LIGHT&GRIP. department

Transcription

1 LIGHT&GRIP department

2 MOVIE PEOPLE S.p.a headquarter registered office Carlo Porta 3 Pontaccio Cologno Monzese (MI) Italy Milan Italy info@moviepeople.it camera@moviepeople.it moviepeople.it D-VISION MOVIE PEOPLE S.r.l R. B. Bandinelli Rome Italy info@d-visionitalia.com d-visionitalia.com MOVIE PEOPLE Bari ex S.S. Km Capurso (BA) Italy tel bari@moviepeople.it

3 GENERAL HIRE CONDITIONS The rental implies acceptance without reservation of our general rental conditions, after having read and signed the contract or delivery note for acceptance or approval. DELIVERY 1 - The equipment taken over by the renter or on his behalf is considered accepted or recognized in perfect condition operation. 2 - The renter must communicate the date of return of the rented equipment and any subsequent and possible change of the same date. 3 - The equipment is delivered to the renter at the MOVIE PEOPLE headquarters, which issues regular delivery note,the copy of the latter will be returned to MOVIE PEOPLE signed by the renter or by those responsible for taking over. 4 - The fee of the equipment start from the day of delivery. 5 - The transport of the equipment is always the responsibility of the renter. RENTAL 6 - The rented equipment can be used in Italy. In case of use abroad the renter agrees to ask the MOVIE PEOPLE a written authorization and the preparation of the related documentation. 7 - The renter,when received the rented equipment, must signed an irrevocable insurance policy against damage, in favour of MOVIE PEOPLE, according to the value indicated by the MOVIE PEOPLE or resulting from the inventory. The insurance must include all risks of transport by car, train, ship, plane and all risks due to damage caused by atmospheric events, accidents, etc., including the loss of the equipment. 8 - In case of loss, deterioration, theft, fire of the equipment, the conductor must notify MOVIE PEOPLE within 24 hours from the moment in whic the event takes place by registered letter. The renter is responsible for the equipment up to the value indicated by the MOVIE PEOPLE or inventory, according to point (7). The MOVIE PEOPLE can request the immediate compensation of the material and the payment of the relative fee at any time. If the tenant has carry out the obligations that precede the indemnity paid or due to MOVIE PEOPLE from insurance, the equipment will be paid or will be sold to the renter himself. 9 - Any failure or breakage of the material during the rental, it will be repaired by MOVIE PEOPLE or from the manufacturer of the equipment and debited to the tenant. The tenant undertakes not to modify, or to have it modified by third parties or not to repair, or to have the rented equipment repaired by third parties, unless otherwise agreed in writing by MOVIE PEOPLE The tenant agrees, remaining responsible for the value of the equipment, the tenant must inform all third party creditors who act for fore closure or other executive or precautionary measure of the rented material, that the material is owned by MOVIE PEOPLE, communicating to it any actions taken by third parties In the case of special equipment rental, the tenant must hire a MOVIE PEOPLE technician to be employed, with functions of consignee, stops any liability of the tenant himself, pursuant to Art of the italian Civil Code The material provided for hire by MOVIE PEOPLE is prepared in accordance with current regulations and the renter who will provide for the installation and connections, also through third parties, must scrupulously observe the safety regulations for what concerns him, assuming all and full criminal responsibility, civil and fiscal. The tenant undertakes, with insurance policy or by responding personally, to refund damages to things or to people, employees or strangers, caused by accidents originating from the rented equipment or its use No discount of fee or reduction of the duration of the rental will be allowed to the renter due to the forced immobilization of the equipment, both for reasons of stoppage of the film, both for production delay, and for any other cause For defects or breakdowns of the rented equipment, even coming from hidden defects, the renter can not expect the pure and simple replacement of the piece and, in case of impossibility to replace without delay, the exchange with equivalent material, without right no conpensation for failure to use the rented property MOVIE PEOPLE assumes no responsibility for delayed deliveries (operating defects or total or partial claims occurring during shooting), or that cause the stop of shooting, being the rental rates independent of the value or the realization of the film produced with the help of the rented equipment. MOVIE PEOPLE excludes any warranty or liability for any direct or indirect damage suffered by the renter or third party, as a result of the inefficient operation of the rented equipment (damage to the equipment, missing or delayed shooting, etc.)

4 GENERAL HIRE CONDITIONS The rental implies acceptance without reservation of our general rental conditions, after having read and signed the contract or delivery note for acceptance or approval. RESTITUTION 16 - The material must be returned in efficient conditions, in order and in perfect condition The material must be returned to the MOVIE PEOPLE headquarters The freight ends on the day of delivery Partial deliveries of parts of the same appliance are not accepted; the rental days will be calculated until full and complete return of the material In the event that the equipment is damaged again, the tenant must pay compensation equivalent to the rental price for the duration of the repair work The material must be returned during the opening hours of the warehouse Any delay in the return of the material is considered as an extension of the rental itself, except for compensation for major damage, pursuant to Art of the italian Civil Code Each item missing when the equipment returns will be replaced by MOVIE PEOPLE and charged to the customer, at the price of the new market in Italy If the return of the rented equipment takes place within 12 hours, it is considered to have ceased on the evening of the previous day. AYMENT 25 - MOVIE PEOPLE S.p.A applies the prices indicated in its price list Payment, unless otherwise indicated, means cash Invoices are issued weekly; we do not accept claims on invoices after 5 days from their issue The exclusive court of jurisdiction is that of Milan In case of use, the tax charges are due to the tenant.

5 GENERAL HIRE CONDITIONS GENERATOR TRUCKS / GENERATORS / VEHICLES / SPECIAL VEHICLES 1 - Requests for vehicles or special vehicles to be hired must be received between 8:30 AM and 6:30 PM on weekdays, even by telephone, but in time for MOVIE PEOPLE to provide it. MOVIE PEOPLE reserves the right to send vehicles and special vehicles to other companies that will provide for these vehicles for direct invoicing in compliance with the contract conditions. MOVIE PEOPLE will be relieved of any responsibility arising from requests that, for technical reasons or for reasons of majeure force, can not be met, will also be relieved of any liability arising from damage or accidental damage that may occur to their vehicles or special vehicles. It will also be relieved of any responsibility for damage caused to third party assets and to third parties in general during filming and / or work. MOVIE PEOPLE is obliged only to replace the vehicle or the special damaged vehicle, as long as this occurs on national territory. 2 - The schedules of our technicians or drivers will be calculated from the time of departure at the time of return to our headquarter. The vehicles and technical means however intend to be anyway to the Production from the moment they leave the MOVIE PEOPLE's garage. Regardless of the actual work program of the Production, the vehicles or special vehicles available will be counted at full fare for 6 days a week, and 50% for Sunday. All vehicles hired with MOVIE PEOPLE's drivers, employees on Sundays or mid-week holidays, will be charged, on the invoice, with a 100% surcharge on the price list. All ancillary costs deriving from the service, such as: motorway tolls, parking spaces, ferries, food and meal reimbursements, will be charged to the production. 3 - All vehicles leased to hire with drivers against Production must be entrusted to staff deemed suitable by MOVIE PEOPLE and regularly registered at the Collocamento Dello Spettacolo. MOVIE PEOPLE reserves the claim to refuse or interrupt the rental, exercising in this case the claim of withdrawal of the contract, a claim that is expressly recognized, if it does not consider the appropriate personnel assigned by the Production, and not replaced with other suitable personnel. The drivers are obliged to comply with all the laws and traffic regulations and to comply with the prescriptions and indications resulting from the Registration Certificate; any charges deriving from infringements committed due to Production requirements will be borne by the same. 4 - All drivers MUST provide to draw up the daily report in order of the vehicle entrusted to them, report diligently completed in its entirety and signed, at the end of the service, daily by the employee in charge of production. 5 - The rental vehicles will have insurance coverage to the legal limits for liability towards third parties, for damages deriving from road traffic. Any compensation in excess of the insurance coverage will be charged to the production. Likewise, in no case responsible for damages suffered by drivers or third parties transported. The Production will provide to prepare a suitable insurance policy to cover the risks of the assets and people traveling on the hired vehicles. 6 - Failure to pay a week's rental will allow MOVIE PEOPLE to terminate the contract, refusing to rent the vehicles or special vehicles for a further period and with immediate obligation to return the same. 7 - In the event of termination of the rental agreement and non-performance of the production or if the MOVIE PEOPLE exercises the claim of withdrawal, the Production will be obliged to immediately return the leased vehicles and technical equipment. In the absence of such redelivery, MOVIE PEOPLE shall have the claim to withdraw the hired vehicles directly and to deliver the assets possibly transported therewith, with express exemption from all liability and with charge for the production of the relative expenses. For the reasons set out above, the Production can not prevent the resumption of the full and exclusive possession of the assets of which, during the rental period, it was mere co-holder, without prejudice in any case, the group in favor of MOVIE PEOPLE. 8 - RENTAL ABROAD - In the hypothesis that the hired vehicles or special vehicles must be used abroad, a 10% surcharge will be applied to the list price. The weekly rental invoices will be filled in with the basic list prices plus 10% and will be paid according to the terms of this contract. Before the start of the vehicles, the Production must provide, in favor of MOVIE PEOPLE, an appropriate fund as an advance on the turnover, to cover the expenses that the MOVIE PEOPLE will have to face. The Production will also provide, during processing, to pay the necessary fuel for the generators; the mileage, any eventual surcharges, will be billed at the moment in which the MOVIE PEOPLE will be in possession of the daily reports. The Production is obliged to set up at its own expense an appropriate INSURANCE policy in favor of MOVIE PEOPLE for an amount equal to the value of the hired vehicle, to guarantee the return of the same in Italy at the end of the rental period. MOVIE PEOPLE is expressly authorized to withdraw from this contract if it does not consider the policy prepared by the Pro duction to be suitable. 9 - All the general conditions of rental form, with the price list and the conditions of the contract, a unique and inseparable context, and with the signing of the contract, approved specifically under Article 1341 C.C. 2 nd subsection. Therefore, failure to fulfill even one of the aforementioned clauses and agreements will result in termination of the contract. 10 -The competent court, for any controversy that may arise in relation to the rental contract, will be that of Milan.

6 Index 7 GENERATOR TRUCKS 16 SPECIAL VEHICLES 31 LIGHTING EQUIPMENT 131 GENERATORS 135 ENGINEERING DEPARTMENT 165 REMOTE HEAD / CRANE / DOLLY 247 GRIP EQUIPMENT 255 FX MACHINES 264 VARIOUS EQUIPMENT 269 EXPANDEBLES

7 GENERATOR TRUCKS 7

8 GENERATOR TRUCKS TWO GENERATORS on chassis FIAT 190/32 Hooklift Size (HxWxL) 3,80x 2,50x10,91 m Generators 2x150 kw GENERATOR on chassis IVECO STRALIS Hooklift + load bank Size (HxWxL) 3,90x2,55x10 m Generators 240 kw GENERATOR on chassis IVECO STRALIS Hooklift + load bank Size (HxWxL) 3,90x2,55x10 m Generators 180 kw GENERATOR on chassis FIAT 190/36 Hooklift + load bank Size (HxWxL) 3,93x2,55x10,46 m Generators 150 kw GENERATOR on chassis FIAT 190/32 Hooklift + load bank Size (HxWxL) 3,93x2,50x10,04 m Generators 150 kw GENERATOR on chassis MAGIRUS 260/43 Hooklift + load bank Size (HxWxL) 3,90x2,55x9,15 m Generators 100 kw GENERATOR on chassis IVECO STRALIS 560 TRAKKER Load bank Size (HxWxL) 3,80x2,55x9,48 m Generators 100 kw 8 GENERATOR TRUCKS

9 GENERATOR TRUCKS GENERATOR on chassis IVECO EUROCARGO 180E/28 Hooklift, compact + load bank Size (HxWxL) 3,75x2,45x7,96 m Generators 80 kw GENERATOR on chassis FIAT EUROCARGO 150E/27 Hooklift, compact + load bank Size (HxWxL) 3,75x2,45x7,89 m Generators 80 kw GENERATOR on chassis FIAT EUROCARGO 180E/28 Hooklift, compact + load bank Size (HxWxL) 3,75x2,55x7,93 m Generators 80 kw GENERATOR on chassis FIAT EUROCARGO 150E/27 Hooklift, compact + load bank Size (HxWxL) 3,75x2,55x7,84 m Generators 50 kw GENERATOR on chassis FIAT EUROCARGO 150E/27 Hooklift, compact + load bank Size (HxWxL) 3,50x2,30x6,44 m Generators 30 kw GENERATOR "BUSO" on chassis IVECO 70C18 Hooklift, compact + load bank Size (HxWxL) 3,40x2,30x6,96 m Generators 20 kw DUMPER-TRUCK Dumper-truck Size (HxWxL) Generators 2,30x6 m 50/100 kw 9 GENERATOR TRUCKS

10 EQUIPMENT ON GENERATOR TRUCKS 240/150 kw Electrician equipment Grip equipment Arri Fresnel 5000 W + barndoor + gels holder Arri Fresnel 2000 W + barndoor + gels holder Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 2x2,5 kw - input mono-phase 32A Dimmer 1x1 kw - input mono-phase 16A Three-phase power cable 100 mm² x 30 m Power box 120 mm² 30 m Power box 50 mm² 30 m Power box 50 mm² 15 m Extension cord mono-phase 63A 20 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Three phase distribution box 250A > 1 x three-phase 125A > 9 x mono-phase 63A > 1 x mono-phase 16A Box Veam - output 3 x mono-phase 63A Cable Veam - output 2 x mono-phase 63A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter three-phase 125A - output 2 x three-phase 63A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Splitter neutral-phase Veam Splitter ground cable Veam Ground cable 35 mm² da 30 m Pole grounding Hammer 1 Flat dolly 80 with swivel + seat + offset arms 1 Elemack round base + seat + counterweight 1 Round plate ø 37 cm Euro mount 1 Triangular bracket + set bazooka risers 7 Trucks 2 m wheelbase 62 cm 1 Trucks 1 m wheelbase 62 cm 10 Tiebrace for tracks 1 Camera riser adapter Offset 24" 1 Set x2 offset Euro mount 1 Offset 60" 1 Trangle platform hight 1 m (scaffolding) 2 Set Apple box 40 Paganini 1 Set of 20 pin clamps 4 Barrel clamps 2 Magic Arms 10 Ropes 8 Bealt ratchet 1 Box of wedges 1 Megaphone 4 Director's chair 10 Sandbags 1x10 kg 1 Camera's counterweight 2 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 1 Ciak 2 Autopole 2,10/3,60 m 2 Autopole 1,50/2,70 m 2 Autopole 1/1,65 m 4 Solid black cloth 4x4 m 1 Solid black cloth 2x2 m 2 Solid white cloth 4x4 m 1 Solid white cloth 2x2 m 1 Artificial silk 4x4 m 1 Artificial silk 2x2 m 1 Single black scrim 4x4 m 1 Single black scrim 2x2 m 1 Single white scrim 4x4 m 1 Single white scrim 2x2 m 2 Rain cover 4x4 m 1 Rain cover 2x2 m 1 Butterfly frame 2x2 m 1 Butterfly frame 4x4 m 1 Butterfly frame 6x6 m + stand mount 1 Camera cheese plate 2 Pulley 1 Broom 36 Carpenter clamps varius size 4 Carpenter clamps 1 m 10 Poly holder (forks) 8 Holder for frame 10 Timber wood 400x7,5x5 cm 2 Timber wood 400x25x5 cm 20 Timber wood 400x5x2,2 cm 1 Fire extinguisher 1 Monitor holder 10 GENERATOR TRUCKS

11 EQUIPMENT ON GENERATOR TRUCKS 100 kw Electrician equipment Arri Fresnel 5000 W + barndoor + gels holder Arri Fresnel 2000 W + barndoor + gels holder Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 2x2,5 kw - input mono-phase 32A Dimmer 1x1 kw - input mono-phase 16A Power box 50 mm² 30 m Power box 50 mm² 15 m Extension cord mono-phase 63A 20 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Three-phase distribution box 250A > 1 x three-phase 125A > 6 x mono-phase 63A > 3 x mono-phase 32A Box Veam - output 3 x mono-phase 63A Cable Veam - output 2 x mono-phase 63A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter three-phase 125A - output 2 x three-phase 63A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Splitter neutral-phase Veam Splitter ground cable Veam Ground cable 35 mm² da 30 m Pole grounding Hammer Grip equipment 1 Flat dolly 80 with swivel + seat + offset arms 1 Elemack round base + seat + counterweight 1 Round plate ø 37 cm with Euro mount 1 Triangular bracket + set bazooka risers 7 Trucks 2 m wheelbase 62 cm 1 Trucks 1 m wheelbase 62 cm 10 Tiebrace for tracks 1 Camera riser adapter Offset 24" 1 Set x2 offset Euro mount 1 Offset 60" 1 Trangle platform hight 1 m (scaffolding) 2 Set Apple box 40 Paganini 1 Set of 20 pin clamps 4 Barrel clamps 2 Magic Arms 10 Ropes 8 Bealt ratchet 1 Box of wedges 1 Megaphone 4 Director's chair 10 Sandbags 1x10 kg 1 Camera's counterweight 2 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 1 Ciak 2 Autopole 2,10/3,60 m 2 Autopole 1,50/2,70 m 2 Autopole 1/1,65 m 4 Solid black cloth 4x4 m 1 Solid black cloth 2x2 m 2 Solid white cloth 4x4 m 1 Solid white cloth 2x2 m 1 Artificial silk 4x4 m 1 Artificial silk 2x2 m 1 Single black scrim 4x4 m 1 Single black scrim 2x2 m 1 Single white scrim 4x4 m 1 Single white scrim 2x2 m 2 Rain cover 4x4 m 1 Rain cover 2x2 m 1 Butterfly frame 2x2 m 1 Butterfly frame 4x4 m 1 Butterfly frame 6x6 m + stand mount 1 Camera cheese plate 2 Pulley 1 Broom 36 Carpenter clamps varius size 4 Carpenter clamps 1 m 10 Poly holder (forks) 8 Holder for frame 10 Timber wood 400x7,5x5 cm 2 Timber wood 400x25x5 cm 20 Timber wood 400x5x2,2 cm 1 Fire extinguisher 1 Monitor holder 11 GENERATOR TRUCKS

12 EQUIPMENT ON GENERATOR TRUCKS 80 kw Electrician equipment Arri Fresnel 5000 W + barndoor + gels holder Arri Fresnel 2000 W + barndoor + gels holder Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 2x2,5 kw - input mono-phase 32A Dimmer 1x1 kw - input mono-phase 16A Power box 50 mm² 30 m Power box 50 mm² 15 m Extension cord mono-phase 63A 20 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Three-phase distribution box 250A > 1 x three-phase 125A > 6 x mono-phase 63A > 3 x mono-phase 32A Box Veam - output 3 x mono-phase 63A Cable Veam - output 2 x mono-phase 63A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter three-phase 125A - output 2 x three-phase 63A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Splitter neutral-phase Veam Splitter ground cable Veam Ground cable 35 mm² da 30 m Pole grounding Hammer Grip equipment 1 Flat dolly 80 with swivel + seat + offset arms 1 Elemack round base + seat + counterweight 1 Round plate ø 37 cm with Euro mount 1 Triangular bracket + set bazooka risers 7 Trucks 2 m wheelbase 62 cm 1 Trucks 1 m wheelbase 62 cm 10 Tiebrace for tracks 1 Camera riser adapter Offset 24" 1 Set x2 offset Euro mount 1 Offset 60" 1 Trangle platform hight 1 m (scaffolding) 2 Set Apple box 30 Paganini 1 Set of 20 pin clamps 4 Barrel clamps 2 Magic Arms 10 Ropes 8 Bealt ratchet 1 Box of wedges 1 Megaphone 4 Director's chair 10 Sandbags 1x10 kg 1 Camera's counterweight 2 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 1 Ciak 2 Autopole 2,10/3,60 m 2 Autopole 1,50/2,70 m 2 Autopole 1/1,65 m 4 Solid black cloth 4x4 m 1 Solid black cloth 2x2 m 2 Solid white cloth 4x4 m 1 Solid white cloth 2x2 m 1 Artificial silk 4x4 m 1 Artificial silk 2x2 m 1 Single black scrim 4x4 m 1 Single black scrim 2x2 m 1 Single white scrim 4x4 m 1 Single white scrim 2x2 m 2 Rain cover 4x4 m 1 Rain cover 2x2 m 1 Butterfly frame 2x2 m 1 Butterfly frame 4x4 m 1 Butterfly frame 6x6 m + stand mount 1 Camera cheese plate 2 Pulley 1 Broom 28 Carpenter clamps varius size 2 Carpenter clamps 1 m 10 Poly holder (forks) 8 Holder for frame 10 Timber wood 400x7,5x5 cm 2 Timber wood 400x25x5 cm 20 Timber wood 400x5x2,2 cm 1 Fire extinguisher 1 Monitor holder 12 GENERATOR TRUCKS

13 EQUIPMENT ON GENERATOR TRUCKS 50 kw Electrician equipment Arri Fresnel 5000 W + barndoor + gels holder Arri Fresnel 2000 W + barndoor + gels holder Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 2x2,5 kw - input mono-phase 32A Dimmer 1x1 kw - input mono-phase 16A Power box 50 mm² 30 m Power box 50 mm² 15 m Extension cord mono-phase 63A 20 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Three-phase distribution box 250A > 1 x three-phase 125A > 6 x mono-phase 63A > 3 x mono-phase 32A Box Veam - output 3 x mono-phase 63A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter three-phase 125A - output 2 x three-phase 63A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Splitter neutral-phase Veam Splitter ground cable Veam Ground cable 35 mm² da 30 m Pole grounding Hammer Grip equipment 1 Flat dolly 80 with swivel + seat + offset arms 1 Elemack round base + seat + counterweight 1 Round plate ø 37 cm with Euro mount 1 Triangular bracket + set bazooka risers 7 Trucks 2 m wheelbase 62 cm 1 Trucks 1 m wheelbase 62 cm 10 Tiebrace for tracks 1 Camera riser Offset 24" 1 Set x2 offset Euro mount 1 Offset 60" 1 Trangle platform hight 1 m (scaffolding) 2 Set Apple box 30 Paganini 1 Set of 20 pin clamps 4 Barrel clamps 2 Magic Arms 10 Ropes 8 Bealt ratchet 1 Box of wedges 1 Megaphone 4 Director's chair 10 Sandbags 1x10 kg 1 Camera's counterweight 2 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 1 Ciak 2 Autopole 2,10/3,60 m 2 Autopole 1,50/2,70 m 2 Autopole 1/1,65 m 4 Solid black cloth 4x4 m 1 Solid black cloth 2x2 m 2 Solid white cloth 4x4 m 1 Solid white cloth 2x2 m 1 Artificial silk 4x4 m 1 Artificial silk 2x2 m 1 Single black scrim 4x4 m 1 Single black scrim 2x2 m 1 Single white scrim 4x4 m 1 Single white scrim 2x2 m 2 Rain cover 4x4 m 1 Rain cover 2x2 m 1 Butterfly frame 2x2 m 1 Butterfly frame 4x4 m 1 Butterfly frame 6x6 m + stand mount 1 Camera cheese plate 2 Pulley 1 Broom 28 Carpenter clamps varius size 2 Carpenter clamps 1 m 10 Poly holder (forks) 8 Holder for frame 10 Timber wood 400x7,5x5 cm 2 Timber wood 400x25x5 cm 20 Timber wood 400x5x2,2 cm 1 Fire extinguisher 1 Monitor holder 13 GENERATOR TRUCKS

14 EQUIPMENT ON GENERATOR TRUCKS 30 kw Electrician equipment Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 650 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 1x1 kw - input mono-phase 16A Extension cord three-phase 63A 30 m Extension cord three-phase 63A 15 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Extension cord mono-phase 16A 5 m Kit 15A composed by - 1 cable 10 m - 1 input 15A - 1 output 15A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Ground cable 30 m Pole grounding Hammer Grip equipment 1 Set Apple box 10 Paganini 1 Set of 20 pin clamps 2 Barrel clamps 2 Magic Arms 4 Ropes 8 Director's chair 1 Sandbags 1x10 kg 1 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 2 Ciak 1 Autopole 2,10/3,60 m 1 Autopole 1,50/2,70 m 1 Autopole 1/1,65 m 2 Solid black cloth 4x4 m 1 Solid white cloth 4x4 m 1 Artificial silk 4x4 m 1 Rain cover 4x4 m 1 Butterfly frame 4x4 m 12 Carpenter clamps varius size 5 Poly holder (forks) 6 Holder for frame 4 Gels holder frame 1x1 1 Monitor holder 30 Tennis balls 4 Timber wood 400x7,5x5 cm 6 Timber wood 400x5x2,2 cm 10 black cardboard 10 white cardboard 14 GENERATOR TRUCKS

15 EQUIPMENT ON GENERATOR TRUCKS 20 kw Electrician equipment Arri Fresnel 1000 W + barndoor + gels holder Arri Fresnel 650 W + barndoor + gels holder Arri Fresnel 300 W + barndoor + gels holder Snoot for Arri Fresnel 300 W Ianiro Varibeam 1000 W + barndoor + safety net Ianiro Varibeam 2000 W + barndoor + safety net Ianiro Photoflood + barndoor + safety net Avenger Wind up stand 29 with braked wheels (B6039X) Avenger Combo steel stand 35 (A1035CS) Avenger Baby stand (1020A) Avenger Steel stand 40 (A0040CS) Avenger Super Steel stand (A0030CS) Set Avenger Conka bonka stand extension (C590) Adapter 16 mm to 28 mm Adapter 28 mm to 16 mm Avenger Turtle base (A2009) Avenger Baby wall plate (F301) Clamp with socket mm Swiveling C Clamp (C150) Avenger Junior offset arm (F100) T bar 16 mm spigot T bar 28 mm spigot Gaffer grip clamp Avenger Pellican gaffer grip (C500) Avenger French fleg with ball and socket arm (I800) Matthews flag 60x100 cm (24x36") Matthews flag 40x60 cm (18x24") Avenger 40" extension arm + grip head (D520L) Dimmer 1x1 kw - input mono-phase 16A Extension cord three-phase 63A 30 m Extension cord three-phase 63A 15 m Extension cord mono-phase 63A 10 m Extension cord mono-phase 32A 20 m Extension cord mono-phase 32A 10 m Extension cord mono-phase 16A 10 m Extension cord mono-phase 16A 20 m Extension cord mono-phase 16A 5 m Kit 15A composed by - 1 cable 10 m - 1 input 15A - 1 output 15A Box 63A - output 2 x mono-phase 32A 2 x mono-phase 16A Box 32A - output 6 x mono-phase 16A Splitter 63A - output 2 x 32A Splitter 32A - output 2 x 16A Splitter 16A - output 2 x 16A Adapter 16A - 15A Adapter 15A - 16A Triple adapter 15A Power strip 5x15A Ground cable 30 m Pole grounding Hammer Grip equipment 1 Set Apple box 10 Paganini 1 Set of 20 pin clamps 2 Barrel clamps 2 Magic Arms 4 Ropes 8 Director's chair 1 Sandbags 1x10 kg 1 Umbrellas 1 Telescopic ladder 3 m 1 Stepladder 2 m 2 Ciak 1 Autopole 2,10/3,60 m 1 Autopole 1,50/2,70 m 1 Autopole 1/1,65 m 2 Solid black cloth 4x4 m 1 Solid white cloth 4x4 m 1 Artificial silk 4x4 m 1 Rain cover 4x4 m 1 Butterfly frame 4x4 m 12 Carpenter clamps varius size 5 Poly holder (forks) 6 Holder for frame 4 Gels holder frame 1x1 1 Monitor holder 30 Tennis balls 4 Timber wood 400x7,5x5 cm 6 Timber wood 400x5x2,2 cm 10 black cardboard 10 white cardboard 15 GENERATOR TRUCKS

16 SPECIAL VEHICLE 16

17 RUSSIAN ARM Russian Arm is a gyro-stabilizzed and remoted arm, it's equipped with the stabilizzed head, Flight Head V. This system is mounted on hight performance vehicle, all this allowing amazing hight-speed shooting. The passenger compartment is provided with five monitor HD, the playback camera is available via Sound Device and it is also possible to communicate with seven radio stations simultaneously. Movie People has set up the system so that it can shoot 24 hours a day without ever stopping to recharge the batteries of the arm. After arriving on the set via our truck, specilaly equipped for the Russian Arm, it's ready to shoot in just 45 minutes. 17 SPECIAL VEHICLES

18 RUSSIAN ARM Data Sheet PAN/ TILT Max. length (optional) Min. length Gyro-Stabilizzed 6 m 4 m PAN capacity 360 PAN speed 20 / 1s TILT capacity +/ 45 TILT speed Type of vehicle Truck's size (HxWxL) 20 / 1s Mercedes-Benz ML 63 AMG 3,99x2,55x12,60 m 18 SPECIAL VEHICLES

19 MINI RUSSIAN ARM Mini Russian Arm is a gyro-stabilizzed and remoted arm. It is as versatile as the Mini Russian Arm, it is proposing an arm of 3,50 m, with a range of 86 This system is equipped with Mini Flight Head, it is more heasy compared to Flight Head 5 but yours shotting will be always precise and stabilized. Unlike the classic Mini Rusian Arm this system does not need to be transported with a truck, but it will be presented on the set as you see it. 19 SPECIAL VEHICLES

20 MINI RUSSIAN ARM Data Sheet PAN/ TILT Min. length Gyro-Stabilized 3,43 m PAN capacity 360 PAN speed 60 / 1s TILT capacity +/ 45 TILT speed Type of vehicle 45 / 1.5 s Porsche Macan S 20 SPECIAL VEHICLES

21 OVERLAND 4x4 Overland 4x4 is a vehicle for special use on which is possible equipped a generator, 50 or 100 kw, and a tank for rainy FX. Overland 4x4 is equipped with a telescopic gru thet arrived to maximum hight of 20 m. Is possible equiped the gru with automated stirrup on witch you can mounted until three Arri Max 18 Data Sheet Payload Max. hight of Gru Truck Truck's size (HxWxL) Generator 50 kw Generator 100 kw Tank for Rain FX 20 m Iveco 140 E28 3,76 x 2,55 x 9,48 m 21 SPECIAL VEHICLES

22 TRUCK VANS CARS TRUCK FIAT 180/ q Load bank 1500 kg Chassis size (HxWxL) 3,77 x 2,50 x 10,45 m Scoop's size (HxWxL) 2,40 x 2,43 x 8 m VAN ISUZU NQR q Load bank 1500 kg Chassis size (HxWxL) 3,30 x 2,30 x 7,18 m Scoop's size (HxWxL) 2,30 x 2,25 x 5,25 m VAN ISUZU NQR q Load bank 1500 kg Chassis size (HxWxL) 3,30 x 2,30 x 6,40 m Scoop's size (HxWxL) 2,30 x 2,25 x 5,25 m VAN IVECO 65C/70-70 q Load bank Chassis size (HxWxL) Scoop's size (HxWxL) 1500 kg 3,00 x 3,30 x 6,96 m 2,18 x 2,20 x 4,44 m VAN FIAT DAILY GRAN VOLUME Chassis size (HxWxL) 3,20 x 2,30 x 6,96 m Scoop's size (HxWxL) 2,25 x 2,15 x 3,55 m VAN FIAT DAILY GRAN VOLUME Chassis size (HxWxL) 3,20 x 2,10 x 5,85 m Scoop's size (HxWxL) 2,40 x 2,43 x 8 m 22 SPECIAL VEHICLES

23 TRUCK VANS CARS VAN MERCEDES-BENZ SPRINTER Chassis size (HxWxL) 2,52 x 1,99 x 6,96 m Scoop's size (HxWxL) 1,90 x 1,77 x 4,30 m VAN MERCEDES-BENZ SPRINTER Chassis size (HxWxL) 2,52 x 1,99 x 5,91 m Scoop's size (HxWxL) 1,90 x 1,77 x 3,18 m VAN IVECO DAILY Chassis size (HxWxL) Scoop's size (HxWxL) 2,71 x 2,01 x 5,96 m 2,16 x 1,75 x 3,60 m VAN IVECO DAILY UNIJET Chassis size (HxWxL) Scoop's size (HxWxL) 2,85 x 2,00 x 5,92 m 2,10 x 1,70 x 3,50 m VAN FIAT DUCATO Chassis size (HxWxL) Scoop's size (HxWxL) 2,20 x 2,02 x 4,70 m 1,80 x 1,65 x1,95 m FIAT FIORINO Chassis size (HxWxL) Scoop's size (HxWxL) 1,90 x 1,72 x 3,86 m 1,20 x 1,40 x145 m 23 SPECIAL VEHICLES

24 TRUCK VANS CARS PICK-UP TOYOTA HI-LUX Chassis size (HxWxL) 1,86 x 1,83 x 5,26 m PICK-UP ISUZU D-MAX Chassis size (HxWxL) 1,73 x 1,83 x 4,91 m MERCEDES VITO (NINE SEATS) Chassis size (HxWxL) 1,84 x 1,88 x 4,65 m MERCEDES CLASSE A Chassis size (WxL) 1,76 x 3,90 m FIAT DOBLÓ Chassis size (HxWxL) Max load 1,83 x 1,90 x 4,40 m 630 kg FIAT 16 Chassis size (WxL) 1,80 x 4,10 m 24 SPECIAL VEHICLES

25 LOW LOADER 3,40 8,10 1,55 0,30 3,50 The measures are in millimeters (mm) 25 SPECIAL VEHICLES

26 CAMERA CAR Movie People's Camera Car is equipped with front or back platform. His load bank allows you to load crane to 4,5-6-9 m. Moreover it is equiped with a video system HI8 and two monitor for driver. 26 SPECIAL VEHICLES

27 MINI LOW LOADER The Movie People's Pneumatic Trail can be adjusted sideways from 2,51 cm to 4,98 cm, the minimum height from the ground is 24 cm. The platform is equipped with mount for lights and camera. 1,91 5,53 3,55 2,51 4,10 The measures are in millimeters (mm) 27 SPECIAL VEHICLES

28 TRAKING DOLLY With Traking Dolly you can moved a vehicle with maximum wheel track of 2,05 m, the maximum height off the ground. 28 SPECIAL VEHICLES

29 QUAD & CAMERA CAR ACCESSORIES POLARIS RANGER EV Size (HxWxL) 1,85 x 1,44 x 2,74 m POLARIS 500 SPORTMAN 6x6 Size (HxWxL) 1,28 x 1,33 x 2,88 m POLARIS 425 4x4 Size (HxWxL) 1,23 x 1,10 x 2,30 m Camera Car Accessories Universal car Camera mount Rig Equipment for camera car ø 50 cm e 32 cm Set suction-cupped Bracket on car door (Sediola) Front bracket (Violino) Suction-cupped ø 30 cm with Camera mount 29 SPECIAL VEHICLES

30 RAINY FX EQUIPMENT MOVIE PEOPLE'S TURBO RAIN Rainy FX Turbo Rain must be mounted on gru at minimum hight 20 m It covers a range of 20 to 30 m. TUNKER ON FIAT EUROCARGO Tank L Spraying equipment Pump L/minutes - 8 atm Side cases for equipment PICK UP WITH TANK L With motor pump WB 15X Capacity 550 l Prevalenza 32 m RAINI FX EQUIPMENT Only with tunker truk Capacity 550 L Hydraulic head 32 m MOTOR PUMP HONDA WH 20X Capacity 550 L Hydraulic head 50 m 30 SPECIAL VEHICLES

31 LIGHTING EQUIPMENT 31

32 LED ARRI SKYPANEL S360-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Swappable Soft Diffusion Panels 1500 W Nominal W Max 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 90 Beam Angle Size (HxWxL) Light Aperture Protection Class Certifications 105º (Half Peak Angle) 41 kg 1237 x 203 x 1331 mm 1280 x 870 mm III / IP20 CE, CB, ENEC, cnrtlus 32 LIGHTING EQUIPMENT

33 LED ARRI SKYPANEL S120-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Soft Diffusion Panels 400 W Nominal W Maximum 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 90 Beam Angle Size (HxWxL) Light Aperture 110 (Half Peak Angle) 16 kg 588 x 133 x 1332 mm 1290 x 300 mm Protection Class IP 20 Certifications CE, CB, ENEC, cnrtlus, FCC, PSE 33 LIGHTING EQUIPMENT

34 LED ARRI SKYPANEL S60-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Soft Diffusion Panels 420 W Nominal W Maximum 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 90 Beam Angle Size (HxWxL) Light Aperture Protection Class Certifications 105º (Half Peak Angle) 11,7 kg 566 x 133 x 825 mm 645 x 300 mm III / IP20 CE, CB, ENEC, cnrtlus, FCC, PSE 34 LIGHTING EQUIPMENT

35 LED ARRI SKYPANEL S30-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Soft Diffusion Panels 200 W Nominal W Maximum 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 90 Beam Angle Size (HxWxL) Light Aperture 110 (Half Peak Angle) 8 kg 499 x 133 x 397 mm 355 x 300 mm Protection Class IP 20 Certifications CE, CB, ENEC, cnrtlus, FCC, PSE 35 LIGHTING EQUIPMENT

36 LED ARRI L10-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Focusable Fresnel 400 W Nominal W Maximum 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 91 Beam Angle Size (HxWxL) Lens Diameter Protection Class Certifications 15º - 50 (Half Peak Angle) 19,7 kg 714 x 502 x 560 mm 274 mm I / IP20 CE, CB, GS, cnrtlus, FCC, PSE 36 LIGHTING EQUIPMENT

37 LED ARRI L7-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Focusable Fresnel 160 W Nominal, 220 W Maximum 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 94 - TLCI Average > 91 Beam Angle Size (HxWxL) Lens Diameter Protection Class Certifications 15º - 50 (Half Peak Angle) 8,2 kg 571 x 374 x 351 mm 175 mm I / IP20 CE, CB, GS, cnrtlus, FCC, PSE 37 LIGHTING EQUIPMENT

38 LED ARRI L5-C Datasheet Optical System Power Consumption Dimmability White Light Colored Light Focusable Fresnel 115 W Nominal 0 to 100 % continuous 2800 to K continuously variable Correlated Color Temperature Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 94 - TLCI Average > 91 Beam Angle Size (HxWxL) Lens Diameter Protection Class Certifications 14º - 50 (Half Peak Angle) 5 kg 394 x 278 x 280 mm 137 mm I / IP20 CE, CB, GS, cnrtlus, FCC, PSE 38 LIGHTING EQUIPMENT

39 LED KINO FLO SELECT 30 Datasheet Optical System Power Consumption Dimmability Color Temperature Colored Light Soft Diffusion Panels 150 W 1 to 100 % continuous 2700 to 6500 K 2500 to 9900 K Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 98 Size (HxWxL) 5 kg 1030 x 270 x 90* mm *(165 mm with barndoors) 39 LIGHTING EQUIPMENT

40 LED KINO FLO CELEB 400Q Datasheet Optical System Power Consumption Dimmability Color Temperature Colored Light Soft Diffusion Panels 210 W 1 to 100 % continuous 2700 to 6500 K 2500 to 9900 K Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 98 Size (HxWxL) 11 kg 130 x 660 x 760 mm 40 LIGHTING EQUIPMENT

41 LED KINO FLO CELEB 400 Datasheet Optical System Power Consumption Dimmability Color Temperature Colored Light Soft Diffusion Panels 198 W 1 to 100 % continuous 2700 to 6500 K 2500 to 9900 K Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 98 Size (HxWxL) 12 kg 360 x 130 x 1145 mm 41 LIGHTING EQUIPMENT

42 LED KINO FLO CELEB 200 Datasheet Optical System Power Consumption Dimmability Color Temperature Colored Light Soft Diffusion Panels 198 W 1 to 100 % continuous 2700 to 6500 K 2500 to 9900 K Full RBG+W Color Gamut with Hue and Saturation Control Color Rendition CRI Average > 95 - TLCI Average > 98 Size (HxWxL) 6,8 kg 357 x 127 x 610 mm 42 LIGHTING EQUIPMENT

43 LED DIGITAL SPUTNIK DIGITAL SPUTNIK DS1 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxD) (Ballast is removable) PAR LED 140 W 0 to 100 % continuous 1500 to K Full RBG+W Color Gamut with Hue and Saturation Control N.D. 1,3 kg 116 x 116 mm DIGITAL SPUTNIK DS6 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Frame Size (HxW) PAR LED on Frame 840 W 0 to 100 % continuous 1500 to K Full RBG+W Color Gamut with Hue and Saturation Control N.D. 15,2 kg 860 x 550 mm 43 LIGHTING EQUIPMENT

44 LED CINEO HS 2 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 500 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 96 TLCI Average > 98 4,9 kg 290 x 96,5 x 532 mm MAVERICK Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 120 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 96 TLCI Average > 98 4,9 kg 168 x 78 x 240 mm 44 LIGHTING EQUIPMENT

45 LED CINEO MATCHBOX Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 13 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 96 TLCI Average > g 82,6 x 38 x 133,4 mm MATCHSTIX Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 3" - 4 W 6" - 6 W 12" - 8 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 96 TLCI Average > 98 3" g 6" g 12" g 3" - 35 x 35 x 76 mm 6" - 35 x 35 x 152 mm 12" - 35 x 35 x 305 mm 45 LIGHTING EQUIPMENT

46 LED LITEPANELS LITEPANELS ASTRA 1x1 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 110 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 95 TLCI Average > 95 3,2 kg 413 x 45 x 134 mm SNAPBAG For Astra 1x1 SNAPGRID 40 For Astra 1x1 46 LIGHTING EQUIPMENT

47 LED LITEPANELS LITEPANELS 1x1 Optical System Power Consumption Dimmability Color Temperature Colored Light Size (HxWxL) Soft Diffusion Panels 40 W 0 to 100 % continuous 3200 to 5600 K NO 1,36 kg 305 x 43 x 305 mm LITEPANELS MICROLED Optical System Power Consumption Dimmability Color Temperature Colored Light Size (HxWxL) Soft Diffusion Panels 3 W 0 to 100 % continuous 5600 K NO 110 g 83 x 38 x 83 mm 47 LIGHTING EQUIPMENT

48 LED VELVET LIGHT VELVET 1 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 75 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 95 TLCI Average > kg 308 x 68 x 370 mm VELVET 2 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 150 W 0 to 100 % continuous 2700 to 6500 K Full RBG+W Color Gamut with Hue and Saturation Control CRI Average > 95 TLCI Average > 95 6 kg 308 x 68 x 670 mm 48 LIGHTING EQUIPMENT

49 FLEXIBLE ROSCO ROSCO SILK 110 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Colored Light Size (HxWxD) Soft Diffusion Panels 100 W 0 to 100 % continuous 2800 to 6500 K NO CRI Average > 98 TLCI Average > 96 NO 4,2 kg 394 x 405 x 99,6 mm ROSCO SILK 120 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Colored Light Size (HxWxD) Soft Diffusion Panels 120 W 0 to 100 % continuous 3000 to 6000 K NO CRI Average > 97 TLCI Average > 97 NO 5,9 kg 339 x 521 x 98 mm ROSCO LITEPAD VECTOR CCT Optical System Soft Diffusion Panels Power Consumption 65 W Dimmability 0 to 100 % continuous Color Temperature 3000 to 6000 K Colored Light NO 2 kg Size (HxWxD) 318 x 469 x 72 mm 49 LIGHTING EQUIPMENT

50 LED AADYNTECH AADYNTECH ECO PUNCH PLUS LED HS Optical System Focusable Fresnel Power Consumption 500 W Dimmability 0 to 100 % continuous Color Temperature 5600 K Colored Light NO 22 kg Size (HxWxD) 515 x 469 x 431,4 mm AADYNTECH JAB DAYLIGHT LED HS Optical System Focusable Fresnel Power Consumption 212 W Dimmability 0 to 100 % continuous Color Temperature 5600 K Colored Light NO 9 kg Size (HxWxD) 554,9 x 326,5 x 339 mm 50 LIGHTING EQUIPMENT

51 VARIOUS LED FOTODIOX PROLED 1024 ASL 1x1 Optical System Soft Diffusion Panels Power Consumption 60 W Dimmability 10 to 100 % continuous Color Temperature 3000 to 6000 K Colored Light NO 6 kg Size (HxWxD) 515 x 469 x 431,4 mm DMG LUMIERE SL1 SWITCH Optical System Soft Diffusion Panels Power Consumption 170 W Dimmability 0 to 100 % continuous Color Temperature 3000 to 6000 K Colored Light NO 3,4 kg Size (HxWxD) 1130 x 200 x 20 mm 51 LIGHTING EQUIPMENT

52 VARIOUS LED ALADDIN A-LITE Optical System Power Consumption Dimmability Color Temperature Size (HxWxD) Camera Light 8 W 5 to 100 % continuous 3000 to 5600 K 205 g 156 x 80 x 1,5 mm ARRI LOCASTER Optical System Power Consumption Dimmability Color Temperature Size (HxWxD) Camera Light 35 W 0 to 100 % continuous 2800 to 5600 K 900 g 218 x 96 x 70 mm Arri Kit Pax LED LiShuai Mini Led (Camera light) LiShuai Micro Led (Camera light) Kit mini plus (Camera light) Rosco Lux Ceelite (Slim panels) Rosco LitePad (Slim panels) LitePanels Ringlite (Ring) Rosco Lite Pad Loop (Ring) Ianiled 54 Ianiled 7 Coemar PAR Lite (LED RGB) Pin Par LED Litegear Ribbon (Lighting adhesive strip) Coemar Striplite 52 LIGHTING EQUIPMENT

53 LED LUPO LUPOLED 560 DMX Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 38 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 95 TLCI Average > 95 1,3 kg 260 x 48 x 350 mm LUPOLED 1120 DMX DUAL COLOR Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxL) Soft Diffusion Panels 38 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 95 TLCI Average > 96 1,4 kg 260 x 48 x 350 mm 53 LIGHTING EQUIPMENT

54 FLEXIBLE LED FOMEX FOMEX FL600 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxL) Flexible Light Panels 60 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 96 TLCI Average > g 300 x 300 mm FOMEX FL1200 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxL) Flexible Light Panels 120 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 96 TLCI Average > g 300 x 580 mm 54 LIGHTING EQUIPMENT

55 FLEXIBLE LED LITEGEAR LITETILE LiteTile+ Plus 8 is the first foldable LED lighting fixture made completely with engineered textiles. LiteTile+ Plus 8 allows the user to install thin, soft, and adjustable Kelvin light into areas previously inaccessible. Because LiteTile+ Plus folds up to 180º between each light engine, the luminaire can be shaped into numerous configurations allowing for 360º, two-sided, or irregularly shaped setups. LiteTile+ Plus 8 can be directly attached to walls or ceiling surfaces such as office drop-ceilings with just spring-clips or tape Datasheet Optical System Power Consumption Dimmability Color Temperature Color Rendition Size (HxWxD) Flexible Light Panels 400 W 0 to 100 % continuous 2600 to 6200 K CRI Average > 95 TLCI Average > 95 1,5 kg 610 x 2337 x 19 mm 55 LIGHTING EQUIPMENT

56 LTP4 LTP2 LTP2L FLEXIBLE LED LITEGEAR LITEMAT + PLUS LTP1 LITEGEAR LITEMAT S2 Optical System Power Consumption Dimmability Color Temperature Color Rendition Size (HxWxD) Flexible Light Panels LTP1-50 W LTP2-100 W LTP2L W LTP4-200 W 0 to 100 % continuous 2600 to 6200 K CRI Average > 95 TLCI Average > 95 LTP1-1,13 kg LTP2-1,72 kg LTP2L - 1,72 LTP4-2,81 kg LTP1-292 x 533 x 23 mm LTP2-533 x 533 x 23 mm LTP2L x 1016 x 23mm LTP4-533 x 1016 x 23 mm ATTENTION! These items are rented separately from each other 56 LIGHTING EQUIPMENT

57 4x4 2x2 2x4 FLEXIBLE LED SOURCHEMAKER 1x2 SOURCHEMAKER BLANKET LED Optical System Power Consumption Dimmability Color Temperature Size (HxWxD) Flexible Light Panels 1x2-53 W 2x2-115 W 2x4-230 W 4x4-460 W 0 to 100 % continuous 2675 to 6010 K 1x2-0,22 kg 2x2-0,45 kg 2x4-0,90 kg 4x4-2 kg 1x2-317x584x25,4 mm 2x2-603x584x25,4 mm 2x4-628x1092x25,4 mm 4x4-1184x1084x23 mm ATTENTION! These items are rented separately from each other 57 LIGHTING EQUIPMENT

58 FLEXIBLE LED ALADDIN BI-FLEX 1 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxD) Flexible Light Panels 50 W 5 to 100 % continuous 2900 to 6400 K NO CRI Average > 97 TLCI Average > g 300 x 300 x 5 mm BRIGHTCAST VARIABLE 15 Optical System Power Consumption Dimmability Color Temperature Colored Light Color Rendition Size (HxWxD) Flexible Light Panels 50 W 0 to 100 % continuous 3200 to 5600 K NO CRI Average > 97 TLCI Average > g 305 x 305 x 08 mm 58 LIGHTING EQUIPMENT

59 LED TUBE ASTERA AX1 AX1 is a powerful pixel controllable LED RGB+W baton that can be mounted at event and film sites to light up people and objects or create indirect lighting effects. A highly creative device that offers an infinite range of possibilities. Datasheet Optical System Power Consumption Control Dimmability Color Light LED Tube Light 28 W/Tube Wireless Range 300 m or DMX NO Full RBG+W Color Rendition CRI Average > 95 Size (HxL) 1 kg/tube 42 x 1035 mm 59 LIGHTING EQUIPMENT

60 Q5 Q10 Q20 LED TUBE Q-LED LAMPS With the Q-LED, the options are endless. From lighting actors to lighting environments, the versatility is only limited by your imagination. Stack lamps into large arrays to form LED panels of tremendous size and proportion. Light backings with unprecedented energy efficiency. String overhead above diffusions for the perfect sky. Retrofit your Kino package to high output, dimmer compatible LED units. No matter the task, Q-LED Linear Lamps are up to the challenge. Datasheet Optical System Power Consumption Control Dimmability Color Temperature LED Tube Light Q5: 5 W Q10: 10 W Q20: 20 W Onboard 100%, 75%, 50%, 25%, 10% OFF A single button press cycles through the dimming levels DAYLIGHT or TUNGSTEN Color Rendition CRI Average > 95 - TLCI Average > 98 Size (L) N.D. Q5: 27 mm Q10: 47 mm Q20: 94 mm 60 LIGHTING EQUIPMENT

61 Q75X Q50X Q25X LED TUBE Q-LED X CROSFADE Light backings with unprecedented energy efficiency. String overhead above diffusions for the perfect sky. Retrofit your Kino package to high output, dimmer compatible LED units. Linear LED Lamp - Q-LED Lamps offer a low profile yet broad lighting source that is capable of providing everything from traditional 3 point subject lighting to architectural accents and general area lighting. Datasheet Optical System Power Consumption Control Dimmability Color Temperature LED Tube Light Q25X: 25 W Q50X: 50 W Q75X: 75 W Onboard 100%, 75%, 50%, 25%, 10% OFF A single button press cycles through the dimming levels DAYLIGHT or TUNGSTEN Color Rendition CRI Average > 95 - TLCI Average > 98 Size (L) MAX 1,30 kg Q25X: 609 mm Q50X: 1220 mm Q75X: 1830 mm 61 LIGHTING EQUIPMENT

62 DAYLIGHT ARRI M SERIES ARRIMAX 12/18 (12000/18000 W) Open Face with Facetted Lamphead Type Reflector W Lamp Type Power Consumption Dimmability Color Temperature Beam Angle Size (HxWxL) UV Glass Diameter HMI W/SE HMI W/SE W / W Yes, % via ARRI Ballast Unit 5600 K (with W lamp) 65,0 kg 1051 x 784 x 942 mm 630 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus ARRIMAX 6/9 (6000/9000 W) Open Face with Facetted Lamphead Type Reflector 9000 W Lamp Type Power Consumption Dimmability Color Temperature Beam Angle Size (HxWxL) UV Glass Diameter HMI 9000 W/SE GX38 HMI 6000 W/SE GX W / 6000W Yes, % via ARRI Ballast Unit 6000 K (with 9000 W lamp) 39,5 kg 947 x 713 x 716 mm 500 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus 62 LIGHTING EQUIPMENT

63 DAYLIGHT ARRI M SERIES ARRIMAX 25/40 (2500/4000 W) Open Face with Facetted Lamphead Type Reflector 4000 W Lamp Type Power Consumption Dimmability Color Temperature Beam Angle Size (HxWxL) UV Glass Diameter HMI 4000W/SE HMI 2500 W/SE 4000 W / 2500 W Yes, % via ARRI Ballast Unit 6000 K (with 4000 W lamp) 19 kg 670 x 402 x 511 mm 300 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRIMAX 18 (1800 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Beam Angle Size (HxWxL) UV Glass Diameter Open Face with Facetted Reflector 1800 W HMI 1800 W/SE HMI 1200 W/SE 1800 W / 1200 W Yes, % via ARRI Ballast Unit 6000 K (with 1800 W lamp) 10,5 kg 567 x 387 x 388 mm 250 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 63 LIGHTING EQUIPMENT

64 DAYLIGHT ARRI M SERIES ARRIMAX 8 (800 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Open Facewith Facetted Reflector 800 W HMI 800W/SE ONLY! 800 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle Size (HxWxL) UV Glass Diameter 7,8 kg (8,7 kg with barndoor) 458 x 344 x 311 mm 200 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl DAYLIGHT ARRISUN ARRISUN 120 (12000 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR W HMI W/SE W Yes, % via ARRI Ballast Unit 6000 K Beam Angle Size (HxWxL) Glass Diameter 46,8 kg 948 x 760 x 850 mm 500 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 64 LIGHTING EQUIPMENT

65 DAYLIGHT ARRISUN ARRISUN 60 (6000 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR 6000 W HMI 6000 W/SE 6000 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 8-40 Size (HxWxL) Glass Diameter 27 kg 872 x 562 x 680 mm 420 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRISUN 40/25 (4000/2500 W) Lamphead Type PAR 4000 W Lamp Type HMI 4000 W/SE HMI 2000 W/SE Power Consumption Dimmability Color Temperature 4000 W / 2500 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 9-49 Size (HxWxL) Glass Diameter 19 kg 723 x 471 x 590 mm 300 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 65 LIGHTING EQUIPMENT

66 DAYLIGHT ARRISUN ARRISUN 18 (1800 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR 1800 W HMI 1800 W/SE HMI 1200 W/SE 1800 W / 1200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 5,5-55 Size (HxWxL) Glass Diameter 10,5 kg 595 x 387 x 416 mm 250 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRISUN 12 (1200 W) Lamphead Type Lamp Type PAR 1200 W HMI 1200 W/SE Power Consumption Dimmability Color Temperature 1200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 5,5-55 Size (HxWxL) Glass Diameter 12,5 kg 415 x 383 x 482 mm 250 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 66 LIGHTING EQUIPMENT

67 DAYLIGHT ARRISUN ARRISUN 5 (575 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR, 575 W HMI 575 W/SE 575 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 9-42 Size (HxWxL) Lens Diameter 3,8 kg 358 x 272 x 310 mm 175 mm Protection Class I/IP 23 Certifications CE ARRISUN 2 (200 W) Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR, 200 W HMI 200 W/SE 200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 9-38 Size (HxWxL) Lens Diameter 2,3 kg 250 x 204 x 267 mm 135 mm Protection Class I/IP 23 Certifications CE 67 LIGHTING EQUIPMENT

68 DAYLIGHT ARRI POCKET PAR POCKET PAR HMI MSR 400 Lamphead Type PAR, 400 W Lamp Type HMI 400 W/SE Power Consumption 400 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 6-69 Size (HxWxL) Lens Diameter 2,6 kg 244 x 237 x 282 mm 125 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl POCKET PAR HMI MSR 200 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature PAR, 200 W HMI 200 W/SE 200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 6-51 Size (HxWxL) Lens Diameter 1,9kg 211 x 225 x 258 mm 105 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 68 LIGHTING EQUIPMENT

69 DAYLIGHT ARRI POCKET PAR POCKET PAR HMI MSR 125 Lamphead Type PAR, 125 W Lamp Type HMI 125 W/SE Power Consumption 125 W Dimmability Yes, % via ARRI Ballast Unit Cable Options Color Temperature Binder 6000 K Beam Angle 6-66 Size (HxWxL) Lens Diameter 1,1 kg 143 x 126 x 190 mm 77 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl POCKET PAR HMI MSR 21/50 Lamphead Type PAR Lamp Type HID 21 W Reflector Power Consumption 50 W Color Temperature 6000 K Lens Diameter 50 mm Protection Class I/IP 22 Certifications CE Lighting data 21 W - Distance 3 m 50 W - Distance 3 m Super Spot 4200 lux at lux at 7 Narrow Flood 2000 lux at lux at 9 Flood 700 lux at lux at 21 Super Flood 150 lux at lux at 52 Frosted Fresnel 200 lux at lux at LIGHTING EQUIPMENT

70 DAYLIGHT ARRI COMPACT ARRI COMPACT W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel W Metal Halide W/SE W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 6-51 Size (HxWxL) Glass Diameter 49 kg 768 x 884 x 813 mm 500 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus ARRI COMPACT 6000 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 6000 W Metal Halide 6000 W/SE 6000 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 6-63 Size (HxWxL) Glass Diameter 35 kg 660 x 682 x 614 mm 420 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus 70 LIGHTING EQUIPMENT

71 DAYLIGHT ARRI COMPACT ARRI COMPACT 4000 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 4000 W Metal Halide 4000 W/SE 4000 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 7-65 Size (HxWxL) Glass Diameter 21,6 kg 543 x 577 x 456 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus ARRI COMPACT 2500 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 2500 W Metal Halide 2500 W/SE 2500 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 7-59 Size (HxWxL) Glass Diameter 16,8 kg 500 x 487 x 387 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus 71 LIGHTING EQUIPMENT

72 DAYLIGHT ARRI COMPACT ARRI COMPACT 1200 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 1200 W Metal Halide 1200 W/SE 1200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 5-51 Size (HxWxL) Glass Diameter 10 kg 385 x 330 x 326 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus ARRI COMPACT 575 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 575 W Metal Halide 575 W/SE 575 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 7-50 Size (HxWxL) Glass Diameter 7,25 kg 314 x 290 x 272 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus 72 LIGHTING EQUIPMENT

73 DAYLIGHT ARRI COMPACT ARRI COMPACT 200 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 200 W Metal Halide 200 W/SE 200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 7-50 Size (HxWxL) Glass Diameter 2,25 kg 232 x 218 x 193 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus ARRI COMPACT 125 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 125 W Metal Halide 125 W/SE 125 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle Size (HxWxL) Glass Diameter 1,8 kg 209 x 202 x 180 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtlus 73 LIGHTING EQUIPMENT

74 DAYLAIGHT DOWNLIGHT 18/12 Data Sheet Lamphead Type Lamp Type Power Consumption Dimmability Correlated Color Temperature Fresnel, W Metal Halide W/DE Metal Halide W/DE W / W Yes, % via ARRI Ballast Unit 6000 K Beam Angle Size (HxWxL) Lens Diameter 69,5 kg 1058 x 1040 x 825 mm 625 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 74 LIGHTING EQUIPMENT

75 DAYLIGHT ARRI FRESNEL ARRI DAYLIGHT FRESNEL 18000/12000 W Lamphead Type Fresnel, 18/12 kw Lamp Type Metal Halide W/DE Metal Halide W/DE Power Consumption Dimmability Color Temperature W / W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 8-60 Product weight Product Size (HxWxL) Lens Diameter 65 kg 880 x 935 x 759 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI DAYLIGHT FRESNEL W Lamphead Type Fresnel, W Lamp Type Metal Halide W/DE Power Consumption W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 7-53 Product weight Product Size (HxWxL) Lens Diameter 60 kg 910 x 790 x 670 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 75 LIGHTING EQUIPMENT

76 DAYLIGHT ARRI FRESNEL ARRI DAYLIGHT FRESNEL 6000 W Lamphead Type Fresnel, 6000 W Lamp Type Metal Halide 6000 W/DE Power Consumption 6000 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 6-53 Product weight Product Size (HxWxL) Lens Diameter 50 kg 880 x 750 x 670 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI DAYLIGHT FRESNEL 4000 W Lamphead Type Fresnel, 4000 W Lamp Type Metal Halide 4000 W/DE Power Consumption 4000 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 8-56 Product weight Product Size (HxWxL) Lens Diameter 42 kg 706 x 525 x 575 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 76 LIGHTING EQUIPMENT

77 DAYLIGHT ARRI FRESNEL ARRI DAYLIGHT FRESNEL 2500 W Lamphead Type Fresnel, 2500 W Lamp Type Metal Halide 2500 W/DE Power Consumption 2500 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 6-58 Product weight Product Size (HxWxL) Lens Diameter 30 kg 718 x 624 x 575 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI DAYLIGHT FRESNEL 1200 W Lamphead Type Fresnel, 1200 W Lamp Type Metal Halide 1200 W/DE Power Consumption 1200 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 8-56 Product weight Product Size (HxWxL) Lens Diameter 16 kg 718 x 624 x 575 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 77 LIGHTING EQUIPMENT

78 DAYLIGHT ARRI FRESNEL ARRI DAYLIGHT FRESNEL 575 W Lamphead Type Fresnel, 575 W Lamp Type Metal Halide 575 W/DE Power Consumption 575 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 6-53 Product weight Product Size (HxWxL) Lens Diameter 8 kg 338 x 624 x 575 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI DAYLIGHT FRESNEL 200 W Lamphead Type Fresnel, 200 W Lamp Type Metal Halide 200 W/DE Power Consumption 200 W Dimmability Yes, % via ARRI Ballast Unit Color Temperature 6000 K Beam Angle 8-56 Product weight Product Size (HxWxL) Lens Diameter 3 kg 230 x 190 x 170 mm N.D. Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 78 LIGHTING EQUIPMENT

79 DAYLIGHT K5600 ALPHA 4K The Alpha 4K s concept is to create a more compact and lighter fixture with interchangeable Fresnel lenses, giving the end user more options than just Flood and Spot. It offers great versatility from Open-Eye (86 ) for extra wide beam with a single hard shadow, to precisely controlled Fresnel from 7 to 65 using the two different Fresnel lenses: Spot or Flood. The reflector is made of a composite of Quartz, which resists high temperatures (1200 C), thanks to the combination of this reflector and the unique air ventilation system of the Alphas, the unit can be operated pointing straight down without damaging any component. Datasheet Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel 4000/2500 W Metal Halide 4000/2500 W/SE 4000/2500 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 8-90 Size (HxWxL) Lens Diameter With lens - 23,6 kg Without lens - 20,4 kg 530 x 580 x 360 mm 350 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl 79 LIGHTING EQUIPMENT

80 DAYLIGHT ARRI X ARRI X HMI MSR 6000 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Flood 6000 W Metal Halide 6000 W/SE 6000 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 128 Size (HxWxL) Glass size 32,2 kg 385 x 810 x 400 mm 175 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI X HMI MSR 2500/4000 W Lamphead Type Flood, 4000 W Lamp Type Metal Halide 4000 W/SE Metal Halide 2500 W/SE Power Consumption Dimmability Color Temperature 4000 W / 2500 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 128 Size (HxWxL) Glass size 21,1 kg Protection Class I/IP 23 Certifications 760 x 590 x 290 mm 385 x 400 mm CE, CB, GS, cnrtl 80 LIGHTING EQUIPMENT

81 HMI ARRI X ARRI X HMI MSR 1200 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Flood, 1200 W Metal Halide 1200 W/SE 1200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 128 Size (HxWxL) Glass size 14,7 kg Protection Class I/IP 23 Certifications 619 x 495 x 260 mm 315 x 330 mm CE, CB, GS, cnrtl ARRI X HMI MSR 575 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Flood, 575 W Metal Halide 575 W/SE 575 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 127 Size (HxWxL) Glass size 8 kg Protection Class I/IP 23 Certifications 500 x 376 x 208 mm 215 x 305 mm CE, CB, GS, cnrtl 81 LIGHTING EQUIPMENT

82 HMI ARRI X ARRI X HMI MSR 200 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Flood, 200 W Metal Halide 200 W/SE 200 W Yes, % via ARRI Ballast Unit 6000 K Beam Angle 128 Size (HxWxL) Glass size 2,5 kg 280 x 244 mm 175 mm Protection Class I/IP 23 Certifications CE, CB, GS, cnrtl ARRI X CERAMIC 250 W Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Size (HxWxL) Glass size Flood, 250 W Metal Halide 200 W/SE 250 W Yes, % via ARRI Ballast Unit 3200 K K 8,20 kg Protection Class I/IP 23 Certifications 590 x 355 x 215 mm 215 x 235 mm CE, CB, GS, cnrtl 82 LIGHTING EQUIPMENT

83 DAYLIGHT DE SISTI GOYA GOYA 6000/12000 W Lamphead Type Lamp Type Power Consumption Open Face Metal Halide W/SE Metal Halide 6000 W/SE W 6000 W Dimmability % Color Temperature Size (HxWxL) 6000 K 42,96 kg 1245 x 840 x 450 mm GOYA 2500/4000 W Lamphead Type Lamp Type Power Consumption Open Face Metal Halide 2500 W/SE Metal Halide 4000 W/SE 2500 W 4000 W Dimmability % Color Temperature Size (HxWxL) 6000 K 13,3 kg 746 x 504 x 305 mm GOYA 400 W Lamphead Type Open Face Lamp Type Metal Halide 400 W/SE Power Consumption 400 W Dimmability % Color Temperature 6000 K 3,31 kg Size (HxWxL) 383 x 237 x 153 mm 83 LIGHTING EQUIPMENT

84 TUNGSTEN ARRI STUDIO T ARRI STUDIO T24 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel, W CP W monoplane W W Yes, % via ARRI Ballast Unit 3200 K Beam Angle Size (HxWxL) Lens Diameter 60,6kg 1068 x 1040 x 830 mm 625 mm Protection Class I/IP 20 Certifications CE, CB, GS, cnrtl ARRI STUDIO T12 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Fresnel, 12000/10000 W CP83 12/10 kw monoplane W W Yes, % via ARRI Ballast Unit 3200 K Beam Angle Product weight Product Size (HxWxL) Lens Diameter 25 kg 48 x 682 x 562 mm 420 mm Protection Class I/IP 20 Certifications CE, CB, GS, cnrtl 84 LIGHTING EQUIPMENT

85 TUNGSTEN ARRI STUDIO ARRI W Lamphead Type Fresnel 5000 W Power Consumption 5000 W Dimmability % Color Temperature 3200 K ARRI W Lamphead Type Fresnel 5000 W Power Consumption 2000 W Dimmability % Color Temperature 3200 K ARRI W Lamphead Type Fresnel, 5000 W Power Consumption 1000 W Dimmability % Color Temperature 3200 K ARRI 650 W Lamphead Type Fresnel, 5000 W Power Consumption 650 W Dimmability % Color Temperature 3200 K ARRI 300 W Lamphead Type Fresnel, 5000 W Power Consumption 300 W Dimmability % Color Temperature 3200 K ARRI 150 W Set 2 pieces Lamphead Type Fresnel, 5000 W Power Consumption 150 W Dimmability % Color Temperature 3200 K 85 LIGHTING EQUIPMENT

86 TUNGSTEN ARRI ARRILITE ARRILITE 750 W PLUS Set 2 pieces Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Open Face with parabolic facetted reflector, 750 W HPL 750 W - GKV 650 W 750 W Yes, % via ARRI Ballast Unit 3200 K Beam Angle Size (HxWxL) Lens Diameter 1,6 kg 226 x 230 x 224 mm 50 mm Protection Class I/IP 20 Certifications CE, CB, GS, cnrtl ARRILITE 650 W PLUS Set 3 pieces Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Open Face with parabolic facetted reflector, 650 W DYR 650 W - DYG 250W 650 W Yes, % via ARRI Ballast Unit 3200 K Beam Angle Size (HxWxL) Lens Diameter 0,9 kg 156 x 175 x 153 mm N.D. Protection Class I/IP 20 Certifications CE, CB, GS, cnrtl 86 LIGHTING EQUIPMENT

87 TUNGSTEN DE SISTI DE SISTI SUPER LEO Lamphead Type Fresnel W Lamp Type N.D. Power Consumption W Dimmability % Color Temperature 3200 K Beam Angle kg Size (HxWxL) 1120 x 230 x 224 mm Lens Diameter 625 mm DE SISTI RENOIR 5000 Lamphead Type Fresnel 5000 W Lamp Type N.D. Power Consumption 5000 W Dimmability % Color Temperature 3200 K 13,93 kg Size (HxWxL) 746 x 327 x 520 mm 87 LIGHTING EQUIPMENT

88 TUNGSTEN ARRI RUBY 7 Datasheet Lamphead Type Lamp Type Power Consumption Color Temperature (INCLUDING LAMPS) Size Diffusion 750 W 7 x PAR W 7000 W 3200 K 25 kg 1200 x 889 x 460 mm Lamp Lux Throw CP 60 Very Spot CP 61 Spot CP 62 Med. Flood ,25 m 28,64 m 40,50 m 20,16 m 28,50 m 40,31m 5,4 m 7,7 m 10,9 m Beam Width 4,1 m 5,8 m 8,2 m 3,9 m 5,5 m 7,8 m 5,4 m 7,7 m 10,9 m Beam Height 3,5 m 5 m 7,1 m 3,2 m 4,5 m 6,3 m 3,2 m 4,6 m 6,4 m 88 LIGHTING EQUIPMENT

89 TUNGSTEN LOWEL LOWEL RIFA ex 88 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Size (FRONT) Size (COLLAPSED) Diffusion 1000 W FEL 1000 W 1000 W NO 3200 K 2 kg 810 x 810 mm 860 mm LOWEL RIFA ex 66 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Size (FRONT) Size (COLLAPSED) Diffusion 750 W FEL 750 W 750 W NO 3200 K 1,6 kg 635 x 635 mm 760 mm LOWEL RIFA ex 44 Lamphead Type Lamp Type Power Consumption Dimmability Color Temperature Size (FRONT) Size (COLLAPSED) Diffusion 300 W FEL 300 W 300 W NO 3200 K 1 kg 400 x 400 mm 530 mm 89 LIGHTING EQUIPMENT

90 TUNGSTEN LINEAR LIGHT PAR 64 5x1000 W F8 8x650 W F4 4x650 W WENDY LIGHT 400 PAR 36 49x650 W PAR 36 12x650 W 90 LIGHTING EQUIPMENT

91 TUNGSTEN PAR 36 8x650 W PAR 36 4x650 W PAR 64 2 lamps + barn doors PAR 64 1 lamp + gels holder 91 LIGHTING EQUIPMENT

92 TUNGSTEN JUMBO 24x1000 W 16x1000 W 9x1000 W AIRCRAFT 16x600 W 8x600 W Bar with 8 lamps PAR 36 W - Spot Case 6 lamps Flood - Medium - Spot (Accessory for JUMBO and/or PAR 64) 92 LIGHTING EQUIPMENT

93 TUNGSTEN Ghost Soft Box 5000 W Ghost Soft Box 1250 W / 1000 W / 625 W Softlight 5000 W Softlight 2500 W Softlight 2000 W Softlight 1000 W Aurasoft* W / 2000 W / 3000 W Aurasoft* W / 4000 W Set Varibeam RedHead 2x 1000 W Varibeam Blonde 2000 W + barn doors + safety net Varibeam RedHead 1000 W + barn doors + safety net Photoflood 500 W + barn doors + safety net Minirama 4x1000 W + gels holder Mini iris 1250 W + gels holder Pallas 1250 W + gels holder Orion 1250 W + gels holder Diluvio 1250 W + gels holder Domino 1000 W + gels holder Totalight 800 W + barndoors Lilliput 300/650 W Set Chinese lanterns Max. 500 W (4 milky white lamps 250 W) Superlucciola Mazzeri 75 W Lucciola Mazzeri 30 W *AuraSoft is also available in DAYLIGHT version Aurasoft W HMI + ballast + cable Aurasoft W HMI + ballast + cable Aurasoft W HMI + ballast + cable 93 LIGHTING EQUIPMENT

94 XENON XENOTEC XENOTECH BRITELIGHT 7K Lamphead Type Xenon Power Consumption 7000 W Color Temperature 5600 K Beam Angle kg Size 635 x 7493 x 8763 mm XENOTECH BRITELIGHT 4K Lamphead Type Xenon Power Consumption 4000 W Color Temperature 5600 K Beam Angle ,6 kg Size (HxWxL) 635 x 7493 x 8763 mm XENOTECH BRITELIGHT 2K Lamphead Type Xenon Power Consumption 2500 W Color Temperature 5600 K Beam Angle ,6 kg Size (HxWxL) 381 x 533 x 609 mm 94 LIGHTING EQUIPMENT

95 FOLLOWSPOT ROBERT JULIAT ROBERT JULIAT ALEX Lamphead Type Lamp Type Power Consumption Color Temperature Followspot CP W Tungsten CP W Tungsten 2000/2500 W 3200 K Beam Angle 7-14,4 Shutter Size (HxWxL) Smooth dimmer shutter 30 kg 450 x 410 x 1190 mm ROBERT JULIAT GINGER Lamphead Type Followspot Lamp Type CP W Tungsen Power Consumption 2500 W Color Temperature 3200 K Beam Angle Shutter Smooth dimmer shutter 29 kg Size (HxWxL) 450 x 410 x 900 mm ROBERT JULIAT 700 SX2 Lamphead Type Profile Spot Lamp Type CP W Tungtsen Power Consumption 2500 W Color Temperature 3200 K Beam Angle Shutter 8 18 kg Size (HxWxL) 525 x 380 x 655 mm 95 LIGHTING EQUIPMENT

96 FOLLOWSPOT Followspots Coemar 2500 W Followspots Coemar Teatro 2000 W Followspots Coemar Teatro 1000 W Followspots Coemar Acuto 2000 W Followspots Coemar Tratto 1000 W Followspots ETC Mini - LED Followspots ETC Zoom Followspots ETC 750 W Followspots ETC 575 W Followspots ETC 200 W Followspots MIP W - Daylight Followspots MIP W - Tungsten Followspots Pani W DEDOLIGHT Dedolight 400 W - Daylight - Projection attachment 185 mm lens Set Dedolight 4x 100 W - Tungsteno - Barndoors - Iris - Filter holder - 16x Imager framing shutter Set Dedolight 3x 150 W - Tungsten - Barndoors - Iris - Filter holder - 12x Imager framing shutter Dedolight 1x 200 W - Tungsteno 96 LIGHTING EQUIPMENT

97 NEON KINO FLO KINO FLO BLANKET LITE Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo F100 16x W DAYLIGHT or TUNGSTEN 32,6 kg 2030 x 2030 x 280 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 97 LIGHTING EQUIPMENT

98 NEON KINO FLO Kino Flo Wall-O-Lite Kino Flo Flathead KINO FLO WALL-O-LITE Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo F55 10x W DAYLIGHT or TUNGSTEN 22,3 kg 768 x 1327 x 197mm KINO FLO FLATHEAD Lamphead Type Lamp Type Bank Flo F75 8x120 Power Consumption 600 Color Temperature Size (HxWxD) DAYLIGHT or TUNGSTEN 12 kg 610 x 1295 x 100 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 98 LIGHTING EQUIPMENT

99 NEON KINO FLO KINO FLO VISTA BEAM 600 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo CFL 6x W DAYLIGHT or TUNGSTEN 21 kg 915 x 955 x 215 mm KINO FLO VISTA BEAM 300 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo CFL 3x W DAYLIGHT or TUNGSTEN 12,9 kg 510 x 955 x 215 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 99 LIGHTING EQUIPMENT

100 NEON KINO FLO KINO FLO DIVA-LITE 400 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo CFL 4x W DAYLIGHT or TUNGSTEN 5,9 kg 305 x 660 x 150 mm KINO FLO DIVA-LITE 200 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo CFL 2x W DAYLIGHT or TUNGSTEN 4,1 kg 1900 x 660 x 90 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 100 LIGHTING EQUIPMENT

101 NEON KINO FLO KINO FLO BARFLY 400 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo QFL 4x W DAYLIGHT or TUNGSTEN 3,3 kg 406 x 476 x 64 mm KINO FLO BARFLY 200 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo QFL 2x W DAYLIGHT or TUNGSTEN 2,2 kg 400 x 245 x 65 mm KINO FLO BARFLY 100 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxD) Bank Flo QFL 1x W DAYLIGHT or TUNGSTEN 1,4 kg 400 x 152 x 65 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 101 LIGHTING EQUIPMENT

102 NEON KINO FLO MEGA DAYLIGHT or TUNGSTEN Power Consumption Bank 4 x 240 F120 Size (HxWxD) Power Consumption Bank 2 x 240 F120 Size (HxWxD) Power Consumption Bank 1 x 240 F120 Size (HxWxD) 480 W 9,8 kg 330 x 2465 x 90 mm 240 W 4,5 kg 190 x 2465 x 90 mm 120 W 3,1 kg 115 x 2465 x 90 mm MEGA DAYLIGHT or TUNGSTEN Power Consumption Bank 4 x 180 F100 Size (HxWxD) Power Consumption Bank 2 x 180 F100 Size (HxWxD) Power Consumption Bank 1 x 180 F100 Size (HxWxD) 400 W 8,3 kg 330 x 1865 x 90 mm 200 W 4,1 kg 190 x 1865 x 90cm 100 W 2,8 kg 115 x 1865 x 90 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 102 LIGHTING EQUIPMENT

103 NEON KINO FLO MEGA DAYLIGHT or TUNGSTEN Power Consumption Bank 4 x 120 F75 Lamps Size (HxWxD) Power Consumption Bank 2 x 120 F75 Lamps Size (HxWxD) Power Consumption Bank 1 x 120 F75 Lamps Size (HxWxD) 300 W N.D. 330 x 1265 x 90 mm 150 W N.D. 190 x 1265 x 90cm 75 W N.D. 115 x 1265 x 90 mm MEGA 60 - DAYLIGHT or TUNGSTEN Power Consumption Bank 4 x 60 F45 Size (HxWxD) Power Consumption Bank 2 x 60 F45 Size (HxWxD) Power Consumption Bank 1 x 60 F45 Size (HxWxD) 180 W N.D. 330 x 665 x 90 mm 90 W N.D. 190 x 665 x 90cm 45 W N.D. 115 x 665 x 90 mm DAYLIGHT lamps are included - TUNGSTEN lamps (Optional) 103 LIGHTING EQUIPMENT

104 NEON Bank Movie Flo 8x36 W - Daylight Bank Movie Flo 8x18 W - Daylight Bank Movie Flo 6x55 W - Daylight Bank Movie Flo 2x36 W - Daylight Bank Movie Flo 2x18 W - Daylight Bank Movie Flo 2x55 W - Daylight Case 10 lamps Movie Flo (1 Daylight / 9 Tungsten) Set Kino Flo Single 40 - Daylight / Tungsten Set Kino Flo Mini 21 - Daylight / Tungsten Set Kino Flo Micro 10 - Daylight / Tungsten Kamio Kino Flo Ring Iris 36-12x36 W Ring Iris 18-12x18 W Case 12 lamps Kino Flo 120 Blue Back Case 12 lamps Kino Flo 120 Breen Back Case 18 lamps Kino Flo Tungsten Case 12 lamps Kino Flo Tungsten Case 8 lamps Kino Flo Tungsten Case 6 lamps Kino Flo Tungsten Case 6 lamps Kino Flo 60 - Tungsten Neon Lamp 1x36 W Neon Lamp 1x18 W Neon Lamp 1x18/36 W Neon Lamp Wood F1x36 W Neon Lamp Wood F1x18 W 104 LIGHTING EQUIPMENT

105 BRIESE LIGHT BRIESE FOCUS 180 Lamphead Type Lamp Type Power Consumption Color Temperature Reflector umbrella SPOT/FLOOD HMI 4000 W/SE 4x 1250 W (Kit H5 Tung.) 4000 W 5000 W DAYLIGHT or TUNGSTEN 3,6 kg Size (FRONT) ø 180 cm Optional Kit H5 TUNGSTENO Eggcrate 50 BRIESE FOCUS 140 Lamphead Type Lamp Type Power Consumption Color Temperature Reflector umbrella SPOT/FLOOD HMI 4000 W/SE 4x 1250 W (Kit H5 Tung.) 4000 W 5000 W DAYLIGHT or TUNGSTEN 3,6 kg Size (FRONT) ø 140 cm Optional Kit H5 TUNGSTENO Eggcrate LIGHTING EQUIPMENT

106 BRIESE LIGHT BRIESE FOCUS 100 Lamphead Type Lamp Type Power Consumption Color Temperature Reflector umbrella SPOT/FLOOD HMI 1200 W/SE 1200 W DAYLIGHT 3,6 kg Size (FRONT) ø 100 cm Optional Eggcrate 50 Dichroic Glass 3200 K BRIESE FOCUS 77 Lamphead Type Lamp Type Power Consumption Color Temperature Reflector umbrella SPOT/FLOOD 1200 W HMI 1200 W DAYLIGHT 3,6 kg Size (FRONT) ø 77 cm Optional Eggcrate 50 Dichroic Glass 3200 K GLOBE W HMI KIT H5 TUNGSTEN EGGCRATE 106 LIGHTING EQUIPMENT

107 K5600 JOKER-BUG 1600 W Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxL) Bug-Lite HMI 1600 CSR/SE 1600 W 5600 K 6,80 kg 279 x 279 x 470 mm JOKER-BUG 800 W Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxL) Bug-Lite HMI 800 CSR/SE 800 W 5600 K 2,72 kg 228 x 228 x 330 mm JOKER-BUG 400 W Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxL) Bug-Lite HMI 400 CSR/SE 400 W 5600 K 2,72 kg 197 x 197 x 267 mm 107 LIGHTING EQUIPMENT

108 K5600 JOKER-BUG 1/2K Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxL) Bug-Lite 1000W CP71 / 2000W CP W / 2000 W 3200 K 2,72 kg 108 x 108 x 305 mm BUG-A-BEAM For JOKER BUG 400/800 SOFTUBE For JOKER BUG 400/800/ LIGHTING EQUIPMENT

109 K5600 SPRING BALL 19 Equipped with lamp 500 W Tungsten SPRING BALL For JOKER BUG 1/2K Optional For JOKER BUG 800/1600 CHIMERA LIGHT BANKS For JOKER BUG 400/800/1600 CHIMERA LANTERN For JOKER BUG 400/800/ CHIMERA OCTAPLUS 3 For JOKER BUG 400 CHIMERA OCTAPLUS 5/7 For JOKER BUG 800/ LIGHTING EQUIPMENT

110 BALLOONS AIRSTARS AIRSTAR HYBRID ELIPSE 18 Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxL) Volume Illuminating balloon inflated with Helium 4 x 2500 W HMI 8 x 1000 W Tungsten W Daylight 8000 W Tungsten 2200 to 5600 K 4300 x 5900 mm 78,5 m³ - HELIUM AIRSTAR HYBRID TUBE 12.8 Lamphead Type Lamp Type Power Consumption Color Temperature Size (ØxL) Volume Illuminating balloon inflated with Helium 4 x 1200 W HMI 8 x 1000 W Tungsten W Daylight W Tungsten 2200 to 5600 K 2500 x 7800 mm 38,5 m³ - HELIUM 110 LIGHTING EQUIPMENT

111 BALLOONS AIRSTARS AIRSTAR LUNIX 200 Lamphead Type Lamp Type Power Consumption Color Temperature Size (Ø) Volume MAX height operation Illuminating balloon inflated with Helium 1 x 4000 W Tung. 1 x 2000 W Tung. 4000/2000 W 3200 K 2000 mm 4,2 m³ - HELIUM 10 m AIRSTAR GAFFAIR Lamphead Type Lamp Type Power Consumption Color Temperature Size (Ø) Illuminating balloon 1 x 1200 W HMI 1200 W 5600 K 2000 mm 111 LIGHTING EQUIPMENT

112 BALLOONS AEROSTATIC BALLOON 4800 HMI Lamphead Type Illuminating balloon inflated with Helium Lamp Type 4 x 1200W HMI Power Consumption 4800 W Color Temperature 5600 K Size (Ø) 3800 mm Volume 30 m³ MAX height operation 15 m AEROSTATIC BALLOON 3200 HMI Lamphead Type Illuminating balloon inflated with Helium Lamp Type 4 x 800W HMI Power Consumption 3200 W Color Temperature 5600 K Size (Ø) 2,50 m Volume 8 m³ MAX height operation 10 m 112 LIGHTING EQUIPMENT

113 SPECIAL LIGHTING LUMINYS 30 KW LABLIGHT The Luminys 30K LabLight is the first mobile high intensity lighting system spceifically designed for testing events requiring exceptional light output for high-speed photography. Luminys' 30K LabLight features a wrap around soft light source filling in shadows and bringing never-before-seen details with fewer, compact high efficiency lights. Datasheet Light Head Lamphead Type Lamp Type Power Consumption Color Temperature Size (HxWxL) Power Supply Input Power Size (HxWxL) High Intensity Lighting System Enhanced Spectrum Long (ESL) W 5400 K 13 kg 660 x 355 x 355 mm 220 VAC, 12 amps (50-60Hz) 122 kg 457 x 457 x 838 mm 113 LIGHTING EQUIPMENT

114 SPECIAL LIGHTING HUNGARO FLASH HUNGARO FLASH T-LIGHT Lamphead Type Flash FX System Lamp Type Xenon Power Consumption W Intensity control 0-100% Flash frequency Adjustable 0-20/24 Hz Color Temperature 6000 K 2 Channel - DMX mode CH1: Freq. - CH2: Intensity Operation - HF mode CH1: Intensity - CH2: Duration 511 DMX starting addresses: Connection type: 5-Pin XLR 17,7 kg Size (HxWxL) 380 x 840 x 250 mm HUNGARO FLASH QUASAR (Waterproof) Lamphead Type Flash FX System Lamp Type Xenon Power Consumption W Continuous Mod W Turbo Mod. Intensity control 0-100% Flash frequency Adjustable 0-20/24 Hz Color Temperature 6000 K 9,6 kg 114 LIGHTING EQUIPMENT

115 SPECIAL LIGHTING GRIVEN GRIVEN KOLORSTREAM Lamphead Type Fresnel Color Change Lamp Type HMI/SE 2500 W Power Consumption 2500 W Color Mix (CYM) Beam Angle Strobe 2.6 Fps DMX Channels: 5 Operation Standalone Master-Slave On-board control Size (HxWxL) 45,5 kg Protection Class IP x 1040 x 825 mm GRIVEN KOLORADO MK Lamphead Type Fresnel Color Change Lamp Type HMI/DE 2500 W Power Consumption 2500 W Color Mix (CYM) Strobe 2.6 Fps DMX Channels: 5 Operation Standalone Master-Slave On-board control Size (HxWxD) 45,5 kg Protection Class IP x 620 x 623 mm 115 LIGHTING EQUIPMENT

116 SPECIAL LIGHTING MARTIN MAC 600 Lamphead Type Automated Light Lamp Type MSR 575/2 Power Consumption 575 W Color Mix CYM variable % Color Wheel 4 filters (incl. CTC) + open, full and split positions Mechanical Dimmer 0-100% Shutter Strobe effect up to 8 Hz random strobe Beamshaper 0-90 / Diffuser Variable frost filter PAN/TILT 440 / 306 Size (HxWxL) 31,5 kg 652 x 481 x 356 mm MARTIN MAC 500 Lamphead Type Automated Light Lamp Type MSR 575/2 Power Consumption 690 W Color Mix CYM variable % Color Wheel N.D. Mechanical Dimmer 0-100% Shutter Beamshaper Diffuser N.D. N.D. N.D. PAN/TILT 440 / 306 Size (HxWxL) 32,8 kg 673 x 481 x 356 mm 116 LIGHTING EQUIPMENT

117 SPECIAL LIGHTING MARTIN MAC 150 WASH Lamphead Type Automated Light Lamp Type MSR 152 Power Consumption 150 W Color Mix CYM variable % Color Wheel 12 colors + open, continuous rotation Mechanical Dimmer 0-100% Shutter Strobe effect up to 11.4 Hz random strobe Beamshaper Fixed PAN/TILT 540 / ,6 kg Size (HxWxL) 415 x 316 x 390 mm ROSCO iwash LED Lamphead Type Automated Light Lamp Type LED Color Mix RGB+W Strobo Elettronic, synchronized, random, pulse effect PAN/TILT 538 / ,2 kg Size (HxWxL) 470 x 350 x 335 mm ROSCO X24 EFFECT Lamphead Type Automated Light Lamp Type HMI 200 W Power Consumption 200 W Color Mix CYM variable % PAN/TILT NO 8,21 kg Size (HxWxL) 180 x 305 x 355 mm 117 LIGHTING EQUIPMENT

118 BALLAST ARRI HS BALLAST ARRI HIGH SPEED 6000/9000 W 1000 Hz Lamp Power 6000 W / 9000 W constant control Line Power VA (max.) Supply Voltage V~ 50/60 Hz 1, N, PE Nominal Current A Current Characteristic Dimming 27 kg Dimensions (HxWxD) Protective Rate IP 22 Square wave, ca Hz in Flicker Free 1000 Hz Range % of nominal lamp power 358 x 263 x 450 mm BALLAST ARRI HIGH SPEED 2500/4000 W 1000 Hz Lamp Power 2500 W / 4000 W constant control Line Power 4650 VA (max.) Supply Voltage V / V~ 50/60 Hz 1, N, PE Nominal Current Current Characteristic Dimming Dimensions (HxWxD) A / A - Square wave 75 Hz in Flicker Free 75 Hz mode - Square wave approx 1000 Hz in 1000 Hz mode - Nearly square wave, 60 Hz in Low Noise mode Range % of nominal Lamp power 20,5 kg Protective Rate IP x 243 x 450 mm 118 LIGHTING EQUIPMENT

119 BALLAST ARRI HS BALLAST ARRI 6000/12000 W DMX 300 Hz Lamp Power 6000 W / W constant control Power Regulation Autom. recognition of lamp types 6000 W and W Current Characteristic Dimming Dimensions (HxWxD) Protective Rate IP W Lamp Line Power 6900 V (max.) Supply Voltage Nominal Current W Lamp Line Power Supply Voltage Nominal Current Square wave, 75 Hz in Flicker Free Mode Range % of nominal Lamp power 39,5 kg 498 x 263 x 506 mm V / V~ 50/60 Hz 1, N, PE A / A V (max.) V~ 50/60 Hz 1, N, PE A BALLAST ARRI HIGH SPEED 1200/1800 W 1000 Hz Lamp Power 1200 W / 1800 W constant control Line Power 2600 VA (max.) Supply Voltage v V~ / V~ 50/60 Hz 1, N, PE Nominal Current 25 A-20 A / 13 A-10 A Current Characteristic Dimming Dimensions (HxWxD) Protective Rate IP 22 - Square wave, 75 or 1000 Hz (adjustable Hz) in FF Flicker Free mode - Nearly square wave, 50 Hz in low noise mode 50 to 100% of nominal lamp power 8 kg 200 x 156 x 335 mm 119 LIGHTING EQUIPMENT

120 BALLAST ARRI HS BALLAST ARRI HIGH SPEED 575/800 W 1000 Hz Lamp Power 575 W / 800 W constant control Line Power 1160 VA (max.) Supply Voltage V~ / V ~ 50/60 Hz 1, N, PE Nominal Current Current Characteristic Dimming Dimensions (HxWxD) A / A - Square wave, 75 Hz in Flicker Free mode 1000Hz in HS mode - Nearly square wave, 50/60 Hz in low noisemode 50 to 100% of nominal lamp power 6,5 kg Protective Rate IP x 202 x 334 mm BALLAST POWER GEMS HS BALLAST POWER GEMS HIGH SPEED EB1812P Lamp Power W Silent Mode, 100 Hz, 300 Hz, Output Frequency Options 1000 Hz (9 kw only) Input Voltage Range Current Draw VAC 81.7 A 230 V Power Factor > 0.98 DMX Built In Dimensions (HxWxL) Yes 42 kg (without cart) 442 x 322 x 483 mm 120 LIGHTING EQUIPMENT

121 BALLAST POWER GEMS HS BALLAST POWER GEMS HIGH SPEED EB960P Lamp Power 2500 W / 4000 W / 6000 W / 9000 W Output Frequency Hz Silent Mode Input Voltage Range VAC Current Draw 42 A 230 V Power Factor > 0.98 DMX Built In Yes 24.2 kg Dimensions (HxWxL) 312 x 260 x 467 mm BALLAST POWER GEMS HIGH SPEED EB425PL Lamp Power 1200 W / 1800 W / 2500 W / 4000 W Output Frequency 1000Hz, 300 Hz, 100 Hz, Silent Mode Input Voltage Range Current Draw Power Factor > 0.98 DMX Built In Dimensions (HxWxL) VAC 19.6 A 230 V Yes 17 kg 270 x 245 x 445 mm BALLAST POWER GEMS HIGH SPEED EB180P Lamp Power 575 W / 800 W / 1200 W / 1800 W Output Frequency 1000Hz, 300 Hz, 100 Hz, Silent Mode Input Voltage Range Current Draw VAC Power Factor > 0.98 DMX Built In Dimensions (HxWxL) 8.7 A 230 V, 16.7 A 120 V Yes 7.5 kg 115 x 225 x 350 mm 121 LIGHTING EQUIPMENT

122 BALLAST K5600 HS These Ballast HS can only be used with: Joker Bug Joker Bug Joker Bug 400 BALLAST K5600 per JOKER BUG 1600 Lamp Power 1600 W CSR/SE daylight Output Frequency Hz Input Voltage Range VAC Dimming 50% 5,9 kg Dimensions (HxWxL) 266,7 x 216 x 89 mm BALLAST K5600 per JOKER BUG 800 Lamp Power 800 W MSR/SE daylight Output Frequency Hz VAC Input Voltage Range Sliding selector switch: V Dimensions (HxWxL) 3,6K kg 279,4 x 184 x 89 mm BALLAST K5600 per JOKER BUG 400 Lamp Power 400 W MSR/SE daylight Output Frequency Hz VAC Input Voltage Range Sliding selector switch: V Dimensions (HxWxL) 2,72 kg 203 x 184 x 89 mm 122 LIGHTING EQUIPMENT

123 LIGHTING ACCESSORIES MAX MOVER Power VAC, 50/60 Hz, 100 VA Max. Load 80 Kg Max. Fixture Width 0.88 m Min. Fixture Width 0.54 m Max. Speed: Pan/Tilt 360 /min Min. Speed: Pan/Tilt 12.6 /min Max. Speed: Focus 16 rpm 37 kg Size (HxWxD) 965 x 1160 x 300 mm IP Rating IP54 / Protection class 1 DIMMER-SHUTTER For Arrisun Lichttechnik's automated stirrup Dimmer-shutter for HMI Dimmer-shutter for HMI Extension cord for m Extension cord for m Extension cord for m Extension cord for m Extension cord for m Extension cord for m Extension cord for m Extension cord for m Scrim for Fresnel simple/double 123 LIGHTING EQUIPMENT

124 LICHTTECHNIK BAG-O-LIGHT The Bag-o-Light is a revolutionary Light-diffusor, which makes the light very soft and shodow-free. It is well suited for car-shots and fill light on the film set. The idea is simple and brillant: An air filled (compressor) white bag is mounted in front of a regular PAR-headlight. When it is blown up it keeps the air for a few hours (no noise). The light is shining into the bag. On the front is a mirror so that the light is reflected. It is absolutely noise-less and the colour temperature is not affected. It works with PAR lights and spot lense. When a dimmer shutter is mounted the light is also dimmable! Datasheet Light Arrisun 6 kw Length 6 m Diameter 55 cm Light Output (lux) Hight 10 mv Hight 10 m Meters LIGHTING EQUIPMENT

125 LIGHTING ACCESSORIES CHIMERA Ring Maxx Daylight Large Senior Plus 135X180 cm Daylight Bank Large Plus 135X180 cm Daylight Bank Medium Plus 90X120 cm Daylight Bank Small Plus 60X80 cm Daylight bank Large 135x180cm Daylight Bank Medium 90X120 cm Daylight Bank Small 60X80 cm Daylight Bank Quartz Large 135X180 cm Daylight Bank Quartz Medium 90X120 cm Daylight Bank Quartz Small 60X80 cm Fabric Grid per Chimera Large Fabric Grid per Chimera Medium Fabric Grid per Chimera Small Set ring for Varibeam 2000 Chimera for Varibeam 1000 Video Pro Small Octaplus Chimera Grid Octaplus Chimera Ring for chimera LIGHTING ACCESSORIES Avenger Gladiator stand - hight 6,70 m - payload 70 kg (4 risers) Avenger Crank-Up stand - hight 6,20 m - payload 70 kg (4 risers) Avenger Crank-Up stand - hight 4,60 m - payload 70 kg (3 risers) Avenger Crank-Up stand - hight 1,60 m - payload 90 kg Avenger Super Wind-Up stand - higth 3,86 m - payload 80 kg Avenger Wind-Up stand - hight 3,80 m - payload 40 kg Hi Roller Hight stand - hight 4,20 m - payload 40 kg (3 risers) Hi Roller Low stand - hight 3,60 m - payload 40 kg (2 risers) Avenger Combo Steel stand - hight 4,08 m - payload 40 kg (3 risers) Avenger Combo Steel stand - hight 2,40 m (2 risers) Avenger Baby stand Avenger Steel stand - hight 3 m Avenger Steel stand - hight 2,10 m Avenger C-Stand - higth 300 cm Avenger C-Stand - higth 222 cm Avenger C-Stand - higth 155 cm 125 LIGHTING EQUIPMENT

126 LIGHTING ACCESSORIES Turtle base (fixed) Turtle base (folding) Turtle base (folding + wheels) Mini Turtle base 300 W W Avenger Conka Bonka stand extencion Mini-Boom Boom stand T bar Adapter 16 to 28 mm Adapter 28 to 16 mm Avenger Conka bonka stand extencion (combo steel stand) 0,25-0, m Avenger Conka bonka stand extencion (combo steel stand) 0,25-0, m Avenger Conka bonka stand extencion with clamp Pin Pin clamp Set Cardellini clamp (5 pieces) C clamp Snoot for fresnel ( ) Snoot for fresnel ( ) Holder for frame Junior offset Offset for fresnel Avenger French flag (25x40) with ball and socket arm Avenger Metal French flag (25x40) with ball and socket arm Silk flag (40x100) Silk flag (60x60) Silk flag (120x120) Simple scrim flag (120x120) Double scrim flag (120x120) Floppy Flag (120x120) Solid cloth flag (50x150) Solid cloth flag (60x100) Solid cloth flag (40x60) Simple/Double scrim flag (120x120) Simple/Double scrim flag (60x100) Simple/Double scrim flag (40x100) Optical filter for Varibeam Optical filter for Varibeam Magic Arm (4 pieces) Avenger C500 Pellican gaffer grip Gaffer grip clamp Super clamp 126 LIGHTING EQUIPMENT

127 POWER BOXES Switchboard input Unilock Veam 380 V 250 A > 9x63 A mono-phase > 3x63 A three-phase Switchboard input Unilock Veam 380 V 250 A > 6x63 A mono-phase > 3x32 A mono-phase + 3 Veam mono-phase Switchboard input Unilock Veam 380 V > 6 Unilock Veam mono-phase > 380 V Unilock Veam three-phase Box input Unilock Veam > 6x63 A mono-phase Box input three-phase 125 A - mono-phase output 3x125 A Box input three-phase 125 A - output three-phase 2x63 A Box input three-phase 63 A - output mono-phase 3x63 A Box input three-phase 63 A - output mono-phase 6x32 A Box input three-phase 63 A - output three-phase 2x32 A Box input three-phase 32 A - output mono-phase 3x32 A Box input three-phase 16 A - output mono-phase 3x16 A Box input three-phase 63 A - output mono-phase 2x32 A + mono-phase 2x16 A Unilock Veam cable 100 mm² x 30 m Unilock Veam cable 50 mm² x 30 m Cable three-phase 5x35 mm² 125 A 15 m Cable three-phase 5x10 mm² 63 A 3 m Cable three-phase 5x10 mm² 63 A 15 m Cable mono-phase 125 A 20 m Cable mono-phase 125 A 10 m Extencion cord mono-phase 63 A 20 m Extencion cord mono-phase 63 A 10 m Extencion cord mono-phase 32 A 20 m Extencion cord mono-phase 32 A 10 m Extencion cord mono-phase 16 A 20 m Extencion cord mono-phase 16 A 10 m Extencion cord mono-phase 16 A 5 m Box input mono-phase 1x3 A - output 6x16 A) Splitter 5x35 mm² with input three-phase 125 A Splitter 3x25 mm² with input mono-phase 125 A Splitter 5x10 mm² with input three-phase 63 A Splitter 3x10 mm² with input mono-phase 63 A Splitter 5x6 mm² with input three-phase 32 A 127 LIGHTING EQUIPMENT

128 POWER BOXES Splitter 3x6 mm² with input mono-phase 32 A Splitter 3x1,5 mm² with input mono-phase 15 A Various Splitter (schuko - French - Swiss) Multiple socket and varous adaptation Adapter mono-phase 125 A mono-phase 2x63 A Adapter mono-phase 63 A mono-phase 2x32 A Adapter mono-phase 32 A mono-phase 2x16 A Splitter mono-phase 16 A mono-phase 2x16 A (scame) Adapter three-phase 125 A three-phase 2x63 A Adapter three-phase 63 A three-phase 2x32 A Adapter Scame 16 A to 15 A Adapter Scame 15 A to 16 A DIMMER Digital dimmer 6x10 kw - input three-phase 1x125A Digital dimmer 3x12 kw - input three-phase 1x63A Digital dimmer 3x10 kw - input three-phase 1x63A Digital dimmer 12x5 kw - input three-phase 2x63A Digital dimmer 12x2,5 kw - input three-phase 1x63A Digital dimmer 6x5 kw - input three-phase 1x63A Analogic/digital dimmer 6x2,5 kw - input three-phase 1x32A Dimmer 1x12 kw - input three-phase 63A Dimmer 1x10 kw - input three-phase 63A Dimmer 1x6 kw DMX control - input mono-phase 63A Dimmer 1x5 kw - input mono-phase 32A Dimmer 2x2,5 kw - input mono-phase 32A Dimmer 2 kw - input mono-phase 16A Dimmer 1x1 kw 128 LIGHTING EQUIPMENT

129 CONSOLLES CONSOLLE SPARK 4D 1536 DMX channels + FX CONSOLLE SPARK 1028 DMX channels ARRI 120 CHANELS With memories - output DMX 512 (Infrared monitor and remote controler) ADB TANGO 24/48 channels Output DMX 512 BOTEX 24/48 channels CONSOLLE STRAND 100 SERIES Output DMX 512 ADB BOLERO 24/48 channels Output DMX LIGHTING EQUIPMENT

130 CONSOLLES ADB 12 channels manual Output DMX 512 ADB 6 channels manual Output DMX 512 SIDEWINDER Output DMX 512 Programmable via handheld LFX HUB Output - 2 DMX channels - 1 2,5 kw channels FLICKERMASTER SPE-6 2 kw Consolle 12 channels Arri FX (analogic output V Neon control) DMX cable 10 m 130 LIGHTING EQUIPMENT

131 GENERATORS 131

132 GENERATORS GENERATOR 150 kw 380V Transportable Size (HxWxL) Fuel consumption Botticella & Overland 4x4 2,32 x 2,46 x 13,52 m 3800 kg 43 L/h GENERATOR 100 kw 380V Transportable Size (HxWxL) Fuel consumption Botticella & Overland 4x4 1,80 x 1,23 x 2,80 m 2250 kg 42 L/h GENERATOR 50 kw 380V Transportable Size (HxWxL) Fuel consumption Botticella & Overland 4x4 1,80 x 1,10 x 2,38 m 1600 kg 30 L/h GENERATOR 20 kw 380V EURO 6 Transportable Vans Size (HxWxL) 1,50 x 0,85 x 1,83 m 800 kg Fuel consumption 20 L/h 132 GENERATORS

133 GENERATORS GENERATOR 20 kw 380V Transportable Size (HxWxL) Fuel consumption Vans 1,50 x 0,85 x 1,83 m 800 kg 20 L/h GENERATOR 12 kw 380V Transportable Size (HxWxL) Fuel consumption Vans 1,50 x 0,85 x 1,83 m 800 kg 20 L/h GENERATOR HONDA EXT 12 kw 380V Size (HxWxL) 0,87 x 0,63 x 1,35 m 350 kg GENERATOR HONDA EXT 10 kw 380V Size (HxWxL) 0,87 x 0,63 x 1,35 m 350 kg 133 GENERATORS

134 GENERATORS GENERATOR HONDA EU 70 is 7 kw 220V With INVERTER Size (HxWxL) 0,85 x 0,66 x 0,69 m 117 kg GENERATOR HONDA EU 65 is IT 5 kw 220V With INVERTER Size (HxWxL) 0,80 x 0,67 x 0,69 m 128 kg GENERATOR HONDA EU 30 is 3 kw 220V With INVERTER Size (HxWxL) 0,70 x 0,45 x 0,60 m 59 kg GENERATOR HONDA EU 20 is 2 kw 220V With INVERTER Size (HxWxL) 0,51 x 0,29 x 0,42 m 21 kg GENERATOR HONDA EU 20 is 2 kw 220V With INVERTER Size (HxWxL) 0,45 x 0,23 x 0,40 m 13 kg 134 GENERATORS

135 ENGINEERING DEPARTMENT 135

136 FILO VIA Filo Via is a motorized dolly that traveling on thin eletromanietic tape. The latter can be paintable or coverable with 30 mm flooring. The electromagnetic tape can be intersect, it creating various changes of direction, that the camera operator can selects easily by his position. Filo Via can be controlled by Easy CAMS PAN/BAR. Easy CAMS is composed by flowing-head on which is mounted a monitor, when you moved PAN/BAR control also the camera it move. One other control is Easy CAMS Console with Joystick; both has control unit for: column, dolly focus, iris and zoom. By means of the touch monitor, camera operator can be setting and see: - Condition of all axes: rate, smoothing, inversion and autoset. - Possibility to select and move two cameras. - Tally reporting - Track reporting - Signal of longitudinal position of the dolly on the track. - Gharge battery reporting - Visualisation software - Movement PAN/BAR x4 - x2 - x1 - x1/2 - x1/4. You will found the "DATA SHEET" in the next page 136 ENGINEERING DEPARTMENT

137 Data Sheet Payload Optical centre Max. speed Dolly size (HxWxL) Min. turning radius Operator control unit Power supply Battery autonomy Max distance Wireless Easy Cams Safety system 25 kg Min height without telescopic column: 50cm Height with telescopic column: 95/105 cm to 165/175 cm Dolly: 1,0 m/s Pan/Tilt: 450 /s 250 x 550 x 990 mm 1,3 m PAN/BAR Consolle Joystick Software for recall of position (optional) Master PAN/BAR: VDC Slave: 3 battery box 24 VDC 10A Master joystick (Manual/Drive): 12-30VDC or battery V-Lock 6 h 200 m Slowing magnets Brakeing magnets Anti-collision sensor disengaged and rudder Emergency stop Automatic speed limitation round a corner min max min. 950 max Pendenza 10 The measures are in millimeters (mm) 137 ENGINEERING DEPARTMENT

138 FLOOR CAMS Floor CAMS is a MD (Modular Digital) Dolly on tracks, it is equipped with Remote Head 2 Axes (optional 3 Axes); the latter can accommodate any type of camera and lens. Like any equipment CAMS MD 2 Axis, it is completely modular and compatible with all our products. The tracks can be straight or curved (radius from 3 to 20 m), with 50 cm width. Floor CAMS can be controlled by Easy CAMS PAN/BAR, Console with Joystick, Wheels and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. You will found the "DATA SHEET" in the next page 138 ENGINEERING DEPARTMENT

139 Data Sheet Payload Optical centre Max. speed Track size (LxW) Turning radius Movements Operator control unit Power supply Max distance Wireless Easy Cams Safety system 25 kg Min height without telescopic column: 50cm Max. height with bazooka risers: 70 cm Dolly: 1,7 m/s Pan/Tilt: 280 /s Straight: 500x900/1900/2900 mm 3 to 20 m Automatic acceleration and de-accelerator PAN/BAR Consolle Joystick Wheels Pedal Software for recall of position (optional) VAC 20 m Slowing magnets Brakeing magnets Mechanical end of stroke with de-accelerator Emergency stop BAZOOKA Ø100 h The measures are in millimeters (mm) 139 ENGINEERING DEPARTMENT

140 FLOOR LIFT Floor Lift is a MD (Modular Digital) Dolly on tracks, it is equipped with Telescopic Column with extension from 1 to 1,70 m. Moreover it is equipped Remote Head 2 Axes (optional 3 Axes); the latter can accommodate any type of camera and lens. Like any equipment CAMS MD 2 Axis, it is completely modular and compatible with all our products. The tracks can be straight or curved (radius from 3 to 20 m), with 50 cm width. Floor Lift can be controlled by Easy CAMS PAN/BAR, Console with Joystick, Wheels and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. You will found the "DATA SHEET" in the next page 140 ENGINEERING DEPARTMENT

141 Data Sheet Payload Optical centre Max. speed Track size (LxW) Turning radius Operator control unit Power supply Safety system 25 kg Standard mode: 1 to 1,7 m Dolly: 2,7 m/s Pan/Tilt: 280 /s Straight: 0,5x0,9/1,9/2,9 m 3 to 20 m (other size on request) PAN/BAR Consolle Joystick Wheels Pedal Software for recall of position (optional) 220/115VAC Slowing magnets Brakeing magnets Mechanical end of stroke with de-accelerator Emergency stop The measures are in millimeters (mm) 141 ENGINEERING DEPARTMENT

142 UNDERCOVER TRUCKS FLOOR CAMS/FLOOR LIFT Both the Floor CAMS system and the Floor Lift system can be modified at the request of the customer. Tracks and motor driving will hidden under a platform. For both dollys, the measures shown, except those of the platform and the dolly, can be modified according at requirements. At the end of the track at one end is the engine block, at the other the return block. The area of the engine block must also be accessible at the end of the installation. Floor Cams Floor Lift Optical centre 50 cm Optical centre 1 to 1,70 m Base dimension 50x50 cm Base dimension 70x70 cm You will found the "DATA SHEET" in the next page 142 ENGINEERING DEPARTMENT

143 UNDERCOVER TRUCKS FLOOR CAMS/FLOOR LIFT Engine compartment size Height Width Length 170 mm 500 mm 350 mm Min ø FLOOR MDF: 10 mm Sheet metal: 2 mm Metal profile: 20 mm The measures are in millimeters (mm) 143 ENGINEERING DEPARTMENT

144 FLOOR SPORT Floor Sport is a compact dolly designed for outer shooting. It is a very fast motorized dolly, it can reach 14 m/s, but the shooting they will be allways fluid and precision. Floor Sport can works also to very slow temperature, the tracks can be heating to 20 C and also all elettrical conectors are waterproof. Camera operator can works reach 200 m to system thanks to wirelees, the latter moveds the CAMS MS 2 Axes without any type of cables. You will found the "DATA SHEET" in the next page 144 ENGINEERING DEPARTMENT

145 Data Sheet Payload Optical centre Max. speed Track size (LxW) Movements Operator control unit Power supply Battery autonomy Safety system 25 kg 50cm Dolly: 14 m/s 50 km/h Pan/Tilt: 280 /s Straight: 0,5x0,9/1,9/2,9 m Automatic/ Programmable acceleration and de-accelerator PAN/BAR Consolle Joystick Wheels Dolly: 220/115 VAC 4 kw Battery: 12 VDC 7 Ah Wireless: 2,4 Hz banda ISM Heat duct for truck: 100 W/h 6 h Slowing magnets Brakeing magnets Emergency control "dead-man switch" Emergency stop (fig. 1) (fig. 2) (fig.1) Cross section of Floor Sport system without trucks. (fig.2) Cross section of Floor Sport system on trucks. The measures are in millimeters (mm) 145 ENGINEERING DEPARTMENT

146 ROLLY Rolly is a compact modular dolly, that allow you moved the camera on any type of wall. It is a perfect solution for balustrade in a teater or in television studios. The tracks can be straight or curved for your needs. Rolly is quipped with Remote Head 2 Axes (optional 3 Axes); the latter can mounted above or below. Camera operator can works 1,2 km to the system with cables, and reach 200 m with wireles system. Rolly can be controlled by Easy CAMS PAN/BAR, Console with Joystick, Wheels, Bracialet and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. You will found the "DATA SHEET" in the next page 146 ENGINEERING DEPARTMENT

147 Data Sheet Payload Max. speed Track size (LxW) Turning radius Operator control unit Power supply Max distance Wireless Easy Cams Safety system 25 kg Dolly: 1,7 m/s Pan/Tilt: 280 /s Straight: 500x900/1900/2900 mm 3 to 20 m PAN/BAR Consolle Joystick Wheels Pedal Bracialet Software for recall of position (optional) VDC 200 m Slowing magnets Brakeing magnets Decelerazione meccanica di fine corsa Emergency stop The measures are in millimeters (mm) 147 ENGINEERING DEPARTMENT

148 CEILING DOLLY Ceiling Dolly is dolly on traks designed to be hung on ceiling. This system can mont three type of Remoted Head: CAMS, CAMS MD and EASY CAMS. The tracks can be straight or curved (radius from 3 to 6 m), with 70 cm width and it can be controlled by PAN/BAR, Console with Joystick and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. You will found the "DATA SHEET" in the next page 148 ENGINEERING DEPARTMENT

149 Data Sheet Payload Optical centre Max. speed Track size (LxW) Turning radius Operator control unit Movements Alimentazione Sistemi di sicurezza 25 kg 90 cm Dolly: 1,7 m/s Pan/Tilt: 280 /s Straight: 700x900/1900/2900 mm 3 to 6 m PAN/BAR Consolle Joystick Software for recall of position (optional) Programmable acceleration and de-accelerator VDC Slowing magnets Brakeing magnets Mechanical end of stroke with de-accelerator Emergency stop , The measures are in millimeters (mm) 149 ENGINEERING DEPARTMENT

150 AIR COMPACT Air Compact is a MD (Modular Digital) Dolly on tracks, it is equipped with Remote Head 2 Axes (optional 3 Axes); the latter can accommodate any type of camera and lens. Like any equipment CAMS MD 2 Axis, it is completely modular and compatible with all our products. The tracks can be straight or curved (radius from 3 to 20 m), with 50 cm width, the system cables are placed alongside the tracks. Air Compact can be controlled PAN/BAR, Console with Joystick, Wheels and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. You will found the "DATA SHEET" in the next page 150 ENGINEERING DEPARTMENT

151 Data Sheet Payload Optical centre Max. speed Track size (LxW) Turning radius Movements Operator control unit Power supply Max distance Wireless Easy Cams Safety system 25 kg 90cm Dolly: 1,7 m/s Pan/Tilt: 280 /s Straight: 500x900/19000/2900 mm 3 to 20 m Automatic acceleration and de-accelerator PAN/BAR Consolle Joystick Wheels Pedal Software for recall of position (optional) VAC 200 m Slowing magnets Brakeing magnets Mechanical end of stroke with de-accelerator Emergency stop The measures are in millimeters (mm) 151 ENGINEERING DEPARTMENT

152 POLE CAMS Pole CAMS is a modular telescopic crane, that allows a vertical moved, it is available in four different versions: 13M, 6M, 4M, 2M and Rail Pole. It is it is equipped with Remote Head CAMS 2 Axes or 3 Axes. Pole CAMS can be controlled by PAN / BAR, Wheels, Bracialet and Pedal Control. Also it can be controlled the Focus and Zoom besides lenght and speed of movement of the crane sections. CAMS system has possibility to select a increase of flowing-head's movements (x1/4 - x1/2 - x1 - x2 - x4). You will found the "DATA SHEET" in the next pages 152 ENGINEERING DEPARTMENT

153 POLE CAMS 13 m Payload Arm's weight Max. speed Arm's extension Operator control unit Power supply Safety system 25 kg 250 kg 280 /s Pan e Tilt Arm's exursion: 1 m/s 4 to 13 m PAN/BAR Wheels Bracialet Pedal Focus Zoom Section's lenght are editable Section's speed are editable VAC Mechanical slowing Mechanical brakeing Mechanical end of stroke with de-accelerator Emergency stop POLE CAMS 13M Ingombro catena portacavi 506 Altezza MAX The measures are in millimeters (mm) 153 ENGINEERING DEPARTMENT

154 POLE CAMS 6 m Payload Arm's weight Max. speed Arm's extension Operator control unit Power supply Safety system 25 kg 180 kg 280 /s Pan e Tilt Escursione braccio: 1 m/s 3 to 6 m PAN/BAR Wheels Bracialet Pedal Focus Zoom Section's lenght are editable Section's speed are editable 220/115VAC Mechanical slowdown Mechanical brakeing Mechanical end of stroke with de-accelerator Emergency stop POLE CAMS 6M MAX. Heght 6323 The measures are in millimeters (mm) 154 ENGINEERING DEPARTMENT

155 Payload Arm's weight Max. speed Arm's extension Operator control unit Power supply Safety system 25 kg 66 kg 280 /s Pan e Tilt Arm's exursion: 1 m/s 1,70 to 4 m PAN/BAR Wheels Bracialet Pedal Focus Zoom Section's lenght are editable Section's speed are editable 220/115 VAC Mechanical slowing Mechanical brakeing Mechanical end of stroke with de-accelerator Emergency stop POLE CAMS 4M Altezza MAX The measures are in millimeters (mm) 155 ENGINEERING DEPARTMENT

156 POLE CAMS 2 m Payload Arm's weight Max. speed Arm's extension Operator control unit Power supply Safety system 25 kg 40 kg 280 /s Pan e Tilt Arm's exursion: 1 m/s 1,60 to 3,40 m PAN/BAR Wheels Bracialet Pedal Focus Zoom Section's lenght are editable Section's speed are editable 220/115 VAC Mechanical slowing Mechanical brakeing Mechanical end of stroke with de-accelerator Emergency stop POLE CAMS 2M Altezza MAX The measures are in millimeters (mm) 156 ENGINEERING DEPARTMENT

157 POLE CAMS RAIL POLE Both on Pole CAMS 6M and on Pole CAMS 13M it is possible to integrate an Air Dolly that allows it to move horizontally along a track, this is mounted on a straight truss. Data Sheet Max. speed Dolly's size (LxW)* Operator control unit Power supply Safety system Crane / Dolly 1 m/s *2,00 x 0,57 m A corridor of 1.30 / 1.50 m is required Dolly: 63 kg Truss 3 m with trucks: 40 kg PAN/BAR Wheels Bracialet Pedal Focus Zoom Section's lenght are editable Section's speed are editable 220/115 VAC Mechanical slowing Mechanical brakeing Mechanical end of stroke with de-accelerator Emergency stop ,5 The measures are in millimeters (mm) 157 ENGINEERING DEPARTMENT

158 SHUTTLE Shuttle is a vertical dolly height 18 m (over on request) wiht base lesser than 2x2 m. It is boasts a very clear positioning and a flowing movement, with a optics range from 0,50 to 18 m. Shuttle can be controlled by PAN/BAR, Console with Joystick, Wheels and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. Camera operator can works reach 200 m to system thanks to wirelees, the latter moveds the CAMS MS 2 Axes without any type of cable. You will found the "DATA SHEET" in the next page 158 ENGINEERING DEPARTMENT

159 Data Sheet Payload Max. speed Heigth Operator control unit Power supply Max distance Wireless Easy Cams Safety system 25 kg Dolly: 2,7 m/s Pan/Tilt: 280 /s 3 to 18 m PAN/BAR Consolle Joystick Wheels Pedal Software for recall of position (optional) VAC 200 m Slowing magnets Brakeing magnets Mechanical end of strok Emergency stop FRONT VIEW FRONT VIEW CABLES 1000 VIEW FROM ABOVE 1200 CABLES STANDARD HEIGHT From 3000 to CAMERA CAMERA 564 CABLES Size: Camera Cables The measures are in millimeters (mm) 159 ENGINEERING DEPARTMENT

160 TESLA Tesla is a compact dolly can be instalated on floor, ceiling or wall on straight tracks 30 cm wide completed of Remoted Head Easy CAMS 2 Axes. Tesla can be controlled by PAN/BAR, Console with Joystick, Wheels and Pedal Control. Also it can be controlled by a software which memrise its movements and repeat it. Also it has a electrical system of slowing and braking. You will found the "DATA SHEET" in the next page 160 ENGINEERING DEPARTMENT

161 Data Sheet Payload Max. speed Track size (LxW) Movements Operator control unit Power supply Max distance Wireless Easy Cams Safety system 25 kg Dolly: 1,7 m/s Pan/Tilt: 280 /s Straight: 300x900/19000/2900 mm Automatic acceleration and de-accelerator PAN/BAR Consolle Joystick Wheels Pedal Software for recall of position (optional) VAC 200 m Slowing magnets Brakeing magnets Mechanical end of stroke with de-accelerator Emergency stop (fig.1) (fig.2) Track for counterweight Engine compartment 630 (fig.1) TESLA Floor/Air version. (fig.2) TESLA Wall version. The measures are in millimeters (mm) 161 ENGINEERING DEPARTMENT

162 GENUFLEX MK II Genuflex MK II is a Motion Control 9 Axes. This system is composed by a crane on a dolly, the crane can rotate 360 with This system is composed by a crane on a dolly, which can rotate 360 with excursion of 40. This particular crane allow of the camera to moves on three axes (vertical PAN, orizontal PAN, rotation on optic axes), also is possible the control on camera engine (from 1 step to 75fps) and the control of Focus, Iris and Zoom directly on the optics. The system by "virtual axes" function with compensation of the crane and dolly too, it can generate vertical lift and lateral translations of the perfectly straight optic center. You will found the "DATA SHEET" in the next page 162 ENGINEERING DEPARTMENT

163 Data Sheet Track Dolly Arm (Swing) Movement (Boom) Max. speed 6x245 x 66 cm Max. lenght: 1460 cm Dolly's movement on track: 1310 cm 3 curved track 30 (Max. curve. 90 ) Curve radius: 3 m Size (WxL): 800x1400 mm Height point of crane's rotation: 1360 mm Crane's lenght 2,30 m Rotation: +/ 40 Max. range: 2,55 m Optics riser (camera mounted above): max. 3,20 m - min. 0,60 m Optics riser (macchina mounted below): max. 2,15 m - min. 0,40 m Dolly: 1,80m/s (steady speed) 1,00m/s (speed from 0 to 0) Swing: 45 /s Boom: 45 cm/s (max. riser in 6 s) PAN: 90 /s TILT: 60 /s Base and lift: 272 kg Crane (long version): 60 kg Remoted Head PAN e TILT RotoFlex: 20 kg Remoted Head PAN, TILT e ROLL RotoFlex: 30 kg Counterweight: 25 kg Total weight (senza M.d.P): 420 kg The measures are given in millimeters (mm) 163 ENGINEERING DEPARTMENT

164 VIRTUS (fig. 1) Virtus is a crane with an extension of 5 m, designed for work on virtual set. It is equipped with hight technology tracks and complete with remote head. Our tecnology, Virtus 10 HD, can calculate until 10 axes an it is compatible with all mains protocols. Virtus can mounted Virtual Head, a virtual remote head 2 axes, complete of Iris, Focus and Zoom engine for any optics. A smaller and lighter crane is available that can also be equipped with a virtual kit, Junior Crane (page 240) (fig. 2) 2374 (fig.1) Virtual Head (fig.2) Cross section of Virtus 1010 The measures are in millimeters (mm) 164 ENGINEERING DEPARTMENT

165 REMOTE HEAD CRANE DOLLY 165

166 SHOTOVER F1 STABILIZED HEAD Shotover F1 is a gyro-stabilized head 6 axes, it is a smaller and light head with zenital shooting capability. Very high technology design provide an high of stabilisation level for the most important shooting and it has manual or automatic horizont. The hook system is easily adaptable on extended range of mount, so is possible used on crane, dolly and special vehicles. Is possible for you shoot without glass front to obtain an excellent gamut and an image without reflections, also is possible remoted the rotation of polarizer filter and the Rain Spinner. You will found the "DATA SHEET" in the next page 166 REMOTE HEAD / CRANE / DOLLY

167 Data Sheet Stabilization Gyro-stabilized 6 axes Pan: 360 continuous Tilt: +45 to 140 Gimbal field of view Roll: +/ 85 (steerable or auto horizon) Max slew rate: 100 /s Fiber Optic lines CAN Bus Data / Comunication RS 422 Serial Bus Ethernet Turret with max payload less than: 59 kg Operator control unit: 2,7 kg Junction control box: 4 kg External cable set: 2,5 kg VDC Power supply 12 A Max Draw 28 V Operating Temperature 20 to +50 C Customizable video overlay (Monitor Output) Operator control unit Recess for camera remotes such as: Sony RM-B750 / Arri RCU-4 / Canon RC-V100 Canon Canon Angenieux Optimo Angenieux Optimo Angenieux Rouge Angenieux Optimo Angenieux Optimo Angenieux HR Angenieux DP Arri/Fujinon Alura Fujinon Premiere Fujinon Premiere Fujinon Cabrio Fujinon Cabrio Fujinon 42 x 9.7 Fujinon 42 x 13.5 Zeiss 14 mm Master Prime Zeiss 16 mm Master Prime Fujinon Arri/Fujinon Alura Arri UWZ Canon CanonCN20x50 Canon 14 x 4.3 Fujinon 14 x 4.5 EF Fish Eye Arri Alexa MINI Arri Alexa M RED Weapon RED Dragon Sony F55 * Sony F55 ** Flex 4K Canon C500 Sony 2500 Sony P1 Con adattatore HDx35 IBE 2x Con o senza IBE 1.4x Sony F55 * With Recorder ** Without Recorder 167 REMOTE HEAD / CRANE / DOLLY

168 FLIGHT HEAD V STABILIZED HEAD Flight Head V is a gyro-stabilized head 3 axes that reduced any stroke, jerk and twitch. PAN and TILT systems balance the movement of the crane or special vehicles, providing more assistance to the operator. Flight Head 5 has the automatic digital horizon but can be deactivated for greater ROLL control, camera operator can control Focus and Zoom engine in remoted. Also it is 4 axis which allows zenital shooting. You will found the "DATASHEET" in the next page 168 REMOTE HEAD / CRANE / DOLLY

169 Datasheet Stabilization Payload Gimbal field of view Data / Comunication Power supply Gyro-stabilized 3 axes (4 axis optional) PAN compensation 45 kg PAN: 360 TILT: 200 ROLL: 270 (auto-horizont) Max. speed PAN - TILT - ROLL: 160 /s RF Wireless 24 kg VDC 15 A max Operating Temperature 40 to +43 C Operator control unit Preston FIZ allows control of focus and Zoom engine (fig.1) (fig.2) (fig.1) FLIGHT HEAD V with camera. (fig.2) FLIGHT HEAD V without camera. The measures are in millimeters (mm) 169 REMOTE HEAD / CRANE / DOLLY

170 MINI FLIGHT HEAD STABILIZED HEAD Mini Flight Head è una testa a 3 assi giro-stabilizzata, realizzata interamente in fibra di carbonio è la più piccola e leggera testa stabilizzata in circolazione. Mini Flight Head è adatta ad ogni supporto, può essere montata sia su supporti come la Steadycam o crane e dolly sia su mezzi speciali come il Mini Russian Arm You will found the "DATA SHEET" in the next page 170 REMOTE HEAD / CRANE / DOLLY

171 Data Sheet Stabilization Payload Gimbal field of view Data / Comunication Power supply Gyro-stabilized 3 axes 11,8 kg PAN: 360 TILT: 200 ROLL: 270 (auto-horizont) Max. speed PAN - TILT - ROLL: 160 /s RF Wireless 9,5 kg VDC 15 A max Operating Temperature 40 to +43 C 544,83 / 644,9 RANGE / / 719, / 429,5 614,68 The measures are in millimeters (mm) 171 REMOTE HEAD / CRANE / DOLLY

172 NEW STABILIZED HEAD DESIGN BY MOVIE PEOPLE Movie People's STABIL CAMS Data Sheet Stabilization Payload Gimbal field of view Power supply Operator control unit Data / Comunication Dimensioni Max (HxL) Gyro-stabilized 3 axes 40 kg PAN/TILT: 360 ROLL: MAX. SPEED PAN/TILT/ROLL: 180 /s Auto-horizont Head drift: No 24/30 VDC - 15 A PAN/BAR* Wheels Joystick RS-485 protocol 92x62 cm 30 kg Operating Temperature -40 a +40 *PAN / BAR is the only camera control unit that allows a very high resolution of movement, with Stabil CAMS is possible to reach STEPS You will found the "DRAWING" in the next page 172 REMOTE HEAD / CRANE / DOLLY

173 STABIL CAMS drawings The measures are in millimeters (mm) 173 REMOTE HEAD / CRANE / DOLLY

174 CAMS MD 3 AXES REMOTE HEAD CAMS MD is a remoted head 3 axes, it is light, versatile and modular. It can be mounted on crane, dolly, coloumns, bazooka risers and customized unit. On CAMS MD 3 Axes you can mount Cine or ENG cameras. CAMS MD can be controlled by PAN/BAR, Console with Joystick and Wheels; also it can be controlled by a software which memrise its movements and repeat it. Camera operator can works reach 1,2 km to remote head, the latter is complete of three Focus, Zoom and Iris engine. You will found the "DATASHEET" in the next page 174 REMOTE HEAD / CRANE / DOLLY

175 Data Sheet Payload Max. speed Camera control unit Engine 25 kg 14 kg 280 /s PAN/BAR Consolle Joystick Wheels Software for recall of position (optional) Focus, Zoom and Iris engine 3 complite of rings mm ø 50 mm 728,65 737, , ,08 (fig. 1) 370 (fig. 2) (fig.1) CINE version. (fig.2) VIDEO version. The measures are in millimeters (mm) 175 REMOTE HEAD / CRANE / DOLLY

176 CAMS MD 2 AXES REMOTE HEAD CAMS MD is a remoted head 3 axes, it is light, versatile and modular. It can be mounted on crane, dolly, coloumns, bazooka risers and customized unit. On CAMS MD 3 Axes you can mount Cine or ENG cameras. CAMS MD can be controlled by PAN/BAR, Console with Joystick and Wheels; also it can be controlled by a software which memrise its movements and repeat it. Camera operator can works reach 1,2 km to remote head, the latter is complete of three Focus, Zoom and Iris engine. You will found the "DATA SHEET" in the next page 176 REMOTE HEAD / CRANE / DOLLY

177 Data Sheet Payload Max. speed Camera control unit Engine 25 kg 7 kg 280 /s PAN/BAR Consolle Joystick Wheels Software for recall of position (optional) Focus, Zoom and Iris engine 3 complite of rings mm ø 50 mm , The measures are in millimeters (mm) 177 REMOTE HEAD / CRANE / DOLLY

178 CAMS 3 AXES REMOTE HEAD CAMS 3 Axes is a remoted head 3 axes, it is light, versatile and modular. It can be mounted on crane, dolly, coloumns, bazooka risers and customized unit. On CAMS 3 Axes you can mount Cine or ENG cameras. It can be controlled by PAN/BAR and Wheels; This remote head is complete of three Focus, Zoom and Iris engine. Data Sheet Payload Max. speed Camera control unit 35 kg Video: 25 kg Cine: 30 kg 180 /s PAN/BAR - Wheels (fig. 1) (fig. 2) (fig.1) CINE version. (fig.2) VIDEO version. The measures are in millimeters (mm) 178 REMOTE HEAD / CRANE / DOLLY

179 CAMS 2 AXES REMOTE HEAD CAMS 2 Axes is a remoted head 2 axes, it is light, versatile and modular. It can be mounted on crane, dolly, coloumns, bazooka risers and customized unit. On CAMS 2 Axes you can mount Cine or ENG cameras. It can be controlled by PAN/BAR and Wheels; This remote head is complete of three Focus, Zoom and Iris engine. Data Sheet Payload Max. speed Camera control unit 30 kg Video: 15 kg Cine: 22 kg 180 /s PAN/BAR - Wheels 562, , (fig. 1) (fig. 2) (fig.1) CINE version. (fig.2) VIDEO version. The measures are in millimeters (mm) 179 REMOTE HEAD / CRANE / DOLLY

180 AQUA CAMS UNDERWATER REMOTE HEAD Aqua CAMS is a remote head design for underwater shooting. This head allows a flowing and perfect movment underwater too, it can used in swimming pool or in sea, it can be mounted on crane coloumns, bazooka risers and customized unit. On Aqua CAMS you can mount Cine or ENG cameras. It can be controlled by PAN/BAR and Wheels. Data Sheet Payload Max. deep Max. speed Camera control unit 30 kg 22 kg 10 m 180 /s PAN/BAR Wheels You will found the "DRAWING" in the next pages 180 REMOTE HEAD / CRANE / DOLLY

181 423 AQUA CAMS drawings ,5 502, , The measures are in millimeters (mm) 181 REMOTE HEAD / CRANE / DOLLY

182 413 AQUA CAMS drawings 502, , , The measures are in millimeters (mm) 182 REMOTE HEAD / CRANE / DOLLY

183 AUTO-MOTION Auto-Motion is a system that allow the saving and replication of the axes' movements, from A to B point. Benefit of this system can be apply both CAMS system as the floor or ceiling dollies. Auto-Motion operates with Memo-Keypad, the latter is small and easy use, this accessory allow the recall of position through a simple keypad, also it is can customized movements' speed. Is possible linked this system with all camera control unit. System Memo-Keypad Camera Control Units 183 REMOTE HEAD / CRANE / DOLLY

184 CONTROL CAMS / CAMS MD PAN/BAR Control 4 Axes CAMS TABLET PAN BAR Control 2 Axes EASY CAMS PAN BAR Control 3 Axes CAMS MD WHEELS Control 2/3 Axes CAMS CAMS MD EASY CAMS 184 REMOTE HEAD / CRANE / DOLLY

185 CONTROL CAMS / CAMS MD CONSOLE JOYSTICK CAMS MD CONSOLE JOYSTICK EASY CAMS PC MOTION CONTROL EASY CAMS ZOOM Control BRACELET Control PEDAL Control 185 REMOTE HEAD / CRANE / DOLLY

186 VARIZOOM CINEMA PRO-K2 Cinema Pro-K2 is remoted head 2 Axes, speedy and flowing in his movement. It can be mounted on crane, dolly, coloumns, bazooka risers and customized unit, also it can works with a extended selection of Cine or ENG cameras. Cinema Pro-K2 is complete of the joystick camera control 3 axes, PAN, TILT and Zoom are customize, oversize focus' grips, back-lite kaypad, parametric menu settings and the options interface Data Sheet Gimbal field of view Data / Comunication Operator control unit Size (HxWxD) PAN: 360 TILT: 360 Max. speed PAN - TILT: 210 /s Fiber Optic lines Wirless (optional) 24 kg PAN/BAR + Varizoom's Joystick 4953 x 305 x 152 mm 186 REMOTE HEAD / CRANE / DOLLY

187 TECHNOCRANE SUPERTECHNO 50 TELESCOPIC CRANE SuperTechno 50 is one of the most important innovations in the cinematographic field. This crane guarantees complete support for every shooting. With m height, It is one of most tall, fast and versatile crane in the world and combines high multifunctionality with ease of use. The main features, such as high dynamism, extreme lightness and maximum precision, differentiate it from other cranes. In just a few seconds, the camera can be placed anywhere, even in the most unreachable corners and in absolute silence, making a great success, giving an effect of freedom and flying of amazing image. You will found the "DATASHEET" and "DRAWING" in the next pages 187 REMOTE HEAD / CRANE / DOLLY

188 Datasheet Max. lens height Max. speed Max. telescopic range Back lenght Tot. lenght 15,11 m 2 m/s 11,40 m 3,70 m 18,45 m 2300 kg SUPERTECHNO 50 drawings 3,35 3,70 0,85 1,44 2,08 2,45 2 1,95 2,42 2 The measures are in meters (m) 188 REMOTE HEAD / CRANE / DOLLY

189 SUPERTECHNO 50 drawings 15,11 MAX LENS HEIGT 18,45 14,75 3, ,40 TELESCOPIC RANGE 1,54 ELEVATION 8,97 The measures are in meters (m) 189 REMOTE HEAD / CRANE / DOLLY

190 TECHNOCRANE SUPERTECHNO 30 TELESCOPIC CRANE SuperTechno 30 is a telescopic crane designed and built to offer creative possibilities without limits. It is able to reach the most inaccessible corners, to be maneuver in the smallest space, to be move in absolute silence back and forth, SuperTechno 30 combines versatility, quality and, productivity. While you are shooting a TV show in a small space, an advertising spot with a small frame or a movie, the SuperTechno 30 always offers the best solution. You will found the "DATA SHEET" and "DRAWING" in the next pages 190 REMOTE HEAD / CRANE / DOLLY

191 Data Sheet Max. lens height Max. speed Max. telescopic range Back lenght Tot. lenght 9,2 m 2,8 m/s 9,55 m 2,4 m 11,95 m 1200 kg SUPERTECHNO 30 drawings 2,65 2,40 2,10 0,91 1,50 1,65 1,44 1,49 1,95 1,2 The measures are in meters (m) 191 REMOTE HEAD / CRANE / DOLLY

192 SUPERTECHNO 30 drawings 9,20 MAX LENS HEIGT 11,95 9,55 2, ,90 TELESCOPIC RANGE 0,45 ELEVATION 6,38 The measures are in meters (m) 192 REMOTE HEAD / CRANE / DOLLY

193 TECHNOCRANE NEW TECHNOCRANE 22 TELESCOPIC CRANE Data Sheet Max. lens height Max. speed Max. telescopic range Back loenght Tot. lenght 6,62 m 1,5 m/s 6,22 m 2,04 m 8,26 m 350 kg 6,62 MAX LENS HEIGT 8,26 2,04 6, ,08 4,73 TELESCOPIC RANGE The measures are in meters (m) 193 REMOTE HEAD / CRANE / DOLLY

194 TELESCOPIC LLC TECHNO-JIB 24 TELESCOPIC CRANE Data Sheet Max. lens height Max. speed Max. telescopic range Back loenght Tot. lenght 7,6 m 1,5 m/s 7,30 m 2,04 m 1,8 m 650 kg 7,60 MAX LENS HEIGT 2 7, ,10 1,10 3,60 The measures are in meters (m) 194 REMOTE HEAD / CRANE / DOLLY

195 INNOVISION OPTICS Z-JIB Lightweight and compact, with one 360 rotation around his dolly. The camera can get toa height of 3,35 m and can go down to less than 2,5 m below the level of the dolly. The countless positions and his fluid movements allow complete panoramas from each point of view on two tracks 62 and 100 cm wide. 2,44 3,35 3,96 0,60 Floor Off set floor The measures are in meters (m) 195 REMOTE HEAD / CRANE / DOLLY

196 PANTHER FOXY PRO Remote Head 4 2,45 2,5 80 kg Max. height: 3,7 m ,45 4,2 80 kg Max. height: 4,9 m ,45 5,7 80 kg Max. height: 6,1 m ,45 5,7 80 kg Max. height: 6,1 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 196 REMOTE HEAD / CRANE / DOLLY

197 Remote Head 24 2,45 7,2 80 kg PANTHER FOXY PRO 4 Max. height: 7,4 m 5 80 kg 30 Max. height: 8,6 m 2,45 8, Max. height: 9,8 m 80 kg 6 2,45 10, Max. height: 11,1 m 50 kg 7 2,45 11, Max. height: 10,5 m 55 kg 7.1 2,45 11, Max. height: 12,3 m 8 25 kg 2,45 13,2 with High Rig 14 m 4 39 Max. height: 11,8 m 30 kg 8.1 2, with High Rig 13,4 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 197 REMOTE HEAD / CRANE / DOLLY

198 Platform PANTHER FOXY PRO kg Max. height: 3,7 m 1 2,45 2, kg Max. height: 4,9 m 2,45 4, kg Max. height: 6,1 m 2,45 5, kg Max. height: 7,3 m 2,45 7,3 The measures are in meters (m) Counterweight Panther: CAD 17 kg 198 REMOTE HEAD / CRANE / DOLLY

199 PANTHER FOXY Remote Head 80 kg 1 1,9 8 1,7 2,5 Max. height: 3,5 m 2 80 kg 1,9 16 1,7 4 Max. height: 4,7 m kg 2,1 16 1,7 4 Max. height: 4,7 m 80 kg 3 1,9 25 1,7 5,5 Max. height: 4,7 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 199 REMOTE HEAD / CRANE / DOLLY

200 Remote Head PANTHER FOXY kg 2,1 27 1,7 5,5 Max. height: 3,5 m 4 50 kg 1,9 30 1,7 7 Max. height: 7,3 m kg 2,1 30 1,7 7 Max. height: 7,3 m kg 2,1 30 1,7 7 Max. height: 7,3 m kg 2,1 30 1,7 8,5 Max. height: 8,5 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 200 REMOTE HEAD / CRANE / DOLLY

201 Platform PANTHER FOXY 1,9 30 1,7 2,5 250 kg Max. height: 3,5 m kg 1,9 30 1,7 4 Max. height: 4,7 m kg 2,1 30 Max. height: 4,7 m 1, kg 2,1 30 1,7 4 Max. height: 4,7 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 201 REMOTE HEAD / CRANE / DOLLY

202 PANTHER FOXY ADVACED Remote Head 4 2,45 2,7 80 kg Max. height: 3,9 m ,45 4,2 80 kg Max. height: 5,1 m kg Max. height: 6,3 m 2,45 5, ,45 5,8 80 kg Max. height: 6,3 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 202 REMOTE HEAD / CRANE / DOLLY

203 Remote Head PANTHER FOXY 24 2,45 7,2 80 kg Max. height: 7,5 m ,45 8,7 80 kg Max. height: 8,7 m kg Max. height: 9,9 m 2,45 10, Max. height: 11,1 m 40 kg 7 2,45 11, Max. height: 10,6 m 50 kg 7.1 2,45 11, Max. height: 12,3 m 20 kg 8 2,45 13,2 with High Rig 14 m 8 30 Max. height: 11,8 m 25 kg 8.1 2,45 12,6 with High Rig 13,4 m The measures are in meters (m) Counterweight Panther: CAD 17 kg 203 REMOTE HEAD / CRANE / DOLLY

204 Platform PANTHER FOXY 15 2,45 2,8 250 kg Max. height: 3,9 m ,45 4,3 140 kg Max. height: 5,1 m kg Max. height: 6,3 m 2,45 5, kg Max. height: 7,5 m 2,45 7,3 The measures are in meters (m) Counterweight Panther: CAD 17 kg 204 REMOTE HEAD / CRANE / DOLLY

205 GFM GF-8 Dolly 0,97 0,85 0,62 0,36 1,27 1,53 ATTENCION! Size dolly are equal for any version. The measures are in meters (m) 205 REMOTE HEAD / CRANE / DOLLY

206 Remote Head 237 Max. height: 6,75 m GFM GF-8 80 kg 1 2,1 2,20 6, Max. height: 7,15 m 80 kg 2,1 2,20 7,12 3 Max. height: 7,90 m 50 kg 476 2,1 2,20 8 Platform kg 1,8 2,20 2,53 Max. height: 3,30 m The measures are in meters (m) The counterweight are in kilogram (kg) 206 REMOTE HEAD / CRANE / DOLLY

207 Platform kg GFM GF-8 2 2,1 2,20 3,5 Max. height: 4,11 m kg 2,1 2,20 4 Max. height: 4,53 m 4 Max. height: 5,34 m kg 2,1 2,20 4,98 5 Max. height: 5,75 m kg 2,1 2,20 5,48 The measures are in meters (m) The counterweight are in kilogram (kg) 207 REMOTE HEAD / CRANE / DOLLY

208 GFM GF-6 Dolly 0,94 0,36 1,28 ATTENCION! Size dolly are equal for any version. The measures are in meters (m) 208 REMOTE HEAD / CRANE / DOLLY

209 Remote Head kg GFM GF-6 1 0,75 3 Max. height: 4,75 m kg 2 0,75 3,75 Max. height: 5,40 m kg 3 0,75 4,50 Max. height: 5,90 m kg 4 0,90 4,50 Max. height: 5,90 m kg 5 0,75 5,25 Max. height: 6,50 m The measures are in meters (m) The counterweight are in kilogram (kg) 209 REMOTE HEAD / CRANE / DOLLY

210 Remote Head GFM GF Max. height: 6,50 m 60 kg 6 0,90 5, Max. height: 7,20 m 40 kg 7 0,90 6 Platform kg 0,75 1,50 Max. height: 3,20 m kg 0,75 2,25 Max. height: 3,90 m kg 0,90 3 Max. height: 4,45 m The measures are in meters (m) The counterweight are in kilogram (kg) 210 REMOTE HEAD / CRANE / DOLLY

211 MOVIE PEOPLE BAMBOO Bamboo is a modular crane with high maneuverability, it is easy to assemble and disassemble. Sturdy but light, Bamboo is built in aeronautical alloys. Remote Head 150* 30 kg 5.2 1,8 1,15 4 Max. height: 4,77 m *With MD and BTS heads kg 1,8 1,40 4 Max. height: 4,56 m kg 2,8 1,91 5 Max. height: 5,66 m The measures are in meters (m) The counterweight are in kilogram (kg) 211 REMOTE HEAD / CRANE / DOLLY

212 Remote Head MOVIE PEOPLE BAMBOO 230* 30 kg 7.5 2,8 1,41 6 Max. height: 6,31 m *With CAMS 2 Axes kg 2,8 Max. height: 6,22 m 1,91 6 Max. height: 6,80 m kg 2,8 2, Max. height: 8 m kg 2,8 2,41 *With CAMS 3 Axes: 220 kg With CAMS 2 Axes: 200 kg 7 ATTENTION! Assemble tie-rod towards the counterweight Assemble side rods. The measures are in meters (m) The counterweight are in kilogram (kg) 212 REMOTE HEAD / CRANE / DOLLY

213 Remote Head MOVIE PEOPLE BAMBOO Max. height: 8,56 m kg 2,8 2, Max. height: 7,45 m kg 2,8 2, Max. height: 7,45 m kg 2,8 2,91 10 The measures are in meters (m) The counterweight are in kilogram (kg) 213 REMOTE HEAD / CRANE / DOLLY

214 MOVIETECH FELIX DOLLY 36 kg Width 72 cm Lenght 125 cm Payload 900 kg Track width 62 cm ATTENTION! Size dolly are equal for any version. Remote Head 240 1,56 3,27 80 kg Max. height: 3,68 m 1 60 kg ,56 4,26 Max. height: 4,50 m Platform kg 1 1,56 1,70 Max. height: 2,75 m kg 2 1,56 2,45 Max. height: 2,75 m The measures are in meters (m) The counterweight are in kilogram (kg) 214 REMOTE HEAD / CRANE / DOLLY

215 JIMMY JIB TRIANGLE Jimmy Jib Triangle is an aluminum crane with triangular sections of the arm. Complete of the remote head, the latter has a 180 movement of excursion. Remote Head 29,4 kg Standard 1,30 1,80 Max. height: 3,90 m Standard PLUS 27,2 kg 1,30 2,70 Max. height: 4,80 m Max. height: 5,70 m Giant 23 kg 1,30 3,60 The measures are in meters (m) 215 REMOTE HEAD / CRANE / DOLLY

216 Remote Head JIMMY JIB TRIANGLE Max. height: 7 m Giant PLUS 23 kg 2 1,30 4,50 Super Max. height: 7,60 m 23 kg 2 5,40 Max. height: 9,10 m Super PLUS 23 kg 2 7,30 Extrime Max. height: 10,60 m 23 kg 2,8 9,10 The measures are in meters (m) 216 REMOTE HEAD / CRANE / DOLLY

217 EGRIPMENT SKY KING Remote Head DOLLY Height Coloumn height Wigth Lenght 45 cm 155 cm 125 cm 165 cm ATTENTION! Size dolly are equal for any version. 150 kg 1 3 8,70 Max. height: 8,60 m 2 Max. height: 10,14m 100 kg 3 9,96 Platform 1 3,35 5, kg Max. height: 5,88 m The measures are in meters (m) 217 REMOTE HEAD / CRANE / DOLLY

218 EGRIPMENT TULIP Remote Head DOLLY Height Coloumn height Wigth Lenght 125 kg 45 cm 155 cm 125 cm 165 cm ATTENTION! Size dolly are equal for any version ,95 Max. height: 6,60 m 2 65 kg 2 8,34 Max. height: 8,60 m Platform kg 2 3,63 Max. height: 3,90 m The measures are in meters (m) 218 REMOTE HEAD / CRANE / DOLLY

219 EGRIPMENT PICCOLO Remote Head DOLLY 32 kg Width 90 cm Lenght 93 cm Payload 114 kg Track width 62 cm ATTENTION! Size dolly are equal for any version. 65 kg 2,13 4,50 Max. height: 4,20 m Platform 250 kg Max. height: 2,60 m 1,78 2,82 The measures are in meters (m) 219 REMOTE HEAD / CRANE / DOLLY

220 SWISS JIB Remote Head 7 90 kg 1 2,30 3 Max. height: 3,40 m kg Max. height: 4,80 m 2,30 5 The measures are in meters (m) Counterweight CineJib: CAD kg 220 REMOTE HEAD / CRANE / DOLLY

221 Remote Head JIMMY JIB TRIANGLE kg 3 2,30 7 Max. height: 6,20 m 4 40 Max. height: 7,60 m 70 kg 2, Max. height: 9 m 70 kg 2, Max. height: 10,40 m 6 70 kg 2,30 13 The measures are in meters (m) Counterweight CineJib: CAD kg 221 REMOTE HEAD / CRANE / DOLLY

222 MOVIE GRIP MODULAR Remote Head 1 40 kg 0,68 0, kg 0,98 1, kg 1,28 1, kg 1,58 2, kg 2,18 4,98 The measures are in meters (m) 222 REMOTE HEAD / CRANE / DOLLY

223 MOVIE GRIP ROBIN Remote Head 100 kg 1 3,40 6,50 Max. height: 5,50 m 80 kg 3,40 7 Max. height: 5,50 m Max. height: 8,40 m 60 kg 3,40 8,40 The measures are in meters (m) 223 REMOTE HEAD / CRANE / DOLLY

224 Platform MOVIE GRIP ROBIN 3,40 3, kg Max. height: 3,40 m 1 2 3,40 4, kg Max. height: 4,60 m MOVIE GRIP FOX 250 kg 3,40 3,40 Max. height: 4,50 m The measures are in meters (m) 224 REMOTE HEAD / CRANE / DOLLY

225 ABC PRODUCT TRAVELER Traveler Crane is a lite crane aesy to assemble and to use. Design for mini DV and HDV cameras, it is suitable from cinema to TV show. Remote Head 15 kg 1 1,02 2,15 Altezza MAX: 4,50 m 2 11 kg 1,02 3,45 3 7,5 kg 1,02 3,86 Altezza MAX: 4,52 m The measures are in meters (m) 225 REMOTE HEAD / CRANE / DOLLY

226 MOVIE PEOPLE JUNIOR Junior is a lite and modular crane, easy to transport and assembly, on the nose mount you can mounted a fluid head (fig.1) or remote head (fig.2). It can be equipped with a virtual kit, composed of high resolution encoders on each axis, PAN/TILIT fulcrum, PAN/TILIT head, focus and zoom, which read the position of the crane and send it to the Virtus HD card. The Virtus HD card processes the major protocols (... Radamec R...) And can process the position by giving the trigonometric point in space. The arm can also be equipped with an encoderized track. 25 kg 0,3 0,5 2 (fig. 1) (fig. 2) 226 REMOTE HEAD / CRANE / DOLLY

227 KESSLER KC-LITE 8.0 Data Sheet Payload Max. lenght Min. lenght Arm extension Vertical mov. Counterweight 4,5 kg 2,4 m 1,2 m 1,7 m 3,2 m 3,4 kg POLECAM WITH CAMERA HD Data Sheet Arm extension PAN-TILT IRIS Camera Resolution SNR Gen-Lock 1,2/6 m Joy-stick remote Remote 3CCD 750 lines 63 db BNC IN Colorcorrection 6 vectors Gain Shutter Gamma Paint Chroma Level White balance Black, Hue SDI out Optional Lens 4mm wide-angle lens Camera HD Optional Monitor 5 TFT CCZ out 26 pin Audio XRL IN e OUT Environmental microphone Video out Composito Component RGB S Video Alimentazione 220 VAC - 12 VDC 227 REMOTE HEAD / CRANE / DOLLY

228 MOVIETECH MAGNUM Data Sheet Size (HxWxL) Max. payload (column extended) Max. payload (column retracted) Max. height (EuroAdapter) Min. height (EuroAdapter) Lift range Shortest lift time Max. power consumption Battery power when fully charged Charging time with charger Charger with auto volt switch and overcharge protection Battery performance Battery capacity 80x64x64 cm 78 kg 300 kg 800 kg 184 cm 0,80 m 68 cm 3.1 s / 48 V 4.5 s / 24 V 30 A 150 ca. 1 A = 8 h V 24/48 V 8 Ah/16 Ah 228 REMOTE HEAD / CRANE / DOLLY

229 MOVIETECH MAGNUM MAGNUM + DUO JIB Payload: Height mode Low mode Standard mode Max. height (EuroAdapter) Min. height (EuroAdapter) Lift range Remote Jib 200 / 440 kg 220 / 484 kg 250 / 550 kg 275 cm 26 cm 150 cm Optional MAGNUM + MINI JIB Payload Max. height (EuroAdapter) Min. height (EuroAdapter) Lift range 80 kg 230 cm 70 cm 150 cm MAGNUM + LOW RIG Payload Max. height (EuroAdapter) Min. height (EuroAdapter) Lift range 130 kg 78 cm 90 cm 68 cm 229 REMOTE HEAD / CRANE / DOLLY

230 J.L. FISHER MODEL 11 The Model 11 Dolly is engineered and manufactured to meet the demanding production needs of the motion picture, television and video industries. Compact size, three-way steering and a solid lift beam give operators a wide variety of options. Leggero e dimensioni ridotte. Lightweight and small size Steering wheels for three movements: tracking shot, convencional or rotation on axis. Turning radius reduced. Mechanical compensation of the steering wheel. Self-control system on track Self-lubricating idraulic arm. Two minute for recharged hydraulic arm. Self-centering steering knob Hydraulic arm controls with safety lock Manual hydraulic pump. Lift range indicator. Sliding and padded seats. Pneumatic wheels. Brakes on the four wheels activated by a single lever. Mitchell mount on Standard Level Head (SLT). Battery compartment. Battery connections for camera cables. Six seats are possible. Removable thrust struts with hooks. 90 kg of flow on the hydraulic arm. Seven lifts for system charge. You will found the "DATA SHEET" and "DRAWING" in the next pages 230 REMOTE HEAD / CRANE / DOLLY

231 Data Sheet Max. lift beam elevation with Standard Level Head (SLE) Min. lift beam elevation with Standard Level Head (SLE) Min. lift beam elevation with Low Level Head (LHE) Vertical beam travel Lift beam capacity Length Width - fully operational steering (wheels in) Width - fully operational steering (wheels out) Height (operating) Height (folded) Minimum turn radius (round steering) Minimum turn radius (conventional steering) Carrying weight Maximum Dolly load capacity Lifts per system charge 7 129,858 cm 34,925 cm 7,62 cm 84,773 cm 90,72 kg 101,6 cm 51,753 cm 65,405 cm 100,648 cm 58,738 cm 41,116 cm 85,09 cm 139,25 kg 408,23 kg The measures are in centimeters (cm) 231 REMOTE HEAD / CRANE / DOLLY

232 J.L. FISHER MODEL 10 Recognized as the industry standard, the Model 10 Dolly is manufactured from the highest quality materials and components to meet the demanding needs of the motion picture, television and video industries. This stable, reliable Dolly offers operators versatile features and a wide variety of accessories. Leggero e dimensioni ridotte. Lightweight and small size Steering wheels for three movements: tracking shot, convencional or rotation on axis. Turning radius reduced. Mechanical compensation of the steering wheel. Self-control system on track Self-lubricating idraulic arm. Two minute for recharged hydraulic arm. Self-centering steering knob Hydraulic arm controls with safety lock Manual hydraulic pump. Lift range indicator. Sliding and padded seats. Pneumatic wheels. Brakes on the four wheels activated by a single lever. Mitchell mount on Standard Level Head (SLT). Battery compartment. Battery connections for camera cables. Six seats are possible. Removable thrust struts with hooks. 227 kg of flow on the hydraulic arm. Seven lifts for system charge. You will found the "DATA SHEET" and "DRAWING" in the next pages 232 REMOTE HEAD / CRANE / DOLLY

233 Data Sheet Max. lift beam elevation with Standard Level Head (SLT) Min. lift beam elevation with Standard Level Head (SLT) Min. lift beam elevation with Low Level Head (LHT) Vertical beam travel Lift capacity Length Width Height (operating) Height (folded) Minimum turn radius (round steering) Minimum turn radius (conventional steering) Carrying weight Maximum Dolly load capacity Lifts per system charge 7 159,068 cm 34,925 cm 7,938 cm 119,063 cm 226,8 kg 140,97 cm 67,31 cm 98,108 cm 63,5 cm 55,88 cm 11,76 cm 190,51 kg 544 kg The measures are in centimeters (cm) 233 REMOTE HEAD / CRANE / DOLLY

234 DOLLY HAWK Datasheet Lenght max/min 122,5 / 63,8 cm Lenght max/min 55 / 88,8 cm Height max/min 127,5 / 38,8 cm Lift range 88,8 cm Min. radius rotation 87,5 cm Head's payload 45 kg Arm's payload 100 kg Pressure max/min 2900 / 890 psi Lifts per system charge 3 (without accessories) 120 kg Recharging time 45 s Power supply 220/50 Hz This dolly is characterized by great stability, manoeuvrability, manageability and versatility Engineered and designed with the latest technology in structural materials and surface finishes, tested thoroughly to ensure an accurate and reliable operation. 234 REMOTE HEAD / CRANE / DOLLY

235 DOLLY FALCON This dolly is characterized by great stability, manoeuvrability, manageability and versatility Engineered and designed with the latest technology in structural materials and surface finishes, tested thoroughly to ensure an accurate and reliable operation. Data Sheet Lenght max/min 110 / 85 cm Lenght max/min 875 / 55 cm Height max/min 116 / 42,5 cm Lift range 73,8 cm Min. radius rotation 61,3 cm Capacità di sollevamento 43 kg Pressione di lavoro max/min 1845 / 885 p.s.i Lifts per system charge 4 (without accessories) 80 kg Recharging time 70 s Power supply 220/50 Hz T-DOLLY Size (WxL) 0,62x1,10 m 30 kg Wheels 3/4 235 REMOTE HEAD / CRANE / DOLLY

236 DOLLY SEA GULL Arm's payload 30 kg Lift range 3,35 Misure (HxWxL) 1,11x0,69x1,10 m Peso 63 kg ESPACE Hydraulic and electric dolly 1x Power cable 1x valve controll 2x Handlebars 5x Footrests 2x Seats 2x Extension for seats 1x Extension for seats 1x EuroAdapter 1x Bracket 90 cm 1x Bracket 80 cm 1x 3 Way Leveller XL Mitchell to EuroAdapoter TWISTER DOLLY Misure(HxW*/W*xL) *Narrow gauge **Tracking gauge Track wide Inner turning radius Outer turning radius Payload 19,5x78,6/86,6x86,6 cm 62 cm 42 cm 116 cm 270 kg 236 REMOTE HEAD / CRANE / DOLLY

237 DOLLY LIGHT DOLLY LOSMANDY STUDIO DOLLY SIERRA PORTABLE DOLLY GOBLIN IDRAULIC ARM For Goblin MINIGRU For Goblin 237 REMOTE HEAD / CRANE / DOLLY

238 DOLLY CRICKET ELEMAK RISCIÒ FOCUS Dolly WILLY GO Dolly FLAT DOLLY 100 FLAT DOLLY 80 FLAT DOLLY REMOTE HEAD / CRANE / DOLLY

239 DOLLY SKATER MINI With engine HI-LO PLATFORM LOW BOY 239 REMOTE HEAD / CRANE / DOLLY

240 CAMBLOCK ADVENTURE CAMBLOCK systems are feature rich with many unique capabilities. We listen to our customers, and many of our features have been added as feature requests over the years from our valued professional customers. Many of our features are unique in the industry and ahead of the competition. Adventure uses CAMBLOCK s new wireless control system. This powerful Arm M4 control system can coordinate multiple axes of movement, activate cameras, communicate with Red Epic, sync via genlock, accept external IO, and more. Our powerful Android tablet software is used to control and program the Adventure, but all settings and movement profiles are stored internally so a constant connection between tablet and system is not required. Once a shot, movement, or sequence is begun, the adventure is self sufficient and does not need any external device to continue operation. Real-Time capabilities: Adjustable and repeatable motion playback Real time activation of cameras Genlock sync for frame accuracy every time Camera pre-roll and post-roll control Local or global speed adjustments of move NEW Real-time recording and repeating of moves (future feature) Multi-speed compositing Time Lapse capabilities Continuous Motion Timelapse Move-Shoot-Move Timelapse Up to 16 exposures Sequential timelapses Basic exposure ramping You will found the "DATA SHEET" in the next page 240 REMOTE HEAD / CRANE / DOLLY

241 Data Sheet Control interface System is controlled through the camblock application for Android tablets ios control application under development Connect wireless through b WiFi with integrated access point Connect wired through a RS-485 tablet Interface Once a move is started the system is self running, a constant tablet connection is not required Onboard I/O Power button on/off control Camera Control socket (10 pin Lemo) - 2 close circuit type camera triggers (DSLR Canon, Nikon, Sony, etc) v type camera trigger (RED Epic, Phantom) - 1 RS-232 RX/TX (RED Epic) - 2 GPIO (RED Epic) USB socket for complete DSLR control (future feature) Genlock BNC connector for frame accurate real-time motion Control socket (6 pin Lemo) for wired control (requires tablet wired interface) Motor network socket (7pin Lemo) for additional axes expansion Expansion port for future upgrades Power socket (2 pin Lemo) Graphic LCD with setup menu and control pad Power DC power input via 2pin Lemo socket Accepts +12vdc to +20vdc, Pin1 = Positive, Pin2 = Negative Draws 300ma at idle, up to 3amps in motion Interchangeable battery mounting plates available (Sony V Mount or Gold Mount) Real time voltage and amperage monitoring for battery tracking Max speed Pan 250 /s Tilt 125 /s Dolly 18 /s Max speeds depend upon battery voltage, camera weight and track inclination Custom speeds may be possible with additional lead time Drive Train 20 watt coreless DC servo motors with optical feedback PID control Servo Accuracy: Between 1/100th and 1/600th of a degree, depending on speed and balance of load Custom precision gears and pulleys made from aluminum, stainless steel and composite materials Gears hand mated for almost zero backlash Hard limit switches for over-travel protection and self calibration 241 REMOTE HEAD / CRANE / DOLLY

242 FLOTCAM DC SLIDER DC Slider combines the function of the slider, Mini Jib and tower. Once set up, the system can instantly change its function from slider to Mini Jib and back thanks to its unique construction. (fig.1) MotionControl Developed specifically for use with the DC Slider, you ll enjoy endless possibilities of camera movement and control. MotionControl allows manual and programmed movements. Every movement, manual or programmed, may be recorded and stored for later use. There are nine (fig.2) (fig.3) Data Sheet Slider (fig.1) Max. lenght 190 cm Rails lenght 150 cm Payload 32 kg (truck) 18 kg (fulcrum) 6 kg Counterweight 32 kg Tripod's mount Mitchell / 150 mm Mini Jib (fig.2) Max. height 250 cm (w/tripod 150 cm) Lift range 134 cm Payload 32 kg PAN/TILT 360 / 120 Tower (fig.3) Max. lenght Rails lenght Payload 200 cm 150 cm 32 kg 242 REMOTE HEAD / CRANE / DOLLY

243 DOLLY ACCESSORIES SLIDER RONFORD cm GF-BANGI SLIDER 1/2 m SLIDER 30 On modular tracks MINI JIB PANTHER U-BANGI QUADRATO GFM COMBI-RIG U-BANGI 243 REMOTE HEAD / CRANE / DOLLY

244 DOLLY ACCESSORIES SPECIAL WHEELS FOR CURVES 90 SKATE WHEELS - Special wheels for dolly - Special wheels for flat dolly FLEXI-MOUNT VACUUM BAG 244 REMOTE HEAD / CRANE / DOLLY

245 DOLLY ACCESSORIES LEVELING HEAD MITCHELL/BAZOOKA ADAPTER EUROADAPTER FOR PIPE Ø 50 BRACKET EUROADAPTER Rocker Plate Hidraulic coloumn Elemack round base Camera cheese plate Camera wedge + offset 150 mm Low Shot Plate Base bazooka a gas Movietech Elemack base EuroAdapter Offset EuroAdapter Triangular bracket + set bazooka risers 245 REMOTE HEAD / CRANE / DOLLY

246 PICCHIO Data Sheet Platform size 850 x 700 x 1100 cm Payload 120 kg Operator 1 Arm Telescopic Arm's angle 0 / +75 Pantograph -15 / +60 Superstructure rotation 300 (not continuos) Tank's capacity 25 L Pump 10 L System pressure 170 bar Max. slope 25% Max. wind suppression 12 m/s Voltage 12 V Max. manual force 40 da Maneuvers speed 0,4 m/s Max. working height 12 m Max. extent of reach 6,50 m 1450 kg Drive Tracked 246 REMOTE HEAD / CRANE / DOLLY

247 GRIP EQUIPMENT 247

248 GRIP EQUIPMENT Cubelite 200x200x210 cm Cubelite 150x150x210 cm Cubelite 120x120x120 cm Cubelite 90x90x90 cm With rimovibile backside cloth Cubelite 58x58x58 cm D.O.P Choice Grid 2x2 D.O.P Choice Grid 4x4 D.O.P Choice Grid 6x6 Mounting stirrup mirror reflector board 120x80 Mounting stirrup gold reflector board 120x80 Hard/Soft Mounting stirrup silver reflector board 120x80 Hard/Soft Lastolight blue/green chroma key 150x180 Lastolight white - gold - silver 2x1-1x1 White solid cloth 2x2 White solid cloth 4x4 White solid cloth 6x6 Black solid cloth 2x2 Black solid cloth 4x4 Black solid cloth 6x6 Black solid cloth 2x2 (2 nd choice) Black solid cloth 4x4 (2 nd choice) Black solid cloth 6x6 (2 nd choice) 248 GRIP EQUIPMENT

249 GRIP EQUIPMENT White artificial silk 2x2 White artificial silk 4x4 White artificial silk 6x6 Griflon 2x2 Griflon 4x4 Griflon 6x6 Single/Double white cloth 2x2 Single/Double white cloth 4x4 Single/Double white cloth 6x6 Single/Double black cloth 2x2 Single/Double black cloth 4x4 Single/Double black cloth 6x6 Gold 2x2 Gold 4x4 Gold 6x6 Silver 2x2 Silver 4x4 Silver 6x6 Rosco digital screen 2x2 Rosco digital screen 4x4 Rosco digital screen 6x6 Blue croma key 2x2 Blue croma key 4x4 Blue croma key 6x6 Green croma key 2x2 Green croma key 4x4 Green croma key 6x6 Ultrabounce 2x2 Ultrabounce 4x4 Ultrabounce 6x6 249 GRIP EQUIPMENT

250 GRIP EQUIPMENT Muslin unbleached 2x2 Muslin unbleached 4x4 Muslin unbleached 6x6 Chequerboard 2x1 Chequerboard 2x2 Chequerboard 4x4 Rain cover 2x2 Rain cover 4x4 Rain cover 6x6 Rosco Soft Frost 2x2 ½ - FULL Rosco Soft Frost 4x4 ½ - FULL Hi light 4x4 Hi light 6x6 Sunfire 2x2 Sunfire 4x4 Sunfire 6x6 White solid cloth 9,70x9,20 White solid cloth 12x10 Black solid cloth 14x10 (without eyelets) Gold 1,80x1,80 Silver 1,80x1,80 Bemberg 9x9 Bemberg 12x6 Bemberg 10x12 Blue back 12x10 Blue back 12x12 Green back 13x10 (without eyelets) Alluminium frame 2x2 Alluminium frame 4x4 Alluminium frame 6x6 250 GRIP EQUIPMENT

251 GRIP EQUIPMENT Certified alluminium scaffolding 2 m to 6 m (Base: 1,50x2 m) Alluminium scaffolding 1,96 m to 7,10 m (Base: 1,60x0,80 m) Alluminium scaffolding 1,70 m to 6,7 m (Base: 2x1,05 m) SCAFFOLDING ROLLER 1,96 m to 7,10 m Base: 1,60 x 0,80 m LADDERPOD 3,30 m to 6 m Base: 1,60 x 1,40 m LADDERPOD 2,40 m to 3,60 m Base: 1,60 x 1,40 m 251 GRIP EQUIPMENT

252 GRIP EQUIPMENT FIXED PLATFORM (VARIABLE HEIGHT) Base: 2 x 1 m ADJUSTABLE PLATFORM Base: 2 x 1 m TRIANGULAR PLATFORM 0,50 to 1 m Base: 1 x 1 x 1 m Scaffolding 1,50 m (Base: 1,70x1,50 m) Scaffolding 1,50 m (Base: 1,50x1,50 m) Electric hoist Kg Manual hoist (set da 2) Control unit x8 hoists + kaypad Control unit x4 hoists + kaypad Control unit x2 hoists + kaypad Alluminium Truss 30x30x290 cm Alluminium Truss 30x30x190 cm Alluminium Truss 30x30x90 cm Alluminium Truss 30x30x50 cm Corner for Alluminium Truss Alluminium Truss 30x290 cm Alluminium Truss 30x190 cm Alluminium Truss 30x90 cm 252 GRIP EQUIPMENT

253 GRIP EQUIPMENT Varipole L Varipole M Varipole S Extencion for varipole Crosspole 4 m Extencion for crosspole da 6 m Cubo scorrevole 40x40 Portamonitor Cuple of spreader Cable duct 1 m Large Cable duct da 1 m Small Imbragatura di sicurezza Pulley simple/double Truss holder Screwdriver Bands for truss Bealt ratchet Set of 20 pin clamps Chains Snap-hooks Telescopic ladder 4 m Telescopic ladder 3 m Telescopic ladder 2 m Stepladder 4 m Stepladder 3 m Stepladder 2 m Counerwheight 32 kg Counerwheight 10 kg Counerwheight for dolly 12 kg 253 GRIP EQUIPMENT

254 GRIP EQUIPMENT Magliner Senior Magliner Junior Truck pneumatic wheels Box of wedges Avenger Lp Eye coupler Avenger Lp Swivel Eye coupler Aliscaf Carpenter clamps 1 m / cm Alluminium trunk 85x45x35 cm Cocolores 2x1 Cocolores 1x1 Filter holder frames 200x x x100 Alluminium Filter holder frames 200x x x100 Set 5 apple box Paganini Poly holder (fork) Compressor 220 V Barella 2x1 m Steam-cleaning machines Iron + Ironing board No parking sign Signaling pin Signage hurdle Makeup mirror Folding table 180x80 cm Garment stand Director's chair Bench Ciak Megaphone Umbrella Covers 254 GRIP EQUIPMENT

255 FX MACHINES 255

256 UE ST-BASE 1000 MKII WIND MACHINE Datasheet Size (HxWxK) Power Speed control through Wind output speed Output speed with UE HeadWind 164x122x206 cm 300 kg 380V 50 Hz - 22 Kw 58A DMX km/h 140km/h The measures are in centimeters (cm) 256 FX MACHINES

257 WIND MACHINES GASOLINE ENGINE FAN Ø 1,55 m FAN Ø 70 cm FAN Ø 50 cm FAN Ø 30 cm 257 FX MACHINES

258 FOG MACHINES ICE FOG GENERATOR MDG MAX 5000 NEBULA FX MACHINES

259 FOG MACHINES SMOKE FACTORY SCOTTY II JEM ZR24/7 MDG ATMOSPHERE With CO² tank FOG HAZE With CO² tank JEM ZR44 HI-MASS ROSCO V-HAZER 259 FX MACHINES

260 FOG MACHINES ROSCO VAPOUR EXTERIOR SMOKE MACHINE ROSCO 1700 ROSCO 1600 ROSCO FX MACHINES

261 SNOW MACHINES UE ST-BASE 1000 MKII + SNOW HEAD The EU ST-Snow Machine 1000 is one powerful snow machine. And equipped with a system that allows you to recreate a real blizzard, ideal for covering large areas. Datasheet (SNOW HEAD) Power Coverage (LxW) Liquid comsumption Tank size (LxWxH) Size (LxWxH) Wheight 330 V - 50/60 Hz - 14 kw - 4x6,1 A 30x15 m 60 to 120 l/h 23x72x85 cm 206x122x164 cm 45,3 kg SNOW CANNON SNOW MACHINE The measures are in centimeters (cm) 261 FX MACHINES

262 REVOLVING PLATES REVOLVING PLATE (VARIABLE SPEED) Payload 2500 kg Thrust 0/8 r/min Max. diameter ø 4980 mm Min. diameter ø 1800 mm Off the ground 300 mm REVOLVING PLATE Variable speed Payload 1000 kg REVOLVING PLATE with ENGINE Variable speed Payload 80 kg 262 FX MACHINES

263 REVOLVING PLATES REVOLVING PLATE with ENGINE Variable speed Payload 10 kg REVOLVING PLATE with ENGINE Variable speed Payload 2 kg REVOLVING PLATE with ENGINE Ø 120/60 cm Payload 80 kg VARIUS FX MACHINES Lightning machine Bubble machine Fire machine Foam machine Confetti machine Incense 263 FX MACHINES

264 VARIUS EQUIPMENT 264

265 VARIUS EQUIPMENT VAPORIZER GAS HEATER GAZEBO 6x3 m GAZEBO 3x3 m With side coverage 265 VARIUS EQUIPMENT