Concealment Trolleys

Transcription

1 Concealment Trolleys

2 2 Medical Records Medical Records Trolleys MR240 MR200 MR210 MR220 fax: +44 (0) MR230 Medical Records Trolleys - Small Available with either (model dependent): Open sides, lift up flap and lower shelf Locking and lower shelf Open sides, lift up flap and x-ray pigeon hole Locking and x-ray pigeon hole Open sides, lift up flap, lower shelf and high capacity storage Maximum load for work flap 2.0kg Document rack with two storage pockets fitted to end or side of trolley 100mm swivel castors Filing pockets not included, please see options Paint - Spearmint/Grey Lids/Flaps - Spearmint Options ZP010 - Ring Buffers See Page 5 For Filing Pockets Filing Capacity Standard High Capcity Narrow 470mm 940mm Wide 380mm 760mm Carefile Pocket Options Narrow 380mm Centres Wide 470mm Centres Item CF/F/PK10 CF/X/PK10 CF/XF/PK10 CF/WF/PK10 CF/WX/PK10 CF/WXF/PK10 MR200 MR210 MR220 MR230 MR240 You cannot mix narrow and wide pockets in the same filing section Item Description (w x d x h) Weight MR200 Open Sides, Lower Shelf & Work Flap 627 x 522 x 997mm 18.0kg MR210 Locking Top, Lower Shelf 671 x 522 x 1056mm 27.2kg MR220 Open Sides, X-Ray Pigeon Hole & Work Flap 627 x 522 x 997mm 24.0kg MR230 Locking Top & X-Ray Pigeon Hole 671 x 522 x 1056mm 31.6kg MR240 High Capacity & Work Flap 576 x 584 x 997mm 21.2kg When fully open MR210 and MR230 trolley length is approximately 1190mm

3 Medical Records Trolleys Medical Records 3 Medical Records Trolleys - Medium Available with either (model dependent): Open sides, lift up flap and lower shelf Locking and lower shelf Open sides, lift up flap and x-ray pigeon hole Locking and x-ray pigeon hole Maximum load for work flap 2.0kg Document rack with two storage pockets fitted to end or side of trolley 100mm swivel castors Filing pockets not included, please order separately Paint - Spearmint/Grey Lids/Flaps - Spearmint Options ZP010 - Ring Buffers See Page 5 For Filing Pockets Filing Capacity - Narrow - 695mm Carefile Pocket Options Narrow 380mm Centres Item CF/F/PK10 CF/X/PK10 CF/XF/PK10 MR300 MR310 MR320 MR330 You cannot mix narrow and wide pockets in the same filing section MR330 MR300 Item Description (w x d x h) Weight MR300 Open Sides, Lower Shelf & Work Flap 851 x 522 x 997mm 20.8kg MR310 Locking Top, Lower Shelf 920 x 522 x 1056mm 34.4kg MR320 Open Sides, X-Ray Pigeon Hole & Work Flap 851 x 522 x 997mm 29.0kg MR330 Locking Top & X-Ray Pigeon Hole 920 x 522 x 1056mm 39.6kg When fully open MR310 and MR330 length is approximately 1420mm MR320 Sales Hotline: +44 (0) MR310

4 4 Medical Records Medical Records Trolleys Medical Records Trolleys - Large MR410 MR400 MR420 Available with either (model dependent): Open sides, lift up flap and lower shelf Locking and lower shelf Open sides, lift up flap and x-ray pigeon hole Locking and x-ray pigeon hole Open sides, lift up flap, lower shelf and high density storage Maximum load for work flap 2.0kg Document racks with two storage pockets fitted to end or side of trolley 100mm swivel castors Filing pockets not included, please order separately Paint - Spearmint/Grey Lids/Flaps - Spearmint Filing Capacity Options Standard High Capcity ZP010 - Ring Buffers Narrow 940mm 1880mm Wide 760mm 1520mm Carefile Pocket Options Narrow 380mm Centres Wide 470mm Centres Item CF/F/PK10 CF/X/PK10 CF/XF/PK10 CF/WF/PK10 CF/WX/PK10 CF/WXF/PK10 MR400 MR410 MR420 MR430 MR440 You cannot mix narrow and wide pockets in the same filing section MR430 MR440 sales@bristolmaid.com fax: +44 (0) Item Description (w x d x h) Weight MR400 Open Sides, Lower Shelf & Work Flaps 1158 x 584 x 997mm 28.0kg MR410 Locking Top, Lower Shelf 1240 x 522 x 1056mm 46.4kg MR420 Open Sides, X-Ray Pigeon Hole & Work Flaps 1158 x 584 x 997mm 40.0kg MR430 Locking Top & X-Ray Pigeon Hole 1240 x 522 x 1056mm 53.6kg MR440 High Capacity & Work Flaps 1158 x 584 x 997mm 36.0kg When fully open MR410 and MR430 trolley length is approximately 2085mm

5 Filing Pockets Medical Records 5 Carefile Filing Pockets Range of PVC filing pockets suitable with Bristol Maid trolleys and most standard filing suspension systems Provides a durable alternative to paper or card types Versions available for 380 or 470mm spacings/centres* Fire retardant PVC coated nylon fabric with stainless steel runners Unique stay-put tab holders and pink and blue reversible card tabs Supplied in packs of ten *See compatibility chart Vinyl - Grey CF/F/PK10 CF/WF/PK10 CF/WXF/PK10 Carefile Pocket Options R/C/TH Narrow Pockets 380mm Spacings/Centres Wide Pockets 470 Spacings/Centres Item CF/F/PK10 CF/X/PK10 CF/XF/PK10 CF/WF/PK10 CF/WX/PK10 CF/WXF/PK10 MR200 MR210 MR220 MR230 MR240 MR300 MR310 MR320 MR330 MR400 MR410 MR420 MR430 MR440 MR500 MR510 CF/WX/PK10 CF/XF/PK10 CF/X/PK10 Item Description Pocket Dimensions (internal) (w x h) CF/F/PK10 Foolscap (x 10) 360 x 260mm CF/X/PK10 X-Ray (x 10) 360 x 460mm CF/XF/PK10 X-Ray/Foolscap (x 10) X-ray x 460mm Foolscap x 260mm CF/WF/PK10 Wide Foolscap (x 10) 450 x 260mm CF/WX/PK10 Wide X-Ray (x 10) 450 x 460mm CF/WXF/PK10 Wide X-Ray/Foolscap (x 10) X-ray x 460mm Foolscap x 260mm Paper Tabs & Tab Holders R/C/T Paper Tabs (x 500) R/C/TH Tab Holders (x 25) Sales Hotline: +44 (0)

6 6 Medical Records Medical Records Workstation Medical Record Workstations - X-Ray Compartment/Open Cupboard Available with one or two locking drawers* Lower section available with x-ray pigeon holes (12 sections) or with an open cupboard (no door) Document rack with two storage pockets fitted to the end of the trolley Push handle fitted to one end Low level bumper rail to protect the fabric of the building 80mm swivel castors, 2 off braking Filing pockets not included, please order separately *To maximise safety, the MR510 & MR515 are fitted with an anti-tilt mechanism to prevent both drawers from being opened at the same time 545 x 590 x 1010mm Options/Accessories CF/F/PK10 - Filing Pockets Paint - Grey Body/Drawers - White/Spearmint See Page 5 For Filing Pockets MR505 MR510 MR500 sales@bristolmaid.com fax: +44 (0) Item Description (w x d x h) Weight MR500 Single Drawer, X-Ray Pigeon Hole 545 x 590 x 1010mm 54.5kg MR505 Single Drawer, Open Cupboard 545 x 590 x 1010mm 54.0kg MR510* Double Drawer, X-Ray Pigeon Hole 1000 x 590 x 1010mm 90.5kg MR515* Double Drawer, Open Cupboard 1000 x 590 x 1010mm 89.5kg *Due to weight, we recommend that these units are used as stationary workstations

7 Transfer Trolleys Medical Records 7 MR150/ZP010 MR130 MR140 Transfer Trolleys - Ring Binder, Lever Arch File Transfer Trolleys - Single Box Accepts thirty ring binders or twenty standard lever arch files* Sloping shelves Eight Adjustable dividers 100mm swivel castors *Max file height 350mm Paint - Spearmint/Grey Top - Spearmint Item Description (w x d x h) Weight MR150 Ring Binder, Lever Arch File 830 x 385 x 1005mm 23.5kg MR150/ZP010 Ring Binder, Lever Arch File, Ring Buffers 905 x 460 x 1005mm 24.7kg Trolley for the transportation of bulk case notes and X-rays Records stored in an upper box (bottom of box positioned 520mm to floor) Lower tray Available with a locking lid (CAM lock) to provide secure storage of patient records 100mm swivel castors Max load 50kg Paint - Spearmint/Grey Item Description (w x d x h) Weight MR130 Open Top 817 x 523 x 975mm 16.0kg MR130/ZP005 Open Top, Ring Buffers 892 x 560 x 975mm 17.2kg MR140 Locking Lid 817 x 523 x 975mm 19.0kg MR140/ZP005 Locking Lid, Ring Buffers 892 x 560 x 975mm 20.2kg Sales Hotline: +44 (0)

8 8 Medical Records Transfer Trolleys Medical Records Transfer Trolleys - Double Box Trolley for the transportation of bulk case notes and x-rays Records stored in two removable boxes Lower - Top of box 440mm to floor Upper - Top of box 975mm to floor Clearance between upper and lower boxes, 235mm 100mm swivel castors Max load (per box) 25kg Paint - Spearmint MR105 Item Description (w x d x h) Weight MR105 Double Box 940 x 425 x 1040mm 24.0kg MR105/ZP005 Double Box, Ring Buffers 1010 x 495 x 1040mm 25.2kg MR110 Medical Records Transfer Trolleys - Double Box, Extending Trolley for the bulk transportation of case notes and x-rays Upper box fixed, lower box extends on precision runners for access Latch secures lower box during transportation 125mm swivel castors/200mm wheels (braking) Ring buffers fitted to front of unit Max load (per box) 25kg 875 x 598 x 1040mm Paint - Spearmint Item Description Weight MR110 Double Box, Extending 31.6kg sales@bristolmaid.com fax: +44 (0)

9 Transfer Trolleys Medical Records 9 Trolley Seperates for easy access 5AM3XRAY Medical Records Transfer Trolley - Double Box, Duo Unique two trolley system for the bulk transportation of case notes and x-rays Allows trolleys to be loaded independently, before being linked together and transported Trolleys link together using a simple clevis pin 100mm swivel/braking castors & 200mm wheels (braking) Max load (per box) 25kg 866 x 522 x 970mm Paint - Spearmint/Grey MR120 Item Description Weight MR120 Double Box, Duo 34.6kg Medical Records Cabinet - X-Ray Filing Lockable x-ray filing cabinet (complete with dividers) Three drawers fitted with heavy duty ball bearing slides Anti-tilt device prevents more than one drawer being opened at the same time Offers total filing capacity of 1740mm, 580mm per drawer* * Suspended filing is not compatible with this unit 866 x 522 x 970mm Paint - Grey Item Description Weight 5AM3XRAY X-Ray Filing Cabinet 75.0kg Sales Hotline: +44 (0)

10 10 General Information Dimensions & Weight Dimensions are stated in millimetres (width x depth x height) Weights are stated in kilograms Please ensure you are aware of the item size and weight prior to ordering Castors All castors are fitted with non-marking tyres (with the exception of some antistatic versions) Anti-static castors can be identified by a yellow thread guard or a yellow mark on the edge of the tyre Castors are selected to suit the anticipated use of the trolley/piece of equipment Castors and wheel bearings do not require specific maintenance other than regular cleaning. The use of oil will breakdown the grease applied to the bearings, reducing the life of the castor. We recommend that fittings are checked regularly and re-tightened as required Where anti-static castors are fitted, we recommend that the tyre is periodically cleaned to remove any dirt to ensure a good contact between the tyre and the floor Locks & Keys Locks should operate smoothly. If they do not, please arrange urgent attention and where necessary obtain a replacement Locks require only minimal maintenance and should only be lubricated using a dry lubricant such as graphite which can be purchased from most locksmiths (NEVER USE OIL) When ordering replacement locks or keys, please ensure that the product code, and any letters/numbers from the key and lock are available Paint Stainless Steel We use 304 and 430 grade stainless steel Grade 304 is non-magnetic and used on products which are not painted Grade 430 is magnetic and used on painted products Other grades are available on request, i.e. 316 Please note that the term stainless is not entirely accurate, as certain chemicals can eat into the surface. In particular iodine which can badly corrode/stain and as a result should not be used as a cleaning agent Laminate & Wood Products Wood products are manufactured from FSC accredited materials Flame retardant High Pressure Laminate bonded to MDF Melamine faced MDF Edges are protected with 2mm ABS/T-Barb edging or sealed with varnish Both laminate and melamine panels offer some resistance to water penetration under normal usage We only use water based adhesives and varnishes Upholstery Upholstered panels are manufactured from Flame Retardant materials, independently tested to BS5852 Ignition Source 5 (BS7176 Medium Hazard) Vinyl s offer resistance to: Melsept SF - Code CH - B:4422M32 (0.5% / 5%) Hexaquart S - Code CH - B: (1.5% / 5%) Meliseptol - Code CH - B:4273M92 (Undiluted) All foam is Fire Retardant and free of Hexa-Bromo-Cyclo-Dodecane Latex All products are latex free We only use lead-free epoxy/polyester powder paint Where possible colours are applied in special booths to allow for overspray to be recycled Alterative colours are available, this may be incur a small surcharge sales@bristolmaid.com fax: +44 (0)

11 General Information 11 Standards & Symbols Signifies that the product conforms with applicable European directives Signifies that the product has been tested to European standards for electromagnetic compatibility Meets appendix A (Stability Requirements) of BS3619:1976 Mobile Infusion Stands Meets BS4068: 1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists use Cleaning The maintenance of high standards of cleanliness on all surfaces and equipment is a crucial factor in the prevention and control of infection. Whilst dust, dirt and moisture can harbour infection, the key risks are associated with contamination arising from contact with blood, body fluids, mucous membranes and damaged skin. In all cases surfaces must be thoroughly cleaned and disinfected in order to destroy pathogenic micro organisms. Bristol Maid TM products have been designed for use in demanding environments; full cleaning instructions can be downloaded from Signifies that the product does not use any hazardous substances in its electrical components Flame Retardant Meets BS1765: Part 1: 1990 Specification for general purpose bedside lockers for patients (with the exception of door hinges which are more robust and practical) Meets BS2483:1977 Specification for overbed tables WEEE Regulations Hospital Metalcraft meets its obligations as a business to business producer of Electrical and Electronic Equipment (EEE) through: Membership of the Veolia Environmental Services WEEE, (Waste Electrical and Electronic Equipment), Producer Compliance Scheme (Registration No. WEE/KE0677RX) Marking EEE placed on the market by Hospital Metalcraft with the mandatory crossed out wheeled bin symbol and Bristol Maid logo Resistant to Cold Liquids Five Pin - BS3621 Anti Pick & Drill, Key Retaining Five Pin Cylinder Lock Resistant to Mechanical Damage Department of Health Green Book Six Pin - BS3621 Anti Pick & Drill, Key Retaining Six Pin Cylinder Lock Independently tested to BS2881: 1989 (Security Level One) Specification for Cupboards for the Storage of Medicines in Health Care Premises Making information available, (for EEE placed on the market after April 2007), to assist those engaged in treatment, recovery and recycling activities Arranging for the collection, treatment, recovery and environmentally sound disposal of obligated WEEE Customers are advised that infected medical devices are not included within the scope of the WEEE Regulations and that arrangements described above do not extend to such products Bristol Maid website () and Terms & Conditions refer Independently tested to UN Certificate of Packaging Performance for the Transportation of Clinical Waste Meets The Misuse of Drugs (Safe Custody) Regulations 1973 Sales Hotline: +44 (0)

12 12 Colour Charts Paint Colours (Lead-free Epoxy/Polyester) Laminate Colours (Flame Retardant) White Red Spearmint Light Grey Cream Claro Lagon Bianco Especial Gris Paloma Signal Yellow Signal Blue Signal Green Signal Blown Chene de Meymac Charme d Amboise Black Orange Purple Upholstery Colours (Flame Retardant) Melamine Granite Blue Sand Dune Forest Green Graphite Ivory Spearmint Beech Bristol Blue Flame Red Aquamarine Onyx Black sales@bristolmaid.com fax: +44 (0) Please note that due to discrepancies with colour reproduction the shades depicted here may differ slightly from the finished product

13 General Information 13 How To Order All orders are required in writing, either by fax, or post. Unfortunately we cannot accept orders over the phone Orders should be submitted as an official purchase order on company headed paper. All information should be clearly displayed Your order should contain the following - invoice address, delivery address, full contact details (name, phone & fax number) item codes along with descriptions and prices If applicable, please ensure our quote number is detailed on your order to ensure any agreed discounts are applied Item codes and descriptions in this catalogue supersede all previous editions A full price list can be requested from our website Payments can be made by cheque, bank transfer or credit/debit card (with the exception of American Express) If you are a new customer, the first three orders will be processed on a proforma basis, paid in full prior to manufacture & delivery, after which a credit account may be applied for For our terms and conditions refer to For further information and assistance, please contact our customer services team on +44 (0) After Sales Service & Support Bristol Maid products are designed and manufactured to meet the demands of everyday use, which under normal conditions should provide many years of trouble free operation. Please contact our Customer Services Team to discuss your requirements: Product placement & removal of packaging Installation & commissioning Training Supply of spare parts Full service & repair support Maintenance contracts Site audit & equipment recommendations Regional Sales Team Senior Account Manager (Northern) Steve Poller spoller@bristolmaid.com Sales Representative Andrew McBennett amcbennett@bristolmaid.com Sales Representative Jeremy Russell jrussell@bristolmaid.com Sales Representative James Maplethorpe jmaplethorpe@bristolmaid.com Senior Account Manager (Southern) Tony Coubrough tcoubrough@bristolmaid.com HTM71 Storage, Material Flow & Asset Management Solutions Product Manager Matthew Poole mpoole@bristolmaid.com Export Sales Manager Chris Morgan (0) cmorgan@bristolmaid.com Sales Representative John Baines jbaines@bristolmaid.com Sales Representative James Brown jbrown@bristolmaid.com Sales Hotline: +44 (0)

14 Furniture & Equipment For The Medical World Based in Blandford Forum, Dorset we design, manufacture and distribute the extensive range of Bristol Maid medical furniture together with other complimentary products from selected partners. With a broad portfolio and a comprehensive support team we are proud to provide a responsive and flexible service to meet our customer s needs. With over 58 years experience, the Bristol Maid brand has become synonymous with quality, durability and reliability, with a wide range of customers including the NHS, Private Healthcare Sector, Pharmacies and a growing network of Distributors throughout the UK, Ireland and many other countries around the world. Working with our customers we are continually developing and enhancing our product ranges to ensure that they are fit for purpose, easy to use, reliable and above all represent value for money. We hope that you find this catalogue useful and welcome your suggestions on any improvements. Blandford Heights, Blandford Forum, Dorset. D11 7TG, UK Tel: +44 (0) Fax: +44 (0) sales@bristolmaid.com