Recessed. EvoKit LED Retrofit Kit Gen 4

Transcription

1 Recessed EvoKit Retrofit Kit Gen 4 Project: Location: Cat.No: Type: Lamps: Notes: Qty: Philips EvoKit retrofit kit gen 4 is an energy efficient alternative to traditional linear fluorescent troffers. Not only does it offer energy savings 1, it also helps reduce maintenance costs due to its long lifetime. Simple construction helps decrease the installation time meaning you can have an solution in your ceiling in just minutes. Ordering guide (continued on next page) Product Number 12NC Description Watts 3 Volts Dimming: 0-10V Lumen Maintenance (Hrs.) 2 Approx. Lumens 3 Color Temp. (K) Efficacy Diffusor EvoKit 2x2 P 23L 17W G , Ribbed EvoKit 2x2 P 23L 17W G , Ribbed EvoKit 2x2 P 32L 24W G , Ribbed EvoKit 2x2 P 32L 24W G , Ribbed EvoKit 2x4 P 30L 22W G , Ribbed EvoKit 2x4 P 30L 22W G , Ribbed EvoKit 2x4 P 36L 27W G , Ribbed EvoKit 2x4 P 36L 26W G , Ribbed EvoKit 2x4 P 42L 32W G , Ribbed EvoKit 2x4 P 42L 31W G , Ribbed EvoKit 2x4 P 47L 36W G , Ribbed EvoKit 2x4 P 47L 35W G , Ribbed EvoKit 2x2 P 32L 24W G4 SM , Smooth EvoKit 2x2 P 32L 24W G4 SM , Smooth EvoKit 2x4 P 36L 27W G4 SM , Smooth EvoKit 2x4 P 36L 26W G4 SM , Smooth EvoKit 2x4 P 42L 32W G4 SM , Smooth EvoKit 2x4 P 42L 31W G4 SM , Smooth See footnotes on the last page. EvoKit Gen 4 Spec 01/18 page 1 of 10

2 Ordering guide (continued from previous page) Product Number 12NC Description Watts Volts Driver: 0-10V dimming Lumen Maintenance (Hrs.) 2 Approx. Lumens 3 Color Temp. (K) Efficacy Diffusor EvoKit 2x2 P 23L 17W G , Ribbed EvoKit 2x2 P 32L 24W G , Ribbed EvoKit 2x4 P 36L 26W G , Ribbed EvoKit 2x4 P 42L 31W G , Ribbed EvoKit 2x4 P 47L 34W G , Ribbed Driver: 120V Mark 10 dimming EvoKit 2x2 P 23L 19W MK10 7 G , Ribbed EvoKit 2x2 P 23L 19W MK10 7 G , Ribbed EvoKit 2x2 P 32L 25W MK10 7 G , Ribbed EvoKit 2x2 P 32L 25W MK10 7 G , Ribbed EvoKit 2x4 P 30L 26W MK10 7 G , Ribbed EvoKit 2x4 P 30L 23W MK10 7 G , Ribbed EvoKit 2x4 P 36L 29W MK10 7 G , Ribbed EvoKit 2x4 P 36L 29W MK10 7 G , Ribbed EvoKit 2x4 P 42L 34W MK10 7 G , Ribbed EvoKit 2x4 P 42L 34W MK10 7 G , Ribbed EvoKit 2x4 P 47L 38W MK10 7 G , Ribbed EvoKit 2x4 P 47L 38W MK10 7 G , Ribbed Driver: 277V Mark 10 dimming EvoKit 2x2 P 23L 19W MK10 7 G , Ribbed EvoKit 2x2 P 23L 21W MK10 7 G , Ribbed EvoKit 2x2 P 32L 26W MK10 7 G , Ribbed EvoKit 2x2 P 32L 25W MK10 7 G , Ribbed EvoKit 2x4 P 30L 25W MK10 7 G , Ribbed EvoKit 2x4 P 30L 25W MK10 7 G , Ribbed EvoKit 2x4 P 36L 30W MK10 7 G , Ribbed EvoKit 2x4 P 36L 29W MK10 7 G , Ribbed EvoKit 2x4 P 42L 35W MK10 7 G , Ribbed EvoKit 2x4 P 42L 33W MK10 7 G , Ribbed EvoKit 2x4 P 47L 38W MK10 7 G , Ribbed EvoKit 2x4 P 47L 37W MK10 7 G , Ribbed Dimming: 0-10V at 347V EvoKit 2x2 P 23L 18W G , Ribbed EvoKit 2x2 P 23L 18W G , Ribbed EvoKit 2x2 P 32L 24W G , Ribbed EvoKit 2x2 P 32L 24W G , Ribbed EvoKit 2x4 P 36L 27W G , Ribbed EvoKit 2x4 P 36L 26W G , Ribbed EvoKit 2x4 P 42L 31W G , Ribbed EvoKit 2x4 P 42L 31W G , Ribbed EvoKit 2x4 P 47L 36W G , Ribbed EvoKit 2x4 P 47L 35W G , Ribbed See footnotes on the last page. EvoKit Gen 4 Spec 01/18 page 2 of 10

3 Ordering guide (continued from previous page) Product Number 12NC Description Watts Volts Dimming: SR Lumen Maintenance (Hrs.) 2 Approx. Lumens 3 Color Temp. (K) Efficacy Diffusor EvoKit 2x2 P 32L 25W SR 7 G , Ribbed EvoKit 2x2 P 32L 24W SR 7 G , Ribbed EvoKit 2x4 P 30L 23W SR 7 G , Ribbed EvoKit 2x4 P 30L 23W SR 7 G , Ribbed EvoKit 2x4 P 42L 32W SR 7 G , Ribbed EvoKit 2x4 P 42L 32W SR 7 G , Ribbed EvoKit 2x4 P 47L 36W SR 7 G , Ribbed EvoKit 2x4 P 47L 36W SR 7 G , Ribbed EvoKit 2x4 P 42L 32W SR 7 G4 SM , Smooth EvoKit 2x4 P 42L 32W SR 7 G4 SM , Smooth EvoKit 2x2 P 32L 25W SR 7 G4 SM , Smooth EvoKit 2x2 P 32L 24W SR 7 G4 SM , Smooth EvoKit with Air Return EvoKit 2x2 A 23L 17W G , Ribbed EvoKit 2x2 A 23L 17W G , Ribbed EvoKit 2x2 A 32L 24W G , Ribbed EvoKit 2x2 A 32L 25W SR 7 G , Ribbed EvoKit 2x2 A 32L 24W G , Ribbed EvoKit 2x2 A 32L 24W SR 7 G , Ribbed EvoKit 2x4 A 30L 22W G , Ribbed EvoKit 2x4 A 30L 23W SR 7 G , Ribbed EvoKit 2x4 A 30L 22W G , Ribbed EvoKit 2x4 A 30L 22W SR 7 G , Ribbed EvoKit 2x4 A 36L 27W G , Ribbed EvoKit 2x4 A 36L 26W G , Ribbed EvoKit 2x4 A 42L 31W G , Ribbed EvoKit 2x4 A 42L 32W SR 7 G , Ribbed EvoKit 2x4 A 42L 31W G , Ribbed EvoKit 2x4 A 42L 31W SR 7 G , Ribbed EvoKit 2x4 A 47L 36W G , Ribbed EvoKit 2x4 A 47L 36W SR 7 G , Ribbed EvoKit 2x4 A 47L 35W G , Ribbed EvoKit 2x4 A 47L 35W SR 7 G , Ribbed See footnotes on the last page. EvoKit Gen 4 Spec 01/18 page 3 of 10

4 EvoKit with SpaceWise DT technology Product Number 12NC Description Watts Volts Lumen Maint. (Hrs.) 2 Approx. Lumens 3 Color Temp. (K) Efficacy Diffusor EvoKit 2x2 P 32L 25W SWZDT 7 G , Ribbed EvoKit 2x2 P 32L 24W SWZDT 7 G , Ribbed EvoKit 2x4 P 30L 23W SWZDT 7 G , Ribbed EvoKit 2x4 P 30L 23W SWZDT 7 G , Ribbed EvoKit 2x4 P 42L 32W SWZDT 7 G , Ribbed EvoKit 2x4 P 42L 32W SWZDT 7 G , Ribbed EvoKit 2x4 P 47L 36W SWZDT 7 G , Ribbed EvoKit 2x4 P 47L 36W SWZDT 7 G , Ribbed EvoKit 2x2 A 32L 25W SWZDT 7 G , Ribbed EvoKit 2x2 A 32L 24W SWZDT 7 G , Ribbed EvoKit 2x4 A 30L 23W SWZDT 7 G , Ribbed EvoKit 2x4 A 30L 22W SWZDT 7 G , Ribbed EvoKit 2x4 A 42L 32W SWZDT 7 G , Ribbed EvoKit 2x4 A 42L 31W SWZDT 7 G , Ribbed EvoKit 2x4 A 47L 36W SWZDT 7 G , Ribbed EvoKit 2x4 A 47L 35W SWZDT 7 G , Ribbed See footnotes on page 9. Please refer to Philips.com/Spacewise for more detailed specification sheets as well as a list of compatible wireless dimming switches. Features Occupancy sensing, daylight harvesting and task tuning in one device Granular dimming (occupancy sharing) Dwell time Scene setting Configuration of sensor parameters if desired using NFC or IR via intuitive Android-based Philips field apps Quick task tuning in the field to optimize light and power levels Enables auto-off/manual-on and auto-off/ partial-on application DLC qualified: Listed on the QPL for Networked Lighting Controls Benefits Installation savings - integral wireless controls factory installed. No need to order separate components. Minimal startup and configuration expertise - savings on labor time & effort Deep energy savings & code compliance strategies Faster ROI with attractive payback periods (varies depending on luminiare choices) Applications Conference rooms Individual offices Open offices Classrooms Storage and break areas Restrooms Lobbies New configuration tool Sensor parameters can be configured via Philips field apps. Two versions are available: 1. NFC This app allows configuring sensor parameters only when you can physically access the sensor with a smartphone. 2. IR This app allows configuring sensor parameters plus enables grouping to a wireless switch, which can be done with the IR feature of applicable phones from floor level. You must first register for the app to receive a username and password, then download Philips field apps from the Google Play Store. Refer to the website for registration details: EvoKit Gen 4 Spec 01/18 page 4 of 10

5 Application A highly efficient, visually comfortable, architecturally styled retrofit kit designed to replace recessed linear fluorescent troffers. Unique modular design offers refreshing new look in the ceiling when compared to traditional fluorescent luminaires. Single light bar combined with slanted troffer helps reflect light to reduce glare and provide uniform light distribution making it ideal for applications such as offices, schools, healthcare and retail. Excellent color rendering with a CRI above 80. Extremely high efficacies up to 138 lumens per watt. s are an excellent source for use with controls since dimming or frequent switching does not degrade the performance or life of the source. Designed for use with standard grid (NEMA G ) or Narrow Grid (NEMA NFG ) ceiling T-Grids. High efficiency source and luminaire design help significantly reduce energy consumption and more easily comply with known energy codes. Helps meet regulation requirements such as ASHRAE 90.1 and Title 24 when matched with suitable controls. Construction/Finish Simple design allows for quick installation in existing luminaire without the need to break the ceiling plenum. Constructed using galvanized steel which helps fight rust and makes for more durable product. Integrated ceiling tabs for securement within the ceiling for areas prone to extreme conditions Minimum depth of only 3" necessary to allow proper clearance and installation of the EvoKit. Retrofit kit is powder coated after fabrication with high quality, durable finish to ensure no unfinished edges and avoid future potential of corrosion. Components fit together easily without the need for tools during installation. Electrical Multiple driver options available - Philips Advance Xitanium SR driver allows flexibility to integrate a range of control options V dimming satisfies universal voltage requirements 5-year limited warranty includes all components of the retrofit kit, including driver, board and nonelectrical components. *** Listed with UL and Design Lights Consortium to ensure quality performance and safety standards are met. High efficiency s have a minimum 70,000 hour rated life (L 70 ). Enclosure Diffuser requires no frames or fasteners and can be easily removed from below without tools if needed. Accessories Suitable for use with Philips emergency backup. Suitable for use with a wide range of control systems. Appropriate for new construction when used with standard listed lensed or parabolic troffers. Prod. No. Description EvoKit 2x4 replacement lens ribbed EvoKit 2x4 replacement lens smooth EvoKit 2x2 replacement lens ribbed EvoKit 2x2 replacement lens smooth EvoKit field installed emergency battery backup (requires the use of bracket) EvoKit emergency battery backup bracket (brackets come in packs of 4) EvoKit with new SimpleSet technology for wireless lumen level programming EvoKit with new SimpleSet technology allows the maximum lumen level to be set prior to installation using a smartphone-based app without requiring power to the luminaire. Available in the 0-10V and SR versions only. The app can be downloaded at Google Play. Please contact your Philips representative for the current list of approved Android smartphones. Distributors can set lumen levels prior to shipping, and contractors can set lumen levels prior to installation. Lumen level is quickly and easily set in two steps: Step 1: Place the smartphone next to the NFC antenna on the driver. Step 2: Follow the on-screen instructions. EvoKit Gen 4 Spec 01/18 page 5 of 10

6 EvoKit with air return The air return versions of EvoKit are suitable for retrofitting listed air return troffers. 2x2 air return data Return Air Volume, SCFM Negative Static Pressure, in. H **Noise Criteria (NC) Note: 24 total air slots, each 30mm x 6mm. 2x4 air return data Return Air Volume, SCFM Negative Static Pressure, in. H **Noise Criteria (NC) < Note: 50 total air slots, each 30mm x 6mm. EvoKit Sensor Ready (SR) with Philips Advance Xitanium SR for connected lighting solutions EvoKit SR is a new platform that allows users to choose different control platforms to suit their needs and budget; from simple occupancy and daylight sensing to cloud-connected data-reporting sensing. This empowers users to fine-tune their energy use for reduced energy costs. Various Philips EasySense, SpaceWise and other SR certified controls are available. Please refer to Philips.com/Evokit for details. Contact your Philips representative for a current list of additional approved sensors. Sensors are connected in the field with just a few simple steps: Step 1: Evokit SR is shipped with a plate covering the sensor hole. There are two wires secured to the back of the plate. Step 2: The plate can be removed before or after you install EvoKit SR. Just gently slide the plate to one end and remove. Step 3. Remove the two wires that were secured to the back of the plate. Commercial Product Name Order Code EasySense EVO EasySense EVO EasySense EVO Step 4: Take these two wires and insert them into the sensor. They are not polarity sensitive. Step 5: Insert the sensor back into the hole. The sensor may or may not require a socket. EvoKit Gen 4 Spec 01/18 page 6 of 10

7 Dimensions 2x4 Dimensions 2x2 A Face Plate Length B Face Plate Width C Height 47.83" 23.9" 2.95" A Face Plate Length B Face Plate Width C Height 23.9" 23.9" 2.95" C A C A B B 2'x2' EvoKit, P 23L 17W G4, 2,202 delivered lumens Catalog No x223l S/MH 1.2 Lumens/Watt 131 Input Watts 17 lumens - $1.83 based on 3000 hours and $0.08/kWh Angle End Cross Back 'x2' EvoKit, P 32L 24W G4, 3,062 delivered lumens Catalog No x232l S/MH 1.2 Lumens/Watt 129 Input Watts 24 lumens - $1.86 based on 3000 hours and $0.08/kWh Angle End Cross Back EvoKit Gen 4 Spec 01/18 page 7 of 10

8 2'x4' EvoKit, P 30L 22W G4, 2,758 delivered lumens Catalog No x430l S/MH 1.2 Lumens/Watt 133 Input Watts 21 lumens - $1.80 based on 3000 hours and $0.08/kWh Angle End 45 Cross Back 'x4' EvoKit, P 36L 27W G4, 3,368 delivered lumens Catalog No x436l S/MH 1.3 Lumens/Watt 132 Input Watts 26 lumens - $1.82 based on 3000 hours and $0.08/kWh Angle End 45 Cross Back EvoKit Gen 4 Spec 01/18 page 8 of 10

9 2'x4' EvoKit, P 42L 32W G4, 4,134 delivered lumens Catalog No x442l S/MH 1.3 Lumens/Watt 131 Input Watts 32 lumens - $1.83 based on 3000 hours and $0.08/kWh Angle End 45 Cross Back 'x4' EvoKit, P 47L 36W G4, 4,662 delivered lumens Catalog No x447l S/MH 1.3 Lumens/Watt 131 Input Watts 36 lumens - $1.83 based on 3000 hours and $0.08/kWh Angle End 45 Cross Back EvoKit Gen 4 Spec 01/18 page 9 of 10

10 Energy saving solution EvoKit 2'x4' Estimated lighting costs using a standard 3 lamp T8 troffer Present Wattage 85 W Annual operating hours 4,380 hrs = 372,300 Watt-Hours 1,000 = kwh per year kwh rate of $0.10 = $37.23 per year 125 fixtures $4, annual energy cost per space Estimated lighting costs using a Philips 42L 2x4 Evokit G4 Present Wattage 31 W Annual operating hours 4,380 hrs = 135,780 Watt-Hours 1,000 = kwh per year kwh rate of $0.10 = $13.58 per year 125 fixtures $1, annual energy cost per space Total estimated annual savings $2, Based on 125 fixtures per space operating 4,380 hours a year. 125 fixtures is roughly equivalent to a 10,000 square foot space. kwh rates will vary. FOOTNOTES: 1) Please refer to the energy saving chart above for details. 2) L 70 72, C based on TM21 and LM80. 3) Based on photometric testing consistent with IES LM-79. Actual wattage may differ by +/- 10%. Actual initial lumen output may vary between -10 and +10% of the rated lumens. Made to s0tock product (Contact your Philips sales representative for stock availability and lead time). *** Please visit for full details. Restrictions on Hazardous Substances (RoHS) is a European directive (2002/95/EC) designed to limit the content of 6 substances [lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE)] in electrical and electrical products. For products used in North America, compliance with RoHS is voluntary and self-certified. Evokit luminaires are Design Lights Consortium qualified. Please see the DLC QPL list for exact catalog numbers ( These SKUs do not meet DLC Premium qualification criteria. Evokit luminaires are Design Lights Consortium qualified. Please see the DLC QPL list for exact catalog numbers ( Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/evokit Philips Lighting North America Corporation 200 Franklin Square Drive, Somerset, NJ Tel Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel EvoKit Gen 4 Spec 01/18 page 10 of 10