ProSpex Plus 3.5 Round Wallwash

Transcription

1 Issue Date: September 2017 Fixture/Location Ref: Project Ref: ProSpex Plus 3.5 Round Wallwash The ProSpex Plus 3.5 Round forms part of our architecturally designed range of Trim or Trimless downlights, available in fixed and adjustable variants. The range also includes a Pinhole and lensed Wallwash version, all available for many MR16 sized light sources including Lucent s own LED50 series of modules adjustment for desired effect Linear frosted spread lens for even wall washing Accepts up to 3 media accessories Cutout Ø4 (102mm) Damp location as standard White finish to trim as standard Other colour finishes to special order Family of matching products also available Flanged Plus 3.5 Round Wallwash Flange A090+LED-FG-WW Ceiling kit with overlap flange Wallwash Version Flangeless Plus 3.5 Round Wallwash Flangeless A090+LED-FL-WW Mud-in kit for seamless flush finish Wallwash Version Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 01

2 Photometric Diagrams LED50 ONE GEN , 3000K, 38 Information* LED Type Cree COB Cree COB CCT 2700K 3000K Drive Current 350mA 350mA Power inc Driver 13.8W 13.8W Beam Angle Source Lumens Delivered Lumens Intensisty cd Efficacy lm/w R TM Forward Volt 36V 36V CRI 90 CRI 90 CRI *Data correct at time of publishing LED Module Order Code: Lamp LED50 ONE CCT CRI 2700K CRI 3000K CRI 4000K Beam Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 02

3 Photometric Diagrams LED50 GEN LED50 GEN2, 3000K, 36 Information* LED Type XP-E2 XP-E2 CCT 3000K 3000K Drive Current 350mA 500mA Power inc Driver 10W 14W Beam Angle Source Lumens Delivered Lumens Intensisty cd Efficacy lm/w R TM Forward Volt 27V 27V CRI 80 CRI 80 CRI *Data correct at time of publishing LED Module Order Code: Lamp LED50 GEN2 CCT CRI 2700K CRI 3000K CRI 4000K Beam Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 03

4 Photometric Diagrams LED50 PLUS GEN2 LED50PLUS/ LED50 Plus GEN2, 3000K, 36 Information* LED Type XP-E2 XP-E2 CCT 3000K 3000K Drive Current 350mA 500mA Power inc Driver 10W 14W Beam Angle Source Lumens Delivered Lumens Intensisty cd Efficacy lm/w R TM Forward Volt 27V 27V CRI 90 CRI 90 CRI *Data correct at time of publishing LED Module Order Code: LED50PLUS/2 Lamp LED50PLUS/2 LED50 PLUS GEN2 CCT CRI 2700K CRI 3000K Beam Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 04

5 Fixture Order Code: A090+WW Fixture A090+WW LED -90 Flange FG FL Finish WH BK RAL Plus 3.5 Round Wallwash LED50 GEN2 LED50 GEN2 PLUS LED50 ONE GEN2 Flange Flangeless White Black Special Color Ceiling Thickness 12 1/2 58 5/8 75 3/4 C Custom Location DP Damp Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 05

6 Driver Information Manufacturer Driver Input Voltage Mains Frequency Dimming Range Output Power Efficacy Current Ambient Temp Harvard CLK V VAC 47-63Hz 100%-1% 11-33W 85% mA -25 C - 50 C EldoLED EldoLED DALI VAC 50-60Hz 100%-0% 30W 84% mA -20 C - 50 C EldoLED EldoLED 0-10V VAC 50-60Hz 100%-0% 30W 84% mA -20 C - 50 C Lutron Hi-Lume Phase 120VAC 50-60Hz 100%-1% 2-48W 79% mA -20 C - 50 C Harvard CL Standard VAC 47-63Hz N/A 9-33W 87% mA -25 C - 40 C Lutron Hi-Lume EcoSystem VAC 50-60Hz 100%-1% 2-48W 81% mA -20 C - 50 C Emergency: EM Driver CP05 CP07 CP12 5 Watts 7 Watts 12 Watts CP05: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation VAC, 50/60Hz 2.7 Watts (max) 10-60VDC Class 2 Compliant 0.5A (@10VDC) A (@60VDC) 5 Watts Minutes CP07: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation VAC, 50/60Hz 3.5 Watts (max) 10-60VDC Class 2 Compliant 0.7A (@10VDC) A (@60VDC) 7 Watts Minutes CP12: Input Voltage Input Rating Output Voltage Range Output Current Output Power Power Factor Emergency Operation VAC, 50/60Hz 5.0 Watts (max) 10-60VDC Class 2 Compliant 1.2A (@10VDC) - 0.2A (@60VDC) 12 Watts Minutes Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 06

7 Issue Date: March 2017 LMT (LED50 Range) ProSpex Mounting Tray for Non Insulated Ceiling For Lucent LED50 Range LED Module Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. -90 Housing Description Rigidly constructed Fabricated from steel Adjustable steel hanging bars, adjustment between "/14-24 Includes wiring/junction box All connections accessible through ixture aperture Supplied complete with LED driver Housing Order Code: LMT Lucent Mounting Tray Mounting Tray Size 13" Housing Type NIC Non-Insulated Ceiling Mounting Hardware 09 9 to to 24 LED PLUS Drive Current mA mA Supply Voltage V V Protocol S P LP ESS LHE LED50 GEN2 13" Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron H Series Fade to Black NIC LED50 GEN2 PLUS LED50 ONE GEN2 (350mA MAX ONLY) LED50 ONE SuperSpot LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog Copyright 2014 Lucent Lighting Inc. Tel. New York:

8 Installation Instructions for Plus 3.5 Round Wallwash Flange with Tray For Insulated and Non-Insulated Ceiling type installations Accommodates round trim type fixtures! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Plasterboard installation Cutout (C): Ø4 (102mm) 3. Finish ceiling face 4. Paint and allow to dry fully 5. Align trim kit To Wall marking with wall to be lit and install 6. Power supply dropdown 7. Fixture wiring connection 8. Power supply re-installation 9. Attach safety wire to keyhole. Align fixture with trim ring and Install 10. Finished Installation Fixture Adjustment Instructions 1. Remove fixture from ceiling and unsrew tilt adjustment screws 2. Adjust fixture tilt position from 0 to 10, 20 or 30 and screw tight 3. Replace fixture and ensure alignment with the marker on trim kit Copyright 2014 Lucent Lighting Inc. Tel. New York: Page 07

9 Installation Instructions for Plus 3.5 Round Wallwash Flangeless with Tray For Insulated and Non-Insulated Ceiling type installations Accommodates round trimless type fixtures! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Plasterboard installation Cutout: Ø4 (102mm) 3. Align trimless mud in kit To Wall marking with wall to be lit and install 4. Mud in and allow to dry fully 5. Paint and allow to dry fully 6. Power supply dropdown 7. Fixture wiring connection 8. Power supply re-installation 9. Attach safety wire to keyhole. Align fixture with trimless mud in kit and Install 10. Finished Installation Fixture Adjustment Instructions 1. Remove fixture from ceiling and unsrew tilt adjustment screws 2. Adjust fixture tilt position from 0 to 10, 20 or 30 and screw tight 3. Replace fixture and ensure alignment with the marker on mud in kit Copyright 2014 Lucent Lighting Inc. Tel. New York: Page 08

10 Issue Date: April 2016 LH-6.75 (LED50 Series) ProSpex 6.75 Housing For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. -90 W L L2 Housing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required H L1 W1 H 6.75 Housing Dimensions L L1 L2 W W to Housing Order Code: LH Height /4 Housing Type NIC Non-Insulated Ceiling Mounting Hardware 14 BB CB LED PLUS Drive Current Supply Voltage Protocol S P LP ESS LHE 14 to 24 Butterfly Bracket Caterpillar Bracket 6.75 LED50 GEN2 LED50 GEN2 Plus LED50 One GEN2 (350mA ONLY) LED50 One SuperSpot 350mA 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron H Series Fade to Black NIC LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC Housing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC Housing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc.

11 Issue Date: January 2017 LH-8.50 (LED50 Series) ProSpex 8.50 Housing IC/Airtight, CCEA For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. -90 W L L2 Housing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required H L1 W1 H 8.50 Housing Dimensions L L1 L2 W W to Housing Order Code: LH Height /2 Housing Type IC Insulated Ceiling AT Airtight, CCEA Mounting Hardware 14 BB CB LED PLUS Drive Current Supply Voltage Protocol S P LP ESS LHE 14 to 24 Butterfly Bracket Caterpillar Bracket 8.50 LED50 GEN2 LED50 GEN2 Plus LED50 One GEN2 (350mA ONLY) LED50 One SuperSpot 350mA 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron H Series Fade to Black LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC Housing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC Housing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc. Tel. NewYork:

12 Issue Date: January 2017 LH (LED50 Series) ProSpex Housing IC/Airtight, CCEA For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. -90 W L L2 Housing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required H L1 W1 H Housing Dimensions L L1 L2 W W to Housing Order Code: LH Height /4 Housing Type IC Insulated Ceiling AT Airtight, CCEA Mounting Hardware 14 BB CB LED PLUS Drive Current Supply Voltage Protocol S P LP ESS LHE 14 to 24 Butterfly Bracket Caterpillar Bracket LED50 GEN2 LED50 GEN2 Plus LED50 One GEN2 (350mA ONLY) LED50 One SuperSpot 350mA 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron H Series Fade to Black LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC Housing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC Housing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc. Tel. NewYork:

13 Installation Instructions for Plus 3.5 Round Wallwash Flange with Housing For Insulated and Non-Insulated Ceiling type installations Accommodates round trim type fixtures! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Fine adjustment 3. Plasterboard installation Cutout (C): Ø4 (102mm) 4. Finish ceiling face 5. Paint and allow to dry fully 6. Align trim kit To Wall marking 7. Power supply dropdown 8. Fixture wiring connection with wall to be lit and install 9. Power supply re-installation 10. Attach safety wire to keyhole. 11. Finished Installation Align fixture with trim ring and Install Fixture Adjustment Instructions 1. Remove fixture from ceiling and unsrew tilt adjustment screws 2. Adjust fixture tilt position from 0 to 10, 20 or 30 and screw tight 3. Replace fixture and ensure alignment with the marker on trim kit Copyright 2014 Lucent Lighting Inc. Tel. New York: Page 09

14 Installation Instructions for Plus 3.5 Round Wallwash Flangeless with Housing For Insulated and Non-Insulated Ceiling type installations Accommodates round trimless type fixtures! MAINS POWER TO BE SWITCHED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Fine adjustment 3. Plasterboard installation Cutout: Ø4 (102mm) 4. Align trimless mud in kit To Wall marking with wall to be lit and install 5. Mud in and allow to dry fully 6. Paint and allow to dry fully 7. Power supply dropdown 8. Fixture wiring connection 9. Power supply re-installation 10. Attach safety wire to keyhole. 11. Finished Installation Align fixture with trimless mud in kit and Install Fixture Adjustment Instructions 1. Remove fixture from ceiling and unsrew tilt adjustment screws 2. Adjust fixture tilt position from 0 to 10, 20 or 30 and screw tight 3. Replace fixture and ensure alignment with the marker on mud in kit Copyright 2014 Lucent Lighting Inc. Tel. New York: Page 10