Annex L # 4.2.), as proved by a test report issued by a authorized testing, monitoring and certification office (test laboratory accredited by the German Accreditation Council DAR) Exhaust ducts venting in the open air are no longer necessary, therefore no cost-intensive installation work is required No room atmosphere pollution due to virtually 100% filtering of all solvent vapours - employee health protection! Low service and maintenance costs Description Hazardous substances filter attachment GFA Basic Attachment adapter for storelab type 30/90 cabinets Attachment adapter for storelab CHS 950 / SiBox Attachment adapter for storelab SiS-FAS Type 90/900 Attachment adapter for storelab SiS-FAS Type 90/1550 Article No. B A B A B A B A included Further attachment adapters for older safety cabinets available on request! 141

142 SAFETY CABINETS FOR AIRBAGS The storage of explosive substances and devices containing explosive substances, such as airbag and seat belt tensioning units, is not permitted in the direct vicinity of the workplace. An exception is made for storage devices that have been specially designed for this purpose. AIRBAG - CABINET TYPE 90 / 900 AIR Approved for storage of airbags and seat belt tensioning units of class PT1 and PT2 as well as storage group 1.4 Whole construction tested and approved by BAM Berlin by explosion test Fire resistance by test certificate of >90 minutes (according to EN type 90) Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Doors in RAL daffodil yellow Doors with cylinder lock - special safety lock system Stainless steel base plate - Niro Rhombus Inner body made from HPL-coated sheets RAL light grey Automatic thermal closing mechanism if fire occurs Doors after temperature increase to 50 C and Inlet and outlet channels after temperature increase to 70 C (±10 C) Markings according to EN / TRbF 20-L / ISO 3864 Approved by BAM Berlin SiS Type 90 / 900 Air, Article No. B A With inner fittings: Four storing levels height-adjustable at intervals of 25 mm Corrosion resistance by galvanized shelf system Complete electrostatic interconnection of all components and inner fittings by built-in grounding cable harness - grounding connection on cabinet roof SiS Type 90 / 900 Air, Article No. B A EN Model SiS Type 90 / 900 Air External dimensions W x D x H (mm) 900 x 900 x 1935 Internal dimensions W x D x H (mm) 797 x 735 x 1580 Doors 2 Weight (kg) 530 Article No., outer body: RAL light grey, doors: RAL daffodil yellow Accessories Socle, tested acc. to type 90 cabinets W x D x H (mm) = 900 x 900 x 113 Additional grid-type storage level B A Article No. B A B A Fulfils the requirements of the second directive to the Explosive Substances Law 2 Annex No. 4 for the storage of small amounts as per Test Report BAM Berlin! 142

143 SAFETY CABINETS FOR DOCUMENTS SAFETY CABINETS FOR DOCUMENTS DKS TYPE 90 / 1200 AND DKS TYPE 90 / 1400 For reduction and prevention of the fire load in corridors, emergency exits and escape routes Whole construction tested and approved by an authorized materials testing institute as per EN (type 90) with a fire resistance >90 minutes Insulation according to DIN 4102 Outer body made from powder-coated sheet steel in RAL light grey Inner body made from HPL-coated sheets - RAL 7035 Leveling feet for installing cabinet horizontally Stainless steel base plate - Niro Rhombus Doors with cylinder lock (simultaneous closing) Available with or without automatic door closing device With inner fittings: 4 shelves, powder-coated RAL light grey DKS Type 90 / 1200: 5 storage levels à 13 A4-files DKS Type 90 / 1400: 5 storage levels à 15 A4-files DKS Type 90 / 1200, Article No. B A EN DKS Type 90 / 1200, special version with pull-out suspension files - cabinets with automatic door closing device: with fire chamber test as per EN (90 min.), - cabinets without automatic door closing device: construction based on EN Model DKS Type 90 / 1200 DKS Type 90 / 1200 DKS Type 90 / 1400 DKS Type 90 / 1400 External dimensions W x D x H (mm) 1190 x 598 x x 598 x x 598 x x 598 x 1935 Internal dimensions W x D x H (mm) 1087 x 430 x x 430 x x 430 x x 430 x 1741 Doors Storage levels Storing height (mm) Storage capacity 5 x 13 ring files A4 5 x 13 ring files A4 5 x 15 ring files A4 5 x 15 ring files A4 Fitting without automatic with automatic without automatic with automatic door closing device door closing device door closing device door closing device Weight (kg) Material inner fittings Article No., RAL light grey sheet steel B A B A B A B A Accessory Material Article No. Article No. Article No. Article No. Additional shelf sheet steel B A B A B A B A 143

144 STORAGE OF PRESSURIZED GAS CYLINDERS PRACTICAL INFORMATION 6 What has changed since the introduction of EN (Safety cabinets for pressurized gas cylinders)? Changes occurred for manufacturers and users of pressurized gas safety cabinets when European Standard EN came into force in 2006, as now for the first time in the history of safety cabinets this standard was to be implemented throughout Europe: The classification of the fire resistance capability has been divided into 4 classes: G 15 = 15 minutes G 30 = 30 minutes G 60 = 60 minutes G 90 = 90 minutes EN describes the construction and safety criteria for safety cabinets to be used in laboratories for the storage of pressurized gas cylinders at normal room temperatures. However, in Germany TRG 280 (Technical Regulations for Gases) applies as the basis for the storage of pressurized gas cylinders. According to TRG 280 the following principles must be observed (further details and requirements can be found in TRG 280): STORAGE (TRG ): Storage is to be understood as keeping a stock of pressurized gas cylinders. Storage is not to be understood as connecting up pressurized gas cylinders for emptying them, or for keeping them ready for service and maintenance purposes. AVAILABILITY (TRG ): Availability is to be understood as keeping filled pressurized gas cylinders at the places intended for their use as reserve cylinders, either connected to or ready to be connected to a gas supply device, to the extent that is necessary for allowing continuation of work. It is also to be understood as keeping filled pressurized gas cylinders at the workplace for manual gas supply. STORAGE in ROOMS (TRG ): Rooms intended for the storage of pressurized gas cylinders must be separated from neighbouring rooms by at least fire-retarding components. Fire-retarding components are required if fire and explosion hazards exist in neighbouring rooms not used for the storage of pressurized gas cylinders. FIRE-RETARDING in the meaning of TRG (TRG ) is the fire performance of components as per DIN 4102 for an exposure period of 30 minutes (fire resistance class F 30). FIRE-RESISTANT in the meaning of TRG (TRG ) is the fire performance of components as per DIN 4102 for an exposure period of 90 minutes (fire resistance class F 90). BGR Guidelines for Laboratories (formerly ZH 1/119): To avoid risks pressurized gas cylinders have to be stored outside the laboratories if possible and the gases supplied to the workplaces by permanently laid pipelines. If this is not possible, and if pressurized gas cylinders have to be used in laboratories with an increased fire risk then, in the case of fire, the pressurized gas cylinders have to be protected against excessive heat by taking appropriate protective measures (storage in gas cylinder safety cabinets as per EN Even today it is not entirely regulated which fire resistance capabilities apply in laboratories for users in Germany. The current European harmonisation of requirements and regulations is increasingly transferring the responsibility to the user. Today as manufacturers we offer safety cabinets with a fire resistance capability of G 30. This is in accordance with the previous state of the art in Europe, as per EN The corresponding protective aims must be achieved: (EN Introduction: The fire resistance capability should allow personnel to leave the workroom and allow fire-fighters to reach the location before the pressurized gas cylinders become unstable ). 144

145 SAFETY CABINETS FOR GAS CYLINDERS SiZ G30 / Approved for storage of pressurized gas cylinders at the workplace as per EN (G 30) Whole construction tested and approved by an authorized materials testing institute as per EN Insulation according to DIN 4102 Outer body made from powder-coated sheet steel, RAL light grey, door/s either in RAL light grey or RAL daffodil yellow Inner body made from HPL-coated sheets - RAL 7035 Stainless steel base plate - Niro Rhombus Automatic thermal closing mechanism if fire occurs: inlet and outlet channels after temperature increase to 70 C (± 10 C) DN 80 ventilation connection for exhaust air extraction Leveling feet for installing cabinet horizontally Door/s with cylinder lock With inner fittings: 1 x stainless steel floor plate 1 x holder for 50 liter gas cylinder per cylinder place 2 x horizontal C-rails for attaching gas fittings EN SiZ G30/1200, Article No. B C, with side-mounted shelf, available as accessory Extraction fans please see page 140! Model SiZ G30/600 SiZ G30/900 SiZ G30/1200 SiZ G30/1400 External dimensions W x D x H (mm) 595 x 598 x x 598 x x 598 x x 598 x 2015 Internal dimensions W x D x H (mm) 492 x 430 x x 430 x x 430 x x 430 x 1785 Capacity up to 2 up to 3 up to 4 up to 4 50 l gas cylinders 50 l gas cylinders 50 l gas cylinders 50 l gas cylinders Door/s 1 (DIN right) Weight (kg) Outer body: RAL light grey Article No., door/s: RAL light grey B C B C B C B C Article No., door/s: RAL daffodil yellow B G B G B G B G Accessories Shelf* B C B C B C B C Side-mounted shelf suitable for all models B C Drive-in ramp, stainless steel V2A suitable for all models B A *) Shelf across whole width of safety cabinet, powder-coated sheet steel in RAL light grey SiZ G30/600, Article No. B C 145

146 TRG CELLS TRG 700 / TRG 1050 / TRG 1400 For the storage of pressurized gas cylinders as per TRG 280 indoors and outdoors Outer body made from galvanized sheet steel, powder-coated in RAL light grey High corrosion protection Can also be used indoors depending on defined fire load - see TRG 280, BGR 120 and TRGS 526 Storage and operation even without compliance of protection zones as per TRG 280 Roof inclined towards front Stainless steel floor to prevent impact damage Stainless steel base plate - Niro Rhombus Ventilation slots in door(s) and below projecting roof Cabinet roof prepared for on-site technical forced ventilation system DN 75 Door(s) with cylinder lock Marked with warning symbol W19 Fully equipped TRG cells: 2 x vertical c-rails on back wall 2 x height- adjustable, horizontal c-rails for mounting fittings 1 x cylinder holder (tension belt) for 50 liters gas cylinders Outlets in roof for pipe penetration (ø 25 mm) including filler plug TRG 700, Article No. C B TRG 1050, Article No. C B TRG 1400, Article No. C B 146

147 TRG CELLS TRG 700 / TRG 1050 / TRG 1400 For storage of pressurized gas cylinders in accordance with TRG 280 indoors and outdoors TRG 1050, Article No. C B with two optional side-mounted shelves, Article No. B C TRG 1400, Article No. C B with two optional side-mounted shelves, Article No. B C TRG 1050, Art. No. C B, with optional suspended shelf, Art. No. C B Top view of the roof with prepared pipe penetrations and exhaust air connection Model TRG 700 TRG 1050 TRG 1400 External dimensions W x D x H (mm) 700 x 400 x x 400 x x 400 x 2150 Door/s 1, hinged right double door double door Pipe penetrations Capacity 50 liter gas cylinders up to 2 up to 3 up to 4 Weight (kg) Outer body: RAL light grey Article No., door/s sheet steel RAL light grey C B C B C B Article No., door/s sheet steel RAL light grey with plexiglass segment C B C B C B Accessories Article No. Article No. Article No. Suspended shelf* C B C B C B Side-mounted shelf C B C B C B TRG 700, Article No. C B *) regarding entire width of particular gas cylinder safety cabinet, made from powder-coated sheet steel in RAL light grey 147

148 COMPARISON VBF AND BETRSICHV PRACTICAL INFORMATION 7 Changes for VbF-plants by the new Ordinance on Industrial Safety and Health as from January 1st, 2003 According to the VbF-plants (e.g. stocks for flammable liquids) there are formal changes by the new Ordinance on Industrial Safety and Health. By termination of the VbF (Regulation concerning flammable liquids) requirements of the new BetrSichV (Ordinance on Industrial Safety and Health) will be valid for January 1st, 2003 with reference to the required supervision of VbF-plants. For categorizing flammable liquids previous hazard classes A I, A II, A III and B will be replaced by designations from hazardous substances law ( flammable, easily flammable, highly flammable ). According to the new regulations of BetrSichV VbF-plants of the former hazard class A III will not be anymore classified as requiring supervision plants. In addition, there are formal reliefs for VbF-plants as follows: licensing requirement, but no longer any duty of disclosure. Furthermore qualifying quantities are excluded for the licensing requirement. As part of the repeal of VbF technical regulations for flammable liquids (TRbFs) have to be transferred into technical regulations for operating safety based on formal reasons. Until this has happened and corresponding new technical regulations will be released, TRbFs keep valid in its current mode. 1. Comparison VbF vs. BetrSichV designations Designation VbF Criteria Designation BetrSichV A I Liquids with flashpoint (FP) < 21 C highly flammable or easily flammable A II Liquids with FP from 21 C to 55 C flammable A III Liquids with FP above 55 C to 100 C - none, according to new BetrSichV there is no need of monitoring former A III-plants B Liquids with FP < 21 C, water-soluble highly flammable or easily flammable at 15 C or whose liquid components are water-soluble at 15 C 2. Classification according to hazardous substances law for liquid substances and BetrSichV taken as a basis Designation Hazard symbol R-phrase Criteria highly flammable F+ R 12 Liquid substances / preparation, with FP < 0 C and boiling point (SP) of 35 C easily flammable R 11 easily flammable : solid substances / preparation with FP < 21 C (but not highly flammable) F R 15 Contact with water liberates highly flammable gases ; substances / preparations, develops highly flammable gases in dangerous quantities in contact with water/moist air (minimum quantity 1 l/kg/h). R 17 Spontaneously flammable in air ; substances / preparations, could heat and finally ignite at ordinary temperature in the air without energy input. flammable / R 10 Liquid substances / preparations with FP of at least 21 C and 55 C at most 3. Comparison: Duty of disclosure and licensing requirement, respectively about handling with flammable liquids according to VbF and BetrSichV Designation Duty of disclosure Duty of disclosure Licensing requirement Licensing requirement VbF BetrSichV VbF BetrSichV A I 450 until liters - > liters > liters A II until liters - > liters - B until liters - - > liters Duty of disclosure no longer required For storage facilities / filling stations with flammable liquids (former A II), licensing requirement no longer required Qualifying quantities will be scaled up from and liters, respectively to liters concerning licensing requirement of storage facilities. 148

149 TABLE OF CONTENTS - OUTDOOR STORAGE SYSTEMS 4. Outdoor storage systems... Our outdoor storage systems are available in our standard color RAL sky blue (if not specified separately) Stations for hazardous substances page Safety storage depots / safety storehouses page Water protection storage halls page Outdoor pallet racks page 162 Quick-Up hazardous goods containers page 163 Water protection compartment containers page Thermo-Containers page Heated chambers page Projects / plant construction page

150 STATIONS FOR HAZARDOUS SUBSTANCES Small and medium-sized companies normally have a large number of different-sized containers with contents that represent an environmental hazard. If these are then to be stored at a particular location, with some of them vertical and some horizontal, this frequently causes problems. In such cases our stations for hazardous substances supply the ideal solution based on legal requirements. Universal use due to variable inner fittings Lockable pneumatically sprung cover Storage of containers up to 220 liters capacity Corrosion protected by primer and painting or fire galvanizing Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin 2GSKS, with shelving as special equipment 2GSKS / Gitt, with shelving as special equipment 2GSKS, Article No. P A 2GSKS, with shelving as special equipment 150

151 STATIONS FOR HAZARDOUS SUBSTANCES Made from 3 mm sheet steel Removable galvanized grids 100 mm ground clearance with fork-lift supports Version NB with natural ventilation for passive storage of flammable substances Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin All standard models as shown, but without shelving! 2GSKS, with shelving as special equipment Approved for water-endangering liquids for flammable liquids Model GSKS GSKS / Gitt GSKS / NB Capacity, 200 liter drums Dimensions W x D (mm) 1410 x x x x x x 1290 Total height (mm) Clear compartment height (mm) Sump capacity (l) Article No., painted P A P A P A P A P C P C Article No., galvanized P A P A P A P A P C P C Accessories: One additional grid as storage level with shelf supports and crossbeams for 2 drum types Grid dimensions W x D (mm) 1260 x 500 ( whole width) 650 x 500 (half width) Compartment height (mm) bottom 485 / top 465 bottom 485 / top 465 Storage possibilities on these levels Article No., small containers only P B P B Article No., 1 x 60 liter drum horizontal and small containers P B P B Article No., 2 x 60 liter drums horizontal and small containers P B - Article No., 3 x 60 liter drums horizontal P B - Two additional grids as storage level with shelf supports and crossbeams for 2 drum types Grid dimensions W x D (mm) 2 x 1260 x 500 (whole width) 2 x 650 x 500 (half width) Compartment height (top) for 60 liter drums (mm) 1 x x 465 (bottom) for small containers (mm) 2 x x 205 Storage possibilities on these levels Article No., small containers only P B P B Article No., 1 x 60 liter drum horizontal and small containers P B P B Article No., 2 x 60 liter drums horizontal and small containers P B - Article No., 3 x 60 liter drums horizontal and small containers P B - Additional storage levels for 4 drum models available on request! 151

152 SAFETY STORAGE DEPOTS SAFETY STORAGE DEPOTS Approved for the storage of water-endangering substances These compact storage depots have been specially developed for drum and KTC/IBC storage on the basis of our practically-proven safety storehouses. Due to their generous dimensions it is possible to store 200 liter drums directly above the base sump tray or also on euro- or chemical pallets. There is also sufficient space available for storing large containers (KTC / IBC). Approval-No.: Z General Technical Approval DIBt Berlin SLH 1 x 1, Article No. H B Special container construction: Made from specially profiled galvanized sheet steel Reinforced roof and base profile frames Circumferential splash protection made from sheet steel, except in door area 1- wing door, W x H (mm) = 1300 x 1580, lockable with safety lock Built-in weather-protected ventilation slots in door and sidewalls SLH 1,5 x 1,5, Article No. H B Base sump tray: Made from 3 mm fire galvanized sheet steel Galvanized grid as support level Ground clearance 100 mm, for model SLH 1,5 x 1,5 KTC 60 mm SLH 1,5 x 1,5 KTC, Article No. H B SLH 1,5 x 1,5 KTC, thermally insulated version, price on request! Model SLH 1 x 1 SLH 1,5 x 1,5 SLH 1,5 x 1,5 KTC External dimensions W x D x H (mm) 1700 x 1300 x x 1700 x x 1700 x 2210 Internal dimensions W x D x H (mm) 1570 x 1170 x x 1570 x x 1570 x 1650 Sump capacity (l) Capacity 2 x 200 liter drums 4 x 200 liter drums 1 x KTC Weight (kg) Art. No., galvanized H B H B H B Art. No., galvanized, exterior painted H B H B H B 152

153 SAFETY STORAGE DEPOTS SAFETY STORAGE DEPOTS WITH NATURAL VENTILATION Approved for the passive storage of flammable liquids Special container construction: Made from specially profiled galvanized sheet steel Reinforced roof and base profile frames Circumferential splash protection made from sheet steel, except in door area 1- wing door, W x H (mm) = 1300 x 1580, lockable with safety lock Built-in weather-protected ventilation slots Approval-No.: Z in door and sidewalls Base sump tray: General Technical Approval Made from 3 mm fire galvanized sheet steel DIBt Berlin Galvanized grid as support level Ground clearance 100 mm, for model SLH-NB 1,5 x 1,5 KTC 60 mm SLH-NB 1,5 x 1,5, Art. No. H A Natural ventilation: The legally required 0.4-fold minimum air exchance rate is achieved by the continuous ventilation slots directly above the base sump tray and the ventilation slots in the door and side walls. With ground connection for the avoidance of hazardous electrostatic charges (for Ex-zone 2). SLH-NB 1,5 x 1,5, Art. No. H A SLH-NB 1,5 x 1,5, Art. No. H A Rate of air exchange has been tested and approved in accordance with the latest requirements of DIBt Berlin! Model SLH-NB 1 x 1 SLH-NB 1,5 x 1,5 SLH-NB 1,5 x 1,5 KTC External dimensions W x D x H (mm) 1700 x 1300 x x 1700 x x 1700 x 2355 Internal dimensions W x D x H (mm) 1570 x 1170 x x 1570 x x 1570 x 1790 Sump capacity (l) Capacity 2 x 200 liter drums 4 x 200 liter drums 1 x KTC Weight (kg) Art. No., galvanized H A H A H A Art. No., galvanized, exterior painted H A H A H A 153

154 SAFETY STOREHOUSES The safety storehouse is a proved, favorably priced mobile outdoor storage facility for hazardous substances. It can be transported unloaded at any time using a fork-lift truck or crane. Thanks to its modular design there are 10 types for selection. This allows the system to be optimally adapted to suit the user s actual requirements. If equipped with shelving the safety storehouse is ideally suited for use as a walk-in store for small containers. Our standard - double door and lifting attachments for cranes! Base sump tray with grid support Made from 3 mm fire galvanized sheet steel Max. load 1000 kg / m 2, higher loads on request Ground clearance 60 mm Sump capacity 10% of possible total storage capacity SLH 1 x 2, galvanized with painted exterior, Article No. H B, with optional shelving Approval-No.: Z General Technical Approval DIBt Berlin Optional drive-on ramp for drum carts Technical forced ventilation, ex-proof Grid shelving, galvanized, Art. No. H C Skylight panel, different versions on request. Not approved for the storage of flammable liquids Special container construction Made from specially profiled galvanized sheet steel Reinforced roof and base profile frames Circumferential splash protection made from sheet steel, except in door area Galvanized steel double door with ventilation slots, 1950 mm wide, lockable with safety lock Model SLH 3 x 2: door width 1750 mm Built-in weather-protected ventilation slots in door and opposite rear panel Lifting attachments for cranes as standard Our standard - double door and lifting attachments for cranes! Double door in longer side as standard, doors in shorter side on request! SLH 2 x 2, galvanized, Article No. H B 154

155 SAFETY STOREHOUSES For the storage of water-endangering substances For the active storage of flammable liquids a forced ventilation is required. Mounted delivery (SLH 5 x 4 and SLH 5 x 6 premounted). Our standard - double door and lifting attachments for cranes! Also available with insulation and heating, please see page 158 / 159! SLH 5 x 4, galvanized, Article No. H A Model SLH 1 x 2 SLH 2 x 2 SLH 3 x 2 SLH 4 x 2 SLH 5 x 2 External dimensions W x D x H (mm) 2075 x 1075 x x 2075 x x 2075 x x 2075 x x 2075 x 2375 Internal dimensions W x D x H (mm) 1980 x 980 x x 1980 x x 1980 x x 1980 x x 1980 x 1970 Sump capacity (l) Delivery mounted mounted mounted mounted mounted Art. No., galvanized H B H B H B H B H B Art. No., galvanized and exterior painted H B H B H B H B H B Model SLH 6 x 2 SLH 4 x 3 SLH 6 x 3 SLH 5 x 4 SLH 5 x 6 External dimensions W x D x H (mm) 6075 x 2075 x x 2875 x x 2875 x x 4200 x x 6300 x 2585 Internal dimensions W x D x H (mm) 5980 x 1980 x x 2780 x x 2780 x x 4080 x x 6180 x 1900 Sump capacity (l) x x x x 1200 Delivery mounted mounted mounted 2 components 3 components premounted, final premounted, final installation provided installation provided by the customer by the customer Art. No., galvanized H B H C H C H A H A Art. No., galvanized and exterior painted H B H C H C H A H A Safety storehouses for storing aggressive media (base sump tray with PE insert) on request! Our standard - double door and lifting attachments for cranes! With inner fittings: Shelf supports vertical, premounted Shelf arm horizontal, 500 mm* Shelf grid level W x D (mm) = 800 x 500 Shelf grid level W x D (mm) = 1800 x 500 Shelf grid level W x D (mm) = 2600 x 500 Ramp L x W x H (mm) = 1200 x 1000 x 320 for drum cart Ramp L x W x H (mm) = 2900 x 1000 x 320 for pallet truck Article No. H B H B H C H C H C H D H C * Capacity per shelf arm 50 kg Accessories: electrical installations (premounted at delivery) Technical forced ex-proof ventilation Moisture-proof lamp 230 V Lamp 230 V ex-proof Article No. H C H B H B If order includes switch box (H A) electrical components are fully assembled and wired to external switch box. Only RCD protected supply line and connection is to be provided by the customer. SLH 3 x 2, galvanized and exterior painted, Art. No. H B Accessories: Shelving Grid shelving with 3 storage levels, premounted on the container wall, galvanized, dimensions W x D (mm) = 800 x 500 Grid shelving with 3 storage levels, premounted on the container wall, galvanized, dimensions W x D (mm) = 1800 x 500 Grid shelving with 3 storage levels, premounted on the container wall, galvanized, dimensions W x D (mm) = 2600 x 500 Article No. H C H C H C 155

156 SAFETY STOREHOUSES SAFETY STOREHOUSES WITH NATURAL VENTILATION For the passive storage of flammable liquids The legally required 0.4-fold minimum air exchance rate is achieved by continuous ventilation slots directly above the base sump tray and ventilation slots in the upper area of back wall and door Ground connection to avoid dangerous electrostatic charges (for ex zone 2) Mounted delivery (SLH-NB 5 x 4 and SLH-NB 5 x 6 premounted) Our standard - double door and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin Safety storehouse SLH-NB 3 x 2, galvanized, Article No. H A, with optional ramp Rate of air exchange has been tested and approved in accordance with the latest requirements of DIBt Berlin! Accessories such as lightning, ramps and shelves please see page 155! Equipped with shelving for use as small container storehouse 156

157 SAFETY STOREHOUSES SAFETY STOREHOUSES WITH NATURAL VENTILATION Rate of air exchange has been tested and approved in accordance with the latest requirements of DIBt Berlin (please see practical information on page 165, Ventilation of hazardous substances storages) Our standard - double door and lifting attachments for cranes! Safety storehouse SLH-NB 5 x 2, galvanized, Article No. H A Our standard - double door and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin Double door in long side as standard, doors in short side on request! Safety storehouse SLH-NB 2 x 2, galvanized, Article No. H A Model SLH-NB 1 x 2 SLH-NB 2 x 2 SLH-NB 3 x 2 SLH-NB 4 x 2 SLH-NB 5 x 2 External dimensions W x D x H (mm) 2075 x 1075 x x 2075 x x 2075 x x 2075 x x 2075 x 2565 Internal dimensions W x D x H (mm) 1980 x 980 x x 1980 x x 1980 x x 1980 x x 1980 x 2150 Sump capacity (l) Delivery mounted mounted mounted mounted mounted Art. No., galvanized H A H A H A H A H A Art. No., galvanized and exterior painted H A H A H A H A H A Model SLH-NB 6 x 2 SLH-NB 4 x 3 SLH-NB 6 x 3 SLH-NB 5 x 4 SLH-NB 5 x 6 External dimensions W x D x H (mm) 6075 x 2075 x x 2875 x x 2875 x x 4200 x x 6300 x 2770 Internal dimensions W x D x H (mm) 5980 x 1980 x x 2780 x x 2780 x x 4080 x x 6180 x 2080 Sump capacity (l) x x x x 1200 Delivery mounted mounted mounted 2 components, 3 components, premounted, final premounted, final installation provided installation provided by the customer by the customer Art. No., galvanized H A H C H C H A H A Art. No., galvanized and exterior painted H A H C H C H A H A 157

158 THERMO SAFETY STOREHOUSES For storing hazardous substances frost-free or at constant temperature Our standard - double door and lifting attachments for cranes! Mounted delivery (SLT 5 x 4 and SLT 5 x 6 premounted) Safety storehouse insulation: insides of all walls, roof and doors fitted with 60 mm thick, non-flammable insulation material Insulation of base sump tray optional Heating according to size and required interior temperature Circumferential splash protection made from sheet steel, except in door area With ground connection to avoid dangerous electrostatic charges (for Ex-zone 2) For the storage of flammable liquids a forced ventilation system is required. Thermo safety storehouse SLT 3 x 2, galvanized, with special fittings Our standard - double door and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin Double door in long side as standard, doors in short side on request! Thermo safety storehouse SLT 6 x 3, galvanized Equipped with shelving for use as small container storehouse Equipped with shelving for use as small container storehouse 158

159 THERMO SAFETY STOREHOUSES Our standard - double door and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin Thermo safety storehouse SLT 5 x 2, galvanized and outside painted, with optional fittings Model SLT 1 x 2 SLT 2 x 2 SLT 3 x 2 SLT 4 x 2 SLT 5 x 2 External dimensions W x D x H (mm) 2075 x 1075 x x 2075 x x 2075 x x 2075 x x 2075 x 2375 Internal dimensions W x D x H (mm) 1840 x 910 x x 1840 x x 1840 x x 1840 x x 1840 x 1900 Sump capacity (l) Delivery mounted mounted mounted mounted mounted Art. No., galvanized H A H A H A H A H A Art. No., galvanized and exterior painted H A H A H A H A H A Accessories for model SLT 1 x 2 SLT 2 x 2 SLT 3 x 2 SLT 4 x 2 SLT 5 x 2 Base sump tray insulation H A H A H A H A H A Model SLT 6 x 2 SLT 4 x 3 SLT 6 x 3 SLT 5 x 4 SLT 5 x 6 External dimensions W x D x H (mm) 6075 x 2075 x x 2875 x x 2875 x x 4200 x x 6300 x 2585 Internal dimensions W x D x H (mm) 5840 x 1840 x x 2640 x x 2640 x x 3940 x x 6040 x 1900 Sump capacity (l) x x x x 1200 Delivery mounted mounted mounted 2 components, 3 components, premounted, final premounted, final installation provided installation provided by the customer by the customer Art. No., galvanized H A H C H C H A H A Art. No., galvanized and exterior painted H A H C H C H A H A Accessories for model SLT 6 x 2 SLT 4 x 3 SLT 6 x 3 SLT 5 x 4 SLT 5 x 6 Base sump tray insulation H A H A H A H A H A Switchbox Article No. H A For accessories such as forced ventilation, lamps and shelving see page 155! Electric heating, 2 kw, ex-proof Convection heating 5 kw, not ex-proof Electric switchbox (exterior) Electric heating, premounted in factory, including collision protection Heating ex-proof, T3 2 kw / 230 V 3 kw / 230 V 2 x 2 kw / 230 V Frost-free storage* 1x2 / 2x2 / 3x2 6x2 / 6x3 5x6 for SLT-model: 4x2 / 5x2 / 4x3 5x4 Article No. H A H A H A Heating not ex-proof 2 kw / 230 V 3 kw / 230 V 5 kw / 400 V Frost-free storage* 1x2 / 2x2 / 3x2 6x2 / 6x3 5x6 for SLT-model: 4x2 / 5x2 / 4x3 5x4 Article No. H A H A H A * Requires base sump tray insulation 159

160 WATER PROTECTION STORAGE HALLS By using water protection storage halls a generously dimensioned storage facility for hazardous goods can be set up quickly at a favorable price. The standard double wing door (W x H 2,3 x 2,4 m) permits convenient handling with all commercially available transport aids. Stable construction made from specially profiled and galvanized sheet steel; auditable statics High-impact roof up to 180 kg/m 2 Double-wing door, galvanized (W x H mm = 2300 x 2400), lockable with safety lock Built-in floor safety elements made from 3 mm sheet steel with removable fire galvanized grid supports Dismounted delivery with assembly instructions for easy self-assembly Wide range of accessories Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin WS-LH 5 x 6, Article No. H B, with optional shelving, drive-on ramp and additional outer painting Equipped with shelving and skylight panel in roof (on request) Equipped with shelving for use as small container store 160

161 WATER PROTECTION STORAGE HALLS Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin If flammable liquids are to be stored then forced ventilation is required. Water protection storage hall, special version with thermal insulation Equipped with shelving for use as small container store Skylight panel 2 x 2 m in roof, price on request Model WS-LH 5 x 6 WS-LH 5 x 8 WS-LH 5 x 10 External dimensions W x D x H (mm) 5100 x 6100 x x 8100 x x x 3030 Internal height (mm) Base area (m 2 ) Sump capacity (l) 6 x x x 200 Max base sump tray load (kg/m 2 ) Article No., galvanized H B H B H B Accessories Shelf support, vertical Shelf arm, horizontal, 500 mm Grid-type shelf, W x D (mm) = 800 x 500 Grid-type shelf, W x D (mm) = 1800 x 500 Grid-type shelf, W x D (mm) = 2600 x 500 Ramp L x W x H (mm) = 1000 x 1000 x 80 Splash-protection panel, galvanized, height 500 mm, per running metre Article No. H B H B H C H C H C H B H B Further accessories such as skylight panels in the roof, anti-condensation coating, windows or electrical fittings such as lighting or forced ventilation available on request! 161

162 OUTDOOR PALLET RACKS OUTDOOR PALLET RACKS WITH SUMP PALLET Outdoor pallet racks are used wherever quick and favorably priced solutions to storage problems are required. Supplied in kit form; after only a short assembly time the rack is read for use as a store for hazardous substances. All shelving parts fire-galvanized Trapezoidal roof made from galvanized sheet steel Projecting roof as weather protection Galvanized sidewalls available as accessories Fire-galvanized sump pallets without grid support Suitable for storage of goods on pallets and 1000 liter containers Favorably priced delivery in kit form for self-assembly Further accessories such as rear walls, grid supports, collision protection and support panels available on request! FPR-W-2736, Article No. R A Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin FPR-W-5436, Article No. R A Model FPR-W-2736 FPR-W-5436 Rack external dimensions W x D x H (mm) 3170 x 1700 x x 1700 x 3700 Clear compartment width (mm) x 2700 Storage levels 2 2 Capacity 6 euro-pallets or 4 KTC/IBCs 12 euro-pallets or 8 KTC/IBCs Max. compartment load (kg) Sump capacity (l) x 1000 Article No. R A R A Accessories Pair of sidewalls Grid support level W x D (mm) = 2680 x 1100 Collision protection corner Article No. R A R A R A 162

163 QUICK-UP HAZARDOUS GOODS CONTAINER DRUM AND KTC/IBC STORAGE OUTDOORS For the storage of water-endangering substances and passive storage of flammable liquids Quick-Up hazardous substances containers are a favorably priced alternative to conventional hazardous substances containers. They are delivered in kit form and are ready for use after a short assembly time. Roof, side and back walls as well as doors made from special profiled, galvanized sheet steel Supporting frame galvanized and horizontal beam fire-galvanized Sump pallets made from 3 mm galvanized sheet steel with Ü-sign according to steel trough guidelines Suitable for storing pallets and KTC/IBC Favorably priced delivery in kit form for self-assembly QGC 2/3000, Article No. R D 07:00 am 09:00 am 11:00 am Building Regulations List A, Part 1 steel troughs guidelines TüV-Nord systems DIBt Berlin QGC 2/6000, Article No. R D Model QGC 2/3000 QGC 2/6000 Numbers of storage levels 2 2 External dimensions W x D x H (mm) 3170 x 1700 x x 1700 x 3700 Clear compartment dimensions W x D x H (mm) 2700 x 1250 x x 2700 x 1250 x 1300 Sump capacity (l) x 1000 Capacity of 200 liter drums on Euro-pallets Chemical pallets Capacity of KTC/IBC 4 8 Article No., with hinged doors R D - Article No., with sliding doors - R D Accessories Grid support level W x D (mm) = 2680 x 1100 Collision protection corner Article No. R A R A 163

164 WATER PROTECTION COMPARTMENT CONTAINERS Water protection compartment containers have proven for years as cost-effective solution according to regulations for the storage of hazardous substances in drums and KTC/IBCs. They carry out their duty in various places and under several operating conditions all over Europe. Based on this experience and different customers needs we have extended our range by several new variants of water protection compartment containers. With this extensive complete range we are able to solve each user problem. Advantages: Compact storage of hazardous substances with limited space Container construction makes a large variety of equipment options possible according to regulations of substances to be stored. By using various door and gate versions all WSCs are lockable and thus there is no access for unauthorized personnel concerning hazardous substances. By equipping with natural ventilation passive storage of flammable liquids is not a problem anymore, there are no additional costs and preperatory works for the operator (e.g. power connection). All WSCs can be equipped with thermo insulation for frost-free or tempered storage. Special heating systems can be agreed individually as requested by the operator (e.g. electric heating, hot water heating or steam heating) Without large expenses relocation of a WSC is possible at any time in the case of any change in location. Approval-No.: Z General Technical Approval DIBt Berlin Concerning custom-made versions we do not have any problems with changed dimensions, higher sump capacities or other door versions! 164

165 VENTILATION OF HAZARDOUS SUBSTANCES STORAGE SYSTEMS PRACTICAL INFORMATION 8 According to the technical regulations for flammable liquids (TRbF 20) storage rooms have to be ventilated sufficiently. As listed under item 5.4.2, an at least 0.4-fold air exchange has to be guaranteed for passive storage and a 5-fold air exchange for active storage. In accordance with the regulations of DIBt Berlin a 5-fold air exchange is just possible with technical-forced ventilation. Therefore operator has to install an electrical supply line and to bear the power costs. By using natural ventilation 0.4-fold air exchange is possible. Without any extra costs for the operator due to constructional details, such as ventilation slots above the sump pallet. The effectivity of natural ventilation according to the regulations of DIBt is to be practically proved by an authorized testing institute, e.g. by means of dying out method. Our WSCs and safety storehouses are approved for passive storage of flammable liquids. Air exchange is tested and approved by an authorized testing institute. To make sure that you meet all legislative s requirements, please contact us - we look forward to assisting you (even locally)! Natural ventilation - our water protection compartment container: Passive storage: Containers will neither be opened, filled nor emptied during storage - TRbF 20 item 2.1 paragraph 5. Active storage: Containers will be used as removal containers or sumps at the storage location or opened for other purposes - TRbF 20 item 2.1 paragraph

166 WATER PROTECTION COMPARTMENT CONTAINERS OUTDOOR STORAGE OF VERTICAL DRUMS Our standard: natural ventilation and lifting attachments for cranes! Water protection compartment containers are for universal use for the storage of drums directly on the grid supports or on euro- or chemical pallets. Water protection compartment containers are particularly suitable for the storage of mixed, non-standardized container sizes. Series WSC-F-E is intended for one-sided operation; Series WSC-F-D is for two-sided use with lockable doors on each side. Approval-No.: Z General Technical Approval DIBt Berlin All water protection compartment containers with hinged doors equipped with locking bar. WSC-F-E.3-30, with hinged doors and natural ventilation, Article No. C C Different versions of water protection compartment containers: Lockable hinged or sliding doors With natural ventilation Ex-proof version with forced ventilation With PE HD tray inserts for storing particularly aggressive media Larger sump capacities if required, e.g. for storage in water protection areas or for fire-fighting water retention Our standard, your benefits: All the water protection compartment containers shown on pages are provided with natural ventilation for the passive storage of flammable substances (see practical information on page 165). This means that they can be used even more flexibly, even if the type of hazardous goods to be stored is changed! Model WSC-F-E.1-30 WSC-F-E.2-30 WSC-F-E.3-30 WSC-F-D.1-30 WSC-F-D.2-30 WSC-F-D.3-30 Number of levels External dimensions W x D x H (mm) 3130 x 1450 x x 1450 x x 1450 x x 2770 x x 2770 x x 2770 x 4505 Internal compartment dimensions W x D x H* (mm) 3010 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 1250 Sump capacity (l) x x x 650 Capacity, 200 liter drums 10 directly on 20 directly on 30 directly on 20 directly on 40 directly on 60 directly on ( examples) grid support or 8 on grid support or 16 on grid support or 24 on grid support or 16 on grid support or 32 on grid support or 48 on chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or 6 on euro-pallets 12 on euro-pallets 18 on euro-pallets 12 on euro-pallets 24 on euro-pallets 36 on euro-pallets Article No., with hinged doors and natural ventilation C C C C C C C C C C C C * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 166

167 WATER PROTECTION COMPARTMENT CONTAINERS OUTDOOR STORAGE OF VERTICAL DRUMS Our standard: natural ventilation and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin WSC-F-E.2-60, with sliding doors and natural ventilation, Article No. C C For your attention: All Water protection compartment containers with an external height of more than 3660 mm are delivered as part-assemblies. Self-assembly according to the supplied instructions is easy and after only a short time you can use your water protection compartment container for storing hazardous substances. All the necessary connections for the assembly, e.g. floor anchors, nuts and bolts, etc. are contained in the standard equipment. Optionally you can have the assembly carried out by one of our teams of specialists. This applies for all water protection compartment containers. Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.2-30, with hinged doors and natural ventilation, Article No. C C Model WSC-F-E.1-60 WSC-F-E.2-60 WSC-F-E WSC-F-E.3-60 WSC-F-D.1-60 WSC-F-D.2-60 WSC-F-D.3-60 Number of levels External dimensions W x D x H (mm) 6200 x 1530 x x 1530 x x 1540 x x 1530 x x 2930 x x 2930 x x 2930 x 4505 Internal compartment dimensions W x D x H (mm) 3010 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 1250 Sump capacity (l) 2 x x x x x x x 650 Capacity, 200 liter drums 20 directly on 40 directly on 60 directly on 60 directly on 40 directly on 80 directly on 120 directly on (examples) grid support or 16 on grid support or 32 on grid support or 48 on grid support or 48 on grid support or 32 on grid support or 64 on grid support or 96 on chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or 12 on euro-pallets 24 on euro-pallets 36 on euro-pallets 36 on euro-pallets 24 on euro-pallets 48 on euro-pallets 72 on euro-pallets Article No., with sliding doors and natural ventilation C C C C C C C C C C C C C C * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 167

168 WATER PROTECTION COMPARTMENT CONTAINERS VERTICAL STORAGE OF CHEMICAL PALLETS OUTDOORS These water protection compartment containers have been specially designed for the storage of chemical pallets. Optimal utilisation of the available floor space has been achieved for a minimal amount of investment per drum storage place. This series has proven itself to be ideal for storing goods on pallets, e.g. in the chemical industry, in paint factories, etc. and everywhere that sophisticated logistics are important. The series F-E water protection compartment containers are for use from one side only. Versions for use from both sides are available on request! Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.2-80, with sliding doors and natural ventilation, Article No. C C Approval-No.: Z Our standard: natural ventilation and lifting attachments for cranes! General Technical Approval DIBt Berlin Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.3-80, with sliding doors and natural ventilation, Article No. C C WSC-F-E.2-40, with hinged doors and natural ventilation, Article No. C C Model WSC-F-E.2-40 WSC-F-E.3-40 WSC-F-E.2-80 WSC-F-E WSC-F-E.3-80 Number of levels External dimensions W x D x H (mm) 4100 x 1450 x x 1450 x x 1530 x x 1540 x x 1530 x 4480 Internal compartment dimensions W x D x H* (mm) 3900 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 1250 Sump capacity (l) x x x 800 Capacity, 200 liter drums 24 on chemical pallets 36 on chemical pallets 48 on chemical pallets 72 on chemical pallets 72 on chemical pallets ( examples) or 16 on euro-pallets or 24 on euro-pallets or 32 on euro-pallets or 48 on euro-pallets or 48 on euro-pallets Article No., with hinged doors and natural ventilation C C C C Article No., with sliding doors and natural ventilation - - C C C C C C * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 168

169 WATER PROTECTION COMPARTMENT CONTAINERS OUTDOOR STORAGE OF HORIZONTAL 200 LITER DRUMS These water protection compartment containers for horizontal storage are designed for filling processes within the container. In the lowest storage level is in front of the drums a space consisting of fire-galvanized grids for easy filling from drums into cans or other small containers. Combination of horizontal and vertical storage (rotating drum support and can support optional) - prices on request Approval-No.: Z General Technical Approval WSC-F-E.2-30/LL, Article No. C B DIBt Berlin Accessory: Technical forced ventilation, ex-proof, Article No. H C, for active storage of flammable liquids WSC-F-E.2-60/LL, Article No. C B Model WSC-F-E.2-30/LL WSC-F-E.3-30/LL WSC-F-E.2-60/LL WSC-F-E.3-60/LL Number of levels External dimensions W x D x H (mm) 3130 x 1450 x x 1450 x x 1530 x x 1530 x 3550 Internal compartment dimensions W x D x H* (mm) 3010 x 1300 x x 1300 x x 1300 x x 1300 x 800 Sump capacity (l) x x 650 Capacity, 200 liter drums (examples) Article No., with hinged doors C B C B - - Article No., with sliding doors - - C B C B * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 169

170 WATER PROTECTION COMPARTMENT CONTAINERS OUTDOOR STORAGE FOR KTCs / IBCs Water protection compartment containers are particularly suitable for storing IBCs / KTCs. They have been proven in use under especially rough industrial conditions, such as intermediate storage facility for hazardous waste, in the electroplating industry. The series F-E water protection compartment containers are for use from one side only. Versions for use from both sides are available on request. Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.1-27, with sliding doors and natural ventilation, Article No. C C Our standard: natural ventilation and lifting attachments for cranes! Approval-No.: Z General Technical Approval DIBt Berlin WSC-F-E.2-54, with sliding doors and natural ventilation in special color, Article No. C C Model WSC-F-E.1-27 WSC-F-E.2-27 WSC-F-E.1-54 WSC-F-E.2-54 Number of levels External dimensions W x D x H (mm) 2820 x 1450 x x 1450 x x 1530 x x 1530 x 3575 Internal compartment dimensions W x D x H* (mm) 2700 x 1300 x x 1300 x x 1300 x x 1300 x 1450 Sump capacity (l) x x 1000 Capacity, KTCs / IBCs Article No., with hinged doors and natural ventilation C C C C - - Article No., with sliding doors and natural ventilation - - C C C C * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 170

171 WATER PROTECTION COMPARTMENT CONTAINERS OUTDOOR STORAGE FOR KTCs / IBCs Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.1-70, with sliding doors and natural ventilation in special color, Article No. C C Approval-No.: Z Our standard: natural ventilation and lifting attachments for cranes! General Technical Approval DIBt Berlin Our standard: natural ventilation and lifting attachments for cranes! WSC-F-E.2-70, with sliding doors and natural ventilation, Article No. C C WSC-F-E.2-110, with sliding doors and natural ventilation, Article No. C C Model WSC-F-E.1-35 WSC-F-E.2-35 WSC-F-E.1-70 WSC-F-E.2-70 WSC-F-E Number of levels External dimensions W x D x H (mm) 3500 x 1450 x x 1450 x x 1530 x x 1530 x x 1540 x 3660 Internal compartment dimensions W x D x H* (mm) 3380 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 1500 Sump capacity (l) x x x 1000 Capacity, KTCs / IBCs Article No., with hinged doors and natural ventilation C C C C Article No., with sliding doors and natural ventilation - - C C C C C C * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, etc.) 171

172 SPECIAL CONTAINERS In addition to our various standard container sizes we are also able to manufacture water protection compartment containers to your own particular wishes and requirements. WATER PROTECTION COMPARTMENT CONTAINERS FOR INDOOR USE WATER PROTECTION COMPARTMENT CONTAINERS WITH SLIDING TARPS Versions with sliding tarps are available for all container models shown on pages Please attend: containers with sliding tarps are not suitable for storing flammable liquids!) Prices on request! 172

173 SPECIAL CONTAINERS WATER PROTECTION COMPARTMENT CONTAINERS WITH PROJECTING ROOF WATER PROTECTION COMPARTMENT CONTAINERS WITH FOLDING DOORS WALK-IN WATER PROTECTION COMPARTMENT CONTAINERS / CUSTOM-MADE 173

174 THERMO CONTAINERS FROST-FREE AND HEATED OUTDOOR STORAGE DESCRIPTION: As a result of the development of the WSC Thermocontainers designed for industrial use it is possible to store thermally sensitive goods safely and independent of the outdoor temperature. HEATING: The WSC Thermocontainers can be laid out to utilise most of the different types of energy available in factories. INSULATION: All walls, roofs and floors are completely insulated with thermally insulating made from fire resistant or incombustible sandwich elements. WSC-T-E.3-70 The practically proven construction of the WSC Thermocontainer provides the optimal solution for each application. Whether for use with fork-lift trucks, for storing small or large containers - each requirement can be met. Approval-No.: Z General Technical Approval DIBt Berlin All water protection compartment containers shown on pages 166 to 171 can be supplied in thermally insulated versions! Model WSC-T-E.1-30 WSC-T-E.2-30 WSC-T-E.3-30 WSC-T-E.1-60 WSC-T-E.2-60 WSC-T-E.3-60 Number of levels External dimensions W x D x H (mm) 3290 x 1440 x x 1440 x x 1440 x x 1550 x x 1550 x x 1550 x 4580 Internal compartment dimensions W x D x H* (mm) 3010 x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x x 1300 x 1250 Sump capacity (l) x x x 650 Capacity, 200 liter drums 10 directly on 20 directly on 30 directly on 20 directly on 40 directly on 60 directly on (examples) grid support or 8 on grid support or 16 on grid support or 24 on grid support or 16 on grid support or 32 on grid support or 48 on chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or chemical pallets or 6 on euro-pallets 12 on euro-pallets 18 on euro-pallets 12 on euro-pallets 24 on euro-pallets 36 on euro-pallets Article No., with hinged doors C T C T C T Article No., with sliding doors C T C T C T * Compartment dimensions and stated capacities without considering electrical installations (ventilation, lighting, heating, cooling etc.) 174

175 THERMO CONTAINERS FROST-FREE AND HEATED OUTDOOR STORAGE GENERAL INFORMATION: Protected against unauthorized access by lockable sliding or hinged doors Sliding or hinged doors always 2-part on longer side as standard Including heating systems bases on hot water, electricity, steam or air circulation possible Can be equipped with air-conditioning All electrical installations in ex-proof version available With ground connection to prevent hazardous electrostatic charges (for Ex-zone 2) WSC-T-E.2-30, Article No. C T WSC-T-E.2-70 Approval-No.: Z General Technical Approval DIBt Berlin External switchbox Convection heating, not ex-proof 175

176 HEATED CHAMBERS HEATED CHAMBERS Special substances used in production often need to be additionally heated, melted or cooled down before they can be used in the production processes. These heated chambers have been specially designed for such applications. Inner temperatures from 0 C to 300 C can be achieved in these systems. Electric Heating / Cooling chamber for 4 x 200 liter drums The large number of different-sized heating chambers available guarantees the accommodation of differing storage amounts and container sizes. The heating and cooling capacities are calculated and realized to suit the requirements of the particular application. Electric heating chamber for 2 x 200 liter drums Transport systems for storing drums can be found on page 216! Electric Heating / Cooling chamber for drum storage 176

177 HEATED CHAMBERS HEATED CHAMBERS Electric heating / cooling chamber for storing drums and small containers Storage temperature 50 C Convection heating Hinged doors Electric heating chamber for storing drums or KTCs / IBCs Approval-No.: Z General Technical Approval DIBt Berlin Electric heating chamber for 12 x 200 liter drums 177

178 PROJECTS WATER PROTECTION COMPARTMENT CONTAINER - PLANT We are pleased to plan your storage system according to the current legal requirements! SAFETY DISTANCE: Please observe a safe distance of at least 10 meters to surrounding buildings to avoid mutual fire exposure. Modular design or customized adjustment; we will find the best and favorably priced solution for you! Our storage system enables you to store various hazardous substances in compliance with the legal requirements! Approval-No.: Z General Technical Approval DIBt Berlin 178

179 PROJECTS THERMO WATER PROTECTION COMPARTMENT CONTAINER - PLANT Operating equipment storage Corridor roof with skylight panel Convection heating Technical forced ventilation Corridor lining with safety floor elements Approval-No.: Z General Technical Approval DIBt Berlin Finished goods storage Storage capacity 100 tons Swiveling fire fighting water retention barrier 179

180 PROJECTS PESTICIDE STORAGE Consisting of safety storehouses with sheet steel roofing Infeed for fire fighting water Retention for fire fighting water Storage quantities of 1 ton to 5 tons are considered to construction law. Storage quantities of 1 ton to 5 tons are considered to BImSchG. Compact storage hall with modular surface protection system Fire fighting water retention with extensible barrier 180

181 CONTENTS FIRE PROTECTION CONTAINER SYSTEMS 5. Fire protection container systems... Walk-in fire protection container (BSC) classic F 90 steel page 183 Walk-in fire protection container (BSC) comfort F 90 steel page 184 Walk-in fire protection container (BSC) premium F 90 steel page 185 Walk-in fire protection container (BSC) superior F 90 steel page 185 Fire protection container for pallets (BSC-FT) with double doors F90 steel page 186 Fire protection container for pallets (BSC-ST) with sliding doors F 90 steel page 187 Fire protection container for pallets (BBL) F 90 concrete page

182 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL Fire chamber test for fire protection container made from steel according to the general technical approval For achieving a general technical approval of DIBt Berlin essential requirement is a successfully passed fire chamber test. For this purpose LaCont fire protection containers have been tested by an authorized testing institute concerning the latest regulations and requirements of DIBt Berlin. FIRE RESISTANCE F 90 in- and outside! Approval-No.: Z General Technical Approval DIBt Berlin Safety without compromises! FIRE RESISTANCE F 90 according to DIN 4102! Our BSCs are in accordance with all legal requirements for the storage of hazardous substances, especially for the storage of flammable liquids. By using fire-resistant versions (90 minutes) BSCs meet all the requirements of DIN 4102 in fire resistance class F 90. Therefore observance of safety distances can be abandoned. Required space is reducing to the storage space of the container. FIELD OF APPLICATION: BSCs are suitable for the storage of: Water-endangering liquids of GHS category 1-4 Flammable liquids of GHS category 1-3 Toxic and very toxic substances Oxidizing substances Waste requiring supervision 182

183 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL WALK-IN BSC CLASSIC Fire protection container with fire resistance >90 minutes With fire chamber test Suitable for indoor and outdoor use Steel sump as per WHG with grid cover Doors close automatically if fire occurs Lifting attachments for cranes (for empty transport only) as standard Outer body painted in RAL 7038, agate-grey Inner body painted in RAL 9001, creme-white Wide range of accessories Approval-No.: Z General Technical Approval DIBt Berlin BSC3-CL, Article No. C B, for storing drums and small containers Model BSC 2-CL BSC 3-CL BSC 4-CL BSC 5-CL BSC 6-CL BSC 7-CL BSC 8-CL External dimensions W x D x H (mm) 2170 x 2350 x x 2350 x x 2350 x x 2350 x x 2350 x x 2350 x x 2350 x 2510 Internal dimensions W x D x H (mm) 1760 x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x 2070 Sump capacity (l) Weight (kg) Art. No., door W x H (mm) 1250 x 2015 (SD)* C B C B C B C B C B C B C B Art. No., door W x H (mm) 1800 x 2015 (DD)** in long side - C B C B C B C B C B C B * SD = single door ** DD = double door FIRE BEHAVIOR - If fire occurs the door(s) close(s) automatically by Thermolock and door closing device - Doors, door gaps, air in- and outlet slots are sealed hermetically - In versions with Thermolock system doors can be left open during the work process BSC4-CL, Art. No. C B, with optional grid shelving for storing small containers Accessories Ex-proof forced ventilation Ex-proof illumination unit, 2 x 36 W Ex-proof heating, 2000 W Ex-proof heating, 3000 W Door hold-open device for single door Door hold-open device for double door Shelf for small containers, basic unit with 4 grid-type storage levels, 600 mm deep, 1060 mm long Shelf for small containers, extension unit with 4 grid-type storage levels, 600 mm deep, 1010 mm long Shelf for small containers, basic unit with 4 grid-type storage levels, 600 mm deep, 1360 mm long Shelf for small containers, extension unit with 4 grid-type storage levels, 600 mm deep, 1310 mm long Drive-on ramp W x L (mm) = 800 x 800 for drum carts Article No. C A C A C A C A C A C A C A C A C A C A C A 183

184 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL WALK-IN BSC COMFORT Execution: Technically as BSC Classic on page 183, but internal height 2520 mm and usable storage depth 2100 mm. Fire protection container with fire resistance >90 minutes Doors close automatically if fire occurs With fire chamber test Lifting attachments for cranes (for empty Suitable for indoor and outdoor use transport only) as standard Steel sumps as per WHG with grid cover Approval-No.: Z General Technical Approval DIBt Berlin Accessories such as forced ventilation, heating, illumination and shelving can be found on page 183! * SD = single door ** DD = double door BSC 4-CO, Article No. C B, with optional grid shelving for storing small containers and optional emergency shower combination (emergency eyewash and bodyshower) Ex-proof heating Additional equipment with sprinkler piping Equipped with shelving for use as small container store Model BSC 2-CO BSC 3-CO BSC 4-CO BSC 5-CO BSC 6-CO BSC 7-CO BSC 8-CO External dimensions W x D x H (mm) 2170 x 2510 x x 2350 x x 2350 x x 2350 x x 2350 x x 2350 x x 2350 x 2960 Internal dimensions W x D x H (mm) 1760 x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x x 2100 x 2520 Sump capacity (l) Weight (kg) Art. No. door W x H (mm) 1250 x 2015 (SD)* C B C B C B C B C B C B C B Art. No. door W x H (mm) 1800 x 2015 (DD)** in long side - C B C B C B C B C B C B 184

185 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL WALK-IN BSC PREMIUM Execution: Technically as BSC Classic on page 183, but internal height 2070 mm and usable storage depth 2700 mm. Approval-No.: Z General Technical Approval DIBt Berlin Accessories such as forced ventilation, heating, illumination and shelving can be found on page 183! BSC 3-PR, Article No. C B, in special color Model BSC 2-PR BSC 3-PR BSC 4-PR BSC 5-PR BSC 6-PR BSC 7-PR BSC 8-PR External dimensions W x D x H (mm) 2170 x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x 2510 Internal dimensions W x D x H (mm) 1760 x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x 2070 Sump capacity (l) Weight (kg) Art. No. door W x H (mm) 1250 x 2015 (SD)* C B C B C B C B C B C B C B Art. No. door W x H (mm) 1800 x 2015 (DD)** in long side C B C B C B C B C B C B C B * SD = single door ** DD = double door WALK-IN BSC SUPERIOR Execution: Technically as BSC Classic on page 183, but with the largest storage volume of all BSCs, internal height 2520 mm and usable storage depth 2700 mm. Approval-No.: Z General Technical Approval * SD = single door ** DD = double door DIBt Berlin Accessories such as forced ventilation, heating, illumination and shelving can be found on page 183! BSC 4-SU, Article No. C B, with single door Model BSC 2-SU BSC 3-SU BSC 4-SU BSC 5-SU BSC 6-SU BSC 7-SU BSC 8-SU External dimensions W x D x H (mm) 2170 x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x x 2950 x 2960 Internal dimensions W x D x H (mm) 1760 x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x x 2700 x 2520 Sump capacity (l) Weight (kg) Art. No. door W x H (mm) 1250 x 2015 (SD)* C B C B C B C B C B C B C B Art. No. door W x H (mm) 1800 x 2015 (DD)** in long side C B C B C B C B C B C B C B 185

186 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL BSC - FT FOR PALLETS WITH DOUBLE DOORS This serie is particularly suitable for storing goods on euro- or chemical pallets. The Thermolock system allows the doors to be left open during the work process. Therefore the BSC can be used by one person without any problems. Execution: Fire protection container with fire resistance >90 minutes With fire chamber test Suitable for indoor and outdoor use Steel sumps as per WHG with grid cover Door hold-open device Doors close automatically if fire occurs Outer body painted in RAL 7038, agate-grey Inner body painted in RAL 9001, creme-white FIRE BEHAVIOR - If fire occurs the door(s) close(s) automatically by Thermolock and door closing device - Doors, door gaps, air in- and outlet slots are sealed hermetically - In versions with Thermolock system doors can be left open during the work process BSC-2.30-FT, Article No. C A Exhaust duct with K90 shut-off device BSC-2.60-FT, Article No. C A Accessories such as forced ventilation, heating, illumination can be found on page 183! Model BSC-2.30-FT BSC-2.60-FT BSC-2.60-KTC-FT External dimensions W x D x H (mm) 3200 x 1750 x x 1750 x x 1750 x 3500 Compartment dimensions W x D x H* (mm) 2740 x 1500 x x 1500 x x 1500 x 1450 Number of storage levels Sump capacity (l) Capacity, 200 liter drums on euro- / chemical pallets 12 / / / 32 Capacity, KTCs/IBCs Weight (kg) Number of double doors Article No. C A C A C A * Compartment dimensions and stated capacities without considering electrical installations (ventilation, heating, etc.) 186

187 FIRE PROTECTION CONTAINER (BSC) F 90 STEEL BSC - ST FOR PALLETS WITH SLIDING DOORS By the use of sliding doors the space required for BSC is reduced to the area of its base, therefore additional expensive storage space is saved. Execution: Technically as BSC-FT on page 186, but equipped with sliding doors FIRE BEHAVIOR - If a fire occurs the door(s) close automatically by the Thermolock and door closing device - Doors, door gaps, air in- and outlet slots are sealed hermetically BSC-2.60-ST, Article No. C A Accessories such as forced ventilation, heating, illumination can be found on page 183! Fire detection system Model BSC-2.60-ST BSC-2.72-ST External dimensions W x D x H (mm) 6550 x 2000 x x 2000 x 3450 Compartment dimensions W x D x H* (mm) 3000 x 1500 x x 1500 x 1500 Number of storage levels 2 2 Sump capacity (l) Capacity, 200 liter drums on euro- / chemical pallets 24 / / 32 Capacity, KTCs/IBCs - 12 Weight (kg) Number of sliding doors 2 2 Article No. C A C A * Compartment dimensions and stated capacities without considering electrical installations (ventilation, heating, etc.) 187

188 FIRE PROTECTION CONTAINER F 90 CONCRETE CONCRETE FIRE PROTECTION STOREHOUSE FOR PALLET STORAGE LACONT concrete fire protection storehouse BBL F 90 complies with all legal requirements for the storage of hazardous substances, in particular with those concerning the storage of flammable liquids. Body made from reinforced concrete quality category C35/45 Double-wing door T90, galvanized and additionally painted in RAL sky blue Exterior surface with spray plaster, interior surface coated Pallet rack for the storage of drums and IBC including sump pallet Optional door hold-open device for ideal loading Technical ventilation and ventilation devices with wipe-proof coating including roof coating Fields of application: BBLs are suitable for the storage of: Water-endangering liquids of GHS category 1-4 Flammable liquids of GHS category 1-3 Toxic and very toxic substances Oxidizing substances Waste requiring supervision Our standard - clear compartment height 1400 mm 1400 mm It meets the requirements of DIN 4102 by means of completely fire resistant design, regardless of which side the fire attacks. In the process only components and building materials will be applied which have available the approval and a certificate of usability mm FIRE RESISTANT F 90 from inside and outside! In compliance with safety regulations, there is no compromise with us! Design and equipment of the LACONT BBL F 90 are in accordance with the standards of BetrSichV, GefStoffV, LöRüRL, TRbF, TRGS, VawS, WHG. Approval-No.: Z General Technical Approval DIBt Berlin 188

189 FIRE PROTECTION CONTAINER F 90 CONCRETE CONCRETE FIRE PROTECTION STOREHOUSE FOR PALLET STORAGE Our standard - clear compartment height 1400 mm Approval-No.: Z General Technical Approval DIBt Berlin Storage capacity 4 KTC / IBC our standard your advantage clear compartment height 1400 mm! BBL-K 4, Article No. C B Door hold-open device with general technical approval Smoke detector for activation of the door hold-open device According to the storage of KTCs / IBCs we would like to recommend grid levels, see accessories! Ex-proof exhaust air installation including flame-resistant ventilation elements Model BBL-P 6 BBL-K 4 External dimensions W x D x H (mm) 3300 x 1980 x x 1980 x 3660 Internal dimensions W x D x H (mm) 2700 x 1350 x x 1350 x 2950 Sump capacity (l) Capacity, 200 liter drums 12 on euro-pallet or 16 on chemical pallet - Capacity, KTCs/IBCs - 4 Article No. C B C B Accessories Article No. Article No. Grid level, load 1000 kg/m 2 / 1500 kg/m 2 C B C B 189

190 GAS CYLINDER STORAGE REGULATIONS PRACTICAL INFORMATION 9 What should be considered when storing pressurized gas cylinders! Pressurized gas cylinders belong to the things in stock which are subject to strict restrictions due to their tremendous hazard potential. The most important regulations are regulated by TRG 280 (Technical regulations pressurized gases). We have already compiled some important extracts from the TRG 280 below. 5.1 In general According to the storage of pressurized gas cylinders it must be distinguished between storing indoors and storing outdoors. Concerning storing outdoors stores are opened up at least to two sides as well as opened up just to one side if depth (measured from the open side) is not greater than the height of the open side. One side of the stockroom would also considered open if it consists of fence wire or anything else As far as the number of charged pressurized gas cylinders is restricted to the following regulations, it is allowed to have available emptied unpurified pressurized gas cylinders in doubled numbers Pressurized gas cylinders may not be stored in stockrooms below ground level, in stairwell and landing, corridors, floor hallways, narrow yards, thoroughfares and passage routes or in its immediate vicinity, on stairs of outdoor enclosures, on specially marked escape routes, in carhouses and in working rooms. Stockrooms do not belong to working rooms, even if personnel is employed there Pressurized gas cylinders for compressed air or oxygen may be stored in stockrooms below ground level departing from pos Decanting of pressurized gases as well as maintenance of pressurized gas cylinders are not allowed in stockrooms Storage facilities may not be accessed by unauthorized personnel. Please refer to this prohibition by using signboards Please observe that there are not any sources of ignition in a save area of pressurized gas cylinders where flammable gases get stored. These sources of ignition might get inflamed by any gases Please point these save areas and respective hazard out (danger of explosion and danger of poisoning) by using warning labels. 5.2 Stores indoors Rooms must be separated from adjoining rooms by at least fire-resisting components for storing pressurized gas cylinders. Fire-proof components would be required, if there is any danger of explosion or fire hazard in adjoining rooms not intended for the storage of pressurized gas cylinders External walls of stockrooms must be at least fire-resisting Stockrooms must be sufficiently aired and vented. The natural ventilation would be sufficient, if there are any ventilation slots leading directly outdoors with a total cross section of at least 1/100 according to the floor space of the stockroom. Concerning the collocation of the ventilation slots please observe density of the gases. Pos will remain unaffected. Regarding sentence 2 (total cross section) please refer to the actual storage area for pressurized gas cylinders based on the required size of ventilation slots as far as ventilation slots are situated directly at the storage area Stockrooms for pressurized gas cylinders with flammable or very toxic gases adjoining to a public transport route are to be equipped directly on the transport route adjoining side with a wall without doors and up to a height of 2 m without openable windows or any other openings. This is not for doors which are carried out with selfclosing and at least fire-resisting doors Stockrooms in which pressurized gas cylinders for flammable or very toxic gases get stored must be vacated quickly. Storing indoors 5.3 Stores outdoors According to stores outdoors installation surface must be so designed that pressurized gas cylinders are safe The save area may not extend beyond adjoining land or public thoroughfare. The save area may be constricted on not exceeding two sides by at least 2 m high non-openable protective walls from incombustible building materials. Here, it could be as well the wall of a building on one side which must be closed in its entirety at the save area According to the storage of filled pressurized gas cylinders outdoors please observe safe distance to neighboring facilities from which a hazard might get started. Safety distance is at least 5 m around the pressurized gas cylinders. This could be replaced by an at least 2 m high protective wall from incombustible building materials. Should you require any further information on safe areas or explosion protection zones according to the TRG 280, please contact us. We are pleased to assist you! Storing outdoors 190

191 CONTENTS GAS CYLINDER STORAGE SYSTEMS 6. Gas cylinder storage systems outdoors... Our gas cylinder storage systems are available in our standard color RAL sky blue (if not specified separately) Safety cabinets for small gas cylinders page 192 TRG cells page 193 Cages and containers for gas cylinders page Storehouses for gas cylinders page 196 Storage boxes for gas cylinders page 197 Storage system for gas cylinders F 90 steel page 198 Gas cylinder storage system concrete page 199 Gas cylinder handling page

192 SAFETY CABINETS FOR SMALL GAS CYLINDERS For storing propane gas cylinders outdoors Technical description: Constructed completely from galvanized sheet steel Closed back wall and roof Side walls and door(s) with pattern of holes for stipulated ventilation as per TRG 280 Stable floor and intermediate shelf as storage areas Door(s) with cylinder lock to prevent unauthorized access Marked with warning symbol W19 Dismounted delivery for self-assembly according to supplied instructions K-GFS 10, Art. No. C B K-GFS 20, Article No. C B K-GFS 20, Article No. C B K-GFS 20, Article No. C B Model K-GFS 10 K-GFS 20 External dimensions W x D x H (mm) 850 x 700 x x 700 x 1450 Capacity, 11 kg gas bottles Door(s) 1, hinged right double door Weight (kg) Article No., galvanized C B C B 192

193 TRG CELLS TRG 700 / TRG 1050 / TRG 1400 For the storage of pressurized gas cylinders as per TRG 280 indoors and outdoors Outer body made from galvanized sheet steel, powder-coated in RAL light grey High corrosion protection Can also be used indoors depending on defined fire load - see TRG 280, BGR 120 and TRGS 526 Storage and operation even without compliance of protection zones as per TRG 280 Roof inclined towards front Stainless steel floor to prevent impact damage Stainless steel base plate - Niro Rhombus Ventilation slots in door(s) and below projecting roof Cabinet roof prepared for on-site technical forced ventilation system DN 75 Door(s) with cylinder lock Marked with warning symbol W19 Fully equipped TRG cells: 2 x vertical c-rails on back wall 2 x height- adjustable, horizontal c-rails for mounting fittings 1 x cylinder holder (tension belt) for 50 liters gas cylinders Outlets in roof for pipe penetration (ø 25 mm) including filler plug TRG 1400, Article No. C B Further information and accessory can be found on page 147! TRG 700, Article No. C B TRG 1050, Article No. C B TRG 700, Article No. C B Model TRG 700 TRG 1050 TRG 1400 External dimensions W x D x H (mm) 700 x 400 x x 400 x x 400 x 2150 Door/s 1, hinged right double door double door Pipe penetrations Capacity 50 liter gas cylinders up to 2 up to 3 up to 4 Weight (kg) Outer body: RAL light grey Article No., door/s sheet steel RAL light grey C B C B C B Article No., door/s sheet steel RAL light grey with plexiglass segment C B C B C B 193

194 CAGES FOR GAS CYLINDER CABINETS Gas cylinders are included in the group of goods that are subject to strict storage regulations because of their great potential risks. Delivered fully assembled! Therefore gas cylinders must not be stored in basements, garages or work spaces. This means that gas cylinder cabinets and containers are intended for outdoor use and comply with the requirements of TRG 280 for an outdoor storage facility. Welded profile steel construction Side walls and roof made from galvanized and painted sheet steel Back wall made from galvanized and coated trapezoidal sheet Grid-type door(s) Cantilever arm compartment divider with safety chains (folding) Lifting attachment for cranes as standard Single or double door depending on version Complies with TRG 280 (Technical Rules for Pressurized Gases) FCG 16.21, with BG**, Article No. C B, with optional drive-on ramp Delivered fully assembled! Delivered fully assembled! FCG 6.08, without BG*, Article No. C B FCG 16.21, without BG*, Article No. C B Gas cylinder safety cages for individual cylinders Model FCG 6.08 FCG 8.11 FCG FCG FCG FCG External dimensions W x D x H (mm) 860 x 1050 x x 1050 x x 1250 x x 1050 x x 1250 x x 1480 x 2055 Capacity, gas cylinders Ø Door version 1 hinged right 1 hinged right 1 hinged right double door double door double door Weight (kg) Article No., without BG*, painted C B C B C B C B C B C B Article No., with BG**, painted C B C B C B C B C B C B Accessory for FCG with base group Galvanized drive-on ramp, W x D x H (mm) = 750 x 740 x 130 Article No. C B * = without base group ** = with base group 194

195 CAGES / CONTAINERS FOR GAS CYLINDERS Delivered fully assembled! Technical description as gas cylinder cages on page 194 Very stable execution complies with TRG 280 Complies with TRG 280 (Technical Rules for Pressurized Gases) Accessory for FCG with base group Galvanized drive-on ramp, W x D x H (mm) = 750 x 740 x 130 Article No. C B FCG 30.13, with base group, Art. No. C B, with optional drive-on ramp Gas cylinder cages for cylinder pallets and individual cylinders Model FCG FCG External dimensions W x D x H (mm) 1400 x 1400 x x 1400 x 2055 Capacity, gas cylinder pallets 1 2 Capacity, gas cylinders Ø Door version double door double door Weight (kg) Article No., without BG*, painted C B C B Article No., with BG**, painted C B C B Delivered fully assembled! FCG-E.6.96, with base group, Article No. C B, with optional drive-on ramp Gas cylinder container for cylinder pallets and individual cylinders Model FCG-E.3.48 FCG-E.6.96 External dimensions W x D x H (mm) 3120 x 1440 x x 1550 x 2400 Delivered fully assembled! Capacity, gas cylinder pallets 2 and 4 gas cylinder 4 and 8 gas cylinder Capacity, gas cylinders Ø Door version double door sliding door, two-piece Weight (kg) Article No., without BG*, painted C B C B Article No., with BG**, painted C B C B * = without base group ** = with base group Accessory for FCG with base group Galvanized drive-on ramp, W x D x H (mm) = 880 x 845 x 205 Article No. C B FCG-E.3.48, with base group, Article No. C B 195

196 GAS CYLINDER STOREHOUSES These gas cylinder storehouses have been developed on the basis of our widely used and practically proven safety storehouses. Their closed construction means that their contents cannot be seen and provides ideal protection against the weather and theft. Outdoor storage of gas cylinders and gas cylinder pallets in accordance with TRG 280 Stable construction from special profiled galvanized sheet steel Galvanized double doors with cylinder lock High-loading galvanized grid-type floor; also serves as ventilation underneath Flexible holders and tension belts secure individual bottles against falling over Delivered fully assembled GLH 2 x 1, Article No. B C, with optional drive-on ramp Shelving systems for small cylinders and pressurized gas cylinders available on request! GLH 3 x 2, version with special doors and optional drive-on ramp Model GLH 2 x 1 GLH 3 x 2 GLH 4 x 2 External dimensions W x D x H (mm) 2100 x 1100 x x 2100 x x 2100 x 2100 Internal dimensions W x D x H (mm) 1980 x 980 x x 1980 x x 1980 x 1930 Capacity, 50 liter cylinders Door arrangement double doors / 2 m side double doors / 3 m side 2 double doors / 4 m side Article No., galvanized B C B C B C Article No., galvanized + painted B C B C B C Accessory Galvanized drive-on ramp W x D (mm) = 1200 x 1000 Article No. B C 196

197 STORAGE BOXES FOR GAS CYLINDERS CONFORM WITH TRG 280 For the correct and secure storage of liquid gas cylinders or other highly flammable substances. The gas cylinders cage is a favorably priced storage facility for different sizes of gas cylinder. Stable frame construction with fire galvanized grids Roof made from galvanized corrugated sheet Hinged door with profile cylinder lock Prepared for ground attachment Complies with TRG 280 Wide range of accessories Supplied dismantled LB-3115, Article No. C C OPTIONS: Height-adjustable shelf for additional storage surface Double door 2 m wide Sliding door 1 m wide Also available without roof Other sizes available on request! LB-3115, Article No. C C Defined place for all types of gas cylinders Weather-protected Single door, width 1000 mm Galvanized for high corrosion protection Stored cylinders protected against unauthorized access Model LB-3115 LB-3121 LB-4421 LB-6121 Width (mm) Depth (mm) Height (mm) Article No., galvanized C C C C C C C C 197

198 GAS CYLINDER STORAGE SYSTEM STEEL ROOF, SIDEWALLS AND BACK WALLS IN F90 VERSION For regular storage outdoors of pressurized gas cylinders in accordance with technical regulations for pressurized gases, TRGS 280 Roof and walls in fire-resistant version as per DIN 4102 Cantilever arm compartment divider with safety chains (fold out) Mounted delivery Lockable grilled door With hinged or double-hinged door depending on version Completely mounted delivery! Installation directly next to building without safety distance! Completely mounted delivery! GFL-F , Art. No. C A, with optional partition wall Completely mounted delivery! GFL-F , Article No. C A GFL-F90 in special design Model GFL-F GFL-F GFL-F GFL-F GFL-F GFL-F External dimensions W x D x H (mm) 1080 x 1250 x x 1250 x x 1400 x x 1250 x x 1400 x x 1600 x 2290 Internal dimensions W x D x H (mm) 800 x 920 x x 920 x x 1080 x x 920 x x 1080 x x 1230 x 2000 Door version Hinged door right Hinged door right Hinged door right Double-hinged door Double-hinged door Double-hinged door Capacity, gas cylinders ø 220 mm Article No., painted without base group C A C A C A C A C A C A Article No., painted with base group C A C A C A C A C A C A Accessories Ramp, galvanized Partition wall depth 920 mm: GFL-F /-8.11/ Partition wall depth 1080 mm: GFL-F / Partition wall depth 1230 mm: GFL-F Article No. C A C A C A C A 198

199 GAS CYLINDER STORAGE SYSTEM CONCRETE The storage of pressurized gas cylinders is regulated by Technical Regulations for Pressurized Gases (TRGS 280). That is to say: Gas cylinders have to be placed on even ground and be secured against tilting. E.g. stored in gas cylinder pallets, positioned with security chain. Whole construction made from reinforced concrete strength class C 30/37 Walls F30 fire resistant according to DIN 4102 Integrated weather-protecting canopy roof Exterior surface with spray plaster, interior surface painted Including roof coating and drainage Lockable, grid-type double doors galvanized Retaining bracket with safety chain as additional separation Turn-key mounted delivery Flexible storing of single gas cylinders and/or gas cylinder pallets by movable cantilevers is possible. GFL-B-50.28, Article No. C A Gas cylinder pallets can be found on page 201! GFL-B-50.28, Article No. C A, with optional drive-on ramp Model GFL-B External dimensions W x D x H (mm) 2980 x 1700 x 2560 Internal dimensions W x D x H (mm) 2820 x 1600 x 2172 Capacity 50 liter gas cylinders Gas cylinder pallet Article No. 50 cylinders or 1 pallet and 20 cylinders or 2 pallets C A Accessory Drive-on ramp galvanized W x D (mm) = 950 x 1150 Article No. C A 199

200 GAS CYLINDER HANDLING GAS CYLINDER CARTS Welded steel-tube construction, powder-coated in RAL 5010 Up to two 10 and 20 liter gas cylinders (cylinders Ø mm) Wheels mounted on roller bearings Optional equipment with tool box Welded steel-tube construction, powder-coated in RAL 5010 For 40 and 50 liter gas cylinders (cylinders Ø mm) Wheels mounted on roller bearings GFR20-L, Article No. B B GFR50-V, Article No. B B Model GFR20-V GFR20-L Wheels solid rubber tire pneumatic tires Wheel Ø (mm) 250 x x 85 Dimensions W x H (mm) 730 x x 1100 Article No. B B B B Model GFR50-V GFR50-L Wheels solid rubber tire pneumatic tires Wheel Ø (mm) 200 x x 50 Dimensions W x H (mm) 460 x x 1200 Article No. B B B B WELDER CARTS Welded steel-tube construction powder-coated in RAL 5010 Up to two 40 and 50 liter gas cylinders (cylinders Ø mm) Wheels mounted on roller bearings Handholds with hand protecting grip Optional equipment with tool box GSK50-VO/GSK50-LO without support wheel GSK50-VS/GSK50-LS with support wheel GSK50-VO, Article No. B B, with optional tool box GSK50-LS, Article No. B B Model GSK50-VO GSK50-LO GSK50-VS GSK50-LS Wheels solid rubber tire pneumatic tires solid rubber tire pneumatic tires Wheel Ø (mm) 400 x x x x 100 Dimensions W x H (mm) 840 x x x x 1280 Article No. B B B B B B B B TOOL BOX FOR WELDER CARTS GAS CYLINDER STANDS Tool box with cover Lockable with padlock (not included) Mountable on cart WK, Art. No. B B Model WK External dimensions W x D x H (mm) 460 x 205 x 153 Welded steel-tube construction, powder-coated in RAL 5010 For every 2 pieces 40 or 50 liter gas cylinders (Ø mm) Drillings for wall mounting Stands can be screwed together with each other as well Dimensions W x D x H (mm) = 560 x 340 x 1100 Article No. B B Article No. B B 200

201 GAS CYLINDER HANDLING GAS CYLINDER PALLET GFP-1211 For the storage and transport of propane gas cylinders Solid frame construction, fire galvanized Accessible by foot construction with fork-lift truck or hand pallet truck Capacity: 12 pieces gas cylinders, 11 kg or 20 pieces gas cylinders 5 kg Dimensions: W x D x H (mm) = 1230 x 1015 x 975 Weight: 61 kg GAS CYLINDER PALLET GFP-2411 For the storage and transport of propane gas cylinders Solid frame construction, fire galvanized Grid-sidewalls Roof from galvanized trapezoidal sheet Grilled double-hinged door lockable with padlock 2 storage levels Accessible by foot construction with fork-lift truck or hand pallet truck Capacity: 24 pieces gas cylinders 11 kg or 40 pieces gas cylinders 5 kg Dimensions: W x D x H (mm) = 1245 x 1015 x 1760 Weight: 120 kg Article No. B A Article No. B A GAS CYLINDER PALLET GFP-1233 For the storage and transport of 33 kg gas cylinders Solid frame construction, fire galvanized Accessible by foot construction with fork-lift truck or hand pallet truck Capacity: 12 pieces gas cylinders 33 kg Dimensions W x D x H (mm) = 1400 x 1060 x 1710 Weight: 110 kg GAS CYLINDER PALLET GFP-1250 For the storage and transport of 50 kg gas cylinders Solid frame construction, fire galvanized Accessible by foot construction with fork-lift truck or hand pallet truck Integrated hinged ramp Capacity: 12 pieces gas cylinders 50 kg Dimensions: W x D x H (mm) = 1015 x 810 x 1150 Weight: 90 kg Tension belt for all types, available as accessory, length 3 m, Article No. Z A Article No. B A Article No. B A 201

202 TRGS OVERVIEWS OF CLUSTERING PRACTICAL INFORMATION 10 The question which hazardous substances are allowed to be stored together in stores as well as bearing sections, is very important for the design of storage places referring to hazardous substances. It is specified in numbers of regulations, laws and technical rules. In this connection the new TRGS has embraced this VCI - draft (association of chemical industry) and regulates clustering of hazardous substances regarding the different categories of hazardous substances. As you can see below you will be able to define quickly and clearly the permissibility of clustering concerning the different substances by means of a simplified list. Please have a look at the TRGS 510 for further information on constrained clustering. Overviews of clustering dependent on storage class Storage class B 8A D 6.1C 6.1B 6.1A C 5.1B 5.1A B 4.1A 3 2B 2A 1 Explosive substances Gases Aerosols Flammable liquid substances Other explosive substances Flammable solid or desensitized substances Self-igniting substances Substances which form flammable gases in contact with water Intensive oxidizing substances Oxidizing substances Ammonium nitrate and ammonium nitrate containing substances Organic peroxides and self-reactive substances Combustible acute toxic substances Incombustible acute toxic substances Combustible toxic or chronic active substances Incombustible toxic or chronic active substances Infectious substances Radioactive substances Combustible caustic substances Incombustible caustic substances Combustible liquids unless LGK 3 Combustible solids Incombustible liquids Incombustible solids Other combustible and incombustible substances 1 2A 2B 3 4.1A 4.1B A 5.1B 5.1C A 6.1B 6.1C 6.1D A 8B Separate storage required Clustering permitted Constrained clustering permitted By assigning substances concerned to so called storage classes (LGK) the basis for this draft is formed apparent from respective safety data sheet. Each storage class (LGK) provides you with information on clustering with every of the remaining LGK if basically permitted and if separate storage is required or a constraint of clustering has to be observed (for instance separate storage required when stored in the same bearing section) according to this overview of clustering! 202

203 CONTENTS SAFETY TECHNOLOGY AND CONTAINER SYSTEMS 7. Safety technology, container and handling systems... Stopcocks and accessories page 204 Safety containers page Parts cleaning page 211 Drum handling page Spill response systems page Emergency showers page

204 STOPCOCKS AND ACCESSORIES Liquids contained in large containers, such as 60 and 200 liter drums, usually have to be filled off into smaller containers before use. We can supply stopcocks made from various materials for use with different liquids. ZINC STOPCOCKS ALUMINIUM STOPCOCKS Suitable for oils, diesel fuel and heating oil Suitable for oils, diesel fuel and heating oil Self-closing Lockable Thread connection 3/4 Economical version Article No. B A Self-closing Thread connection 2 With seal Economical version Large outlet Article No. B A Rigid model Thread connection 3/4 Self-closing With integrated flame barrier Made from zinc injection molding Plastic seal STOPCOCK Lockable when closed Art. No. B A SAFETY STOPCOCK STAINLESS STEEL SAFETY STOPCOCK Suitable for extremely flammable and highly flammable liquids, such as petrol, washing benzene, etc. Rigid model Thread connection 3/4 Self-closing With integrated flame barrier Made from brass/bronze PTFE-seal Lockable when closed With suspension device for filling Art. No. B A Suitable for extremely flammable liquids, highly flammable liquids and aggressive media Decanting position freely selectable Thread connection 3/4 Self-closing With integrated flame barrier Made from stainless steel PTFE-seal Lockable when closed With suspension device for filling Art. No. B A DRUM WRENCH Easily opens common drum closures Bronze alloy, spark inhibiting For safe and efficient use Suitable for all bunghole drums Length approx. 300 mm Article No. B A DRUM KEY DRUM VALVES High-grade drum key for common drums Solid construction - galvanized For easy and safe opening of bunghole drums Length approx. 360 mm For pressure compensation and explosion prevention if fire occours Automatic pressure compensation Manual pressure compensation possible while filling-off Brass flame barrier and body Thread connection 2 for bunghole drums Article No. B A Article No. B A 204

205 CONTAINER TECHNOLOGY SAFETY CONTAINERS Spout with stainless steel flame barrier Self-closing lid with easy handle operation Galvanized sheet steel models with TÜV/GS approval Made from sheet steel For flammable liquids in GHS categories 1-3, red Made from Polyethylen (PE) For corrosive solvents, acids and alkalis, red Operating element and flame barrier made from stainless steel Model Sheet steel Polyethylen Volume (l) Height (mm) Width x Depth (mm) ø 120 ø 240 ø 240 ø x 194 Article No. L D L D L D L D L D Polyethylen funnel, Article No. L D Accessory Polyethylen funnel for safety containers with 8 and 19 liters Simply fixed Funnel tiltable - filling the container is possible without removing the funnel SAFETY STEEL CONTAINERS With flexible metal hose Flexible metal hose for uniformly and easy filling Dispensing lever for simple and accurate dispensing Stainless steel flame barrier, self-closing lid, automatic air vent Wide-opening lid for easy filling Ergonomic handles For flammable liquids in GHS categories 1-3, red With TÜV/GS approval Volume (l) Height x ø (mm) 270 x x x 300 Hose dimensions ø x length (mm) 16 x x x 230 Article No. L D L D L D SAFETY FILLING CONTAINER WITH STOPCOCK Simple and safe decanting into smaller containers Self-closing stopcock 3/4 made from brass Self-closing lid with stainless steel flame barrier Made from sheet steel For flammable liquids in GHS categories 1-3, red Made from Polyethylen (PE) For corrosive solvents, acids and alkalis, red Model Sheet steel Polyethylen Volume (l) Height x ø (mm) 310 x x x 290 Article No. L D L D L D SAFETY COLLECTION CONTAINERS Made from highly resistant Polyethylen (PE) Self-closing lid, flame barrier, operating element made from stainless steel, ground connection between liquid and fastener For the safe collection of remains and liquid wastes Explosion-proof large filling opening, approx. ø 100 mm Volume (l) 8 19 Height x ø (mm) 375 x x 305 Article No. L D L D 205

206 CONTAINER TECHNOLOGY WASH AND DIP TANK For safe cleaning of small parts with solvents and dipping of workpieces Automatic thermal closing mechanism if fire occurs Model Sheet steel, painted red Volume (l) Height x ø (mm) 140 x x x 400 Article No. L D L D L D Accessory Article No. Article No. Article No. Parts basket - L D L D MOISTENING CANS MOISTENING CANS STAINLESS STEEL For safe and economical For safe and economical moistening of cleaning rags moistening of cleaning rags and wipes with solvents and wipes with solvents With flame barrier Made from stainless steel Pumping station directs the (can body) liquid to the soaking tray Flame barrier made from stainless Soaking tray ø 130 mm steel in the soaking tray With TÜV/GS approval Teflon seal Model Sheet steel, painted red Polyethylen Volume (l) Height x ø (mm) 140 x x x x 140 Volume (l) 1 2 Height x ø (mm) 265 x x 130 Article No. L C L C Article No. L D L D L D L D SAFETY BENCH CANS For dosed moistening of cleaning rags and parts cleaning Avoidance of vapors by flame barrier Cushioned flame barrier Model Sheet steel, painted red Volume (l) Height x ø (mm) 80 x x x 290 Article No. L D L D L D SAFETY WASTE CANS Self closing Fire protective system against self-ignition With TÜV/GS approval Versions: Lid opening by manual operation or Ergonomic pedal (foot operation) Model Made from sheet steel For cleaning rags soaked with flammable and water-endangering liquids (solvents, thinners, paints, adhesives) Galvanized, round, robust and stable Handle for easy transportation Sheet steel, painted red Volume (l) With foot operation; Height x ø (mm) 400 x x x x 470 Article No. L D L D L D L D With manual operation; Height x ø (mm) x x 470 Article No. - L D - L D 206

207 CONTAINER TECHNOLOGY SAFETY CANS / SAFETY MOISTENING CANS (STAINLESS STEEL) For the safe storage, distribution and internal transport of flammable liquids Industrial version made from stainless steel Lab version made from stainless steel polished Teflon seal Metal flame barrier made from stainless steel in filling/pouring opening Ergonomic handle Ground connection Marked according to GefStoffV For internal use Fine dosage model: With self-closing vented (vacuum compensation) fine dosing device for easier liquid handling Screw cap model: With screw cap including overpressure valve (automatic overpressure/ vacuum compensation from 0.3 bar) Impregnating dish accessories: Used for 1 and 2 liter cans For further technical details and description see page stainless steel moistening cans Fine dosage model Capacity Height ø Article No. Article No. (l) (mm) (mm) Industry version Lab version 1, L B L B 2, L B L B 5, L B L B Screw cap model Capacity Height ø Article No. Article No. (l) (mm) (mm) Industry version Lab version 1, L B L B 2, L B L B 5, L B L B Accessories / Spare parts Fine dosing device 1 1/4 with built-in vent Screw cap 1 1/4 with overpressure valve Insert funnel, stainless steel, for 1/2/5 liter cans Impregnating dish 1 1/4 for 1 liter can Impregnating dish 1 1/4 for 2 liter can Article No. L B L B L B L B L B SAFETY CANISTERS (STAINLESS STEEL) For the safe storage, distribution and internal transport of flammable liquids Space-saving canister design Made from stainless steel Teflon seal Metal flame barrier made from stainless steel in filling/pouring opening Ergonomic handle Ground connection Marked according to GefStoffV For internal use Fine dosage model: With self-closing vented (vacuum compensation) fine dosing device for easier liquid handling Fine dosage model Capacity Height Width Depth Article No. (l) (mm) (mm) (mm) L B L B 20* L B Screw cap model Capacity Height Width Depth Article No. (l) (mm) (mm) (mm) L B L B 20* L B * with separate venting screw on container Screw cap model: With screw cap including overpressure valve (automatic overpressure/vacuum compensation from 0.3 bar) Model L B with separate venting screw on container Accessories / Spare parts Fine dosing device 1 1/2 with built-in vent Fine dosing device 1 1/2 without vent (for L B with venting screw on container) Screw cap 1 1/2 with overpressure valve Insert funnel, stainless steel, for 5/10/20 liter canisters Article No. L B L B L B L B 207

208 CONTAINER TECHNOLOGY SAFETY DISTRIBUTION CANS (STAINLESS STEEL) For the safe storage, distribution and internal transport of flammable liquids Made from stainless steel / Teflon seal Metal flame barrier made from stainless steel in filling/pouring opening Ground connection Version I without filling level indicator Version II with filling level indicator With optional funnel Fine dosage model: Simple pouring by tilting the container Stopcock 3/4 model with and without filling level indicator: For simple filling off, even with standing container With screw cap and manual venting by tipping lever Standard with screw cap and overpressure valve Capacity Height ø Article No. Article No. (l) (mm) (mm) Version I Version II L B L B L B - Accessories / Spare parts Fine dosage device 1 1/2 for cans with manual venting Stopcock 3/4 Screw cap with manual venting (1 1/2 for 10/25 liter cans) Screw cap with overpressure valve (1 1/2 for 10/25 liter cans) Screw cap with manual venting (2 for 50 liter cans) Screw cap with overpressure valve (2 for 50 liter cans) Insert funnel, stainless steel, for 10/25/50 liter cans Article No. L B L B L B L B L B L B L B Fine dosage model Capacity Height ø Article No. Article No. (l) (mm) (mm) Version I Version II L B L B Stopcock 3/4 model Capacity Height ø Article No. Article No. (l) (mm) (mm) Version I Version II L B L B L B L B L B L B SAFETY COLLECTION CONTAINERS (STAINLESS STEEL) For the safe collection and disposal of flammable liquids Made from stainless steel Teflon seal Optional metal flame barrier made from stainless steel in filling/pouring opening: Flame barrier adapter L B With central 2 sleeve and Tri-Sure stopper Version I without filling level indicator Version II with filling level indicator Accessories: Spout for safe pouring into disposal container Flame barrier adapter for permanent safety Safety funnel and flat safety funnel for easy and convenient filling with liquid residues Capacity Height ø Article No. Article No. (l) (mm) (mm) Version I Version II L B L B Accessories / Spare parts Safety funnel with built-in flame barrier Flat safety funnel with built-in flame barrier Spout 2 (length 160 mm / ø 40 mm) Flame barrier adapter* Article No. L B L B L B L B * for permanently high safety, even when pouring out 208

209 CONTAINER TECHNOLOGY For safely filling off flammable liquids SAFETY FILLING-OFF CANISTERS (STAINLESS STEEL) Space-saving canister design Made from stainless steel / Teflon seal Metal flame barrier Ergonomic handle Ground connection Canister with safety stopcock and separate venting screw Marked according to GefStoffV Capacity Height Width Depth Article No. (l) (mm) (mm) (mm) L B L B L C Accessories / Spare parts Stopcock 1 1/2 Screw cap 1 1/2 with overpressure valve Insert funnel, stainless steel, for 5/10/20 liter canisters Article No. L B L B L B For transporting hazardous goods, e.g. on public roads SAFETY TRANSPORT CONTAINERS (STAINLESS STEEL) Made from stainless steel / Metal flame barrier in filling/pouring opening Ground connection With screw cap for transport on public roads ADR/RID/IMDG approval (UN number) Separate venting screw (L B / L B) Safety cans and canisters with a fine dosing device are also suitable for internal distribution as well as filling off and transferring liquids. In addition to a fine dosing device, a filling support is available for safety containers 25 liter for horizontal storage and filling off. Safety transport cans Capacity Height ø Article No. (l) (mm) (mm) L B L B L B Safety transport canisters Capacity Height Width Depth Article No. (l) (mm) (mm) (mm) L B L B L B Safety transport containers Capacity Height ø Article No. (l) (mm) (mm) L B Accessories / Spare parts Screw cap 1 1/2 (GGVSEB) Stopcock 1 1/2 without venting for containers with separate venting screw Filling off support for 25 liter containers (2 pieces) Article No. L B L B L B 209

210 CONTAINER TECHNOLOGY SAFETY COLLECTION CONTAINER FOR FLUORESCENT TUBES Made from 3 mm sheet steel With feet for 100 mm ground clearance Safe transport by built-in fork-lift supports 4 lifting attachments for cranes as standard Model LSB-T with lockable door at front Model LSB-DT with lockable cover and door at front Capacity fluorescent tubes Corrosion protection with primer and painting or fire-galvanizing LSB-T, Article No. L A Model LSB-T LSB-T LSB-DT LSB-DT External dimensions W x D x H (mm) 1700 x 770 x x 770 x x 770 x x 770 x 1030 Article No., painted L A L A L A L A Article No., fire-galvanized L A L A L A L A SAFETY COLLECTION CONTAINER FOR USED BATTERIES Made from 3 mm sheet steel Acid-resistant GFK inner coating Safe transport by built-in fork-lift supports 4 lifting attachments for cranes as standard With feet for 100 mm ground clearance Lockable hinged cover with locking device and continuous foam rubber seal 3-fold stackable Corrosion protection with primer and painting or fire-galvanizing Model ABT-GFK External dimensions W x D x H (mm) 1200 x 855 x 830 Weight (kg) 140 Article No., painted Article No., fire-galvanized L B L B ABT-GFK, Article No. L B SAFTEY TRANSPORT CONTAINER MB FOR HAZARDOUS GOODS For the transport of hazardous goods, e.g. paints, spray cans, etc. Container and push-over lid made of purple-red PE Closed by permanently mounted metal clamps 5 different sizes available Tested by the German Federal Materials Research and Testing Institute (BAM) Approved as outer packaging for hazardous goods of package groups II and III Model MB 40/18 MB 40/27 MB 60/38 MB 60/58 MB 60/74 External dimensions top L x W (mm) 400 x x x x x 400 Complies with ADR, RID, IMDG, road/rail/sea transport and air freight regulations! External dimensions base L x W (mm) 320 x x x x x 335 External height (with lid) (mm) Capacity (l) Max. permitted load (kg) Article No. L A L A L A L A L A 210

211 PARTS CLEANING PARTS CLEANING SYSTEM Secure and stable construction made from sheet steel 3 year factory warranty on the patented pump system when using the special cleaner EL / Extra, RF and Purgasol Cleaning brush with hose connection Highly economical due to circulation principle TÜV and BG tested devices With optional sump tray for model M, K and BK 50; type-tested construction made from sheet steel Refitting to a 50 liter drum for device type K possible - add-on kit on request F2, Article No. B A BK 50, Article No. B A K, Article No. B A Model M K BK 50 F2 Work surface W x D (mm) 1145 x x x x 500 Working height (mm) For drum size (l) Load capacity (kg) Article No. B A B A B A B A Accessory sump for model M for model K for model BK 50 External dimensions W x D x H (mm) 930 x 660 x x 750 x x 500 x 160 Sump capacity (l) Article No. B B B B B B M, Article No. B A SPECIAL CLEANSING AGENT Is subjected to regular, strict controls Hydrocarbon-based Dearomatized, self-clarifying cleaning liquid Intensive cleaning effect Hazard class A III Type EL / Extra EL / Extra RF RF Purgasol Purgasol Content (l) Article No. B A B A B A B A B B B B Special cleansing agent EL / Extra: Metal degreasing, metal cleaning and surface treatment Skin-friendly and odorless Attacks dirt by infiltration Evaporates fast and without residue Food approval, meets the requirements of FDA approval Special cleansing agent RF: For oil and fatty soils Skin-friendly and odorless Longer application time by slow evaporation Lipid regulating, with temporary corrosion protection In cases of heavy soiling we recommend special cleansing agent Purgasol Special cleansing agent RF 50, Art. No. B A Disposal: On delivery of a new drum, the used special cleansing agent is taken back for free! 211

212 DRUM HANDLING DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base, rim height 80 mm Model FAR-2: open version, rim height 30 mm FAR-2, Article No. B A FAR-1, Article No. B A DRUM CART FOR 200 LITER STEEL DRUMS Suitable for steel drums up to 200 liter capacity Stable construction made from powder-coated steel tubes in RAL sky blue Max. load 400 kg With or without support wheel Pneumatic or solid rubber tyres FK , Article No. B A FK , Article No. B A Model FK FK FK FK Wheels solid rubber pneumatic solid rubber pneumatic Equipment without support wheel without support wheel with support wheel with support wheel Wheel ø (mm) Dimensions W x H (mm) 660 x x x x 1600 Article No. B A B A B A B A DRUM CART FOR 200 LITER STEEL- AND PLASTIC DRUMS Suitable for plastic and steel drums up to 200 liter capacity Stable construction made from powder-coated steel tubes in RAL sky blue with filling support frame Max. load 400 kg Model FK with pneumatics, wheels ø 400 mm Model FK V with solid rubber wheels, wheels ø 400 mm Supplied with tension belt Possible to offload drums onto storage pallets or sumps up to 350 mm Without illustration: FK V with solid rubber wheels, Article No. B A FK , Article No. B A 212

213 DRUM HANDLING How they work: TILTING DRUM CART FOR 200 LITER DRUMS In a safe and simple way tilting drum carts make it easier to store drums and fill off hazardous substances. The drums are taken up vertically, held in position by the tubular lever bar and tilted into position for transport or filling. Suitable for drums up to 200 liter capacity Stable construction made from powder coated steel tubes RAL sky-blue Max. load 250 kg Version ST for 200 liter steel drums Version K suitable for thin-walled 200 liter steel drums as equipped with metal support rollers For models FKW 200 plastic drip trays are available as accessory; models FKW-AW 200 are equipped with a large steel sump tray as standard All models equipped with lever arm with PVC grip as standard FKW 200 ST (illustration on the left), Article No. B A, with optional plastic drip tray; FKW 200 K (illustration on the right), Article No. B A, with optional plastic drip tray Stopcocks can be found on page 204! FKW-AW 200 K, Article No. B A FKW-AW 200 ST, Article No. B A Model FKW 200 ST FKW 200 K FKW-AW 200 ST FKW-AW 200 K Dimensions L x W x H (mm) 830 x 500 x x 500 x x 650 x x 650 x 600 Wheel set 2 x PVC swiveling castors 2 x PVC swiveling castors 2 x solid rubber wheels 2 x solid rubber wheels 2 x PVC fixed castors 2 x PVC fixed castors 2 x feet 2 x feet Steel sump tray Sump capacity (l) Article No. B A B A B A B A Accessory Article No. Article No. Plastic drip tray B A B A DRUM LIFT TRUCK FOR 200 LITER DRUMS The drum clamp is opened in the lowered position, and is closed by pumping action with the drawbar. When the clamp is closed, the drum is lifted by any further pump action. Because the drum is not to be locked manually, a rapid and efficient movement of drums is ensured. Model FHW Dimensions L x W (mm) 1022 x 722 Lifting height (drum bottom edge) (mm) 85 Max. load capacity (kg) 250 Weight (kg) 53 Article No. B A FHW, Article No. B A 213

214 DRUM HANDLING DRUM CLAMP FKL-40 H DRUM CLAMP FZ-36 H For lifting vertical sealed 200 liter drums For 200 liter drums with rolling hoops or corrugations (drum ø mm) Manual operation Max. load 400 kg Execution: With suspension eyelet for hook, gripping arms with holders, handles For lifting horizontal 200 liter steel drums For 200 liter drums with rolling hoops or corrugations Clamping length mm Manual operation Max. load 360 kg Execution: With suspension eyelet for hook, hand lever locking device FKL-40 H, RAL 2000, Article No. B A FZ-36 H, RAL 2000, Article No. B A DRUM HOIST FSP-R-50 H DRUM LIFTING RING BG-600 H For lifting vertical or For lifting vertical 200 liter horizontal 200 liter steel drums steel drums For 200 liter drums with For 200 liter drums with rolling hoops or corrugations rolling hoops or corrugations (drum ø mm) (drum ø mm) Manual operation Manual operation Max. load 600 kg Max. load 500 kg Execution: Execution: With elbow lever clamp, With safety locking claw, shackle for hook FSP-R-50 H, RAL 2000, Art. No. B A adjustable fine regulation, suspension chains and eyelet BG-600 H, RAL 2000, Art. No. B A LOADING HOOK VH 2004 CROSSBEAM HOOK LT 2002 Place one of the forks in the middle, attach the loading hook and fasten in position with the wing nut L x W (mm) = 200 x 150 Max. load 2000 kg Execution: With shackle and swivel hook Pick up the crossbeam with the forks and fasten in position with the wing nut Max. load 2000 kg Execution: With shackle and swivel hook Please mention the dimensions of the forks in your order! VH 2004, RAL 2000, Art. No. B A LT 2002, RAL 2000, Art. No. B A 214

215 DRUM HANDLING DRUM LIFTING AND TILTING UNIT FKG-II 40 H For lifting vertical or horizontal 200 liter steel drums with manual tilting device Drum lifting: Automatic lifting and fixing the height-adjustable rolling feet For 200 liter drums with rolling hoops or corrugations (drum ø 560 mm) Controlled manual emptying Drum tilting range possible up to 180 Max. load 400 kg Painted in RAL 2000 FKG-II 40 H, Article No. B A DRUM LIFTING AND TURNING CROSSBEAM VKT-40 H-G/HR For lifting vertical or horizontal 200 liter steel drums. The crossbeam can be lifted by fork-lift trucks or cranes. For steel drums ø mm x 900 mm high Manual operation with handwheel Max. load 400 kg Painted in RAL 2000 Execution: Suspension eyelet for hook, fork-lift pockets Height-adjustable rolling feet Handwheel and ball grip VKT-40 H-G/HR, Article No. B A Operation: The drum is clamped by operating the adjusting spindle with the handwheel and then held in position with the safety locking device. The controlled turning movement (up to 360 possible) is carried out by operating the worm drive with the handwheel. For lifting vertical 200 liter steel drums with a fork-lift truck DRUM TILTING DEVICE FKT-ST 40 HR FOR FORK-LIFT TRUCKS For 200 liter drums with rolling hoops or corrugations (drum ø mm) Special versions for plastic drums available on request Drum turning range possible up to 360 Manual operation with handwheel Can be emptied at any height Max. load 400 kg Execution: Frame with fork-lift pockets Side-mounted self-locking worm drive with protective cover Safety chains to stop drum slipping from forks Handwheel and ball grip FKT-ST 40 HR, RAL 2000, Article No. B A 215

216 DRUM HANDLING DRUM GRIPPER ATTACHMENT FA-M1 FOR FORK-LIFT TRUCKS For lifting a vertical 200 liter steel drum Operation: The fork-lift truck moves the forks into the attachment, where they are locked in position by the handwheel and ball grip. The fork-lift truck then approaches the drum and moves the gripper arms below the central drum corrugation or rolling hoop. The contact pressure opens the gripper arms; as soon as they pass the centre of the drum they rebound and automatically hold the drum safely. The driver can now lift the forks and transport the drum safely between the gripper arms. Dimensions L x W (mm) = 1000 x 620 Max. load 600 kg Painted in RAL 2000 FA-M1, Article No. B A DRUM GRIPPER ATTACHMENT FAS-40 H-1 FOR FORK-LIFT TRUCKS For lifting a vertical 200 liter steel drum Operation: The gripper attachment is positioned below the rim of the vertical drum. The automatic clamping device closes and the drum can be lifted and transported. When it is lowered the clamping device releases the drum automatically. Dimensions L x W (mm) = 1200 x 580 Max. load 400 kg Painted in RAL 2000 Other versions, e.g. for 2 drums, are available on request! FAS-40 H-1, Article No. B A 216

217 DRUM HANDLING DRUM LIFTER FHR 300 An automatic locking device, a smooth lift by foot-operated pump and the ability to lower the drum gently by turning a rotary knob are the convincing arguments for the FHR 300. For lifting and moving 200 liter drums either from the ground or from pallets in upright position. Max. load 300 kg Lifting height (lower drum edge) 800 mm Free lift 570 mm Total length 1160 mm Total width 980 mm Weight 75 kg FHR 300, Article No. B A DRUM LIFTER FL 350 The V-shaped base oft the drum lifter FL 350 enables not only to run over euro-pallets but also to raise and place a drum at the corner of pallets. Lifting directly from the ground is of course also possible. The self-closing gripping mechanism guarantees easy handling in any storage environment. Suitable for 60 and 200 liter steel drums Max. load 350 kg Lifting height (lower drum edge) 535 mm Free lift 180 mm Total length 1010 mm Total width 1120 mm Weight 165 kg FL 350, Article No. B A DRUM TILTER FW The drum tilter and lifter FW is a practical tool when working in the workshop. It was designed specifically for the transport and handling of drums. It enables you to lift and maneuver 200 liter steel drums safely and easily with just one person. With the swivel and tilt mechanism a controlled and safe pouring and complete emptying of the drums is possible Max. load 350 kg Lifting height (lower drum edge) 1400 mm Free lift 1020 mm Total length 1340 mm Total width 1075 mm Weight 162 kg FW, Article No. B A 217

218 SPILL RESPONSE SYSTEMS SPILL GUARD - SERIE RED LINE Rotational-molded body of red PE For placing flat on the ground Ideally suited for containing spillage while filling-off Plain surfaces enables to absorb spillage afterwards TSW 1500, Article No. B A TSW 1500, Article No. B A Model TSW 1500 Flexible PE sumps can be found on page 47! External dimensions ø (mm) 1500 Height (mm) 120 Article No. P A PE environmental cabinets can be found on page 48! 218

219 SPILL RESPONSE SYSTEMS DRAIN COVERS Drain covers prevent the ingress of water endangering substances into the sewer system. The excellent ground adaptation of the special seal compensates extreme uneven surfaces. Self-lying drain cover - squared, 625 x 625 mm Article No. B A Self-lying drain cover - round, ø 850 mm, Article No. B A Self-lying drain cover - squared, Article No. B A Traversable design by steel cover plates SEALING MAT - SQUARED Sealing mats prevent the ingress of leaked hazardous substances e.g. into the ground or the sewer system Extremely dense, flexible material (Polyurethan) Adapts ideally to surface conditions Oil and chemical resistant Model AM 460 AM 610 AM 910 AM 1070 AM 1200 External dimensions L x W (mm) 460 x x x x x 1220 Weight (kg) 3,8 6,5 13,75 18,75 24,0 Article No. B A B A B A B A B A AM 1070, Article No. B A SEALING MAT - ROUND Description please see sealing mat - squared Model AMR 305 AMR 510 External dimensions ø (mm) Weight (kg) 2,0 4,0 Article No. B A B A AMR 305, Article No. B A AMR 510, Article No. B A FLEXIBLE SEALING RING Ideally usable as liquid barrier Prevent the ingress of hazardous substances e.g. into the sewer system Universally usable for all duct sizes Model KB 8 KB 10 External dimensions L x W x H (mm) 3000 x 80 x x 100 x 75 Weight (kg) KB 8, Article No. B A Article No. B A B A 219

220 SPILL RESPONSE SYSTEMS The escape of water-endangering liquids or chemicals after an accident unfortunately cannot always be avoided. In order to be able to react immediately in an emergency it is important to have the right products in the right quality present on site. This is the only way to limit damage to persons and the environment. Sorption agents consist of rugged fabrics with a high abrasion resistance and outstanding absorption properties. Absorption capacity up to 20-times their own weight. Ideally suitable for the prevention and containment of environmental damage. Pads can be used as work surfaces or for minor leaks. Rolls are used for the containment of major leaks. Socks are packed in boxes, pads and rolls are in film packs. IKAROS UNIVERSAL SORPTION AGENTS Suitable for the absorption of oils, emulsions and coolants as well as for chemicals such as acids, corrosive alkalis and solvents. The polypropylene fibre sheets are hydrophilic and therefore suitable for the absorption of aqueous solutions. Pads, socks and rolls coloured grey. Version Size Pcs. Absorption Article No. in pack capacity of 1 pack (l) Pads, universal 50 x 40 cm B B Pads, universal 50 x 40 cm B B Rolls, universal 80 cm x 50 m B B cross perforations every 40 cm lengthways perforations every 20 cm Rolls, universal 40 cm x 50 m B B cross perforations every 40 cm lengthways perforations every 20 cm Socks, universal 8 x 120 cm B B IKAROS SORPTION AGENTS FOR OILS For the absorption of oils (hydraulic oil, crude oil, motor oil), coolants and fuels, also from water surfaces. The polypropylene fibre sheets are hydrophobic and can therefore be used outdoor. Oils are absorbed and simultaneously water is ejected. Pads, socks and rolls colored blue. Version Size Pcs. Absorption Article No. in pack capacity of 1 pack (l) Pads, for oil 50 x 40 cm B B Pads, for oil 50 x 40 cm B B Rolls, for oil 80 cm x 50 m B B cross perforations every 40 cm lengthways perforations every 20 cm Rolls, for oil 40 cm x 50 m B B cross perforations every 40 cm lengthways perforations every 20 cm Socks, for oil 8 x 120 cm B B 220

221 SPILL RESPONSE SYSTEM Wherever oily or chemical liquids are stored or transported leaks can cause enormous damage. The emergency sets have been designed to provide all necessary binders and aids immediately if oil, chemicals or other industrial liquids escape to prevent or limit damage to persons and the environment. All emergency sets are available in different containers and qualities that depend on the particular application.. PLASTIC TRANSPORT BOX FOR EMERGENCIES Mobile on 4 rollers W x D x H (mm) = 900 x 450 x 600 Absorption capacity of each model 110 liter Weight 30 kg Model 2714 universal Article No. Model 2715 for oil Article No. Contents: 50 pads, 5 pillows 3 socks 1 pair of protective gloves 1 protective suit 2x 0,5 liter eyewash liquid 10 kg granules 1 dustpan & brush 2 disposal sacks B C Contents: 50 pads, 5 pillows 3 socks 1 pair of protective gloves 1 protective suit 2x 0,5 liter eyewash liquid 10 kg granules 1 dustpan & brush 2 disposal sacks B C PLASTIC CABINET FOR EMERGENCIES Article No. B C With 2 doors For wall mounting W x D x H (mm) = 710 x 305 x 710 Absorption capacity of each model 70 liter Weight 15 kg Model 2997 universal Article No. Model 2998 for oil Article No. Inhalt: 30 pads, 5 pillows 3 socks 1 pair of protective gloves 1 protective suit 2x 0,5 liter eyewash liquid 2 disposal sacks B B Inhalt: 30 pads, 5 pillows 3 socks 1 pair of protective gloves 1 protective suit 2x 0,5 liter eyewash liquid 2 disposal sacks B B EMERGENCY SET IN PLASTIC BAG Article No. B B W x D x H (mm) = 500 x 220 x 500 Absorption capacity of each model 35 liter Weight 10 kg Model 492 universal Article No. Model 493 for oil Article No. Contents: 10 pads 1 sock 5 kg granules 1 pair of protective gloves 2 disposal sacks B B Contents: 10 pads 1 sock 5 kg granules 1 pair of protective gloves 2 disposal sacks B B Article No. B B 221

222 EMERGENCY BODY SHOWERS / EYE WASHES The use of emergency showers ensures important and immediate first aid with water for those affected by contact with hazardous substances. Design complies with EN & 2, ANSI Z Optimal protection of the showers against aggressive atmospheres and the effects of weather by powder coating and/or stainless steel MOBILE EYE WASHES ND / B C: 1 water jet controller protected by dust cover Wall mounting including wall holder Water connection 1/2 inner thread Self-locking valve Stainless steel coated silicone tubing 1,5 m ND / B C: 2 water jet controllers Wall mounting Water connection 3/8 outer thread ABS sump tray, ceramic white Stainless steel valve Water jet controller with dust covers Actuated by pressure plate With safety sign WALL-MOUNTED EYE WASHES ND / B C: 2 water jet controllers Wall mounting Water connection 3/8 outer thread ABS sump tray and cover Stainless steel valve Cover protects against dirt Operated by pressing the button or pulling down the cover With safety sign ND / B C: 2 water jet controllers Water connection 1/2 inner thread Water jet controller with dust covers Operated by press lever EMERGENCY BODY SHOWERS - WALL-MOUNTED EMERGENCY BODY SHOWERS - CEILING-MOUNTED ND / B C: ND / B C: Wall mounting Water connection 1 inner thread Chrome-plated brass valve, tubes galvanized and powder-coated Shower head made from plastic Operated by pull rod Ceiling mounting Water connection 1 inner thread Chrome-plated brass valve, tubes galvanized Shower head made from plastic Operated by pull rod ND / B C: ND / B C: As ND , but made completely from stainless steel Article No. B C As ND , but made completely from stainless steel Art. No. B C SAFETY SIGNS Eye wash safety sign sticker Emergency body shower safety B C sign sticker B C 200 x 200 mm 200 x 200 mm Emergency body shower / eye wash safety sign sticker (not illustrated) B C 400 x 230 mm 222

223 EMERGENCY BODY SHOWERS FREE-STANDING BODY SHOWERS WITH EYE-WASH Specially developed emergency shower systems for industrial use in production, filling plant or store rooms. You can choose between versions with stainless steel tubes and valves or galvanized, white-coated steel tubes and brass valves. All emergency body showers are equipped with water jet spray nozzle according to DIN EN and DIN 12899T3 (2008). Both versions meet and exceed the minimum legal requirements of DIN and EN standards and provide a high water flow for rapid decontamination and wetting. ND / B C: ND / B C: Free-standing emergency shower Free-standing emergency shower combination combination Eye-wash with ABS plastic sump tray Eye-wash with ABS plastic sump tray and stainless steel back wall and cover, with stainless steel back wall Tubes galvanized and powder-coated, Tubes galvanized and powder-coated, chrome-plated brass valve chrome-plated brass valve Eye-wash with two spray heads and Eye-wash with two spray heads and dust covers dust covers Triggered by pull-rod / 90 rotation Triggered by pull-rod / 90 rotation ND / B C: ND / B C: As ND , but made As ND , but made completely from stainless steel completely from stainless steel Article No. B C Article No. B C FROST-FREE EMERGENCY SHOWERS & EMERGENCY SHOWER TANKS Frost-free with heating! Emergency showers have to function properly 24 hours per day and 7 days per week. This also applies to outdoor locations and temperatures below freezing point. Our showers use a selfregulating heating cable in combination with an insulation package to ensure operation under freezing conditions. The system is controlled by a built-in thermostat. All parts coming into contact with water are additionally protected against strong frost by an insulation package with a stainless steel cover. You can choose between different versions and accessories. Emergency showers with storage tank Our special emergency showers with storage tanks are used in areas where water is not permanently supplied or where the water has to be available at a particular temperature. A storage volume of 350 to 1200 liters can be selected, depending on the location and degree of risk. Heated versions are used in outdoor locations to ensure frost-free operation. A thermostat-controlled immersion heater ensures that the set temperature is maintained. Different versions are available on request! Example of a version with heating Example of an emergency shower with storage tank 223

224 INTRODUCTION FIRE FIGHTING TECHNOLOGY Dear Customers, in 2006 LaCont acquired the representation of ADALIT lights of our partner, the company ADARO located in Spain, exclusively for Germany and Switzerland. ADARO manufactures for more than 100 years high-tech lighting for use in explosion-prone areas. The brand ADALIT has established itself in firefighting, emergency and rescue services, security agencies, the military and of course in the industry and has been considered synonymous with solid, long-lasting and dependable safety torches. Safety torch ADALIT L2000 At the international trade fair Interschutz 2010 in Leipzig LaCont introduced its first series of fire department lockers for storage of modern fire protection clothing and personal equipment. After a tremendous response we have developed a full range of fire department lockers. Suggestions and requests of professional fire departments and volunteer firefighters were included in the construction of our flexible and modular range of fire department lockers. Convince yourself of the diversity of our stable and modern fire department lockers from our own production. Fire department locker new range Newly conceived fire hose storage racks complete our range of fire fighting technology. Suction and pressure hoses can be stored clearly arranged and space-saving. Our fire-hose storage cart is a considerable support in handling the hoses. Within the upcoming years we will expand our range of fire fighting technology. Fire hose storage cart Stay tuned! 224

225 CONTENTS FIREFIGHTING TECHNOLOGY 8. Firefighting technology... Rechargeable safety torches ADALIT L2000-L / L2000-LB ATEX page Rechargeable safety helmet torch ADALIT L-10 ATEX page 228 Rechargeable safety helmet lighting ADALIT ALFA WL page 229 Fire department lockers and benches page Fire hose storage page

226 RECHARGEABLE SAFETY TORCHES ADALIT L2000-LB ATEX The ADALIT L2000-LB ATEX meets all the requirements of modern safety torches for firefighters and industrial, military and security companies. Ergonomics, functionality and a rechargeable, maintenance-free lithium-ion battery are quality features of this new safety torch which weighs only 500 grams. The torches are certified as electrical equipment for operating in potentially explosive atmospheres of category 1 and 2 (gas atmospheres) and category 21 and 22 (dust atmospheres) by an authorized materials testing institute. (Test report L.O.M.06 ATEX 2063 X). The ADALIT torches are made from durable anti-static thermoplastic resin of high resistance to mechanical load, extreme temperatures and chemicals. The torch cases are dust-proof - protection level IP 65 according to EN The swiveling head at 90 enables the operator to use the ADALIT torch either as conventional tube- or as knucklehead light. A holster with reflective strips protects the ADALIT torches and allows the attachment to the shoulder straps of respirators or to waist belt. L2000-LB ATEX, Art. No. B A Swiveling head at 90 Torch case with L2000-L and single charger 220V/240V ADALIT L2000-L ATEX The ADALIT L2000-L offers the characteristics of L2000-LB and in addition the following special advantages: L2000-L ATEX, Article No. B A The reflector of ADALIT L2000-L is equipped with high-intensity LEDs. The battery allows increased operating time of 8 hours spread light and 4 hours full beam (durability hours). The ADALIT L2000-L significantly improves the safety of the professionals deployed. The remaining time of light duration of ADALIT is digitally indicated in real time. If the operating time is less than 15 minutes the user is warned by a blinking signal. The batteries are protected by electronic shutdown against total discharge. Digital indication of operating time L2000-L ATEX, Article No. B A 226

227 RECHARGEABLE SAFETY TORCHES TECHNICAL SPECIFICATIONS Model L2000-LB L2000-L European Standard ATEX marking Ex II 2GD Ex ib e IIC T4 Ex II 2GD Ex ia e IIC T4 IP65 T85 C IP65 T85 C Certificate LOM 06 ATEX 2063 X LOM 06 ATEX 2063 X Protection level IP65 IP65 Marking CE CE Features Light duration >3h Main LED: >4h, auxiliary LED: >8h Weight 500 grams 500 grams L x ø max. mm 210 x x 80 Color yellow-black yellow-black Bulbs Type Halogen Light-emitting diodes (LED) VN 3,6 V EN 3,6 W Main LED: 3 W, auxiliary LED: 1 W Light flux 50 lm Main LED: 135 lm, auxiliary LED: 60 lm Battery Type Li-Ion Li-Ion VN 3,7 V 3,7 V Article No. B A B A ADALIT CHARGERS All units are equipped with an electronic shutdown at the end of charge to protect the ADALIT torch from overcharging. EMV certified according to EU regulations 72/245/EEC /28/EC and to TR 041 in 2m/4m tetra band range of Class 5. C.1000, Art. No. B A, C.3000, Art. No. B A, C.5000, Art. No. B A CV.3000, Art. No. B A C.5000, Art. No. B A Model Description Article No. C.1000 Charger for single torch, version 220/240 V B A CV V Charger for single torch, automotive version 12 V B A CV V Charger for single torch, automotive version 12/24 V B A C.3000 Charger for 3 torches, version 220/240 V B A CV.3000 Charger for 3 torches, automotive version 12/24 V B A C.5000 Charger for 5 torches, version 220/240 V B A CV.5000 Charger for 5 torches, automotive version 12/24 V B A ACCESSORY HOLSTER A holster with reflective stripes protects the ADALIT torches and allows the attachment to the shoulder straps of respirators or to waist belt. Art. No. B A 227

228 RECHARGEABLE SAFETY HELMET TORCHES ADALIT L-10 ATEX First rechargeable safety torch specially designed for the firefighter helmets: Suitable for operating in potentially explosive atmospheres. The ADALIT L-10 with LED technology and lithium-ion battery of the latest generation provides an optimum illumination of visual field and provides safety and comfort for the firefighter. TECHNICAL SPECIFICATIONS: Helmet torch: Rotation of 180 High-intensity white LED (durability hours) for illuminating visual field. Light intensity reducible to extend the operating time. Exclusive user location system by means of a blinking and defeatable red LED. Ultra-light (180 grams), with rechargeable lithium-ion battery (durability up to 4 years). Indication of remaining operating time and battery charge state. The white LED lights up, subsequent flashing (1 to 3 times) indicates the power of 1 to 3 hours. Low battery warning by indication device (every 5 seconds). The torches are made from durable anti-static thermoplastic resin of high resistance to mechanical load, extreme temperatures and chemicals. Safety certification for operating in potentially explosive atmospheres of category 0, 1 and 2 (gas atmospheres) and category 20, 21 and 22 (dust atmospheres). Fasteners available for different helmet designs. red LED Fixing clip for helmet white LED Chargers: Safety torch for firefighter helmets L-10 with charger C.10 Equipped with an electronic shutdown at the end of charge to protect the torch from overcharging. Check of battery power level. Red LED: load in progress, green LED: charge completed. Charging time is about 5 hours. Various versions for connecting with V and for automotive with V. Marking according to guideline 72/245/EEC e9 (95/54/EC) for electronic compatibility in emergency service vehicles. Model L-10 European regulations ATEX marking Ex II 1 GD Ex ia IIC T4 Ex ia D 20 IP65 T85 C Certificate L.O.M. 06ATEX2057 X Features Weight 180 grams Dimensions 156 x 56 x 48 mm Light duration Normal mode: >3h; economy mode: >6h User location system By means of high-intensity blinking red LED Charge level indicator Blinking LED at beginning of discharge Low battery warning Blinking LED 15 minutes before shutdown Bulbs Type High-intensity LED of solid state WN. White LED: 3 W, Red LED: 1 W Light Flux White LED: 135 lm., Red LED: 30 lm. Battery Type Lithium-ion VN. 3,7 V Accessory Fastening clips for protective helmets Article No. B A Type Description Article No. C.10 Charger for single helmet torch, version 220/240 V B A CV.10.24V Charger for single helmet torch, automotive version 12 V / 24 V B A C.20 Charger for 2 helmet torches, version 220/240 V B A CV.20.24V Charger for 2 helmet torches, automotive version 12 V / 24 V B A C.30 Charger for 3 helmet torches, version 220/240 V B A CV.30.24V Charger for 3 helmet torches, automotive version 12 V / 24 V B A C.40 Charger for 4 helmet torches, version 220/240 V B A CV.40.24V Charger for 4 helmet torches, automotive version 12 V / 24 V B A C.50 Charger for 5 helmet torches, version 220/240 V B A CV.50.24V Charger for 5 helmet torches, automotive version 12 V / 24 V B A 228

229 RECHARGEABLE SAFETY HELMET LIGHTING ADALIT ALFA-WL / ALFA-WL-M1 Developed for the professional operation: Mining, tunneling, industrial plant maintenance, emergency and rescue services as well as canal work Wireless technology: wireless connection of battery and lamp head According to certificate: L.O.M. 10ATEX2026 X Marking of ADALIT lamp: Ex II 2GD Ex ib IIC T4 Ex ibd 21 IP67 T85 C Ex I M2 Ex ib I Additional marking for application in mining: I M1 Ex ia I Lighting conditions bright/dark were detected by a sensor, subsequently light is automatically switched from major to minor light. Therefore no glare effect for facing persons. The ALFA WL is equipped with lithium-ion battery and LED technology (durability hours) Light duration: hours Weight: only 185 grams Sensor Software e.g. for personalized identification in tunnels already available. For use in mines is in proceed. Chargers for single helmet lamp 220/240V respectively charging station for 50 to 100 helmet lamps available for wall mounting or as rack Model ALFA-WL ALFA-WL-M1 (for application in mining) European ATEX marking Ex II 2GD Ex ib IIC T4 Ex II 2GD Ex ib IIC T4 regulations Ex ibd 21 IP67 T85 C, Ex ibd 21 IP67 T85 C, 1 M2 Ex ib I 1 M1 Ex ia I Certificate L.O.M. 10ATEX2026 X L.O.M. 10ATEX2026 X Features Weight 185 grams 185 grams Dimensions 100 x 60 x 67 mm 100 x 60 x 67 mm Light duration Normal mode: >12 h; economy mode: >18 h Normal mode: >12 h; economy mode: >18 h Low battery warning Blinking red LED 15 minutes before shutdown Blinking red LED 15 minutes before shutdown Bulbs Type High-intensity LED High-intensity LED WN. Major light: 3 W, minor light: 1 W Major light: 3 W, minor light: 1 W Battery Type Lithium-ion Lithium-ion VN. 3,7 V 3,7 V Article No. B A B A Type Description Article No. MOWL.1 Charger for single helmet lamp, version 220/240 V B A MOWL.5 Charger for 5 helmet lamps, version 220/240 V B A MOWL.50 Charger for 50 helmet lamps, version 220/240 V B A MOWL.100 Charger for 100 helmet lamps, version 220/240 V B A 229

230 FIRE DEPARTMENT LOCKERS FIRE DEPARTMENT WALL-MOUNTED LOCKERS Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Compartment basic size: W x D (mm) = 400 x 500 Cabinet height with / without helmet stand (mm) = 1750 / 1850 Height-adjustable rails at intervals of 25 mm for flexible interior design Electrolytically-galvanized shelves Stable, high quality frame construction with preparation for wall mounting With inner fittings: 1 open valuable compartment 1 open clothing compartment with clothes rail, 4 clothes hooks and 1 hook for belt Fully perforated cabinet base FGS-B 1275, Article No. B A, with optional helmet stands, valuable compartment doors and foot mats FGS-B 1275, Article No. B A, with optional helmet stands, and doors for valuable and clothing compartments Equipped with combination lock available as accessory Model FGS-B 425 FGS-B 850 FGS-B 1275 FGS-B 1700 External dimensions W x D x H (mm) 425 x 500 x x 500 x x 500 x x 500 x 1750 Number of compartments Effective size valuable compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 423 x 496 x x 423 x 496 x 256 Effective size clothing compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 423 x 496 x x 423 x 496 x 1490 Weight (kg) Article No., Outer body: RAL light grey B A B A B A B A Accessories Valuable compartment door with cylinder lock for 1 section, door hinge DIN right, RAL flame red Valuable compartment door with insertion slot and cylinder lock for 1 section, door hinge DIN right, RAL flame red Clothing compartment with cylinder lock for 1 section, door hinge DIN right, RAL flame red Helmet stand on cabinet roof for 1 section, W x D x H (mm) = 250 x 215 x 100, RAL flame red Helmet stand below valuable compartment for 1 section, W x D (mm) = 422 x 461, RAL light grey Equipment with combination lock each door Foot mat anthracite / yellow, W x D (mm) = 400 x 480 Article No. B A B A B A B A B A B A B A FGS-B 425, Art. No. B A, with optional helmet stand and foot mat 230

231 FIRE DEPARTMENT LOCKERS FIRE DEPARTMENT LOCKERS Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Compartment basic size: W x D (mm) = 400 x 500 Cabinet height with / without helmet stand (mm) = 1900 / 2000 Height-adjustable rails at intervals of 25 mm for flexible interior design Electrolytically-galvanized floors Stable, height-adjustable steel-tube foot construction, height 150 mm to compensate uneven ground With inner fittings: 1 open valuable compartment 1 open clothing compartment with clothes rail, 4 clothes hooks and 1 hook for belt Fully perforated cabinet base FGS-C 1700, Article No. B A, with optional helmet stands and valuable compartment doors FGS-C 1275, Art. No. B A, with optional helmet stands Valuable compartment door with insertion slot available as accessory Model FGS-C 425 FGS-C 850 FGS-C 1275 FGS-C 1700 External dimensions W x D x H (mm) 425 x 500 x x 500 x x 500 x x 500 x 1900 Number of compartments Effective size valuable compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 423 x 496 x x 423 x 496 x 256 Effective size clothing compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 423 x 496 x x 423 x 496 x 1490 Weight (kg) Article No., Outer body: RAL light grey B A B A B A B A Accessories Valuable compartment door with cylinder lock for 1 section, door hinge DIN right, RAL flame red Valuable compartment door with insertion slot and cylinder lock for 1 section, door hinge DIN right, RAL flame red Clothing compartment with cylinder lock for 1 section, door hinge DIN right, RAL flame red Helmet stand on cabinet roof for 1 section, W x D x H (mm) = 250 x 215 x 100, RAL flame red Helmet stand below valuable compartment for 1 section, W x D (mm) = 422 x 461, RAL light grey Equipment with combination lock each door Foot mat anthracite / yellow, W x D (mm) = 400 x 480 Article No. B A B A B A B A B A B A B A FGS-C 425, Art. No. B A, with optional helmet stand, valuable compartment door and foot mat 231

232 FIRE DEPARTMENT LOCKERS TWO-PART FIRE DEPARTMENT LOCKERS Single-wall body made from high-quality powder-coated sheet steel in RAL light grey Compartment basic size: W x D (mm) = 400 x 500 (fire department compartment) and 250 x 500 (private compartment) Cabinet height without / with foot stand (mm) = 1750 / 1900 Electrolytically-galvanized shelves Type D: Stable, high-quality frame construction with preparation for wall mounting Type E: Stable, height-adjustable steel-tube foot construction, height 150 mm to compensate uneven ground With inner fittings: 1 open valuable compartment 1 open clothing compartment with clothes rail, 4 clothes hooks and 1 hook for belt Fully perforated cabinet base 1 private clothing compartment with clothes rail, 2 clothes hooks, delivered with door in RAL sky blue, lockable with cylinder lock FGS-E 1350, Article No. B A, with optional helmet stands and doors for valuable compartments FGS-D 675, Art. No. B A, with optional helmet stand and doors for valuable and clothing compartments FGS-E 675, Art. No. B A, with optional helmet stand and doors for valuable and clothing compartments Equipped with combination lock available as accessory Model FGS-D 675 FGS-D 1350 FGS-E 675 FGS-E 1350 External dimensions W x D x H (mm) 675 x 500 x x 500 x x 500 x x 500 x 1900 Number of fire-department compartments Number of private compartments Effective size valuable compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 496 x x 423 x 496 x 256 Effective size fire-department clothing compartment W x D x H (mm) 423 x 496 x x 423 x 496 x x 496 x x 423 x 496 x 1490 Effective size private compartment W x D x H (mm) 248 x 496 x x 248 x 496 x x 496 x x 248 x 496 x 1748 Weight (kg) Article No., Outer body: RAL light grey Door private compartment: RAL sky blue B A B A B A B A Accessories Valuable compartment door with cylinder lock for 1 section, door hinge DIN right, RAL flame red Valuable compartment door with insertion slot and cylinder lock for 1 section, door hinge DIN right, RAL flame red Clothing compartment with cylinder lock for 1 section, door hinge DIN right, RAL flame red Helmet stand on cabinet roof for 1 section, W x D x H (mm) = 250 x 215 x 100, RAL flame red Helmet stand below valuable compartment for 1 section, W x D (mm) = 422 x 461, RAL light grey Equipment with combination lock each door Foot mat anthracite / yellow, W x D (mm) = 400 x 480 Article No. B A B A B A B A B A B A B A 232

233 FIRE DEPARTMENT BENCHES FREESTANDING FIRE DEPARTMENT BENCHES Stable construction made from square tube with high quality powder-coating RAL light grey Seating surface made from beech wood strips 80 x 20 mm with colorless painting Height-adjustable feet for leveling on uneven ground Model FGB-A 1000 FGB-A 1500 FGB-A 2000 External dimensions W x D x H (mm) 1000 x 350 x x 350 x x 350 x 400 Number of feet Article No. B A B A B A Accessory Article No. Article No. Article No. Additional shoe rack B A B A B A FGS-A 2000, Article No. B A FREESTANDING FIRE DEPARTMENT CLOAKROOM BENCHES Stable construction made from square tube with high quality powder-coating RAL light grey Seating surface, back rest and coat rack made from beech wood strips 80 x 20 mm with colorless painting Height-adjustable feet for leveling on uneven ground FGS-C 1500, Article No. B A with optional shoe rack Example of combination with single-side fire department cloakroom bench, two-part fire department locker and fire department locker Type description Single-side fire department cloakroom bench Double-side fire department cloakroom bench Model FGB-B 1000 FGB-B 1500 FGB-B 2000 FGB-C 1000 FGB-C 1500 FGB-C 2000 External dimensions W x D x H (mm) 1000 x 380 x x 380 x x 380 x x 730 x x 730 x x 730 x 1660 Number of feet Number of double coat hook Article No. B A B A B A B A B A B A Accessory Article No. Article No. Article No. Article No. Article No. Article No. Additional shoe rack B A B A B A B A B A B A 233

234 FIRE HOSE STORAGE FIRE HOSE STORAGE RACKS For clear, stationary storage of suction and pressure hoses of size A - C Mixture of basic and extension units allows extension as required 3 possible shelf heights allow optimal utilization of available storage space Fittings: All shelving parts galvanized Screwless plug-in installation Storage levels height-adjustable at intervals of 25 mm Max. load per storage level 100 kg with uniformly distributed load Max. unit load 500 kg Hose storage level with integrated liquid channel With optional top shelf for the storage of different goods Dismounted delivery for easy self-assembly FW-SLR 2000, Article No. R A, basic unit and FW-SLR 2000, Article No. R A, extension unit Shelving systems for hazardous substances can be found on page 54! FW-SLR 2000, basic unit, Article No. R A and FW-SLR 2000, extension unit, Article No. R A, with optional top shelf Model FW-SLR 2000 FW-SLR 2200 FW-SLR 2500 External dimensions, basic unit W x D x H (mm) 1060 x 535 x x 535 x x 535 x 2500 Numbers of storage levels with liquid channel Article No., basic unit R A R A R A External dimensions, extension unit W x D x H (mm) 1010 x 535 x x 535 x x 535 x 2500 Article No., extension unit R A R A R A Accessories Additional storage level with integrated liquid channel Top shelf Article No. R A R A FW-SLR 2200, Article No. R , with optional top shelf 234

235 FIRE HOSE STORAGE FIRE HOSE STORAGE CARTS For clearly, mobile storage and transport of suction and pressure hoses of size A - C Ideally suited for loading and unloading of a fire department tank pumper Fittings: All shelving parts galvanized Screwless plug-in installation Storage levels height-adjustable at intervals of 25 mm Max. load per storage level 100 kg with uniformly distributed load Max. unit load 300 kg Hose storage level with integrated liquid channel With two swiveling and two fixed castors Dismounted delivery for easy self-assembly Model FW-SLW 1600 External dimensions W x D x H (mm) 1060 x 535 x 1600 Numbers of storage levels with integrated liquid channel 3 Article No. R A FW-SLW 1600, Article No. R A 235

236 INDEX A Absorbents Acid and alkali cabinets Acid-resistant PE-insert...68 Active storage...76, 165 ADALIT chargers ADALIT safety torches and lightning Airbag cabinet Apothecary cabinet...84 Attachment adapter Automatic thermal closing mechanism , , , 145 B Bench cans Benches Body showers C Cabinets for acid and alkalis Cabinets for airbags Cabinets for chemicals and poisons , Cabinets for documents Cabinets for emergencies Cabinets for hazardous substances , Cabinets for pesticides...78 Cabinets for pressurized gas cylinders Cabinets for small gas cylinders outdoors Cabinets PE...48 Cages for gas cylinders Can support Carts... 16, 42-43, Cells for gas cylinders Chargers Checklist...10 Chemicals and poisons cabinet , Collection container for fluorescent tubes Collection container for used batteries Collision protection... 67, 72-74, Collision protection corner , Combi cabinets Compact sump pallets Concrete fire protection storehouse Containers for gas cylinders Container technology Convection heating...159, 175 Corner cabinets...92 Corridor lining Corridor roof Cover panel...101, Cover plate , Crossbeam hook Cross bracing...59 Cross connectors D Depots for hazardous substances Distribution cans Drain covers Drip loss container...44 Drive-on corner Drive-on ramps , 26, 183, Drum cabinets , 99, Drum carts... 16, 42-43, Drum clamp Drum gripper attachment Drum handling Drum hoist Drum key Drum lifter Drum lifting and tilting unit Drum lifting and turning crossbeam Drum lifting ring Drum lift truck Drum pallet Drum racks Drum roller...43, 212 Drum stands PE...41 Drum stands steel...15 Drum tilter Drum tilting device for fork lift trucks Drum valves Drum wrenches E Edge clips Electrical heating / cooling chamber for drum storage Electrical installations Electric heating...159, 183 Element connectors Emergency body showers Emergency opening device Emergency plastic cabinet Emergency set in plastic bag Emergency transport box EN Enclosed water protection sump pallets...19 Environmental cabinets...78 Environmental cabinets PE...48 Explosion-protection zones Ex-proof heating Ex-proof illumination Ex-proof torches Ex-proof ventilation...155, 169 External switchbox Extraction fans Eyewashes F F30 cabinets , F30 gas cylinder storage systems concrete F90 cabinets , , F90 container F90 gas cylinder storage system steel Fans Filling container PE...44 Filling container with stopcock Filling-off canisters Filling racks Filling stands...25 Filling stations Filter attachments for safety cabinets Fire chamber Fire department benches Fire department lockers Fire hose racks Fire hose storage carts Fire protection containers concrete Fire protection containers steel Fire protection container with compartments Fire protection requirements...10,

237 INDEX Fire protection storehouse concrete Fire resistant cabinets , , , 145 Fire resistant gas cylinder cabinets Flame impingement Flammable, easily flammable, highly flammable Flexible PE-sump...47 Flexible sealing ring Floor safety elements Floor safety elements PE...35 Fluorescent tubes collection container Frost-free outdoor storage Fume cupboard underbench cabinets...92 G G30 cabinets Gas cylinder cabinets outdoors Gas cylinder cages Gas cylinder carts Gas cylinder containers Gas cylinder handling Gas cylinder pallets Gas cylinder stands Gas cylinder storage boxes Gas cylinder storage indoors Gas cylinder storage system concrete Gas cylinder storehouses H Hazardous substances cabinets Hazardous substances depots Hazardous substances filter attachment Hazardous substances pallet racks Hazardous substances shelving units Hazardous substances stations Hazardous substances stations PE Heated chambers Heating , 175, Heating ex-proof Helmet torch and lighting Holster Horizontal drum storage , 90, , 124, 126 Hose carts Hose racks I IBC cabinet F IBC containers , , , 189 IBC filling stand...25 IBC filling stand PE...45 IBC pallet racks...74, 162 IBC stations PE IBC sump pallets IBC sumps PE IBC sumps steel , 28 Indoor water protection compartment container...75 Inserts PE , 25, 68 Insulated containers Insulated storehouses J K KTC cabinet F KTC containers , , , 189 KTC filling stand...25 KTC filling stand PE...45 KTC pallet racks...74 KTC stations PE KTC sump pallets KTC sumps PE KTC sumps steel , 28 L Lamp ex-proof Large-volume sump pallets...26 Laws and regulations...52 LED hand and helmet lightning ex-proof Legal basis...52 Loading hook Lockable box cover...30 Lockers M Mobile filling...23 Mobile PE shelf cart...43 Mobile PE sumps...42 Modular surface protection system...23 Moistening cans Moisture-proof lamp N Natural ventilation...153, , , O Outdoor pallet racks Outdoor storage systems , , P Pallet racks Pallet racks outdoors Pallet sumps...15 Passive storage...76, 165 PE box for storing small containers...30 PE cabinets...48 PE drum stands...41 PE environmental cabinets...48 PE filling container...44 PE filling stand for KTC/IBC...45 PE floor safety elements...35 PE hazardous substances stations...50 PE inserts , 25, 68 PE safety transport container PE shelf cart...43 PE stations Pesticides cabinets...78 PE sumps , 36-40, 42-47, 49 PE sumps for drums , PE sumps for KTC/IBC PE sump trays Plant Plastic cabinet for emergencies Plastic drum roller...43 Plastic transport box for emergencies Poison compartment , 106 Practical information...5-7, 10, 52, 76, , 144, 148, 165, 190, 202 Projects Pull-out cabinet...84 Pull-out shelves , Pull-out suspension files Push-in sumps

238 INDEX Push-through pretection Q Quick-up hazardous goods containers R Rack base sumps for pallet racks Ramps , 26, 183, , 199 Rechargeable safety torches and lightning ex-proof Reliability of sumps...52 Rotating drum support...16, 67 Rotating turntable...92, 100, 102 S Safe compartment , Safety bench cans Safety box Safety cabinets , Safety canisters Safety cans Safety chain...18, 194, 198 Safety collection containers Safety container PE Safety containers and canisters stainless steel Safety container technology Safety distance...76, 190 Safety distribution cans Safety filling-off container Safety helmet lighting Safety moistening cans Safety signs Safety storage depots Safety storehouses Safety torches Safety transport containers Safety underbench cabinets Safety waste cans Sealing mat Sealing ring Serie blue line...38, 44 Serie red line...49, 218 Shelf cart...43 Shelving systems Skylight panel Slotted shelf...59 Sorption agents Special containers Spill guard Spill response systems Stackable water protection sump pallets...18 Stacking racks Stainless steel moistening cans Stainless steel shelving...59 Stainless steel sump pallets...28 Standing drum storage indoors...75 Steel and plant construction Steel drum cabinets...17 Steel drum stands...15 Steel sumps Stopcocks Storage boxes for gas cylinders Storage halls Storage indoors...76 Storage of flammable liquids...76 Storage of pressurized gas cylinders , Storage outdoors...76 Storage system for gas cylinders F30 concrete Storage system for gas cylinders F90 steel Storehouses for gas cylinders Sump capacity...52, 109 Sump pallets Sump pallets for KTC Sumps , 49 Sumps PE , 49 Sumps stainless steel...28 Sump trays...12 Surface protection system...23 Suspension sumps...70 Switch box...155, 159 T Tanking area...23 Technical forced ventilation...155, 169 Technical rules for flammable liquids Tension belt...16, 18, 193 Thermo containers Thermo safety storehouses Tool box for welder carts Torches and lightning Torch holster Transport box for emergencies Transport container MB for hazardous substances Transport containers stainless steel TRG cells Type 30 cabinets , Type 90 cabinets , U Underbench cabinets...80, Used batteries container V Valves Ventilation ex-proof...155, 169 Ventilation of hazardous substances storage systems Vertical drum storage , 26-28, 32-40, 50-51, 68, , 75, 86-89, 99, 120, , 126 Vertical drum storage outdoors , 175, 189 W Walk-in fire protection container Wash and dip tank Waste cans Waste transhipment center...23 Water protection compartment containers Water protection compartment containers indoors...75 Water protection storage halls Water protection sump pallets Welder carts X Y Z 238

239

240 Authorized LACONT dealers in Europe Sweden Finland Norway Denmark Lithuania the Nederlands Ireland Belgium Poland Czechia Slovakia France Switzerland Austria Slovenia Hungary Romania Italy Serbia Bulgaria Portugal Spain Greece