Quick Pole Assembly. Quick, Safe & Effective SAFETY FIRST

Size: px

Start display at page:

Download "Quick Pole Assembly. Quick, Safe & Effective SAFETY FIRST"

Amie Russell
6 years ago
Views:

1 TM Quick Pole Assembly Quick, Safe & Effective SAFETY FIRST CSA certified product One person operation No ladders or lifts required Simplified maintenance Hot dipped galvanized steel and aluminum finishes Free s up catwalks and walkways during maintenance Epoxy coated finishes available

Q U I C K P O L E A S S E M B LY Features & Benefits Certifications Suitable for 180km/h winds* as per AASHTO LTS-4 2001 Steel pole treads are treated and protected to prevent galvanic reaction as

2 Q U I C K P O L E A S S E M B LY Features & Benefits Certifications Suitable for 180km/h winds* as per AASHTO LTS Steel pole treads are treated and protected to prevent galvanic reaction as per AASHTO LTS CSA certified products Construction Sphere shaped, quick knuckle features round edges, preventing injuries and contaminent build-up of components The quick release mechanism is activated using one hand and one pull pin The quick pole assembly blocks at a 90º angle when the pull pin reaches the stopper All quick knuckle hardware is made of stainless steel All mounting brackets hardware are hot dip galvanized * Please contact your All-Struct TM sales representatives for fixture types and mounting height limitations. Quick Pole Assembly Operates in any kind of weather Overall length is 10 (3 m) Pole trade size is 1-1/2 treaded NPT Top pole section is 70 (1.78 m) long Lower pole section is 50 (1.27 m) long Quick Knuckle Assembly Rotates 180º (90º left and right) around knuckle s center axis allowing freedom of installation and easy adjustment Easy one man operation. After center bolt is loosen, use the pull pin to lock and unlock the assembly Brackets Universal mounting for 2 to 3 angle iron railings Quick mounting brackets can be installed inside or outside the guardrails Quick knuckle assembly should be mounted above hand rail allowing the pole sections to rotate before final positionning

3 Q U I C K P O L E A S S E M B LY Galvanized Standard Kit Description Retrofit Kit Description Overall height of 10 (3 m) 1-1/2 NPT treads at both ends Installed with two rail mounting brackets 1. Rotating Quick Knuckle Assembly 2. Angle Iron Mounting Brackets allowing the pole section to rotate before final positionning Overall maximum and predetermined height of 10 (3 m) once assembled Can be adapted to existing pole Upgrades existing assembly with quick and easy maintenance features See instruction sheets provided with product for installation details 1 1. Rotating Quick Knuckle Assembly 1 2. Tapered Adaptor, fits over Standard 1-1/4 or 1-1/2 NPT Pipe 2 2 Q-P-5-10 RQ-P-5-10 All All-Struct products are assembled or manufactured in Thomas & Betts ISO 9001 certified facilities and are designed to CSA and/or AASHTO standards. WARRANTY: Thomas & Betts warrants its products to be free from defects in materials and workmanship for a period of one year from the invoice date under normal use and service. All goods found to be defective within this period after verification by Thomas & Betts shall be replaced or repaired by Thomas & Betts free of charge. The warranty excludes fatigue failure or similar phenomena resulting from vibration or resonance associated with improper installation, overloading, misuse, abuse or neglect. Further, labor required to remove and/or reinstall original or replacement products shall be the responsibility of the customer. In addition, this warranty does not cover alterations, modifications, or additions unless the change is acknowledged and accepted, in advance in writing, by Thomas & Betts. E.P.A.: The allowable effective projected areas listed for this product are intended to be for hazardous location luminaires. For other type of applications (cameras, banner arms, wiring, signs or any other type of product), please contact your All-Struct TM sales representative for assistance in selecting the correct structure or product All rights reserved. Printed in Canada. 03/10/3500 Order No. QUICKPOLEBROCHURE-E

4 Q U I C K P O L E A S S E M B LY Universal Bracket Kit AMB-QP-BKT RMB-QP-BKT Description Quick bolt-on installation, no welding or drilling Can be attached to angle iron guardrails up to 3 Can be installed on tubular structures less than 2 O.D. Allows the pole sections to rotate before final positionning

5 industrial lighting fixtures for hazardous locations and adverse environments From an offshore oil rig in the Atlantic Ocean to the oil sands of Northern Alberta, there s a Hazlux lighting fixture to stand up to virtually every hazardous location in Canada. Here is a list of some of the places you ll find Hazlux fixtures: Chemical manufacturing and processing plants Oil refineries Oil drilling rigs Offshore platforms Pipeline pumping stations Pulp and paper plants Aluminum and copper smelting Steel mills and foundries Mining operations Grain handling facilities Flour, sugar and starch processing Food processing plants Paint and rubber manufacturing facilities Marine and coastal facilities Shipyards and shipbuilding plants Power generation plants Waste treatment facilities Paint, chemical and plastic mixing/storage areas Bulk truck terminals Solvent/cleaning areas Hazlux lighting fixtures are also built to withstand the harsh environmental conditions that exist in real working environments. hose-down and wet locations high ambiant temperature areas corrosion and abrasion ice and artic conditions vibration, seismic shock, vandalism dust blanket marine duty option wind Quick Pole Assembly by All-Struct TM

6 TM Plant 1800 Hymus Boulevard Dorval, Quebec H9P 1J5 Tel.: Toll Free: Fax: Regional Sales Offices Atlantic Region 106 Chain Lake Drive, Unit 2C Halifax, Nova Scotia B3S 1A8 Tel.: (902) Toll Free: Fax: (902) Quebec Region 7900 Taschereau Boulevard Building D, Suite 108 Brossard, Quebec J4X 1C2 Tel.: (450) Toll Free: Fax: (450) Ontario Region 2000 Argentia Road Plaza 5, Suite 500 Mississauga, Ontario L5N 2R7 Tel.: (905) Toll Free: Fax: (905) Western Region th Street, #1 Surrey, British Columbia V3S 3C5 Tel.: (604) Toll Free: Fax: (604) Eleniak Road Edmonton, Alberta T6B 2S1 Tel.: (780) Toll Free: Fax: (780) Toll Free: All information and specifications contained in this catalogue are subject to change due to engineer design errors and omissions. Illustrations and diagrams within this catalogue may vary from actual products.

Lithium-Ion Battery-Powered Tools

Lithium-Ion Battery-Powered Tools Thomas & Betts. Your best connection for innovative solutions. Wire & Cable Management Cable Protection Systems Power Connection & Control S a f e t y Te c h n o l o g