SAN FRANCISCO UNIFIED SCHOOL DISTRICT FACILITIES, DESIGN AND CONSTRUCTION ADDENDUM NO. 1

Transcription

1 SAN FRANCISCO UNIFIED SCHOOL DISTRICT FACILITIES, DESIGN AND CONSTRUCTION ADDENDUM NO. PROJECT: OWNER: Security and Prop 9 Energy Upgrades at Jefferson Elementary School DATE: April, 8 7 Irving Street, SF, CA 9 SFUSD Project No. San Francisco Unified School District San Francisco, CA 9 Notice is hereby given to all prospective bidders that plans and specifications on the subject project are modified as hereinafter set forth. This Addendum shall be attached to and form a part of the plans and specifications. All bidders must acknowledge receipt of this addendum on the Bid Form. In case of difference with previous addenda or communications, this addendum takes precedence. It is the responsibility of all bidders to notify all subcontractors from whom they request bids and from whom they accept bids of all changes contained in this addendum. PROJECT MANUAL. Item No. PM- Reference: Description:. Item No. PM- Reference: Description: Division, Section, Bid Form Delete Bid Form and REPLACE with new BID FORM dated //8. Division, Section, Alternates Add Section, Alternates, dated //8, to the Project Manual.. Item No. PM- Reference: Specification 6, Luminaires and Accessories Description: Revise Lumen value and Beam type for lighting fixture Type L6; ADD 7- page lighting fixture Type L6 cut sheets. DRAWINGS. Item No. AD- Reference: DRAWING G., COVER SHEET Description: Identified scope of bid alternate and bid alternate. Powell Street, San Francisco, CA 99 p 9.6. f.6. SAN FRANCISCO SACRAMENTO SANTA ROSA

2 Security and Prop 9 Energy Measure Project at Jefferson Bid Addendum # February 8, 8. Item No. AD- Reference: DRAWING M., SYMBOLS, ABBREVIATIONS AND GENERAL NOTES Description: Identified scope as bid alternate.. Item No. AD- Reference: DRAWING M.D, BASEMENT PLAN - DEMOLITION Description: Identified scope as bid alternate.. Item No. AD- Reference: DRAWING M.D, FIRST FLOOR PLAN - DEMOLITION Description: Identified scope as bid alternate.. Item No. AD- Reference: DRAWING M.D SECOND FLOOR PLAN SOUTH - DEMOLITION Description: Identified scope as bid alternate. 6. Item No. AD-6 Reference: DRAWING M., BASEMENT PLAN - MECHANICAL Description: Identified scope as bid alternate. 7. Item No. AD-7 Reference: DRAWING M., FIRST FLOOR PLAN - MECHANICAL Description: Identified scope as bid alternate. 8. Item No. AD-8 Reference: DRAWING M., SECOND FLOOR PLAN SOUTH - MECHANICAL Description: Identified scope as bid alternate. 9. Item No. AD-9 Reference: DRAWING M., DETAILS AND SCHEDULES Description: Identified scope as bid alternate.. Item No. AD- Reference: Description: DRAWING E.D, SECOND FLOOR PLAN - DEMOLITION Showed existing combo exit signs at classrooms 6, 8 & to be demolished; Showed existing lighting and wall mounted switch inside closets by the stairs # and # (total of ) to be demolished.. Item No. AD- Reference: DRAWING E., SECOND FLOOR PLAN - LIGHTING Description: Added new combo exit signs at classrooms 6, 8 & ; Added new lighting and wall mounted occupancy sensors inside closets by the stairs # and # (total of ).. Item No. AD- Reference: DRAWING P., SYMBOLS, ABBREVIATIONS AND Page

3 Security and Prop 9 Energy Measure Project at Jefferson Bid Addendum # February 8, 8 GENERAL NOTES Description: Identified scope as bid alternate.. Item No. AD- Reference: DRAWING P.D, BASEMENT PLAN - DEMOLITION - PLUMBING Description: Added note regarding direction to contractor to remove the existing water heater without damaging it and deliver it to SFUSD s Buildings & Grounds office. Identified scope as bid alternate.. Item No. AD- Reference: DRAWING P., BASEMENT PLAN - PLUMBING Description: Identified scope as bid alternate. END OF ADDENDUM ITEMS ATTACHMENTS: Project Manual: Section Bid Form ( pages, dated //8) Section Alternates ( pages, dated //8) Section 6 (Luminaires and Accessories) Fixture Type L6 Cut Sheets (7 pages) Drawings (all dated //8): G. () x sheet M. () x sheet M.D () x sheet M.D () x sheet M.D () x sheet M. () x sheet M. () x sheet M. () x sheet M. () x sheet E.D () x sheet E. () x sheet P. () x sheet P.D () x sheet P. () x sheet END Page

4 JEFFERSON ELEMENTARY SCHOOL SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJECT NO. SAN FRANCISCO UNIFIED SCHOOL DISTRICT SECTION BID FORM (Issued with Addendum No. ) Contractor: Bid Opening Date: Submit to the San Francisco Unified School District, Lobby, San Francisco, CA 9. San Francisco Unified School District will date/time stamp each bid upon receipt at the Lobby. Bid proposal must be received and time stamped before: <April 7, 8 : P.M..>. Bid for: Project: Jefferson Elementary School Security and Prop 9 Energy Upgrades 7 Irving Street, SF, CA 9 The undersigned hereby declares that he has fully investigated the existing conditions at the project site and carefully examined all of the Contract Documents as prepared by Guttmann and Blaevoet Consulting Engineers. The undersigned has examined all Bidding Documents and the site for the above project and agrees to furnish and pay for all labor, material, equipment, plant, appurtenances, services, sales, consumer and use taxes required by law, and including utilities and transportation required to complete this project according to all the requirements of the Contract Documents, including all addenda, at and for the price(s) stated below regardless of any increase in wage scales or material prices. The Contractor in submitting its bid guarantees the following prices for Ninety (9) calendar days. TOTAL BASE BID (Base Bid Amount + Bid Additive Alternate No. + Bid Additive Alternate No. ) Dollars Price in Words $ Price in Figures BASE BID AMOUNT (Base Bid Breakdown A + Base Bid Breakdown B) Dollars Price in Words $ Price in Figures //8 (Issued with Addendum ) - Bid Form UPDATED //7 NON-PLA-ISSUED TO AE /8/8 P#

5 JEFFERSON ELEMENTARY SCHOOL SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJECT NO. SAN FRANCISCO UNIFIED SCHOOL DISTRICT BID ADDITIVE ALTERNATES. Bid Additive Alternate No. (Mechanical): Generally described as thermostatic control valves, steam traps, and pipe insulation, including all demolition and hazmat work. Refer to Alternates Section for listing of associated Drawing Sheet numbers. Dollars Price in Words $ Price in Figures. Bid Additive Alternate No. (Plumbing): Generally described as domestic hot water system upgrades and pipe insulation, including all demolition and hazmat work. Refer to Alternates Section for listing of associated Drawing Sheet numbers. Dollars Price in Words $ Price in Figures BASE BID BREAKDOWN: A. Security work (CCTV, Aiphone system, Motion Sensors) $ Price in Figures B. Electrical (Light fixtures and occupancy sensors) $ Price in Figures Acknowledge receipt of Addenda Nos. //8 (Issued with Addendum ) - Bid Form UPDATED //7 NON-PLA-ISSUED TO AE /8/8 P#

6 JEFFERSON ELEMENTARY SCHOOL SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJECT NO. SAN FRANCISCO UNIFIED SCHOOL DISTRICT (Company) (Contractor License Number) (License Expiration date) (Signature of Bidder) (Printed Name) (Title of Bidder) (Bidder s DIR Registration No) (San Francisco Business Tax Certificate Number) (Business Address) If a Corporation, incorporated In the State of: (Telephone Number) (Fax number) By (Officer) (Printed name) (Title) END OF SECTION //8 (Issued with Addendum ) - Bid Form UPDATED //7 NON-PLA-ISSUED TO AE /8/8 P#

7 JEFFERSON ELEMENTARY SCHOOL SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJECT NO. SAN FRANCISCO UNIFIED SCHOOL DISTRICT SECTION ALTERNATES PART - GENERAL. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division Specification Sections, apply to this Section.. SUMMARY A. This Section includes administrative and procedural requirements for alternates.. DEFINITIONS A. Alternate: An amount proposed by bidders and stated on the Bid Form for certain work defined in the Bidding Requirements that may be added to or deducted from the Base Bid amount if District decides to accept a corresponding change either in the amount of construction to be completed or in the products, materials, equipment, systems, or installation methods described in the Contract Documents.. The cost or credit for each alternate is the net addition to or deduction from the Contract Sum to incorporate alternate into the Work. No other adjustments are made to the Contract Sum.. PROCEDURES A. Coordination: Modify or adjust affected adjacent work as necessary to completely integrate work of the alternate into Project.. Include as part of each alternate, miscellaneous devices, accessory objects, and similar items incidental to or required for a complete installation whether or not indicated as part of alternate.. Include as part of each alternate cost of related coordination, modification, or adjustment that may be required. B. Notification: Immediately following award of the Contract, notify each party involved, in writing, of the status of each alternate. Indicate if alternates have been accepted, rejected, or deferred for later consideration. Include a complete description of negotiated modifications to alternates. April, 8 - Alternates UPDATED --6

8 JEFFERSON ELEMENTARY SCHOOL SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJECT NO. SAN FRANCISCO UNIFIED SCHOOL DISTRICT C. Execute accepted alternates under the same conditions as other work of the Contract. D. Schedule: A Schedule of Alternates is included at the end of this Section. Specification Sections referenced in schedule contain requirements for materials necessary to achieve the work described under each alternate. PART - PRODUCTS (Not Used) PART - EXECUTION. SCHEDULE OF ALTERNATES A. Bid Additive Alternate No. Description of Mechanical Work indicated on Drawing Sheet G., and generally described as: thermostatic control valves, steam traps, and pipe insulation, including all demolition and hazmat work, as shown on Mechanical drawing sheets: M. M.D M.D M.D M. M. M. M. B. Bid Additive Alternate No. Description of Plumbing Work indicated on Drawing Sheet G., and generally described as: domestic hot water system upgrades and pipe insulation, including all demolition and hazmat work, as shown on Plumbing drawing sheets: P. P.D P. END OF SECTION April, 8 - Alternates UPDATED --6

9 Downlighting Project: Location: Cat.No: Calculite LED gen 7" round downlight, - 6lm Calculite LED 7" generation features industry leading visual comfort, excellent uniform illumination over time, and patented installation flexibility. Complete luminaire = Frame + Engine + Trim + Accessories (optional) Type: Lamps: Notes: Qty: Frame example: C7RN Series Aperture Installation Voltage / Options C7 R C7 Calculite LED 7" aperture R Round N New construction R Remodeler Universal V/77 V (specify for Power Over Ethernet configurations) 7 V (not compatible with ELV dimming) EM Emergency, LC Chicago Plenum Engine example: C6L8NZU Series Lumens CRI CCT Beam Dimming Voltage C6L C6L Calculite LED 6" & 7" aperture lm lm lm lm lm 8 8 lm 6 6 lm 8 8 CRI 9 9 CRI 7 7 K K K K N Narrow ( ) M Medium ( ) W Wide (7 ) Z - V % U Universal SOL EldoLED Solo - V.% /77/7 V D Dali L Lutron LDE EcoSystem (fade-to-black) E ELV (V dimming only) Universal V/77 V P Power over Ethernet E Ethernet 8 V DC Only compatible with () to () lumen configurations. Trim example: C7RDLNMCCP Series Aperture Style Beam Finish Flange C7 R DL C7 Calculite LED 7" aperture R Round DL Downlight NM Narrow/ Medium W Wide BK CL Black (matte) Specular clear CC CD CZ Comfort clear Comfort clear diffuse Champagne bronze White (matte) P Polished F Flangeless WH White (matte) White (matte) F Flangeless Beam options Accessories Trim Narrow/ Medium Narrow engine (. s.c.) Wide (.6 s.c.) Medium engine (.7 s.c.) 9 (. s.c.) Wide engine 9 (.9 s.c.) 69 (. s.c.) CA7RFT CAEM AMS SWZDT Mud-in ring for use with flangeless installations (ordered with a flangeless trim) Field installable EM pack ActiLume multi-sensor (optional accessory for Power Over Ethernet configurations) SpaceWise wireless controller with dwell time functionality, compatible with all -V configurations (for details see "SWZDT" spec sheet). Emergency (EM) and Chicago Plenum (LC) options are only available with New construction (N) installations.. Emergency (EM) frame comes with emergency battery pack and ceiling mountable test switch. Reflector mounted test switch requires above ceiling access. For reflector mounted test switch, order emergency frame and add "EM" suffix to reflector (example: C7RDLCCEM).. The 8lm (8) and 6lm (6) are only available with -V (Z) dimming CalculiteLEDgen_7in_Downlight_C7RDL /8 page of 7 and have marked spacing requirements (see page ).. See Beam Options table to the left for light engine and trim combination spacing criterion.. ELV (E) dimming is only compatible with up to lm () configurations.

10 C7RDL Calculite LED generation 7" round downlight New Construction (N) 7 8 in mm 9 in mm Chicago Plenum (LC) 8 in 9 mm 7 8 in 6 mm in 7 mm in 7 mm in 67 mm in 67 mm in 9 mm in mm 8 in mm 8 in in mm 8 mm in 8 mm in 7 mm in 7 mm in 7 mm 9 in 9 mm 9 in 9 mm ø7 8 in 89 mm ø8 8 in 9 mm Ceiling Cutout ø7 7 8 in 98 mm in 7 mm Maximum ceiling thickness CA6RFT Retrofit 8 8 in (max) 66 mm CA7RFT Flangeless mud-in ring (CA7RFT) accessory in 7 mm 8 in 6 mm in (max) mm D 6 8 in 6 mm 6 in 6 mm in mm D 7 in 97 mm in mm 9 in 9 mm in 7 mm in 9 mm Detail D Detail D Consult factory for wood installation instructions. in 7 mm 8 in mm in 7 mm CA6SFT 9 in 9 mm ø7 Ceiling D Cutout 8 in ø mm in 6 mm CalculiteLEDgen_7in_Downlight_C7RDL /8 page 6 of 8 in 7 ø8 8 in 8 in mm 67 mm 9 mm Detail D

11 C7RDL Calculite LED generation 7" round downlight 8 in 9 mm Narrow Input volts Input freq Input current Drive current Input power LED power THD power Power factor Light engine C6L_NZU V.8 <% >.9 /6Hz ma 9W 8W 77V. <% >.9 C6L_NZU V. <% >.9 /6Hz ma W W 77V. <% >.9 C6L_NZU V.6 <% >.9 /6Hz 6 ma W 6W 77V.8 <% >.9 C6L_NZU V. <% >.9 /6Hz 9 ma W W 77V. <% >.9 C6L_NZU V. <% >.9 /6Hz 9 ma 6W W 77V. <% >.9 C6L8_NZU V. <% >.9 /6Hz ma W W 77V.9 <% >.9 C6L6_NZU V.8 <% >.9 /6Hz ma 7W W 77V. <% >.9 Medium/Wide Input volts Input freq Input current Drive current Input power LED power THD power Power factor Light engine C6L_MZU V.8 <% >.9 /6Hz ma 9W 8W 77V. <% >.9 C6L_MZU V. <% >.9 /6Hz ma W W 77V. <% >.9 C6L_MZU V. <% >.9 /6Hz ma 9W W in 77V.7 <% 7 >.9 mm C6L_MZU V.9 <% >.9 /6Hz ma W 9W 77V.9 <% >.9 C6L_MZU V. <% >.9 /6Hz 7 ma W W 77V. <% >.9 C6L8_MZU V.6 <% >.9 /6Hz 8 ma W W 77V.6 <% >.9 C6L6_MZU V. <% >.9 /6Hz ma in 7W W 77V. mm <% > in 6 mm in 7 mm Narrow (Power over Ethernet) Medium (Power over Ethernet) Wide (Power over Ethernet) Input Light engine Volts Voltage Freq Current Power C6L NPE V -V DC 6 ma 8.9 W C6L NPE V -V DC ma.7 W C6L NPE V -V DC ma 7.7 W C6L NPE V -V DC ma.8 W. Nominal input volts.. Preferred volt range. Marked spacing applications Light engine 8 lm 6 lm C6L_ZU series X X C6L_LU series C6L_DU series Modules marked with an X require marked spacing: - Center-to-center of adjacent luminaires: " (6mm) - Luminaire center to side building member: " (mm) Input Input Light engine Volts Voltage Freq Current Power Light engine Volts Voltage Freq Current Power C6L MPE V -V DC 6 ma 8. W C6L WPE V -V DC 6 ma 8. W C6L MPE V -V DC ma. W C6L WPE V -V DC ma. W C6L MPE V -V DC ma 6.7 W C6L WPE V -V DC ma 6.7 W C6L MPE V -V DC 9 ma. W C6L WPE Maxium V Ceiling -V DC 9 ma. W Thickness Lensed Wall Wash (LW): in mm Wall Wash (WW, DW, CW): in 7mm Lifetime (TM-) data Lumens Narrow beam Medium/Wide beam* lm lm lm lm 6,hrs. 6,hrs. lm* 8lm 6lm 6,hrs. 6,hrs. * Lutron lm with Medium/Wide beam is 6,hrs. CalculiteLEDgen_7in_Downlight_C7RDL /8 page of 7

12 C7RDL Calculite LED generation 7" round downlight Frame-in-kits New Construction Galvanized stamped steel for dry or plaster ceilings. Preinstalled telescoping mounting bars from -/" to ". For ' distances, use /" EMT, -/" x /" U or C channel. Max ceiling thickness is -/". Minimum ceiling thickness is /8". Patented install Mounting frame With no driver attached, this versatile frame is independent of driver accommodating a wide range of lumen packages, driver types and CCTs, including V and 77V inputs. Pre-installed mounting bars allow for fast and tool-less installation into T-grid and hat channel ceilings. Close-cut aperture design eliminates the possibility of undesired gap between ceiling opening and reflector flange. Separate wiring compartment for wiring frame to building allows inspection prior to light engine installation. Simple plug-and-play connection between the frame and light engine from below the ceiling eliminates the need for wiring between frame and LED driver, and also saves time during installation and future replacements/upgrades. Plug-and-play receptacle accommodates technology upgrade of light engines and replacements for the life of the building. Drivers - Advance -V % dimming - Lutron Hi-lume EcoSystem H series % dimming - EldoLED ECOdrive Dali % dimming - EldoLED SOLOdrive -V.% dimming - ELV dimming Power over Ethernet Powered via Philips PoE lighting controller: complies with FCC rules per Title 7 part (Class A) for EMI / RFI (conducted & radiated). PoE lighting controller accessible from below ceiling. Rated life: 6, hrs at 7% lumen maintenance based on IES LM-8-8 and TM--. Optical systems Comfort throughout the space: Patented optical system combines primary and secondary optics to provide a true physical cutoff and reflected cutoff virtually eliminating the view of the light source and bright spots in the reflector. A new reflector curve reduces reflector brightness by up to % compared to existing products, allowing for the use of higher lumen packages in smaller apertures without creating bright spots in the ceiling. Quality of light: SDCM ensures color consistency from fixture to fixture and over the luminaire s long lifetime. Proprietary optical grade silicone lens with patterned surface provides soft, even beam diffusion without hotspots or dark rings. Light Engine Quick connect power pack comprised of light source and driver allow for easy installation and replacement from below ceiling with no need for additional wiring. This allows for - Frame and ceiling installation to be performed while still finalizing details such as lumen packages, CCT and control type. - Easy replacement of electronics at end of life with minimal wasted material and labor required. - Ease and upgradability of technology. Options and Accessories Flangeless mud-in ring: Use CA7RFT for use with flangeless installations. Sloped ceilings: Compatible with sloped ceiling adapters (see SCA spec sheet). ENERGY STAR exceptions 9 CRI configurations Champagne Bronze and Black finishes 7V and Emergency configurations Dali & EldoLED Solo dimming Power over Ethernet driver Labels and Listings culus listed for wet location ENERGY STAR CCEA (frames with *LC suffix) IBEW Union made (light engines & reflectors) RoHS compliant Warranty year warranty on complete system. Complete warranty available at: com/is/content/philipsconsumer/pdfdownloads/ United%States/ODLI9_-UPD-en_US- Philips-warranty-indoor-PLS-us.pdf CalculiteLEDgen_7in_Downlight_C7RDL /8 page of 7

13 C7RDL Calculite LED generation 7" round downlight Narrow beam (. s.c.), lm Engine,. lm/w or.9 lm/w at.8w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors 7 Frame: C7RN Engine: C6L8NZU Trim: C7RDLNMCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: lms.9 W 8 min K. Zone Lumens %Luminaire % 98.6% 99.9%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles Beam diameter (ft)*.'.8'.'.'.7' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy:. lm/w Report : F Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = % 8CRI K = % 8CRI K = 9% 8CRI 7K = 9% 9CRI K = 8% 9CRI 7K = % lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Narrow beam (.6 s.c.), lm Engine, 9. lm/w or. lm/w at.8w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors 6 Frame: C7RN Engine: C6L8NZU Trim: C7RDLWCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: 8 lms.9 W 8 min K.6 Zone Lumens %Luminaire % 9.% 99.7%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles Beam diameter (ft)*.'.6'.'.8'.' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy: 9. lm/w Report : F77 Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = % 8CRI K = % 8CRI K = 9% 8CRI 7K = 9% 9CRI K = 8% 9CRI 7K = % lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.77-8: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CalculiteLEDgen_7in_Downlight_C7RDL /8 page of 7

14 C7RDL Calculite LED generation 7" round downlight Medium beam (.7 s.c.), lm Engine, 7.6 lm/w or 7. lm/w at.w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors Frame: C7RN Engine: C6L8MZU Trim: C7RDLNMCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: 6 lms. W 8 min K.7 Zone Lumens %Luminaire % 98.% 99.9%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles Beam diameter (ft)*.'.'.9'.6' 6.' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy: 7.6 lm/w Report : F77 Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = % 8CRI K = % 8CRI K = 97% 8CRI 7K = 87% 9CRI K = 77% 9CRI 7K = 7% lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Medium beam (.9 s.c.), lm Engine,. lm/w or 9. lm/w at.w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors 7 Frame: C7RN Engine: C6L8WZU Trim: C7RDLNMCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: lms. W 8 min K.9 9 Zone Lumens %Luminaire % 96.% 99.9%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles 79 8 Beam diameter (ft)*.'.' 6.' 7.' 8.' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy:. lm/w Report : F7 Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = 7% 8CRI K = % 8CRI K = 99% 8CRI 7K = 9% 9CRI K = 87% 9CRI 7K = 8% lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.77-8: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. CalculiteLEDgen_7in_Downlight_C7RDL /8 page 6 of 7

15 C7RDL Calculite LED generation 7" round downlight Wide beam (. s.c.), lm Engine, 7. lm/w or 6.6 lm/w at.w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors 6 87 Frame: C7RN Engine: C6L8MZU Trim: C7RDLWCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: 9 lms. W 8 min K. 9 Zone Lumens %Luminaire % 9.% 99.8%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles Beam diameter (ft)*.' 6.' 7.' 8.' 9.' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy: 7. lm/w Report : F Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = % 8CRI K = % 8CRI K = 97% 8CRI 7K = 87% 9CRI K = 77% 9CRI 7K = 7% lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Wide beam (. s.c.), lm Engine, 9.7 lm/w or 9. lm/w at.w (Power over Ethernet) Candela Curve Zonal summary Single unit data Adjustment factors 7 7 Frame: C6RN Engine: C6L8MZU Trim: C6RDLCL Output lumens: Input watts : CRI: CCT : Spacing Crit.: Beam Angle: 6 lms. W 8 min K. 69 Zone Lumens %Luminaire % 9.6% 99.8%.% Angle Mean CP Lumens Height to lighted plane ' 6' 7' 8' 9' Initial center beam foot-candles Beam diameter (ft)* 6.' 7.' 8.' 9.6'.8' * Beam diameter is where foot-candles drop to % of maximum. Multiple unit data - RCR Spacing on center ' 6' 7' 8' 9' Initial center beam foot-candles Watts per sq. ft ' x 8' x ' Room, Workplane.' above floor, 8//% Reflectances Efficacy: 9.7 lm/w Report : F7 Finish CCT Lumens CL = % CC = 9% CD = 87% CZ = 6% WH = 87% BK = 7% Coefficients of utilization Ceiling 8% 7% % % % Wall 7 RCR Zonal cavity method - Effective floor reflectance = % Room Cavity Ratio CRI K = % 8CRI K = % 8CRI K = 97% 8CRI 7K = 87% 9CRI K = 77% 9CRI 7K = 7% lm = % 8lm = 9% lm = % lm = % lm = 8% lm = 6% lm = % Correlated Color Temperature within specs as defined in ANSI_NEMA_ANSLG C.77-8: Specifications for the Chromaticity of Solid State Lighting Products.. Tested using absolute photometry as specified in LM79: IESNA Approved Method for the Electrical and Photometric Measurements of Solid-State Lighting Products. 7 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires CalculiteLEDgen_7in_Downlight_C7RDL /8 page 7 of 7 Philips Lighting, North America Corporation Franklin Square Drive, Somerset, NJ 887 Tel Philips Lighting Canada Ltd. 8 Hillmount Rd, Markham, ON, Canada L6C S Tel

16 SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # COVER SHEET Login: MIGUEL MARTINEZ Drawing File:SFU9zG.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9:7: AM G.

17 SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals Login: MIGUEL MARTINEZ Drawing File:SFU9zM.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9::9 AM BID ALTERNATE # BID SET BID ADDENDUM # SYMBOLS ABBREVIATIONS AND GENERAL NOTES M.

18 DEMO EXISTING STEAM TRAP CONNECTED TO THE HEAT EXCHANGER HX DEMO EXISTING STEAM TRAP AND THE PIPING CONNECTING TO THE HEAT EXCHANGER HX-. EXISTING STEAM BOILER TO REMAIN. EXISTING HEAT EXCHANGER HX- TO REMAIN. CONDENSATE RETURN PUMP CRP- TO REMAIN. EXISTING HEAT EXCHANGER HX- TO BE REMOVED UNDER THE PLUMBING CONTRACTOR. DEMO EXISTING BOILER INSULATION. CONTRACTOR SHALL COORDINATE WITH THE SFUD THE PRESENCE OF ASBESTOS. DEMO EXISTING STEAM TRAPS LOCATED IN AUDITORIUM CRAWL SPACE. DEMO EXISTING STEAM TRAPS LOCATED IN FAN ROOM. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL (E) STEAM TRAP AT (E) HEAT EXCHANGER HX- Project Name 7 IRVING STREET SAN FRANCISCO, CA. 9 SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # BASEMENT PLAN - DEMOLITION Login: MIGUEL MARTINEZ Drawing File:SFU9zMD.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9:: AM BASEMENT PLAN - DEMOLITION BID ALTERNATE # M.D

19 A B C DEMO ALL THE CONTROL VALVES FROM THE RADIATORS ON THE FIRST FLOOR. CONTRACTOR AT REMOVE TABLES, SHELVING AND CASEWORK OF THE RADIATORS TO GAIN ACCESS TO THE CONTROL VALVES. DEMO ALL SHOWN PNEUMATIC THERMOSTATS. CAP ALL CONTROL COMPRESSED AIR TUBES. CONTRACTOR SHALL TEST COMPRESSED AIR SYSTEM TO CONFIRM THE ABSCENCE OF LEAKAGE. EXISTING PNEUMATIC THERMOSTAT IN AUDITORIUM TO REMAIN. SFUSD FACILITIES DESIGN & CONSTRUCTION EXISTING DANFOSS THERMOSTAT TO REMAIN. CONTRACTOR SHALL VERIFY THAT EXISTING PNEUMATIC THERMOSTATS ARE CONNECTED TO THE CONVECTOR UNITS. DEMO ALL STEAM TRAPS FROM AUDITORIUM RADIATORS. San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address (E) TYPICAL CLASSROOM THERMOSTAT (E) TYPICAL STEAM TRAP IN AUDITORIUM JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # FIRST FLOOR PLAN - DEMOLITION Login: MIGUEL MARTINEZ Drawing File:SFU9zMD.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9::6 AM FIRST FLOOR PLAN - DEMOLITION BID ALTERNATE # M.D

20 A DEMO ALL THE CONTROL VALVES FROM THE RADIATORS ON THE SECOND FLOOR. B C CONTRACTOR TO REMOVE TABLES, SHELVING AND CASEWORK AT THE RADIATORS TO GAIN ACCESS TO THE CONTROL VALVES. DEMO ALL EXISTING PNEUMATIC THERMOSTATS. CAP ALL CONTROL COMPRESSED AIR TUBES. CONTRACTOR SHALL TEST COMPRESSED AIR SYSTEM TO VERIFY THE ABSCENCE OF LEAKAGE. TRANE MODEL VUV CLASSROOM VENTILATOR UNIT. THERMOSTAT ASSOCIATED WITH THIS UNIT IS SHOWN ON PICTURE NO.. REMOTE THERMOSTAT OF TRANE VENTILATOR UNITS ARE NON FUNCTIONAL. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () DEMO ALL UNIT MOUNTED TERMINAL UNIT CONTROLLERS 'TUC' OF TRANE VENTILATOR UNITS ARE IN BAD CONDITION/DAMAGED/NON FUNCTIONAL. Architect Engineer g&b@gb-eng.com School Name and Address TYPICAL THERMOSTAT TYPICAL TUC TRANE WALL THERMOSTAT JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # SECOND FLOOR PLAN SOUTH - DEMOLITION Login: MIGUEL MARTINEZ Drawing File:SFU9zMD.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9::6 AM SECOND FLOOR PLAN SOUTH - DEMOLITION BID ALTERNATE # M.D

21 INSTALL NEW SPIRAX SARCO B- STREAM TRAP. -/"Ø INLET WITH /8" ORIFICE. (E) CONDENSATE RETURN PUMP CRP-. (E) STEAM BOILER ST-. (E) HEAT EXCHANGER HX- (STEAM TO HEATING & HOT WATER). REPLACE EXISTING STEAM TAP WITH SPIREX SARCO B- OF SIZE TO MATCH EXISTING. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # Login: MIGUEL MARTINEZ Drawing File:SFU9zM.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9:6: AM BASEMENT PLAN - MECHANICAL BID ALTERNATE # BASEMENT PLAN - MECHANICAL M.

22 A B CONTRACTOR TO CLEAN AND REMOVE DUST AND DIRT ACCUMULATED IN RADIATOR FINS. CONTRACTOR TO CLEAN AND REMOVE DUST AND DIRT ACCUMULATED IN RADIATOR FINS. SFUSD INSTALL DANFOSS G RA THERMOSTATIC OPERATOR, WALL MOUNT WITH COMBINED REMOTE MOUNTED SENSOR AND DIAL. CONTRACTOR SHALL CLEAR THE OUTDOOR AIR INTAKE OF THE VENTILATOR UNITS. INSTALL DANFOSS G8 THERMOSTATIC OPERATOR, VALVE MOUNT WITH COMBINED REMOTE MOUNTED SENSOR AND DIAL. FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () INSTALL NEW BELL&GOSSET STEAM TRAPS HOFFMAN SPECIALTY. CONTRACTOR TO VERIFY SIZE AND MOUNT TYPE. Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # FIRST FLOOR PLAN - MECHANICAL Login: MIGUEL MARTINEZ Drawing File:SFU9zM.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9:8: AM FIRST FLOOR PLAN - MECHANICAL BID ALTERNATE # M.

23 A B CONTRACTOR TO VERIFY EXISTING CONDITION OF THE OUTSIDE AIR INTAKES OF THE VERTICAL UNIT VENTILATORS IN CLASSROOMS 6, 8,. CLEAN LOUVERS AND VERIFY DAMPER POSITION TO MEET VENTILATION CODE REQUIREMENTS. CONTRACTOR TO CLEAN AND REMOVE DUST AND DIRT ACCUMULATED IN RADIATOR FINS. TYPICAL ALL. INSTALL DANFOSS G RA THERMOSTATIC OPERATOR, WALL MOUNT WITH COMBINED REMOTE MOUNTED SENSOR AND DIAL. BUILT IN SHELF BLOCKING RADIATOR. MAY REQUIRE SHEET METAL CUTTING TO ACCESS CONTROL VALVE. INSTALL NEW WALL THERMOSTAT COMPATIBLE WITH TRANE VUVE7. TITLE COMPLIANT; FULLY /7 PROGRAMMABLE SCHEDULE WITH SETBACK. INSTALL NEW TITLE COMPLIANT UNIT-MOUNTED TERMINAL UNIT CONTROLLER TUC. CONTRACTOR TO REBALANCE VERTICAL UNIT VENTILATOR UPON COMPLETION OF THE MODIFICATIONS TO MEET THE CRITERIA OF THE FORM MECH--C ON SHEET M. OF THE 6 MEASURE 'A' BOND MODERNIZATION INC. SET. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # SECOND FLOOR PLAN SOUTH - MECHANICAL Login: MIGUEL MARTINEZ Drawing File:SFU9zM.dwg Plotting Date: //8 :7 AM Last saved by: MMARTINEZ Monday, April, 8 9:8:7 AM SECOND FLOOR PLAN SOUTH - MECHANICAL BID ALTERNATE # M.

24 SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # BID ALTERNATE # DETAILS AND SCHEDULES Login: MIGUEL MARTINEZ Drawing File:SFU9zM.dwg Plotting Date: //8 :7 AM Last saved by: MMARTINEZ Monday, April, 8 9:9: AM M.

25 LUMINAIRES MOUNTED AT THE EDGE OF THE PLATFORM DECK. CAP AND REMOVE CIRCUITTING FOR THESE FIXTURES. NO NEW FIXTURES AT THESE LOCATIONS. EXISTING EZ MAX PLUS LTG CONTROL PANEL FOR EXTERIOR LIGHTING CONTROL TO REMAIN. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # SECOND FLOOR PLAN - DEMOLITION Login: MIGUEL MARTINEZ Drawing File:SFU9zED.dwg Plotting Date: //8 :6 AM Last saved by: MMARTINEZ Monday, April, 8 9:6: AM SECOND FLOOR PLAN - DEMOLITION E.D

26 A. CONTRACTOR TO FIELD VERIFY ALL EXISTING EXIT SIGNS LOCATIONS AND REPLACE WITH NEW. PROVIDE ADDITIONAL % ALLOWANCE FOR ANY ADDITIONAL EXIT SIGN NOT SHOWN ON PLANS, TYPICAL. SFUSD MOUNT LUMINAIRES AT THE (E) BACKBOX ALONG THE EDGE OF THE PLATFORM DECK. PROVIDE HIGH BAY TYPE OCCUPANCY SENSOR. SENSOR TO CONTROL BOTH FIXTURE TYPES L6 & L7. EXTEND EXITING CIRCUIT AND CONTROL WIRES TO NEW LIGHTING LOCATION AS REQUIRED. CON TRACTOR TO COMBINE ALL EXISTING EXTERIOR LIGHTING CONTROLS/RELAYS (EXCEPT AUDITORIUM CONTRLS/RELAYS) TO EXISTING EZ MAX CONTROL PANEL. FIELD VERIFY ALL EXISTING CONDITIONS. PROVIDE AND INSTALL ALL DEVICES AND CABLING AS REQUIRED. SET SCHEDULES PER T- REQUIREMENTS (COORDINATE WITH SCHOOL). FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # SECOND FLOOR PLAN - LIGHTING Login: MIGUEL MARTINEZ Drawing File:SFU9zE.dwg Plotting Date: //8 : PM Last saved by: MMARTINEZ Monday, April, 8 9:7: AM SECOND FLOOR PLAN - LIGHTING E.

27 SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # Login: MIGUEL MARTINEZ Drawing File:SFU9zP.dwg Plotting Date: //8 :8 AM Last saved by: MMARTINEZ Monday, April, 8 :: AM BID ALTERNATE # SYMBOLS, ABBREVIATIONS AND GENERAL NOTES P.

28 THE NEW GAS WATER HEATER WILL BE INSTALLED IN PLACE OF THE EXISTING TANK & STEAM HEAT EXCHANGER WATER HEATER. THE CONTRACTOR SHALL DISCONNECT THE WATER HEATER FROM THE FLUE, WATER PIPING AND GAS PIPING WITH CARE. DO NOT DAMAGE THE WATER HEATER. THE WATER HEATER SHALL BE HANDED OVER TO THE SAN FRANCISCO BUILDING AND GROUNDS STAFF AS SOON AS IT HAS BEEN DISCONNECTED. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # Login: MIGUEL MARTINEZ Drawing File:SFU9zPD.dwg Plotting Date: //8 :8 AM Last saved by: MMARTINEZ Monday, April, 8 :6: AM BASEMENT PLAN - DEMOLITION -PLUMBING BID ALTERNATE # BASEMENT PLAN - DEMOLITION -PLUMBING P.D

29 INSTALL THE NEW GAS WATER HEATER IN PLACE OF THE EXISTING TANK & STEAM HEAT EXCHANGER WATER HEATER. EXTEND ALL GAS AND WATER PIPING AS INDICATED. SFUSD FACILITIES DESIGN & CONSTRUCTION San Francisco, California 9 Tel () Fax () Architect Engineer g&b@gb-eng.com School Name and Address JEFFERSON ELEMENTARY SCHOOL 7 IRVING STREET SAN FRANCISCO, CA. 9 Project Name SECURITY AND PROP 9 ENERGY UPGRADES PROJECT SFUSD PROJ. TRACKING #: Approvals -8-8 BID SET --8 BID ADDENDUM # Login: MIGUEL MARTINEZ Drawing File:SFU9zP.dwg Plotting Date: //8 :8 AM Last saved by: MMARTINEZ Monday, April, 8 :6: AM BASEMENT PLAN - PLUMBING BID ALTERNATE # BASEMENT PLAN - PLUMBING P.