SATA (460mm) / 4-pin Molex (+120mm+120mm) / FDD (+120mm) AC Power Cord (1380mm) - C13 coupler

Transcription

1 DUT RMATION DUT SPECIFICATIONS Brand Corsair Rated Voltage (Vrms) Manufacturer (OEM) HEC Rated Current (Arms) 0-5 Series VS Rated Frequency (Hz) 47-6 Model Number VS450 Rated Power (W) 450 Serial Number Type ATXV DUT tes CP mm Sleeve Bearing Fan Cooling (DSH-) Semi-ive Operation Cable Design Fixed cables POWER SPECIFICATIONS Rail Max. Power.V 5V V -V Amps Watts Total Max. Power (W) 450 CABLES AND CONNECTORS Captive Cables Description Cable Count Connector Count (Total) Gauge In Cable Capacitors ATX connector 0+4 pin (560mm) 8-0AWG 4+4 pin EPSV (60mm) 8AWG 6+ pin PCIe (580mm+0mm) 8AWG SATA (460mm+0mm+0mm) 6 8AWG SATA (460mm) / 4-pin Molex (+0mm+0mm) / FDD (+0mm) // 8-0AWG AC Power Cord (80mm) - C coupler 8AWG - PAGE /8

2 RESULTS Test Date Cybenetics ID # 56 Temperature Range ( C / F) 0- / Average Efficiency 8.74 Efficiency With 0W ( 500W) or % (>500W) Load -5V 55.6 Average Efficiency 79.8 Standby Power Consumption (W) -5V Standby Power Consumption (W) -0V Average PF 0.99 ErP Lot /6 Ready (EU) 67/0 Compliance Avg ise Output.85 Efficiency Rating (ETA) ETA-S ise Rating (LAMBDA) LAMBDA-S++ TEST EQUIPMENT Electronic Loads Chroma 64A x Chroma x4 6A x6 Chroma x 60A x0 60A x AC Sources Chroma 650, Chroma 6604, Keysight AC6804B Power Analyzers N4L PPA50 x, N4L PPA550 Oscilloscopes Picoscope 4444 & 44, Keysight DSOX04A, Rigol DS07A Voltmeter Keithley 05 THD 6.5 Digit Sound Analyzer Bruel & Kjaer 50-L G4 Microphone Bruel & Kjaer Type 4955-A, Bruel & Kjaer Type 489 Data Loggers Picoscope TC-08 x, Labjack U-HV x PAGE /8

3 EFFICIENCY GRAPH This graph depicts the PSU s efficiency throughout its entire operational range. For the generation of the efficiency and noise graphs we set our loaders to auto mode through our custom-made software before trying thousands of possible load combinations NOISE GRAPH The PSU s noise in its entire operational range and under 0- C ambient is depicted in this graph. The X axis represents the load on the +V rail(s) while the Y axis is the load on the minor rails PAGE /8

4 EFFICIENCY -0V (ERP LOT /6 & CEC) Test # 0.045A DC/AC (Watts) Efficiency 0.6 PF/AC Volts A A A A V A V V V A V % 5.09V A V % 5.00V A V % 5.00V A V % 4.999V A V PF/AC Volts 6.59% 5 5.0V Efficiency % 4.967V (Watts) 80.64% 5.000V DC/AC 8.06% 5.00V 0.045A 5.0V % 5.00V 77.70% 5.09V Test # % 5.09V EFFICIENCY -0V (ERP LOT /6 & CEC) 0.7V % 4.965V V VAMPIRE POWER -5V This graph is generated by the PPA Standby Power Analysis software which takes full control of the power analyzer during the whole procedure. This application features all of the EN50564 & IEC60 test limits for standby power software testing. PAGE 4/8

5 EFFICIENCY UNDER HIGH AMBIENT TEMPERATURE The PSU`s efficiency under high ambient temperatures with 5V and 0V input. For this graph the results of the 0-0% load regulation table are used. EFFICIENCY This graph depicts the efficiency levels of the rail with 5V and 0V input. PAGE 5/8

6 0-0% LOAD TESTS Test # V.90A 5V.99A.V.954A.00A DC/AC (Watts) Fan Efficiency (RPM) 76.0%.6V 5.08V.75V 4.995V A.99A.99A.05A %.V 5.009V.66V 4.98V A.488A.4A.409A %.04V 5.07V.59V 4.968V A.979A.97A.64A %.089V 5.07V.5V 4.957V A 4.979A 4.96A.8A %.08V 5.00V.4V 4.94V A 5.987A 5.99A.09A %.07V 5.0V.V 4.99V A 6.99A 6.947A.9A %.059V 5.006V.5V 4.94V A 8.006A 7.96A.45A %.047V 4.997V.6V 4.898V A 8.499A 8.464A.455A %.05V 5.00V.08V 4.889V A 8.996A 9.00A.084A %.99V 5.00V.99V 4.865V A 8.97A 9.0A.089A %.948V 5.06V.9V 4.857V A.000A.000A 0.000A CL %.644V 4.46V.4V 4.969V A.000A.000A.000A CL 8.87% 5.98V.V 4.940V PSU ise Temps PF/AC (db[a]) (In/Out) Volts 5.5 C C 5.9 C C 6.06 C C 6.7 C C 7.6 C C 7.5 C C 8.80 C C 8.90 C C 9.8 C C 9.74 C C 5.0V 40.4 C C 5.0V 7.76 C C 5.05V 9.45 C C V Speed PAGE 6/8

7 0-80W LOAD TESTS Test # V 5V.V.7A 0.489A 0.47A 0.99A DC/AC Efficiency (Watts).75V 5.078V.8V 5.0V A 0.988A 0.97A 0.99A PF/AC Volts %.0V 5.05V.78V 5.0V 5.9.6A.486A.450A 5.004A V.74V 5.004V A.985A.955A 0.80A %.V % 4.995V (db[a]).70v (RPM) % 5.06V PSU ise V Fan Speed RIPPLE MEASUREMENTS Test V 5V.V /Fail 0% Load. mv 6.5 mv 8.7 mv. mv 0% Load.4 mv 7.5 mv 9.6 mv 6.4 mv 0% Load 5.4 mv 8.9 mv 0. mv 5. mv 40% Load 9.0 mv 0.0 mv.0 mv 7.6 mv 50% Load. mv.8 mv.5 mv 8.7 mv 60% Load 4.7 mv 5.9 mv 4.4 mv 9.4 mv 70% Load 5.6 mv 5. mv 5.4 mv 9.7 mv 80% Load 8. mv 6. mv 8.7 mv. mv 90% Load 46. mv 8. mv 0. mv. mv 00% Load 5. mv 9.9 mv.6 mv 5.5 mv 0% Load 58.7 mv.0 mv. mv 6. mv Crossload.6 mv 7.6 mv 7.5 mv 4. mv Crossload 60.7 mv 8. mv 9.0 mv.7 mv PAGE 7/8

8 HOLD-UP TIME & POWER OK SIGNAL (0V) Hold-Up Time (ms) 9.60 AC Loss to PWR_OK Hold Up Time (ms) 5.40 PWR_OK Inactive to DC Loss Delay (ms) 4.0 Top side Power specifications label CERTIFICATIONS PAGE 8/8