FireFree ScandiBoard. Fire Protection of Steel Constructions.

Transcription

1 FireFree ScandiBoard Fire Protection of Steel Constructions

2 FireFree ScandiBoards Light weight Passive Fire Protection of Steel Constructions Tested and classified according to the European standard EN :2009 Earlier tested according DIN , BS and DS Material Class A1 New possibilities in easy fire resistance FireFree ScandiBoard is the fastest product to install in the marked. The product is classified according to the new European standards. The board material is FireFree ScandiBoard and is made of Calcium Silicate. Fast working procedure The solution requires only one board, which ensures a fast working procedure and smooth installation. FireFree ScandiBoard is easy to install. Types, dimensions and weight Facts Easy and quick assembly Lightweight solution High product stability Environmentally correct material quartz free No growing conditions for mold and fungus Benefits Strong and durable material Easy to handle and to install Excellent screw holding capacity Low weight of the final construction Few screws, stables or shot nails Type Weight Thickness Width Length 1 Length 2 Length 3 FireFree ScandiBoard 5,5 kg/m 2 22 mm mm mm mm mm FireFree ScandiBoard 6,3 kg/m 2 25 mm mm mm mm mm FireFree ScandiBoard 7,5 kg/m 2 30 mm mm mm mm mm FireFree ScandiBoard 8,8 kg/m 2 35 mm mm mm mm mm FireFree ScandiBoard 10,0 kg/m 2 40 mm mm mm mm mm FireFree ScandiBoard 11,3 kg/m 2 45 mm mm mm mm mm FireFree ScandiBoard 12,5 kg/m 2 50 mm mm mm mm mm FireFree ScandiBoard 13,8 kg/m 2 55 mm mm mm mm mm FireFree ScandiBoard 15,0 kg/m 2 60 mm mm mm mm mm

3 Installation of FireFree ScandiBoards General FireFree ScandiBoards can be machined with ordinary tools for woodworking. It is not necessary to take any special measures. Safety FireFree ScandiBoard does not contain inorganic fibers or quartz. By machining the machines should be connected to the dust extraction equipment to reduce the amount of dust. Tools FireFree ScandiBoards can be cut with a circular saw or jigsaw. Edges can be sanded or rasped and the plates are assembled with screws, staples or shot nails. See the Table. Surface Requirements If the FireFree Scandi- Boards must be visible, it is possible to mount side rails according to the steel supplier's instructions. See also our suggestions for surface treatment. Transport / storage FireFree ScandiBoards will be delivered on pallets. Place the pallets on a smooth and dry spot and protect them against the weather. Be careful when transporting individual sheets, to avoid damaging the edges. Do not put plates vertical on the edges, as it may damage the corners. Cutting FireFree ScandiBoards are to be cut with an excess of 1-2 mm. For the beams are to be made plugs for mounting between flanges. Plugs are also carried out with an excess of 1-2 mm. Fixing FireFree ScandiBoards can be assembled with screws, staples or shot nails according to the Table. It is not necessary to apply glue under the assumption that all connections are tight. If not, you must apply Nullifire B722 fire mastic in the joints (maximum width 4 mm) before the plates are mounted, so the joint is tight. Fixing methodes Board thickness Screws Staples Shot nails mm Distance Size Distance Size Distance Size mm 4,0 x mm 63 mm Na Na mm 4,0 x mm 63 mm 460 mm 37 mm mm 4,0 x mm 63 mm 460 mm 42 mm mm 4,0 x mm 63 mm 460 mm 47 mm mm 5,0 x 80 Na Na 460 mm 52 mm mm 5,0 x 90 Na Na 460 mm 57 mm mm 5,0 x 100 Na Na 460 mm 62 mm mm 5,0 x 100 Na Na Na Na mm 5,0 x 120 Na Na Na Na

4 Installation of FireFree ScandiBoards for Passive Fire Protection of load bearing steel constructions - when using screws or stables

5 Installation of FireFree ScandiBoards for Passive Fire Protection of load bearing steel constructions of HSQ and closed profiles - when using shot nails

6 Section factors A m /V m -1 when using screws or stables HEA HEB Profil A m /V -4 1 A m /V -3 2 Profil A m /V -4 1 A m /V -3 2 Profil A m /V -4 1 A m /V -3 2 HE 100A HE 100B HE 100M HE 120A HE 120B HE 120M HE 140A HE 140B HE 140M HE 160A HE 160B HE 160M HE 180A HE 180B HE 180M HE 200A HE 200B HE 200M HE 220A HE 220B HE 220M HE 240A HE 240B HE 240M HE 260A HE 260B HE 260M HE 280A HE 280B HE 280M HE 300A HE 300B HE 300M HE 320A HE 320B HE 320M HE 340A HE 340B HE 340M HE 360A HE 360B HE 400A HE 400B HE 450A HE 450B HE 500A HE 500B HE 550A HE 550B HE 600A HE 600B HE 650A HE 650B HEM IPE UPE Profil A m /V -4 1 A m /V -3 2 Profil A m /V -4 1 A m /V -3 2 Profil A m /V -4 1 A m /V -3 2 IPE UPE UNP IPE UPE UNP IPE UPE UNP IPE UPE UNP IPE UPE UNP IPE UPE UNP IPE UPE UNP IPE UPE IPE UPE IPE UPE IPE UPE IPE UPE IPE UPE IPE UPE IPE IPE IPE IPE UNP 1 A m /V -4: 4-sided fire protection 2 A m /V -3: 3-sided fire protection

7 FireFree ScandiBoard thickness for Passive Fire Protection of steel - when using screws and stables R 30 R 60 Design temperature A m /V m ºC 350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest

8 FireFree ScandiBoard thickness for Passive Fire Protection of steel - when using screws and stables R 90 Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest

9 FireFree ScandiBoard thickness for Passive Fire Protection of steel - when using screws and stables R 120 Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest

10 FireFree ScandiBoard thickness for Passive Fire Protection of steel - when using screws and stables R 180 Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest

11 Section factors A m /V m -1 for HSQ and closed profiles when using shot nails RHS/SHS profiles Flat profiles and angel profiles Round* profiles Thickness A m /V m -1 Thickness A m /V m -1 Diameter Thickness A m /V m -1 3, ,3 2, , ,3 4, ,1 2, , ,1 4, , ,9 3, ,9 4, , ,3 3, ,3 5, , , ,7 5, ,3 4, , ,1 5, ,1 6, , ,9 7, , , ,4 8, * Round profiles shall be proteced as a square

12 FireFree ScandiBoard for Passive Fire Protection of steel - for HSQ and closed profiles when using shot nails R 30 Design temperature A m /V m ºC ºC 350ºC 400ºC 450ºC 500ºC 550ºC 600ºC ºC NOTE: If the U/A is placed between two different board thicknesses, please take the thickest R 60

13 FireFree ScandiBoard for Passive Fire Protection of steel - for HSQ and closed profiles when using shot nails Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC NOTE: If the U/A is placed between two different board thicknesses, please take the thickest R 90

14 FireFree ScandiBoard for Passive Fire Protection of steel - for HSQ and closed profiles when using shot nails R 120 Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC NOTE: If the U/A is placed between two different board thicknesses, please take the thickest

15 FireFree ScandiBoard for Passive Fire Protection of steel - for HSQ and closed profiles when using shot nails R 180 Design temperature A m /V m ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC NOTE: If the U/A is placed between two different board thicknesses, please take the thickest

16 Data sheet Data FireFree ScandiBoard 850 FireFree ScandiBoard 850 is a lightweight calcium silicate board, which is tested according to EN ISO 1716:2002, and approved according to EN :2007 as non-combustible, A1. FireFree ScandiBoard 850 has been tested for quartz and asbestos content by The National Institute of Occupational Health, Denmark. No content of quartz or asbestos has been detected. FireFree ScandiBoard 850 is available in thicknesses from mm and can be processed to the dimension needed for a specific construction from a max. size of x mm. Standard sizes Length x width in mm x x x Special sizes and sanding on request. Tolerances in mm Trimmed Sanded Length/width ± 2,5 ± 2,5 Thickness ± 1,5 ± 0,5 Storage The boards will be packed on pallets. Place the pallets on a smooth and dry spot and protect them against the weather. Product profile FireFree ScandiBoard 850 is characterized by: Non-combustibility Extremely lightweight Good mechanical characteristics Frost resistant Low moisture expansion and contraction Good thermal resistance Rot resistant No growing conditions for mould and fungus Environmentally friendly Easy to machine and work with Max. service temp C Bulk density, dry 250 kg/m³ ph value 10,3 Compressive strength (EN : 1995) Modulus of rupture (EN 993-6: 1995) 2,8 MPa 1,7 MPa Coefficient of reversible thermal expansion (BS 1902: section 5.3: 20 C-750 C (68 F F) 5.5x10-6 m/(mk) Coefficient of moisture expansion (DTI 23 C 50%RH to 23 C 10%RH, 4.0x10-3 mm/(m%rh) Coefficient of moisture contraction (DTI 23 C 50%RH to 23 C 100%RH, 0 mm/(m%rh) Sound reduction index Thickness 19 mm 26 db Thickness 38 mm 29 db Thickness 60 mm 31 db Thermal 20 C 0,06 W/(m 200 C 0,08 W/(m 400 C 0,10 W/(m 600 C 0.12 W/(m K) Chemical analysis, typical Silica SiO2 47% Calcium oxide CaO 45% Loss on ignition 1025 C (1877 F) LOI 6% Water content 2,5% Colour Grey Non-combustibility: Tested according to EN ISO 1716:2002 and classified according to the EN :2007 as non-combustible: A1. Page 1 of 1

17 Material Safety Data Sheet MSDS F Material Safety Data Sheet according to 93/112/EF Non combustible material for fire protection 01 Product Identification FireFree ScandiBoard 810 FireFree ScandiBoard 820 FireFree ScandiBoard 830 FireFree ScandiBoard 850 Company Scandi Supply a/s Energivej 2 DK-5492 Vissenbjerg Denmark Phone: Fax: info@scandisupply.dk 02 Hazards Identification No special marking is required 03 Composition Calcium silicate, Substances and CAS No. Calcite, First Aid Measures Inhalation Skin contact Eye contact Burn Other information 05 Fire-fighting measures Extinguishing equipment Risks Personal protective equipment 06 Accidental release. measures Personal protective equipment Environmental protection Clearing 07 Handling and storage Work place Storage Packing 08 Exposure controls/ personal protection Control method and tolerances Breathing protection Hand and skin protection Eye protection Cellulose fibres Due to the physical form of the product, the following precautions are relevant only in case of cutting. Fresh air in case of sickness or discomfort. No special precautions. Rinse eyes in plenty of water The product is non-flammable - - Vacuuming of spills. See item 13 below. No special precautions. No law-enforced requirements. Dry storage recommended. Various standard packing s available. - The use of dust filters is recommended when cutting the product. No special protection required, gloves may be used by handling. Protective glasses recommended when cutting the product. Side 1 af 2

18 Material Safety Data Sheet MSDS F Physical and chemical properties Chemical composition: SiO2 (47%), Al2O3 (0.3%), Fe2O3 (0.3%), MgO (0.6%), K2O (0.1%), Na2O (0.1%), CaO (45%) Loss on ignition 6% Appearance: Greyish, porous board Density (bulk, dry): kg/m3 Melting point: ph: 10,3 Solubility in water (20 C): 0 Solubility (organic): 0 10 Stability and reactivity Stable under normal circumstances. 11 Toxicological. information Inhalation Consumption Skin contact Eye contact Long-term effects C Inhalation of dust may irritate the upper air passage. - No known effects. Mechanical irritation. No known effects. 12 Ecological information - 13 Disposal considerations Spills or waste can be removed as general building waste. Chemical waste group: H. If during use the product takes up foreign substances, this must be taken into account on removal. 14 Transportation. information 15 Regulatory information Danger symbols The product contains Risk regulations Safety regulations Special labelling. regulations National regulations 16 Other Information Application Restrictions of use Training requirements Prepared by Outside classification limits None None None Fire protection product None None Scandi Supply a/s Side 2 af 2

19 Production Plant: Fur Landevej 120 DK Roslev Head Quarters: Scandi Supply a/s Energivej 2 DK Vissenbjerg

20 Scandi Supply a/s Energivej 2 DK-5492 Vissenbjerg Tlf Fax mail@scandisupply.dk In case of fire, buildings need protection, valuables need shielding and human lives must be saved. The cornerstone in this respect is passive fire protection of building constructions, and Scandi Supply is a leading supplier of complete solutions to this end. Safety has top priority for Scandi Supply, and we take pride in choosing the right solution for every task. We never take a task lightly, and we are committed to making it easy for our customers and business partners to create valuable and secure results. Close cooperation is what leads to long lasting relations... With over 20 years experience our advice and guidance are thoroughly tested - just like our products. We constantly work to develop innovative solutions and obtain new approvals. Please contact Scandi Supply to discuss your projects within the field of passive fire protection.